Declaration of Compliance for Elo AccuTouch Screens
|
|
- Kelly Daniels
- 5 years ago
- Views:
Transcription
1 Declaration of Compliance for Elo AccuTouch Screens Date: June 14, 2016 Product: AccuTouch Screens (model numbers starting with SCN-AT or SCN-A5) See attached list of applicable part numbers Elo Touch Solutions Inc. ( Elo ) hereby certifies to the best of its knowledge the following about the above Elo product(s): RoHS: The products comply with the substance restrictions of EU Directive 2011/65/EU ( RoHS 2 ). Exemption 7(c)-i is claimed for lead in the screens glass substrate. (Clarifying note: this includes 2015/863/EU and all other amendments made to 2011/65/EU before this certification s date) RC Rev. F, Page 1 of 21
2 Accutouch 触摸屏 (Accutouch Touchscreen) 国电子电气产品环境信息 China EEP Environmental Information 铅 (Pb) (Hg) 质或元素 Hazardous Substance 镉 (Cd) 铬 (Cr6) 溴联苯 (PBB) 溴二苯醚 (PBDE) (Glass) X O O O O O 电缆组件 (Cable Assembly) O O O O O O 焊料熔剂 (Solder Flux) O O O O O O DSCA (DSCA) O O O O O O 绝缘颗粒油墨 (Spacer Dot Ink) O O O O O O (Coversheet) O O O O O O 规定编制. This table is prepared in accordance with the provisions of SJ/T O: 该有害物质在该部件所有均质材料中的含量均在 GB/T 规定的限量要求以下. Indicates that said hazardous substance contained in all homogenous materials for this part is below the limit requirement of GB/T X: 该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 规定的限量要求. Indicates that said hazardous substance contained in at least one of the homogenous materials used for this part is above the limit requirement of GB/T Applicable EPUP Symbol (for China SJ/T China RoHS ): REACH: The products comply with the substance restrictions of EU Directive 1907/2006 Annex XVII (REACH Restriction list ). The products do not contain any of the EU Directive 1907/2006 Candidate List of substances of very high concern for Authorisation (REACH SVHC ). RC Rev. F, Page 2 of 21
3 SAFETY: UL has recognized the above products as a Recognized Component complying with the following safety standards: UL nd Edition under Category Code NWGQ2 CSA 22.2 No nd edition under Category Code NWGQ8 Elo s UL file number is E The certification can be reviewed at UL s online certifications directory at TUV Rheinland has certified the above products as compliant to: EN :2006+A11+A1+A12. The TUV certificate number is R The certification can be reviewed at TUV s online certifications directory at DISCLAIMER This Elo Declaration of Compliance is subject to the Elo Terms and Conditions of Sale (located at the following website: and in no case shall Elo be liable for any incidental, indirect or consequential damages arising out of the sale, resale, or misuse of Elo products. Users of Elo products should make their own evaluation to determine the suitability of each such product for the specific application and to establish safe handling and installation procedures. I hereby certify to the best of my knowledge that this Declaration of Compliance is accurate. Regards, Components Engineering Compliance Manager Elo Touch Solutions, Inc. RC Rev. F, Page 3 of 21
4 APPLICABLE PART NUMBERS Elo Part Number Elo Model Number SCN-AT-FLT15.1-ZPM-0H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT17.0-Z01-0H SCN-AT-SPH H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT12.1-Z01-0H SCN-AT-FLT H SCN-AT-FLT19.0-Z02-0H SCN-AT-FLT10.4-WA0-0H SCN-AT-FLT10.4-0S1-0H SCN-AT-FLT17.1-Z02-0H SCN-AT-FLT11.5-M04-0A SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT10.4-FRE-0H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT11.3-M07-0A SCN-AT-FLT H SCN-AT-FLT12.1-NCR-0H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-SPH H SCN-AT-FLT15.0-Z05-0H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT20.4-A/R-0H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-SPH A SCN-AT-FLT H SCN-AT-SPH H SCN-AT-FLT H1 RC Rev. F, Page 4 of 21
