Backflow Prevention Products and Parts

Transcription

1 Ames Fire & Waterworks Product Catalog Backflow Prevention Products and Parts For Fire Protection and Municipal Waterworks AmesFireWater.com

2 Excellence Matters Specify It Since 19 Ames Fire & Waterworks has been a leader in the manufacture of valves and fittings for all types of pipeline systems. Ames products serve the fire protection, irrigation and waterworks markets and have a reputation of excellence in the industry. Ames production process promotes consistent quality control and prompt customer service. This catalog features Ames s standard products; Ames also offers a wide variety of custom products upon request. If excellence matters to you, then specify Ames. Lead Free* Transition Backflow prevention has critical implications in potable water supply systems. With the changeover to Lead Free in the United States effective January, 01, Lead Free backflow prevention devices are required in many applications and/or settings. The Ames backflow preventer product line includes many Lead Free versions of our trusted and reliable backflow products. Standard Material Products (not Lead Free) COTAI MORE TA 0.5% LEAD. It is illegal to use this product in any plumbing system providing water for human consumption, such as drinking or dishwashing, in the United States. Before installing standard material product, consult your local water authority, building and plumbing codes. *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. Ames Fire & Waterworks

3 Table of Contents Section 1 Double Check Valve Assemblies M00, M00... C00, C SS... LF000B, 000B... Section Double Check Detector Assemblies LFM300, LFM300, M300, M LFC300, LFC300, C300, C SS BMI... 1 Section 3 Reduced Pressure Zone Assemblies M00, M00, M00Z... 1 C00, C00, C00Z SS BLT, 000MB... 3 LF000B, 000B... Section Reduced Pressure Detector Assemblies LFM500, LFM500, LFM500Z, M500, M500, M500Z.... LFC500, LFC500, LFC500Z, C500, C500, C500Z SS Section 5 Detector Check Valves 00SS DCV, 05DCV, DCV... 3 Section Miscellaneous Products In-Building Riser UL/FM Fire Service Strainers Series 7001, Stainless Steel Strainers Series 000F, 000G... 3 Air Gaps, Elbows Test Cocks, Caps & Tethers Test Kit Model ATG Spools, Flanges Valve Setter AVS... 3 ASCV Section 7 Flow Charts... 0 ote: Ames product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Ames Technical Service. Ames reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Ames products previously or subsequently sold.

4 Maxim Series M00, M00 Double Check Valve Assemblies Sizes: 1 " " (5 50mm) 1 Double Check Valve Assemblies M00 OSY M00 BFG The Maxim Series M00, M00 Double Check Valve Assemblies are LEAD FREE * used to prevent backflow of pollutants, that are objectionable but not toxic, from entering the potable water supply system. The Maxim M00, M00 may be installed under continuous pressure service and may be subjected to backpressure. The Maxim M00, M00 consists of two independently operating check valves, two shutoff valves, and four test cocks. For use in non-health hazard applications. The Maxim M00, M00 features Lead Free* construction to comply with Lead Free* installation requirements. Features Extremely Compact Design 70% Lighter than Traditional Designs 30 (Schedule 0) Stainless Steel ousing & Sleeve Groove Fittings Allow Integral Pipeline Adjustment Patented Tri-Link Checks Provides Lowest Pressure Loss Unmatched Ease of Serviceability Available with Grooved Butterfly Valve Shutoffs Available for orizontal, Vertical or Pattern Installations Replaceable Check Disc Rubber Materials ousing & Sleeve: 30 (Schedule 0) Stainless Steel Elastomers: EPDM, Silicone and Buna- Tri-Link Checks: oryl, Stainless Steel Check Discs: Reversible Silicone or EPDM Test Cocks: Bronze Body ickel Plated Pins & Fasteners: 300 Series Stainless Steel Springs: Stainless Steel Available Models Suffix: RS non-rising stem resilient seated gate valves OSY UL/FM outside stem and yoke resilient seated gate valves BFG UL/FM grooved gear operated butterfly valves w tamper switch **OSY FxG flanged inlet gate connection and grooved outlet gate connection **OSY GxF grooved inlet gate connection and flanged outlet gate connection **OSY GxG grooved inlet gate connection and grooved outlet gate connection Available with grooved RS gate valves - consult factory** Post indicator plate and operating nut available - consult factory** **Consult factory for dimensions Pressure Temperature Tem per a ture Range: 33 F 1 F (0.5 C 3 C) Maximum Working Pres sure: 175 (.1 bar) Approvals ** ** *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. (**BFG & OSY Only) For additional approval information please contact the factory or visit our web site at For additional information, request literature ES-A-M00/M00. Flow Charts on p B.5

5 Dimensions Weights M00, M00 A C (open) D SIZE (D) DIMESIOS (APPROX.) WEIGT A C D G I J P M00 M00 OSY RS OSY RS OSY RS in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. lbs. kgs. lbs. kgs. 1 / / / / / / / / / / / / 79 1 / / / / / / / / 9 3 / 57 3 / / 30 1 / / / / / / / / / / / / / / / / / 11 3 / / / / / / / / / 17 5 / G J I P Double Check Valve Assemblies 1 C D J I A G P M00BFG, M00BFG SIZE (D) DIMESIOS (APPROX.) WEIGT A C D G I J P M00BFG M00BFG in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs IMPORTAT: Inquire with governing authorities for local installation requirements 3

6 Colt Series C00, C00 Double Check Valve Assemblies Sizes: 1 " " (5 50mm) 1 Double Check Valve Assemblies C00 OSY The Colt Series C00, C00 Double Check Valve Assemblies are used LEAD FREE * to prevent backflow of pollutants, that are objectionable but not toxic, from entering the potable water supply system. The Colt C00, C00 may be installed under continuous pressure service and may be subjected to backpressure. The Colt C00, C00 consists of two independently operating check valves, two shutoff valves, and four test cocks. For use in non-health hazard applications. The Colt Series C00, C00 features Lead Free* construction to comply with Lead Free* installation requirements. Features Extremely Compact Design 70% Lighter than Traditional Designs 30 (Schedule 0) Stainless Steel ousing & Sleeve Groove Fittings Allow Integral Pipeline Adjustment Patented Tri-Link Check Provides Lowest Pressure Loss Unmatched Ease of Serviceability Available with Grooved Butterfly Valve Shutoffs Available for orizontal, Vertical or Pattern Installations Replaceable Check Disc Rubber Materials ousing & Sleeve: 30 (Schedule 0) Stainless Steel Elastomers: EPDM, Silicone and Buna- Tri-Link Checks: oryl, Stainless Steel Check Discs: Reversible Silicone or EPDM Test Cocks: Bronze Body ickel Plated Pins & Fasteners: 300 Series Stainless Steel Springs: Stainless Steel Available Models Suffix: RS non-rising stem resilient seated gate valves OSY UL/FM outside stem and yoke resilient seated gate valves BFG UL/FM grooved gear operated butterfly valves w/tamper switch **OSY FxG flanged inlet gate connection and grooved outlet gate connection **OSY GxF grooved inlet gate connection and flanged outlet gate connection **OSY GxG grooved inlet gate connection and grooved outlet gate connection Available with grooved RS gate valves - consult factory** Post indicator plate and operating nut available - consult factory** **Consult factory for dimensions Pressure Temperature Tem per a ture Range: 33 F 10 F (0.5 C 0 C) Maximum Working Pres sure: 175 (.1 bar) Approvals C00 BFG ** ** oryl is a registered trademark of SABIC Innovative Plastics TM. *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. 15 B.5 (**BFG & OSY Only) For additional approval information please contact the factory or visit our web site at For additional information, request literature ES-A-C00/C00. Flow Charts on p. 1

