A&S roller chain. A&S More than just a chain.
|
|
- Roland Lyons
- 6 years ago
- Views:
Transcription
1 A&S roller chain A&S More than just a chain.
2 2 I A&S Roller chain A&S Roller Chain More than just a chain. A&S Roller Chain A&S roller chain has long been recognised for its high quality and affordable reliability. It has earned a strong reputation for its excellent wear resistance, high fatigue resistance and durability and these factors have helped A&S become the most widely used chain brand in Europe. More than just a chain With its reliability and performance, A&S roller chain significantly contributes to reduced downtime and maintenance and has the ability to meet the needs of diverse applications and the continuously increasing demands of industry. To make sure that A&S chain keeps up with these increasing demands, a series of upgrades ensure that the range now offers even more performance benefits. Available in European (BS) and ANSI standard, A&S chain is available with a full range of standard M, K and extended bearing pin attachments and can even be supplied with a particular lubricant based on a customer s specific requirements. The Renold Group A&S roller chain is one of the many chain products from Renold, the leading manufacturer of chain and power transmission products. With a worldwide network of sales companies and distributors, Renold offers global product availability and support for its customers. A&S chain is available in simplex, duplex and triplex. Further multi-strand versions are available on request.
3 A&S Roller chain I 3 New A&S chain includes solid extruded bush and roller components, not the weaker curled bushes offered by some other manufacturers. This combination ensures that there are no concentrated areas of stress within the bearing area which dramatically reduce the working life of the chain by increasing wear. The side plates have been upgraded to have a wider waist, a feature recognised as producing better stress distribution and thus improving the fatigue resistance of the chain. This improves the chain s dynamic load capability. The heat treatment they receive as standard also contributes to their durability.
4 4 I A&S Roller chain European BS Standard DIN 8187, Teil 1/ISO No.4 No. 30 No. 107 No. 11 No. 26 No. 12 Renold ISO Pitch Pitch Inside Roller Plate Inner Outer Pin Pin Con Trans ISO606 Weight No. No. No. No. No. No. Chain No. (inch) (mm) Width Diam Height Plate Plate Diam Length Link Pitch Tensile kg/m No. Min Max Max Thickness Thickness Max Max Extension Strength Min BS simplex chain P P b 1 d 1 g s i s a d 2 l 1 k e (N) Connecting links ,197 5,000 2,500 3,200 4,100 0,600 0,600 1,490 7,400 1, , ,236 6,000 2,800 4,000 5,000 0,600 0,600 1,850 7, , B-1 0,315 8,000 3,000 5,000 7,110 0,760 0,760 2,310 8,600 1, , * 06B-1 0,375 9,525 5,720 6,350 8,200 1,290 1,040 3,280 12, , ** 08B-1 0,500 12,700 7,750 8,510 11,700 1,550 1,550 4,450 16,500 2, , ** 10B-1 0,626 15,875 9,650 10,160 14,600 1,550 1,550 5,080 18,800 2, , ** 12B-1 0,750 19,050 11,680 12,070 16,000 1,810 1,810 5,720 21,900 2, , ** 16B-1 1,000 25,400 17,020 15,880 21,080 4,120 3,100 8,280 34,900 2, , ** 20B-1 1,250 31,750 19,560 19,050 26,420 4,620 3,610 10,190 39,800 2, , ** 24B-1 1,500 38,100 25,400 25,400 33,400 6,100 5,080 14,630 52,600 6, , B-1 1,750 44,450 30,990 27,940 37,080 7,620 6,350 15,900 64,200 6, , B-1 2,000 50,800 30,990 29,210 42,290 7,110 6,350 17,810 63,400 8, , B-1 2,500 63,500 39,300 39,370 52,960 8,130 8,130 22,890 78,200 9, , BS duplex chain P P b 1 d 1 g s i s a d 2 l 2 k e (N) ,236 6,000 2,800 4,000 5,000 0,600 0,600 1,850 7,400-2, , B-2 0,315 8,000 3,000 5,000 7,110 0,760 0,760 2,310 14,300 1,500 5, , * 06B-2 0,375 9,525 5,720 6,350 8,200 1,290 1,040 3,280 23,000-10, , ** 08B-2 0,500 12,700 7,750 8,510 11,700 1,550 1,550 4,450 30,400 2,000 13, , ** 10B-2 0,625 15,875 9,650 10,160 14,600 1,550 1,550 5,080 35,400 2,500 16, , ** 12B-2 0,750 19,050 11,680 12,070 16,000 1,810 1,810 5,720 41,400 2,600 19, , ** 16B-2 1,000 25,400 17,020 15,880 21,080 4,120 3,100 8,280 66,800 2,200 31, , B-2 1,250 31,750 19,560 19,050 26,420 4,620 3,610 10,190 76,700 2,700 36, , B-2 1,500 38,100 25,400 25,400 33,400 6,100 5,080 14, ,300 6,800 48, , B-2 1,750 44,450 30,990 27,940 37,080 7,620 6,350 15, ,700 6,800 59, , B-2 2,000 50,800 30,990 29,210 42,290 7,110 6,350 17, ,000 8,000 58, , B-2 2,500 63,500 39,300 39,370 52,960 8,130 8,130 22, ,500 9,500 72, , BS triplex chain P P b 1 d 1 g s i s a d 2 l 3 k e (N) B ,000 3,000 5,000 7,110 0,760 0,760 2,310 19,900 1,500 5, , * 06B-3 0,375 9,525 