Bermad Water Technologies ABN
|
|
- Elmer Cole
- 5 years ago
- Views:
Transcription
1 SAI Global hereby grants: ABN Inglewood Drive, Thomastown, VIC 307, Australia WaterMark Certificate of Conformity Level 1 Evaluated to: AS Hydraulically automatic control valves for waterworks purposes the WaterMark Licensee the right to use or arrange the use of the WATERMARK as shown below only in respect of the goods described and detailed on the product schedule identified on wwwsaiglobalcom which are produced by the WaterMark Licensee or on behalf of the WaterMark Licensee* and which comply with the appropriate Standard referred to above as from time to time amended The Licence is granted subject to the rules governing the use of the WATERMARK and the Terms and Conditions for certification The WaterMark Licensee covenants to comply with all the Rules and Terms and Conditions Certificate No: WMK25537 Issued : 11 November 2013 Originally Certified : 1 October 2013 Expires : 30 September 2018 Current Certification : 11 November 2013 Paul Butcher Global Head Assurance Services Samer Chaouk Head of Policy, Risk and Certification The WATERMARK is a registered certification trademark of Standards Australia Limited (ACN ) and is issued under licence by SAI Global Certification Services Pty Limited (ACN ) ( SAI Global ) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 This certificate remains the property of SAI Global and must be returned to SAI Global upon its request Refer to wwwsaiglobalcom for the list of product models
2 SAI Global hereby grants : 7 Inglewood Drive, Thomastown, VIC 307, Australia WaterMark Certificate of Conformity Level 1 Evaluated to: AS Hydraulically automatic control valves for waterworks purposes Model identification of the goods on which the WATERMARK may be used: Model is by a solenoid is by two two-way solenoid s reduces high inlet to a lower outlet by pressurereducing inlet by pressure sustaining A special type of pressurerelief valve, used to protect pumping stations and pipelines under a sudden pump stopping condition (eg, due to power failure) Type Single Solenoid Dual Solenoid Fixed Outlet Reducing Sustaining Surge Anticipating Size (DN) PN PN PN PN PN Certificate No: WMK25537 Issued : 11 November 2013 The WATERMARK is a registered certification trademark of Standards Australia Limited (ACN ) and is issued under licence by SAI Global Certification Services Pty Limited (ACN ) ( SAI Global ) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 This certificate remains the property of SAI Global and must be returned to SAI Global upon its request Refer to wwwsaiglobalcom for the list of product models 3 Page 1 of 2
3 Model 73Q inlet by pressure relief The valve controls the operation of booster pumps and allows flow in only one direction controls level into a tank by float-controlled, in order to maintain the range controls level into a tank by float-controlled, in order to maintain the range controls level into a reservoir by means of an altitude, in order to maintain the range maintains the flow set-point, irrespective of any variation of inlet or outlet pressure, by rate-of-flow Type Relief Pump Level (Pilot Type 60) Level (Pilot Type 66) Altitude Rate-of-flow Size (DN) PN PN PN PN PN PN End of Record Certificate No: WMK25537 Issued : 11 November Registered by: The WATERMARK is a registered certification trademark of Standards Australia Limited (ACN ) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 and is issued under licence by SAI Global Certification Services Pty Limited (ACN ) ( SAI Global ) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 This certificate remains the property of SAI Global and must be returned to SAI Global upon its request Refer to wwwsaiglobalcom for the list of product models 3 Page 2 of 2
4 SAI Global hereby grants: ABN Inglewood Drive, THOMASTOWN, VIC 307, Australia StandardsMark Licence Manufactured to: AS Hydraulically automatic control valves for waterworks purposes "the StandardsMark Licensee" the right to use the STANDARDSMARK as shown below only in respect of the goods described and detailed in the Schedule which are produced by the Licensee or on behalf of the Licensee* and which comply with the appropriate Standard referred to above as from time to time amended The Licence is granted subject to the rules governing the use of the STANDARDSMARK and the Terms and Conditions for certification and licence The Licensee covenants to comply with all the Rules and Terms and Conditions Licence No: SMKP22015 Issued : ember Originally Certified : ember Expires : 20 November 2016 Current Certification : ember Duncan Lilley Global Head Assurance Services Alex Ezrakhovich General Manager Certification Services Page 0 of 3 The STANDARDSMARK is a registered certification trademark of SAI Global Limited (ACN ) and is issued under licence by SAI Global Certification Services Pty Limited (ACN ) ( SAI Global ) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 This certificate remains the property of SAI Global and must be returned to SAI Global upon its request Refer to wwwsaiglobalcom, for the list of product models