7 Dimensions Weights C00, C00 A C (open) D SIZE (D) DIMESIOS WEIGT A C (OSY) C (RS) D G I J P C00RS C00OSY C00 RS C00 OSY in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. lbs. kgs. lbs. kgs G J I P Double Check Valve Assemblies 1 C D J I C00BFG, C00BFG A G P SIZE (D) DIMESIOS WEIGT A C D G I J P C00BFG C00BFG in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs oryl is a registered trademark of SABIC Innovative Plastics. IMPORTAT: Inquire with governing authorities for local installation requirements 5

8 SilverBullet Series 000SS Double Check Valve Assemblies 000SS: Sizes: 1 " " (5 300mm) 1 Double Check Valve Assemblies 000SS The SilverBullet TM Series 000SS Double Check Valve Assemblies are LEAD FREE * de signed to pre vent the re verse flow of polluted water from entering the po ta ble wa ter supply. These mod els can be applied, where ap proved by the local authority hav ing jurisdiction, on non-health hazard installations. Series 000SS feature short end-to-end dimensions, light weight stainless steel body, and the lowest head loss available. The Series 000SS features Lead Free* construction to comply with Lead Free* installation requirements. Features Cam-Check Assembly provides low head loss Short lay length is ideally suited for retrofit installations Stainless steel body is half the weight of com pet i tive designs reducing installation and shipping costs Stainless steel construction provides long term corrosion protection and maximum strength Single top access cover with two-bolt grooved style coupling for ease of maintenance o special tools required for servicing Compact construction allows for smaller vaults and enclosures May be installed in horizontal or vertical flow up position Available Models Suffix: RS non-rising stem resilient seated gate valves OSY UL/FM outside stem and yoke resilient seated gate valves LG without gate valves **OSY FxG flanged inlet gate connection and grooved outlet gate connection **OSY GxF grooved inlet gate connection and flanged outlet gate connection **OSY GxG grooved inlet gate connection and grooved outlet gate connection Available with grooved RS gate valves - consult factory** Post indicator plate and operating nut available - consult factory** **Consult factory for dimensions Materials All internal metal parts: 300 Series stain less steel Main valve body: 300 Series stainless steel Check assembly: oryl Pressure Temperature Temperature Range: 33 F 1 F (0.5 C 3 C) Maximum Working Pressure: 175 (.1 bar) Approvals 15 (OSY only) ("-" OSY only) Flange dimension in accordance with AWWA Class D For additional approval information please contact the factory or visit our web site at oryl is a registered trademark of SABIC Innovative Plastics TM. *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. For additional information, request literature ES-A-000SS. Flow Charts on p.

9 Dimensions Weights 000SS L A D C (Open) SIZE (D) DIMESIOS (APPROX.) WEIGT A C D L S w/gates w/o Gates OSY RS in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs S Double Check Valve Assemblies 1 IMPORTAT: Inquire with governing authorities for local installation requirements 7

10 Series LF000B, 000B Double Check Valve Assemblies Sizes: 1 " " (15 50mm) 1 Double Check Valve Assemblies Features Ease of maintenance with only one cover Top entry Replaceable seats and seat discs Modular construction Compact design 1 " " (15 50mm) Cast bronze body construction Top mounted ball valve test cocks Low pressure drop o special tools required 1 " 1" (15 5mm) have tee handles Pressure Temperature Temperature Range: 33 F 10 F (0.5 C C) Maximum Working Pressure: 175 (.1 bar) " 000B C (50mm) LF000B 3 " 000B (0mm) Series LF000B, 000B Double Check Valve LEAD FREE * Assemblies shall be installed at ref er enced crosscon nec tions to prevent the backflow of polluted water into the po ta ble water supply. Only those cross-con nec tions identified by local in spec tion au thor i ties as non-health hazard shall be allowed the use of an ap proved double check valve as sem bly. Check with local authority having jurisdiction regarding vertical orientation, frequency of testing or other installation requirements. LF000B features Lead Free* construction to comply with Lead Free installation requirements. Available Models B quarter turn ball valves LBV less ball valves Approvals 15 B.5 1-G For additional approval information please contact the factory or visit our web site at *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. For additional information, request literature ES-A-000B, ES-A-LF000B. Flow Charts on p. -3

11 000B For Use in on-potable Applications Series 000B are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements for non-potable service applications such as irrigation, fireline, or industrial processing. Available Models Suffix: B quarter turn ball valves LBV less ball valves S stainless steel ball valve handles C 1 " inlet outlet fire hydrant fit ting (" valve) Prefix: U union connections Approvals 15 B.5 For additional approval information please contact the factory or visit our web site at Double Check Valve Assemblies 1 Dimensions Weights A C B F G I LF000B/000B SIZE (D) DIMESIOS WEIGT A B C F G I in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs Standard 000B-C fire hydrant fittings dimension "A" = 3 1 /" (59mm) Strainer sold separately IMPORTAT: Inquire with governing authorities for local installation requirements 9

12 Maxim Series LFM300, LFM300, M300, M300 Double Check Detector Assemblies Sizes: 1 " " (5 50mm) M300 OSY Double Check Detector Assemblies M300 BFG Features Extremely Compact Design 70% Lighter than Traditional Designs 30 (Schedule 0) Stainless Steel ousing & Sleeve Groove Fittings Allow Integral Pipeline Adjustment Patented Tri-Link Check Provides Lowest Pressure Loss Unmatched Ease of Serviceability Available with Grooved Butterfly Valve Shutoffs Available for orizontal, Vertical or Pattern Installations Replaceable Check Disc Rubber Pressure Temperature Tem per a ture Range: 33 F 1 F (0.5 C 3 C) Maximum Working Pres sure: 175 (.1 bar) Approvals B.5 ** ** (**BFG & OSY Only) For additional approval information please contact the factory or visit our web site at *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. The Maxim Series LFM300, LFM300, M300, M300 Double Check Detector Assemblies are used to prevent backflow of pollutants, that are objectionable but not toxic, from entering the potable water supply system. The Maxim M300, M300 may be installed under continuous pressure service and may be subjected to backpressure. The Maxim LFM300, LFM300, M300, and M300 are used primarily on fire line sprinkler systems when it is necessary to monitor unauthorized use of water. For use in non-health hazard applications. LEAD FREE * Materials ousing & Sleeve: 30 (Schedule 0) Stainless Steel Elastomers: EPDM, Silicone and Buna- Tri-Link Checks: oryl, Stainless Steel Check Discs: Reversible Silicone or EPDM Test Cocks: Bronze Body ickel Plated Pins & Fasteners: 300 Series Stainless Steel Springs: Stainless Steel oryl is a registered trademark of SABIC Innovative Plastics TM. Series LFM300, LFM300 features Lead Free* construction to comply with Lead Free installation requirements. Available Models Suffix: OSY UL/FM outside stem and yoke, resilient seated gate valves BFG UL/FM grooved gear operated butterfly valves with tamper switch **OSY FxG flanged inlet gate connection and grooved outlet gate connection **OSY GxF grooved inlet gate connection and flanged outlet gate connection **OSY GxG grooved inlet gate connection and grooved outlet gate connection Available with grooved RS gate valves - consult factory** Post indicator plate and operating nut available - consult factory** **Consult factory for dimensions For additional information, request literature ES-A-M300/M300, ES-A-LFM300/LFM300. Flow Charts on p. 3

13 M300, M300 For Use in on-potable Applications Series M300, M300 are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codea and water authority requirements for non-potable service applications such as irrigation, fire line, or industrial processing. Dimensions Weights LFM300, LFM300 A C (open) D SIZE DIMESIOS WEIGT A C (OSY) D G I J P M300 M300 in in mm in mm in mm in mm in mm in mm in mm in mm lbs. kgs. lbs. kgs G J I P Double Check Detector Assemblies C D J I A P LFM300BFG, LFM300BFG SIZE DIMESIOS WEIGT A C D G I J P M300BFG M300BFG in. in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs G IMPORTAT: Inquire with governing authorities for local installation requirements 11