5,720 6,350 8,200 1,290 1,040 3,280 33,300-10, , B-3 0,500 12,700 7,750 8,510 11,700 1,550 1,550 4,450 44,300 2,000 13, , B-3 0,625 15,875 9,650 10,160 14,600 1,550 1,550 5,080 52,000 2,500 16, , B-3 0,750 19,050 11,680 12,070 16,000 1,810 1,810 5,720 60,900 2,600 19, , B-3 1,000 25,400 17,020 15,880 21,080 4,120 3,100 8,280 98,600 2,200 31, , B-3 1,250 31,750 19,560 19,050 26,420 4,620 3,610 10, ,200 2,700 36, , B-3 1,500 38,100 25,400 25,400 33,400 6,100 5,080 14, ,700 6,800 48, , B-3 1,750 44,450 30,990 27,940 37,080 7,620 6,350 15, ,300 6,800 59, , B-3 2,000 50,800 30,990 29,210 42,290 7,110 6,350 17, ,500 8,000 58, , B-3 2,500 63,500 39,300 39,370 52,960 8,130 8,130 22, ,800 9,500 72, , * Only with straight side plates ** Straight side plates available
5 A&S Roller chain I 5 ANSI Standard DIN 8188, Teil 1/ISO No.4 No. 30 No. 107 No. 11 No. 26 No. 12 Renold ISO Pitch Pitch Inside Roller. Plate Inner Outer Pin Pin Con Trans ISO606 Weight No. No. No. No. No. No. Chain No. (inch) (mm) Width Diam Height Plate Plate Dia Length Link Pitch Tensile kg/m No. Max Max Max Thickness Thickness Max Max Extension Strength Min ANSI standard simplex P P b 1 d 1 g s i s a d 2 l 1 k e (N) Connecting links ,250 6,350 3,100 3,300 5,900 0,760 0,760 2,300 7, , ,375 9,525 4,680 5,080 8,600 1,290 1,290 3,590 12,000 1, , ,500 12,700 7,850 7,920 11,200 1,550 1,550 3,970 16,400 2, , ,625 15,875 9,400 10,160 14,600 2,040 2,040 5,080 20,400 2, , HV 0,625 15,875 9,400 10,160 14,600 2,450 2,450 5,080 22,000 2, , ,750 19,050 12,570 11,910 17,500 2,450 2,450 5,940 25,300 2, , H 0,750 19,050 12,570 11,910 17,500 3,220 3,220 5,940 28,600 2, , HV 0,750 19,050 12,570 11,910 17,500 3,220 3,220 5,940 28,600 2, , ,000 25,400 15,750 15,880 24,130 3,250 3,250 7,940 32,700 3, , ,250 31,750 18,900 19,050 30,170 4,060 4,060 9,540 39,700 4, , ,500 38,100 25,230 22,230 36,200 4,800 4,800 11,110 49,300 5, , ,750 44,450 25,230 25,400 42,230 5,610 5,610 12,710 52,900 5, , ,000 50,800 31,550 28,580 48,260 6,350 6,350 14,290 63,100 6, , ,500 63,500 37,850 39,670 60,330 8,130 8,130 19,850 76,900 9, ,300 - ANSI standard duplex P P b 1 d 1 g s i s a d 2 l 2 k e (N) ,250 6,350 3,100 3,300 5,900 0,760 0,760 2,300 14,200-6, , ,375 9,525 4,680 5,080 8,600 1,290 1,290 3,590 22,200 1,700 10, , ,500 12,700 7,850 7,920 11,200 1,550 1,550 3,970 30,800 2,100 14, , ,625 15,875 9,400 10,160 14,600 2,040 2,040 5,080 38,400 2,700 18, , ,750 19,050 12,570 11,910 17,500 2,450 2,450 5,940 48,100 2,600 22, , H-2 0,750 19,050 12,570 11,910 17,500 3,220 3,220 5,940 54,700 2,600 26, , ,000 25,400 15,750 15,880 24,130 3,250 3,250 7,940 61,900 3,000 29, , ,250 31,750 18,900 19,050 30,170 4,060 4,060 9,540 75,400 4,200 35, , ,500 38,100 25,230 22,230 36,200 4,800 4,800 11,110 94,700 5,300 45, , ,750 44,450 25,230 25,400 42,230 5,610 5,610 12, ,800 5,200 48, , ,000 50,800 31,550 28,580 48,260 6,350 6,350 14, ,600 6,500 58, ,600 - ANSI standard triplex P P b 1 d 1 g s i s a d 2 l 3 k e (N) ,250 6,350 3,100 3,300 5,900 0,760 0,760 2,300 20,800-6, , ,375 9,525 4,680 5,080 8,600 1,290 1,290 3,590 32,200 1,700 10, , ,500 12,700 7,850 7,920 11,200 1,550 1,550 3,970 45,100 2,100 14, , ,625 15,875 9,400 10,160 14,600 2,040 2,040 5,080 56,500 2,700 18, , ,750 19,050 12,570 11,910 17,500 2,450 2,450 5,940 70,900 2,600 22, , H-3 0,750 19,050 12,570 11,910 17,500 3,220 3,220 5,940 80,800 2,600 26, , ,000 25,400 15,750 15,880 24,130 3,250 3,250 7,940 91,200 3,000 29, , ,250 31,750 18,900 19,050 30,170 4,060 4,060 9, ,200 4,200 35, , ,500 38,100 25,230 22,230 36,200 4,800 4,800 11, ,200 5,300 45, , ,750 44,450 25,230 25,400 42,230 5,610 5,610 12, ,700 5,200 48, , ,000 50,800 31,550 28,580 48,260 6,350 6,350 14, ,200 6,500 58, ,000 - Bush diameter Straight side plates available Renold Chain products that are dimensionally in line with the ISO standard far exceed the stated ISO minimum tensile strength requirements. However Renold does not consider breaking load to be a key indicator of performance because it ignores the principal factors of wear and fatigue. In these areas, Renold products are designed to produce the best possible results and independent testing proves this. In this catalogue, where the ISO breaking load is quoted, it should be noted that we are stating that the A&S chain conforms to the ISO minimum standard. Independent test results show that the minimum (many companies quote averages) breaking loads are far in excess of the ISO minimum. For some chain types the product has no relevant ISO standard. In this case, the breaking loads quoted are the minimum guaranteed.
