Taper Bore Sprockets. Sprockets. 06B 3/8" x 7/32" BS Taper Bore Sprockets. c r 3. SPROCKET mm CHAIN mm Tooth Radius r 3
|
|
- Gerald Mason
- 6 years ago
- Views:
Transcription
1 Sprokets Taper Bore Sprokets BS Taper Bore Sprokets 06B 3/8" x 7/32" SPROCKET mm CHIN mm Tooth Radius 10.0 Pith Chamfer 1.0 Width Between Inner Plates Tooth Width b1 5.2 Roller Diameter Tooth Width B1 5.3 Tooth Width B Tooth Width B Type 1 (C45) Type 2 (GG22) Type 3 (C45) Type 4 (GG22) Type 9 (C45) Type 7 (C45) Outer Pith Hub Length Taper Type Hub Length Taper Type Hub Length Taper Type de dp Bore Bore Bore ll dimensions in millimetres unless otherwise stated. Every effort has been taken to ensure that the data listed in this atalogue is orret. Challenge aepts no liability for any inauraies or damage aused 40
2 Sprokets Taper Bore Sprokets BS Taper Bore Sprokets 08B 1/2" x 5/16" SPROCKET mm CHIN mm Tooth Radius 13.0 Pith Chamfer 1.3 Width Between Inner Plates Tooth Width b1 7.0 Roller Diameter Tooth Width B1 7.2 Tooth Width B Tooth Width B Type 1 (C45) Type 2 (GG22) Type 3 (C45) Type 4 (GG22) Type 9 (C45) Outer Pith Hub Length Taper Type Hub Length Taper Type Hub Length Taper Type de dp Bore Bore Bore Every effort has been taken to ensure that the data listed in this atalogue is orret. Challenge aepts no liability for any inauraies or damage aused ll dimensions in millimetres unless otherwise stated. 41
3 Sprokets Taper Bore Sprokets BS Taper Bore Sprokets 10B 5/8" x 3/8" SPROCKET mm CHIN mm Tooth Radius 16.0 Pith Chamfer 1.6 Width Between Inner Plates Tooth Width b1 9.0 Roller Diameter Tooth Width B1 9.1 Tooth Width B Tooth Width B Type 1 (C45) Type 2 (GG22) Type 3 (C45) Type 6 (C45) Type 9 (C45) Type 7 (C45) Outer Pith Hub Length Taper Type Hub Length Taper Type Hub Length Taper Type de dp Bore Bore Bore ll dimensions in millimetres unless otherwise stated. Every effort has been taken to ensure that the data listed in this atalogue is orret. Challenge aepts no liability for any inauraies or damage aused 42
4 Sprokets Taper Bore Sprokets BS Taper Bore Sprokets 12B 3/4" x 7/16" SPROCKET mm CHIN mm Tooth Radius 19.0 Pith Chamfer 2.0 Width Between Inner Plates Tooth Width b Roller Diameter Tooth Width B Tooth Width B Tooth Width B Type 1 (C45) Type 2 (GG22) Type 5 (C45) Type 3 (C45) Type 4 (GG22) Type 9 (C45) Type 7 (C45) Type 8 (GG22) Outer Pith Hub Length Taper Type Hub Length Taper Type Hub Length Taper Type de dp Bore Bore Bore Every effort has been taken to ensure that the data listed in this atalogue is orret. Challenge aepts no liability for any inauraies or damage aused ll dimensions in millimetres unless otherwise stated. 43
5 Sprokets Taper Bore Sprokets BS Taper Bore Sprokets 16B 1" x 17.02mm SPROCKET mm CHIN mm Tooth Radius 26.0 Pith Chamfer 2.5 Width Between Inner Plates Tooth Width b HolIer Diameter Tooth Width B Tooth Width B Tooth Width B Type 1 (C45) Type 2 (GG22) Type 5 (C45) Type 3 (C45) Type 4 (GG22) Type 9 (C45) Type 7 (C45) Type 8 (GG22) Outer Pith Hub Length Taper Type Hub Length Taper Type Hub Length Taper Type de dp Bore Bore Bore ll dimensions in millimetres unless otherwise stated. Every effort has been taken to ensure that the data listed in this atalogue is orret. Challenge aepts no liability for any inauraies or damage aused 44
6 Sprokets Taper Bore Sprokets BS Taper Bore Sprokets 20B 1.1/4" x 3/4" SPROCKET mm CHIN mm Tooth Radius 32.0 Pith Chamfer 3.5 Width Between Inner Plates Tooth Width b RolIer Diameter Tooth Width B Tooth Width B Tooth Width B Type 1 (C45) Type 2 (GG22) Simplex Outer Pith Hub Length Taper Type Teeth Dia Dia Ref Dia thro Bush de dp Bore Every effort has been taken to ensure that the data listed in this atalogue is orret. Challenge aepts no liability for any inauraies or damage aused ll dimensions in millimetres unless otherwise stated. 45
Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B
T e l + 4 4 ( 0 ) 1 2 1 3 6 0 0 1 5 5 F a x + 4 4 ( 0 ) 1 2 1 3 2 5 1 0 7 9 E m a i l s a l e s @ c r o s s m o r s e. c o m Taper Bore Sprockets for 3 /8 Pitch British Standard Chains Type 06B Simplex
More informationAgricultural Chain ISO 487/DIN 8189 and Works Standard
ISO 487/DIN 8189 and Works Standard 1 ISO 487 Connecting Links ISO STD Extra Pitch Pitch Inside Over Roller Pin Bush Over Plate Minimum Weight No No No No No No Strength Inch mm Width Inner Dia Dia Dia
More informationChain Drives. Sprockets. Belts. Pulleys
Chapter 10 119 Roller Chains Roller Chain Attachments Double Pitch Chains Leaf Chains Timber Chains Agricultural Chain Attachments Conveyor Chains Conveyor Chain Attachments Chain Drives Taper Bore Sprockets
More informationEC / EB Series Electro Clutches and Brakes
EC / EB Series Electro Clutches and Brakes Shaft Mounted Clutches and Brakes Shaft Mounted Clutches EC Series All the features of an electric clutch in a convenient, preassembled package. Mounts on any
More informationSPROCKETS AND PLATEWHEELS DESIGNED FOR ROLLER CHAINS
AND DEIGNED FOR ROLLER The range of sprockets and wheels designed for chains manufactured by our Company provides an all-round solution to the needs of industry in the sector of flexible mechanical transmissions
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationCHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationIndex SECTION L PLASTICS
Index SECTION L PLASTICS PRODUCT PAGE SECTION I NON-METALLIC SPROCKETS.... L-2 L-30 SPROCKETS - STOCK NO. 25 ¼" PITCH...L-5 NO. 35 3 8" PITCH...L-6 NO. 40 ½" PITCH...L-7 NO. 50 5 8" PITCH...L-8 NO. 60
More informationRenold Roller Chain products are available from
Renold Roller Chain products are available from MARYLAND METRICS RENOLD Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142
More informationLinks. Kg/ft (W) Of 1. Unit CC ,850 3, Links. Of 1. Unit. Chain
s Stainless Steel Milk Crate Finer Power Transmissions stocks a range of economy Stainless Steel chain in British Standard, American Standard and Double. This economy range of Stainless Steel chain offers
More informationMain Frame (1,676 MM (5-1/2 FT.) Hay Pickup)
Main Frame (,676 MM (5-/2 FT.) Hay Pickup) 2 E34250 STRIPPER 2-3000 AUGER E66297 ANGLE 2 300- AUGER, (SUB FOR E34496) (SUB E9572) E9572 ANGLE 2 AUGER E6905 TUBE 59400-86 Pickup Heads Strippers (,676 MM
More informationEB Series Electro Brake
Shaft Mounted Brakes for Power-On pplications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
More informationSuper-Shield Parts List & Pricing. Date: 06/01/12
Super-Shield Parts List & Pricing Date: 06/01/12 To Order Call: 519-227-4323 PAGE 2 Friction Super-Shield Flat Style Friction Super-Shield Friction Drive G 60 Flat Style Track. Complete with Torsion Mount
More informationChains 2013_FPT BOOK.indb 5 17/02/13 6:54 PM
s Contents Australia s Only Agricultural...08 Detachable chain... 08 Agri-Power-...09 Simplex roller chain... 09 Heavy duty series chain... 09 ANSI Standard...10 ANSI Heavy Duty...11 BS...12 Breaker and
More information3. FRAME 1. SAFETY 2. PREPARATION 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT
TABLE OF CONTENTS 1. SAFETY 2. PREPARATION 3. FRAME 4. TRANSMISSION 5. DRIVE 6. ROW UNIT 7. OPTIONAL EQUIPMENT FRAME 7" x 7" Stacker Bar STACKER BAR The Stacker Bar includes a heavy 3/8 wall tubing, 14
More informationA&S roller chain. A&S More than just a chain.
