AUCTION CNC CNC CNC CNC TUESDAY, OCTOBER 7 10:00 A.M. A 12% BUYER S PREMIUM WILL APPLY ONSITE A 15% BUYER S PREMIUM WILL APPLY VIA WEBCAST

Transcription

1 AUCTION LATE MODEL FABRICATION FACILITY Featuring: Amada 2,000 Watt Laser, Finn-Power Turret Press With Sheet Load/Unload System, (3) Amada Turret Presses, (7) Late Model Amada Pressbrakes up to 170 Ton X 13' Capacity, Sheet Metal Sanders, Hardware Insertion Presses, Welding Machinery, Material Handling Equipment, Raw Materials & Hardware, & Much, Much More! PLUS Real Estate for Sale or Lease by Private Negotiation, See Page 7! 2004 > AMADA FABRIVISION L LASER INSPECTION SYSTEM 2006 < AMADA LASMAC MDL. LC-2415CXIII NT LASER CUTTING MACHINE At the Premises of LOGIC METALS TECHNOLOGY, INC W. Kingsley Road GARLAND, TEXAS (See Directions on Back Page) FINN POWER E-5-25 TURRET PUNCHING SYSTEM 1991 TUESDAY, OCTOBER 7 10:00 A.M. INSPECTION: Monday, October 6 9:00 A.M. to 4:00 P.M. & Morning of Sale A 12% BUYER S PREMIUM WILL APPLY ONSITE A 15% BUYER S PREMIUM WILL APPLY VIA WEBCAST On-Site Bidding in Garland, Texas or Bid by Webcast at VIEW OF AMADA VIPROS AND SHEET LOAD/UNLOAD SYSTEM Read Terms and Conditions on Back Page of Brochure VIEW OF PRESSBRAKES 7 AVAILABLE Sale Conducted By: 2901 W. Sam Houston Pkwy. N., Suite A-130, Houston, TX PHONE: (713) FAX: (713) pmi@pmi-auction.com WEBSITE: Bob Braman TX Lic. #6362 Ron Moore TX Lic. #7314 HOUSTON DALLAS ST. LOUIS In Conjunction With: Perfection Plant Liquidations, LLC 3100 Dundee Rd., Suite 915 Northbrook, IL Phone: Fax: See XMI Financing Recommendation on Page 6

2 2004 AMADA LASER ACCESSORIES AMADA MDL. LC-2415CXIII NT LASER CUTTING MACHINE LASER CUTTING SYSTEM AMADA MDL. LC-2415CXIII NT HYBRID LASER CUTTING MACHINE, new 10/2004, Fanuc series 160i-Lb control, 99" x-axis travel, 61" Y-axis travel, 61" x 198" max. sheet size (1 repos.),.5" max. material thickness (carbon steel), 727 lb. max. material weight, 787 IPM max. cutting spd., 3,149 IPM max. positioning spd., Fanuc Mdl. C 2,000 watt laser resonator, Koolant Koolers Mdl. HCV7500PR-NF-FILP chiller system, S/N 20626, Torit Mdl. ABF-4 down-flow dust collection unit, S/N , Machine S/N AMADA TURRET PRESSES AMADA VIPROS MDL. 357, new 1991, Amadan/Fanuc 04P-C control, 33 T. punching cap., hyd. driven ram, 58-station turret w/(2) auto. index stations, 50" x 72" sheet size, 50" x 144" max. sheet size (w/repo.),.250" max. material thickness, 1.57" ram stroke, 200 hits per 1" pitch, Unisorb vibration isolation pads, S/N AMADA MDL. NCMP-1224 AUTOMATIC SHEET LOAD/UNLOAD SYSTEM, dual tray design, IRC-1000 control system, S/N (to be offered separately). AMADA PEGA MDL. 357, new 1990, Amadan/Fanuc 04P-C control, 33 T. punching cap., 58-station thk. turret w/(2) auto. index stations, 350 SPM, 50" x 72" sheet size, 50" x 144" max. sheet size (w/repo.),.250" max. material thickness, Unisorb vibration isolation pads, S/N P QH. AMADA PEGA MDL. 344Q, Fanuc 6MP control, 33-ton punching cap., 40- sta. thin turret w/(2) auto. index stations, 40" x 40" sheet size, 40" x 80" max. sheet size (w/repo),.250" max. material thickness, 220 hits per 1" pitch, S/N AL FINN POWER E-5-25 TURRET PUNCH W/SHEET LOAD/UNLOAD SYSTEM FINN-POWER TURRET