Instruction Manual Pallet Truck with Load Indicator
|
|
- Howard Davidson
- 5 years ago
- Views:
Transcription
1 Instruction Manual Pallet Truck with Load Indicator Note: Owner/Operator must read and understand this instruction manual before using the pallet truck with scale.
2 Thank you for using this hand pallet truck with load Indicator. For your safety and correct operation of the scale, please read these instructions carefully before using it. NOTE: () All of the information reported herein is based on data available at the moment of printing. The factory reserves the right to modify its own products at any moment without notice and incurring any sanction. So it is suggested to always verify possible updates. () For systems with a printer, the rechargeable batteries must be charged before use, according to the instructions supplied with the batteries.. GENERAL SPECIFICATIONS Model Capacit y Graduation SSS5L 5500 lb 0 lb Weighing Fork size Net Accuracy Length Width over forks Fork Width weight 0 ~ 00lb ±50 lb 00~5500lb ±60lb 0mm 680mm 60mm 9 kg Materials and specifications are subject to change without notice.. TO ATTACH HANDLE TO PUMP UNIT. Take out the handle assembly and then insert it into the pump body.. Take out the axle from the plastic bag.. Insert the axle into one end of the pump body and then connect the pump body and the handle assembly. Pay attention to the position of the hole of the axle and feed the steel wire and pin on rod and chain through the hole of the axle.. Secure the axle with the spring pin..5 Press down the pump rod, and take out the pin..6 Raise the crank link and take out the pin.. TO ADJUST RELEASE DEVICE On the handle of the pallet truck, you will find the control lever (058) which can be set in three positions (See Fig. ): LOWER=to lower the forks; NEUTRAL=to move the load; ASCENT=to raise the forks. After assembling the handle, you can adjust the three positions.. First tighten the setting screw (99) on the crank link (98) until the LOWER position function works.. If the forks elevate while pumping in the NEUTRAL position, turn the setting screw (99) clockwise until pumping the handle does not raise the forks and the NEUTRAL position functions correctly.. If the forks descend while pumping in the NEUTRAL position, turn the setting screw (99) counter-clockwise until the forks do not lower.. If the forks do not descend when the control lever (058) is in the LOWER position, turn the setting screw (99) clockwise until raising the control lever (058) lowers the forks. Then check the NEUTRAL position as per item. and...5 If the forks do not lift while pumping in the ASCENT position, turn the setting screw (99) counter-clockwise until the forks elevate while pumping in the ASCENT position. Then check the NEUTRAL and LOWER position as per item.,. and... MAINTENANCE. Oil Please check the oil level every six months. The volume of oil is about 0.8lt. Restore the fluid in the rubber resevior to 5mm below the top,this must be with the foks in the lowered position. Use the hydraulic type oil according to temperature scale below. Temperature Oil -5 ~+5 L-HM68 Hydraulic oil (equivalent to ISO VG68) -5 ~-5 L-HM6 Hydraulic oil (equivalent to ISO VG6). How to expel air from the pump unit Air may get into the hydraulics during transportation or when a pump is stored upside down. This can prevent the forks from lifting while pumping with the lever in the ASCENT position. The air can be expelled in the following way: Lift the control lever (058) to the LOWER position, then move the
3 handle (05) up and down several times.. Daily check and maintenance Daily check of the pallet truck will limit wear as much as possible. Pay special attention to the wheels (7, F6 or F7), the axles (F, F8, F, F), the handle (05), the forks (F0) and lift and lower control. The forks should be unloaded and lowered in the lowest position when the job is over.. Lubrication Use motor oil or grease to lubricate all moveable parts. 5. GUIDE TO SAFE OPERATION For safe operation of the truck, please read all warning signs and instructions here and on the truck before using this truck. 5. Do not operate the pallet truck unless you are familiar with it and have been trained or authorised to do so. 5. Do not operate the truck unless you have checked its condition. Give special attention to the wheels, the handle assembly, the forks, lift and the lower control. 5. Do not use the truck on sloping ground. 5. Never place any part of your body in the lifting mechanism or under the forks or load. Do not carry passengers. 5.5 The operator should wear gloves and safety shoes for protection. 5.6 Do not handle unstable or loosely stacked loads. 5.7 Do not overload the truck. 5.8 Always place loads centrally across the forks and not at the end of the foks (refer to Fig.). 5.9 The capacity of the truck assumes an evenly distributed load with the centre of the load being at the halfway point of the length of the forks (refer to Fig. ) 5.0 Make sure that length of the forks matches the length of the pallet. 5. Lower the forks to lowest height when the truck is not being used. 5. At other specific conditions or places, the operator should operate the pallet truck carefully. 6. TROUBLESHOOTING NO TROUBLE CAUSE SOLUTION The forks cannot be lifted to max. height. -There is not enough hydraulic oil. - Pour in enough filtered oil. The forks do not lift up. The forks cannot be lowered. -There is no hydraulic oil. -The oil has impurities. -Discharge valve is out of adjustment. -Air in the hydraulic oil. -The rod (90) and the cylinder (96) becomes deformed due to serious unbalanced load. -Component deformation due to unbalanced load. -The forks were kept at high position for long time with rod (0) bared which became rusty. -The setting screw (99) is not in the correct position. Leaks -Seals worn out or damaged. -Some parts may be cracked or worn out. -Pour in more filtered oil. -Change the oil. -Adjust the setting screw (99) (See item.5). -Expel the air (See item.). -Replace the rod (90) or cylinder (96). -Repair or replace component to make it run smoothly. -Remove the rust on the rod (0). Keep the forks at lowered when not in use. -Adjust the setting screw (99) (See item.) -Replace seals with new ones. -Check and replace with new ones. 5 The forks descend -Impurities in the oil cause the -Replace with filtered oil.