5 SAI Global hereby grants: 7 Inglewood Drive, THOMASTOWN, VIC 307, Australia StandardsMark Licence Manufactured to: AS Hydraulically automatic control valves for waterworks purposes Model identification of the goods on which the STANDARDSMARK may be used: Model is by a solenoid is by two twoway solenoid s reduces high inlet to a lower outlet by pressurereducing inlet by pressure sustaining Type Single Solenoid Dual Solenoid Fixed Outlet Reducing Sustaining Size (DN) AS3688 AS3688 AS3688 AS3688 AS AS AS AS Licence No: SMKP22015 Issued : ember The STANDARDSMARK is a registered certification trademark of SAI Global Limited (ACN ) and is issued under licence by SAI Global Certification Services Pty Limited (ACN ) ( SAI Global ) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 This certificate remains the property of SAI Global and must be returned to SAI Global upon its request Refer to the Schedule for the list of product models Page 1 of 3
6 Model 7 73Q A special type of pressurerelief valve, used to protect pumping stations and pipelines under a sudden pump stopping condition (eg, due to power failure) inlet by pressure relief The valve controls the operation of booster pumps and allows flow in only one direction controls level into a tank by floatcontrolled, in order to maintain the water level within a set range controls level into a tank by floatcontrolled, in order to maintain the water level within a set range Type Surge Anticipating Relief Pump Level (Pilot Type 60) Level (Pilot Type 66) Size (DN) AS3688 AS3688 AS3688 AS3688 AS3688 AS AS AS AS AS Licence No: SMKP22015 Issued : ember The STANDARDSMARK is a registered certification trademark of SAI Global Limited (ACN ) and is issued under licence by SAI Global Certification Services Pty Limited (ACN ) ( SAI Global ) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 This certificate remains the property of SAI Global and must be returned to SAI Global upon its request Refer to the Schedule for the list of product models Page 2 of 3
7 Model controls level into a reservoir by n altitude, in order to maintain the range maintains the flow setpoint, irrespective of any variation of inlet or outlet pressure, by rate-of-flow Type Altitude Rate-of-flow Size (DN) AS3688 AS3688 AS AS End of Record Licence No: SMKP22015 Issued : ember The STANDARDSMARK is a registered certification trademark of SAI Global Limited (ACN ) and is issued under licence by SAI Global Certification Services Pty Limited (ACN ) ( SAI Global ) 286 Sussex Street, Sydney NSW 2000, GPO Box 520 Sydney NSW 2001 This certificate remains the property of SAI Global and must be returned to SAI Global upon its request Refer to the Schedule for the list of product models Page 3 of 3
CERTIFICATE OF CONFORMITY
CERTIFICATE OF CONFORMITY This is to certify that Product Description, Purpose or Use Polyethylene (PE) pipes for pressure applications Certificate Holder ASA Plastics Pty Ltd Polyethylene (PE) Pipes Complies
More informationCaroma Industries Limited ABN
SAI Global hereby grants: Caroma Industries Limited ABN 35000189499 Level 1, 7-9 Irvine Place, Norwest Business Park, Bella Vista, NSW 2153, Australia StandardsMark Licence Manufactured to: AS 1172.1-2014
More informationGAS PSC Press DN20 GAS. PSC Press DN100 COPPER PRESS SYSTEM (GAS) TECHNICAL AND INSTALLATION GUIDE
GAS PSC Press GAS PSC Press COPPER PRESS SYSTEM (GAS) TECHNICAL AND INSTALLATION GUIDE Products WE ARE HERE FOR THE LONG RUN AND SO ARE OUR PRODUCTS! At the Plumbers Supplies Co-operative we are very proud
More informationAS/NZS : Gas appliances - Domestic gas cooking appliances
SAI Global hereby grants: ZEPA SpA Via A. De Gasperi, 20, Pianezze San Lorenzo, Vicenza, Italy Evaluated to: Gas Safety Certification Scheme (GSCS) AS/NZS 5263.1.1:2016 - Gas appliances - Domestic gas
More informationLIXIL (Thailand) Public Company Limited
SAI Global hereby grants: LIXIL (Thailand) Public Company Limited 1/6 Moo 1, Phaholyothin Road Km. 32,Klong Neung, Khlong Luang, Pathumthani, Thailand Watermark Certificate of Conformity - Level 1 Evaluated
More informationW PSC Press DN AS3688 PN-16. W PSC Press DN AS3688 PN-16 COPPER PRESS SYSTEM (WATER) TECHNICAL AND INSTALLATION GUIDE
26126 AS3688 PN-16 W PSC Press 26126 AS3688 PN-16 W PSC Press COPPER PRESS SYSTEM () TECHNICAL AND INSTALLATION GUIDE Products WE ARE HERE FOR THE LONG RUN AND SO ARE OUR PRODUCTS! At the Plumbers Supplies
More informationLevel 1. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Delsa Marmi Pty Ltd
Level 1 Certificate of Conformity Australian Certification Services Pty Ltd grants to the WaterMark User: Delsa Marmi Pty Ltd Trading as Delsa Marmi Pty Ltd the right to use the WaterMark as shown above
More informationHDPE PIPE SYSTEMS PRODUCT CATALOGUE.