6 6 I A&S Roller chain Roller chain with attachments M1/M2 Roller chain with M1 attachments DIN Inner- Outer- ISO Plate Plate l h h M d s i s a g/ ,800 10,000 6,800 2,300 0,570 0,570 2,500 WN* 05B ,800 11,900 8,600 2,300 0,730 0,730 3,400 WN 06B ,000 14,500 10,100 3,300 1,250 1,000 4,000 WN 08B ,000 20,800 13,000 4,300 1,500 1,500 5,800 DIN 08B ,000 20,800 13,700 4,300 1,500 1,500 5,800 WN 10B ,000 24,900 16,500 5,300 1,500 1,500 7,300 DIN 12B ,000 28,200 21,000 6,600 1,760 1,760 8,100 DIN 12B ,000 28,200 18,500 6,400 1,760 1,760 8,100 WN 16B ,000 39,700 23,000 6,600 3,700 3,000 10,300 DIN 16B ,000 40,000 27,400 8,400 3,700 3,000 10,000 WN 20B ,000 47,500 30,500 8,400 4,400 3,500 12,500 DIN 20B ,000 47,500 33,000 10,400 4,400 4,100 12,500 WN 24B ,000 61,500 42,700 10,500 5,400 5,000 16,700 WN 08A ,500 17,500 12,700 3,300 1,500 1,500 5,500 DIN 10A ,700 24,600 15,900 5,300 2,000 2,000 7,200 DIN 12A ,900 26,000 18,300 5,300 2,400 2,400 8,600 DIN 16A ,000 39,700 24,600 6,600 3,000 3,000 10,300 DIN For base chain measurements, please see pages 4 and 5. *WN = Works standard, please note measurement differences. Roller chain with M2 attachments DIN Inner- Outer- ISO Plate Plate h h M d s i s a g/2 l g l 1 l g l ,000 6,800 2,300 0,570 0,570 2,500 11,100 6,000 WN* 05B ,900 8,600 2,300 0,730 0,730 3,400 14,800 8,000 WN 06B ,500 10,100 3,300 1,250 1,000 4,000 17,600 9,500 WN 08B ,800 13,000 4,300 1,500 1,500 5,800 24,400 12,700 DIN 08B ,800 13,700 4,300 1,500 1,500 5,800 24,400 12,700 WN 10B ,900 16,500 5,300 1,500 1,500 7,300 29,900 15,900 DIN 12B ,200 21,000 6,600 1,760 1,760 8,100 35,400 19,000 DIN 12B ,200 18,500 6,400 1,760 1,760 8,100 35,400 19,000 WN 16B ,700 23,000 6,600 3,700 3,000 10,300 46,200 25,400 DIN 16B ,000 27,400 8,400 3,700 3,000 10,000 45,400 25,400 WN 20B ,500 30,500 8,400 4,400 3,500 12,500 57,000 31,700 DIN 20B ,500 33,000 10,400 4,400 4,100 12,500 57,000 31,700 WN 24B ,500 42,700 10,500 5,400 5,000 16,700 71,500 38,100 WN P P s a 08A ,500 12,700 3,300 1,500 1,500 5,500 24,000 12,700 DIN 10A ,600 15,900 5,300 2,000 2,000 7,200 29,900 15,800 DIN 12A ,700 18,300 5,300 2,400 2,400 8,600 35,600 19,000 DIN 16A ,700 24,600 6,600 3,000 3,000 10,300 46,200 25,400 DIN d h M h For base chain measurements, please see pages 4 and 5. *WN = Works standard, please note measurement differences.
7 A&S Roller chain I 7 Roller chain with attachments K1/K2 Roller chain with K1 attachments DIN Inner- Outer- Guiding- ISO Plate Plate Dim. l h K d s i s a g/2 f Z ,800 4,500 2,300 0,570 0,570 2,500 11,200 17,600 WN* 05B ,800 5,300 2,300 0,730 0,730 3,400 13,500 21,500 WN 06B ,000 6,700 3,300 1,250 1,000 4,000 19,600 28,500 WN 08B ,000 8,900 4,300 1,500 1,500 5,800 25,400 41,700 DIN 08B ,000 8,500 4,300 1,500 1,500 5,800 27,600 41,900 WN 10B ,000 10,300 5,300 1,500 1,500 7,300 31,800 49,600 DIN 12B ,000 13,500 6,600 1,760 1,760 8,100 38,100 52,700 DIN 12B ,000 12,200 6,400 1,760 1,760 8,100 35,200 54,600 WN 16B ,000 15,900 6,600 3,700 3,000 10,300 50,800 85,600 DIN 16B ,000 17,000 8,400 3,700 3,000 10,000 58,000 83,800 WN 20B ,000 19,900 8,400 4,400 3,500 12,500 63, ,000 DIN 20B ,000 21,000 10,400 4,400 4,100 12,500 69,000 98,700 WN 24B ,000 28,000 10,500 5,400 5,000 16,700 88, ,700 WN 08A ,500 7,900 3,300 1,500 1,500 5,500 25,400 35,800 DIN 10A ,700 10,300 5,300 2,000 2,000 7,200 31,800 49,800 DIN 12A ,900 11,900 5,300 2,400 2,400 8,600 38,100 58,000 DIN 16A ,000 15,900 6,600 3,000 3,000 10,300 50,800 82,600 DIN For base chain measurements, please see pages 4 and 5. *WN = Works standard, please note measurement differences. Roller chain with K2 attachments DIN Inner- Outer- Guiding- ISO Plate Plate Dim. h K d s i s a g/2 l g l 1 f Z ,500 2,300 0,570 0,570 2,500 11,100 6,000 11,200 17,600 WN* 05B ,300 2,300 0,730 0,730 3,400 14,800 8,000 13,500 21,500 WN 06B ,700 3,300 1,250 1,000 4,000 17,600 9,500 19,600 28,500 WN 08B ,900 4,300 1,500 1,500 5,800 24,400 12,700 25,400 41,700 DIN 08B ,500 4,300 1,500 1,500 5,800 24,400 12,700 27,600 41,900 WN 10B ,300 5,300 1,500 1,500 7,300 29,900 15,900 31,800 49,600 DIN 12B ,500 6,600 1,760 1,760 8,100 35,400 19,000 38,100 52,700 DIN 12B ,200 6,400 1,760 1,760 8,100 35,400 19,000 35,200 54,600 WN 16B ,900 6,600 3,700 3,000 10,300 46,200 25,400 50,800 85,600 DIN 16B ,000 8,400 3,700 3,000 10,000 45,400 25,400 58,000 83,800 WN 20B ,900 8,400 4,400 3,500 12,500 57,000 31,700 63, ,000 DIN 20B ,000 10,400 4,400 4,100 12,500 57,000 31,700 69,000 98,700 WN 24B ,000 10,500 5,400 5,000 16,700 71,500 38,100 88, ,700 WN 08A ,900 3,300 1,500 1,500 5,500 24,000 12,700 25,400 35,800 DIN 10A ,300 5,300 2,000 2,000 7,200 29,900 15,800 31,800 49,800 DIN 12A ,900 5,300 2,400 2,400 8,600 35,600 19,000 38,100 58,000 DIN 16A ,900 6,600 3,000 3,000 10,300 46,200 25,400 50,800 82,600 DIN For base chain measurements, please see pages 4 and 5. *WN = Works standard, please note measurement differences.