4 without lowered. being discharge valve (988) to fail to close. -Air in the oil. -Seals worn or damaged. -Discharge valve (988) is out of adjustment. -Expel the air (See item.). -Replace with new ones. -Adjust the setting screw (99) (See item.). *NOTE: DO NOT ATTEMPT TO REPAIR THE PALLET TRUCK UNLESS YOU ARE TRAINED AND AUTHORIZED TO DO SO. 7. WEIGHING OPERATION 7. Put the control lever in the LOWER position and lower the truck to lowest position. 7. Press the key to turn the system on. After the start-up sequence the indicator will display the weight. 7. Weighing method for gross weight: Reference height Put the control lever in the ASCENT position, pump the handle to make the forks rise until the reference height has been reached. Press the 0 key to set the gross weight to 0. Put the forks under the pallet and check that the load is properly balanced. Put the control lever in the ASCENT position, pump the handle to make the forks rise the reference height has been reached. When the indicator is stable, the gross weight of the goods (total weight of the pallet and the goods) is shown. 7. Weighing method for net weight: To display the weight of the goods without the weight of the pallet (or other container): 7.. Put the control lever in the ASCENT position, pump the handle to make the forks rise until the reference height has been reached. Weigh single standard pallet, for example: weight of pallet: 0kg. 7.. Press the 0 key, the indicator will display 0kg. 7.. Remove the pallet from the forks, the indicator will display -0kg. 7.. Weigh the goods on the pallet as shown in 7., when the indicator is stable, the net weight of the goods is shown. 7.5 Switch between kg and lb. When the weight is shown in kg s, press the lb/kg key shortly and the unit shown will switch to lb. Press the lb/kg key again and the unit shown will switch back to kg. 7.6 Totalling (and printing if optional printer is present) 7.6. Press the Σ to add the weight of the pallet to the total weight. ATTENTION: - Weights below 0kg will not be added and printed (weight and measurement law). - The scale needs to be unloaded before a nd weight can be added to the total Press and hold the Σ key to display the total weight. The weight of the pallet will not be added to total weight.
5 7.6. When the total is shown, press the Σ shortly to reset the total weight to Turn off the Indicator. Press the key until the indicator displays OFF. Releasing the key will turn off the indicator. 8. BATTERY POWER DATA AND REPLACEMENT Step Step Step The indicator on the pallet truck scale uses AA size batteries as power. You are recommended to use alkaline battery. Also you can use rechargeable batteries, which we recommend when there is a printer. Rechargeable batteries need to be charged, according to their own instructions, before they are first used. Change the batteries when is shown in the display. 8. How to change batteries: 8.. Loosen the screws on the battery cover and remove the cover. (Step ) 8.. Replace the AA batteries in the battery holder, taking care to place them in the same direction. (Step ) 8.. Screw the battery cover plate back into position.(step ) 9. TROUBLE SHOOTING OF WEIGHING UNIT NO TROUBLE CAUSE SHOOTING HELP in the -The load is too big for the scale -Remove the load immediately. display Text is not printed -Battery voltage is too low -Charge the batteries. clearly on the ticket Indicator can t be turned on. 5 Battery can t be charged. -Battery voltage is too low. -Battery life is complete. -Charger is damaged. -Battery is damaged. -Charger is damaged. -Charge the batteries. -Replace rechargeable battery with new ones. -Check charger output voltage replace charger with new one. -Replace rechargeable battery with new ones. -Check charger output voltage replace charger with new one. 5
6 Fig. Correct way of lifting the load Fig. Wrong way of lifting the load Correct position of the handle when reading weight Wrong position of the handle when reading weight 6
7 PARTS DRAWING OF PUMP ASSEMBLY A A
8 PARTS LIST OF PUMP ASSEMBLY Part No A Description Q ty Part No. Steel ball 96 Rod 97 Pin 98 Axle 99 Spring pin 90 Screw 9 9 Retaining ring 9 Pressure rod 9 Steel ball 95 Pressure valve body 96 Split ring 97 Retainer Steel needle 95 Pin 957 Pump body Nut 960 Dust cover 96 Braring 96 Retaining ring 97 Rhombus plate 99 Pin 99 Dowel pin 99 Steel ball 99 Discharge valve body 5 Spring 6 7A Retainer 7B Discharge valve shaft 7C Valve taper core 8 Discharge valve shaft 7 Pressure regulating screw Description Scrows Crank link Setting screw Nut Dust proof ring Cylinder Retaining ring Seal ring Parallel pin Spring Retaining cover Spring cover Pump rod (standard) Dust proof ring Retainer Red copper washer Nut Pump cylinder (standard) Seal ring Nylon washer Steering wheel axle Bearing Steering wheel,nylon Steering wheel,polyurethane Steering wheel,rubber Retainer ring Dust cover Q ty 98 Seal assembly (standard):including: 907, 9, 95, 90, 96, 9, 9, 9, 95, 957, 960, 96, 96, 99, 99 8
9 PARTS DRAWING OF HANDLE 050(F) Part No. 050(F) 05(F) PARTS LIST OF HANDLE Description Q ty Part Description No. Handle assembly (square) 058 Control lever Handle 059 Rod and chain Spring pin 060 Rubber cushion Spring leaf 06 Steel roller Spring pin 06 Bushing Nylon roller 06 Bushing Spring pin 06 Shafi Spring pin 065 Spring pin Q ty 9
