Mobile Crane LTM Technical Data
|
|
|
- Britton Grant
- 5 years ago
- Views:
Transcription
1 Mobile Crane LTM Technical Data th Street Maspeth, Queens, NY (718)
2 Liing capacities on telescopic boom x lbs * * over rear TAB / Remarks referring to load charts The tabulated liing capacities do not exceed of the tipping load. The crane s structural steelwork is in accordance with DIN 15018, part 3. Design and construction of the crane comply with DIN 15018, part 2, and with F. E. M. regulations. The overturning limit values take into account wind force 5 = wind speed 20 mph. Liing capacities are given in kips. The weight of the hook blocks and hooks must be deducted from the liing capacities. Working radii are measured from the slewing centreline. The liing capacities given for the telescopic boom only apply if the folding jib is taken off. Liing capacities above lbs / lbs only with additional pulley block/special equipment. 2 LTM
3 Liing capacities on telescopic boom x lbs TAB LTM
4 Liing capacities on telescopic boom x lbs TAB LTM
5 Liing capacities on telescopic boom x lbs TAB x lbs TAB LTM
6 Liing capacities on telescopic boom x lbs TAB LTM
7 Liing capacities on telescopic boom x lbs TAB x lbs TAB LTM
8 Liing capacities on telescopic boom x lbs TAB x lbs TAB LTM
9 Liing heights US LTM
10 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / LTM
11 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / LTM
12 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / LTM
13 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / LTM
14 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / LTM
15 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / LTM
16 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / LTM
17 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / LTM
18 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / x lbs TAB / / LTM
19 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / LTM
20 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / LTM
21 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / x lbs TAB / / LTM
22 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / x lbs TAB / / LTM
23 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / x lbs TAB / / LTM
24 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / x lbs TAB / / LTM
25 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / x lbs TAB / / LTM
26 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / x lbs TAB / / LTM
27 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / x lbs TAB / / LTM
28 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / x lbs TAB / / LTM
29 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / x lbs TAB / / LTM
30 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / x lbs TAB / / LTM
31 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / x lbs TAB / / LTM
32 Liing capacities on the hydraulically or mechanically variable folding jib x lbs TAB / / x lbs TAB / / LTM
33 Liing heights 290 K K US LTM
34 Liing capacities on the hydraulically or mechanically variable folding jib with boom extension x lbs TAB / / LTM
35 Liing capacities on the hydraulically or mechanically variable folding jib with boom extension x lbs TAB / / LTM
36 Liing capacities on the hydraulically or mechanically variable folding jib with boom extension x lbs TAB / / LTM
37 Liing capacities on the hydraulically or mechanically variable folding jib with boom extension x lbs TAB / / LTM
38 Liing capacities on the hydraulically or mechanically variable folding jib with boom extension x lbs TAB / / LTM
39 Liing capacities on the hydraulically or mechanically variable folding jib with boom extension x lbs TAB / / LTM
40 Liing capacities on the hydraulically or mechanically variable folding jib with boom extension x lbs TAB / / x lbs TAB / / LTM
41 Liing heights 310 K K US LTM
42 Liing capacities on the hydraulically or mechanically variable folding jib with boom extension x lbs TAB / / LTM
43 Liing capacities on the hydraulically or mechanically variable folding jib with boom extension x lbs TAB / / LTM
44 Liing capacities on the hydraulically or mechanically variable folding jib with boom extension x lbs TAB / / LTM
45 Liing capacities on the hydraulically or mechanically variable folding jib with boom extension x lbs TAB / / LTM
46 Liing capacities on the hydraulically or mechanically variable folding jib with boom extension x lbs TAB / / LTM
47 Liing capacities on the hydraulically or mechanically variable folding jib with boom extension x lbs TAB / / LTM
48 Liing capacities on the hydraulically or mechanically variable folding jib with boom extension x lbs TAB / / x lbs TAB / / LTM
49 Liing heights K K US LTM
50 Dimensions 48'8" 13'9" 41'6" 7'7" 3'1" D E A H F 9'5" 4" 7'1" 7'8" 8'6" 5'5" 6'7" 5'5" 6'9" 27'9" 12'6" 40'3" 47'4" G F 16'4" 26'5" 10' R = 13'9" C B 16'3" 16'4" 24'7" R1 = 38'10" R = 43'2" R1 = 37'2" R = 41'5" R1 = 34'1" R = 38'7" R1 = 16'9" R = 20'10" 1'10" 15'2" 26'6" 11'2" US R 1 = All wheel steering Dimensions A A B C D E F G H 4" * R 25 13'1" 12'10" 9' 7'7" 6'9" 12'4" * lowered 50 LTM