8 A&S Roller chain I 8 Roller chain with extended pins DIN ISO Pin d 2 l 2 u 2 v 2 d 2 l 3 u 3 v ,850 12,500 6,300 3, ,850 18,000 11,800 6,200-05B ,310 13,600 6,400 3, ,310 19,100 11,900 6,300-06B ,280 23,000 11,300 6, ,280 33,300 21,600 11,200-08B ,450 30,400 14,800 7, ,450 44,300 28,700 14,800-10B ,080 35,400 17,600 9, ,080 52,000 34,200 17,600-12B ,720 41,400 20,700 10, ,720 60,900 40,200 20,700-16B ,280 66,800 33,300 17, ,280 98,700 65,200 33,300-20B ,190 77,900 38,300 20, , ,400 74,800 38,300-24B , ,000 50,400 26, , ,400 98,800 50,400 - P P v 2 v u 2 2 l 2 08A ,960 30,800 15,200 8, ,960 45,100 29,500 15, ,960 25,100 9, ANSI 10A ,080 38,400 19,000 10, ,080 56,500 37,100 19, ,080 31,200 11, ANSI 12A ,940 48,100 24,000 12, ,940 70,900 46,800 24, ,940 38,400 14, ANSI 16A ,920 61,300 30,800 16, ,920 90,600 60,100 30, ,920 49,600 19, ANSI P d 2 P For base chain measurements, please see pages 4 and 5. v 3 l 3 u 3 v 3
9 9 I A&S Roller chain A&S Roller chain Solid extruded bush Solid extruded roller Simplex Wider waisted plates Hardened and shot-peened plates Comprehensive European (BS) and ANSI standard ranges Wide range of attachments available Duplex Choice of lubricant to meet customer s requirements A&S - more than just a chain Triplex
10 Your nearest stockist is: For other country distributors please contact Renold UK. Whilst all reasonable care in compiling the information contained in this brochure is taken, no responsibility is accepted for printing errors. All information contained in this brochure is subject to change after the date of publication. Renold Power Transmission Ref: REN20a / ENG /
A&S roller chain. A&S More than just a chain.
A&S roller chain A&S More than just a chain. www.renold.com 2 I A&S Roller chain A&S Roller Chain More than just a chain. A&S Roller Chain A&S roller chain has long been recognised for its high quality
More informationRenold Roller Chain products are available from
Renold Roller Chain products are available from MARYLAND METRICS RENOLD Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142
More informationStrong. Powerful. Even Better Performance.
Strong. Powerful. Even Better Performance. www.renoldjeffrey.com 2 I Renold Synergy Chain Renold Synergy Simply the best Synergy was created to meet a specific requirement of our customers: Improved chain
More informationStandard Attachments. Section I Renold Transmission Chain Catalogue
38 I Renold Transmission Chain Catalogue Standard Attachments Clockwise from top K2 attachment, M1 attachment, extended bearing pin & K1 attachment Renold Transmission Chain Catalogue I 39 Standard Attachments
More informationOilfield Chain 7F
Oilfield Chain 7F-0008 www.renoldjeffrey.com 2 I Renold Oilfield Chain Renold Oilfield Chain Unique quality and safety Consistent reliability Renold's 100+ years of experience in the design and manufacture
More informationChain Drives. Chain Drives
08 Chain Drives Chain Drives 166 Renold Roller Chains Synergy BS Roller Chain - Duplex Synergy BS Roller Chain - Simplex Renold No. ISO No. Pitch inch A Pitch mm A Inside Width B Roller diam C 116038
More informationRoller chain catalogue
Roller chain catalogue www.renold.com Table of Contents Section - BS and ANSI products and dimensions Precision roller chain / chain types... 5 Chain branding... 6 Renold Synergy brand... 7 European (BS)
More informationMaximum performance. Maximum value. There is no equal.
imum performance. imum value. There is no equal. 2 I Renold Synergy Chain Renold Synergy Simply the best Renold set out to create the finest roller chain available today and succeeded. Synergy is the only
More informationConveyor chain catalogue
Conveyor chain catalogue www.renold.com Table of Contents Section - Conveyor Products and Dimensions Conveyor chain introduction....................................................................5-7 BS
More informationANSI RS Roller Chain
U.S. TSUBAKI RS ROLLER CHAIN IMPROVED ANSI RS Roller Chain RS ROLLER CHAIN RS11 RS240 Superior Impact Resistance U.S. Tsubaki chain has increased tensile strength and approximately 20% greater impact resistance
More informationTransmission. Chain catalogue.
Transmission Chain catalogue www.renold.com 2 I Renold Transmission Chain Catalogue Renold Chain Product Range Roller Chain British, ANSI, API, DIN, ISO and Works Standard Chains Adapted Chains Extended
More informationProducts Catalogue. Quality Guaranteed
Products Catalogue CHAINS The GB range of Chains, Sprockets, Couplings and Pulleys has evolved from 20 years expertise in the importation and sale of the products locally in the Australia. The GB range
More informationRoller chains European type. Approved Performance from Rexnord. The right chain!
Approved Performance from Rexnord Roller chains European type Fulfils ISO quality requirements Inner plate Hardened and tempered Roller Seamless Outer plate Hardened and tempered Pin Case-hardened Bush
More informationMore Powerful ANSI Chains
There s Nothing Standard about Tsubaki Performance More Powerful ANSI Chains Improve reliability Reduce downtime Decrease equipment costs Tsubaki: The choice for chain Tsubaki ANSI Chains Your link to
More informationRoller chains H-Series American type. High Performance from Rexnord. The right chain!
High Performance from Rexnord Roller chains H-Series American type Highly robust & durable through reinforced plates H-Series - American type High Performance from Rexnord. Inner Reinforced, fatigue resistant
More informationArnold & Stolzenberg GmbH
product range Arnold & Stolzenberg GmbH A m e m b e r o f t h e R E N O L D - G r o u p roller chains Arnold & Stolzenberg GmbH A member of the RENOLD-Group Postbox 16 35 and 16 45 37574 Einbeck-Juliusmühle
More informationRoller chains American type. Approved Performance from Rexnord. The right chain!