10 PARTS DRAWING OF FRAME Note*: Quantity for tandem roller is 8, for single roller is. 0
11 PARTS DRAWING OF SCALE ,8,
12 Parts List of scale Item Part No. Description Q ty Item Part No. Description Q ty F6 HLA6000 GB70-85 M6X0 GB95-85 Ø6 GB89. MX8 HLA HLA8000 GB/T67 M8X.5 GB89. M5X6 HLA Complete indicator Indicator seat Cover Tube Nut Plate HLA85000 HLA GB-86 M5 GB95-85 Ø5 GB70-85 M5X65 GB70-85 M5X50 GB70-85 M5X0 GB88-85 Ø5 GB70-85 M6X0 Rule Plate Nut Sensor ASSEMBLY LIST Assembly Description 98 Hydraulic valve assembly 986 Safety valve assembly 987 Lowering screw assembly 988 Lowering valve assembly 995 Standard pump unit piston assembly 996 Standard pump unit 950 Handle assembly L Rhombus plate assembly HA Nylon load roller assembly (tandem type) HB Polyurethane load roller (tandem type) HA Nylon load roller assembly (single type) HB Polyurethane load roller (single type) L Tandem nylon load roller system assembly L Tandem Polyurethane load roller system assembly F Nylon steering wheel assembly F Polyurethane steering wheel assembly F Rubber steering wheel assembly 98 Seal assembly (standard)
13 0. WIRING DIAGRAM OF SCALE, JUNCTION BOX, SENSOR J Connection to indicator board brown Ex- yellow Ex+ white sig- green sig+ J J Connection from load cells green sig+ white sig- red Ex+ black Ex- J6 Connection to touch panel J7 Connection from load cell board brown Ex- white sig- green sig+ yellow Ex+ 5 Sh J8 Connection from power supply black Gnd red +6v J8 Connection to printer red + green TX white RX 5 black CTS 6 yellow RTS
Instruction Manual Pallet Truck with Load Indicator
Instruction Manual Pallet Truck with Load Indicator Note: Owner/Operator must read and understand this instruction manual before using the pallet truck with load indicator. RevA:04/007 Thank you for using
More informationHAND PALLET TRUCK TX SERIES. Note: Owner/Operator must read and understand this instruction. manual before using the hand pallet truck.
Instruction Manual HAND PALLET TRUCK TX SERIES Note: Owner/Operator must read and understand this instruction manual before using the hand pallet truck. Thank you for choosing our pallet truck. For your
More informationInstruction Manual HAND PALLET TRUCK HP SERIES A. Note: Owner/Operator must read and understand this instruction
Instruction Manual HAND PALLET TRUCK HP SERIES A Note: Owner/Operator must read and understand this instruction manual before using the hand pallet truck. Thank you for choosing our pallet truck. For your
More informationPallet Truck with Scale Instruction Manual
Pallet Truck with Scale Instruction Manual 11 Harbor Park Drive Port Washington, NY 11050 Table of Contents General Specifications.............................3 Maintenance......................................4
More informationThank you for choosing our pallet truck. For your safety and correct operation, please carefully read the manual before use.
Thank you for choosing our pallet truck. For your safety and correct operation, please carefully read the manual before use. NOTE: All of the information reported herein is based on data available at the
More informationHand Pallet Truck OPERATION INSTRUCTIONS. Parts List. Note: Owner and operator MUST read and understand these
OPERATION INSTRUCTIONS Parts List Hand Pallet Truck Note: Owner and operator MUST read and understand these operating instructions before using this pallet truck. ATTENTION: 1. The waste packages should
More informationOperating Instructions
Operating Instructions Parts List Hand Pallet Truck Note: Operator MUST read and understand this operating instructions before use this Hand Pallet Truck. Thank you for using our pallet truck. Your pallet
More informationINSTRUCTION MANUAL VESTIL MANUFACTURING CORP. MODELS NUMBER: PM4-xxxx-LP URL:
INSTRUCTION MANUAL FOR Low Profile 4,000 lbs. Pallet Truck MODELS NUMBER: PM4-xxxx-LP VESTIL MANUFACTURING CORP. 2999 NORTH WAYNE STREET, P.O. BOX 507, ANGOLA, IN 46703 TELEPHONE: (260) 665-7586 -OR- TOLL
More information1. GENERAL SPECIFICATIONS 2. TO ATTACH DRAW-BAR TO PUMP UNIT
Thank you for using our pallet truck. Your pallet truck is made of high quality steel and is designed for the horizontal lifting and transport of loads on a pallet or standardized containers on a level,
More informationuline.com
π H-1679 H-2331 PALLET TRUCK SCALE 1-800-295-5510 uline.com Avoid placing the scale in locations that may AFFECT accuracy: 1. Temperature extremes Do not place in direct sunlight or near air conditioning
More informationOperating Instructions
Operating Instructions Parts List Hand Pallet Truck PJ4400-2748-ACL Note: Operator MUST read and understand this operating instructions before use this Hand Pallet Truck. Thank you for using our pallet
More informationOperating Instructions Parts List
Operating Instructions Parts List FH1025-SMS-001_EN Hand Stacker 1.0T/2.5M Note: Owner and operator MUST read and understand this operating instructions before use this hand stacker. Date:March, 2012 Welcome
More informationGENERAL INFORMATION AVOID PLACING THE SCALE IN LOCATIONS THAT MAY AFFECT ACCURACY:
π H-4564 PALLET TRUCK SCALE WITH PRINTER 1-800-295-5510 uline.com AVOID PLACING THE SCALE IN LOCATIONS THAT MAY AFFECT ACCURACY: 1. Temperature extremes Do not place in direct sunlight or near air conditioning
More informationThe Specification EA15 Series Semi-Electric Stacker Note: Before using must read this manual and the various warning label!