51 Weights Axle Total weight lbs lbs ) 1) with lbs counterweight Load (kips) No. of sheaves No. of lines Weight lbs Working speeds R 1 R R 25 mph % % Drive infinitely variable Rope diameter / Rope length Max. single line pull /min single line 7/8" / lbs /min single line 7/8" / lbs rpm approx. 65 seconds to reach 82 boom angle approx. 511 seconds for boom extension from LTM
52 Equipment Crane carrier Frame Self-manufactured, weight-optimized and torsion resistant box-type design of hightensile structural steel. Outriggers 4-point supporting system, hydraulically telescopable into horizontal and vertical direction. Automatic levelling of crane. Electronic inclination indicator. Engine 6-cylinder Diesel, make Liebherr, type D846 A7, watercooled, output 370 kw (503 h.p.) at 1900 rpm, max. torque 1737 lbs- at 1200 rpm 1500 rpm. Exhaust emissions acc. to 97/68/EG stage 3 and EPA/CARB Tier 3. Fuel reservoir: 127 gallons. Transmission ZF 12-speed gear box with automatic control system AS-TRONIC. ZF-intarder fitted directly to the gear. Two-stage transfer case with lockable transfer differential. Axles Welded design, made of high-tensile fine grained steel. All axles steerable. Axles 2, 4 and 5 are planetary axles with differential locks. Suspension All axles are mounted on hydropneumatic suspension Niveaumatik suspension and are lockable hydraulically. Tyres 10 tyres, size: R 25. Steering ZF-servocom power steering, dual circuit system with hydraulic servo system and auxiliary pump system, driven by the axle. At road displacement, axles 3, 4 and 5 electrohy draulically speed-dependent and from 18.6 mph, axles 3 and 4 are fixed to straight displacement. From 37.2 mph, axle 5 is fixed straight. Steering according to EG directive 70/311 EWG. Brakes Service brake: all-wheel servo-air brake, all axles are equipped with disc brakes, dual circuit. Parking brake: Spring brake actuator, acting on the wheels of the 2 nd and 5 th axle. Sustained-action brakes: Engine brake as exhaust retarder with Liebherr additional brake system ZBS. Intarder on gear. Brakes acc. to EG directives 71/320 EWG. Driver s cab Spacious, steel made, corrosion resistant cab, cataphoretic dip-primed, on resilient suspension with hydraulic shock absorbers, sound and heat absorbing internal panelling acc. to EG directive, safety glazing, operating and control instruments, comfortably equipped. Electrical system Modern data bus technique, 24 Volt DC, 2 batteries of 170 Ah each, lighting acc. to traffic regulations. Crane superstructure Frame Crane engine Crane drive Control Hoist gear Luffing gear Slewing gear Crane cab Safety devices Telescopic boom Counterweight Electrical system Swing-away jib Telescopic boom extension Self-manufactured, weight-optimized and torsion resistant welded design of hightensile structural steel; linked by a triple-row roller slewing rim to the carrier for continuous rotation. 4-cylinder Diesel, make Liebherr, type D934S A6, watercooled, output 145 kw (197 h.p.) at 1800 rpm, max. torque 678 lbs- at 1100 rpm 1500 rpm. Exhaust emissions acc. to 97/68/EG stage 3 and EPA/CARB Tier 3. Fuel reservoir: 66 gallons. Diesel hydraulic, with 2 axial piston variable displacement pumps, with servo control and capacity control, 1 double gear pump, open controlled oil circuits. Compact hydraulic drive flanged to the Diesel engine. Drive assembly completely enclosed for noise abatment. Electric Load Sensing control, simultaneous operation of 4 working motions, 2 selfcentering hand control levers (joy stick type). Axial piston fixed displacement motor, Liebherr hoist drum with integrated planetary gear and spring-loaded static brake. 1 differential ram with pilot controlled brake valve. Axial piston fixed displacement motor, planetary gear, spring-loaded static brake. Slewing gear inversible from released to locked as standard feature. All-steel construction, entirely galvanized, powder coated, with safety glazing, operating and control instruments, comfortably equipped, cab tiltable backwards. LICCON safe load indicator, test system, hoist limit switch, safety valves to prevent pipe and hose ruptures. Buckling and torsion resistant design of high-tensile structural steel, oviform boom profile, 1 base section and 5 telescopic sections. All telescopic sections hydraulically extendable independent of one another. Rapid-cycle telescoping system Telematik. Boom length: lbs basic counterweight. Modern data bus technique, 24 Volt DC, 2 batteries of 170 Ah each long, mountable to the telescopic boom at 0, 20 or 40. Hydraulic ram for operating the swing-away jib from 0 40 (option) long lattice section, thus higher pining point for swing-away jib. 2 nd hoist gear For two-hook operation or for operation with swing-away jib if the hoist rope shall remain reeved. 52 LTM