Approved Performance from Rexnord Roller chains American type Fulfils ISO quality requirements Inner plate Hardened and tempered Roller Seamless Outer plate Hardened and tempered Pin Case-hardened Bush
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More informationU.S. TSUBAKI DRIVE CHAINS
DRIVE CHAINS Contents Page ASME/ANSI RS ROLLER CHAIN A- ~ A-24 INTRODUCTION A- ~ A-5 RS25 THROUGH RS24 A-6 ~ A-9 HEAVY SERIES A-2 RS DOUBLE PITCH ROLLER CHAINS A-2 SELECTION AND ENGINEERING INFORMATION
More informationTaper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B
T e l + 4 4 ( 0 ) 1 2 1 3 6 0 0 1 5 5 F a x + 4 4 ( 0 ) 1 2 1 3 2 5 1 0 7 9 E m a i l s a l e s @ c r o s s m o r s e. c o m Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B Simplex
More informationThe right chain! Extreme Performance from Rexnord. Leaf chains RexAthletic. MODULE_08/GB/2014/08 // No liability accepted for misprints or errors!
Extreme Performance from Rexnord Leaf chains RexAthletic RexAthletic Extreme Performance from Rexnord. Good corrosion protection, maximum operating reliability Intermediate plate Pin hardened and tempered,
More informationOilfield Chain 7F
Oilfield Chain 7F-0008 www.renold.com 2 I Renold Oilfield Chain Renold Oilfield Chain Unique quality and safety Leading edge technology Renold provides practical cost effective solutions, with a commitment
More informationRoller chains European type Stainless. Approved Performance from Rexnord. The right chain!
Approved Performance from Rexnord Roller chains European type roller chains - European type Approved Performance from Rexnord. Fulfils ISO quality requirements Inner plate Roller Outer plate Pin Bush APPLICATIONS
More informationThe right chain! High Performance from Rexnord. Roller chains Factory standard. MODULE_04/GB/2014/03 // No liability accepted for misprints or errors!
High Performance from Rexnord Roller chains Factory standard High Performance from Rexnord. The right chain! Factory standard Roller chains Tailored solutions for specific meets customer needs Inner link
More informationUniversal Leaf Chain PAGE 1. Maxtop Leaf Chain 2. HKK Leaf Chain 3. Wippermann Leaf Chain 4-7. Rating Chart & Leaf Chain Selection 8
Universal Leaf Chain PAGE 1 Maxtop Leaf Chain 2 HKK Leaf Chain 3 Wippermann Leaf Chain 4-7 Rating Chart & Leaf Chain Selection 8 Stock Identification 9 UNIVERSAL Leaf Chain 1 For a number of years I-TRANS
More informationU.S. TSUBAKI DRIVE CHAINS
DRIVE CHAINS Contents Page ANSI RS ROLLER CHAIN A- ~ A-4 INTRODUCTION A- ~ A-5 RS5 THROUGH RS4 A-6 ~ A-9 HEAVY SERIES A- RS DOUBLE PITCH ROLLER CHAINS A- SELECTION AND ENGINEERING INFORMATION A- ~ A-4
More informationSimplex roller chains - European design... 9 according to standards čsn , din 8187 and Iso 606
AND BUSH CHAINS Simlex roller chains - Euroean design... 9 according to standards čsn 02 3311, din 8187 and Iso 606 Dulex roller chains - Euroean design... 10 according to standards čsn 02 3311, din 8187
More informationP.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
More informationThe right chain! Approved Performance from Rexnord. Double pitch roller chains. MODULE_05/GB/2014/08 // No liability accepted for misprints or errors!
Approved Performance from Rexnord Double pitch roller chains Double pitch roller chains Fulfils ISO quality requirements Inner plate Hardened and tempered Roller Seamless Outer plate Hardened and tempered
More informationROLLER LUBRICANT VISCOSITY RATING
CHAIN INFORMATION OUTER PLATE OUTER PLATE PIN 2 PIECES OF EACH MAKE AN OUTER LINK BUSH INNER PLATE INNER PLATE 2 PIECES OF EACH MAKE AN INNER LINK ROLLER AMERICAN BRITISH Lubrication (Dependent on power
More informationTRANSMISSION CHAINS CONVEYOR CHAINS. Our Alpha & Delta ranges p 3. Transport of wood blocks p 4. Conveyor of wood blocks p 4. Transport of logs p 5
CONTENTS Our Alpha & Delta ranges p 3 TRANSMISSION CHAINS Transport of wood blocks p 4 Conveyor of wood blocks p 4 Transport of logs p 5 Transport of wood planks p 6 CONVEYOR CHAINS Solid pin chains -
More informationAdapted Transmission Chain
Adapted Transmission Chain ( ATC ) www.renold.com.au Chain Product Range Transmission Chain British, ANSI, API, DIN, ISO and Works Standard Chains Adapted Chains Extended Pitch Chains Hollow Bearing Pin
More informationSelf adjusting chain tensioner
Self adjusting chain tensioner Superior Chain Technology www.renold.com 2 I Roll-Ring Leading edge technology Renold provides practical cost effective solutions, with a commitment of value through quality.
More informationKey factors for superior performance
Since 1917, Tsubakimoto Chain has maintained a line-up of cutting edge chain products with exceptional quality and performance that help end-users meet their power transmission and conveying requirements.
More informationThe HKK Solid Advantage
The HKK Solid Advantage HKK Chain, with its cold-forged, solid bushings, solid rollers, and specially treated pins and bushings provides a unique advantage over conventional chains. HKK s cold forging
More informationInstruction and Installation Manual
Instruction and Installation Manual ROSTA Tensioner Devices Tensioners Accessories -G -W -R Sprocket wheel N Chain rider P Oil resistant Up to + 120 C Reinforced Sprocket wheel set Chain rider set -I -F
More informationTRANSMISSIONS. Mechanical Power Transmission
TRANSMISSIONS Mechanical Power Transmission Dunlop BTL Ltd European Distribution Centre MPT House Brunswick Road Cobbs Wood Industrial Estate Ashford, Kent. UK TN23 1EL Contact us +44 (0)1233 663340 +44
More informationEngineering Data Tensioner Arms idler Sprocket Sets Idler Roller Pulley Sets
CHAIN & PULLEY TENSIONERS Engineering Data Tensioner Arms idler Sprocket Sets Idler Roller Pulley Sets ENGINEERING DATA TENSIONING TECHNOLOGY Chain & V-Belt Tensioning Roller chains are power transmission
More informationDIAMOND ROLLER CHAIN. For Agricultural and Construction Equipment
DIAMOND ROLLER CHAIN For Agricultural and Construction Equipment FABRICATION While roller chain would appear to be a simple product, the number of components in a ten foot section of 40 pitch chain totals
More informationAsphalt Industry Chain
Asphalt Industry Chain Laying down the standards Superior Chain Technology www.renold.com 2 I Renold Asphalt Chain Renold Asphalt Chain Unique quality and safety Leading edge technology Renold provides
More informationProducts & Services Enclosed & Open Gearing
Products & Services Enclosed & Open Gearing Enclosed Gear Units Renold a respected, trusted global brand. Renold Gears is expert in the design and manufacture of worm gears for all industrial applications.
