Power Equipment. Brushcutters Blower/Vacs Hedgetrimmers Chainsaws Lawn Edgers Augers Drills Pumps Multi-tools Pole Pruners/Trimmers

Transcription

1 Australia s first and still the best: When buying a Tanaka product, you know that you are not only getting the best, but also protecting your investment in a machine that will provide many years of reliable service. Power Equipment 5LIMITED Domestic WARRANTY* YEAR 1 Year Commercial Warranty Brushcutters Blower/Vacs Hedgetrimmers Chainsaws Lawn Edgers Augers Drills Pumps Multi-tools Pole Pruners/Trimmers

2 Brushcutters Light To Medium Duty Models Weights are without linehead. TBC-225C TBC-230BS kg - 4.1/4.3 TBC-225 TBC-230S kg - 4.0/4.4 SmartStart - Feather touch easy starting recoil mechanism.* S models have SmartStart standard. Optional on other models up to TBC-340. (*An oversized spring assisted pulley which effortlessly flick starts, reduces pulling force down to 50% of normal effort.) TBC-270S cm 3-27 kg TBC-270DS cm 3-27 kg TBC-340D kw kg TBC-290 cm 3-28 kw kg TBC-340 kw kg Attachments For straight-shaft single-handled brushcutters. To suit 24 and 26 mm shafts only. 2 Transform to Mini Motorised Hoe TMC-200 Cultivator For aerating/tilling gardens and vegetable patches. Tynes diameter mm 2.3 kg TPS-200 Pruner To reach overhanging branches up to 4 m. Bar Length mm 1.2 kg Hedgetrimmer Transform to Pole Pruner Transform to Pole Total 85 TPH-200 Hedgetrimmer For shaping shrubs, hedges up to 4 m. Cutters Length mm Max. Engine Size - 27cc 1.5 kg

3 Brushcutters Heavy Duty Models Weights are without linehead. Full D-Harness Optional Accessory (Part no ) SUM-500DX cm kw kg Refer back page for more on PureFire. TBC-420PF cm 3-40 kw kg TBC-430PF (shown) cm 3-40 kw kg TBC-550 (shown) cm 3-47 kw kg TBC-4200DX cm 3-40 kw kg Split Shaft Models TBC-230SF kg TBC-270SF cm 3-27 kw kg Attachments SF-GT Trimmer Attachment for both models and Powerheads also sold separately 1.2 kg (trimmer attachment) Split Shaft units easily fit in the boot of a car SF-HT Hedgetrimmer SF-PS Pole Saw SF-MC Mini Cultivator SF-PE Portable Edger Length m Weight kg Length m Weight kg Length mm Weight kg Length mm Weight kg BRAIN head The world s finest autofeed trimmer head. The Tanaka BRAIN autofeed trimmer head automatically senses when more line is needed, always feeds out the perfect length, and keeps engine speed at optimum cutting efficiency. Unaffected by dust or moisture, the BRAIN is extremely reliable and never needs lubrication. Different Heads Available Cut Cord Manual Feed CH-100 CH-300 Tap N Go BF-4 BF-5 3

4 Chainsaws Professional Models ECV-4501* cm 3-43 kw kg Bar length mm ( 18 ) ECV-3801* cm 3-39 kw kg Bar length mm ( 15 ) ECV-5601* cm 3-50 kw kg Bar length mm ( 18 ) All Tanaka chainsaws have turbo force air-filtration system to reduce cleaning time and prolong service life. Heavy Duty *ECV Professional Models are equipped with Decompression Valve to start with 70% less effort Mini Pro Micro Pro TCS-2801S cm kg Bar length mm (10 ) Chain oil supply adjustment TCS-3301S kw kg Bar length mm (12 ) Carburettor H/L screw and idle speed adjustment Heavy Duty Mini Pro TCS-3401 cm 3-34 kw kg Bar length mm (14 ) Pole Saws Finger holder for firm grip and stability Well balanced, ideal for pulling up unit when tree lopping ECS-3351 kw Compact Pro All-Rounder kg Bar length mm (14 ) EXT-200, EXT-300 Extension Kit EXT-200 (600 mm 0.6 kg) NB: Only available for TPH-230S, TPS-2501S, TPS270S TPS-270S cm 3-27 kg Length m Bar length mm (10 ) 4 TPS-200 Attachment for single handle brushcutters (up to 27cc models) 1.2 kg Extension Kit EXT-300 (900 mm 0.9 kg) NB: Only available for TPS-270S NB: Not compatible with Split Shafts.

