Super Betsy, designed and built by professionals, for professionals

Transcription

1 1

2 2 Super Betsy, designed and built by professionals, for professionals Quality with innovation and a passion to provide solutions that benefit our customers is the driving force behind continuous product improvement and new product development to fit the needs of our customers. Our in-house ability to analyse, design, manufacture, and test our products ensures that our pump units meet the highest standards. Betsyrime electronic priming system Betsyrime has no moving parts in the priming chamber, making the system ideal for handling contaminated liquids without the usual risk of mechanical interference. The priming system vacuum pump only operates when the liquid in the priming chamber falls below a predetermined level. Super Betsy idrostal screw solids handling pump The idrostal pump has been designed to cope with the most difficult liquids, including those with large size solids content as well as viscose and high specific gravity liquids. As an example, contaminated bentonite and raw sewage can be pumped with ease. The screw impeller is extremely efficient and therefore the power required to drive the unit is far less than that of traditional solids handling pumps. Its clog free properties combined with its very large free passage ensures that the user has problem free pumping and low fuel consumption. The idrostal pump can be supplied in different materials of construction to suit your application. ❷ ❶ idrostal Screw Centrifugal ump ❷ Betsyrime Electronic riming System ❶ Designed, built and tested at our own European facilities Shaft seals All the Super Betsy pumps are fitted with high grade double mechanical shaft seals submerged in an oil bath. This allows the pumps to run dry without overheating the Sic-Tungsten Carbide (medium side) or Sic-Antimony Carbon (atmospheric side) seal surfaces of the mechanical shaft seals. Super Betsy Whisper Sound Reduction Canopies All the canopies are constructed of high quality sheet steel which is galvanized after cutting and welding. This ensures that the canopy will stay in top condition for many years. The canopies have been designed to reduce noise emissions to a very low level while the fully enclosed fuel tank eliminates the possibility of environmental contamination caused by fuel leakage. Lower container The robust container is hot-dip galvanized and acts as a secondary enclosure for the fuel tank. Added fork lift channels assist in the safe transport of the pump set by means of fork lift trucks.

3 Overview Super Betsy range [1/] Description 1-D 1-DS 15-EM Ø Suction - Discharge flanges N1, DN1 N1, DN1 N1, DN15 Max capacity [m /h] - [usgpm] 15 rpm: 16 m /h 62 usgpm 165 rpm:147 m /h - 65 usgpm 15 rpm: 17 m /h 76 usgpm. 2 rpm: 28 m /h usgpm 15 rpm: 288 m /h 1268 usgpm 165 rpm:2 m /h 1426 usgpm Max discharge head [m/ft] 15 rpm: 15m 5ft 165 rpm: 21m 69ft 15 rpm: 15m 5ft 2 rpm: 2m 15ft 15 rpm: 24m 79ft 165 rpm: m 98ft Maximum suction lift [m/ft] 8.5m 28ft 8.5m 28ft 8.5m 28ft Ø spherical free passage impeller [mm / in] 75mm - in 1mm 4in 1mm 4in Capacity vacuum pump [m /h-cfm] m /h 4/6/1. cfm 2/7/59 m /h 4/6/1 cfm 2/7/59 m /h 4/6/1 cfm 2/7/59 Type idrostal pump D4R-MN(1R/R)+DDM1W-MQFFT D4R-SMN(1R/R)+ DDM1W-MQFFT E125-M(1/R)+EFM1W-MQFFT Material impeller 1R: GGG6 / R: Cr. Mo Steel 1R: GGG6 / R: Cr. Mo Steel 1R: GGG6 / R: Cr. Mo Steel Material wear liner 1R:GG2 / R:idrohard 1R:GG2 / R:idrohard 1R:GG2 / R:idrohard Shaft seals (double seals in oil bath) ump side: sic/tungsten carbide ump side: sic/tungsten carbide ump side: sic/tungsten carbide Diesel engine make & type atz 1D81Z atz 1D91* single speed 15 rpm erkins 4D-11 erkins 4F-11* erkins 4D-15 Euro Stage - US Tier Not required / Tier 4 Final* A / Tier 4 Interim Tier 4 Final* A / Tier 4 Interim Rated engine power [kw]-[hp] 15 / rpm / rpm 15 / 2 rpm / 15 2 rpm 15 / 165rpm / rpm Absorbed power pump full load [kw]- / 165 rpm / 6 rpm / 2 rpm / 15 rpm / 165 rpm 1 15 / 19 rpm Fuel consumption per BE 15 rpm.9 ltr -.24 usg 165 rpm 1.2 ltr.2 usg 15 rpm 1.1 ltr -. usg 2 rpm ltr.8 usg 15 rpm 2.8 ltr -.74 usg 165 rpm.8ltr 1 usg Maximum engine [rpm] standard 15 rpm optional 165 rpm not Tier 4F engine standard 15 rpm optional 2 rpm standard 15 rpm optional 165 rpm Capacity fuel tank 18 litres 47 usg 18 ltr 47 usg 5 litres 9 usg Running BE in hours circa rpm circa rpm circa rpm circa 6 2 rpm circa rpm circa rpm Sound power level Lw [db] Sound pressure level Lp 7m/2ft 79 db 54 db(a) 79 db 54 db(a) 81 db 56 db(a) Global measurements (l x b x h) [mm] [in] 215 x 948 x 1475 mm 79 x 7 x 58 in 215 x 948 x 1475 mm 79 x 7 x 58 in 262 x 146 x 169 mm 1 x 41 x 66 in Weight with fuel (filled) [kg] [lbs] 1215 kg 2679 lbs 1215 kg 2679 lbs 1855 kg 49 lbs Subject to changes without prior notice.