A&S roller chain A&S More than just a chain. www.renold.com 2 I A&S Roller chain A&S Roller Chain More than just a chain. A&S Roller Chain A&S roller chain has long been recognised for its high quality
More informationHIGH PRECISION CONVEYOR CHAINS AND SPROCKETS
HIGH PRECISION CONVEYOR CHAINS AND SPROCKETS Dro forged DIN 8165 FV DIN 8167 M SMS 1698 Transmission chains scanchain.net About ScanChain About ScanChain Most roviders of industrial chains in the Nordic
More informationROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable Hubs Split
More informationThe right chain! High Performance from Rexnord. Rotary chains. MODULE_04/GB/2014/03 // No liability accepted for misprints or errors!
High Performance from Rexnord Rotary chains Highly robust and durable Rotary chains High Performance from Rexnord. Link cranked shape Roller Shock-resistant, seam-free Bush High surface hardness, hard
More informationX-RAKES X & HDX RAKES
X-RAKES X & HDX RAKES X-RAKES X-RAKE FEATURES The H&S X-Series Rakes feature a highly maneuverable short turning radius, no caster wheel design, and an overhead frame design for high volume capacity of
More informationChain and Sprockets. for the Steel Mill Industry. ISO 9001 Registered Quality System Dixon, IL Plants Only.
ISO 9001 Registered Quality System Dixon, IL Plants Only Chain and Sprockets for the Steel Mill Industry Most Models Available in Carbon, Alloy and Stainless Steel www.alliedlocke.com ALLIEDLOCKE Metal
More informationSTEELS WITH HIGH MECHANICAL STRENGTH REINFORCED RIVETING. REINFORCED RESISTANCE to shocks et to misalignment
STANDARD CHAINS - SOLID INS ISO STANDARD CHAINS - 1977 RANGE OF CONVEYOR CHAINS STEELS WITH HIGH MECHANICAL STRENGTH improved material RESISTANCE & HARDNESS Increased BREAKING LOADS (see table on next
More informationSIT Variable speed pulleys VAR
SIT Variable speed pulleys VAR Description - VAR Pulleys The variable speed pulley is a well established drive; designed to give continuous speed variation at a comparative low cost. Unfortunately it is
More informationFront Hub and Disc (4WD Model)
4C 8 DRIVE SHAFT SYSTEM Disassembled View Front Hub and Disc (4WD Model) 411RW001 Legend (1) Bolt (2) Cap (3) Snap Ring and Shim (4) Hub Flange (5) Lock Washer and Lock Screw (6) Hub Nut (7) Outer Bearing
More informationProducts Catalogue. Quality Guaranteed
Products Catalogue CHAINS The GB range of Chains, Sprockets, Couplings and Pulleys has evolved from 20 years expertise in the importation and sale of the products locally in the Australia. The GB range
More informationPARTS PARTS SECTION FRAME GROUP... 2 WHEEL GROUP... 4 ROTOR GROUP... 6 CABLE DRUM... 8 TUNNEL (BAG BOOM OPTION) CONVEYOR GROUP...
AG-BAGGER PART S MANUAL MODELS G-6000 A,B,C,D 2320 SE AG-BAG LANE WARRENTON, OR. 97146 INT L (503) 861-1644 US 1-800-334-7432 FAX (503) 861-2527 PARTS FRAME GROUP... 2 WHEEL GROUP... 4 ROTOR GROUP... 6
More informationROSTA Tensioner Devices
33 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending on quality, to elongation as
More informationENGINEERING CHAIN DIVISION
Style A ram hains Y G Style D Y G ram hain Specifications hain Width Pins ushings Rollers Sidebars hain ead nd Inside Weight Number Style Overall to L to L Width Dia. Matl. Dia. Matl. Dia. Matl. hick.