PUNCHING SYSTEM FINN-POWER MDL. E5-25 PUNCHING SYSTEM, new, Siemens 840D control w/ Windows based user interface, servo driven ram, 22 T. punching cap., 98" x 48" max. sheet size,.32" max. material thickness, 440 lb. cap. max. material weight, 20-station thk. turret w/(2) multi-tool stations, programmable rotation on all tool stations, 3.51" max. punch dia., 310 hits per 1" pitch, auto. clamp setting, brush style table, Finn-Power Express programmable sheet load/unload system w/(2) finished material trays and roller-type hyd. scissor lift cart, slug conveyor, S/N 11-E SHEETMETAL LASER INSPECTION MACHINE AMADA/VIRTEK FABRIVISION L MDL. LPS-1DF, new 2/2006,.002" scanning accuracy, 48" x 48" max. workpiece size, 8" max. part thickness, 300 lb. max. part weight, variable height scanning, S/N AMADA PEGA 357 TURRET PUNCH AMADA VIPROS 357 TURRET PRESS < AMADA FABRIVISION L LASER INSPECTION SYSTEM PROXY BIDS If you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) for instructions, or go to our website at

3 1993 AMADA PROMECAM MDL. HFBO PRESSBRAKE PRESSBRAKES AMADA PROMECAM 170 T. X 157" CAP. DOWN-ACTING DESIGN, new 1993, Mdl. HFB , Amada Operateur control, 70.8" length of bed and ram, 148.4" dist. btn. housings, 7.09" stroke, 16.15" throat depth, 15 HP hyd. drive system, S/N H (2) AMADA 125 T. X 10' CAP. UP-ACTING DESIGN, new and 1998, Mdl. RG125, Amada NC9-EXII control, 118.2" max. length of bed and ram, 122.1" max. bending length, 100.5" dist. btn. housings, 15.76" throat depth, 3.94" stroke length, 14.5" open height, S/N , S/N AMADA 100 T. X 157" CAP. UP-ACTING DESIGN, new 1984, Mdl. RG-100L, Amada MC-9EX control, 157.6" max. length of bed and ram, 161.5" max. bending length, 122.1" dist. btn. housings, 15.76" throat depth, 3.94" stroke length, 14.85" open ht., S/N AMADA 80 T. X 98" CAP. UP-ACTING DESIGN, new 1984, Mdl. RG- 80, Amada Mdl. MC9-EX control, 94.6" max. length of bed and ram, 98.7" max bending length, 80.8" dist. btn. housings, 15.76" throat depth, 3.94" stroke length, 14.58" open ht., S/N (2) AMADA 50 T. X 78" CAP. UP-ACTING DESIGN, new 1991 and 1987, Mdl. RG-50, 78.7" max. length of bed and ram, 82.1" max. bending length, 59.9" dist. btn. housings, 15.76" throat depth, 3.94" stroke length, 14.58" open ht., S/N (1991) w/amada Mdl. MC9-EXII control, S/N (1987) w/amada Mdl. MC9-EX control. POWER SQUARING SHEAR AMADA 6" X 3/16", Mdl. M-2045, 6' x 3/16" nominal cap.,.177" x 78.74" actual cap., 60 SPM, programmable backgauge, 6' R.H. squaring arm, (2) front suppt. arms w/disappearing stops, foot pedal control, S/N AMADA RG-125 PRESSBRAKE AMADA 6' X 3/16" SHEAR FABRICATING PUNCH PIERCE-ALL PERF-O-MATOR 30 T. CAP. MDL. 3030A-4830DR SINGLE END, 30" max throat depth, 5 HP drive motor, 3-axis D.R.O. system, spacer/duplicator arm, wide assortment of punches and dies, S/N PUNCH & DIE GRINDERS AMADA MDL. TOGU-III AUTOMATIC, new 9/2005,.099" max. grinding depth, 6.3" max. tool dia., 9.449" servo controlled vert. axis travel, 72 RPM max. rotation spd., variable feeds, automatic cycle, S/N AMADA MDL. TEG-160ES MANUAL, 1-1/2 HP drive motor, 6" dia. 3-jaw chuck, coolant enclosure. AMADA TOGU III AUTOMATIC PUNCH GRINDER 2005 AMADA RG-80 PRESS BRAKE AMADA RG-50 PRESS BRAKE PIERCE ALL FABRICATING PUNCH 3