14 Colt Series LFC300, LFC300, C300, C300 Double Check Detector Assemblies Sizes: 1 " " (5 50mm) Double Check Detector Assemblies LFC300 Features Extremely compact design 70% lighter than traditional designs 30 (Schedule 0) stainless steel housing & sleeve Groove fittings allow integral pipeline adjustment Patented tri-link check provides lowest pressure loss Unmatched ease of serviceability Available with grooved butterfly valve shutoffs May be used for horizontal, vertical or pattern installations Replaceable check disc rubber Pressure-Temperature Temperature Range: 33 F 1 F (5 C 3 C) Maximum Working Pressure: 175 (.1 bar) Models Suffix: OSY UL/FM outside stem and yoke resilient seated gate valves BFG UL/FM grooved gear operated butterfly valves with tamper switch **OSY FxG Flanged inlet gate connection and grooved outlet gate connection **OSY GxF Grooved inlet gate connection and flanged outlet gate connection **OSY GxG Grooved inlet gate connection and grooved outlet gate connection LFC300, LFC300 LFC300 Series LFC300, LFC300 Double Check Detector Assemblies are used to prevent backflow of non-health LEAD FREE * hazard pollutants that are objectionable but not toxic, from entering the potable water supply system. The LFC300, LFC300 may be installed under continuous pressure service and may be subjected to backpressure and backsiphonage. Series LFC300, LFC300 is used primarily on fire line sprinkler systems when it is necessary to monitor unauthorized use of water. The LFC300 and LFC300 features Lead Free* construction to comply with Lead Free* installation requirements. Materials ousing & Sleeve: 30 (Schedule 0) Stainless Steel Elastomers: EPDM, Silicone and Buna- Tri-link Checks: oryl, Stainless Steel Check Discs: Reversible Silicone or EPDM Test Cocks: Lead Free* Copper Silicone Alloy Body ickel Plated Pins & Fasteners: 300 Series Stainless Steel Springs: Stainless Steel oryl is a registered trademark of SABIC Innovative Plastics *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. Approvals B.5 ** ** (**BFG & OSY Only) For additional information, request literature ES-A-C300/C300, ES-A-LFC300/LFC300. Flow Charts on p.

15 C300, C300 For Use in on-potable Applications Series C300, C300 Double Check Detector Assemblies are designed to prevent backflow on non-health hazard pollutants that are objectionable but not toxic to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements for non-potable service applications such as irrigation, fireline, or industrial processing. Approvals B.5 ** ** (**BFG & OSY Only) Dimensions Weights A C (open) D G Materials ousing & Sleeve: 30 (Schedule 0) Stainless Steel Elastomers: EPDM, Silicone and Buna- Tri-link Checks: oryl, Stainless Steel Check Discs: Reversible Silicone or EPDM Test Cocks: Bronze Body ickel Plated Pins & Fasteners: 300 Series Stainless Steel Springs: Stainless Steel J I P Double Check Detector Assemblies C300, C300 SIZE (D) DIMESIOS (APPROX.) WEIGT A C (OSY) D G I J P C300 C300 in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs C D J I A P C300BFG, C300BFG SIZE (D) DIMESIOS (APPROX.) WEIGT A C D G I J P C300BFG C300BFG in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs IMPORTAT: Inquire with governing authorities for local installation requirements 13

16 SilverBullet Series 3000SS Double Check Detector Assemblies 3000SS: Sizes: 1 " " (5 300mm) 3000SS Double Check Detector Assemblies The SilverBullet TM Series 3000SS Double Check Detector Assemblies are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements for non-potable service applications such as irrigation, fire line, or industrial processing. Features Cam-Check Assembly provides low head loss Short lay length is ideally suited for retrofit installations Stainless Steel body is half the weight of competitive designs reducing installation and shipping cost Stainless steel construction provides long term corrosion protection and maximum strength Single top access cover with two-bolt grooved style coupling for ease of maintenance o special tools required for servicing Compact construction allows for smaller vaults and enclosures Furnished with 5 " x 3 " bronze meter (gpm or cfm) Detects underground leaks and unauthorized water use Maybe installed horizontal or vertical "flow up" position Materials All internal metal parts: 300 Series stainless steel Main valve body: 300 Series stainless steel Check assembly: oryl Available Models Suffix: LG without gate valves OSY UL/FM outside stem and yoke resilient seated gate valves CFM cubic feet per minute GPM gallons per minute meter *OSY FxG flanged inlet gate connection and grooved outlet gate connection * OSY GxF grooved inlet gate connection and flanged outlet gate connection * OSY GxG grooved inlet gate connection and grooved outlet gate connection Available with grooved RS gate valves - consult factory* Post indicator plate and operating nut available - consult factory* *Consult factory for dimensions Pressure Temperature Temperature Range: 33 F 1 F (0.5 C 3 C) Maximum Working Pressure: 175 (.1 bar) Approvals (OSY only) Flange dimension in accordance with AWWA Class D. For additional approval information please contact the factory or visit our web site at 1 For additional information, request literature ES-A-3000SS Flow Charts on p. 5

17 Dimensions Weights C (Open) G D 3000SS L A SIZE (D) DIMESIOS (APPROX.) WEIGT A C (OSY) D G L P w/gates w/o Gates in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs P Double Check Detector Assemblies IMPORTAT: Inquire with governing authorities for local installation requirements 15

18 Series 3000BMI Double Check Detector Assembly Sizes: " (50mm) Double Check Detector Assemblies 3000BM1-FP-GPM Features Main Valve: Gear Operated Ball Valve Shutoffs with Pre-Wired Tamper Switches () Compact Design for Ease of Installation Inline Serviceable Assembly o Special Tools Required for Servicing Captured Modular Spring Loaded Checks Field Replaceable Seats & Discs Field Replaceable Auxiliary Bypass Line & Components Auxiliary Bypass: Compact Bypass Design; Remains within Main Valve Assembly Profile Inline Serviceable 1 " Backflow Assembly o Special Tools Required for Servicing Captured Modular Spring Loaded Checks Field Replaceable Seats & Discs Detect Potential Underground Water Leaks Detect Unauthorized Water Usage Material Specifications Body: Cast Bronze ASTM B5 Elastomers: Silicone O-Rings: EPDM Check Modules: Engineered Plastics Pressure Temperature Max. Working Pressure: 175 Min. Working Pressure: ydrostatic Test Pressure: 350 ydrostatic Safety Pressure Rating: 700 Continuous Operating Range: 33 F-1 F (0.5 C-3 C) Intermittent Operating Range up to 10 F (0 C) Must not exceed hour duration Configurable Options Suffix OSY: UL/FM Approved OS&Y Gate Valves (ASI/AWWA C515 Compliant) FP: UL Approved Gear Operated Ball Valves CFM: Cubic Feet per Minute 5 " x 3 " Water Meter (ASI/AWWA C700 Compliant) GPM: Gallon per Minute 5 " x 3 " Water Meter (ASI/AWWA C700 Compliant) LF: Less Shut-off valves; This is OT an APPROVED ASSEMBLY LM: o Water Meter Installed in Auxiliary Bypass Line Approvals 3000BM1-OSY-GPM Series 3000B Double Check Detector Assembly are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority regulations for non-potable service applications such irrigation, fire line, or industrial processing. The Series 3000B is ideal for use on non-health hazard fire protection systems to detect leaks or unauthorized water usage. Modular check design concept facilitates main te nance and as sem bly ac cess. All sizes are standardly equipped with re sil ient seat ed OSY shutoff valves and 5 " x 3 " (1 x 19mm) meter. For additional approval information please contact the factory or visit our web site at 1 For additional information, request literature ES-A-3000B. Flow Charts on p.