4 4 Overview Super Betsy range [2/] Description 15-E 15-ES 15-ES 15-FS Ø Suction - Discharge flanges N1, DN15 N1, DN2 N1,DN15 N1, DN15 N1, DN2, N1, DN15 Max capacity [m /h] - [usgpm] 15 rpm: 24 m /h 156 usgpm 18 rpm: 67 m /h 167 usgpm 15 rpm: 74 m /h 1647 usgpm 19 rpm: 497 m /h 2188 usgpm 15 rpm: 2 m /h 11 usgpm 22 rpm: 288 m /h 1268 usgpm 15 rpm: 78 m /h 1664 usgpm 185 rpm: 468 m /h 26 usgpm Max discharge head [m/ft] 15 rpm: 28m 79ft 18 rpm: 4m 11ft 15 rpm: 1m 12ft 19 rpm: 51m 167ft 15 rpm: 27m 89ft 22 rpm: 59m 194ft 15 rpm: 4m 89ft. 185 rpm: 69m 194ft. Maximum suction lift [m/ft] Ø spherical free passage impeller [mm / in] 8.5m 28ft 8.5m 28ft 8.5m 28ft 8.5m 28ft 1mm 4in 9mm 1/2in 75mm in 75mm in Capacity vacuum pump [m /h-cfm] m /h 4/6/1 cfm 2/7/59 m /h 4/6/1 cfm 2/7/59 m /h 4/6/1 cfm 2/7/59 m /h 4/6/1 cfm 2/7/59 Type idrostal pump E125-(1/R)+EFM1W-MQFFT E125-S(1/R)+EFM1W-MQFFT E125-S(1/R)+EFM1W-MQFFT F4K-S(1R/R)+FGM1W-XK Material impeller 1R: GGG6 / R: Cr. Mo Steel 1R: GGG6 / R: Cr. Mo Steel 1R: GGG6 / R: Cr. Mo Steel 1R: GGG6 / R: Cr. Mo Steel Material wear liner 1R:GG2 / R:idrohard 1R:GG2 / R:idrohard 1R:GG2 / R:idrohard 1R:GG2 / R:idrohard Shaft seals (double seals in oil bath) ump side: sic/tungsten carbide ump side: sic/tungsten carbide ump side: sic/tungsten carbide ump side: sic/tungsten carbide Diesel engine make & type erkins 44D-22 erkins 44D-22T atz 45TIC* erkins 44D-22 JCB IU TC-55 JCB TCAE-55* Euro Stage - US Tier A / Tier 4 Interim A / Tier 4 Interim B / Tier 4 Final* A / Tier 4 Interim A / Tier 4 Interim B / Tier 4 Final* Rated engine power [kw]-[hp] 18.4kW@15/22kW@18 rpm 25hp@15/26hp@18 rpm 24kW@15 / 2kW@19 rpm 2hp@15 / 4hp@19 rpm 15 / 22 rpm 15 / 22rpm 15 / 185 rpm* 15 / 185 rpm* Absorbed power pump full load [kw]-[hp] / 18 rpm 15 / rpm / 19 rpm 15 / rpm / 22 rpm 15 / 22 rpm / 185 rpm 15 / 185 rpm Fuel consumption per BE 15 rpm ltr -.8 usg 18 rpm 5.6ltr 1.5 usg 15 rpm 4 ltr - 1 usg 19 rpm 8ltr 2 usg 15 rpm ltr.8 usg 22 rpm 6.2 ltr 1.6 usg 15 rpm 6.4 ltr 1.7 usg 185 rpm 12 ltr.2 usg Maximum engine [rpm] standard 15 rpm optional 18 rpm standard 15 rpm optional 19 rpm standard 15 rpm optional 22 rpm standard 15 rpm optional 185 rpm Capacity fuel tank 5 litres 9 usg 5 litres 9 usg 5 litres 9 usg 7 ltr 185 usg Running BE in hours circa rpm circa rpm circa rpm circa rpm circa rpm circa rpm circa rpm circa rpm Sound power level Lw [db] Sound pressure level Lp 7m/2ft 8 db 58 db(a) 8 db 58 db(a) 8 db 58 db(a) 9 db 65 db(a) Global measurements (l x b x h) [mm] [in] 262 x 146 x 169 mm 1 x 41 x 66 in 262 x 146 x 169 mm 1 x 41 x 66 in 262 x 146 x 169 mm 1 x 41 x 66 in 14 x 121 x 1965 mm 124 x 48 x 77 in Weight with fuel (filled) [kg] [lbs] 19 kg 4189 lbs 192 kg 422 lbs 19 kg 4189 lbs 25 kg 5512 lbs Subject to changes without prior notice.