4 1998 AEM 37" DRY SANDING MACHINE TIMESAVERS 37" WET SANDING MACHINE PRESSBRAKE TOOLING HUGE ASSORTMENT OF PRECISION GROUND PRESSBRAKE TOOLING, INCLUDING TOP PUNCHES OF VARYING LENGTH AND RADIUS SPECIFICATIONS; BOTTOM DIES; DUTCH BENDING/HEMMING TOOLS; JOGGLE TOOLING; DISTANCE PIECES; MUCH MUCH MORE! TURRET PRESS TOOLING HUGE ASSORTMENT OF TURRET TOOLING FOR AMADA AND FINN- POWER TURRET PUNCHES IN BOTH THICK AND THIN TURRET STYLES BY AMADA, MATE, AND WILSON TOOL, WIDE RANGE OF SHAPES AND SIZES INCLUDING ROUND, SQUARE, OVAL, RECT- ANGULAR, ETC; ALSO, WIDE ASSORTMENT OF CUSTOM TOOL- ING SPECIALLY DESIGNED FOR COMPUTER/HI-TECH METAL EN- CLOSURE INDUSTRY. BELT SANDING MACHINES ABRASIVE ENGINEERING AND MFG. MDL DRY SANDING DESIGN, new 1998, 37" max. grinding width, variable spd. conveyor belt, 20 HP sanding belt drive motor, S/N MO ABRASIVE ENGINEERING AND MFG. MDL HDMW WET SANDING DESIGN, new 1998, 37" max. grinding width, 0 8" opening size, FPM variable spd. vacuum conveyor, dry-off section and paper filter, programmable machine setup, S/N TIMESAVERS MDL. CS-360 WET SANDING DESIGN, new, 37" max. grinding width, 0 8" opening size, FPM variable spd. vacuum conveyor, dry-off unit, paper filter water system, may be used as a brush or belt finishing machine, S/N 27733M. MISCELLANEOUS FINISHING EQUIPMENT ALMCO VIBRATORY FINISHING MACHINE, 3 cu. ft. rd. design, cycle timer. RECTANGULAR VIBRATORY FINISHING MACHINE, approx. 5 cu. ft., 15-1/2" x 44" rectangular urethane tub. CUSTOM BUILT STROKE SANDER, 6"W. x 60"L. custom fabricated stroke sander, drop-center design, enclosed drive unit. TORIT CYCLONE DUST COLLECTOR, (4) collection tubes and cyclone. HOBART DISHWASHER, stainless steel feed tray, polyurethane chemical tank, S/N N.A. PLASMA CUTTING MACHINE TRACKER 5' X 10', new 2005, Windows based PC control system, 60.5" x 120.5" max. cutting cap., 2.5" Z-axis travel, 300 IPM max. cutting spd., 3,000 lb. max. weight cap., Thermal Dynamics Cutmaster 101 plasma pwr. supply, S/N BCMS03064 (unused). MISCELLANEOUS FABRICATING MACHINERY AMADA MDL. CPS-54 AUTOMATIC TAPPING MACHINE, 3-station auto. rotating tapping head, Amadan CTS- 54 programmable control, S/N PEXTO MDL. 418-E INTIAL PINCH ROLL, 16 ga. x 48" cap. w/wire bending screw and fabricated steel stand, S/N 11/57. HARDWARE INSERTION PRESSES HAEGER MDL L, new 1998, 6-ton cap., 18" throat depth, foot pedal control, S/N 06L HAEGER MDL. HP6-C-1, 6-ton cap., 18" throat depth, foot pedal control, S/N HAEGER MDL HP-6, 6-ton cap., S/N UNUSED TRACKER PLASMA CUTTING MACHINE (UNUSED) HAEGER MDL L, 6 TON INSERTION PRESS

5 1998 OVER $250,000 MATERIAL & HARDWARE INVENTORY TO BE OFFERED AT THIS SALE! Primarily Suited to the High Technology Enclosure Industry Including: RAW MATERIAL (350) SHEETS OF NEW RAW MATERIAL INVENTORY, 48" x 144", 48" x 120" and 48" x 96" sizes, from 11 ga. to 20 ga. thickness, stainless steel, galvanized, cold rolled steel and hot rolled/p&o steel. INSERTION HARDWARE SELF-CLINCHING NUTS; STAND-OFFS; SELF-CLINCHING STUDS; BLIND AND STANDARD RIVNUTS; CAPTIVE SCREWS; RIGHT ANGLE FASTENERS; KEYHOLES AND PILOT PINS; METRIC AND STANDARD; CARBON AND STAINLESS STEELS. STANDARD HARDWARE HEX