CHOICE OF LIFT TABLE. Max load= evenly distributed. Important questions when choosing model and specification of lift table! FUNCTION? CAPACITY?

Transcription

1 Product data Choice of lift table Single scissor Lorry loaders Double vertical scissor lift tables Triple vertical scissor lift tables Double horizontal scissor lift tables Low profile lift tables Load ramps Low profile table U-tables Pallet lifters Lifting trolleys Work positioners Workshop cranes

2 CHOICE OF LIFT TABLE Before deciding which model and design of lift table is required consider all the conditions! Lift tables are used for a wide variety of functions and in many different situations. It is impossible to manufacture a standard model for every application. It is therefore very important to consider the specification at the beginning, so the lift table can be correctly equipped for its purpose. Using the TL 2000 as the base model, the following example shows the type specifications and capacities for Edmolift lift tables: Single scissor TL 2000 = Max load 2000 kgs evenly distributed Double vertical scissor TLD 2000 = Max load 2000 kgs with double lifting height evenly distributed Double horizontal scissor TLH 2000 = Max load 2000 kgs with double length of platform evenly distributed Table to be used intensively HD-equipment for the lift table Edmolift tables comply with all European safety regulations e.g. AFS 1985:13 in Sweden, BS 5323 in Great Britain and VBG 14 in Germany with TÜV approval and in the future CEN. The mark on Edmolft's products confirms they are manufactured in accordance with applicable CE directives. Standard lift tables are equipped to function long and reliably with normal use. Tables meant for intensive use with heavy loads, fast speed, extreme environment and perhaps continuous working shifts, will probably need HD -equipment. As standard our lift tables are supplied with electrics to safety standard IP54. In accordance with safety regulations, lift tables for use in outside areas must be equipped with anti-slip platform surfaces (e.g. tearplate). Tilting platforms must include a fixed method of retaining the load. Max load= evenly distributed! 1000 kgs 1000 kgs Important questions when choosing model and specification of lift table! FUNCTION? CAPACITY? INTENSITY? ACCURACY? ENVIRONMENT? SAFETY? ERGONOMICS? Lifting height Lift stroke (travel) Lowest height Platform length Platform width Power pack integral or remote Electrical requirements Max load Weight distribution Shock loads Revolving and/or side surges Concentrated load Load evenly spread Driving over with trucks or lorries Load moving on a conveyor Speed Frequency of use Number of cycles per year Incorporated in automatic system Limit switch upper-lower Is immediate stop needed Should the table remain in exactly the same position for a long time Outside installation Pit installation Damp Cold Dust Heat Chemicals Demands from authorities Risk of explosions Slip protection Risk of tipping Controlling emergency controls Risk of trapping Are there any accessories which can improve working conditions, e.g. tilting platform with a retaining edge, or a turntable?

3 Single scissor Our most widely used industrial platform. Suitable for both indoor and outdoor use, installed in a pit or operated from the factory floor. TR ,37 75 TR , TL , TL 1000B , TL 1000SS , TL 1000XB , TL ,5 240 TM ,5 340 TM 1500B ,5 400 TM ,5 410 TM 6000* ,0 550 TA ,5 300 TA ,0 650 TA 10000* , TS ,5 565 TS 2000B ,5 615 TS ,0 700 TS 4000B ,0 770 TT ,0 720 TT , TT 10000* , TP , TP , TV 10000* , *Remote Powerpack without cover.

4 Lorry loaders STANDARD DELIVERY: Tabletop in tearplate for antislip protection. Table 2000 kgs 6 mm tearplate Table 4000 kgs 5000 kgs 8 mm tearplate 6 mechanical stops in bottom frame. Platform reinforced in order to allow a lorry to drive over when table is in collapsed position. OPTIONS Remote powerpack with hose for installation under shelter. Auto rising stop (raises when lifting starts). This option requires a 150 mm longer platform. Manual loadflaps (to level and bridge over differences in height). Upper limit switch, which stops the liftstroke at a predetermined height. Self supporting base frame Inspection flap Model TTK 2 TTK 2B TTK 2XB TTK 2LB TTK 2LXB TTK 4 TTK 4B TTK 4XB TTK 4LB TTK 4LXB TPK 5 TPK 5B TPK 5XB Length mm Width mm Liftstroke mm Collapsed height mm Max load kgs - evenly distr Wheels pressure in collapsed position, kgs kw Liftingtime sec mm/sec Base model TT 3000 TT 3000 TT 3000 TT 3000 TT 3000 TT 6000 TT 6000 TT 6000 TT 6000 TT 6000 TP 6000 TP 6000 TP 6000