19 Dimensions Weights D (Open) C B A MODEL SIZE (D) DIMESIOS WEIGT A B C D I. MM I. MM I. MM I. MM I. MM LBS. KGS. 3000BM1-OSY BM1-FP Double Check Detector Assemblies IMPORTAT: Inquire with governing authorities for local installation requirements 17

20 Maxim Series M00, M00, M00Z Reduced Pressure Zone Assemblies Sizes: 1 " " (5 50mm) M00Z BFG 3 Reduced Pressure Zone Assemblies Features Extremely Compact Design M00 OSY The Maxim Series M00, M00, M00Z Reduced Pressure Zone LEAD FREE * Assemblies provide protection to the potable water system from contamination in accordance with national plumbing codes. The Maxim M00, M00, M00Z are normally used in health hazard applications for protection against backsiphonage, backpressure and the fouling of either check valve. The Series M00, M00U, M00Z features Lead Free* construction to comply with Lead Free* installation requirements. 70% Lighter than Traditional Designs 30 (Schedule 0) Stainless Steel ousing & Sleeve Groove Fittings Allow Integral Pipeline Adjustment Patented Link Check Provides Lowest Pressure Loss Unmatched Ease of Serviceability Available with Grooved Butterfly Valve Shutoffs Available for orizontal, Pattern or Z Pattern Installations Replaceable Check Disc Rubber Materials ousing & Sleeve: 30 (Schedule 0) Stainless Steel Elastomers: EPDM, Silicone and Buna Link Checks: oryl, Stainless Steel Check Discs: Reversible Silicone or EPDM Test Cocks: Bronze Body ickel Plated Pins & Fasteners: 300 Series Stainless Steel Springs: Stainless Steel Available Models Suffix: RS non-rising stem resilient seated gate valves OSY UL/FM outside stem and yoke, resilient seated gate valves BFG UL/FM grooved gear operated butterfly valves with tamper switch **OSY FxG flanged inlet gate connection and grooved outlet gate connection **OSY GxF grooved inlet gate connection and flanged outlet gate connection **OSY GxG grooved inlet gate connection and grooved outlet gate connection Available with grooved RS gate valves - consult factory** Post indicator plate and operating nut available - consult factory** **Consult factory for dimensions Pressure Temperature Tem per a ture Range: 33 F 1 F (0.5 C 3 C) Maximum Working Pres sure: 175 (.1 bar) Approvals ** ** *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. 13 B. (**BFG & OSY Only) For additional approval information please contact the factory or visit our web site at 1 For additional information, request literature ES-A-M00/M00/M00Z. Flow Charts on p.

21 Dimensions Weights C (open) J I M D A G P M00, M00, M00Z SIZE (D) DIMESIOS WEIGT A C (OSY) C (RS) D I P M G J M00OSY M00RS M00OSY M00RS in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. lbs. kgs. lbs. kgs J I M Reduced Pressure Zone Assemblies 3 G P M00BFG, M00ZBFG SIZE (D) DIMESIOS (APPROX.) WEIGT I P M G J in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs IMPORTAT: Inquire with governing authorities for local installation requirements 19

22 Colt Series C00, C00, C00Z Reduced Pressure Zone Assemblies Sizes: 1 " " (5 50mm ) C00 OSY C00 BFG 3 Reduced Pressure Zone Assemblies The Colt Series C00, C00, C00Z Reduced Pressure Zone LEAD FREE * Assemblies provide protection to the potable water system from contamination in accordance with national plumbing codes. The Colt C00, C00, C00Z are normally used in health hazard applications for protection against backsiphonage, backpressure and the fouling of either check valve. They feature Lead Free* construction to comply with Lead Free* installation requirements. Features Extremely Compact Design 70% Lighter than Traditional Designs 30 (Schedule 0) Stainless Steel ousing & Sleeve Groove Fittings Allow Integral Pipeline Adjustment Patented Link Check Provides Lowest Pressure Loss Unmatched Ease of Serviceability Available with Grooved Butterfly Valve Shutoffs May be Used for orizontal, Pattern or Z Pattern Installations Replaceable Check Disc Rubber Materials ousing & Sleeve: 30 (Schedule 0) Stainless Steel Elastomers: EPDM, Silicone and Buna Link Checks: oryl, Stainless Steel Check Discs: Reversible Silicone or EPDM Test Cocks: Bronze Body ickel Plated Pins & Fasteners: 300 Series Stainless Steel Springs: Stainless Steel Available Models Suffix: RS non-rising stem resilient seated gate valves OSY UL/FM outside stem and yoke, resilient seated gate valves BFG UL/FM grooved gear operated butterfly valves with tamper switch **OSY FxG flanged inlet gate connection and grooved outlet gate connection **OSY GxF grooved inlet gate connection and flanged outlet gate connection **OSY GxG grooved inlet gate connection and grooved outlet gate connection Available with grooved RS gate valves - consult factory** Post indicator plate and operating nut available - consult factory** **Consult factory for dimensions Pressure Temperature Tem per a ture Range: 33 F 10 F (0.5 C 0 C) Maximum Working Pres sure: 175 (.1 bar) Approvals ** ** oryl is a registered trademark of SABIC Innovative Plastics TM. 13 B. (**BFG & OSY Only) *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. For additional approval information please contact the factory or visit our web site at 0 For additional information, request literature ES-A-C00/C00/C00Z. Flow Charts on p. 7

23 Dimensions Weights C (open) J I M D A G P C00, C00, C00Z SIZE (D) DIMESIOS WEIGT A C (OSY) C (RS) D G I J M P C00 C00 RS OSY RS OSY in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. lbs. kgs. lbs. kgs J I M Reduced Pressure Zone Assemblies 3 G P C00 BFG/C00Z BFG SIZE (D) DIMESIOS WEIGT G I J M P C00, C00Z in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs C00 BFG SIZE (D) DIMESIOS WEIGT A C D P in. mm in. mm in. mm in. mm in. mm lbs. kgs C D A P IMPORTAT: Inquire with governing authorities for local installation requirements 1

24 SilverBullet Series 000SS Reduced Pressure Zone Assemblies Sizes: 1 " " (5 50mm) 3 Reduced Pressure Zone Assemblies The SilverBullet TM Series LEAD FREE * 000SS Re duced Pressure Zone Assemblies are de signed to provide pro tec tion of the potable water supply in ac cor dance with na tional codes. This series can be used where ap proved by the local authority having jurisdiction on health hazard cross-con nec tions. Se ries 000SS fea tures short lay length, light weight stain less steel body, cor ro sive re sistant stain less steel re lief valve, and cam-check assembly. Features Stainless steel construction provides long term corrosion resistance and maximum strength Stainless steel body is half the weight of com pet i tive designs reducing in stal la tion & ship ping costs Short end-to-end dimensions makes retrofit easy Cam-check assembly provides maximum flow at low pressure drop o special tools required for servicing Compact construction allows for smaller enclosures Stainless steel relief valve features a balanced rolling diaphragm to eliminate sliding seals and lower maintenance costs Materials All internal metal parts: 300 Series stainless steel Main valve body: 300 Series stainless steel Check assembly: oryl Flange dimension in accordance with AWWA Class D Available Models Suffix: RS non-rising stem resilient seat ed gate valves OSY UL/FM out side stem and yoke resilient seated gate valves LG without gate valves **OSY FxG flanged inlet gate connection and grooved outlet gate connection **OSY GxF grooved inlet gate connection and flanged outlet gate connection ** OSY GxG grooved inlet gate connection and grooved outlet gate connection Available with grooved RS gate valves - consult factory** Post indicator plate and operating nut available - consult factory** **Consult factory for dimensions Dimensions Weights 000SS OSY Pressure Temperature Temperature Range: 33 F 1 F (0.5 C 3 C) Maximum Working Pressure: 175 (.1 bar) Approvals C (open) D 13 (OSY only) (OSY only) For additional approval information please contact the factory or visit our web site at F L A SIZE (D) DIMESIOS (APPROX.) WEIGT A C D F L w/gates w/o Gates OSY RS in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs OTICE The installation of a drain line is recommended. When installing a drain line, an air gap is necessary. The 000SS should be installed with a minimum clearance of " between lowest point of the assembly and the floor drain or grade. *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. oryl is a registered trademark of SABIC Innovative Plastics TM. For additional information, request request literature literature ES-A-000SS Flow Charts on p. xx

