5533 University Avenue-Legal Description

Transcription

1

2

3 5533 University Avenue-Legal Description STOEBER ADDITION, LOTS AND 2 AND PRT OF LOT 3 DESC AS FOL, BEG AT S COR LOT 2, TH NLY 50 FT TO W COR LOT 2, TH N 22 DEG 7 MIN W 0.53 FT, TH S 49 DEG 29 MIN W FT, TH S 40 DEG 3 MIN E 60 FT TO S LN LOT 3, TH E 25 FT ALG SD LN TO POB, EXC THAT PART DESC AS FOL COM ELY COR OF SD LOT TH N 40 DEG 3 MIN 00 SEC W FT TO POB, TH N 48 DEG 4 MIN 8 SEC W FT TO PT OF CONCAVE CUR, RAD 5 FT, CHRD BRS N 85 DEG 4 MIN 0 SEC W 8.24 FT, TH S 56 DEG 5 MIN 59 SEC W 4.72 FT TO PT OF CONCAVE CUR TO NW, RAD FT, CHRD BRS N 5 DEG 08 MIN 45 SEC E 5.90 FT TO PT OF CONCAVE CUR TO S, RAD 5.05 FT, CHRD BRS S 85 DEG 0 MIN 52 SEC E 2.0 FT, TH S 40 DEG 3 MIN 00 SEC E 22.6 FT TO POB.

4 September, 207 Mark Clear Alderperson District #9 0 Shiloh Dr. Madison, WI Re: 5533 University Avenue KBA Project No: 735 Dear Alder Clear, On behalf of Jerry Connery and Knothe & Bruce Architects, I would like to take this opportunity to formally notify you that we plan on submitting our application for a mixed-use development at 5533 University Avenue. We look forward to working with you to design a successful development for this property. If you have any questions, please contact me at or rbruce@knothebruce.com. Sincerely, J. Randy Bruce, AIA Managing Member Cc: Aaron Crandall, 54 Flambeau Rd, Madison, WI Spring Harbor Neighborhood Association

5 October 4, 207 Ms. Heather Stouder Department of Planning & Development City of Madison 46 S. Hamilton Street P.O. Box 2985 Madison, Wisconsin 5370 Re: Letter of Intent 5533 University Avenue KBA Project # 735 Ms. Heather Stouder: The following is submitted together with the plans and application for the staff and Plan Commission s consideration of approval. Organizational Structure: Owner: Realm Real Estate Development LLC 320 Edmonton Drive, Suite 300 Sun Prairie, WI Contact: Martin O Connor marty@homeagainliving.com Architect: Knothe & Bruce Architects, LLC 760 University Avenue, Ste 20 Middleton, WI Contact: Randy Bruce rbruce@knothebruce.com Engineer: Snyder & Associates, Inc. 500 Voges Rd Madison, WI 5378 (608) Contact: Mike Calkins mcalkins@snyder-associates.com Landscape Nelson Landscaping, Inc. Design: P.O. Box 823 Waukesha, WI 5387 (608) Contact: xxxx xxx@nelsonlandscape.com Introduction: The site is located at the southeast corner of University Avenue and Capitol Street and is currently zoned Neighborhood Mixed-Use District. The site is currently occupied by a -story retail business that served as the former Brennan s Market. This proposal requests a conditional use approval for a mixeduse development with commercial uses on the first floor and three levels of housing above the commercial. A Certified Survey Map will be submitted in two weeks to combine the underlying parcels into one lot. Project Description: This proposed project is a mixed-use development consisting of approximately 8,00 square feet of retail space and 52 apartments with vehicle parking located primarily below the building in two levels; at the grade and basement levels. The building is broken into two modules that are linked on the upper floors and horizontally break up the massing of the building. Along University Avenue, a generous set back is provided to allow for a landscape buffer and the building is stepped back above the third floor to reduce the perceived height. The building also has significant setbacks on the side and rear lot lines allowing for landscaping and solar access to neighboring properties.

6 Letter of Intent 5533 University Ave. October 4, 207 Page 2 of 3 The applicant has worked with the City Traffic Engineering department on vehicular access. The site will have ingress and egress from Capitol Avenue. The vehicular access on University Avenue allows for ingress at the eastern end of the site and egress at the center of the site allowing for a potential vehicular access service window. The service access window will be integrated into the building and located below the linkage that separates the two building modules. The exterior architecture is a clean urban architecture. On the street and eastern facades the major material is brick masonry accented with fiber-cement siding. Towards the rear of the building the material palette uses a higher amount of fiber-cement siding consistent with the transition to the residential uses to the south. Spring Harbor Neighborhood Plan and UDD #6 This project is consistent with the goals and guidelines of both the Spring Harbor Neighborhood Plan and the UDD #6 Guidelines. The SHNP calls for attractive mixed-use development at specified redevelopment sites including the Brennan s Market site. In addition, the plan calls for pedestrianoriented and transit-oriented development to occur; both of which are met with the proposed plan. The commercial uses face the two streets and have direct pedestrian access and a Madison Metro bus stop is located at the street intersection. UDD # 6 generally refers to the SHNP but specifically calls for a minimum and maximum building height of three to four stories with parking areas located to the rear of the site. Site Development Data: Densities: Lot Area Dwelling Units Lot Area / D.U. Density Commercial Area (approx.) Building Height 48,57 sf /. Acres 52 DU 933 sf / unit 47 units/acre 8,00 sf 4 stories Lot Coverage 33,923 S.F. = 70% Usable Open Space,424 S.F. (220 sf / D.U. or 80 sf / Bedroom) Dwelling Unit Mix: Efficiency 3 One Bedroom 24 One Bedroom + Den 3 Two Bedroom 2 Total Dwelling Units 52 Vehicle Parking: Surface Underground Total 38 stalls 5 stalls 89 stalls Bicycle Parking:

7 Letter of Intent 5533 University Ave. October 4, 207 Page 3 of 3 Surface Commercial Surface Guest Underground Garage Wall Hung Underground Garage STD. 2 x6 Total 3 stalls 5 stalls (0% of units) 2 stalls (covered) 40 stalls (covered) 60 stalls Project Schedule: It is anticipated that the construction on this site will start in June, 208 with a final completion date of June, 209. Thank you for your time reviewing our proposal. Sincerely, Randy Bruce, AIA

8 L H D-Series Size LED Area Luminaire Catalog Number Notes Type Hit the Tab key or mouse over the page to see all interactive elements. Specifications EPA:.0 ft 2 (0.09 m 2 ) Length: 33 (83.8 cm) Width: 3 (33.0 cm) Height: 7-/2 (9.0 cm) Weight (max): 27 lbs (2.2 kg) A+ Capable options indicated by this color background. L W H Capable Luminaire This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and system-level interoperability. All configurations of this luminaire meet the Acuity Brands specification for chromatic consistency This luminaire is A+ Certified when ordered with DTL controls marked by a shaded background. DTL DLL equipped luminaires meet the A+ specification for luminaire to photocontrol interoperability This luminaire is part of an A+ Certified solution for ROAM or XPoint Wireless control networks, providing out-of-the-box control compatibility with simple commissioning, when ordered with drivers and control options marked by a shaded background To learn more about A+, visit See ordering tree for details. 2. A+ Certified Solutions for ROAM require the order of one ROAM node per luminaire. Sold Separately: Link to Roam; Link to DTL DLL Ordering Information EXAMPLE: DSX LED P7 40K T3M MVOLT SPA DDBXD DSXLED Series LEDs Color temperature Distribution Voltage Mounting DSX LED Forward optics P P4 P7 P2 P5 P8 P3 P6 P9 Rotated optics P0 P2 P P3 30K 40K 50K AMBPC 3000 K 4000 K 5000 K Amber phosphor converted 2 TS T2S T2M T3S T3M T4M TFTM T5VS Type I short Type II short Type II medium Type III short Type III medium Type IV medium Forward throw medium Type V very short T5S T5M T5W BLC LCCO RCCO Type V short Type V medium Type V wide Backlight control 2,3 Left corner cutoff 2,3 Right corner cutoff 2,3 MVOLT , ,6 Shipped included SPA Square pole mounting RPA Round pole mounting WBA Wall bracket SPUMBA Square pole universal mounting adaptor 7 RPUMBA Round pole universal mounting adaptor 7 Shipped separately KMA8 DDBXD U Mast arm mounting bracket adaptor (specify finish) 8 Control options Other options Finish (required) Shipped installed PER NEMA twist-lock receptacle only (controls ordered separate) 9 PER5 Five-wire receptacle only (controls ordered separate) 9,0 PER7 Seven-wire receptacle only (controls ordered separate) 9,0 DMG 0-0V dimming extend out back of honsing for external control (leads exit fixture) DS Dual switching,2 PIR Bi-level, motion/ambient sensor, 8-5 mounting height, ambient sensor enabled at 5fc 3,4 PIRH Bi-level, motion/ambient sensor, 5-30 mounting height, ambient sensor enabled at 5fc 3,4 PIRFC3V Bi-level, motion/ambient sensor, 8-5 mounting height, ambient sensor enabled at fc 3,4 PIRHFC3V Bi-level, motion/ambient sensor, 5-30 mounting height, ambient sensor enabled at fc 3,4 BL30 Bi-level switched dimming, 30% 2,5 BL50 Bi-level switched dimming, 50% 2,5 PNMTDD3 Part night, dim till dawn 6 PNMT5D3 Part night, dim 5 hrs 6 PNMT6D3 Part night, dim 6 hrs 6 PNMT7D3 Part night, dim 7 hrs 6 FAO Field adjustable output 7 Shipped installed HS House-side shield 8 SF Single fuse (20, 277, 347V) 5 DF Double fuse (208, 240, 480V) 5 L90 Left rotated optics R90 Right rotated optics BS Bird spikes EGS External glare shield DDBXD DBLXD DNAXD DWHXD DDBTXD DBLBXD DNATXD DWHGXD Dark bronze Black Natural aluminum White Textured dark bronze Textured black Textured natural aluminum Textured white One Lithonia Way Conyers, Georgia 3002 Phone: Acuity Brands Lighting, Inc. All rights reserved. DSX-LED Rev. 09/25/7 Page of 7