5 Double vertical scissor lift tables Double vertical scissors enable you to achieve higher liftheight without the need for increased platform sizes. It is essential that these models are securely fixed to the ground, preferably nipple screwed or similar. Capacity Liftstroke Collapsed Length Width Lifting Weight kgs Model kgs mm height mm mm mm time sek kw packing incl. TRD , TRD , TLD , TLD ,5 310 TMD ,5 450 TMD 3000* ,0 580 TSD ,5 900 TTD , TTD , TPD 4000* , TXD , Triple vertical scissor lift tables Triple vertical scissors enable you to achieve higher liftheight without the need for increased platform sizes. It is essential that these models are securely fixed to the ground, preferably nipple screwed or similar. TMT ,5 950 TST ,5 800 *Remote powerpack without cover

6 Double horizontal scissor lift tables The construction of double horizontal lift tables consists of two mechanically synchronised single scissors to give maximum efficiency. Lifting heavy loads over larger work surface. TLH , TLH ,5 525 TMH ,5 700 TMH ,5 835 TMH 10000* , TAH ,5 600 TAH , TSH , TSH , TTH , TTH , TPH , TPH 10000* , *Remote powerpack without cover

7 Low profile lift tables Because of the low closed height no pit is required. Operation by controls mounted on remote or powerpack. TCR 500* , TCB 600* , TCB 1000* , TCB 1000B* , TCB 600H* , TCB 1000H* , TCM 2000* , TCM 2000B* , *Remote powerpack without cover TCB 600/1000 H. It is essential that these models are securely fixed to the ground floor. H = increased liftstroke Load ramps TCR-table length 645, width 600 mm TCB-table 645, 750 mm TCM-table 800, 750 mm

8 Low profile table U-tables Model TUB 1000 for handling standard EUR pallets with loads up to 1000 kgs. No ramp or pit is required. Width between scissors: 580 mm, TUB mm, TUB 1000, TUM TUB 600* , TUB 600H* , TUB 1000* , TUB 1000H* , TUM 2000* , *Remote powerpack without cover TCB 600/1000 H. It is essential that these models are securely fixed to the ground floor. H = increased liftstroke

9 Pallet lifters The pallet lifters enables you to lift heavy loads to the required working height and helps to speed packing and assembly jobs. The pallet lifter is delivered in 3 parts to reduce transport costs. Should be installed with boults with 81 Nm. TSL , TSE , Pallet lifter with tilt 40 left and right TSLN , Column with hydraulic unit for your own applications NB! Consider the risk of jamming! Capacity Liftstroke To be fixed to Boults and moments Lifting- Weight kg Modell kgs mm ground with for installation time sec kw packing incl. Column TSL x M 16 4 x M12/81Nm 13 0,75 160

10 Lifting trolleys For improved ergonomics in industry, shops and warehouses. Capacity kgs with footpump, mechanical crank or battery. Collapsible handles. Rear wheels have rotational/direction locks. Capacity Maximum Collapsed Length Width Platform size Hydraulically elevated Weight kgs Model kgs height mm height mm mm mm mm Power Battery Charger packing incl. TZ , Footpump x 600 Footpump 65 TZ 300V 300, Crank x 600 Crank 65 TZ , Footpump x 600 Footpump 75 TZ 501B 500, Battery x 600 0,8 kw 12V 24Ah 1,5A/230V 90 TZD , Footpump x 600 Footpump 85 TZD 201B 200, Battery x 600 0,8 kw 12V 24Ah 1,5A/230V 100 TZ 1000B 1000, Battery x 800 0,8 kw 12V 24Ah 1,5A/230V 150 Work positioners The ideal lifting device for all applications from pharmceutical to catering, from warehouse to heavy industry wherever loads up to 100 Kgs need lifting. WP, the silent lifting trolley with built-in battery and charger Capacity Maximum Collapsed Length Width Platform size Hydraulically elevated Weight kgs Total height Model kg height mm height mm mm mm mm Power Charger packing incl. mm WP 80AL x V 6, 2Ah 1A/230V WP x V 6, 2Ah 1A/230V

11 Workshop cranes Capacity Length Height Height Width Width Weight kgs Model kgs total mm mast mm forks forks forks packing incl. mm inside outside VKA 10** / VKA **VKA 10 is a folding crane.