HDPE PIPE SYSTEMS PRODUCT CATALOGUE www.acu-tech.com.au This is to certify that: The Trustee for The Morren Family Trust ABN 52 394 633 042 Trading As Acu-Tech Piping Systems 119 Kelvin Road Maddington
More informationLevel 2. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Watersave Australia Pty Ltd
Level 2 Certificate of Conformity Australian Certification Services Pty Ltd grants to the WaterMark User: Watersave Australia Pty Ltd Trading as Watersave Australia the right to use the WaterMark as shown
More informationAS/NZS :2011. Gate valves for waterworks purposes AS/NZS :2011. Part 1: Metal seated. Australian/New Zealand Standard
AS/NZS 2638.1:2011 Incorporating Amendment No. 1 Australian/New Zealand Standard Gate valves for waterworks purposes Part 1: Metal seated AS/NZS 2638.1:2011 AS/NZS 2638.1:2011 This joint Australian/New
More informationSPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL STAINLESS V PRESS EDITION: 0001
STAINESS V PRESS SPECIFICATIONS & INSTAATION GUIDE ANOTHER QUAITY PRODUCT BY FORA GOBA EDITION: 0001 G O B A World Force In Plumbing Systems Forza Global in partnership with one of the world s leading
More informationAS/NZS :2016. Grid connection of energy systems via inverters AS/NZS :2016. Part 1: Installation requirements
AS/NZS 4777.1:2016 Australian/New Zealand Standard Grid connection of energy systems via inverters Part 1: Installation requirements AS/NZS 4777.1:2016 AS/NZS 4777.1:2016 This joint Australian/New Zealand
More informationAURELIA METALS LTD 2016 Annual Report
AURELIA METALS LTD 2016 Annual Report AURELIA METALS LTD ASX Code: AMI ABN: 37 108 476 384 2 CORPORATION PLACE, ORANGE NSW 2800 Phone: +61 2 6363 5200 Fax: +61 2 6361 4711 www.aureliametals.com COMPANY
More informationTucks Industrial Packings & Seals Pty Ltd PRODUCT APPRAISAL REPORT 1425 Issue 2
WSAA Product Appraisal 1425 Issue 2 1 Tucks Industrial Packings & Seals Pty Ltd PRODUCT APPRAISAL REPORT 1425 Issue 2 Flange Gaskets WSA 109-2011 Industry Standard for Flange Gaskets and O-rings Publication
More informationAutomatic Control Valves
Automatic Control Valves The Automatic Answer to Fluid Control Watts.com Trust Watts ACVs for Quality, Performance & Reliability You need: Unquestionable confidence in the quality and performance of the
More informationESS Lighting Instruction Pack Original Energy Saver
ESS Lighting Instruction Pack Original Energy Saver For projects completed: AFTER 1 July 2014 This Instruction Pack is designed to simplify the processing of Energy Savings Certificates for commercial
More informationAustralian Standard. Caravan and light trailer towing components. Part 1: Towbars and towing brackets AS
AS 4177.1 2004 (Incorporating Amendment Nos 1 and 2) AS 4177.1 2004 Australian Standard Caravan and light trailer towing components Part 1: Towbars and towing brackets This Australian Standard was prepared
More informationAustralian Standard. Cranes, hoists and winches. Part 6: Guided storing and retrieving appliances AS AS
AS 1418.6 2004 AS 1418.6 2004 Australian Standard Cranes, hoists and winches Part 6: Guided storing and retrieving appliances This Australian Standard was prepared by Committee ME-005, Cranes. It was approved
More informationBERMAD Spare Parts. PRV Series. Direct Acting Pressure Reducing Valve. Size: 11/2 2/05
PRV Series Direct Acting Pressure Reducing Valve Size: 11/2 23 AR Series Plastic Air Release Valve Automatic or Kinetic Size: 1 24 AR Series Metal Air Release Valve Automatic or Kinetic Size: 1 25 AR Series
More informationAS/NZS 3131:2001 AS/NZS
AS/NZS 3131:2015 Australian/New Zealand Standard Approval and test specification Plugs and socket-outlets for stationary appliances Superseding AS/NZS 3131:2001 AS/NZS 3131:2015 AS/NZS 3131:2015 This joint
More informationAS/NZS :2010. Water supply Backflow prevention devices AS/NZS :2010. Part 1: Materials, design and performance requirements
Australian/New Zealand Standard Water supply Backflow prevention devices AS/NZS 2845.1:2010 Incorporating Amendment No. 1 Part 1: Materials, design and performance requirements Superseding AS/NZS 2845.1:1998
More informationAntares Funds Equities
Financial Report Antares Funds Equities For the period ending 30 June 2016 a partner of: nabassetmanagement Ernst & Young 200 George Street Sydney NSW 2000 Australia GPO Box 2646 Sydney NSW 2001
More informationAustralian/New Zealand Standard
AS/NZS 3131 Australian/New Zealand Standard Approval and test specification Plugs and socket-outlets for stationary appliances This Joint Australian/New Zealand Standard was prepared by Joint Technical
More informationBERMAD Waterworks. Pressure Relief/Sustaining Valve. Model: WW Series. Features and Benefits. Major Additional Features
Pressure Relief/Sustaining Valve Prioritizing pressure zones Ensuring controlled pipeline fill-up Preventing pipeline emptying Pump overload & cavitation protection Safeguarding pump minimum flow Excessive
More informationWATERWORKS. Reach Optimum Efficiency with OCV Control Valves.