9 Ordering Information Accessories Ordered and shipped separately. DLL27F.5 JU Photocell - SSL twist-lock (20-277V) 22 DLL347F.5 CUL JU Photocell - SSL twist-lock (347V) 22 DLL480F.5 CUL JU Photocell - SSL twist-lock (480V) 22 DSHORT SBK U Shorting cap 22 DSXHS 30C U House-side shield for 30 LED unit 8 DSXHS 40C U House-side shield for 40 LED unit 8 DSXHS 60C U House-side shield for 60 LED unit 8 PUMBA DDBXD U* KMA8 DDBXD U Square and round pole universal mounting bracket (specify finish) 23 Mast arm mounting bracket adaptor (specify finish) 7 For more control options, visit DTL and ROAM online. NOTES P0, P, P2 or P3 and rotated optics (L90, R90) only available together. 2 AMBPC is not available with BLC, LCCO, RCCO or P4, P7, P8, P9 or P3. 3 Not available with HS. 4 MVOLT driver operates on any line voltage from V (50/60 Hz). 5 Single fuse (SF) requires 20V, 277V or 347V. Double fuse (DF) requires 208V, 240V or 480V. 6 Not available in P or P0. Not available with BL30, BL50 or PNMT options. 7 Existing drilled pole only. Available as a separate combination accessory; for retrofit use only: PUMBA (finish) U;.5 G vibration load rating per ANCI C Must order fixture with SPA option. Must be ordered as a separate accessory; see Accessories information. For use with 2-3/8 mast arm (not included). 9 Photocell ordered and shipped as a separate line item from Acuity Brands Controls. See accessories. Not available with DS option. Shorting cap included. 0 If ROAM node required, it must be ordered and shipped as a separate line item from Acuity Brands Controls. Not available with DCR. Node with integral dimming. Shorting cap included. Provides 50/50fixture operation via (2) independent drivers. Not available with PER, PER5, PER7, PIR or PIRH. Not available P, P2, P3 or P4. 2 Requires (2) separately switched circuits. 3 Reference Motion Sensor table on page 3. 4 Reference PER table on page 3 to see functionality. 5 Not available with 347V, 480V, PNMT, DS. For PER5 or PER7, see PER Table on page 3. 6 Not available with 347V, 480V, DS, BL30, BL50. For PER5 or PER7, see PER Table on page 3. Separate Dusk to Dawn required. 7 Not available with other dimming controls options 8 Not available with BLC, LCCO and RCCO distribution. Also available as a separate accessory; see Accessories information. 9 Requires luminaire to be specified with PER, PER5 or PER7 option. See PER Table on page For retrofit use only. External Glare Shield Drilling HANDHOLE ORIENTATION C Tenon Mounting Slipfitter ** Tenon O.D. Single Unit 2 at 80 2 at 90 3 at 20 3 at 90 4 at /8 AST20-90 AST AST AST AST AST /8 AST25-90 AST AST AST AST AST AST35-90 AST AST AST AST AST D B Pole drilling nomenclature: # of heads at degree from handhole (default side A) DM9AS DM28AS DM29AS DM32AS DM39AS DM49AS A Side B Side B & D Side B & C Round pole only Side B, C, & D Sides A, B, C, D Note: Review luminaire spec sheet for specific nomenclature Template # Top of Pole (2 PLCS) Pole top or tenon O.D DSX SPA Y Y Y N DSX RPA Y Y N N Y Y Y Y DSX SPUMBA Y N N N DSX RPUMBA N N N N Y Y Y N *3 require round pole top/tenon. Photometric Diagrams To see complete photometric reports or download.ies files for this product, visit Lithonia Lighting s D-Series Area Size homepage. Isofootcandle plots for the DSX LED 60C K. Distances are in units of mounting height (25 ). LEGEND 0. fc 0.5 fc.0 fc Test No. LTL232 tested in accordance with IESNA LM Test No. LTL2364B tested in accordance with IESNA LM TS T3M T4M T5W Test No. LTL23222 tested in accordance with IESNA LM Test No. LTL2327 tested in accordance with IESNA LM One Lithonia Way Conyers, Georgia 3002 Phone: Acuity Brands Lighting, Inc. All rights reserved. DSX-LED Rev. 09/25/7 Page 2 of 7

10 Performance Data Lumen Ambient Temperature (LAT) Multipliers Use these factors to determine relative lumen output for average ambient temperatures from 0-40 C (32-04 F). Ambient Lumen Multiplier 0 C 32 F.04 5 C 4 F.04 0 C 50 F.03 5 C 50 F C 68 F.0 25 C 77 F C 86 F 9 35 C 95 F 8 40 C 04 F 7 Projected LED Lumen Maintenance Data references the extrapolated performance projections for the platforms noted in a 25 C ambient, based on 0,000 hours of LED testing (tested per IESNA LM and projected per IESNA TM-2-). To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory. Operating Hours Lumen Maintenance Factor Electrical Load Forward Optics (Non-Rotated) Rotated Optics (Requires L90 or R90) Performance Package LED Count Drive Current Current (A) Wattage P P P P P P P P P P P P P Option Dimmed State Motion Sensor Default Settings High Level (when triggered) Phototcell Operation Dwell Time Ramp-up Time Ramp-down Time PIR or PIRH 3V (37%) Output 0V (00%) Output 5FC 5 min 3 sec 5 min *PIRFC3V or PIRHFC3V 3V (37%) Output 0V (00%) Output FC 5 min 3 sec 5 min *for use with Inline Dusk to Dawn or timer. Control PER (3 wire) Photocontrol Only (On/Off) ROAM ROAM with Motion (ROAM on/off only) Future-proof* Future-proof* with Motion Recommended Will not work Alternate *Future-proof means: Ability to change controls in the future. PER Table PER5 (5 wire) PER7 (7 wire) Wire 4/Wire5 Wire 4/Wire5 Wire 6/Wire7 Wired to dimming Wired to dimming Wires Capped inside leads on driver leads on driver fixture Wired to dimming Wired to dimming Wires Capped inside leads on driver leads on driver fixture Wires Capped inside Wires Capped inside Wires Capped inside fixture fixture fixture Wired to dimming Wired to dimming Wires Capped inside leads on driver leads on driver fixture Wires Capped inside Wires Capped inside Wires Capped inside fixture fixture fixture One Lithonia Way Conyers, Georgia 3002 Phone: Acuity Brands Lighting, Inc. All rights reserved. DSX-LED Rev. 09/25/7 Page 3 of 7