More informationSPLIT CYLINDRICAL ROLLER BEARINGS
SPLIT CYLINDRICAL ROLLER BEARINGS PERFORMANCE SOLUTIONS RANGE OF HOUSINGS Engineered to perform Standard support with complete housing and bearing Flange support Take up tension unit complete with housing
More informationStandard Metric Roller Chain (DIN 8180/8187 and BS 228)
Standard Metric Roller (DIN 10/17 and BS 22) Single Roller Size ISO itch p Between Inner lates b 1 2. 2.0.00. 2. 4. 6. 6. 9. 11.6 19.56 0.99.99. 4 Roller d 1. 4.00 5.00 6..51 7.77.16.07 15. 0 27.94 29.21
More informationLinks. Kg/ft (W) Of 1. Unit CC ,850 3, Links. Of 1. Unit. Chain
s Stainless Steel Milk Crate Finer Power Transmissions stocks a range of economy Stainless Steel chain in British Standard, American Standard and Double. This economy range of Stainless Steel chain offers
More informationTSUBAKI HEAVY DUTY CHAINS THE ULTIMATE IN STRENGTH
TSUBAKI HEAVY DUTY CHAINS THE ULTIMATE IN STRENGTH G8 SERIES DRIVE CHAIN MADE IN JAPAN Located in Kansai Science City, the Kyotanabe plant embodies our wide spectrum of cutting-edge technological solutions.
More informationConveyor chains American type. Approved Performance from Rexnord. The right chain!
Approved Performance from Rexnord Conveyor chains American type Conveyor chains - American type Approved Performance from Rexnord. Fulfils ANSI quality requirements Inner link Carbon steel Roller Carbon
More informationBAJAJ STEEL INDUSTRIES LIMITED
TM BAJAJ STEEL INDUSTRIES LIMITED An ISO 9001-2008, 14001: 2004 & & OHSAS 18001:2007 certified company SINCE 1832 BAJAJ POWER TRANSMISSION PRODUCTS www.bajajngp.com BAJAJ Group Nagpur Bajaj Steel Industries
More informationMassey Ferguson Fitment Guide May 2002
Massey Ferguson Fitment Guide May 2002 Feeder Chains Clean & Return Chains Chains Only Sprockets Replacement parts Copyright Collier and Miller Pty Ltd. ABN 97 000 521 344 The information contained within
More informationPRODUCT INFORMATION FENNER V-BELTS AND WEDGE BELTS
PRODUCT INFORMATION FENNER V-BELTS AND WEDGE BELTS Not all belts are the same. Fenner belts are made to exacting specifications and have set the standard in technical development in the toughest applications
More informationPower Transmission Product Range
Power Transmission Product Range The Power Transmission Spectrum Cross+Morse manufacture and supply a complete line of drives to meet the challenge of modern industry, where ever increasing powers, and
More informationChains 2013_FPT BOOK.indb 5 17/02/13 6:54 PM
s Contents Australia s Only Agricultural...08 Detachable chain... 08 Agri-Power-...09 Simplex roller chain... 09 Heavy duty series chain... 09 ANSI Standard...10 ANSI Heavy Duty...11 BS...12 Breaker and
More informationProducts & Services Enclosed & Open Gearing
Products & Services Enclosed & Open Gearing Worm Gear Units Renold a respected, trusted global brand. Renold Gears is expert in the design and manufacture of worm gears for all industrial applications.
More informationPRECISION ROLLER CHAIN AGRICULTURAL, STEEL PINTLE STEEL DETACHABLE CHAIN, T-BAR AND T-ROD WELDED STEEL CHAIN AND ATTACHMENTS...
TABLE OF CONTENTS PRECISION ROLLER CHAIN...1-34 AGRICULTURAL, STEEL PINTLE STEEL DETACHABLE CHAIN, T-BAR AND T-ROD...35-56 WELDED STEEL CHAIN AND ATTACHMENTS...57-61 STEEL BUSHED CHAIN AND ATTACHMENTS...62-67
More informationAPI Series Oil Field Chains from Hitachi
AI Series Oil Field s AI Series Oil Field s from itachi itachi AI series Oil Field s are designed and built to provide maximum performance and reliability for oil field service. These exceptional chains
More informationTroubleshooter Guide.
Troubleshooter Guide www.renold.com 2 I Renold Troubleshooter Product range Roller Chain British, ANSI, API, DIN, ISO and Works Standard Chains Adapted Chains Extended Pitch Chains Hollow Pin Chains Made
More informationA SPHERICAL REVOLUTION
A SPHERICAL REVOLUTION CREATING A SMOOTHER OPERATION FOR YOU Timken is pioneering a spherical revolution with a full bearing portfolio, global manufacturing consistency, local availability and a better
More informationThe right chain! High Performance from Rexnord. Rotary chains. MODULE_04/GB/2014/03 // No liability accepted for misprints or errors!
High Performance from Rexnord Rotary chains Highly robust and durable Rotary chains High Performance from Rexnord. Link cranked shape Roller Shock-resistant, seam-free Bush High surface hardness, hard
More informationSAPPHIRE ROLLER CHAIN. Performance that s priced right US CHAIN ( ) diamondchain.com
SAPPHIE OLLE HAIN Performance that s priced right. 1-317-638-6431 1-800 US HAIN (872-4246) diamondchain.com TABLE OF ONTENTS THE NEW STANDAD 3 STANDAD/HEAVY SEIES HAIN Standard Series hain 4 Heavy Series
More informationASME/ANSI Series Chain 4. Heavy Series Chain 5. Non-Standard Series Chain 5. ISO/British Standard Series Chain 6. Specialty Application Chain 6-8
Diamond Oil Sapphire Field PRoduct Product Guide Table of Contents ASME/ANSI Series Chain 4 Heavy Series Chain 5 Non-Standard Series Chain 5 ISO/British Standard Series Chain 6 Specialty Application Chain
More informationMetric Chain Attachments
Page 1 Attachment Assemble to order Metric.pdf Date 0/0/1 Metric Attachments A1 WA-1 K1 WK-1 R1 A1, K1 and R1 Connector Links and Inner Links p b 2 g F B m D L I F H s 2.2.. 7.1.2,000.. 1.. 0. 1.2 4 4
More informationLifting Chain. Product Catalogue.