WATERWORKS Reach Optimum Efficiency with OCV Control Valves. Quality products backed by the industry s leading warranty. For over 60 years, OCV has been a trusted name in the waterworks and fluid handling
More informationAustralian/New Zealand Standard
AS/NZS 3001:2008 (Incorporating Amendment No. 1) AS/NZS 3001:2008 Australian/New Zealand Standard Electrical installations Transportable structures and vehicles including their site supplies AS/NZS 3001:2008
More informationExecutive Order G F
State of California AIR RESOURCES BOARD Executive Order G-70-116-F Certification of ConVault, Inc. Aboveground Filling/Dispensing Vapor Recovery System WHEREAS, the Air Resources Board (the "Board") has
More informationAS/NZS 3112:2004 AS/NZS
AS/NZS 3112:2011 Incorporating Amendment No. 1, 2, and 3 Australian/New Zealand Standard Approval and test specification Plugs and socket-outlets Superseding AS/NZS 3112:2004 AS/NZS 3112:2011 AS/NZS 3112:2011
More informationAS AS Australian Standard. Starter batteries Lead acid. This is a free 6 page sample. Access the full version online.
AS 2149 2003 AS 2149 Australian Standard Starter batteries Lead acid This Australian Standard was prepared by Committee EL-005, Secondary Batteries. It was approved on behalf of the Council of Standards
More informationAustralian Standard. Pneumatic fluid power General requirements for systems (ISO 4414:1998, MOD) AS AS 2788
AS 2788 2002 AS 2788 Australian Standard Pneumatic fluid power General requirements for systems (ISO 4414:1998, MOD) This Australian Standard was prepared by Committee ME-035, Fluid Power Systems and Components.
More informationLevel 2. Certificate of Conformity. Australian Certification Services Pty Ltd grants to the WaterMark User: Gracott Industries Pty Ltd
Level 2 Certificate of Conformity Australian Certification Services Pty Ltd grants to the WaterMark User: Gracott Industries Pty Ltd Trading as Gracott Industries Pty Ltd the right to use the WaterMark
More informationTOUCH-ACTIVATED DUAL FLUSH WC FLUSHING SYSTEM - FRONT ACCESS
TOUCH-ACTIVATED DUAL FLUSH WC FLUSHING SYSTEM - FRONT ACCESS Installation and Maintenance Instructions EMF411M I00004_Dec 17 Call 1300 369 273 www.enware.com.au Enware Australia Pty Limited 9 Endeavour
More informationDOROT CONTROL VALVES CATALOGUE
DOROT CONTROL VALVES CATALOGUE Content SERIES 80 Globe & Angle Irrigation Valves 4 SERIES 80 80-1, 80-3/4 Turf Irrigation Valves 6 SERIES 75 Gal Plastic Valves 8 SERIES 95/96 UPVC Valves 10 Plastic Control
More informationBEFORE THE PUBLIC UTILITIES COMMISSION OF THE STATE OF CALIFORNIA
BEFORE THE PUBLIC UTILITIES COMMISSION OF THE STATE OF CALIFORNIA Order Instituting Rulemaking Concerning Energy Efficiency Rolling Portfolios, Policies, Programs, Evaluation, and Related Issues. R.13-11-005
More informationSeries 500 Valves. Product Catalogue. Series 500 Valves. Series 500 Valves. Catalogue. Edition 10/2012
Series 500 Valves Product Catalogue Catalogue Areas Of Activity Waterworks Dorot s valves are especially designed to comply with all the demands of Waterworks systems such as Pressure Management, Low Flow
More informationAustralian/New Zealand Standard
AS/NZS 3112:2011 AS/NZS 3112:2011 Australian/New Zealand Standard Approval and test specification Plugs and socket-outlets AS/NZS 3112:2011 This Joint Australian/New Zealand Standard was prepared by Joint
More informationTOUCH-ACTIVATED URINAL FLUSHING SYSTEM SLIM STYLE PANEL - LARGE (FRONT ACCESS)
TOUCH-ACTIVATED URINAL FLUSHING SYSTEM SLIM STYLE PANEL - LARGE (FRONT ACCESS) Installation & Maintenance Instructions EMF307M 29 July 2013 11:40 AM Call 1300 369 273 www.enware.com Enware Australia Pty
More informationAS/NZS ISO :2013
ISO 7176-28:2012, IDT Australian/New Zealand Standard Wheelchairs Part 28: Requirements and test methods for stair-climbing devices AS/NZS ISO 7176.28:2013 This Joint Australian/New Zealand Standard was
More informationKENYA ELECTRICITY GENERATING COMPANY LTD ADDENDUM 1