The Specification EA15 Series Semi-Electric Stacker Note: Before using must read this manual and the various warning label! EKKO Material Handling Equipment Manufacturing, Inc. Contents Preface... - 2-1.
More informationWESCO INDUSTRIAL PRODUCTS, INC. Scale Pallet Truck. Part Number: &
WESCO INDUSTRIAL PRODUCTS, INC Scale Pallet Truck Part Number: 272936 & 272938 Note: Operator MUST read and understand these operating instructions before using this Hand Pallet Truck. Page 1 of 16 TABLE
More informationHand Pallet Truck 2.5 tons
For your safety Please read this instruction manual before you use the Hand Pallet Truck! Contents: Part List and Instruction Model.: XTN 540-1150 Please keep these instructions for future reference. Hand
More informationOperating Instructions Parts List
Operating Instructions Parts List SPN0 Semi-Electric Stacker Note:Owner and Operator MUST read and understand this operating instructions before use this stacker. Welcome to use our half-electric stacker
More informationHYDRAULIC PALLET TRUCK MODEL NO: PT540M/BM/CM & PT685BM/CM PART NO: , , , ,
HYDRAULIC PALLET TRUCK MODEL NO: PT540M/BM/CM & PT685BM/CM PART NO: 7631700, 7631705, 7631710, 7631715, 7631720 OPERATION & MAINTENANCE INSTRUCTIONS LS0316 INTRODUCTION Thank you for purchasing this CLARKE
More informationInstruction Manual. High Lift Hand Truck
Instruction Manual High Lift Hand Truck Note: The Owner/Operator must read carefully and understand all the information presented here before operation. CONTENT 1. Specification. 2 2. Safety Instructions...
More informationInstruction Manual For Auto Shift Hydraulic Lift Table
Instruction Manual For Auto Shift Hydraulic Lift Table Model Number: CART-550-AS Note: Owner/Operator must read and understand this Instruction Manual before operating the lift & tilt table. Contents 1
More informationWESCO INDUSTRIAL PRODUCTS, INC. Heavy Duty Semi Electric Pallet Truck. Part Number:
WESCO INDUSTRIAL PRODUCTS, INC Heavy Duty Semi Electric Pallet Truck Part Number: 273289 Note: Operator MUST read and understand these operating instructions before using this Hand Pallet Truck. Table
More information1. WARNINGS 3. DAILY INSPECTION
Thank you for using this lift table. Your lift table is made of high quality steel and is designed for the horizontal lifting and transport of loads on a level, fixed base. For your safety and correct
More information4400-Lb. Capacity Pallet Jack
Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item#
More informationWESCO INDUSTRIAL PRODUCTS, INC. Deluxe Foot Pump Fork Pallet Truck. Part Number:
WESCO INDUSTRIAL PRODUCTS, INC Deluxe Foot Pump Fork Pallet Truck Part Number: 272766 Note: Operator MUST read and understand these operating instructions before using this Hand Pallet Truck. TABLE OF
More informationHand Pallet Truck NC. Operation Manual
Hand Pallet Truck -------NC Operation Manual Operation Manual 1 Application Range This product is suitable for using in rated load of up to 5500lbs. This PL5500HD is the perfect jack for handling palletized
More informationWESCO INDUSTRIAL PRODUCTS, INC. Manual Non Telescoping High Lift Truck. Part Number: &
WESCO INDUSTRIAL PRODUCTS, INC Manual Non Telescoping High Lift Truck Part Number: 272462 & 272463 Note: Operator MUST read and understand these operating instructions before using this Truck. TABLE OF
More informationHYDRAULIC PALLET TRUCK. MODEL No: PTE550 PART Nos OPERATION & MAINTENANCE INSTRUCTIONS
HYDRAULIC PALLET TRUCK MODEL No: PTE550 PART Nos 7630171 OPERATION & MAINTENANCE INSTRUCTIONS 0604 Please read these instructions carefully before operating the truck Thank you for purchasing this CLARKE
More information5,500 lbs. Pallet Jack
5,500 lbs. Pallet Jack ATD-7406 Operating Instructions & Parts Manual Capacity 5,500 lbs.! The safety alert symbol is used to alert you to potential personal injury hazards. Obey all safety messages that
More informationHYDRAULIC PALLET TRUCKS
HYDRAULIC PALLET TRUCKS HYDRAULIC PALLET TRUCKS MODEL Nos: PT550 GAL & PT685 GAL PART Nos: 7630234 & 7630236 OPERATION & MAINTENANCE INSTRUCTIONS 0204 Please read these instructions carefully before operating
More information4400-Lb. Capacity Extra-Long Pallet Jack
4400-Lb. Capacity Extra-Long Pallet Jack Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic
More informationHYDRAULIC PALLET TRUCK
HYDRAULIC PALLET TRUCK Models; PT550C & PT685C Part Nos 7630172 & 7630177 OPERATING & MAINTENANCE INSTRUCTIONS GC05/12 INTRODUCTION Thank you for purchasing this CLARKE Pallet Truck. Before attempting
More informationINSTRUCTION MANUAL HYDRAULIC STACKER
INSTRUCTION MANUAL HYDRAULIC STACKER Model:TF40 1. Brief Instruction I. Use & applicable range It is a convertible vehicle using for lifting and transporting in workshop, warehouse and wharf, etc. Its
More informationHydraulic Hand Pallet Trucks
Operating Instructions & Parts Manual 12U124 Please read and save these instructions. Read carefully before attempting to assemble, install, operate, or maintain the product described. Protect yourself
More informationBFQ Hand Pallet Truck -Quick Lift Operation Manual
BFQ Hand Pallet Truck -Quick Lift Operation Manual Original instruction Ningbo Ruyi Joint Stock Co.,Ltd 656 North Taoyuan Road, Ninghai 315600,Zhejiang,P.R. China EC Declaration of Conformity According
More informationWESCO INDUSTRIAL PRODUCTS, INC. Folding Handle Scissors Lift Table. Part Number: &
WESCO INDUSTRIAL PRODUCTS, INC Part Number: 260207 & 260208 Note: Operator MUST read and understand these operating instructions before using this. TABLE OF CONTENTS General Information... 2. Description...