HEAD SCREWS; MACHINE SCREWS; PAN HEAD SCREWS; CARRIAGE BOLTS; PANEL FASTENERS; HEX NUTS; FLANGE NUTS; LOCKNUTS; ACORN NUTS; FLAT WASHERS; CUPPED WASHERS; SPLIT WASHERS; LOCK WASHERS; RIVETS OF ALL DESCRIPTIONS; SPRINGS; BUMPERS; TERMINALS; CASTERS; DOOR PULLS; HANDLES; STRIKE PLATES; HINGES; GASKETS; BUSHINGS; INSULATORS; BRACKETS AND COVERS. AEM 37" WET SANDING MACHINE 1998 KENT 6" X 18" HAND FEED SURFACE GRINDER WELDSALE PRECISION WELDING TABLE AND ACCESSORIES 2005 PARTIAL VIEW OF MIG WELDING MACHINES MIG WELDERS (3) MILLER MDL. MILLERMATIC 251, new 2005, v. rated output, 60% duty cycle, integrated wire feeder, single phase, roller cart base w/bottle rack, S/N LF440682B, S/N LE , S/N LF440681B. (4) MILLER MDL. MILLERMATIC 210, new 2005, v. rated output, 60% duty cycle, integrated wire feeder, single phase design, roller cart base w/bottle rack, S/N LF430953B, S/N LF B, S/N LF430951B, S/N LF430952B. L-TEC MDL. MIGMASTER 250, rated output, 50% duty cycle, integrated wire feeder, roller cart base w/bottle rack, S/N B92D TIG WELDERS MILLER SYNCROWAVE MDL. 350LX, new 2005, v. rated output, 40% duty cycle, Coolmate chiller, foot pedal control, TIG torch, roller cart base w/bottle rack, S/N LF430034L. L-TECH HELIARC SQUAREWAVE MDL. 250HF PLUS, v. rated output, 40% duty cycle, single phase, Coolmate chiller, foot pedal control, TIG torch, roller cart base w/ bottle rack, S/N B96E MILLER HELIARC MDL. 330A/BP, v. AC/DC rated output, 60% duty cycle, S/N JB SHUR-WELD, v. rated AC output, 60% duty cycle, v. DC rated output, 60% duty cycle, TIG torch, Miller Coolmate chiller, foot pedal control, S/N WELDING SHOP ACCESSORIES WELDSALE 5' X 10' PRECISION WELDING TABLE, fabricated steel stand, large qty. of clamping accessories. (3) SOUTHWORTH HYDRAULIC SCISSOR WELDING TABLES, 1,000 lb. cap., 60" x 66" x 1/2" and 48" x 72" x 3/4" plate steel tops. CUSTOM HYDRAULIC SCISSOR WELDING TABLE, 2,000 lb. cap., 60" x 90" x 1" steel top. PROJECTION SPOT WELDERS BANNER MDL. 1AP100-A KVA CAP., 440 primary volts, 6.8 to 10 secondary volts, 12" throat depth, press-type w/entron programm able weld controller, S/N PEER MDL. AR KVA CAP., 230 primary volts, 18" throat depth, foot pedal control, Entron programmable weld controller, S/N PARTIAL VIEW OF SHEET METAL INVENTORY AND RACKS MACHINE SHOP EQUIPMENT GOODWAY MDL. GW " X 40" GAP BED TYPE ENGINE LATHE, cam-lock spdl., 8" dia. 3-jaw chuck, spds.: 36 1,800 RPM, inch/ metric thdng., S/N BRIDGEPORT MDL. J VERTICAL TURRET MILL, 9" x 36" table, belt-driven head, spds.: 80 2,720 RPM, spndl. drive motor, S/N KENT MDL. KGS-200 6" X 18" HAND FEED SURFACE GRINDER, new 1998, 6" x 18" perm. magnetic chuck, 6" wheel, coolant system, S/N R ROLL-IN VERTICAL BANDSAW, 11" rd. cap., rolling frame design. (5) SINGLE SPINDLE PEDESTAL DRILL PRESSES, 16" to 20" sizes, by Craftsman, Delta and Jet. (2) FLEXARM PNEUMATIC RIGHT ANGLE DRILLING AND TAPPING MACHINES, mtd. to fabricated steel tables. CUSTOM ROD CUTTER, mtd. to fabricated steel table. MACHINE SHOP ACCESSORIES BRIDGEPORT 12" ROTARY TABLE; (3) BRIDGEPORT MILLING VISES; (2) KURT 6" H.D. MILLING VISES w/swivel bases; (2) SWIFT BINOCULAR MICROSCOPES; TILTING VISE; TRANSFER PUNCHES; TAPPING HEADS; ALORIS QUICKCHANGE TOOLPOSTS; ALORIS QUICKCHANGE TOOLHOLDERS. 5