53 53 LTM
54 Crane Rental Service TRUCK CRANES Capacities 82 to 200 tons Booms to 390 feet CRAWLER CRANES Capacities 115 to 440 tons Booms to 512 feet HYDRAULIC CRANES Capacities 8.5 to 625 tons Booms to 480 feet TOWER CRANES Favco 750 & 1000 Kangaroos Link-Belt TG-1900 s Proudly Offering the Largest and Most Diverse Selection of All Terrain and Crawler/Luffer Cranes in New York City Subject to modification Liebherr-Werk Ehingen GmbH Postfach 1361, Ehingen, Germany , Fax E mail: info.lwe@liebherr.com
LIEBHERR LTM Ton HYDRAULIC CRANE
www.baycrane.com LIEBHERR LTM 1250-6.1 300 Ton HYDRAULIC CRANE New York City 11-02 43rd Avenue Long Island City, NY 11101 Tel: 718 392 0800 Fax: 718 349 6681 info@baycrane.com Long Island 389 New South
Liebherr 600 ton Capacity Hydraulic Truck Crane
www.baycrane.com Liebherr 0 ton Capacity Hydraulic Truck Crane New York City 11-02 43rd Avenue Long Island City, NY 11 Tel: 718 392 00 Fax: 718 349 6681 info@baycrane.com Long Island 389 New South Road
LIEBHERR LTM Ton HYDRAULIC CRANE
www.baycrane.com LIEBHERR LTM 1090-4.1 110 Ton HYDRAULIC CRANE New York City 11-02 43rd Avenue Long Island City, NY 11101 Tel: 718 392 0800 Fax: 718 349 6681 info@baycrane.com Long Island 389 New South
Mobile Crane Grue automotrice
Technical Data Caracteristiques techniques Mobile Crane Grue automotrice Telescopic boom Fleche telescopique 157ft www.customservicecrane.com t: 217-897-1700 Randy@customservicecrane.com Lifting capacities
All Terrain crane 90 tons
All Terrain crane tons liebherr ltm /1 BOOM LENGTHS: to JB LENGTHS: to JB OFFSETS: - - NOTES: portland office:.8.1 seattle office: 8 Technical Data Caractéristiques techniques LTM/1 Mobile Crane Grue automotrice
DEMAG MODEL AC TON CAPACITY
LIFTING CHARTS - All Terrain Cranes DEMAG MODEL - 100 TON CAPACITY Working Range Main Boom 1 Liing capacities main boom in 39,700 lb 25' 3'' x 23' 360 85% Main Boom () 0 over rear 35.8 52.8 70.2 70.5 82.0
Crawler Crane LR 1400/2
Crawler Crane LR 0/2 Technical Data LIGHT BOOM SYSTEM 53-20 44th Street Maspeth, Queens, NY 11378 (718) 784-1776 Table of contents Technical Data Technical description Crawler travel gear, Crane superstructure,
LIEBHERR LTM1400 (400 TON)
LEBHERR LTM1400 (400 TON) Lifting capacities at telescopic boom. Ll ry [Q]360' ~125t 42 46 192920 260 400 500 9250 5050 280 240 203 300 340 5752 5146,5 6357 7164 8072 9283 10796 140 163 116 31,7n36,5n
Telescopic boom 184 ft
........-.-.. - -.... 4..... -...... i..................... ------...!... -.. L.../ -v*.-*.. *44-.. -.... A 4---A----,.. -....-. - -. ANTHONY CRANE RENTAL Telescopic Truck Crane LTM 1120/1 Telescopic boom
Key Highlights Contents Specifications Dimensions Main boom Main boom extension Technical description. Demag AC 40-1 MAIN MENUE
Key Highlights Contents Specifications Dimensions extension Technical description Demag AC 40-1 Demag AC 40-1 Most compact 3-axle crane in its category Fast on road and excellent manœuvrability off road
Lifting Capacities Telescopic Boom All Terrain Crane ATC ton (118 metric ton) Link Belt
Lifting Capacities Telescopic Boom All Terrain Crane ATC 3130 130 ton (118 metric ton) Boom and fly capacities for this machine are listed by the following sections: Fully Extended Outriggers Working Range
MODEL CKE2500-II TON CAPACITY
LIFTING CHARTS - Crawler Cranes KOBELCO MODEL - 275 TON CAPACITY Luffing Jib Working Ranges Boom Angle: 88 125 54.9 m 51.8 m 48.8 m 45.7 m 42.7 m 39.6 m 3 m 33.5 m 30.5 m 57.9 m 120 115 110 105 100 95
Mobile Crane/Grue mobile LTM
Mobile Crane/Grue mobile LM 1090-4.2 Preliminary Préliminaire ALL-ROUNDER Ready for anything max ft 110 USt 197 ft 203 ft ft 249 ft Mobile Crane/Grue mobile LM 1090-4.2 197 ft NZK K 31 ft 52 ft m 8.4 ft
Demag AC 650. Key Contents Dimensions Specifications Main boom Main boom extension Fixed fly jib Luffing fly jib Technical description MAIN MENU
Key Contents Dimensions Specifications Main boom Main boom extension Fixed fly jib Luffing fly jib Technical description Demag AC 0 Mobile cranes in perfection Key Counterweight Liing capacities on outriggers
DEMAG AC TONNE ALL TERRAIN HYDRAULIC CRANE WITH SUPERLIFT
200 TONNE ALL TERRAIN HYDRAULIC CRANE WITH SUPERLIFT AC-615 200 TONNES MAX LIFT R 5500 13100 4675 2050 AC-615 200 TONNES MAX LIFT 5950 3600 10050 4145 16890 14195 GENERAL DIMENSIONS WORKING RANGE - MAIN
Demag AC 80-2 ABS AS STANDARD
Demag ABS AS STANDARD Demag Shortest 4-axle machine in its category New electro-hydraulic rear axle steering New tiltable upper cab New DaimlerChrysler engine that meets current emission standards With
Liftcrane Boom Capacities 2250 SERIES 3
Liftcrane Capacities 2250 SERIES 3 No. 44 With Long Reach Top LIFTING CAPACITIES: Lifting capacities for various boom lengths and operating radii are for freely suspended loads and do not exceed 75% of
STEEL CRANE MATS. Absolutely The Best Crane Mats In The World.