Lifting Chain Product Catalogue www.renold.com 2 I Renold Lifting Chain Catalogue Renold Chain Product Range Roller Chain British, ANSI, API, DIN, ISO and Works Standard Chains Adapted Chains Extended
More informationTapered Roller Bearings. Reliable energy efficient suitable for high loads
Tapered Roller Bearings Reliable energy efficient suitable for high loads Tapered roller bearings a premium product from FAG Tapered roller bearings are characterized by high radial and axial load carrying
More informationROSTA Tensioner Devices
33 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending on quality, to elongation as
More informationConveyor Chain.
Conveyor Chain www.renold.com 2 I Renold Conveyor Chain Catalogue Renold Chain Product Range Roller Chain British, ANSI, API, DIN, ISO and Works Standard Chains Adapted Chains Extended Pitch Chains Hollow
More informationProduct Range Modules ROSTA Tensioner Devices
Product Range Modules ROSTA Page 17 14 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending
More informationDRIVE CHAINS ENGINEERED STEEL DRIVE CHAINS DRIVE CHAINS
ENGINEERED STEEL Designed to give you superior performance, even under the most punishing conditions Rugged, all-steel Rex and Link-Belt drive chains are built to perform at levels other drive chains can
More informationTownsend Bearings. Rosta Tensioner Devices. Revision 1
Townsend Bearings Rosta Revision 1 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending
More informationChain and Sprockets. for the Steel Mill Industry. ISO 9001 Registered Quality System Dixon, IL Plants Only.
ISO 9001 Registered Quality System Dixon, IL Plants Only Chain and Sprockets for the Steel Mill Industry Most Models Available in Carbon, Alloy and Stainless Steel www.alliedlocke.com ALLIEDLOCKE Metal
More informationThe specialist for the replacement of heavy duty public escalator and moving walkway chains
ESCALATORS The specialist for the replacement of heavy duty public escalator and moving walkway chains 35, rue des Bas-Trévois BP 104-10003 Troyes Cedex - France Tél : +33 (0)3 25 76 29 50 - Fax : +33
More information.S CAT-HYSCKT
.S CAT-HYSCKT-2016-1 CONTENTS HYTORC SOCKETS HYTORC SOCKET OVERVIEW... 5 NEW HYTORC SOCKET COATING... 7 ½ DRIVE SOCKETS... 8 12PT ½ DRIVE SOCKETS... 11 ¾ DRIVE SOCKETS... 12 12PT ¾ DRIVE SOCKETS... 17
More informationLeaf chains BL Series American type. Approved Performance from Rexnord. The right chain!
Approved Performance from Rexnord Leaf chains BL Series American type Light and medium lifting applications Leaf chains - RexDL Approved Performance from Rexnord. Intermediate link plate High fatigue strength
More informationDieMax XL TM Maximum Life Springs
TRUSTED SOLUTIONS AND INNOVATION DieMax XL TM Maximum Life Springs Meets ISO Standards DieMax XL TM Maximum Life Springs Strategically located to serve you better IEM, a division of Connell Limited Partnership,
More informationDRILLING & MOBILE EQUIPMENT
DRILLING & MOBILE EQUIPMENT CHAINANDDRIVES.COM.AU Introduction INTRODUCTION Chain & Drives was established to become a leader in Power Transmission. One of our core sectors is the Drill Rig Industry. We
More informationTapered Roller Bearings in X-life Design
Tapered Roller Bearings in X-life Design Contents Design and safety guidelines Page Features X-life... 2 Operating temperature... 4 Cages... 4 Suffixes... 4 Compensation of angular misalignments... 4
More information17590 phoneix brochure 6/8/03 12:21 PM Page 1 MANUFACTURER OF PRECISION BALL/ROLLER & SPECIAL BEARINGS BSI
17590 phoneix brochure 6/8/03 12:21 PM Page 1 MANUFACTURER OF PRECISION BALL/ROLLER & SPECIAL BEARINGS BSI REGISTERED BS EN ISO 9001 : 2000 17590 phoneix brochure 6/8/03 12:21 PM Page 2 BEARINGS Based
More informationCHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationConveyor Chain ENGLISH ISSUE 8
Conveyor Chain ENLIS ISSUE 8 www.challengept.com Never a problem, always a... CALLENE RODUCT RANE RECISION ROLLER CAIN, IN STEEL, STAINLESS STEEL & ZINC/NICKEL LATED LEAF CAIN EAVY DUTY DRIVE CAIN WELDED
More informationRenoldflex.