6 QUINCY 100 HP ROTARY SCREW AIR COMPRESSOR QUINCY 75 HP ROTARY SCREW AIR COMPRESSOR 2003 OLYMPIA DIESEL STAND-BY GENERATOR ROTARY SCREW AIR COMPRESSORS QUINCY MDL. QSI-500ANA31C, 100 HP drive, air cooled, skid mtd., S/N 94850H. QUINCY MDL. QSI 490, approx. 75 HP motor, air cooled, skid mtd., S/N S104ANA3MG/ QUINCY MDL. QB30ACA32SF, 30 HP motor, self-contained, air cooled, noise enclosure, skid mtd. LEROI MDL. CUB30 TANK MOUNTED, 30 HP motor, approx. 90 gal. tank, S/N 4225X376. ATLAS COPCO MDL. GA11FF, new 2001, 15 HP drive motor, 61.2 CFM rated output. ZEKS MDL. 500HSCA400 REFRIGERATED AIR DRYER, S/N STORAGE RACKS (21) INTERLAKE PALLET RACK SECTIONS, 10' ht. x 42" dp. x 96" cross beams x 2-tier; (4) INTERLAKE PALLET RACK SECTIONS, 6' ht. x 42" dp. x 96" cross beams x 2-tier; (29) PALLET RACK SECTIONS, 8' ht. x 42" dp. x 96" uprights x 3-tier, adjustable cross beams; (5) CANTILEVER MATERIAL STORAGE RACKS, 12' uprights, bolt-on design, dbl. sided, adj. arm; CANTILEVER MATERIAL STORAGE RACK, 10' uprights, sgl. sided, 48"L. adj. arm; CANTILEVER MATERIAL STORAGE RACK, 10', 4-uprights, 18"L. adj. arms. WEATHERPROOF IT CABINETS (2) THERMAL INSULATED AIR CONDITIONED UNITS, McClean Mdl. T50 A/C units, dimensions: 77.5" Ht. x 66" L. x 31" W., outdoor, earthquake/hurricane proof. STAND-BY GENERATOR OLYMPIAN MDL. D30P4 DIESEL POWERED, new 2003, Type 2077/1800, 35 KVA, 28 KW rated pwr., 460 v./266 v., 3-phase, 60 cycle, Perkins 3-cylinder diesel engine, S/N OLY00000HNPX MATERIAL HANDLING EQUIPMENT CONDOR MDL. CIN--30RTX SELF-PROPELLED SCISSOR-LIFT, approx. 30' max. platform height, extendable pulpit, battery charger; BIG JOE 1,500 LB. CAP., Mdl. 1056, built-in battery charger, S/N 47544; (3) APEX 2 CU. YD. CAP. SELF-DUMPING HOPPERS, forklift entry; WHIRLRAY METAL FABRICATORS FLAMMABLE STORAGE CABINET; LARGE SELECTION OF ROLLER CARTS OF VARIOUS SIZES AND TYPES; FABRICATED STEEL FRAMES. FORKLIFTS HYSTER 8,000 LB. CAP. MDL. S80XL, new, LPG, 83" standard mast, 122" lift height, cushion tires, side shifter, 42"L. forks, S/N D004D08647X. HYSTER 6,000 LB. CAP. MDL. S60XM, new 2003, LPG, 87" 3-stage mast, 193" lift height, cushion tires, side shifter, 42"L. forks, S/N D187V30547A. TOYOTA 6,000 LB. CAP. MDL. 7FGCU30, new 2001, LPG, 95" 3-stage mast, 216" lift height, cushion tires, side shifter, 42"L. forks, S/N 7FGCU HYSTER 8,000 LB. CAP. FORKLIFT HYSTER 6,000 LB. CAP. FORKLIFT TOYOTA 6,000 LB. CAP. FORKLIFT 6 < WEATHERPROOF IT CABINETS NEED FINANCING FOR YOUR AUCTION PURCHASE? XMI Financial Services is recommended by Logic Metals as a lender for auction purchasers. Please call Rick Wilson using the contact information shown. 618 Church Street, Suite 200, Nashville, TN Phone: (615) Fax: (615) rwilson@xmifinancial.com