STEEL CRANE MATS BY Absolutely The Best Crane Mats In The World. This document is stored and available in the Raptor Tech Technical Document Repository. To help our customers understand certain critical
Crawler Crane LR 1400/2
Crawler Crane LR 0/2 Technical Data 53-20 44th Street Maspeth, Queens, NY 11378 (718) 784-1776 Table of contents Table of contents Technical description Crawler travel gear, Crane superstructure, Boom
Series 1300 Hydraulic Crane 30 Ton Load Ratings
Series 13 Hydraulic Crane Ton Load Ratings! DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
www. terex-cranes.com Demag AC 350 AC 350 Max. load capacity 400 t Sideways Superlift (SSL) for enormous capacity enhancements
AC 350 Demag AC 350 Max. load capacity 400 t Sideways Superli (SSL) for enormous capacity enhancements Unmatched maximum boom lengths of 413.3 through the combination of main boom and luffing fly jib Most
LOAD CHART. MANTIS Model 10010MX. 50 Ton Hydraulic Crawler Crane as originally manufactured and equipped by Tadano Mantis Corporation.
MANTIS Model 10010MX 111.5 ft STANDARD BOOM LOAD CHART MANTIS Model 10010MX 50 Ton Hydraulic Crawler Crane as originally manufactured and equipped by Tadano Mantis Corporation. with Standard 111.5 ft Main
Series 1400A Hydraulic Crane 33 Ton
Series 1A Hydraulic Crane 33 Ton Load Ratings DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
Series 1400 Hydraulic Crane 33 Ton Load Ratings
Series 1 Hydraulic Crane 33 Ton Load Ratings! DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
www. terex-cranes.com AC 80-2 AC 80-2 Shortest 4-axle machine in its category
Shortest 4-axle machine in its category Advanced high-torque DaimlerChrysler engine combined with comfortable 6-speed Allison automatic transmission ensures outstanding driving performance Fully hydraulic
www. terex-cranes.com Demag AC 700 AC 700 Most powerful telescopic crane in the world roadable with full main boom
Demag Most powerful telescopic crane in the world roadable with full main boom Superior boom technology provides exceptional liing capacities Exceptional capacity enhancements due to new Sideways Superli
Series 1300A Hydraulic Crane 30 Ton Load Ratings
Series 13A Hydraulic Crane 3 Ton Load Ratings DANGER AN UNTRAINED OPERATOR SUBJECTS HIMSELF AND OTHERS TO DEATH OR SERIOUS INJURY YOU MUST NOT OPERATE THIS CRANE UNLESS You have been trained in the safe
LOAD CHARTS TMS9000E 85% STABILITY SERIAL NUMBER
LOAD CHARTS TMS9000E 85% STABILITY SERIAL NUMBER TMS9000E - S/N 1 TMS9000E - S/N 2 CONTENTS GENERAL NOTES...11 WEIGHT REDUCTIONS AND WARNING NOTES... 12 COUNTERWEIGHT CONFIGURATIONS... 13-15 LIFTING AREA
MODERN CRANE. AC 40 City All Terrain Crane 45 t Lifting Capacity. AC 40 City ALL TERRAIN CRANE. - (866)
All Terrain Crane 45 t Lifting Capacity ALL TERRAIN CRANE Most compact 3-axle crane in its category Fast on the road and exceptionally maneuverable off road Clearance height is just 9.8 ft HIGHLIGHTS Runner
AC 40 City All Terrain Crane 45 t Lifting Capacity. AC 40 City ALL TERRAIN CRANE
All Terrain Crane 45 t Lifting Capacity ALL TERRAIN CRANE Most compact 3-axle crane in its category Fast on the road and exceptionally maneuverable off road Clearance height is just 9.8 ft HIGHLIGHTS Runner
LIEBHERR LTM 1225-A ANTHONY CRANE RENTAL 300 TON
LEBHERR LTM 1225-A ANTHONY CRANE RENTAL 300 TON Lifting capacities are given in kips (1,000 lbs).... i LTM 1225 ) g!ii!!!d50ft-h)7ft. ~ ~mma m176400,bs e i 50 ft / 67ft i 84 ft 100 ft l17ft 134ft 151 ft
Liftcrane Boom Capacities 999 SERIES 2. Manitowoc Cranes, Inc.