Renoldflex www.renold.com Renoldflex Type A Renoldflex Type B 2 1 2 2 1 5 1 2 Fig. 1 Fig. 2 1 Disc pack 4 3 4 3 2 Hub 3 Precision bushings 4 High tensile steel screws 5 Spacer Renoldflex torsionally rigid
More informationMK09 COMPACT MOTORS T E C H N I C A L C A T A L O G
MK09 COMPACT MOTORS T E C H N I C A L C A T A L O G Motor Inertia 0.3 kg.m² Theoretical torque Max.power Max. speed Max. pressure at 100 bar at 1000 PSI cm³/tr [cu.in/rev.] Nm [lb.ft] kw [HP] tr/min[rpm]
More informationGREAT KNOWHOW CONVEYOR CHAIN SUITING MANY APPLICATIONS HIGH QUALITY
GREAT KNOWHOW FB Ketjutekniikka is the largest manufacturer of conveyor chains in Scandinavia. With over 50 years of experience and specialisation in conveyor chains FB Ketjutekniikka has developed into
More informationTaper Bore Sprockets. Sprockets. 06B 3/8" x 7/32" BS Taper Bore Sprockets. c r 3. SPROCKET mm CHAIN mm Tooth Radius r 3
Sprokets Taper Bore Sprokets BS Taper Bore Sprokets 06B 3/8" x 7/32" SPROCKET mm CHIN mm Tooth Radius 10.0 Pith 9.525 Chamfer 1.0 Width Between Inner Plates 5.720 Tooth Width b1 5.2 Roller Diameter 6.350
More informationDie Springs SERVICING INDUSTRY SINCE 1918
Die Springs SERVICING INDUSTRY SINCE 1918 Die Springs The Industry Standard, Conformed to Your Needs LEMPCO customization services will go to virtually any length to satisfy your needs. Now, the full range
More informationchain sprocket SIMPLEX DUPLEX TRIPLEX
chain sprocket SIMPLEX DUPLEX TRIPLEX CHAIN SPROCKET DRIVE The Transmission of mechanical power without slippage and with a high degree of maintained efficiency is a basic function of the Roller Chain
More informationRACK JACK. Synchronous Lifting Systems
RACK JACK Synchronous Lifting Systems RACK JACK (ROUND RACK TYPE) Operation The Rack Jack from WMH Herion provides simple synchronous lifting motion. The system of rack and pinion transforms linear motion
More informationhigh performance pin oven chain
high performance pin oven chain introduction Brooks are the world s leading authority on the manufacture and supply of high performance pin oven chains to the Beverage Can Industry. Complimenting the chains
More informationWARATAH HARVESTER AND FORWARDER CRANES
WARATAH HARVESTER AND FORWARDER CRANES Maximum productivity. Minimal downtime. You need equipment that can take on the big jobs and that s durable enough to keep going day after day. Whatever it takes,
More informationLift Truck Replacement Chain
Leaf Chain CONCERNED ABOUT SAFETY CHOOSE Lift Truck Replacement Chain For over 50 years, Morse has been manufacturing quality domestic leaf chain for lift trucks and the material handling industry. Since
More informationDieMax XL TM Maximum Life Springs
www.danly.com DieMax XL TM Maximum Life Springs Meets ISO Standards www.danly.com DieMax XL TM Maximum Life Springs SERVICE WE DELIVER AND QUALITY YOU CAN DEPEND ON DANLY IEM is a leading manufacturer
More informationSimplex, duplex and triplex chains Special chains CHAINS
Simlex, dulex and trilex chains Secial chains CHAINS INDEX CHAINS Pag. s comonents 101 s Transmission roller chains -British Standard DIN 8187 ISO/R 102 Transmission roller chains - American Standard ISO/R
More informationBELT DRIVES BELT DRIVES. the mark of engineering excellence
BELT DRIVES BELT DRIVES TS PULLEYS CHAINS SPROCKETS SHAFT FIXINGS COUPLINGS GEARED DRIVES BELTS PULLEYS CHAINS SPROCKETS SHAFT FIXINGS COUPLINGS the mark of engineering excellence the mark of engineering
More informationSTEELS WITH HIGH MECHANICAL STRENGTH REINFORCED RIVETING. REINFORCED RESISTANCE to shocks et to misalignment
STANDARD CHAINS - SOLID INS ISO STANDARD CHAINS - 1977 RANGE OF CONVEYOR CHAINS STEELS WITH HIGH MECHANICAL STRENGTH improved material RESISTANCE & HARDNESS Increased BREAKING LOADS (see table on next
More informationINDUSTRIAL PIPE SUPPORTS CATALOGUE
INDUSTRIAL PIPE SUPPORTS CATALOGUE DATE PUBLISHED: 1/06/2017 BINDER GROUP INDUSTRIAL PIPE SUPPORT CATALOGUE TABLE OF CONTENTS 1. INTRODUCTION... 4 2. QUALITY MANAGEMENT CERTIFICATE... 5 3. PIPE SUPPORT
More informationROLLER CHAIN SPROCKETS INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN SPROCKETS PRODUCT PAGE INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3 SECTION I STANDARD SPROCKETS...E-4 E-112 Shear Pin Sprockets, Bolt-On...E-4 E-6 Type D Sprockets, Detachable
More informationHoist Chains. Hebezeugketten
Hoist Chains Hebezeugketten Hebezeugketten Fine Tolerance Hoist Chains acc. to EN 818-7 THIELE Hoist Chains according to EN818-7 (fulfil also DSKN 726300) are manufactured on modern digital controlled
More informationMade to run. Delta V-belts. The new standard in standard V-belts
Made to run Delta V-belts The new standard in standard V-belts 2 Looking for a V-belt fit for your specific needs? Every chance we will have it! You know Gates as the global engineering leader in Power
More informationdana. Engineered for Precision. Why Dana Aftermarket Parts?
1 Engineered for Precision. Backed by dana. Parts You Trust for the Vehicles You Rely On. Your business depends on keeping your vehicles on the road, with minimal downtime and fewer maintenance intervals.
More informationEUROPEAN PRECISION AND QUALITY POWER CHUCKS 3-JAW LARGE, EXTRA LARGE THRU HOLE & CLOSED CENTER
EUROPEAN PRECISION AND QUALITY POWER CHUCKS 3-JAW LARGE, EXTRA LARGE THRU HOLE & CLOSED CENTER TMX Power s Featuring the quality and precision associated with European manufacturing, TMX Power s are direct,
More informationAVK VALVES FOR UNCONVENTIONAL GAS PROJECTS AVK FLOW CONTROL WE GUARANTEE SAFETY STANDARDS ARE MET SO CAN YOU
AVK VALVES FOR UNCONVENTIONAL GAS PROJECTS AVK FLOW CONTROL WE GUARANTEE SAFETY STANDARDS ARE MET SO CAN YOU AVK ONE OF THE WORLD S LEADING VALVE MANUFACTURERS The AVK Group, with its more than 100 companies
More informationTRANSMISSIONS. Mechanical Power Transmission
TRANSMISSIONS Mechanical Power Transmission Dunlop BTL Ltd European Distribution Centre MPT House Brunswick Road Cobbs Wood Industrial Estate Ashford, Kent. UK TN23 1EL Contact us +44 (0)1233 663340 +44
More information14 HH EAC/CTP CE RoHS-II conform
Outer jacket: Pressure extruded PUR mixture Inner jacket: Pressure extruded, gusset filling PUR mixture 12 cores or more: Bundles with optimized pitch length and pitch direction Conductor: Fine-wire strand
More information