More informationSection X STEERING DATA AND SPECIFICATIONS. 21 degrees 45 minutes -f- or 1 degree (inner wheel when outer wheel is 20 degrees)
76 Section X DATA AND SPECIFICATIONS MODELS MC-1 MG-2 MC-3 MY-1 Steering Type Manual Power Worm and Three Tooth Roller None None None Rack and Gear Sector, Recirculating Ball Nut Ratio Manual 20.4... Power
More informationNew Standard Power Transmission
ew Standard ower ransmission lame ut Sprockets S has series of engineered conveying sprockets and matching conveying chains of different varieties. We manufacture engineered sprockets with and without
More informationRigid Couplings. P-1686-TBW 2/17... TB Wood s F7-1
Rigid Couplings F7 F7-1 AVS Series Couplings AVS Series (Adjustable Vertical Spacer) Coupling used for vertical turbine pumps No flexible element Integral nut used for infinite adjustment of pump turbine
More informationROLLER CHAIN SPROCKETS INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN SPROCKETS PRODUCT PAGE INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3 SECTION I STANDARD SPROCKETS...E-4 E-112 Shear Pin Sprockets, Bolt-On...E-4 E-6 Type D Sprockets, Detachable
More informationTRANSMISSION CHAINS CONVEYOR CHAINS. Our Alpha & Delta ranges p 3. Transport of wood blocks p 4. Conveyor of wood blocks p 4. Transport of logs p 5
CONTENTS Our Alpha & Delta ranges p 3 TRANSMISSION CHAINS Transport of wood blocks p 4 Conveyor of wood blocks p 4 Transport of logs p 5 Transport of wood planks p 6 CONVEYOR CHAINS Solid pin chains -
More informationCombine Pickup Heads
Combine Pickup Heads 164 Model Section 3 Model Years 1991 1996... 2-5 Pickup Head Layout 1994 1996... 6-7 Model Years 1997 1999 (1 PUH Bearings)... 8-10 4 Tube Pickup Head Layout 1997 1999... 11-12 Model
More information15.Timing Belt Assembly
15.Timing Belt Assembly A: REMOVAL 1. TIMING BELT 1) Remove the V-belt. 2) Remove the crankshaft pulley. 3)
More informationSeries R/W ratio, minimum*** L-curves X X X X. Work load in curve [N]
Series 2351 2451 2551 2651 Name Standard Heavy Duty HD Small Radius SM HD-SM R/W ratio, minimum*** 1.6 1.6 1.0 1.0 S-curves X L-curves X X X X Work load in curve [N] 2500 3500 2500 3500 Load example 6x1.5
More informationCombine Pickup Heads
Combine Pickup Heads 124 Model Section 1 Model Years 1991 1996... 2-5 Pickup Head Layout 1994 1996... 6-7 Model Years 1997 1999 (1 PUH Bearings)... 8-10 4 Tube Pickup Head Layout 1997 1999... 11-12 Model
More informationConveyor chain catalogue
Conveyor chain catalogue www.renold.com Table of Contents Section - Conveyor Products and Dimensions Conveyor chain introduction....................................................................5-7 BS
More informationGRAIN DECK BELT CONVEYOR PARTS LIST SERIAL NOS
GRAIN DECK BELT CONVEYOR PARTS LIST SERIAL NOS. 112000-115499 1 DISCHARGE ASSEMBLY - GRAIN BELT DRIVE OVER CONVEYOR SERIAL NOS. 112000-115499 2 REF # PART NO. DESCRIPTION QTY 1 C200760 Discharge Weldment
More informationStandard Attachments. Section I Renold Transmission Chain Catalogue
38 I Renold Transmission Chain Catalogue Standard Attachments Clockwise from top K2 attachment, M1 attachment, extended bearing pin & K1 attachment Renold Transmission Chain Catalogue I 39 Standard Attachments
More informationPARTS CATALOG MODELS 310, 410, 610, 910 GRAIN CART. Unverferth
Unverferth Manufacturing Company, Inc. P.O. Box 357 Kalida, Ohio 45853 (419) 532-3121 FAX (419) 532-2468 Grain Carts PARTS CATALOG 290901 MODELS 310, 410, 610, 910 GRAIN CART REVISED 10-12-00 Unverferth
More information220º Ball Nosed Lollipop Cutter
220º Ball Nosed Lollipop Series 722 Ultra-High Performance Solid Carbide -TiALN 30º Right Hand Helix - Micro-grain K30 4-Flute 220º Ball Nosed Tolerances: +0.00/-0.051mm h6 FL Neck Reach Dia- Dia- Dia
More informationCOMPANY PROFILE. ...dedication to constant skills improvement, keeping up to date with the latest technical developments and passion for innovation...