11 Performance Data Lumen Output Lumen values are from photometric tests performed in accordance with IESNA LM Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Contact factory for performance data on any configurations not shown here. Forward Optics LED Count Drive Current Power Package System Watts P 54W P2 70W P3 02W P4 25W P5 38W 30K 40K 50K AMBPC Dist. (3000 K, 70 CRI) (4000 K, 70 CRI) (5000 K, 70 CRI) (Amber Phosphor Converted) Type Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW TS 6, , , , T2S 6, , , , T2M 6, , , , T3S 6, , , , T3M 6, , , , T4M 6, , , , TFTM 6, , , , T5VS 6, , , , T5S 6, , , , T5M 6, , , , T5W 6, , , , BLC 5, , , LCCO 3, , , RCCO 3, , , TS 8, , , , T2S 8, , , , T2M 8, , , , T3S 8, , , , T3M 8, , , , T4M 8, , , , TFTM 8, , , , T5VS 8, , , , T5S 8, , , , T5M 8, , , , T5W 8, , , , BLC 6, , , LCCO 5, , , RCCO 5, , , TS, , , T2S, , , T2M, , , T3S, , , T3M, , , T4M, , , TFTM, , , T5VS 2, , , T5S 2, , , T5M 2, , , T5W 2, , , BLC 9, , , LCCO 7, , , RCCO 7, , , TS 3, , , T2S 3, , , T2M 3, , , T3S 3, , , T3M 3, , , T4M 3, , , TFTM 3, , , T5VS 3, , , T5S 3, , , T5M 3, , , T5W 3, , , BLC, , , LCCO 8, , , RCCO 8, , , TS 4, , , T2S 4, , , T2M 4, , , T3S 4, , , T3M 4, , , T4M 4, , , TFTM 4, , , T5VS 5, , , T5S 5, , , T5M 5, , , T5W 5, , , BLC 2, , , LCCO 8, , , , , , One Lithonia Way Conyers, Georgia 3002 Phone: Acuity Brands Lighting, Inc. All rights reserved. DSX-LED Rev. 09/25/7 Page 4 of 7

12 Performance Data Lumen Output Lumen values are from photometric tests performed in accordance with IESNA LM Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Contact factory for performance data on any configurations not shown here. Forward Optics LED Count Drive Current Power Package System Watts P6 63W P7 83W P8 207W P9 24W Dist. Type 30K (3000 K, 70 CRI) 40K (4000 K, 70 CRI) 50K (5000 K, 70 CRI) Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW TS 7, , , T2S 7, , , T2M 7, , , T3S 7, , , T3M 7, , , T4M 7, , , TFTM 7, , , T5VS 8, , , T5S 8, , , T5M 8, , , T5W 8, , , BLC 4, , , LCCO 0, , , RCCO 0, , , TS 9, , , T2S 9, , , T2M 9, , , T3S 8, , , T3M 9, , , T4M 8, , , TFTM 9, , , T5VS 20, , , T5S 20, , , T5M 9, , , T5W 9, , , BLC 5, , , LCCO, , , RCCO, , , TS 22, , , T2S 22, , , T2M 22, , , T3S 2, , , T3M 22, , , T4M 22, , , TFTM 22, , , T5VS 23, , , T5S 23, , , T5M 23, , , T5W 23, , , BLC 8, , , LCCO 3, , , RCCO 3, , , TS 25, , , T2S 25, , , T2M 25, , , T3S 24, , , T3M 25, , , T4M 25, , , TFTM 25, , , T5VS 26, , , T5S 26, , , T5M 26, , , T5W 26, , , BLC 20, , , LCCO 5, , , , , , AMBPC (Amber Phosphor Converted) Lumens B U G LPW One Lithonia Way Conyers, Georgia 3002 Phone: Acuity Brands Lighting, Inc. All rights reserved. DSX-LED Rev. 09/25/7 Page 5 of 7

13 Performance Data Lumen Output Lumen values are from photometric tests performed in accordance with IESNA LM Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Contact factory for performance data on any configurations not shown here. Rotated Optics LED Count Drive Current Power Package System Watts P0 06W P 37W P2 207W P3 23W 30K 40K 50K AMBPC Dist. (3000 K, 70 CRI) (4000 K, 70 CRI) (5000 K, 70 CRI) (Amber Phosphor Converted) Type Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW TS 3, , , , T2S 2, , , , T2M 3, , , , T3S 2, , , , T3M 3, , , , T4M 2, , , , TFTM 3, , , , T5VS 3, , , , T5S 3, , , , T5M 3, , , , T5W 3, , , , BLC 0, , , LCCO 7, , , RCCO 7, , , TS 6, , , , T2S 6, , , , T2M 6, , , , T3S 6, , , , T3M 6, , , , T4M 6, , , , TFTM 6, , , , T5VS 6, , , , T5S 6, , , , T5M 6, , , , T5W 6, , , , BLC 3, , , LCCO 9, , , RCCO 9, , , TS 22, , , T2S 22, , , T2M 23, , , T3S 22, , , T3M 23, , , T4M 22, , , TFTM 23, , , T5VS 23, , , T5S 23, , , T5M 23, , , T5W 23, , , BLC 9, , , LCCO 3, , , RCCO 3, , , TS 25, , , T2S 25, , , T2M 25, , , T3S 24, , , T3M 25, , , T4M 25, , , TFTM 25, , , T5VS 26, , , T5S 25, , , T5M 25, , , T5W 25, , , BLC 2, , , LCCO 5, , , , , , One Lithonia Way Conyers, Georgia 3002 Phone: Acuity Brands Lighting, Inc. All rights reserved. DSX-LED Rev. 09/25/7 Page 6 of 7

14 FEATURES & SPECIFICATIONS INTENDED USE The sleek design of the D-Series Size reflects the embedded high performance LED technology. It is ideal for many commercial and municipal applications, such as parking lots, plazas, campuses, and streetscapes. CONSTRUCTION Single-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. Modular design allows for ease of maintenance and future light engine upgrades. The LED drivers are mounted in direct contact with the casting to promote low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP65). Low EPA (.0 ft 2 ) for optimized pole wind loading. FINISH Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Available in both textured and non-textured finishes. OPTICS Precision-molded proprietary acrylic lenses are engineered for superior area lighting distribution, uniformity, and pole spacing. Light engines are available in standard 3000 K, 4000 K and 5000 K (70 CRI) configurations. The D-Series Size has zero uplight and qualifies as a Nighttime Friendly TM product, meaning it is consistent with the LEED and Green Globes TM criteria for eliminating wasteful uplight. ELECTRICAL Light engine configurations consist of high-efficacy LEDs mounted to metal-core circuit boards to maximize heat dissipation and promote long life (up to L85/00,000 hours at 25 C). Class electronic drivers are designed to have a power factor >90%, THD <20%, and an expected life of 00,000 hours with <% failure rate. Easily serviceable 0kV surge protection device meets a minimum Category C Low operation (per ANSI/IEEE C62.4.2). INSTALLATION Included mounting block and integral arm facilitate quick and easy installation. Stainless steel bolts fasten the mounting block securely to poles and walls, enabling the D-Series Size to withstand up to a 3.0 G vibration load rating per ANSI C36.3. The D-Series Size utilizes the AERIS TM series pole drilling pattern (template #8). Optional terminal block and NEMA photocontrol receptacle are also available. LISTINGS UL Listed for wet locations. Light engines are IP66 rated; luminaire is IP65 rated. Rated for -40 C minimum ambient. U.S. Patent No. D672,492 S. International patent pending. WARRANTY 5-year limited warranty. Complete warranty terms located at Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 C. Specifications subject to change without notice. One Lithonia Way Conyers, Georgia 3002 Phone: Acuity Brands Lighting, Inc. All rights reserved. DSX-LED Rev. 09/25/7 Page 7 of 7