KGN-HYD-022-2017 TENDER FOR MANUFACTURE SUPPLY TESTING AND COMMISSIONING OF AN EMERGENCY DIESEL GENERATOR FOR KAMBURU HYDRO POWER STATION ADDENDUM 1 The clauses listed have been amended to read as written
More informationPiston Actuated Valve Type G
Piston Actuated Valve Type G Hydraulic Control Valve is the most efficient valve for automatic operation of industrial and municipal distribution systems or any other system that requires adjustable working
More informationStreamlined Application Decision Perimeter Seating Bus Additional Vehicles
Streamlined Application Decision Perimeter Seating Bus Additional Vehicles Application # AV126/15 PSB Applicant Sun Valley Limousine Ltd. Principals Address Current Licence Application Summary Date Published
More informationWater Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Pressure Sewerage Products Valves Section SPO 01 Last updated Jan 2007 CONTENTS SPO 1-S1 GAS RELEASE VALVE A SPO 1-S2 COMBINATION GAS
More information/ I S S : / S T S I
Agenda Electrical Transformers (Quality Control) Order Obtaining BIS Licence Requirements of Guidelines / IS 1180-1: 1: 2014 / STI Concerns in Getting BIS Licence Experience with BEE Regulations Recommendations
More informationAUTOMATIC CONTROL VALVES. TIS asia
AUTOMATIC CONTROL VALVES VALVES DEDICATED TO THE WATER DISTRIBUTION NETWORK AND HYDROPOWER SECTOR WE DO NOT SELL JUST VALVES, WE SELL A SOLUTION FOR THE EFFICIENCY OF THE WATER NETWORK TIS asia MADE IN
More informationTemperature Controls Pty Ltd ACN: ABN:
Temperature Controls Pty Ltd ACN: 075 298 592 ABN: 966 501 901 83 Sydney (Head Office): 7 Yamma St, Sefton, NSW 2162 Australia Ph: 61 2 9721 8644 Fax: 61 2 9738 9339 Melbourne: 8/280 Whitehall St, Yarraville
More informationBERMAD. Hydraulic Control Valves. 700 Series
BERMAD BERMAD 700 SERIES CONTROL VALVES IN WATERWORKS APPLICATIONS Waterworks is that segment of BERMAD s activities that are associated with water supply and distribution system applications. The heart
More informationHYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES The automatic control valves are diaphragm valves designed to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Main valve uses
More informationFoam Pump HYDEN424 and Foam Injector HYDEN428
Pty Limited /48 Racecourse Road RUTHERFORD NSW 2320 Telephone: (02) 4932 0 Facsimile: (02) 4932 0222 E-mail:hyden@hydeneng.com.au ABN: 7 29 00 902 ENVIROSPRAY Component Manual Manual Number: 06500988B
More informationAustralian/New Zealand Standard
AS/NZS 1425:2007 AS/NZS 1425:2007 Australian/New Zealand Standard LP Gas fuel systems for vehicle engines AS/NZS 1425:2007 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee
More informationControl Components Pty Ltd. Drawing Number. Indicator Model Overview A 66.01A Side flanged connection
ABN 24 8 175 293 PO Box 212 Caringbah NSW 1495 Sydney Australia ph: +61 ()2 9542 8977 fx: +61 ()2 9542 7978 www.controlcomponents.com.au HELP@controlcomponents.com.au Magnetic Visual Level Indicators made
More informationAS/NZS :2013. Wheelchairs AS/NZS :2013. Australian/New Zealand Standard
AS/NZS 3695.2:2013 Australian/New Zealand Standard Wheelchairs Part 2: Requirements and test methods for electrically powered wheelchairs (including mobility scooters) Superseding AS 3695 1992 AS/NZS 3695.2:2013
More informationPneumatics, Automation & Control Solutions
www.baccara-geva.com 500 series hydraulic control valves 500 Series hydraulic control valves general 500 series valves are direct diaphragm closing automatic hydraulic control valves which work with line
More informationThe Legendary Polivac Range
O V E R Y E A R S The Legendary Polivac Range Thank you for considering Polivac. Whatever you clean, now or in the future, if you re looking for long life and reliability, there s a machine in our range
More informationDifferential Piston Control Valves Pressure, Level and Flow Control
Differential Piston Control Valves Pressure, Level and Flow Control A Century of Experience VAG GA Industries valves are known for long term reliability in the most demanding water and wastewater applications.