COMPANY PROFILE Welcome to our Bluebelt profile page, and thank you for taking the time to read about us. Our company was founded in 1999 by Christopher Dale, and over the past 12 years has become a leading
More informationCAMBRI-LINK PROVEN RESULTS APPLICATIONS ALL CAMBRI-LINK BELTS PROVIDE INDUSTRY-LEADING BENEFITS: BAKING COOLING
DURABLE, EFFICIENT BELTING FOR SPIRAL CAGE AND STRAIGHT-LINE APPLICATIONS POSITIVE DRIVE FULLY COLLAPSIBLE LARGE OPEN AREAS * Rugged flat wire style belt Efficient and economical For straight-line and spiral
More informationOMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Yes Yes Yes Yes Yes Yes Standard Yes Yes Yes Yes Yes Yes P.t.o. Yes Yes
More informationITR ELEVATING SCRAPER PARTS
ITR ELEVATING SCRAPER PARTS Make Caterpillar Series & Model 613 / 613B Remarks 1 Chain 9J0115 2 2 Flight Bolt 0S1603 128 2A Flight Nut 6B6684 128 2B Flight Washer 5P8245 128 3 Sprocket 9J1653 2 4 Sprocket
More informationchain sprocket SIMPLEX DUPLEX TRIPLEX
chain sprocket SIMPLEX DUPLEX TRIPLEX CHAIN SPROCKET DRIVE The Transmission of mechanical power without slippage and with a high degree of maintained efficiency is a basic function of the Roller Chain
More informationTHE MOST ADAPTABLE BELT FOR SPIRAL CAGE SYSTEMS UP TO 300 LBS. CAM-GRID EXTRA UP TO 250 LBS. CAM-GRID
CAM-GRID THE MOST ADAPTABLE BELT FOR SPIRAL CAGE SYSTEMS SUPERIOR STRENGTH STRAIGHT & SPIRAL APPLICATIONS EASY TO CLEAN Cam-Grid belts are our most application-adaptable product for spiral systems. MAX.
More informationAssortment 2013_FPT BOOK.indb /02/13 6:57 PM
Assortment Contents Why compete against your supplier when you can be our partner Chain Tensioners...14 see Chains section for details Anti-Vibration Mounts...224 Key Steel...225 Motor Rails...226 Self
More informationLEGO Element Survey 45560
1 Bushing, ½-module, yellow 4239601 4 Bushing, 1-module, gray 4211622 170x Connector peg with friction, 2-module, 4121715 Connector peg, 1½-module, beige 6013938 Axle with positioning stop, 4-module, beige
More informationRoller chains TPM - QRC pag. 40 Roller chains RCX pag. 43 Conveyor chains CRT pag. 45 Chain guide rails in polyethylene pag. 48
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More information250P Manure Spreader
0P Manure Spreader Illustrated Parts Breakdown Page - Page Page Page Page Page Page Page Page Page Page Page Page Page Page - Page Page Page 0 Complete Front End PTO/Jack/Hitch Assembly Front Pulley Assembly
More informationFOR MORE INFORMATION CALL CLARK ROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable s Split and
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 uni QN all page - Datasheet: uni QN EN Plastic
More informationOMT Technical Information Shaft Version
A: Cylindrical 40 shaft C: Parallel key A12 8 70 DIN 6885 Keyway deviates from standard B: Cylindrical 1.5 in shaft D: Parallel key 3 /8 3 /8 2 1 /4 in B.S. 46 Keyway deviates from standard 45 C. Involute
More information< INTRODUCE BONDED SEALS >
< INTRODUCE BONDED SEALS > ORIGINAL TYPE: The bonded seal was originally designed to replace copper type washers in higher pressure systems. Simple in construction the gasket comprises a metal annulus,
More information2006 MINI Cooper ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) Engine - Technical Data - Cooper (W10) & Cooper S (W11)
ENGINE, GENERAL 11 00 ENGINE IN GENERAL 2002-08 ENGINE Engine - Technical Data - Cooper (W10) & Cooper S (W11) ENGINE IN GENERAL Cylinder 4 Bore mm 77 (3.03) Stroke mm 85.8 (3.377) Effective displacement
More informationS.C. Rulmenti S.A. Barlad Romania Republicii Street No
RAIAL BEARINGS (EXCEPTING TAPERE ROLLER BEARINGS) Tolerance class P eviations in µm Table 1 mp V mp K ia,,9,1 2,3, all normal moifie over up to high low max. max. max. max. max. high low low max.. 1) 2.