15 6-3/8 4 FOR 3/4" NPT 3-3/4 6-3/8 D-Series Size LED Wall Luminaire Catalog Number Notes Type Hit the Tab key or mouse over the page to see all interactive elements. Introduction Specifications Luminaire Width: 3-3/4 (34.9 cm) Depth: 0 (25.4 cm) Height: 6-3/8 (6.2 cm) W Weight: D 2 lbs (5.4 kg) H Back Box (BBW, ELCW) Width: 3-3/4 (34.9 cm) Depth: 4 (0.2 cm) Height: 6-3/8 (6.2 cm) H D BBW Weight: ELCW Weight: W For 3/4 NPT side-entry conduit (BBW only) 5 lbs (2.3 kg) 0 lbs (4.5 kg) The D-Series Wall luminaire is a stylish, fully integrated LED solution for building-mount applications. It features a sleek, modern design and is carefully engineered to provide long-lasting, energy-efficient lighting with a variety of optical and control options for customized performance. With an expected service life of over 20 years of nighttime use and up to 74% in energy savings over comparable 250W metal halide luminaires, the D-Series Wall is a reliable, low-maintenance lighting solution that produces sites that are exceptionally illuminated. Ordering Information EXAMPLE: DSXW LED 20C K T3M MVOLT DDBTXD DSXW LED Series LEDs Drive Current Color temperature Distribution Voltage Mounting Control Options DSXW LED 0C 0 LEDs (one engine) 20C 20 LEDs (two engines) ma ma ma ma ( A) 30K 40K 50K AMBPC 3000 K 4000 K 5000 K Amber phosphor converted T2S Type II Short T2M Type II Medium T3S Type III Short T3M Type III Medium T4M Type IV Medium TFTM Forward Throw Medium ASYDF Asymmetric diffuse MVOLT Shipped included (blank) Surface mounting bracket BBW Surfacemounted back box (for conduit entry) 3 Shipped installed PE Photoelectric cell, button type 4 DMG 0-0V dimming driver (no controls) PIR 80 motion/ambient light sensor, <5 mtg ht 5 PIRH 80 motion/ambient light sensor, 5-30 mtg ht 5 PIRFC3V Motion/ambient sensor, 8-5' mounting height, ambient sensor enabled at fc 5 PIRHFC3V Motion/ambient sensor, 5-30' mounting height, ambient sensor enabled at fc 5 ELCW Emergency battery backup (includes external component enclosure) 6 Other Options Finish (required) Shipped installed Shipped separately 8 SF Single fuse (20, 277 or 347V) 7 BSW Bird-deterrent spikes DF Double fuse (208, 240 or 480V) 7 WG Wire guard HS House-side shield 8 VG Vandal guard SPD Separate surge protection 9 DDL Diffused drop lens DDBXD Dark bronze DSSXD Sandstone DWHGXD Textured white DBLXD Black DDBTXD Textured dark bronze DSSTXD Textured sandstone DNAXD Natural aluminum DBLBXD Textured black DWHXD White DNATXD Textured natural aluminum Accessories Ordered and shipped separately. DSXWHS U DSXWBSW U DSXWWG U DSXWVG U House-side shield (one per light engine) Bird-deterrent spikes Wire guard accessory Vandal guard accessory NOTES MVOLT driver operates on any line voltage from V (50/60 Hz). Specify 20, 208, 240 or 277 options only when ordering with fusing (SF, DF options), or photocontrol (PE option). 2 Only available with 20C, 700mA or 000mA. Not available with PIR or PIRH. 3 Back box ships installed on fixture. Cannot be field installed. Cannot be ordered as an accessory. 4 Photocontrol (PE) requires 20, 208, 240, 277 or 347 voltage option. Not available with motion/ambient light sensors (PIR or PIRH). 5 PIR and PIRFC3V specifies the Sensor Switch SBGR-0-ODP control; PIRH specifies the Sensor Switch SBGR-6-ODP control; see Motion Sensor Guide for details. Includes ambient light sensor. Not available with PE option (button type photocell). Dimming driver standard. Not available with 20 LED/000 ma configuration (DSXW LED 20C 000). 6 Cold weather (-20C) rated. Not compatible with conduit entry applications. Not available with BBW mounting option. Not available with fusing. Not available with 347 or 480 voltage options. Emergency components located in back box housing. Emergency mode IES files located on product page at 7 Single fuse (SF) requires 20, 277 or 347 voltage option. Double fuse (DF) requires 208, 240 or 480 voltage option. Not available with ELCW. 8 Also available as a separate accessory; see Accessories information. 9 See the electrical section on page 3 for more details. One Lithonia Way Conyers, Georgia 3002 Phone: Acuity Brands Lighting, Inc. All rights reserved.

