Technical Data. Air Cleaner Dry type, 2 stage, Evacuator valve Pre-cleaner, optional

Transcription

1 Timberjack Cable Skidder Technical Data Engine Cummins 4BTA Cylinders 4 Displacement litres 3.9 cu.in. 239 Maximum power* kw 87 hp 116 Flywheel power* kw 75 hp 102 Maximum torque* Nm 400 lb.-ft. 297 Governed rpm 2200 *Engine performance per SAE test criteria/conditions Air Cleaner Dry type, 2 stage, Evacuator valve Pre-cleaner, optional Cooling System 8 row, inline, 3 pass radiator Fan side has steel reinforced copper fins System pressure 103 kpa (15 psi) Steel surge tank Fan Blower type,10 Blade Engine Lubrication Full pressure lubrication Coolant to oil type oil cooler Spin on type engine oil filter, vertically mounted Electrical System 12 volt 105 amp alternator Batteries - 2 x12 volt, 750 CCA 180 ah each Electrical cut-off in cab Fuel System Fuel capacity litres (30 usg) Water separator standard Transmission Standard Shift 4 speeds Stick shift control Transfer Case Timberjack designed and built 2 speed reversing Manual lever/cable operated from cab

2 Axles Heavy duty outboard planetary type Front - NoSpin auto engagement Rear - lockable differential Steering Frame articulation +/- 45 degrees Oscillation Front axle +/- 15 degrees Service Brakes Enclosed dry disc, hydraulic/mechanical Actuation, mounted on transfer case Parking Brake Lever control/cable actuation of service brake Travel speeds (Based on standard tires) Maximum speeds kph / mph kph / mph 1 F 3.0 / R 3.0 / F 5.2 / R 5.2 / F 8.6 / R 8.6 / F 12.8 / R 12.8 / 7.97 T40D Winch Rated Brake Capacity kn (40,000 lbs.) Rated Line Pull Bare drum 125 kn (28,067 lbs.) Full drum 91 kn (20,583 lbs.) Line speed Bare drum 0-46 m/min (0-153 ft./min) Full drum 0-63 m/min (0-209 ft./min) Drum Diameter mm (8 in.) Cable Diameter - 16 mm (5/8 in.); 19 mm (3/4 in.) Drum Capacity - 77m (254 ft.); 54m (179 ft.) Fairlead Assembly Fairlead roller type - Concave shape, induction hardened Diameter Length mm/inch mm/inch 168 / / 11.2 Vertical rollers 95 / / 17.5 Horizontal rollers 95 / / 17.5 Hydraulic System Pump Main pump - open center, constant displacement, gear type Flow 100 lpm (25.1 gpm) Pressure Pa (2,500 psi) Auxilliary pump - open center, gear type Flow 32.4 lpm (8.1 gpm) Pressure Pa (250 psi) Hydraulic tank Capacity 34 litres (7.5 usg) Pressure 105 kpa (15 psi) Filter - In tank return filter, bypass type Hydraulic Cylinders Bore Rod dia. Stroke mm/inches Steer (1) Double acting Decking Blade (2) Double acting Machine Weight Based on Standard Machine Configuration, as follows: tires 86" Decking blade Open cab All tanks filled, plus T40D Winch 90Kg (200lb.) operator Weight distribution Front axle Rear axle Total Kg lbs. 10,755 7,745 18,500 % Fenders Integral with rear chassis weldment Heavy duty, rolled design Designed to provide protection for tires

3 A = mm (102") B = mm (79") C = mm (96") D= +/- 45 E = mm (65") F = 832 mm (33") H = 726 mm (29") J 1 = mm (46") J 2 = mm (58") K = 848 mm (33") L = mm (115") M = mm (67") N = mm (118") O = mm (117") P = mm (207") Q = mm (140") R = mm (230") S 1 = 406 mm (16") S 2 = 517 mm (20") T = 343 mm (14") X = mm (226") Y = 178 mm (7") Z = 565 mm (22") Tire Size L L-32 67/ A mm (98") mm (110") mm (112") mm (119") mm (126") B mm (80") mm (82") mm (87") mm (88") mm (93") L mm (117") mm (115") mm (118") mm (119") mm (116") Z 615 mm (24") 579 mm (23") 638 mm (25") 681 mm (27") 607 mm (24") Note: Machine height is approximate. Tire dimensions may vary +/- 50 mm (2"). Dimensions A through Z are based on Tires.

4 Standard and Optional Equipment Engine Air filter, dry type, two stage with vacuator valve Air intake precleaner Antifreeze-33F (-36C) Blower type cooling fan Coolant Recovery tank Electric Fuel Shutoff, key activated Fuel filters, primary/secondary, spin on type Fuel/water separator, with drain Iso-mounted engine/transmission assemblies Muffler/spark arrestor Oil drain with "Enviro-rite" drain system Oil filter, spin on, vertical mount Oil to coolant type engine oil cooler Padlock ready side panels Electrical Alternator, 12 volt, 105 amperes Batteries, dual, 750 CCA each, 185 ah reserve each Electric shut off master switch, cab mounted Electric engine block heater Electric engine oil pan heater Lights, none Lights, 3 front, 2 rear Transmission Manual Shift 4 speeds synchronized Axles Heavy duty outboard planetary type Front - NoSpin-auto engagement Rear - Lockable Differential Brakes Service brakes Single disc type, transfer case mounted Fully enclosed Parking brake, cable actuated/manually Standard Optional

5 Standard and Optional Equipment Cab - Standard Fully screened Cab* Tinted Lexan Front Window Washer/Wiper Integral cab with ROPS, OPS, FOPS rating * (except for front window) Front washer/wiper Right half door, opening Adjustable seat with seat belt Dash mounted ignition switch Master Cut off switch, dash mounted Foot operated throttle Foot operated brake Parking brake 5 lb. Fire extinguisher 10 lb. Fire extinguisher Instrumentation Full gauge/warning package as follows: Engine Hourmeter Meter Engine oil pressure Gauge Engine coolant temperature Gauge Charging system VOH meter Parking brake Light Diff lock on/off Light Back-up alarm Cab - Optional Enclosed, including the following: Integral cab with ROPS, OPS, FOPS rating Tinted Lexan windows Left opening door, with sliding windows Heater Standard Optional

6 Tire Chart Timberjack and the donkey symbol are trade marks of Timberjack. Printed in Canada by BP-10M-2/00 The manufacturer reserves the right to make changes or add improvements at any time without incurring any obligation to make such changes on machines manufacturered previously. Tire Size Overall Ground Ground Width Clearance Pressure mm / Inch mm / Inch Front kpa/psi Rear kpa/psi / / * /7.2 (narrow track) / /7.2 (wide track) /5.2 28L /6.0 (narrow track) /4.4 28L /6.0 (wide track) / / / L-32** / /4.1 67x ** / /4.1 * Standard tire ** Not approved with tire chains All dimensions based on unit equipped with Heavy Duty 84" axles. Based on standard equipped machine Narrow track/wide track dimensions refer to reversible rim feature. Footprints or tire contact area from manufacturer's data, at 76 mm (3") penetration.