25 Series 000BLT, 000MB ydrant Meter Backflow Preventers 000BLT: Size: 1 " FPT x 3" MPT 000MB: Size: 1 " 7ST x 3" 000BLT 000MB Series 000BLT, 000MB Portable ydrant Backflow Preventers are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements for non-potable service applications such as irrigation, fireline, or industrial processing. For use in protection of water from a fire hydrant or other nonpermanent installation where flow is in one direction only and the possibility of a cross-connection exists. This model can be used where approved by the local authority having jurisdiction on health hazard cross-connections. Ideal for use with client s existing hydrant meter hookup. Features eavy duty relief valve cover prevents vandalism and protects valve from damage when 000MB is transported to another fire hydrant location In-line flow restrictor protects the meter measuring element and the backflow preventer components from damage due to excessive flow (000MB only) Backflow preventer made from 300 Series stainless steel for corrosion resistance Portable lightweight design makes device easily transportable between job sites Accurately measures flow (MB Series) and protects the water supply from possible contamination Series 000BLT comes less meter Built-In support leg with surface saddle is adjustable in the field Factory assembled and tested; no field assembly required; eliminates leaks and improper assembly Options (BLT Series) Inlet modules 3" female or male hydrant thread 1 " female or male hydrant thread 1 "male PT thread Customer specified Outlet modules 3" gate w/female or male hose thread 1 " gate w/female or male hose thread 3" gate valve only, w/3" IPT thread 1 " gate valve only, w/ 1 " FPT thread Customer specified Reduced Pressure Zone Assemblies 3 Dimensions Weights 1 " MODEL WEIGT lbs. kgs. 000BLT 000MB-GPM MB-CFM " 0 1 " 9 3 1" IMPORTAT: Inquire with governing authorities for local installation requirements For additional information, request literature ES-A-000BLT or ES-A-000MB. Flow Charts on p. 3

26 Series LF000B, 000B Reduced Pressure Zone Assemblies Sizes: 1 " " (15 50mm) 1 " (15mm) 000B " (50mm) 000B-C 3 Reduced Pressure Zone Assemblies Features Single access cover and modular check construction for ease of maintenance Top entry - all internals immediately accessible Captured springs for safe maintenance Internal relief valve for reduced installation clearances Replaceable seats for economical repair Lead Free* cast copper silicon alloy body construction for durability 1 " " Ball valve test cocks screwdriver slotted Large body passages provides low pressure drop Compact, space saving design o special tools required for servicing Pressure-Temperature Series LF000B, 000B: 1 " - " ( 50mm) Suitable for supply pressure up to 175 (.1 bar). Water temperature: 33 F 10 F ( C). LF000B LEAD FREE * Series LF000B Reduced Pressure Zone Assemblies are designed to protect potable water supplies in accordance with national plumbing codes and water authority requirements. This series can be used in a variety of installations, including the prevention of health hazard cross-connections in piping systems or for containment at the service line entrance.the LF000B features Lead Free* construction to comply with Lead Free* installation requirements. This series features two in-line, independent check valves, captured springs and replaceable check seats with an intermediate relief valve. Its compact modular design facilitates easy maintenance and assembly access. Sizes 1 " 1" shutoffs have tee handles. Materials Lead Free* cast copper silicon alloy body construction, silicone rubber disc material in the first and second check plus the relief valve. Replaceable polymer check seats for first and second checks. Removable stainless steel relief valve seat. Stainless steel cover bolts. Furnished with quarter-turn, full port, resilient seated, Lead Free* cast copper silicon alloy body ball valve shutoffs. Models Suffix: B - quarter-turn ball valves Approvals 13 B. ASSE, AWWA, CSA, IAPMO Approved by the Foundation for Cross- Connection Control and ydraulic Research at the University of Southern California. *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. For additional information, request literature ES-A-000B, ES-A-LF000B. Flow Charts on p. 9

27 000B For Use in on-potable Applications Series 000B Reduced Pressure Zone Assemblies are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements for non-potable service applications such as irrigation, fireline, or industrial processing. This series features two in-line, independent check valves, captured springs and replaceable check seats with an intermediate relief valve. Its compact modular design facilitates easy maintenance and assembly access. Sizes 1 " 1" shutoffs have tee handles. Materials Bronze body construction, silicone rubber disc material in the first and second check plus the relief valve. Replaceable polymer check seats for first and second checks. Removable stainless steel relief valve seat. Stainless steel cover bolts. Standardly furnished with PT body connections. For optional bronze union inlet and outlet connections, specify prefix U ( 1 " "). Series 000B furnished with quarter turn, full port, resilient seated, bronze ball valve shutoffs Models Size: 1 " " ( 50mm) Suffix: B quarter-turn ball valves LBV less ball valves S stainless steel ball valve handles C 1 " inlet/outlet fire hydrant fitting S bronze strainer Prefix: U union connections Approvals ASSE, AWWA, CSA, IAPMO Approved by the Foundation for Cross- Connection Control and ydraulic Research at the University of Southern California. UL Classified 3 " " Approval models QT, U Reduced Pressure Zone Assemblies 3 Dimensions Weights LF000B C SIZE DIMESIOS WEIGT A B C D L in. in. mm in. mm in. mm in. mm in. mm lbs. kg w Strainer sold separately A L D B IMPORTAT: Inquire with governing authorities for local installation requirements 5

28 Maxim Series LFM500, LF500, LF500Z, M500, M500, M500Z Reduced Pressure Detector Assemblies Sizes: 1 " " (5 50mm) M500 M500 OSY Reduced Pressure Detector Assemblies LEAD FREE * The Maxim Series LFM500, LFM500, LFM500Z Reduced Pressure Detector Assemblies provide protection to the potable water system from contamination in accordance with national plumbing codes. The LFM500, LFM500, LFM500Z are normally used in health hazard applications to protect against backsiphonage, backpressure and the fouling of either check valve. They are used to monitor unauthorized use of water from the fire protection system. LFM500, LF500, LF500Z feature Lead Free* construction to comply with Lead Free* installation requirements. Features Extremely Compact Design 70% Lighter than Traditional Designs 30 (Schedule 0) Stainless Steel ousing & Sleeve Groove Fittings Allow Integral Pipeline Adjustment Patented Link Check Provides Lowest Pressure Loss Unmatched Ease of Serviceability Available with Grooved Butterfly Valve Shutoffs Available for orizontal, Pattern or Z Pattern Installations Replaceable Check Disc Rubber Materials ousing & Sleeve: 30 (Schedule 0) Stainless Steel Elastomers: EPDM, Silicone and Buna Link Checks: oryl, Stainless Steel Check Discs: Reversible Silicone or EPDM Pins & Fasteners: 300 Series Stainless Steel Springs: Stainless Steel Available Models Suffix: **OSY UL/FM outside stem and yoke, resilient seated gate valves **BFG UL/FM grooved gear operated butterfly valves with tamper switch **OSY FxG flanged inlet gate connection and grooved outlet gate connection **OSY GxF grooved inlet gate connection and flanged outlet gate connection **OSY GxG grooved inlet gate connection and grooved outlet gate connection Available with grooved RS gate valves - consult factory** Post indicator plate and operating nut available - consult factory** **Consult factory for dimensions Approvals 7 B. ** ** (**BFG & OSY Only) Pressure Temperature Tem per a ture Range: 33 F 1 F (0.5 C 3 C) Maximum Working Pres sure: 175 (.1 bar) For additional approval information please contact the factory or visit our web site at oryl is a registered trademark of SABIC Innovative Plastics TM. *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. For additional information, request literature ES-A-LFM500/LFM500/LFM500Z or ES-A-M500/M500/M500Z. Flow Charts on p. 50