7 TEXAS BRAGG GOOSE NECK TANDEM AXLE TRAILER DODGE RAM 1 TON PICKUP FORD F-650 SUPER DUTY BOX TRUCK FORKLIFTS, CONT. YALE 6,000 LB. CAP. MDL. GLC060TGNU- AE084, new, LPG, 84" 3-stage mast, 183" lift height, cushion tires, side shifter, 42"L. forks, S/N E187V15200X. TOYOTA 5,000 LB. CAP. MDL. 7FBCU25, new 2003, 36 v. battery, 83" 3-stage mast, 189" lift height, cushion tires, side shifter, extra valve, 42"L. forks, S/N HYSTER 5,000 LB. CAP. MDL. S50XM, new 2002, LPG, 83" 4-stage mast, 240" lift height, cushion tires, side shifter, 42"L. forks, S/N D187V24829Z. DATSUN 5,000 LB. CAP. MDL. SG105, LPG, 5,000 24" load center, 156" max. lift height, large dia. pneu. tires, S/N SG TOYODA 4,500 LB. CAP. MDL. 7FCU25, LPG, 4,500 24" load center, 189" max. lift height, side shifter, cushion tires, S/N MITSUBISHI 4,000 LB. CAP. MDL. FGC20K, new 2002, LPG, 83" standard mast, 131" lift height, cushion tires, side shifter, 42"L. forks, S/N AF82D YALE 4,000 LB. CAP. MDL. GLC040AFNU- AV058, new, LPG, 58" standard mast, 83" lift height, cushion tires, side shifter, 42"L. forks, S/N A809N09812X. CATERPILLAR 3,500 LB. CAP. MDL. GC18, new 1998, LPG, 83" 3-stage mast, 189" lift height, cushion tires, side shifter, 42"L. forks, S/N 2EM KOMATSU 3,000 LB. CAP. MDL. FG15ST-16, new 1997, LPG, 83" 3-stage mast, 189" lift height, cushion tires, side shifter, 42"L. forks, S/N A. NISSAN 2,600 LB. CAP. ELECTRIC MDL. CUM01L15S, 2,600 24" load center, 188" max. lift height, side shifter, 36 v. battery system, S/N CUM ROLLING STOCK FORD MDL. F-650 SUPER DUTY BOX TRUCK, new 1999, 24' Morgan Mdl. GVSD box, 26,000 lb. G.V.W.R., 6-spd. manual transmission, diesel engine, 148,000 miles, VIN# 3FDNF65A5Y- MAA4610. DODGE RAM MDL LARAMIE SLT 1-TON PICKUP TRUCK, new 1999, 24-valve Cummins turbo diesel engine, 5-spd. standard transmission, 154,000 miles King Cab, aluminum diamond plate toolbox, chrome grill guard w/fog lights, side step rail, leather interior, VIN 1B7MC3368XJ50940, Texas License No. 12DTV5. CHEVROLET EXPRESS MDL /4 TON PANEL VAN, new 2003, sliding side door, dbl. rear entry doors, 75,000 miles, VIN 1GCGG25U , Texas License No. 79VYF1. TEXAS BRAGG 20BPGN 20' GOOSE- NECK TRAILER, new, 9,000 lb. cap. rear elec. winch, (2) 7,000 lb. dual axle, steel bed, 12,000 lb. GVWR, detachable ramps, VIN 17XFG KEARNEY GOOSENECK TRAILER, new 2003, 14,000 lb. GVWR, 16' trailer, rub rails, stake pockets, (2) rear and (1) front landing gears, arranged for pressure washing system w/steel wells, (2) Tem-Tainer 100 gal. cap. polyurethane tanks, VIN 5LCNF OFFICE FURNITURE & EQUIPMENT DESKS; CHAIRS; CREDENZAS; FILE CABI- NETS; ETC. SKI BOAT REGAL 24 OPEN BOW, new 2005 (bought new off showroom floor in 2006), (26 3 with swim platform), 5.7 litre 350 engine, options include through hull exhaust (captains call) and pump out head (never used) boat comes with Road Runner trailer, approximately 50 hours, always dried, stored, covers. REGAL 24 OPEN BOW SKI BOAT 2005 REAL ESTATE FOR SALE OR LEASE BY PRIVATE NEGOTIATION 148,000 SQ. FT. CLASS B INDUSTRIAL WAREHOUSE BUILT IN 1965 with 7.03 acres; zoned MI, Garland TX, 14' 22' clear height; 9 drive ins; 11 dock doors; masonry construction; climate controlled; heavy power (machine tool operation); lot dims: 350 x 875; For more information contact Blake Anderson, Grubb & Ellis Company, CHEVROLET 3/4 TON EXPRESS CARGO VAN 7