5 Overview Super Betsy range [/] 5 Description 2-F 2-ESL -FD 4-SD Ø Suction - Discharge flanges N1, DN2 N1, DN2 N1, DN N1, DN 4 N1, DN 4 Max capacity [m /h] - [usgpm] 15 rpm: 58 m /h 2567 usgpm 175 rpm: 684 m /h 12 usgpm 15 rpm: 6 m /h 2774 usgpm 18 rpm: 78 m /h 25 usgpm 165 rpm: 115 m /h 57 usgpm 1 rpm: 196 m /h 84 usgpm 15 rpm: 216 m /h 8876 usgpm Reduction gearbox fitted. Ratio: 1.51 Max discharge head [m/ft] 15 rpm: 9m 128ft 175 rpm: 5m 174ft 15 rpm: 22m 72ft 18 rpm: 2m 15ft 165 rpm: 6m 118ft. 1 rpm: 8m 125ft. 15 rpm: 42m 18ft. Maximum suction lift [m/ft] Ø spherical free passage impeller [mm / in] 8.5m 28ft 8.5m 28ft 8.5m 28ft 8.5m 28ft 115mm 4.5in 1mm 4in 12mm 4.7in 15mm 6in Capacity vacuum pump [m /h-cfm] m /h 4/6/1. cfm 2/7/59 m /h 4/6/1 cfm 2/7/59 m /h 4/6/1 cfm 2/7/59 m /h 4/6/1 cfm 2/7/59 Type idrostal pump F6K-R+FGM1W-XK E8R-SLN(1R/R)+EFM1W-MQFFT F1K-DR+FGM1W-XK 12K-SDR+GM1W-XK Material impeller R: Cr. Mo Steel 1R: GGG6 / R: Cr. Mo Steel R: Cr. Mo Steel R: Cr. Mo Steel Material wear liner R:idrohard 1R:GG2 / R:idrohard R:idrohard R:idrohard Shaft seals (double seals in oil bath) ump side: sic/tungsten carbide ump side: sic/tungsten carbide ump side: sic/tungsten carbide ump side: sic/tungsten carbide Diesel engine make & type JCB IU TC-55 JCB TCAE-55* erkins 44D-22T atz 45TIC* JCB IU TC-55 JCB TCAE-55* JCB IU TCAE-9kW Euro Stage - US Tier A / Tier 4 Interim B / Tier 4 Final* A / Tier 4 Interim B / Tier 4 Final* A / Tier 4 Interim B / Tier 4 Final* Stage B Tier 4 interim Rated engine power [kw]-[hp] 175 rpm* 15 / 175rpm* 15 / 18 rpm 15 / 18 rpm 165 rpm* 165 rpm* 196 / 24 rpm 196 / 24 rpm Absorbed power pump full load [kw]-[hp] / 175 rpm 15 / 175 rpm / 18 rpm 15 / rpm rpm 165 rpm / 24 rpm 196 / 24 rpm Fuel consumption per BE 15 rpm 7.4 ltr 1.9 usg 175 rpm 11.8 ltr.1 usg 15 rpm 4.6ltr 1.2 usg 18 rpm 7.6 ltr 2usg 165 rpm 12.7 ltr.6 usg 196 rpm 16.2 ltr 4. usg 24 rpm 21.6 ltr 5.7 usg Maximum engine [rpm] standard 15 rpm optional 175 rpm standard 15 rpm optional 18 rpm standard 165 rpm standard 196 rpm optional 24 rpm Capacity fuel tank 7 ltr 185 usg 5 ltr 9 usg (standard) 7 ltr 185 usg (with canopy ) 7 ltr 185 usg 7 ltr 185 usg Running BE in hours circa rpm circa rpm circa rpm circa rpm circa rpm circa rpm circa 7 24 rpm Sound power level Lw [db] Sound pressure level Lp 7m/2ft 89 db 64 db(a) 9 db 65 db(a) 9 db 65 db(a) 95 db 7 db(a) Global measurements (l x b x h) [mm] [in] 14 x 121 x 1965 mm 124 x 48 x 77 in 262 x 146 x 169 mm 1 x 41 x 66 in 14 x 121 x 1965 mm 124 x 48 x 77 in 494 x 146 x 2814 mm 195 x 47 x 111 in Weight with fuel (filled) [kg] [lbs] 14 kg 692 lbs 29 kg 646 lbs 45 kg 757 lbs 599 kg 126 lbs Subject to changes without prior notice.