Liftcrane Capacities No. 82 or 22EL LIFTING CAPACITIES: Lifting capacities for various boom lengths and operating radii are for freely suspended loads and do not exceed 75% of a static tipping load. Capacities
Working Range Diagram
LIFTING CHARTS - Hydraulic Truck Cranes LINK-BELT MODEL - 75 TON CAPACITY Working Range Diagram Working Range Diagram 40 20 2 190 180 61 Fly + 115 170 160 10 8.5 61 Fly + 95 36.5 Fly + 115 150 140 36.5
AC 140 ALL TERRAIN CRANE
All Terrain Crane 170 t Lifting Capacity ALL TERRAIN CRANE HIGHLIGHTS 17,650 lb counterweight carried on the crane giving just 26,450 lb axle load 196.9 ft main boom and optional 29.9 ft to 108.3 ft boom
Load Chart Exercise Workbook
Load Chart Exercise Workbook (508) 212-4735 Copy Right 2017 For Exam Use Only BRODERSON IC-80-2D RATED LIFTING CAPACITIES IN POUNDS LOAD RADIUS IN FEET 5 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 ON RUBBER
www. terex-cranes.com AC AC 200-1
Shortest 200-tonner on 5 axles with 41.3 carrier length 7-section 2 boom with Unimec telescoping and pinning system giving unequalled 328.1 combined boom-andjib length with the 8.3 boom extension fitted
MANTIS 200RS LOAD CHART 54'-0 STANDARD BOOM LOAD CHART. MANTIS Model 200RS
LOAD CHART Limitations and General Conditions. This MANTIS CRANE as manufactured by SpanDeck, Inc., meets the requirements of ANSI B30.5 (2000), (When specifically equipped). Structure and stability have
Working Weights. Assembly Diagram. Ctwt ABC+A
14 5487--- 0607--- P3 Assembly Diagram Link--Belt Working Weights Ctwt AB+A Ctwt ABC+A Ctwt ABCDE + A lb (kg) lb (kg) lb (kg) 315,532 (143 125) 340,377 (154 395) 390,069 (176 935) psi 9.8 10.6 12.2 kg/cm2
2. Crane standing on firm, horizontal ground. 6. Working radii are measured from centre of swing and under load.
The operating weight includes the basic machine with crawlers, 2 main winches 26,500 lbs including wire ropes (853 ft and 1624 ft) and 66 ft main boom, consisting of A frame, boom foot (33 ft), boom head
MANTIS 6010 LOAD CHART 80'-0 STANDARD BOOM LOAD CHART. MANTIS Model 6010
LOAD CHART Limitations and General Conditions. This MANTIS CRANE as manufactured by Tadano Mantis Corporation meets the requirements of ASME B30.5. Structure and stability have been tested in accordance
LIEBHERR MODEL LTM 1150/1-165 TON CAPACITY
LIFTING CHARTS - All Terrain Cranes LIEBHERR MODEL - 165 TON CAPACITY I. INFORMATION FOR USING THE LOAD CAPACITY TABLES DANGER: The specifications contained in the operating instructions are of vital importance
Technical data Hydraulic lift crane LR 1160
Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600
View thousands of Crane Specifications on FreeCraneSpecs.com. AC 80-2 All Terrain Crane 100 t Lifting Capacity AC 80-2 ALL TERRAIN CRANE
All Terrain Crane 0 t Liing Capacity Shortest 4-axle machine in its category Advanced high-torque DaimlerChrysler engine combined with comfortable 6-speed Allison automatic transmission ensures outstanding
Technical data Hydraulic lift crane LR 1160
Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600
Mobile Crane LTM Max. capacity: 100 t Max. hoisting height: 84 m Max. radius: 66 m
Mobile Crane LTM 11-5.2 Max. capacity: 1 t Max. hoisting height: 84 m Max. radius: 66 m Dimensions Encombrement 37'9" 45'1" 44'9" 12'7" 1'11" 2'5" 6'7" 2'9" E F A K 8' 1" 6' 7'6" 8'2" 5'4" 5'4" 5'5" 5'1"
Frame. Crane engine. Crane drive. Crane control. Hoist gear. Lufing gear. Slewing gear. Crane cab. Safety devices. Counterweight Telescopic boom
Equipent Crane carrier Frae Outriggers Engine Transission Axles Cardan shaft Suspension Tyre equipent Steering Brakes Driving cab Electrical syste Self-anufactured, torsion-resistant box-type design of
LOAD CHARTS MANTIS 6010LP 30 TON TELE-BOOM CRAWLER CRANE 1 V FT MAIN BOOM, 20 FT EXTENSION & 20 FT JIB
0 FT MAIN BOOM, FT EXTENSION & FT JIB in in in in 1 LIFTING CAPACITIES IN THOUSANDS OF POUNDS; 3, % OF TIPPING, FIRM & LEVEL GROUND MAIN BOOM with TRACKS FULLY EXTENDED 11,0 lb COUNTERWEIGHT ZERO COUNTERWEIGHT
AC ALL TERRAIN CRANE
AC 250-1 All Terrain Crane 300 t Lifting Capacity AC 250-1 ALL TERRAIN CRANE Longest main boom in its category with unequalled 262.5 ft Speed-dependent rear axle steering for increased manoeuvrability
LINK-BELT MODEL HTC TON CAPACITY RANGE DIAGRAM. LIFTING CHARTS - Hydraulic Truck Cranes
LIFTING CHARTS - Hydraulic Truck Cranes LINK-BELT MODEL HTC-840-40 TON CAPACITY RANGE DIAGRAM NOTE: and fly and jib geometry shown are for unloaded condition and machine standing level on firm supporting
RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................
Ground bearing pressure 1.14 kg/cm 2. Main boom (No xx) max. length High reach (1311.xx and 1008.xx) 83 m Luffing jib (No xx) max.