More informationIECEx Certificate of Conformity
IECEx Certificate of Conformity Certificate No.: IECEx TUN 04.0006X Date of Issue: 2012-06-12 Issue No.: 3 Page 2 of 4 Manufacturer: FAFNIR GmbH Bahrenfelder Straße 19 22765 Hamburg Germany Manufacturing
More informationLaboratory Evaluation Report for: Backflow Preventer for Beverage Dispensing Equipment
American Society of Sanitary Engineering Seal (Certification) Program Laboratory Evaluation Report for: Backflow Preventer for Beverage Dispensing Equipment Tested under ASSE Standard 1022 ASSE: 2003 ANSI:
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2010-04-01 Page 1 of 8 Report Reference # E229738-A1-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: UL 60950-1, 2nd Edition, 2007-03-27 (Information Technology Equipment
More informationfor the use of SIQ Type Approved certification mark 51-SIQ BG 004/130 Project file: C DIN Rail Power Supply
SIA 'I Licence Number: Product: Type reference: Trademark: 51-SIQ BG 4/13 Project file: C216972 DIN Rail Power Supply DRM-24V48W1 PX(y); X: any alphanumeric character except Y and Z or blank; (y): any
More informationIECEx Certificate of Conformity
IECEx Certificate of Conformity Certificate No.: IECEx TUN 04.0006X Date of Issue: 2014-04-01 Issue No.: 4 Page 2 of 4 Manufacturer: FAFNIR GmbH Bahrenfelder Straße 19 22765 Hamburg Additional Manufacturing
More informationscrew pumps & systems
SCREW PUMP PROGRAM Screw Pumps & Systems screw pumps & systems 1 sales@dynapumps.com.au 1300 788 579 Industries AT HOME IN MANY INDUSTRIES Customized solutions for various applications OIL & GAS SHIPBUILDING
More informationAustralian/New Zealand Standard
AS/NZS 1754:2013 (Incorporating Amendment No. 1) AS/NZS 1754:2013 Australian/New Zealand Standard Child restraint systems for use in motor vehicles AS/NZS 1754:2013 This Joint Australian/New Zealand Standard
More informationHien Ly s qualifications and gas utility experience Updated 10 May 2014
Clean Fuels Services International 11 Cornhill Place Cherrybrook, NSW 2126, Australia Phone: +61 2 9875 3983 Mobile: +61 433 988 360 hienly@cfsinternational.com.au Web: www.cfsinternational.com.au Natural
More informationDraft Agenda. Item Subject Responsible Time. 4. GAS INFORMATION SERVICES PROJECT IMO 10 min. 5. OPTIONS FOR GAS BULLETIN BOARD SYSTEM IMO 15 min
Gas Advisory Board Draft Agenda Meeting No. 1 Location: Parmelia Hilton, Swan B Room 14 Mill Street, Perth WA 6000 Date: 20 December 2011 Time: 11:15am 12:15pm Item Subject Responsible Time 1. WELCOME
More informationBERMAD Waterworks. Booster Pump Control Valve Active Check Valve. 700 Series. Model 740. Features and Benefits. Major Additional Features
Booster Pump Control Valve Active Check Valve Isolates system from the effects of pump starts and stops for: Solitary single speed pumps Battery of single speed pumps (add & switch) Battery of variable
More informationSFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 *
SFI SPECIFICATION 35.1 EFFECTIVE: AUGUST 26, 2008 * PRODUCT: Stock Car Steel Wheels 1.0 GENERAL INFORMATION 1.1 This SFI Specification establishes uniform test procedures and minimum standards for evaluating
More informationAUTOMATIC CONTROL VALVES BY RAPHAEL
CONTROL VALVES AUTOMATIC CONTROL VALVES BY RAPHAEL RAF PRESSURE RAF PRESSURE offers the possibility of controlling an upstream pressure, a downstream pressure or both. RAF PRESSURE REDUCING reduces and
More informationSUREFLOW FLANGED FITTINGS DUCTILE IRON PIPELINE SYSTEMS
80-750. MANUFACTURED TO AS/NZS 2280. FLANGE DIMENSIONS TO AS 4087 Ductile Iron fittings provide high strength and impact resistance Suitale for in ground or aove ground applications All fittings are supplied
More informationT he -A900 series of automatic control
A00 Automatic Control Valve T he -A00 series of automatic control valves are Basic Valves to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Top and seat
More informationAVIATION FUELING CONTROL VALVES
c o n t r o l v a l v e s. c o m AVIATION FUELING CONTROL VALVES Quality products backed by the industry s leading warranty. For over 60 years, OCV has been a trusted name in the military and commercial