More informationInstruction Manual. Hydraulic Jack. Note: The Owner/Operator must read carefully and understand all the information presented here before operation.
Instruction Manual Hydraulic Jack Note: The Owner/Operator must read carefully and understand all the information presented here before operation. 0 Contents 1 Warning in advance 2 2 Description.. 2 3
More informationELECTRIC LIFTER TROLLEY INSTRUCTION MANUAL
ELECTRIC LIFTER TROLLEY INSTRUCTION MANUAL Imported exclusively by Pacific Hoists Pty. Ltd. & Pacific Hoists Ltd. In support of cancer charities in Australia & New Zealand 2 www.jbstools.com WWW.CHALLENGERHOISTS.COM.AU
More informationOPERATORS MANUAL/INSTRUCTIONS/PARTS & SERVICE FOR MANUAL & ELECTRIC
OPERATORS MANUAL/INSTRUCTIONS/PARTS & SERVICE FOR MANUAL & ELECTRIC TABLE OF CONTENTS SAFETY DELIVERY INSPECTION OPERATION 4 MAINTENANCE 5 TROUBLE SHOOTING 5 PARTS 6-15 Frame Scissor Assembly 6-7 Thrust
More informationWESCO INDUSTRIAL PRODUCTS, INC. Heavy Duty Scissors Lift Tables. Part Number: &
WESCO INDUSTRIAL PRODUCTS, INC Part Number: 272970 & 272973 Note: Operator MUST read and understand these operating instructions before using this Heavy Duty Scissors Lift Table. TABLE OF CONTENTS 1 General
More informationOPERATION MANUAL. Note: Owner and operator MUST read and understand the operating instructions before using the Hand Pallet Truck. Date:2014.
OPERATION MANUAL Note: Owner and operator MUST read and understand the operating instructions before using the Hand Pallet Truck. Date:2014.07 1 MLX55 SERVICE CHECK LIST OPERATION A. With control lever
More informationASSEMBLY & OPERATION INSTRUCTION MANUAL
Sliding Bridge Jack 3,500 lbs. Capacity ASSEMBLY & OPERATION INSTRUCTION MANUAL TABLE OF CONTENTS Specifications... 2 Description & Features... 3 Installation Instructions... 4 Safety Instructions... 4
More informationOPERATION&SERVICE MANUAL MODEL:H10J MANUAL STACKER
OPERATION&SERVICE MANUAL MODEL:H0J MANUAL STACKER Eoslift Automation Technology Corp. No., Yanjia Road, Yuantong Town, Haiyan, Zhejiang CONTENTS.Structural Data Form EJ(Single frame) Structural Data Form
More informationWESCO INDUSTRIAL PRODUCTS, INC. Folding Handle Scissors Lift Table. Part Number:
WESCO INDUSTRIAL PRODUCTS, INC Folding Handle Scissors Lift Table : 260201 Note: Operator MUST read and understand these operating instructions before using this Folding Handle Scissors Lift Table. TABLE
More informationOwner s Manual, Operating Instructions Manual, and Replacement Parts Manual. Lift-Rite Hand Pallet Trucks Model SS45
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Hand Pallet Trucks Model SS45 This publication, 1188027A, applies to the Lift-Rite Hand Pallet Truck, Model SS45 and
More informationUSER MANUAL PT-450. Please take time to read these instructions before starting to use the scale. Version /17
USER MANUAL PT-450 Please take time to read these instructions before starting to use the scale Version 1.0 08/17 Contents Product Specification 3 Safety Instructions 4 Loading & Moving Guidance 5 Before
More informationOwner s Manual, Operating Instructions Manual, and Replacement Parts Manual. Lift-Rite Hand Pallet Trucks Model PST Plus
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Hand Pallet Trucks Model PST Plus This publication, 1269849/001B, applies to the Lift-Rite Hand Pallet Truck, Model
More informationInstruction Manual Standard (MJ484-MJ489) and Heavy Duty (MJ490-MJ495) Hydraulic Hand Pallet Truck
Instruction Manual Standard (MJ484-MJ489) and Heavy Duty (MJ490-MJ495) Hydraulic Hand Pallet Truck 9008-08/15/07 Warning! Read and understand the entire operator s manual before using the pallet truck.