16 Performance Data Lumen Output Lumen values are from photometric tests performed in accordance with IESNA LM Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Contact factory for performance data on any configurations not shown here. LEDs 0C (0 LEDs) 20C (20 LEDs) Drive Current (ma) 350mA System Watts 4W 530 ma 20W 700 ma 27W 000 ma 40W 350mA 24W 530 ma 36W 700 ma 47W 000 ma 74W Dist. Type 30K 40K 50K AMBER Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW Lumens B U G LPW T2S, , , T2M, , , T3S, , , T3M, , , T4M, , , TFTM, , , ASYDF, , , T2S 2, , ,29 0, T2M, , ,5 0 06, T3S 2, , , , T3M 2, , , , T4M, , , , TFTM 2, , ,22 0 0, ASYDF, , , , T2S 2, , , , T2M 2, , , , T3S 2, , , , T3M 2, , , , T4M 2, , ,78 0 0, TFTM 2, , , , ASYDF 2, , , , T2S 3, , , , T2M 3, , , , T3S 3, , , , T3M 3, , , , T4M 3, , , , TFTM 3, , , , ASYDF 3, , , , T2S 2, , , , T2M 2, , , , T3S 2, , , , T3M 2, , , , T4M 2, , , , TFTM 2, , , , ASYDF 2, , , , T2S 4, , , , T2M 3, , , , T3S 4, , , , T3M 3, , , , T4M 3, , , , TFTM 4, , , , ASYDF 3, , , , T2S 5, , , , T2M 4, , , , T3S 5, , , , T3M 5, , , , T4M 4, , , , TFTM 5, , , , ASYDF 4, , , , T2S 7, , , , T2M 6, , , , T3S 7, , , , T3M 7, , , , T4M 6, , , , TFTM 7, , , , ASYDF 6, , , , One Lithonia Way Conyers, Georgia 3002 Phone: Acuity Brands Lighting, Inc. All rights reserved. DSXW-LED Rev. 6/07/6

17

18 Performance Data Lumen Ambient Temperature (LAT) Multipliers Use these factors to determine relative lumen output for average ambient temperatures from 0-40 C (32-04 F). Ambient Lumen Multiplier 0 C 32 F.02 0 C 50 F.0 20 C 68 F C 77 F C 86 F C 04 F 8 Projected LED Lumen Maintenance Data references the extrapolated performance projections for the DSXW LED 20C 000 platform in a 25 C ambient, based on 0,000 hours of LED testing (tested per IESNA LM and projected per IESNA TM-2-). Electrical Load LEDs 0C 20C Drive Current (ma) System Watts Current (A) 20V 208V 240V 277V 347V 480V W W W W W W W W To calculate LLF, use the lumen maintenance factor that corresponds to the desired number of operating hours below. For other lumen maintenance values, contact factory. Operating Hours 0 25,000 50,000 00,000 Lumen Maintenance Factor Photometric Diagrams To see complete photometric reports or download.ies files for this product, visit Lithonia Lighting s D-Series Wall Size homepage. Isofootcandle plots for the DSXW LED 20C K. Distances are in units of mounting height (5 ). Distribution overlay comparison to 250W metal halide. LEGEND 0. fc 0.5 fc.0 fc T2M Test No. 2260P22 tested in accordance with IESNA LM T3M Test No P22 tested in accordance with IESNA LM T3S Test No P22 tested in accordance with IESNA LM LEGEND DSXW, 0.5 fc TWF2, 0.5 fc 0 W Sidewalk LLDs: TWF2 = 0.72 DSXW = 5 TWF2: 29W DSXW LED 20C 40K 000 T3M, TWF2 250M Pulse, 5 Mounting Ht DSXW: 74W Options and Accessories T3M (left), ASYDF (right) lenses HS - House-side shields BSW - Bird-deterrent spikes WG - Wire guard VG - Vandal guard DDL - Diffused drop lens FEATURES & SPECIFICATIONS INTENDED USE The energy savings, long life and easy-to-install design of the D-Series Wall Size make it the smart choice for building-mounted doorway and pathway illumination for nearly any facility. CONSTRUCTION Two-piece die-cast aluminum housing has integral heat sink fins to optimize thermal management through conductive and convective cooling. Modular design allows for ease of maintenance. The LED driver is mounted to the door to thermally isolate it from the light engines for low operating temperature and long life. Housing is completely sealed against moisture and environmental contaminants (IP65). FINISH Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat finish that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish that can withstand extreme climate changes without cracking or peeling. Available in textured and non-textured finishes. OPTICS Precision-molded proprietary acrylic lenses provide multiple photometric distributions tailored specifically to building mounted applications. Light engines are available in 3000 K (70 min. CRI), 4000 K (70 min. CRI) or 5000 K (70 min. CRI) configurations. ELECTRICAL Light engine(s) consist of 0 high-efficacy LEDs mounted to a metal-core circuit board to maximize heat dissipation and promote long life (L88/00,000 hrs at 25 C). Class electronic drivers have a power factor >90%, THD <20%, and a minimum 2.5KV surge rating. When ordering the SPD option, a separate surge protection device is installed within the luminaire which meets a minimum Category C Low (per ANSI/IEEE C62.4.2). INSTALLATION Included universal mounting bracket attaches securely to any 4 round or square outlet box for quick and easy installation. Luminaire has a slotted gasket wireway and attaches to the mounting bracket via corrosion-resistant screws. LISTINGS CSA certified to U.S. and Canadian standards. Rated for -40 C minimum ambient. DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. WARRANTY Five-year limited warranty. Complete warranty terms located at CustomerResources/Terms_and_conditions.aspx. Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 C. Specifications subject to change without notice. One Lithonia Way Conyers, Georgia 3002 Phone: Acuity Brands Lighting, Inc. All rights reserved. DSXW-LED Rev. 6/07/6