More informationHow to combat hidden danger
keep your distance Rear-end collisions are the easiest accidents to prevent. Remember, they are the direct result of drivers following too closely. They can t stop in time even if they pay the closest
More informationDeGrussa Solar Hybrid Project
DeGrussa Solar Hybrid Project Essential Information 27 June 2017 Neoen, a leading international IPP Neoen has installed or is currently constructing more than 1.1GW of renewable energy projects globally:
More informationWater Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Gravity Sewerage Products Vitrified Clay Pipeline System Section SGPS 02 Last updated Jan 2007 CONTENTS A SGPS 02-S1 PIPES TO EN 295 A
More informationMacquarie Atlas Roads International Limited. TOLL REVENUE AND TRAFFIC STATISTICS 3 rd Quarter 2017
Limited ACN 141 075 201 Macquarie Atlas Roads International Limited EC43828 Level 7, 50 Martin Place SYDNEY NSW 2000 GPO Box 4294 SYDNEY NSW 1164 AUSTRALIA Telephone 612 8232 3333 Facsimile 612 8232 4713
More informationControl Rubber Availability & Product Data WaterMark Quality Assured S37 Standards Australia
Control Rubber Availability & WaterMark Quality Assured S37 Standards Australia Precision Nitrile Low Pressure High Pressure 1 Nitrile High Pressure 2 Nitrile EPDM High Pressure 2 EPDM Viton Kwyflo AUSTRALIA
More informationBERMAD BERMAD BERMAD WW M
Surge Anticipating Control Valve with Solenoid Control Eliminates surge in all pumping systems: Booster & deep well, single & variable speed Eliminates surge in all distribution networks: Municipal, high-rise
More informationHYDEN500 Grease Pump
Easilube Product Manual Hyden Engineering Pty Limited 1/48 Racecourse Road RUTHERFORD NSW 2320 Telephone: (02) 4932 0111 Facsimile: (02) 4932 0222 E-mail:hyden@hydeneng.com.au ABN: 17 129 010 902 Manual
More informationTECHNICAL BULLETIN. Sandvik MB670 Bolter Miners
TECHNICAL BULLETIN 1(2) TB1212 August 01, 2012 TOPIC: CONCERNS: MORLEY EMW 32 S 132 KW HYDRAULIC PUMP MOTOR GLAND ADAPTER PLATE CERTIFICATION This technical bulletin is applicable to Sandvik Bolter Miners
More informationState of California AIR RESOURCES BOARD EXECUTIVE ORDER VR-204-U. Relating to Certification of Vapor Recovery Systems
State of California AIR RESOURCES BOARD EXECUTIVE ORDER VR-204-U Relating to Certification of Vapor Recovery Systems Balance Phase II Enhanced Vapor Recovery (EVR) System Including In-Station Diagnostics
More informationJHT ACN COMPANY INDUCTION JOHN HEGGART TRANSPORT. Ph: Fax: P.O BOX 1271 Warragul Vic
JOHN HEGGART TRANSPORT PTY. LTD. ACN 094 311 243 COMPANY INDUCTION JOHN HEGGART TRANSPORT Ph:0356232231 Fax:0356232483 P.O BOX 1271 Warragul Vic 3820 Email: jht@dcsi.net.au Table of Contents. 1.0 JHT Goal
More informationSTAPS Wireless Steam Trap Monitoring System
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationAustralian/New Zealand Standard
AS/NZS 3696.19:2009 AS/NZS 3696.19:2009 Australian/New Zealand Standard Wheelchairs Part 19: Wheeled mobility devices for use as seats in motor vehicles (ISO 7176-19:2008, MOD) AS/NZS 3696.19:2009 This
More information1. This bylaw may be cited as the New Zealand Transport Agency Bylaw 2008/01.
Bylaw 2008/01 Prescribing Use of the Northern Busway in Auckland Pursuant to section 61(3) of the Government Roading Powers Act 1989, and section 72(1)(j) of the Transport Act 1962, the New Zealand Transport
More informationAustralian Standard. Uninterruptible power systems (UPS) Part 1.1: General and safety requirements for UPS used in operator access areas
AS 62040.1.1 2003 IEC 62040-1-1:2002 IEC 62040-1-1:2002/Corr.1:2002 Reconfirmed 2013 AS 62040.1.1 Australian Standard Uninterruptible power systems (UPS) Part 1.1: General and safety requirements for UPS
More informationAS/NZS 1927:1998 AS/NZS
AS/NZS 1927:2010 Incorporating Amendment No. 1 Australian/New Zealand Standard Pedal bicycles Safety requirements Superseding AS/NZS 1927:1998 AS/NZS 1927:2010 AS/NZS 1927:2010 This Joint Australian/New
More informationAustralian Standard. Wind turbines. Part 2: Design requirements for small wind turbines. AS IEC IEC , Ed.2.