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 14 m main boom, consisting of A frame, boom foot (5.5 m), boom head (8.5 m), 32.3 t basic counterweight, 15 t carbody
INDEX CRANES UNDER 100 TONS PAGE LTM-1095 LIEBHERR LTM-1070 LIEBHERR LTM-1060 LIEBHERR LTM-1055 LIEBHERR GT550E TADANO LTM-1050 LIEBHERR
CRANES INDEX PAGE LTM-1095 LIEBHERR LTM-1070 LIEBHERR LTM-1060 LIEBHERR LTM-1055 LIEBHERR GT550E TADANO LTM-1050 LIEBHERR LTM-1040 LIEBHERR LTM-1030 LIEBHERR ATF-30-2L TADANO TL300E TADANO TR250M TADANO
Technical data Hydraulic lift crane LR 1300 W
Technical data Hydraulic lift crane LR 1300 W Dimensions Basic machine with undercarriage 6390 3000 10570 1475 1760 20 5160 3820 8520 9675 520 4260 1700 1200 00 20 7100 520 00 9 R6 8560 20365 Operating
6. Working radii are measured from centre of swing and under load.
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 20 m main boom, consisting of A frame, boom foot (7 m), boom head (7 m), boom extension (6 m), 60.6 t basic counterweight,
AC ALL TERRAIN CRANE
All Terrain Crane 200 t Lifting Capacity ALL TERRAIN CRANE Due to the newly optimized boom system, the has higher duties compared to its predecessor the AC 160-1 Very compact 5-axle crane with a carrier
Technical data Hydraulic crawler crane HS 875 HD
Technical data Hydraulic crawler crane HS 875 HD Dimensions Basic machine with undercarriage R 5710 2580 8300 3500 2110 1300 1240 4020 1400 5330 2600 1000 530 6480 2240 4900 R 5520 14100 Operating weight
Ground bearing pressure 1.08 kg/cm 2. Main boom (No xx) max. length High reach (No xx and 1309.xx)
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 17 m main boom, consisting of A frame, boom foot (7 m), boom head (10 m), 50.9 t basic counterweight, 20 t carbody
5. For max. wind speed please refer to lift chart in operator s cab or manual.
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn including wire ropes (260 m and 495 m) and 20 m main boom, consisting of A frame, boom foot (10 m), boom head (7 m),
2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with crawlers, 2 main winches 26,500 lbs and 46 ft main boom, consisting of A frame, boom foot (18 ft), boom head (28 ft), 71,200 lbs basic counterweight,
CC USt capacity Crawler Crane Datasheet imperial CC 6800
1375 USt capacity Crawler Crane Datasheet imperial CONTENTS Page: Specifications.................................................................................................. 5 Superli configurations..........................................................................................
LS 278H. 250 ton (227 metric ton) Hydraulic Lattice Boom Crawler Crane. Tube Boom + Jib Capacities
Hydraulic Lattice Boom Crawler Crane LS 278H 250 ton (227 metric ton) Tube Boom + Capacities 60 300 ft. (18.29 91.44 m) Tube Boom with 30 100 ft. (9.14 30.48 m) of 30 ft. (9.14 m) Open Throat Top Section
RT130 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features: Rated capacity: ft working radius. Maximum boom length: 155 ft
ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 130 ton @ 10 ft working radius Maximum boom length: 155 ft Maximum tip height: 164 ft CONTENTS Key............................................................................................
2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 200 kn including wire ropes (90 m) and 11 m main boom, consisting of A frame, pulley block, boom foot (5.5 m) and boom
CC USt capacity Crawler Crane Datasheet imperial CC
CC 251 55 USt capacity Crawler Crane Datasheet imperial CC 251 CONTENTS CC 251 Page: Specifications................................................................................................. 5 Superli
AC 1000 AC USt capacity class All terrain crane Datasheet imperial
1 USt capacity class All terrain crane Datasheet imperial CONTENTS Specifications................................................................................ 4 Page: HA (HA50, HA100) Main boom............................................................................
Liftcrane Boom Capacities Boom No. 58 HL 332,000 lb Crane Counterweight 120,000 lb Carbody Counterweight 360 Degree Rating SERIES 3
ANSI B30.5 Liftcrane Boom Capacities Boom No. 332,000 lb Crane Counterweight 120,000 lb Carbody Counterweight 360 Degree Rating 16000 SERIES 3 LIFTING CAPACITIES: Lifting capacities for various boom lengths
Crawler Crane LR
Crawler Crane LR 1130 EN LR 1002.03 Dimensions Basic machine with undercarriage R 6530 2970 85 6050 3040 1954 1530 3640 1250 6750 7970 3355 1360 1000 6350 440 1345 R 5700 13930 5310 Operating weight The
View thousands of Crane Specifications on FreeCraneSpecs.com. Technical data Hydraulic lift crane LR 1250
Technical data Hydraulic lift crane LR 1250 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 1345 4600 1500 7520 8700 3740 1830 1200 7000 520 R 6200 19200 7600 1200 5800
Hydraulic lift crane LR 1110 LR
Hydraulic lift crane LR 111 EN LR 11.2 Concept and characteristics LR 111 Standard Excellent lifting capacities thanks to optimized distribution of forces New cabin with improved and ergonomic operating
Technical data Hydraulic crawler crane HS 835 HD
Technical data Hydraulic crawler crane HS 835 HD Dimensions Basic machine with undercarriage 2860 7360 3000 1700 1120 3260 990 1200 2360 4710 5650 1220 700 4300 310 R 4050 11250 Operating weight The operating