More informationPage 1 Instructions Manual for LTH-500 (J055)23/06/201 INSTRUCTION MANUAL. LTH-500 Hydraulic Lifter Trolley 500kg Load Capacity J055
Page 1 Instructions Manual for LTH-500 (J055)23/06/201 INSTRUCTION MANUAL LTH-500 Hydraulic Lifter Trolley 500kg Load Capacity J055 Page 2 Instructions Manual for LTH-500 23/06/201 (J0 SP300 / SPA300 SP500
More informationThe RCS-6V kit. Page of Contents. 1. This Book 1.1. Warning & safety What can I do with the RCS-kit? Tips 3
The RCS-6V kit Page of Contents Page 1. This Book 1.1. Warning & safety 3 1.2. What can I do with the RCS-kit? 3 1.3. Tips 3 2. The principle of the system 2.1. How the load measurement system works 5
More informationOwner s Manual, Operating Instructions Manual, and Replacement Parts Manual. Lift-Rite Titan Series Hand Pallet Trucks Model LCF55 - Freezer Special
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Titan Series Hand Pallet Trucks Model LCF55 - Freezer Special Lift-Rite, 5975 Falbourne Street, Mississauga, Ontario
More informationAIR/HYDRAULIC LIFT TABLE CART 770-LB.
AIR/HYDRAULIC LIFT TABLE CART 770-LB. OWNER S MANUAL WARNING: Read carefully and understand all MACHINE ADJUSTMENT AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other
More informationINSTRUCTION MANUAL ALL TERRAIN PALLET TRUCK HAND PALLET TRUCK
INSTRUCTION MANUAL ALL TERRAIN PALLET TRUCK HAND PALLET TRUCK WARNING! 1. Read and understand instruction manual before using the pallet truck. 2. Do not place hands or feet under the pallet truck at any
More informationVESTIL MANUFACTURING CORP. OPERATION & SERVICE MANUAL PORTABLE DRUM JACK (DRUM-55-S) 2999 NORTH WAYNE STREET, P.O. BOX 507, ANGOLA, IN 46703
OPERATION & SERVICE MANUAL PORTABLE DRUM JACK (DRUM-55-S) VESTIL MANUFACTURING CORP. 2999 NORTH WAYNE STREET, P.O. BOX 507, ANGOLA, IN 46703 TELEPHONE: (260) 665-7586 -OR- TOLL FREE (800) 348-0868 FAX:
More informationMANUAL LIFTER TROLLEY INSTRUCTION MANUAL
MANUAL LIFTER TROLLEY INSTRUCTION MANUAL Imported exclusively by Pacific Hoists Pty. Ltd. & Pacific Hoists Ltd. In support of cancer charities in Australia & New Zealand 2 www.jbstools.com WWW.CHALLENGERHOISTS.COM.AU
More informationOWNER S MANUAL EPT-55 ! WARNING! HAND PALLET TRUCK
HAND PALLET TRUCK EPT-55 OWNER S MANUAL! WARNING! DO NOT OPERATE OR SERVICE THIS PRODUCT UNLESS YOU HAVE READ AND FULLY UNDERSTOOD THE ENTIRE CONTENTS OF THIS MANUAL. FAILURE TO DO SO MAY RESULT IN PROPERTY
More informationOperator Manual. The most important component is you. This operator manual. has information for. all models of series. B plus some options and
Operator Manual This operator manual has information for all models of series B plus some options and accessories. Some of the illustrations and information may not apply to your truck. The most important
More informationMaxx-Mini Lift MMLE-50D Service Manual
Maxx-Mini Lift MMLE-50D Service Manual LIFT PRODUCTS INC PO BOX 349 ELM GROVE WI 53122 262-521-5720 FAX 262-521-5725 Toll Free 877-543-8776 Model: MMLE-50D S/N Customer REGISTRATION INFORMATION (To validate
More informationOn-A-Roll Lifter Instruction Manual for Standard Models Read Before Use!