29 M500, M500, M500Z For Use in on-potable Applications M500, M500, M500Z are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements for non-potable service applications such as irrigation, fire line, or industrial processing. Dimensions Weights C (open) J I M LFM500, LFM500, LFM500Z A D P SIZE DIMESIOS WEIGT A C (OSY) D I P M G J M500 M500 in. in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs. 1 / 30 3 / / 1 1 / / / / / / / / / / / / / / / / 9 3 / / / / / / / / / / / / / / / / / / / / / / / / / /1 9 1 / / 5 5 / / / J I G M Reduced Pressure Detector Assemblies P G LFM500BFG, LFM500ZBFG SIZE DIMESIOS WEIGT I P M G J in. in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. 1 / / / / / / / / / /1 1 / / / / / / / / / / / IMPORTAT: Inquire with governing authorities for local installation requirements 7

30 Colt Series LFC500, LFC500, LFC500Z, C500, C500, C500Z Reduced Pressure Detector Assemblies Sizes: 1 " " (5 50mm) C500 OSY Reduced Pressure Detector Assemblies Features Extremely compact design 70% lighter than traditional designs 30 (Schedule 0) stainless steel housing & sleeve Groove fittings allow integral pipeline adjustment Patented torsion spring check provides lowest pressure loss Unmatched ease of serviceability Replaceable check disc rubber Available with grooved butterfly valve shutoffs Bottom mounted cast stainless steel relief valve Metered bypass to detect leakage or theft of water from the fire sprinkler system Pressure-Temperature Temperature Range: 33 F 1 F (0.5 C 3 C) Maximum Working Pressure: 175 (.1 bar) Models Suffix: OSY UL/FM outside stem and yoke, resilient seated gate valves BFG UL/FM grooved gear operated butterfly valves with tamper switch **OSY FxG Flanged inlet gate connection and grooved outlet gate connection **OSY GxF Grooved inlet gate connection and flanged outlet gate connection **OSY GxG Grooved inlet gate connection and grooved outlet gate connection LFC500, LFC500, LFC500Z LEAD FREE * Series LFC500, LFC500, LFC500Z Reduced Pressure Detector Assemblies provide protection to the potable water system from contamination in accordance with national plumbing codes. The LFC500, LFC500, LF500Z are normally used in health hazard applications to protect against backsiphonage and backpressure. The Series LFC500, LFC500, LFC500Z are used to monitor unauthorized use of water from the fire protection system. They feature Lead Free* construction to comply with Lead Free* installation requirements. Materials ousing & Sleeve: 30 (Schedule 0) Stainless Steel Elastomers: EPDM, Silicone and Buna- Torsion Spring Checks: oryl, Stainless Steel Check Discs: Reversible Silicone or EPDM Test Cocks: Lead Free* Bronze Body ickel Plated Pins & Fasteners: 300 Series Stainless Steel Springs: Stainless Steel Available with grooved RS gate valves - consult factory** Post indicator plate and operating nut available - consult factory** **Consult factory for dimensions Approvals 7 B. ** ** (**BFG & OSY Only) oryl is a registered trademark of SABIC Innovative Plastics TM. *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. For additional information, request literature ES-A-C500/C500/C500Z or ES-A-LFC500/LFC500/LFC500Z. Flow Charts on p. 51

31 C500, C500, C500Z For Use in on-potable Applications Series C500, C500, C500Z Reduced Pressure Detector Assemblies are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements for non-potable service applications such as irrigation, fireline, or industrial processing. The C500, C500, C500Z are normally used in health hazard applications to protect against back-siphonage and backpressure. They are used to monitor unauthorized use of water from the fire protection system. Approvals ** ** Materials ousing & Sleeve: 30 (Schedule 0) Stainless Steel Elastomers: EPDM, Silicone and Buna- Torsion Spring Checks: oryl, Stainless Steel Check Discs: Reversible Silicone or EPDM Test Cocks: Bronze Body ickel Plated Pins & Fasteners: 300 Series Stainless Steel Springs: Stainless Steel Dimensions Weights 7 B. (**BFG & OSY Only) A C (open) LFC500, LFC500, LF500Z & C500, C500, C500Z D G SIZE DIMESIOS WEIGT J A C (OSY) D G I J M P C500 C500 in. in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs I M P Reduced Pressure Detector Assemblies J I M G P LFC500, C500 SIZE DIMESIOS WEIGT G I J M P C500BFG in. in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs IMPORTAT: Inquire with governing authorities for local installation requirements 9

32 SilverBullet Series 5000SS Reduced Pressure Detector Assemblies Sizes: 1 " " (5 150mm) The SilverBullet Series 5000SS Reduced Pressure Detector Assemblies are designed to protect drinking water supplies from dangerous crossconnections in accordance with national plumbing codes and water authority requirements for non-potable service applications such as irrigation, fireline, or industrial processing. Used in health hazard applications. Reduced Pressure Detector Assemblies Features Stainless steel construction provides long term corrosion resistance and maximum strength Stainless steel body is light weight reducing installation and shipping costs Short end to end dimensions makes retrofit easy Bottom mounted relief valve reduces clearance requirements when installed against an outside wall Cam-check valves provides maximum flow at low pressure drop o special tools required for servicing Compact construction allows for smaller enclosures Stainless steel relief valve features a balanced rolling diaphragm to eliminate sliding seals and lower maintenance costs Detects leaks and unauthorized water use. GPM or CFM meter available Materials All Internal Metal Parts: 300 Series stainless steel Main Valve Body: 300 Series stainless steel Check Assembly: oryl Flange dimension in accordance with AWWA Class D Pressure Temperature Temperature Range: 33 F 1 F (0.5 C 3 C) Maximum Working Pressure: 175 (.1 bar) Approvals 7 For additional approval information please contact the factory or visit our web site at Available Models Suffix: 5000SS LG without gate valves OSY outside stem and yoke resilient seated gate valves CFM cubic feet per minute meter GPM gallons per minute meter LM less meter *OSY FxG flanged inlet gate connection and grooved outlet gate connection *OSY GxF grooved inlet gate connection and flanged outlet gate connection *OSY GxG grooved inlet gate connection and grooved outlet gate connection Available with grooved RS gate valves - consult factory* Post indicator plate and operating nut available - consult factory* *Consult factory for dimensions OTICE The installation of a drain line is recommended. When installing a drain line, an air gap is necessary. Dimensions Weights G D L A C (open) oryl is a registered trademark of SABIC Innovative Plastics TM. F E SIZE (D) DIMESIOS (APPROX.) WEIGTS A C (OSY) D F G L E with Gates without Gates in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs For additional information, request literature ES-A-5000SS Flow Charts on p. 51