AS IEC 61400.2 2013 IEC 61400-2, Ed.2.0 (2006) AS IEC 61400.2 2013 Australian Standard Wind turbines Part 2: Design requirements for small wind turbines This Australian Standard was prepared by Committee
More informationAustralian Standard. Cranes, hoists and winches. Part 18: Crane runways and monorails. AS (Incorporating Amendment Nos 1 and 2)
AS 1418.18 2001 (Incorporating Amendment Nos 1 and 2) AS 1418.18 Australian Standard A1 Cranes, hoists and winches Part 18: Crane runways and monorails This Australian Standard was prepared by Committee
More informationMCS. MCS Metering Guidance V1.0. Gemserv Ltd 10 Fenchurch Street, London. EC3M 3BE.
MCS V1.0 Gemserv Ltd 10 Fenchurch Street, London. EC3M 3BE. www.gemserv.com 1. Introduction The Government has introduced Feed-in Tariffs (FiTs) to support small-scale electricity generation from April
More informationOver 330 Clarifier installations in 3 continents
LAMELLA SEPARATORS Over 330 Clarifier installations in 3 continents With over 60 years of design and commissioning expertise, you can be assured that your Hydroflux Epco clarifier will perform consistently
More informationVALVCHEQ BACKFLOW PREVENTERS FIGURE DC03
Double check valves for medium hazard rated applications Flanged and roll grooved end connections FEATURES GENERAL APPLICATION The DC0 provides protection from both backsiphonage and backpressure of the
More informationAutomatic control valves XLC 400 series
Automatic control valves XLC 400 series The company was founded in 1987 by transforming the former CSA, which was a trading company dealing with pipes and valves for water networks, into a manufacturing
More informationANTI-CAVITATION SOLUTIONS
ANTI-CAVITATION SOLUTIONS The Ross WaterTamer anti-cavitation valve will take the pressure off you. If your applications encounter cavitation, you know the symptoms: that loud screeching noise that lets
More informationAustralian Standard. The removal and disposal of underground petroleum storage tanks AS AS
AS 4976 2008 AS 4976 2008 Australian Standard The removal and disposal of underground petroleum storage tanks This Australian Standard was prepared by Committee ME-017, Flammable and Combustible Liquids.
More informationAUTOMATIC CONTROL VALVES
R TM AUTOMATIC CONTROL VALVES R TM Automatic Control Valves Index CONTENT PAGE Main Valve Hytrol 1 Main Valve Schematic Diagram 2 Quick Selection / Performance Chart 3 Hytrol Part Listing 4 Hytrol Dimensions
More informationClass 2 Road Train Notice Schedule
Road Transport (General) Act 2005 Class 2 Road Train Notice 2012 I, Peter Duncan, Chief Executive of Roads and Maritime Services pursuant to Clause 20 of the Road Transport (Mass, Loading and Access) Regulation
More informationfor the use of SIQ Type Approved certification mark Sl-SIQ BG 004/081 Project file: C DIN Rail Power Supply
Si l!~ Licence Number: Product: Type reference: Trademark: Sl-SIQ BG 4/81 Project file: C215195 DIN Rail Power Supply DRM-24V12W1 PX(y); X: any alphanumeric character except Y and Z or blank; (y): any
More informationALLWEILER. Pressure-relief valves, indirectly pilot-controlled. Series DVI
Pressure-relief valves, indirectly pilot-controlled Series DVI Range of application The pressure-relief valves of Series DVI can be applied for maximum operating temperatures up to 150 C (higher temperatures
More informationNERSA CONSULTATION PAPER PROCESS. Moefi Moroeng Specialist: Wholesale Electricity Trading
NERSA CONSULTATION PAPER PROCESS Moefi Moroeng Specialist: Wholesale Electricity Trading 1 AGENDA Energy Regulator Overview Regulation of the Electricity Supply Industry Current Structure of the Electricity
More informationELECTRIC POWER BOARD OF THE METROPOLITAN GOVERNMENT OF NASHVILLE AND DAVIDSON COUNTY. Availability
ELECTRIC POWER BOARD OF THE METROPOLITAN GOVERNMENT OF NASHVILLE AND DAVIDSON COUNTY MANUFACTURING SERVICE RATE--SCHEDULE MSD Availability This rate shall apply to the firm electric power requirements
More informationROLLS-ROYCE CORPORATION (FORMERLY ALLISON ENGINE COMPANY)
Page 1 2010-19-01 ROLLS-ROYCE CORPORATION (FORMERLY ALLISON ENGINE COMPANY) Amendment 39-16429 Docket No. FAA-2009-0811; Directorate Identifier 2008-NE-41-AD PREAMBLE Effective Date (a) This airworthiness
More informationGuideline for the Queensland Rally Vehicle Registration Scheme
Guideline for the Queensland Rally Vehicle Registration Scheme Form 34 Version 1 April 2015 The State of Queensland (Department of Transport and Main Roads) 2015 http://creativecommons.org/licences/by-nc/3.0/au
More information