More informationRexnord 1757 TAB TableTop Chain
1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width
More informationTT4101 Rotary Tedder
TT Rotary Tedder 0//0 Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page Page Tongue Assembly S/N S/N - Tongue Assembly S/N + Main Frame S/N - Main Frame S/N to Main Frame S/N
More informationChapter 11. Keys, Couplings and Seals. Keys. Parallel Keys
Chapter 11 Keys, Couplings and Seals Material taken for Keys A key is a machinery component that provides a torque transmitting link between two power-transmitting elements. The most common types of keys
More informationTransmission Overhaul Procedures-Bench Service
How to Assemble the Lower Reverse Idler Gear Assembly Special Instructions In 1996 Eaton changed the reverse idler system design. In the nut design, the reverse idler bearing was lubricated through a hole
More informationTorque Limiter and TL Coupling FAQ
Torque Limiter and TL Coupling FAQ We answer your important questions! Tsubaki Emerson Co. Q1. Do TEM friction facings contain any asbestos? Q2. What materials are friction facings made of? Q3. How is
More informationTwin Wall Ducting. System s. Cable Protection Systems. Pioneers in PE Pipe Technologies. Systems
2011 Twin Wall Ducting Systems Cable Protection Systems System s Pioneers in PE Pipe Technologies Index Electricity and Power Twin Wall p.4 General Utilities Twin Wall p.8 Motorway Communications Twin
More informationMECHANICAL OVERLOAD CLUTCHES SECTION CONTENTS
TRIG-O-MATIC LITE MECHANICAL OVERLOAD CLUTCHES LOR SERIES SECTION CONTENTS FEATURES...8 OPERATING PRINCIPLES...8 SELECTION...9 HOW TO ORDER...9 RATINGS AND DIMENSIONS...10 MOUNTING ARRANGEMENTS...11 BUSHING
More informationTooth Clutches. Series 5H and 55H-P Pressure Applied Tooth Clutch. Stationary Cylinder for Dry Operation or in Oil. Series 5H and 55H-P
Series 5H and 55H-P Series 5H and 55H-P Pressure Applied Tooth Clutch Stationary Cylinder for Dry Operation or in Oil Features Tooth clutch gives positive drive with no slip Shielded bearings need no lubrication
More information3. Timing Belt 2-3 SERVICE PROCEDURE A: REMOVAL 1. CRANKSHAFT PULLEY AND BELT COVER
SERVICE PROCEDURE 2-3 A: REMOVAL 1. CRANKSHAFT PULLEY AND BELT COVER G2M0107 1) Remove V-belt and A/C belt tensioner. 2) Remove pulley bolt. To lock crankshaft use ST. ST 499977000 CRANKSHAFT PULLEY WRENCH
More informationHAYES ORIGINAL FLYWHEEL COUPLINGS
HAYES ORIGINAL FLYWHEEL COUPLINGS Original Flywheel Couplings There are thousands of Hayes Original Flywheel Couplings in service throughout the world. They are used in gas and tough diesel engine applications
More informationRear Axle Hub, Bearing, Cup, and/or Seal Replacement
Page 1 of 11 Rear Axle Hub, Bearing, Cup, and/or Seal Replacement Special Tools J 8092 Universal Driver Handle - 3/4 inch - 10 J 2222-C Wheel Bearing Nut Wrench J 24426 Wheel Bearing Race Installer - Outer
More informationTOUGH SIMPLE GEAR PUMPS COST EFFECTIVE TOUGH SIMPLE COST EFFECTIVE. Tel: / Int'l: Fax: / Int'l:
GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products, in conjunction
More informationMulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
More informationProduct Range Modules ROSTA Tensioner Devices
Product Range Modules ROSTA Page 17 14 Tensioning Technology Chain Tensioning Roller chains are power transmission components with positive transmission which, by virtue of their design are subject, depending
More informationPARTS VIEW 22.5 DRUM BRAKE AXLE KF22 SERIES
PARTS VIEW DRUM BRAKE AXLE KF22 SERIES IMAGES FOR ILLUSTRATION PURPOSES ONLY www.khitch.com.au Bulletin No: KPS-001-0912-Rev02 1 QUANTITY PER AXLE PARTS VIEW DRUM BRAKE AXLE KF22 SERIES Ref No. PART No.