On-A-Roll Lifter Instruction Manual for Standard Models Read Before Use! Important instructional, safety and precautionary information! It is the user s responsibility to exercise good judgment, common
More informationInstruction Manual. Note: Owner/Operator must read and understand this instruction
Instruction Manual HEX300 HEX500 Note: Owner/Operator must read and understand this instruction manual before using the table. Lift Table HEX Series HEX300, HEX500 Operation and Service Manual BEFORE OPERATING
More informationELECTRIC PALLET TRUCK
π H-3405 ELECTRIC PALLET TRUCK 1-800-295-5510 uline.com GENERAL SAFETY GUIDELINES WARNING! Do not operate this truck unless you have been trained to use it, authorized to do so and have checked it is in
More informationRacing Jack Max. Capacity: 3,000 lbs. (1,361 kg)
R SPX Corporation 655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales:
More informationInstruction Manual MJ520 Mobile Hydraulic Scissor Lift Table 770 lbs. (350 kg)
Instruction Manual MJ520 Mobile Hydraulic Scissor Lift Table 770 lbs. (350 kg) WARNING! Read this operation manual carefully and understand fully the operating instructions. Improper use of this unit could
More informationHAND PALLET TRUCKS OPERATORS MANUAL INSTRUCTION MANUAL PARTS & SERVICE
LOW PROFILE TRUCKS HAND PALLET TRUCKS OPERATORS MANUAL INSTRUCTION MANUAL PARTS & SERVICE UNIQUE CAPACITY/APPLICATION OPTIONS AND ACCESSORIES W ARRANTY EXCLUSIVE year hydraulic pump Model LR0655 Hand Pallet
More informationInstruction Manual. BS Series
Instruction Manual BS Series NOTE: Owner/Operator must read and understand this instruction manual before using the lift table. RevB: 02/2009 1 Operation and Service Manual BEFORE OPERATING THE LIFT TABLE,
More informationMODEL H6287-H6289 PALLET JACKS INSTRUCTIONS
MODEL H6287-H6289 PALLET JACKS INSTRUCTIONS Specifications Model H6287 H6288 H6289 Capacity Overall Fork Dimensions Individual Fork Width Minimum Fork Height Maximum Fork Height 1,000 Lbs. 4,000 Lbs. 5000
More informationOWNER S MANUAL FPT-55 ! WARNING! HAND PALLET TRUCK
HAND PALLET TRUCK FPT-55 OWNER S MANUAL! WARNING! DO NOT OPERATE OR SERVICE THIS PRODUCT UNLESS YOU HAVE READ AND FULLY UNDERSTOOD THE ENTIRE CONTENTS OF THIS MANUAL. FAILURE TO DO SO MAY RESULT IN PROPERTY
More informationOwner s Manual, Operating Instructions Manual, and Replacement Parts Manual
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Titan Series Hand Pallet Trucks Models LCR55 and LCS55 Versions This publication, 1130442C, applies to the Lift-Rite
More informationWARNING. Electric Recovery Winch. General Safety Precautions
1 Electric Recovery Winch Thanks for purchasing a WINCH. This manual covers operation and maintenance of the winch. All information in this publication is based on the latest production information available
More informationInstruction Manual ELECTRIC LIFT TABLE. Model:ES50LB ES100L
Instruction Manual ELECTRIC LIFT TABLE Model:ES50LB ES100L Note: Owner/Operator must read and understand this instruction Manual before using the lift & tilt table. ELECTRIC LIFT TABLE Model ES50LB ES100L
More informationOPERATOR S MANUAL EPT-55 HAND PALLET TRUCK WARNING
OPERATOR S MANUAL EPT-55 HAND PALLET TRUCK ACTUAL PRODUCT MAY NOT APPEAR EXACTLY AS SHOWN WARNING Do not operate or service this product unless you have read and fully understand the entire contents of
More informationInstruction Manual BS50D
Instruction Manual BS50D NOTE: Owner/Operator must read and understand this instruction manual before using the lift table. 1 Operation and Service Manual BEFORE OPERATING THE LIFT TABLE, READ THIS MANUAL
More informationHeavy Duty Engine Cranes
Heavy Duty Engine Cranes Operating Instructions & Parts Manual Model Number ATD-7484 ATD-7485 (Foldable Legs) Capacity 2 Ton 2 Ton Model ATD-7484 Model ATD-7485 WARNING: This product may contain chemicals,
More information1. Introduction Specifications Operation Guide Trouble shooting Note... 13
Content 1. Introduction...1 Notice...1 Safety Guide...1 2. Specifications...2 Features...2 Specifications...3 Capacity and Resolution...4 Schematic Diagram...4 Dimension...5 3. Operation Guide...6 Power
More information3,000 lb Aluminum Floor Jack. Owner s Manual
8032021 3,000 lb Aluminum Floor Jack Owner s Manual Specifications Max. Capacity: 3,000 lb Saddle Height: 3-1/2" to 17-3/4" max Hydraulic Lift: 14-1/4" Overall Dimensions:??? Weight: 42 lbs Handle:???
More informationOWNER S MANUAL Model MH1930
OWNER S MANUAL Model MH1930 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Extreme Hydraulic Lift Cart CAUTION: Read, understand and follow ALL instructions before
More informationFOR PREMIUM SCISSOR LIFT CARTS MODELS COVERED: CART-300-S-FR, CART-300-D-FR, CART-600-S-FR, CART-600-D-FR, CART-1000-S-FR, CART-1000-D-FR
INSTRUCTION MANUAL FOR PREMIUM SCISSOR LIFT CARTS MODELS COVERED: CART-300-S-FR, CART-300-D-FR, CART-600-S-FR, CART-600-D-FR, CART-1000-S-FR, CART-1000-D-FR Note: Owner/Operator must read and understand
More informationSTACKER INSTRUCTION MANUAL
STACKER INSTRUCTION MANUAL The Mobile Stackers are lifting devices featuring easy, flexible, reliable and safe operation suitable for transportation of loads in such applications as warehouses, manufacturing
More informationMODEL TON HYDRAULIC FLOOR JACK
MODEL 66510 10 TON HYDRAULIC FLOOR JACK USER'S MANUAL *This hydraulic jack conforms to all "ANSI / ASME" safety standards. Jackco Transnational Inc. 2010 South El Monte, CA 888-452-2526 To see more jackco
More informationMODEL TON HYDRAULIC FLOOR JACK
MODEL 66500 5 TON HYDRAULIC FLOOR JACK USER'S MANUAL *This hydraulic jack conforms to all "ANSI / ASME" safety standards. Jackco Transnational Inc. 2010 South El Monte, CA 888-452-2526 To see more jackco
More informationModel 289F. Operator s Manual for Morse Model 289F. MORStak TM Forklift-Mounted Drum Racker. The Specialist In Drum Handling Equipment
Contents Page Receiving Procedures.................... 1 Warranty............................. 1 Safety Information..................... 1-2 Machine Description................... 3 Operating Instructions....................