19 SHEET INDEX SITE C-. C-.2 C-.3 C-.4 C-.5 SITE PLAN SITE LIGHTING PLAN FIRE DEPARTMENT ACCESS PLAN LOT COVERAGE USABLE OPEN SPACE NEW CLASS III DRIVEWAY APPROACH IN ACCORDANCE WITH MADISON GENERAL ORD. SECTION 0.08(4) 5' 24' 5' CAPITAL DRIVE 24.7' 4.6' 6' CONCRETE WALKS (TYP.) UNIVERSITY AVENUE LOCATOR MAP C-2. C-2.2 C-3.0 C-4.0 C-5.0 C-5. C-5.2 L-.2 ARCHITECTURAL BUILDING #2 A-.0 A-. A-.2 A-.3 A-.4 A-5. EXISTING CONDITIONS/DEMO PLAN SITE PLAN GRADING & EROSION CONTROL PLAN UTILITY PLAN EROSION DETAILS SITE DETAILS UTILITY DETAILS LANDSCAPE PLAN BASEMENT PLAN FIRST FLOOR PLAN SECOND FLOOR PLAN THIRD FLOOR PLAN FOURTH FLOOR PLAN TYPICAL UNIT FLOOR PLANS STOP SIGN 26.3' A-2. A-2.2 A-2.3 ELEVATIONS ELEVATIONS ELEVATIONS 8' R4' ADA STALL SIGN (TYP.) 2' 6' R4' A 2' VEHICLE OVERHANG (TYP.) 24' 8' 9' 6' R4' 2' 5' 38 PARKING STALLS R4' 8' A R4' CONCRETE WALKS (TYP.) R4' R4' B R4' DASHED LINE REPRESENTS FLOOR ABOVE 2' 5' R8' 0' 2' 0' 2' 4 BIKES 6' 2' 4.6' STOP SIGN 4.6' DASHED LINE REPRESENTS FLOOR ABOVE PROPOSED 52 UNIT 5 UNDERGROUND PARKING STALLS 5' 2' BUILDING 4 STORY 5' RIGHT TURN OUT ONLY 4 BIKES 4.6' 28.6' RIGHT TURN IN ONLY 5' 2' 5' SITE DEVELOPMENT DATA: DENSITIES: LOT AREA DWELLING UNITS LOT AREA / D.U. DENSITY COMMERCIAL AREA BUILDING HEIGHT 48,57 SF /. ACRES 52 DU 933 SF / UNIT 47 UNITS/ACRE APPROX. 8,00 SF 4 STORIES LOT COVERAGE 33,923 S.F. = 70% USABLE OPEN SPACE,424 S.F. (29 SF / D.U. ) DWELLING UNIT MIX: EFFICIENCY 3 ONE BEDROOM 24 ONE BEDROOM + DEN 3 TWO BEDROOM 2 TOTAL DWELLING UNITS 52 VEHICLE PARKING: SURFACE UNDERGROUND TOTAL 38 STALLS 5 STALLS 89 STALLS BICYCLE PARKING: SURFACE COMMERCIAL 3 STALLS SURFACE GUEST 5 STALLS (0% OF UNITS) UNDERGROUND GARAGE - WALL 2 STALLS (COVERED) UNDERGROUND GARAGE STD. 2'X6' 40 STALLS (COVERED) TOTAL 60 STALLS ISSUED Issued for Land Use - October 4, 207 8' 8' 9' 24' 7.6' 6' 2' R4' R4' ADA STALL SIGN (TYP.) PROJECT TITLE Mixed-Use Development 22.6' PATIO R8' GENERAL NOTES:. THE APPLICANT SHALL REPLACE ALL SIDEWALK AND CURB AND GUTTER WHICH ABUTS THE PROPERTY WHICH IS DAMAGED BY THE CONSTRUCTION OR ANY SIDEWALK AND CURB AND GUTTER WHICH THE CITY ENGINEER DETERMINES NEEDS TO BE REPLACED BECAUSE IT IS NOT AT A DESIRABLE GRADE REGARDLESS OF WHETHER THE CONDITION EXISTED PRIOR TO BEGINNING CONSTRUCTION. 2. ALL WORK IN THE PUBLIC RIGHT-OF-WAY SHALL BE PERFORMED BY A CITY LICENSED CONTRACTOR. 3. ALL DAMAGE TO THE PAVEMENT, ADJACENT TO THIS DEVELOPMENT SHALL BE RESTORED IN ACCORDANCE WITH THE CITY OF MADISON'S PAVEMENT PATCHING CRITERIA. 4. APPROVAL OF PLANS FOR THIS PROJECT DOES NOT INCLUDE ANY APPROVAL TO PRUNE, REMOVE, OR PLANT TREES IN THE PUBLIC RIGHT-OF-WAY. PERMISSION FOR SUCH ACTIVITIES MUST BE OBTAINED FROM THE CITY FORESTER, University Ave. Madison, WI SHEET TITLE Site Plan 5. EASEMENT LINES SHOWN ON THIS SHEET ARE FOR GENERAL REFERENCE ONLY - SEE CSM AND CIVIL SHEETS FOR ADDITIONAL AND MORE COMPLETE EASEMENT INFORMATION C-. SITE PLAN " = 20'-0" 0 GRAPHIC SCALE ( IN FEET ) INCH = 20 FT (24X36 PAPER) 6. CONTRACTOR SHALL INSTALL TREE PROTECTION FENCING IN THE AREA BETWEEN THE CURB AND SIDEWALK AND EXTEND IT AT LEAST 5 FEET FROM BOTH SIDES OF THE TREE ALONG THE LENGTH OF THE TERRACE. NO EXCAVATION IS PERMITTED WITHIN 5 FEET OF THE OUTSIDE EDGE OF THE TREE TRUNK. IF EXCAVATION WITHIN 5 FEET OF ANY TREE IS NECESSARY, CONTRACTOR SHALL CONTACT CITY FORESTRY ( ) PRIOR TO EXCAVATION TO ASSESS THE IMPACT TO THE TREE AND ROOT SYSTEM. TREE PRUNING SHALL BE COORDINATED WITH CITY FORESTRY PRIOR TO THE START OF CONSTRUCTION. TREE PROTECTION SPECIFICATIONS CAN BE FOUND IN SECTION 07.3 OF CITY OF MADISON STANDARD SPECIFICATIONS FOR PUBLIC WORKS CONSTRUCTION. ANY TREE REMOVALS THAT ARE REQUIRED FOR CONSTRUCTION AFTER THE DEVELOPMENT PLAN IS APPROVED WILL REQUIRE AT LEAST A 72-HOUR WAIT PERIOD BEFORE A TREE REMOVAL PERMIT CAN BE ISSUED BY FORESTRY, TO NOTIFY THE ALDER OF THE CHANGE IN THE TREE PLAN. SHEET NUMBER C-. PROJECT NO. Knothe & Bruce Architects, LLC 735