More informationMTMANUAL TRANSMISSION GENERAL 1. SPECIFICATIONS. 1) General Specifications. 2) Tightening Torque MANUAL TRANSMISSION
03-3 MT GENERAL 1. SPECIFICATIONS 1) General Specifications 2) Tightening Torque 03-4 OVERVIEW AND OPERATION PROCESS 1. OVERVIEW 4WD Features 1. All gears use the helical type and high strength materials.
More informationTiming Drive Components ( )
Page 1 of 14 (12.65.13) Removal 1. Remove the engine front cover. For additional information, refer to For additional information, refer to. 2. Remove the spark plugs. 3. Remove the crankshaft position
More informationPRODUCT INFORMATION FENNER V-BELTS AND WEDGE BELTS
PRODUCT INFORMATION FENNER V-BELTS AND WEDGE BELTS Not all belts are the same. Fenner belts are made to exacting specifications and have set the standard in technical development in the toughest applications
More informationisaregisteredtrademarkofcustom Machine&ToolCo.,Inc.Copyright Custom Machine&ToolCo.,Inc.Alrightsreserved.
CMT isaregisteredtrademarkofcustom Machine&ToolCo.,Inc.Copyright 1998-2017Custom Machine&ToolCo.,Inc.Alrightsreserved. WHAT IS CONCENTRIC MAXI TORQUE? CMT is a revolutionary new keyless tapered bushing,
More informationHR930 Rotary Rake. Illustrated Parts Breakdown. Tongue & Main Frame. Gearbox & Tine Arm
HR0 Rotary Rake Illustrated Parts Breakdown Page Page Page Page Page Page Tongue & Main Frame Guards Gearbox & Tine Arm Axle Assembly Rotary Gearbox PTO Shaft 0//0 Tongue & Main Frame 0 0 0 0 Ref# Description
More information560 and 680 Parts Manual
560 and 680 Parts Manual There have been four series of drive mechanism on the 560 &680 model Farm Aid TMR mixers. Series I has different front drive between the 680 and the 560. The drive in the rear
More informationGEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE
GEAR PUMPS TOUGH TOUGH SIMPLE SIMPLE COST EFFECTIVE COST EFFECTIVE NOMAD GEAR PUMPS California-based JDA GLOBAL LLC, the world s largest provider of after-market diaphragm pump products, in conjunction
More informationSIT S.p.A. Commercial & Technical Office, Central Warehouse. Viale A. Volta, Cusago (MI) - Italy Tel Fax
opertina_atene EN_over ing.qxd 26/01/2015 13:31 Pagina 1 ommercial & Technical Office, entral arehouse SIT S.p.. Viale. Volta, 2 20090 usago (MI) - Italy Tel. +39.02.89144.1 Fax +39.02.89144293 E-mail:
More informationE17H RAIL WHEEL INSPECTION
E17H RAIL WHEEL INSPECTION PURPOSE AND SCOPE This Procedure applies to all items of rolling stock purchased or acquired through hiring or other means by Laing O Rourke for the railway operations they will
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 280 SERIES SECTION: 59
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SERIES SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE,
More informationHDX rake FeaTUreS SpeCiFiCaTiONS X-SerieS rake X & HDX model X10 X12 X13 X15 Wheel diameter teeth per Wheel rakes rake tooth diameter
X & HDX RAKES X-RAKE FEATURES The H&S X-Series Rakes feature a highly maneuverable short turning radius, no caster wheel design, and an overhead frame design for high volume capacity of Crop. The variable
More informationlea) shows a compression type. These couplings are used for
Mechanical Equipment - Course 230.1 SHAFT COUPLINGS Couplings Couplings are used to join two shafts provide some means of transmitting power source to a driven member. There are two tiona of couplings,
More informationUniversal Platform. 246 Model Section 4. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...