More informationATV WINCH. Thank you for purchasing a
1 2 ATV WINCH Thank you for purchasing a Winch. This manual covers operation and maintenance of the winch. All information in this publication is based on the latest production information available at
More informationOperator s Manual. Nitro 1000 Nitro 1000X. Nitro 750 Nitro 750X. September REV0
Operator s Manual Nitro 750 Nitro 750X Nitro 1000 Nitro 1000X September.27.2018REV0 Table of Contents Introduction...3 Safety.....4 Equipment Requirements......5 What You Have Received. 5 Serial Number...6
More informationOwner s Manual, Operating Instructions Manual, and Replacement Parts Manual
Owner s Manual, Operating Instructions Manual, and Replacement Parts Manual Lift-Rite Titan Series Hand Pallet Trucks Models LCM50, LCU50, and Four-Way Versions This publication, 114374C, applies to the
More informationSelf-Recovery Winch WARNING. General Safety Precautions
1 Self-Recovery Winch Thank you for purchasing a Winch. This manual covers operation and maintenance of the winch. All information in this publication is based on the latest production information available
More informationInstruction Manual FM180. NOTE: Owner/Operator must read and understand this instruction manual before using the mover.
Instruction Manual FM180 NOTE: Owner/Operator must read and understand this instruction manual before using the mover. Contents 1. Application 2. Specifications 3. Assembly 4. Precautions and Preparation
More information100 Ton Shop Press Operating Instructions
S U P E R D U T Y 100 Ton Shop Press Operating Instructions MOD NO. 859SD Hazard Symbols Used in the Manual This manual includes the hazard symbols defined below when the operations or maintenance job
More informationOperator Manual. This operator manual has. information for all models. of series M plus some. options and accessories. Some of the illustrations
M S E R I E Operator Manual S This operator manual has information for all models of series M plus some options and accessories. Some of the illustrations and information may not The most apply to your
More informationI. Safety Requirement WARNING. ATV/UTV Winch
1 2 ATV/UTV Winch Thank you for purchasing a COMEUP Winch. This manual covers operation and maintenance of the winch. All information in this publication is based on the latest production information available
More informationI-317. AWWA Check Valves WARNING INSTALLATION AND MAINTENANCE INSTRUCTIONS SERIES 317 WARNING
Read and understand all instructions before attempting to install, remove, adjust, or perform maintenance on any Victaulic piping products Wear safety glasses, hardhat, and foot protection. Failure to
More informationHeavy Duty Hoist WARNING. General Safety Precautions. Thank you for purchasing a
Heavy Duty Hoist Thank you for purchasing a Hoist. This manual covers operation and maintenance of the hoist. All information in this publication is based on the latest production information available
More informationInstruction Manual. Forklift-Karrier
Instruction Manual Forklift-Karrier Note: The Owner/Operator must read carefully and understand all the information presented in this manual before using this device. - 0 - Contents 1. Figure and Parameter
More informationAir / Hydraulic Under Axle Jack
655 Eisenhower Drive Owatonna, MN 55060-0995 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales: (507) 455-7223
More informationHeavy Duty Engine Cranes
Heavy Duty Engine Cranes Operating Instructions & Parts Manual Model Number Atd-7484 Atd-7485 (Foldable Legs) Capacity 2 Ton 2 Ton Model Atd-7484 Model Atd-7485 Atd Tools Inc. 160 Enterprise Drive, Wentzville,
More informationTable of Contents. AMO series quantitative pressured centralized lubricating system 1. Illustration of AMO motor driven lubricating system 1
Table of Contents AMO series quantitative pressured centralized lubricating system 1 Illustration of AMO motor driven lubricating system 1 AMO motor driven thin oil lubricating pump MO type pressured thin
More informationHydraulic Furniture Movers
Hydraulic Furniture Movers Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationHEAVY DUTY TROLLEY JACK. Operation Manual
HEAVY DUTY TROLLEY JACK 4T Operation Manual Make sure to read and fully understand the instruction manual before using this product and keep the manual properly 1 General Description Product Description
More informationForklift & Tractor Jack
Forklift & Tractor Jack 10435 4 Ton Capacity ASSEMBLY & OPERATION INSTRUCTIONS SAVE THESE INSTRUCTIONS. For your safety and the safety of others around you, read carefully before attempting to install,
More informationMODEL EGA200 OWNERS MANUAL
3/8 RATCHET WRENCH MODEL EGA200 OWNERS MANUAL www.eaglecompressor.com 1-800-551-2406 READ THE ENTIRE MANUAL BEFORE PUTTING THIS TOOL IN SERVICE Limited Air Tool Warranty Wood Industries, Inc. warrants
More informationPALLET TRUCK PAINTED OPERATING INSTRUCTIONS MAINTENANCE MANUAL PARTS CATALOGUE DECLARATIONS OF CONFORMITY
ORIGINAL INSTRUCTIONS TRANSLATED ENGLISH EDITION, VERSION 01, APPLICABLE FROM 1 OCTOBER 1998 PALLET TRUCK PAINTED OPERATING INSTRUCTIONS MAINTENANCE MANUAL PARTS CATALOGUE DECLARATIONS OF CONFORMITY 192.810-E01
More information500kg TELESCOPIC TRANSMISSION LIFTER
Product Code: 2056T PRODUCT CODE: 2056T 500kg TELESCOPIC TRANSMISSION LIFTER Safe Working Capacity 500kg Base Dimension 540 x 570 mm Minimum Height 1175mm Maximum Height 1900mm Made in China to TQB Brands
More information