20 26.3' STATISTICS DESCRIPTION SYMBOL AVG MAX MIN MAX/MIN AVG/MIN Calculation Zone 2.0 fc 5.0 fc 0.3 fc 6.7: 6.7: A ISSUED Issued for Land Use - October 2, LUMINAIRE SCHEDULE SYMBOLLABELQTY MANUF. CATALOG DESCRIPTION FILE MOUNTING A 2 LITHONIA DSX LED 30C 000 DSX LED WITH 30 LEDs DSX_LED_30C_000_ 6'-0" POLE LIGHTING 30K T2M MVOLT HS AT 000 ma, 3000K, TYPE 230K_T2M_MVOLT_HS.iesON 2'-0" TALL MEDIUM OPTICS WITH CONC. BASE HOUSE-SIDE SHIELD B LITHONIA DSX LED 30C 000 DSX LED WITH 30 LEDs DSX_LED_30C_000_ LIGHTING 30K T3S MVOLT HS AT 000 ma, 3000K, TYPE 330K_T3S_MVOLT_HS.ies SHORT OPTICS WITH HOUSE-SIDE SHIELD EXAMPLE LIGHT FIXTURE DISTRIBUTION 6'-0" POLE ON 2'-0" TALL CONC. BASE A B PROPOSED BUILDING ISOLUX CONTOUR = 0.25 FC ISOLUX CONTOUR = 0.5 FC ISOLUX CONTOUR =.0 FC LIGHT FIXTURE PROJECT TITLE Mixed-Use Development 5533 University Ave. Madison, WI SHEET TITLE Site Lighting Plan C-.2 SITE LIGHTING PLAN " = 20'-0" 0 GRAPHIC SCALE ( IN FEET ) INCH = 20 FT (24X36 PAPER) SHEET NUMBER C-.2 PROJECT NO. Knothe & Bruce Architects, LLC 735

21 20' WIDE CAPITAL DRIVE FIRE LANE UNIVERSITY AVENUE NEW CLASS III DRIVEWAY APPROACH IN ACCORDANCE WITH MADISON GENERAL ORD. SECTION 0.08(4) CONCRETE WALKS (TYP.) STOP SIGN 26.3' 26' WIDE AERIAL APPARATUS ADA STALL SIGN (TYP.) 4 BIKES CONCRETE WALKS (TYP.) STOP SIGN ISSUED Issued for Land Use - October 4, PARKING STALLS 4 BIKES 2' VEHICLE OVERHANG (TYP.) DASHED LINE REPRESENTS FLOOR ABOVE DASHED LINE REPRESENTS FLOOR ABOVE PROPOSED BUILDING 4 STORY 52 UNIT 5 UNDERGROUND PARKING STALLS ADA STALL SIGN (TYP.) 20' WIDE FIRE LANE PROJECT TITLE Mixed-Use Development PATIO 5533 University Ave. Madison, WI SHEET TITLE Fire Department Access Plan C-.3 FIRE DEPARTMENT ACCESS PLAN " = 20'-0" 0 GRAPHIC SCALE ( IN FEET ) INCH = 20 FT (24X36 PAPER) SHEET NUMBER C-.3 PROJECT NO. Knothe & Bruce Architects, LLC 735

22 LOT COVERAGE TOTAL LOT AREA = 48,57 SF LOT COVERAGE = 33,923 SF (70 %) CAPITAL DRIVE UNIVERSITY AVENUE NEW CLASS III DRIVEWAY APPROACH IN ACCORDANCE WITH MADISON GENERAL ORD. SECTION 0.08(4) CONCRETE WALKS (TYP.) STOP SIGN 26.3' ADA STALL SIGN (TYP.) 4 BIKES CONCRETE WALKS (TYP.) STOP SIGN ISSUED Issued for Land Use - October 4, PARKING STALLS 4 BIKES 2' VEHICLE OVERHANG (TYP.) DASHED LINE REPRESENTS FLOOR ABOVE DASHED LINE REPRESENTS FLOOR ABOVE PROPOSED BUILDING 4 STORY 52 UNIT 5 UNDERGROUND PARKING STALLS ADA STALL SIGN (TYP.) PROJECT TITLE Mixed-Use Development PATIO 5533 University Ave. Madison, WI SHEET TITLE Lot Coverage C-.4 LOT COVERAGE " = 20'-0" 0 GRAPHIC SCALE ( IN FEET ) INCH = 20 FT (24X36 PAPER) SHEET NUMBER C-.4 PROJECT NO. Knothe & Bruce Architects, LLC 735

23 USABLE OPEN SPACE GROUND SPACE = 7,94 SF DECKS & PATIOS = 3,078 SF ROOF TERRACE = 405 SF TOTAL USABLE OPEN SPACE =,424 SF 26.3' ISSUED Issued for Land Use - October 4, 207 PROPOSED BUILDING PROJECT TITLE Mixed-Use Development 5533 University Ave. Madison, WI SHEET TITLE Usable Open Space C-.5 USABLE OPEN SPACE " = 20'-0" 0 GRAPHIC SCALE ( IN FEET ) INCH = 20 FT (24X36 PAPER) SHEET NUMBER C-.5 PROJECT NO. Knothe & Bruce Architects, LLC 735

24

25

26

27

28

29

30

31