33 Series 00SS Detector Check Valves Sizes: " " (0 50mm) Features Lightest weight in the industry Designed to meet SF standards Check assemblies are based on popular modular design that has been proved in field use for over 15 years Lifting rings standard on " & " (00 & 50mm) devices for ease of installation o special tools required for servicing Optional bypass assembly available Approved for mounting in horizontal/vertical positions Custom tap sizes available upon request on-corrosive stainless steel construction Available Models Standard units come without bypass assembly. For models with bypass specify Suffix: CFM - cubic feet per minute meter GPM - gallons per minute meter LM - without meter 00SS DCV ", " LEAD FREE * Series 00SS Detector Check Valves detect any leakage or unauthorized use of water from fire or automatic sprinkler systems. The valve also isolates water from the public water mainline. During times of minimal water flow, the valve clapper remains closed so that the water flows through a bypass meter (optional). When fire flow is required, the water demand will open the clapper to all full water flow. Pressure Temperature Temperature Range: 33 F 1 F (0.5 C 3 C) Maximum Working Pressure: 175 (.1 bar) Approvals Flange bolt pattern and hole diameter in accordance with ASI B1.5 Class 5/AWWA C07 Class D Body nameplate provides nominal size, direction of flow, PSI rating, year of manufacture and approval marks Dimensions Weights 00SS DCV " & " C F D Listed 3 5 (" & " sizes only) E G 00SS DCV ", " Detector Check Valves 5 Materials Body: 300 Series stainless steel Knuckle Joint Assembly: Stainless steel linkage Cam-Check Assembly: Stainless steel linkage *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. A 00SS DCV " & " SIZE (D) DIMESIOS (APPROX.) WEIGT A B C D E F G Less Bypass w/bypass in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs. lbs. kgs PT PT PT PT IMPORTAT: Inquire with governing authorities for local installation requirements For additional information, request literature ES-A-00SS Flow Charts on p C F D A E G B B

34 Series 00DCV, 05DCV, DCV Detector Check Valves Sizes: " " (0 50mm) Series 00DCV Detector Check Valves detect any leakage or unauthorized use of water from fire or automatic sprinkler systems. Series 00DCV, 05DCV, DCV are designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements for non-potable service applications such as irrigation, fireline, or industrial processing. During times of minimal water flow, the valve clapper remains closed so that the water flows through a bypass meter (optional). When fire flow is required, the water demand will open the clapper to allow full water flow. 00DCV Features Fabricated steel body provides a much lighter weight unit than cast steel or ductile iron Approved for mounting in horizontal or vertical positions Prevents backflow from fire prevention systems Used to isolate fire systems from public main during pumper boost of fire system Ames-Guard epoxy coating is rust resistant and impervious to most chemicals DCV 5 Detector Check Valves Available Models Standard units come without bypass 00DCV "-" (0-50mm) 5# flanged end connections 05DCV "-" (0-150mm) 5# flanged x grooved end connections DCV "-" (0-150mm) grooved x grooved end connections For models with bypass specify suffix: CFM - cubic feet per minute meter GPM - gallons per minute meter LM - without meter Materials Body: Fabricated steel Knuckle Joint Assembly: Stainless steel linkage Seat: Bronze ASTM B3- Pressure Temperature Temperature Range: 33 F 1 F (0.5 C 3 C) Rated Working Pressure: 175 (.1 bar) Approvals Listed Flange bolt pattern and hole diameter in accordance with ASI B1.5 Class 5/AWWA C07 Class D Body nameplate provides nominal size, direction of flow, PSI rating, year of manufacture and approval marks For additional approval information please contact the factory or visit our web site at Dimensions Weights C F A D 05DCV E G B SIZE (D) DIMESIOS (APPROX.) WEIGT A B C D E F G in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kgs PT PT PT PT Consult factory for 05DCV and DCV dimensions. 3 For additional information, request literature ES-A-00DCV. Flow Charts on p. 5

35 In-Building Riser Building Floor Flow Building perimeter wall Flow The In-Building Riser is used to connect the main fire supply to LEAD FREE * the building overhead fire system. The fitting passes under the foundation without joints and extends up through the floor. Provided with installation tabs, the unit has a CIPS (Cast Iron Pipe Size) coupler for easy connection to the underground supply (AWWA C900 PVC) and (Ductile Iron Pipe) an industry standard grooved-end connection (AWWA C0) on the building side for easy connection to the overhead fire sprinkler system. Features Cost savings Corrosion resistant stainless steel construction, type 30 Ease of installation and lightweight allows one person to position and handle the riser Minimal site preparation; joint restraint one-piececonstruction reduces time and labor; no missing parts, no leaks; easily identifiable for approvals Includes test cap and coupler UL/FM approved Sizes: available in " " with various lengths to meet local requirements Designed to meet FPA Section -3. AWWA C900 Inlet DIP AWWA C0 Outlet Standards FPA Designed to allow the contractor to conform to FPA Section -3.: Where a riser is close to building foundations, underground fittings of proper design and type shall be used to avoid pipe joints being located under the foundations. FPA, 7.1.1,-3. *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. Approvals Fittings FM Class 190 UL KQA (" - ") Dimensions Weights B A Grooved End (Flange Optional) Tie-Rod Bracket C CIPS Coupling SIZE A (OD) B C WEIGT in. mm in. mm ft. mtr. ft. mtr. lbs. kgs Consult factory for custom leg dimensions Miscellaneous Products IMPORTAT: Inquire with governing authorities for local installation requirements For additional information, request literature S-A-InBuildingRiser. 33

36 Series 7001, 700 UL/FM Fire Service Strainers Sizes: 3" " (0 50mm) Series 7001, 700 UL/FM Fire Service Strainers are used in non-potable applications in conjunction with a water spray system to protect the system against clogging that can be caused by particles fouling the small discharge opening of the sprinkler heads. Strainers for fire systems are designed to trap foreign material 1 " diameter or larger. This type of strainer is usually installed upstream of most of the devices in the system including the meters, backflow preventers (or detector check valves) and flow alarms, in order to protect these devices from damage caused by large particles. Features Epoxy coated fabricated steel strainer, flange x flange, groove x groove or groove x flange with multiple cleanouts Large solids trap to minimize screen blockage 30 stainless steel strainer element 7001-One cleanout 700-Two cleanouts For additional information, request literature ES-A Miscellaneous Products Series 000F, 000G Stainless Steel Flanged and Grooved Strainers Sizes: 1 " " (5 300mm) Series 000F, 000G Stainless Steel LEAD FREE * Strainers are lightweight, fabricated wye-pattern strainers designed to remove dirt and other debris from fluid systems. A simple cover and coupling permits easy removal of dirt from the strainer s stainless steel screen, or replacement of the screen. The 000F and 000G feature Lead Free* construction to comply with Lead Free* installation requirements. Features 30 stainless steel body exhibits superior corrosion resistance compared to cast iron; eliminates casting porosity problems, complies with SF 1 and FDA requirements. 50% lighter than cast iron valves, reducing handling and installation equipment costs. Lead Free* construction Single, two-bolt, grooved style cover provides quick and easy access, saving disassembly assembly time. Screen retainer cover is tapped for strainer clean out by opening a blow-off valve, or the standardly furnished closure plug. 000G (Grooved) 000F (Flanged) *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. 3 For additional information, request literature ES-A-000F/000G.

37 Air Gaps & Vent Elbows 000B/LF000B Size: 1 " " (15-50mm) Air Gap 000SS Size: 1 " " (5-50mm) Air Gaps The Ames Air Gap Drain is designed to collect water that is being discharged by the relief valve, due to minor check valve fouling and/or to line pressure fluctuations. OTICE The Air Gap Drain is not designed to collect the full discharge capacity of the relief valve. 00/500 Air Gap 1 " " Splash Guard Vent Elbows Used with Ames air gaps for vertical installation of re duced pressure zone assemblies. A C B ORDERIG SIZES/SERIES DIMESIOS WEIGT CODE A B C in. mm in. mm in. mm lbs kgs ", 3 " 000B/LF000B ", 1 1 ", 1 1 " 000B/LF000B " 000B/LF000B " - " 000SS/5000SS " - " 001/ " - " 000CIV " - " 000SS vertical RP/5000RPDA (epoxy) " - " 00/500 w/splash Guard " - " 00/500 Splash Guard "-1" 00B AG "-" 00B AG SIZE SERIES Elbow Kits for 000B/LF000B Available for sizes 1 " " Stainless Steel Elbow Kits for and Z pattern valves Available for sizes 3", ", ", " Kits consist of: () Elbows, ut, Bolts, Gaskets and Ring gaskets. Cast Iron Elbow Kits - for pattern Colt & Maxim Series 00 & 300 Available for sizes 1 ", 3", ", ", ", " ** **Kits not available for Butterfly valve units Kits consist of: () grv x grv elbows and () Groove Couplers Cast Iron Elbow Kits - for and Z pattern Colt & Maxim Series 00 & 500 Available for sizes 1 ", 3", ", ", ", " ** **Kits not available for Butterfly Valve units Kits consist of: () grv x grv elbows and () Groove Couplers Miscellaneous Products IMPORTAT: Inquire with governing authorities for local installation requirements For additional information, request literature ES-A-AG/EL/TC