4600 SERIES 3 RINGER SERIES 2. Manitowoc Cranes, Inc. Manitowoc, Wisconsin U.S.A.
Liftcrane Capacities No. 35 thru 1 Degree Static Machine LIFTING CAPACITIES: Lifting capacities are for a RINGER when operating on a barge. Machine shall be positively secured to prevent shifting. Lifting
S P E C I F I C A T I O N S SPEC. No. CT-2190 DATE-SEP. 2007
S P E C I F I C A T I O N S SPEC. No. DATE-SEP. 2007 SPECIFICATlONS HYDRAULIC CRANE MODEL:UNIC URV554 (FOR INDONESIA) Specifications subject to change without notice. UNIC CRANE PERFORMANCE MODEL : URV554
Lifting Capacities Pounds (30 94 boom)
RT335 LENGTH 30-94 FT. ON OUTRIGGERS FULLY EXTENDED LENGTH 30 FT LENGTH 39 FT LENGTH 50 FT ED ED ED 10 63.0 70,000* 70,000* 69.4 46,600* 46,600* 10 12 58.5 60,800* 60,800* 66.2 46,600* 46,600* 71.7 46,600*
AC ALL TERRAIN CRANE
All Terrain Crane 240 t Lifting Capacity ALL TERRAIN CRANE Shortest 200-tonner on 5 axles with 41.3 ft carrier length 7-section 223 ft boom with Unimec telescoping and pinning system giving unequalled
URW 706. (6.0t x 3m) Mini Crawler Cranes. A 6 tonne capacity at 3m and a hook height of 19.5m, the URW-706 is the highest capacity crane
A 6 tonne capacity at 3m and a hook height of 19.5m, the URW-706 is the highest capacity crane CRANE SPECIFICATIONS Crane capacity capacity: 6.0t x 3.0m Max working radius max: 18.6m Max lifting height
Series I300 Hydraulic Crane
Series 3 Hydraulic Crane 3 Ton Load Ratings AN UNTRANED OPERATOR SUBJECTS HMSELF AND OTHERS TO DEATH OR SEROUS NJURY YOU MUST NOT OPERATE THS CRANE UNLESS You have been trained in the safe operation of
For Sales Use Only! HTC 8650 Series II CRANE RATING MANUAL 4 SECTION POWER BOOM SERIAL NUMBER. not for crane operations
HTC 8650 Series II CRANE RATING MANUAL 4 SECTION POWER BOOM SERIAL NUMBER For Replacement, Order Part Number: L8P0001 (022603) Link Belt is a registered trademark. Page Contents 3 Operating Instructions
Demag CC1800/1
www.barnhartcrane.com Demag CC18/1 33T Demag CC 181 Newly designed hydraulics in conjunction with 26 kw DaimlerChrysler engine providing significant increase in working speeds New crawler travel gear with
CRANE RATING MANUAL HTC
SERIAL NUMBER: CRANE RATING MANUAL 5---Section Boom For Replacement, Order Part Number: N3P0199 (031907) R Link-Belt is a registered trademark. 1of244 N3P0200 Table Of Contents Page Contents 3---4 Operating
RT 100US. 100 USt capacity class Rough terrain crane Datasheet imperial
100 USt capacity class Rough terrain crane Datasheet imperial CONTENTS Page: Key... 3 Highlights... 4 Weights... 5 Dimensions... 6-7 Steering Radii... 8-9 Range Diagram Main Boom... 10 Jib... 14 Load Chart
For sales use only CRANE RATING MANUAL. RTC-8090 Series II 5 - Section Boom. Not for crane operations SERIAL NUMBER: XXXX-XXXX
SERIAL NUMBER: XXXX-XXXX CRANE RATING MANUAL RTC-8090 Series II 5 - Section Boom For Replacement, Order Part Number: N4P0090 (110509) R Link-Belt is a registered trademark. 1of96 N4P0091 Table Of Contents
Load Rating Charts C-Series Cranes 3001
Load Rating Charts C-Series Cranes 3001 7600016-001 July 2003 Capacities: Capacities Overloading this crane or failing to comply with operating conditions and restrictions given on Capacity Chart can
Technical data Hydraulic crawler crane HS 885 HD
Technical data Hydraulic crawler crane HS 885 HD Dimensions Basic machine with undercarriage R 6910 2850 8300 3500 2210 1420 4120 1400 1400 2725 5490 6750 2100 1000 4920 590 R 5520 15200 Operating weight
40' ' POWERED BOOM: MODE 1 40' - 126' POWERED BOOM: MODE 2
Range Diagram and Lifting Capacity Cranes 100 TON LIFTING CAPACITY 40' - 97.3' POWERED BOOM: MODE 1 40' - 126' POWERED BOOM: MODE 2 CRANE WORKING CONDITIONS DIMENSIONS ARE FOR LARGEST FACTORY FUR- NISHED
TRUCK CRANE. 90t capacity class DATASHEET - IMPERIAL PRELIMINARY ROADMASTER 9000
TRUCK CRANE 90t capacity class DATASHEET IMPERIAL ROADMASTER 9000 CONTENTS Page: Dimensions........................................................................................ 4 Specifications......................................................................................