Universal Platform 246 Model Section 4 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup
More informationlbs sq. Camshaft bush ID 0.5 ± Clearance bush to camshaft ±
GENERAL Cubic capacity 347 C.C. Stroke 93 mm. / 3.6614 Cylinder bore Compression ratio Max compression at kick starter speed 2 23 /32 = 2.7187 ± 0.0005 (Re-bore to + 0.02 when wear exceeds 0.008 ). Note:
More informationDifferential, Disassembling and Assembling Special tools
Differential, Disassembling and Assembling Special tools VAG 1582 Bearing puller VAG 1582/3 Grip piece VW 412 Thrust disc 40-105 Thrust piece VW 401 Thrust plate VW 402 Thrust plate VW 408 A Punch VW 473
More informationELIET SPARE PARTS MANUAL SUPER PROF 2000 OVERVIEW OF EXPLODE VIEW DRAWINGS DRAWING DESCRIPTION DRAW. REF. MODIFIED
ELIET SPARE PARTS MANUAL SUPER PROF 2000 OVERVIEW OF EXPLODE VIEW DRAWINGS DRAWING DESCRIPTION DRAW. REF. MODIFIED 1 EXPLODED VIEW DRAWING 1 MACHINE LEFT SIDE MMA 01 070 110-1 9-ott-2003 2 EXPLODED VIEW
More informationCOUNTER SHAFT NUT LOCKING PLATE 1 $ HOIST DRUM CLUTCH EYE BOLTS 1 $ LEFT DRUM CLUTCH THREADED PIN 2 $ 138.
1 2184 PULLEY FOR RADIATOR FAN 1 $ 326.25 2 2184 PULLEY FOR RADIATOR FAN 1 $ 326.25 3 3331 REAR DRUM BRAKE RETURN SPRING 5 $ 51.31 5 10285 LEFT REAR DRUM BRAKE AIR CAN REACH ROD ( LONG ROD ) 1 $ 85.12
More informationSTOCK MITRE GEARS 1.5MOD 4.0MOD 32DP 3 DP STOCK BEVEL GEARS 1.5MOD 4.0MOD 12DP 6DP
STOK ITRE GERS 1.5O 4.0O P 3 P STOK EVE GERS 1.5O 4.0O P P amira Street South ustralia, 50 Phone: (0) 34 5522 ax: (0) 34 511 e-mail: hercus@hercus.com.au Website: www.hercus.com.au STOK ITRE GERS PITH
More informationTROUBLESHOOTING SPECIAL TOOL ASSEMBLY AND ADJUSTMENT
1 INDEX Models FD, FE, FF and SG REAR AXLE 10-1 10-108E-07 CHAPTER 10 REAR AXLE Models FD, FE, FF and SG TROUBLESHOOTING...10-2 10 SPECIAL TOOL...10-3 WHEEL HUB AND RELATED PARTS DISASSEMBLY...10-7 INSPECTION...10-9
More informationUniversal Platform. 222 Model Section 3. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...
Universal Platform 222 Model Section 3 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup
More informationChain Drives. Chain Drives
08 Chain Drives Chain Drives 166 Renold Roller Chains Synergy BS Roller Chain - Duplex Synergy BS Roller Chain - Simplex Renold No. ISO No. Pitch inch A Pitch mm A Inside Width B Roller diam C 116038
More informationFMB-DDSP Belt for High Load and Low Load Pulleys
FMB-DDSP Belt for High Load and Low Load Pulleys Flat, Positive Drive, Smooth & Impression Top Belt Material: Volta MB, Blue Coefficient of friction (Dry): Hardness: 95A / 46D Steel: 0.5 Temp. Range: -30
More information2002 F-Super Duty /Excursion Workshop Manual
Page 1 of 25 SECTION 307-01: Automatic Transaxle/Transmission 2002 F-Super Duty 250-550/Excursion Workshop Manual ASSEMBLY Procedure revision date: 05/23/2001 Transmission Special Tool(s) Remover, O-Ring
More informationOne Step Rod Cutter Rear Pull
One Step Rod Cutter Rear Pull Drivelines Section 13 Model Years 1988 1991 (Secondary Driveline) 1 Solid Shaft... 2-5 Model Years 1988 1992 (Primary Driveline) G & G... 6-11 Model Year 1992 (Secondary Driveline)
More informationPLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2
Index SECTION L PRODUCT PAGE INDEX...L-1 PLASTIC CAPABILITIES...L-2 SECTION I NON-METALLIC SPROCKETS...L-3 - L-12 Sprockets - Stock No. 25 1/4" Pitch...L-3 No. 35 3/8" Pitch...L-4 No. 40 1/2" Pitch...L-5
More informationSHAFT FIXINGS SHAFT FIXINGS
Shaft Fixings Design Data Required Shaft dimensions diameter and tolerance length Keyway details if present Torque to be transmitted Product hub details diameter length material (strength) Special considerations
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1206 Third edition 2001-11-15 Rolling bearings Needle roller bearings, dimension series 48, 49 and 69 Boundary dimensions and tolerances Roulements Roulements à aiguilles, séries
More information