8 P.O. Box Houston, TX DATED MATERIAL PLEASE DELIVER LATE MODEL FABRICATION FACILITY Featuring: Amada 2,000 Watt Laser, Finn-Power Turret Press With Sheet Load/Unload System, (3) Amada Turret Presses, Late Model Amada Pressbrakes up to 170 Ton X 13' Capacity, Sheet Metal Sanders, Hardware Insertion Presses, Welding Machinery, Material Handling Equipment, Raw Materials & Hardware, & Much, Much More! PLUS Real Estate for Sale or Lease by Private Negotiation, See Page 7! AUCTION GARLAND, TEXAS PUBLIC INVITED TUESDAY, OCTOBER 7 10:00 A.M. ATTENTION: PLANT MANAGER OR EQUIPMENT BUYER Presorted First Class Mail U.S. Postage PAID Eugene, Oregon Permit No. 305 DIRECTIONS FROM DALLAS/FORT WORTH INTERNATIONAL AIRPORT: Exit airport using north exit. Merge onto I-635 East and proceed approximately 16-1/2 miles. Exit Walnut Hill Lane/Kingsley Road exit, (Exit 13) toward Jupiter Road. Turn left onto Walnut Hill Lane and proceed approximately.6 mile. Make a u-turn at Industrial Lane onto W. Kingsley Road and proceed approximately.2 mile to the auction site, 3233 W. Kingsley Road. Watch for auction signs. LODGING LA QUINTA INN LBJ, Garland, Texas HOLIDAY INN EXPRESS DFW AIRPORT W. John Carpenter Freeway, Irving, Texas SHERATON DFW AIRPORT W. John Carpenter Freeway, Irving, Texas PROXY BIDS If you cannot attend this sale we will bid on your behalf. Contact Houston office at (713) for instructions, or go to our website at NEED FINANCING FOR YOUR AUCTION PURCHASE? XMI Financial Services is recommended by Logic Metals as a lender for auction purchasers. Please call Rick Wilson using the contact information shown. 618 Church Street, Suite 200, Nashville, TN Phone: (615) Fax: (615) rwilson@xmifinancial.com UNABLE TO ATTEND? Bid on-line in real time at TO PARTICIPATE YOU MUST: 1. Register at DO IT NOW. 2. Either wire transfer, or mail a cashier s check deposit in the amount of $3,000 to: Plant & Machinery, Inc., P.O. Box 19100, Houston, TX If you are using FedEx or another delivery service: 2901 W. Sam Houston Pkwy. N., Suite A-130, Houston, TX 77043, (713) You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/ or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON T WAIT. If you need assistance or for wire transfer instructions, don t hesitate to call (713) ALL WEBCAST BIDS ARE SUBJECT TO A 15% BUYER S PREMIUM. A 12% Buyer s Premium Will Apply On-Site. A 15% Buyer s Premium Will Apply to Webcast Bids. See Above Rules for Participation. Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer s Customary Terms of Sale, copies of which will be posted on the premises. ALL PAYMENTS MUST BE MADE BY CASH, CASHIER S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC. Here is an example of what your letter should be: Mr. Customer Name is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $. This letter is good until November 7, In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale. Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser. The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase. Buyer agrees to accept assets purchased AS IS, WITH ALL FAULTS and WITH REMOVAL IP TERMS & CONDITIONS AT BUYER S RISK AND EXPENSE. THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER. The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless form any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance. These terms and conditions may be modified or supplemented by language in the catalog available at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.