Product data Angiographic table

Transcription

1 BAT-F Product data Angiographic table EQUIPMENT DESCRIPTION AND USE Mobile radiographic table with floating and elevating carbon fiber top, featuring manual and motorized movements; suitable to support and position the patient for radiographic examinations of traditional and digital angiography, electrofisiology, minor surgery and pace-makers emplacements. This table can be coupled with ceiling / floor mounted or with mobile C-arms. An ergonomic grip with an incorporated push-button (for brake release) allows easy table top movements in four directions, even when loaded with an heavy patient. Table top braking system works through permanent magnet brakes for maximum safety. Push-buttons controlling brakes and motorized movements are located near the control box grip for a quick and easy use. Acomplete set of accessories is available on request.

2 BAT-F Product data Angiuographic table TECHICAL FEATURES TABLE TOP in carbon fibre LATERAL MOVEMENT Manual LONGITUDINAL MOVEMENT Manual and motorized VERTICAL MOVEMENT Motorized ON BOARD CONTROL PANEL POWER REQUIREMENTS WEIGHT STANDARD COLOUR OF PAINTED PARTS EQUIPMENT IDENTIFICATION according EN Profile Overall lenght Lenght of transparent area Part free from metal structure Overall width Width of transparent area Thickness Absorption in mm Al equivalent Patient s max weight Fixing of the accessories Fixing of the accessories Travel Locking device Manual moving effort (without patient) Travel Locking device Manual moving effort (without patient) Max. cantilever Minimum distance from floor Travel Average speed Manual floating top / brakes release Motorized movements control Single phase line voltage Max absorbed power 90 kg (640 lb) RAL 900 Classification Typology of installation Working mode rectangular (or anatomic on request) 0 cm (8.7 in) 60 cm (6 in), cm (44.6 in) 6,8 cm (4. in) 45,7 cm (8 in), cm (. in) 0,7 (0.08 in) 50 kg (0 lb) on Al lateral rails on carbon fibre top edge ± 4 cm (± 5.5 in) permanent magnet brake 0 N (.5 lb) 00 cm permanent magnet brake 5 N (.7 lb) 60 cm (6 in) 8 cm (. in) 8 cm ( in), cm/s (0.5 in/s) by hand grip / push button by push buttons 0 V 50/60 Hz (5V on request) 80 VA class I type B mobile unit continuous with intermittent load TRANSPORT AND STOCK ENVIRONMENT OPERATING ENVIRONMENT Temperature range 0 C to 50 C ( F to F) Relative humidity range (without condensing) 0% to 90% Atmospheric pressure range 50-0 kpa (7.5 PSI to 5.95 PSI) Temperature range 0 C 40 C (50 F to 04 F) Relative humidity range 0% 75% Atmospheric pressure range 70-0 kpa (0.5 PSI to 5.95 PSI)

3 Product data BAT-F Angiuographic table ACCESSORIES OPTIONS CTA007-A CTA009-A CTA00 CTA004 CTA005 CTA006 CTA008 CTA0 CTA070 CTA0 CTA04 CTA05 CTA0 CTA08 CTA07 CTA04 CTA0 CTA07 CTA06 CTA04 CTA04 CTA044 CTA045 Top foam rubber matress (whole profile) Top foam rubber matress (anatomic profile) Patient arm support (to be completed with accessory fixing clamp CTA0) Flebo support (to be completed with accessory fixing clamp - CTA00 or CTA070) Pair of patient hand grips Set of Velcro belts ECG head support Clamp for accessories fixing to carbon fibre top edge Clamp for accessories fixing to steel lateral rail Shoulder rest Anaesthesia screen support (to be completed with accessory fixing clamp CTA0 or CTA070) Head side patient handle bar Pair of table top lateral extensions Pair of table top lateral extensions 75 x cm Lower body protector Jointed extension of protective shield support arm Removable upper body protector h= 7 cm Removable upper body protector h= 5 cm Patient footrest (complete of clamps for fastening to the lateral bars) 0x5x8 cm headrest cushion Polycarbonate extension for catheters supporting 56x80 cm (table top foot side fixing) Backrest lateral support (table top carbon edge fixing) Pair of legs support (complete of carbon fibre clamps) OPTIONS CTA00 CTA00 CTPA0 Table under-floor fixing frame Table on wheels Table top with anatomic profile

4 Product data BAT-F Angiuographic table FIG. 4 Headrest cushion 0x5x8 cm CTA04 Set of Velcro belts CTA006 Top foam rubber mattress (whole profile) CTA007 4 Pair of patient hand grips CTA005 FIG Anaesthesia screen support (to be completed with accessory fixing clamp CTA0 or CTA070) CTA04 Flebo support (to be completed with accessory fixing clamp - CTA00 or CTA070) CTA004 Clamp for accessories fixing to steel lateral rail CTA070 4 Top foam rubber mattress (whole profile) CTA007 5 Clamp for accessories fixing to carbon fibre top edge CTA0 6 Patient arm support (to be completed with accessory fixing clamp CTA0) CTA00 7 Head side patient handle bar CTA05

5 Product data BAT-F Angiuographic table FIG. 4 Pair of table top lateral extensions CTA0 Top foam rubber mattress (whole profile) CTA007 ECG head support CTA008 4 Clamp for accessories fixing to steel lateral rail CTA070 FIG. 4 Removable upper body protector, h=7 CTA0 * Removable upper body protector, h=5 CTA07 Jointed extension of protective shield support arm CTA04 Lower body protector CTA07 * In the picture the rising of 7 cm is shown.

6 Product data BAT-F Angiographic table ESSE Via Garibaldi 0 40Castelnuovo D.B. (AT) tel fax esse@chierinet.it web :