Spare parts list. Hydraulic breakers RX 3.

Transcription

1 Hydraulic breakers

2 c

3 Contents Contents General information Hydraulic breaker Percussion unit Tightening torques Working tools Accessories Hydraulic hoses Optional equipment Kits kit Label kit Dimensions c 3

4 c

5 General information This spare parts list applies to the following: Hydraulic breaker Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions! c 5

6 Hydraulic breaker c

7 No. Remark Quantity Breaker box Elastic pad Guide plate Guide plate Shock absorber Plug Plug Cover Plug c 7

8 Percussion unit 0 3 A A A A c

9 No. Remark Quantity Bolt Washer Cover Filling valve Threaded plug Backup ring Backup ring bush Plate spring Spacer Control valve Cylinder bush Wiper Piston Threaded insert Dowel pin Fitting Cap Housing Grease nipple Retainer pin Split pin Wear bush 69. x 5.33 mm.73 x 0. in x 4.65 mm.77 x 0.8 in x 4.65 mm 3.73 x 0.8 in x 5.33 mm 3.7 x 0. in. 47 x 5.33 mm.85 x 0. in x 5.33 mm.3 x 0. in x 5.33 mm 3.47 x 0. in. 50 x 65.5 x 6 mm.97 x.58 x 0.4 in. Ø 04 mm Ø 4.09 in. 9.8 x.46 mm 0.76 x 0.0 in c 9

10 Tightening torques No. Tightening torque Remark 0 Bolt. Pretighten the bolts to 5 Nm, proceeding in a crosswise fashion,. then tighten each bolt through 30 in a crosswise fashion, 3. finally tighten each bolt again through 30 in a crosswise fashion Filling valve Threaded plug Fitting Grease nipple 30 Nm 0 Nm 90 Nm 0 Nm c

11 Working tools 3 5 (.05) L W L T Metric No. W (mm) L (mm) L T (mm) Wt (kg) 3 Moil point (conical) Chisel (cross) Blunt tool Imperial No. W (in.) L (in.) L T (in.) Wt (lb) 3 Moil point (conical) Chisel (cross) Blunt tool c

12 Accessories Hydraulic hoses Remark Quantity Hose I.D. 5 (0.59 in.), both ends 8 L (M 6 x.5) conical seal 4, length 500 mm (59 in.) Optional equipment Remark Quantity Chisel paste Grease gun Service box with nitrogen cylinder Test gauge wear bush Adapter plate matching the carrier Base plate Bolt kit Allen key Open end spanner 500 g (. lbs) (carton of 30 pieces) l 0.44 gal (0.53 US gal) Consult the Chicago Pneumatic Customer Center/Dealer in your area. mm for bolt kit size 4/7 for bolt kit c

13 Kits kit Remark Quantity kit Threaded plug Backup ring Backup ring Wiper 47 x 5.33 mm.85 x 0. in x 5.33 mm.3 x 0. in. (70 shore) 69. x 5.33 mm.73 x 0. in. (90 shore) 70.3 x 4.65 mm.77 x 0.8 in. (90 shore) 94.6 x 5.33 mm 3.7 x 0. in. (90 shore) x 4.65 mm 3.73 x 0.8 in. (90 shore) Ø 04 mm Ø 4.09 in 88.5 x 5.33 mm 3.47 x 0. in. (90 shore) 50 x 65.5 x 6 mm.97 x.58 x 0.4 in. 9.8 x.46 mm 0.76 x 0.0 in. (70 shore) Label kit Remark Quantity Label kit c 3

14 Dimensions mm (inch) Ø 8 30 (.60) 835 (3.57) 30 0 Ø 5 (.05) 90 (7.48) (.80) Ø (0.7) 0 65 (.56) (0.79) (.77) (5.) 45 (8.66) (3.38) c

15 c 5

16 040 No c Copyright Atlas Copco Construction Tools AB KALMAR SWEDEN