5 Hedgetrimmers Double Reciprocating Blades 5-Position Twist Handle System THT-210S kw kg Blade mm (26 ) THT-2520S cm 3-24 kg Blade -760 mm (30 ) Tanaka s angled handle provides space between operator s hands and hedges. Works for both left or right hand use. Models THT-210S, THT-2000S and THT-2520S Feature 5-position Twist Handle System Push the lock button to change the an gle of the twist handle. When blades are moving, lock button cannot be pushed. Operator must release the throttle lever before pushing the locking button to change handle position. 180 Twist Handle The cutting angle can be adjusted by loosening the handle locking nut. After adjustment, make sure to retighten nut. THT-2000S kw kg Blade mm (20 ) Left 90 Right 90 Left 45 Right 45 Single Blade Dual Fixed Handles THT-2540 cm 3-24 kg Blade mm (40 ) Pole Hedgetrimmers EXT-200 Extension Kit 600 mm (24 ) 0.6 kg TPH-230SS (Top pic) kg Blade mm (22 ) Shaft m Total length m TPH-230S (Bottom pic) kg Blade mm (20 ) Shaft m Total length m Total TPH-200 Attachment for single handle brushcutters (up to 27cc models) 1.5 kg NB: Not compatible with Split Shafts. 5

6 Blower/ Vacs Backpack Models TBL-7800R (shown) TBL-7800R TBL-4600EX cm 3-65 cm 3-44 kw kw kg kg m 3 /h 612 m 3 /h max air volume max air volume 300 kmph 290 kmph Commercial Backpack Models Features: Multi-point anti-vibe frame for operator comfort Swivel/flexible blower tubes for awkward angles, without having to shift body position Ergonomic front handle Extra large fuel tank for extended use Pivoting engine control arm for easy access to throttle and stop switch. THB-2510N cm 3-24 kg m 3 /h max air volume 285 kmph Lawn Edger Vacuum Attachment Kit THV-200S Converts the THB-2510N to a vacuum unit and includes shredder blade. Shredder Blade Handheld Model Heavy-duty 3-shoe centrifugal clutch protects engine and all driven components 6 TLE Teeth 228 mm cm 3 Special Blade - 51kW Part No kw kg Max cutting depth - 80 mm Single blade (standard) Drop Wheel Kit, Kerb Rider Kit or Combo Kit available 10.5 mm solid-steel drive shaft transmits maximum power to the blade 2:1 reduction gear case maximises cutting torque at the blade World s First Shaft/Gear Driven Edger With Optional Drop Wheel Attachment Unlike the 4-cycle engines used on other edgers, the TLE-550 s 2-cycle engine has no oil reservoir to worry about and provides more power from smaller displacement with less weight and longer life. The unit has no belt to stretch, slip, or break, and for greater cutting power, delivers more torque through a steel drive shaft to the gear case. Also features a two-stage, heavy-duty air filter system that protects the engine in the dustiest conditions. The internal governor system maintains engine speed and helps extend engine life. The extra-large fuel tank comes with a built-in handle for easy lifting. Conveniently located throttle and height adjustment controls provide maximum manoeuvrability. The unique, fingertip height-adjustment and throttle system eliminate sloppy or bulky adjustment levers.