6 6 Life cycle costs and the huge fuel savings to be made by using the SuperBetsy umping System Energy costs are the largest single element in pump Life Cycle Costs (LCC). By reducing the energy consumption during the operational life of a pump unit, large financial savings can be made. The SuperBetsy umps are fitted with the idrostal Screw Centrifugal impellers, which have a large spherical free passage with inherent non-clogging properties. The elimination of solids hang up reduces energy consumption because a partially blocked pump is always inefficient. Conventional pumps with large free passages, for example vortex impeller pumps or selfpriming pumps have a large free passage but they do not possess the same high degree of non-clogging properties as a idrostal, and their efficiency is very much lower. The fuel savings which can be achieved by using the Super Betsy umping Systems is best illustrated by the following comparison: A Betsy 125M operating at 15 rpm will consume litres of diesel per hour. A diesel driven pump set fitted with a vortex impeller with the same and comparable pumping conditions will consume 7.8 litres of diesel fuel per hour. We assume now a fuel price of 1.2 per litre. Over a period of 168 hours (one week of continuous running) fuel consumption of a Vortex impeller will be about 11 litre with fuel costs of 1, Fuel consumption of a Super Betsy 125M will be about 54 litre with fuel costs of 64.8, a saving on fuel costs of 62%. Average Life Cycle Costs after hours Super Betsy 4-SD Super Betsy -FD Super Betsy 2-F Super Betsy 15-EM Super Betsy 1-D % 2% 4% 6% 8% 1% 12% 14% urchase Maintenance Fuel Consumption Other areas where Super Betsy will save you costs 1. The large integral fuel tank reduces the need to constantly refuel, saving unnecessary labour and transport costs, especially on weekends when labour costs are high. 2. Standard level switching on all models. This automatic monitoring system will start and stop the pump unit automatically depending on the water level.. Betsyrime. This automatic dry prime system only runs when required. For example during initial start-up priming and when operating under snore conditions. 4. The externally adjustable wear liner allows easy clearance adjustment between the wear liner and the impeller of the pump, thereby allowing the original efficiency to be maintained. 5. igh quality mechanical shaft seals, either Sic-Tungsten Carbide (medium side) or Sic-Antimony Carbon (atmospheric side) in an oil bath, gives extremely long-life and low maintenance intervals.certification and low maintenance requirements. 6. Low noise emissions allows the pump unit to be deployed in noise sensitive areas without the need for an electricity supply. 7. Modern diesel engines with current European Stage & EA Tier certification combined with low maintenance requirements. 8. Fully galvanized noise reduction canopy with easy access and lockable doors.the galvanized canopy will withstand corrossion and is robustly built guaranteeing many years of service. 9. Built with standard products. All of Super Betsy s components are of the highest quality and are obtainable throughout the world from local suppliers. Alternatively our Spares Department can quickly supply parts from our comprehensive stock. 1. Super Betsy pumps are built on the basis of practical knowledge and the technical understanding that we have gained over the last 6 plus years in designing and manufacturing high grade pump units that are suitable for the most diverse and demanding conditions.