38 Test Cocks, Caps & Tethers Cap & Tethers Plastic cap and tether (four required per backflow preventer) Fits 1 " female test cocks Plastic dust cap and rubber tether ARK-TC/Ames - 1 " - 1 " (7017) SAE Brass Cap, O-ring and tether (four required per backflow preventer) Fits 1 " male x SAE test cocks Brass dust cap with O-ring seal and rubber tether ARK-SAE-TC/Ames (70179) Test Cocks For use with backflow preventers, isolation valve for gaug es, iso la tion valves for small equipment lines. Lead Free* models available. TC/Ames Full port ball valve design Screw driver slot to open and close Available 1 " male x 1 " female - 1 TC/Ames (701750) or 1 " male x 1 " female - 1 " LFTC/TC/Ames (0533) SAE-TC/Ames Full port ball valve design Screwdriver slot operation Available 1 " male x SAE - LFSAE TC/Ames (053) SAE-TC Adapter/Ames 1 " female SAE x 7 1" FPT Adapts to SAE-TC for use with pressure gauges or site tube SAE-TC Adapter/Ames (70177) 1 " TC Kit for Ames Colt/Maxim Series Fits 1 "-" Colt/Maxim Series Ordering Code: (70139)-not shown 3 " TC Kit for Ames Colt/Maxim Series Fits "-" Colt/Maxim Series Ordering Code: (701395)-not shown Test Kit Model ATG-1 Backflow Preventer Test Kit Miscellaneous Products The Ames ATG-1 Backflow Preventer Test Kit is a compact portable testing device made for testing all Reduced Pressure Zone Backflow Prevention Assemblies and Double Check Valve Assemblies. The ATG-1 is easily connected to any RPZ device enabling accurate testing of zone differential pressure, relief valve opening differential, fouled check valves or similar problems that visual inspections cannot locate. The unit is supplied with a rugged carrying case for easy handling and accessibility. Specifications Maximum Working Pressure 175 (.1 bar) Maximum Working Temperature F (99ºC) Gauge 1 " diameter face dual scale 0 15d and 0 1kg/cm, ±% accuracy full scale Test Valves () ball valves and (1) needle valve oses (3) 3' with female threaded swivel couplings Adaptors (3) 1 " threaded coupling adaptors (3) 1 " x 1 " bushings (3) 3 " x 1 " bushings 1 1" securing strap 1 Moisture resistant instruction guide Case lightweight, shock resistant molded plastic with foam inserts *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. 3 For additional information, request request literature literature IS-A-ATG-1. Flow Charts on p. xx

39 Spools and Flanges Spools For Retrofitting Backflow Preventers Spools Ames has created Make up Spools for use when LEAD FREE * retrofitting a backflow preventer into the longer lay length of an existing assembly. Ames spools are available in lightweight 300 series stainless steel or epoxy coated carbon steel and come standard with AWWA 150# class D carbon steel flanges. 150# class D stainless steel flanges available upon special request. The Ames spools feature Lead Free* construction to comply with Lead Free* installation requirements. Ames Make Up Flanges are used in piping applications where there is a need for additional fitting lay length. Ames flanges are available in AWWA 150# modified class D Zinc plated Carbon Steel Flanges with standard bolt pattern. 150# modified class D Zinc Plated Carbon Steel Flanges with standard pattern slotted. 150# modified class D Stainless Steel Flanges with standard bolt pattern. Contact factory for specific applications. Miscellaneous Products *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. For additional information, request literature ES-A-A-Spools/Flanges.. 37

40 Valve Setters AVS Valve Setter Assemblies Sizes: 3" " (75 50mm) MJxMJ FLxFL MJxFL Miscellaneous Products The Ames Series AVS valve setters are designed to augment the LEAD FREE * installation of the "" series backflow prevention valves. The Series AVS are available in three connection options, Flange by Flange, Mechanical Joint by Flange, and Mechanical Joint by Mechanical Joint. They are constructed of fusion epoxy coated ductile iron. Integral ductile iron support between elbows transfers thrust downstream, thus eliminating thrust block requirements between elbows. Mechanical joint restraint devices may be used at the pipe connections, depending on local conditions. Features Corrosion resistant fusion epoxy coated Eliminates the need for thrust blocks or other restraints at the point of installation Flanges: ASI B1.1 Class 5 (Standard) ASI AWWA C153 A1.53- Materials Body: Ductile iron A53 GR 5-5- Coating: Fusion epoxy coated internal and external AWWA C550 Bolts & uts: Stainless steel Pressure Temperature Maximum Working Pressure: 175 (.1 bar) Temperature Range: 3ºF to 10ºF (0ºC to 0ºC) Models FLxFL Flange by Flange MJxFL Mechanical Joint by Flange MJxMJ Mechanical Joint by Mechanical Joint ote: Mechanical joint accessories, flange bolts and gaskets are not included (except for center joints). *The wetted surface of this product contacted by consumable water contains less than 0.5% of lead by weight. IMPORTAT: Inquire with governing authorities for local installation requirements 3 For additional dimensions information, please request request literature literature ES-A-AVS. Flow Charts on p. xx

41 Series ASCV Anti-Siphon/Chemigation Check Valve Sizes: 3" " (0 300mm) " Vacuum Breaker Spring Swing Silent Check Valve Galvanized Steel Body Construction Flanged End Connections Lightweight Dependable Easy to Inspect on-slamming Economical ASCV 1 1 " Automatic Low Pressure Drain Streamlined bulged body allows unrestricted flow when valve is opened Series ASCV Anti-Siphon/Chemigation Check Valve is designed to protect drinking water supplies from dangerous cross-connections in accordance with national plumbing codes and water authority requirements for non-potable service applications such as irrigation, fireline, or industrial processing. The spring swing silent check valve is extremely efficient in the prevention of backflow to the water supply. Spring pressure is applied to the clapper causing it to close an instant before reverse flow starts. This instantaneous closure prevents water hammer and backflow into the water supply. Series ASCV vacuum breaker is installed on the top of the device on inlet side of check valve to provide air release and vacuum relief when flow discontinues. The vacuum breaker features a contoured machined seat for positive closure and large exhaust port and orifice for maximum air release. Series ASCV automatic low pressure drain is installed on bottom of device on inlet side of the check to provide drainage of any water on the inlet side of check valve. Drain closes at.5 (17. kpa). Features eavy duty galvanized steel body construction Prevents water hammer and backflow into the potable water supply (non-potable applications) Vacuum breaker provides maximum air release eavy duty cast aluminum vacuum breaker body Durable plastic low pressure drain body with positive O-ring seal, impervious to most chemicals Dimensions Weights D Miscellaneous Products Materials Valve Body: Galvanized steel Vacuum Breaker Body: Cast aluminum Low Pressure Drain: Plastic Pressure Maximum Working Pressure: 150 (.3 bar) IMPORTAT: Inquire with governing authorities for local installation requirements For additional information, request literature ES-A-ASCV Flow Charts on p E SIZE (D) DIMESIOS (APPROX.) WEIGT D E in. mm in. mm in. mm lbs. kgs