7 Pump Earth Augers Applications* include: Water transfer TCP-25B Mini fire fighter kw kg minutes per tankload Suction size - 25 mm Head - 40 m max. Lift - 8 m max. Volume = 110 l/min *With Neoprene Seal Kit (standard) can be used as diesel transfer pump. DA-95J Dig-Assist Ideal aid for one-person drilling TIA-350S kw kg Max spindle rpm Shaft dia mm Max bit dia mm (6 ) Reduction ratio - 41:1 JEA-50 cm 3-51 kw kg - 13 Max spindle rpm Shaft dia mm Max bit dia mm (8 ) Reduction ratio - 33:1 Acts as stabiliser and trolley (see below). Engine Drills More Portability, Power and Safety Now you can drill anywhere and in any position without the trouble of electrical cords or generators, safely around water, or in wet weather. They are ideal for utility jobs, construction work, and tree planting. For added versatility, dual positioning allows the front handle to be mounted on either side of the unit. TED-250LS Manual Reverse cm 3-24 KW kg Max spindle rpm Chuck cap mm (1/2 ) Max bit dia mm (1 1 /8 ) Power Drill With Lots Of Punch And Manual Reverse Features a unique gear-locking mechanism that locks the gear case allowing the entire unit to be rotated in the event that the bit becomes bound during use. TED-270RS Powered Reverse cm 3-26 KW kg Max spindle rpm Chuck cap mm (1/2 ) Max bit dia mm (1 1 /4 ) The Ultimate In Drill Portability, Power And Convenience Not only does this drill have more power than the competition, it also features another Tanaka innovation: a fully reversible gear case! It can be engaged with the simple push of a lever to instantly extract bits! A centrifugal clutch enables the engine to idle without the bit turning. TED-262HS* High Speed cm 3-26 KW kg Max spindle rpm Chuck cap mm (1/2 ) Max bit dia mm (1 1 /3 ) The Ultimate Machine for Masonry And Concrete Work Ideal for core drilling up to 100 mm, as well as many jobs in wood and steel with optional 13 mm chuck. *Drill pictured above is shown with optional water swivel (Part No. TED-WETKIT) and core bit available through Diamond Tool specialists. 7

8 Tanaka began as a family company which traces it s roots back to Tanaka is proud of a long history of innovation, especially in the two-cycle engine technology. In 1968, Tanaka appointed Parklands as its distributor. That year, the Tanaka brushcutter and engine drill made their first appearance locally the first time Australia saw such machines. Tanaka makes their engines for the OEM market in Japan and around the world. All Tanaka products are manufactured for dependability, safety and superior performance. Tanaka s production facilities are rated to ISO9001. In the market today, you will find many different quality engines. Some are rated at hours, other hours and top quality engines are at 1000 hours. All Tanaka engines are genuine 1000 hour machines and are tested at the factory prior to shipment. Consider what you receive with a typical Tanaka engine: Needle bearings at each end of the rugged, forged connecting rod ensures long engine life. Two piston-rings maintain compression and reduce blow-by. Heavy-Duty ballbearings support the forged steel crankshaft to deliver more power with less friction. Cylinders are either chrome-plated or Tanaka Best in the Long Run feature a steel sleeve or the piston is nickle-plated: the result is peak compression and power output for many years to come. PureFire Beats Four-Strokes Hands Down! In 1998, Tanaka s PureFire engine was the first in the world to be certified to the stringent CARB (California Air Resources Board) Tier II/Year 2000 regulations. The engine is available on a number of machines. PureFire achieves 70% less emission, 30% less fuel consumption and reduces CO exhaust by 50%. The engine protects the environment and the user who will be inhaling less CO whilst using these machines. CO = Carbon Monoxide PM = Particulate Matter HC+NOx = Hydrocarbon Plus Oxides of Nitrogen **g/hp.h 1968 Parklands Trading Co. Pty Ltd, now Parklands Power Products, is a family owned and operated business, established in Parklands introduced the first brushcutters and engine drills to the Australian market made in Japan, by Tanaka, then known as TAS (Tanaka and Son). 1978, were awarded our first State Government Contract. Over the years, our national distribution evolved. The expansion of our product range took off in the 1990s. 1990s 1990, began distributing Murray ride-on mowers from the USA. Then: 1992, Oleo-Mac chainsaws, brushcutters, earth augers and demolition saws from Italy , introduced Amazone Commercial Groundkeepers from Germany. 1999, Caravaggi chipper/shredders from Italy. 2000, new venture as manufacturer of our own range of Aussie-made Parklander walk-behind mowers. 2001, introduced Grasshopper ZeroTurn commercial mowers from USA. 2002, Vessel petrol impact wrenches from Japan. Parklands Power Products (Aust.) Pty Ltd 106 Belmore Road Nth (P.O. Box 213) Riverwood NSW 2210 Ph: (02) Fax: (02) CONSUMER FREECALL: FREEFAX: marketing@parklands.net , Countax high quality garden tractors from the UK with unique PTO-driven grass collectors. 2003, Parklander brand expanded the range. Now includes brushcutters, blower, hedge trimmer, chainsaws, walk-behinds and zero turns.