7 78% 1-D 1-DS 7 (ft) 15 rpm 165 rpm (ft) rpm 18 rpm 2 rpm SuperBetsy Curves % 74% 7% % % 7% (pk)(kw) m / h EM 15-E ES (ft) rpm 165 rpm (ft) rpm 18 rpm (ft) m / h rpm 18 rpm 15 rpm 19 rpm 15 rpm % 76% 75% 78% 12 4 inch 4 76% 78% 2 75% inch mm Q 576 Q m /h 256Q (pk) (kw) (ft) m /h Betsy 125M 165 rpm 15-ES 15 rpm 2 rpm 22 rpm 15 rpm (pk)(kw) mm (ft) Betsy rpm 15-FS 15 rpm 185 rpm 18 rpm (pk) (kw) (ft) F rpm 175 rpm Q Q m /h Q % 76% 74% % 79% % ŋ 8% 2 79% Q Q m /h Q m /h. (pk) (kw) m /h (pk) (kw) (pk)(kw) (ft) ESL 15 rpm 18 rpm Q Q m /h Q (ft) FD 2 41mm inch rpm (ft) 15 rpm SD 175 rpm 1 rpm 1225 rpm Betsy rpm 2 8% inch 8% 2 8% ŋ 78% (pk) (kw) 4.. (pk) 67. (kw) m /h. () 14 (kw) m / h

8 8 SuperBetsy Curves (ft) m / h SuperBetsy 1-D SuperBetsy 1-DS SuperBetsy 15-EM SuperBetsy 15-E SuperBetsy 15-ES SuperBetsy 15-ES SuperBetsy 15-FS SuperBetsy 2-F SuperBetsy 2-ESL SuperBetsy -FD SuperBetsy 4-SD idrostal AG Gigering Neunkirch Switzerland Tel. +41 () Tel. +41 () info@hidrostal.com Document version Copyright: idrostal AG