LINK-BELT MODEL 238H5-150 TON CAPACITY
TRANSPORTATION SPECS - Crawler Cranes INK-BET MODE 2385-150 TON CAPACITY COMPONENT EIGTS BS. KGS. Boom 70 (1.78m) x 62 (1.57m) Min 50 to Max 260 Complete Crane c/w 50 boom 287,717 130 508 OD (tubular)
Series 900H Hydraulic Crane 27 Ton Load Ratings
Series 0H Hydraulic Crane 27 Ton Load Ratings DNGER N UNTRINED OPERTOR SUBJECTS HIMSELF ND OTHERS TO DETH OR SERIOUS INJURY YOU MUST NOT OPERTE THIS CRNE UNLESS You have been trained in the safe operation
Mobile Crane LTM Max. capacity: 95 t Max. hoisting height: 82 m Max. radius: 60 m
Mobile Crane LTM 1095-5.1 Max. capacity: 95 t Max. hoisting height: 82 m Max. radius: 60 m Mobile crane LTM 1095-5.1 As taxi crane immediately ready for operation A long telescopic boom, high capacities,
Crawler Crane LR 1200 LR
Crawler Crane LR 1200 EN LR 1004.02 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 4600 1500 7520 8700 3740 1830 1200 7000 520 1345 R 6200 19200 7600 1200 5800 narrow
Technical data Hydraulic lift crane LR 1300 LR 1300
Technical data Hydraulic lift crane LR 1300 LR 1300 Dimensions Basic machine with undercarriage R 9750 3600 10350 6930 3000 LR1300 2250 1600 5000 1465 1700 8500 9650 4260 1870 1200 8000 400 R 6980 Optional:
ALL TERRAIN CRANE AR-5500M
ALL TERRAIN CRANE AR AR-5500M (ESP Boom and Fully Automatic Luffiing Jib) JAPANESE SPECIFICATIONS These specifications are for the optional ESP boom and fully automatic luffing jib for the AR-5500M type
Mobile Crane LTM Max. capacity: 100 t Max. hoisting height: 84 m Max. radius: 66 m
Mobile Crane LTM 1100-5.2 Max. capacity: 100 t Max. hoisting height: 84 m Max. radius: 66 m Mobile crane LTM 1100-5.2 Flexibly and economically usable 2 LTM 1100-5.2 A long telescopic boom, high capacities,
Mobile crane LTM LICCON2. Max. lifting capacity: 220 t Max. lifting height: 101 m Max. working radius: 88 m
Mobile crane LTM 1220-5.2 Max. lifting capacity: 220 t Max. lifting height: 101 m Max. working radius: 88 m LICCON2 Mobile Crane LTM 1220-5.2 Strong and flexible 2 LTM 1220-5.2 A long telescopic boom,
Mobile crane LTM View thousands of Crane Specifications on FreeCraneSpecs.com
Mobile crane LTM 1060-3.1 Max. lifting capacity: 60 t Max. lifting height: 63 m Max. working radius: 48 m Mobile crane LTM 1060-3.1 Strong and flexible 2 LTM 1060-3.1 A long telescopic boom, high capacities,
Crawler Crane LR 1250 LR
Crawler Crane LR 1250 EN LR 1004.02 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 1345 4600 1500 7520 8700 3740 1830 1200 7000 520 R 6200 19200 7600 1200 5800 narrow
LINK-BELT MODEL HTC-8675LB - 75 TON CAPACITY 48 7" (.80m) 41 0" /8" (3.52m) /16" (2.02m) /4" (.34m) 25" 11 0" (.
LIFTING CHARTS - Hydraulic Truck Cranes LINK-BELT MODEL - 75 TON CAPACITY 41 0" (12.50m) 48 7" (14.80m) C L Of Rotation 13 8 1/8" (4.17m) 7 0" (2.13m) 4 5/8" (118mm) 11 6 7/8" (3.52m) 6 7 11/16" (2.02m)
Technical data Hydraulic crawler crane HS 845 HD
Technical data Hydraulic crawler crane HS 845 HD Dimensions Basic machine with undercarriage 2870 8000 3000 1800 1330 3350 1100 1200 5000 5920 2500 1590 700 4500 330 R 4580 11860 Operating weight The operating
Mobile crane LTM Max. lifting capacity: 130 t Max. lifting height: 91 m Max. working radius: 72 m
Mobile crane LTM 1130-5.1 Max. lifting capacity: 130 t Max. lifting height: 91 m Max. working radius: 72 m Mobile Crane LTM 1130-5.1 Flexible and economical to operate 2 LTM 1130-5.1 The Liebherr LTM 1130-5.1
truck crane 140 tons link-belt htc-3140lb BOOM LENGTHS: 42 to 195 ft JIB LENGTHS: 38 to 109 ft JIB OFFSETS:
truck crane 140 tons link-belt htc-3140lb BOOM LENGTHS: 42 to 195 ft JIB LENGTHS: 38 to 109 ft JIB OFFSETS: 2-15 - 30-45 NOTES: Technical Data Specifications & Capacities Telescopic Boom Truck Crane 140
Truck Mounted Telescopic Crane LTF Max. capacity: 60 t Max. lifting height: 56 m Max. radius: 48 m
Truck Mounted Telescopic Crane LTF 1060-4.1 Max. capacity: 60 t Max. lifting height: 56 m Max. radius: 48 m Truck mounted telescopic crane LTF 1060-4.1 Economical and flexible With a long telescopic boom