5 SCN-AT-FLT H SCN-AT-SPH H SCN-AT-FLT HA SCN-AT-FCR H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT A SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT A SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT15.0-R4H-0H SCN-AT-FLT H SCN-AT-FLT A SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT12.1-M08-0H SCN-AT-FLT H SCN-AT-SPH H SCN-AT-FLT H SCN-AT-FLT15.1-OPT-0H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT12.1-XN2-0H SCN-AT-FLT HA SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT10.4-SL0-0H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT12.1-WAG-0H SCN-AT-FLT H1 RC Rev. F, Page 5 of 21
6 SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT H SCN-AT-FLT12.1-M08-0A SCN-AT-FLT11.3-M09-0A SCN-AT-FLT H SCN-AT-FLT H SCN-AT-SPH A1 A SCN-AT-FLT17.5-Z01-0H1 A SCN-AT-FLT17.1-Z03-0H1 A SCN-AT-SPH H1 A SCN-AT-FLT19.0-W01-0H1 A SCN-AT-FLT06.4-Z03-0H1 A SCN-AT-FLT17.1-Z01-0H1 A SCN-AT-FLT12.1-R4H-0H1 C SCN-AT-FLT09.8-PH0-0H1 C SCN-AT-FLT12.1-SL0-0H1 C SCN-AT-FLT06.4-Z06-0H1 C SCN-AT-FLT H1 C SCN-AT-FLT10.4-Z02-0H1 C SCN-AT-FLT H1 C SCN-AT-FLT10.4-Z01-0H1 C SCN-AT-FLT15.0-W04-0H1 C SCN-AT-FLT21.3-Z01-0H1 C SCN-AT-FLT12.1-Z07-0H1 C SCN-AT-FLT15.1-W01-0H1 C SCN-AT-FLT14.1-Z01-0H1 C SCN-AT-FLT12.1-Z04-0H1 D SCN-AT-FLT19.0-Z03-0H1 D SCN-AT-FLT H1 D SCN-AT-FLT10.4-Z04-0H1 D SCN-AT-FLT15.1-Z01-0H1 D SCN-AT-FLT15.1-Z01-0H1-R D SCN-AT-FLT15.0-Z09-0H1 D SCN-AT-FLT H1 D SCN-AT-FLT15.0-PT0-0H1 D SCN-A5-FLT16.4-Z01-0H1-R D SCN-AT-FLT05.7-Z01-0H1 D SCN-AT-FLT10.4-Z05-0H1 D SCN-AT-FLT08.4-PT1-0H1 RC Rev. F, Page 6 of 21
7 D SCN-AT-FLT10.4-DL0-0H1 E SCN-A5-FLT10.4-SL0-0H1-R E SCN-A5-FLT15.0-Z30-0H1-R E SCN-A5-FZT15.0-NC1-0H1-R E SCN-A5-FZT15.0-FT2.0H1-R E SCN-A5-FLW07.0-Z02-0H1-R E SCN-AT-FLW20.0-Z01-0H1-R E SCN-A5-FZW07.0-Z02-0H1-R E SCN-A5-FLW07.0-Z01-0H1-R E SCN-A5-FZT19.0-Z01-0H1-R E SCN-AT-FLW24.0-Z01-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT12.1-PH1-0H1-R E SCN-A5-FZW15.6-Z01-0H1-R E SCN-A5-FZW18.5-Z01-0H1-R E SCN-A5-FZT15.0-PX1-0H1-R E SCN-A5-FZW15.6-AG1-0H1-R E SCN-A5-FZT15.0-CC1-0H1-R E SCN-A5-FLT10.4-Z02-0H1-R E SCN-A5-FZT12.1-BZ2-0H1-R E SCN-A5-FZT15.0-PF1-0H1-R E SCN-A5-FZT15.0-M01-0H1-R E SCN-A5-FZW21.5-Z01-0H1-R E SCN-A5-FLT15.0-TV1-0H1-R E SCN-AT-FLW17.0-Z01-0H1-R E SCN-AT-FLW15.4-Z01-0H1-R E SCN-AT-FLT15.0-Z50-0H1-R E SCN-A5-FZT15.0-ZW1-0H1-R E SCN-A5-FLT19.0-F10-0H1-R E SCN-AT-FLT12.1-ZT1-0H1-R E SCN-A5-FZW22.0-MR1-0H1-R E SCN-AT-FLT12.1-RR1-0H1-R E SCN-A5-FZT10.5-NC1-0H1-R E SCN-A5-FZT12.1-PS1-0H1-R E SCN-A5-FZT12.2-PS1-0H1-R E SCN-A5-FZT15.0-PS1-0H1-R E SCN-A5-FZT17.1-PS1-0H1-R E SCN-A5-FZW15.6-AU1-0H1-R E SCN-A5-FZT15.0-FR1-0H1-R E SCN-A5-FZW15.6-AS1-0H1-R RC Rev. F, Page 7 of 21
8 E SCN-A5-FZW10.1-HC1-0H1-R E SCN-A5-FLT06.4-Z08-0H1-R E SCN-AT-FLT15.1-Z03-0H1-R E SCN-A5-FLT15.6-F01-0H1-R E SCN-A5-FLT12.1-Z01-0H1-R E SCN-A5-FZT10.4-Z01-0H1-R E SCN-A5-FLT06.4-Z02-0H1-R E SCN-AT-FLT22.0-W01-0H1-R E SCN-AT-FLT H1-R E SCN-AT-FLT12.1-GT1-0H1-R E SCN-A5-FZT12.1-ZW1-0H1-R E SCN-AT-FLT H1-R E SCN-AT-FLT12.1-PT2-0H1 E SCN-AT-FLT15.0-PB1-0H1-R E SCN-A5-FZT19.0-MR1-0H1-R E SCN-A5-FZT15.0-LB1-0H1-R E SCN-A5-FLT H1-R E SCN-AT-FCR20.1-Z01-0H1-R E SCN-AT-FLT07.0-W01-0H1-R E SCN-AT-FLT12.1-PT2-0H1-R E SCN-A5-FLT08.4-Z03-0H1-R E SCN-A5-FLT15.0-F06-0H1-R E SCN-AT-FLT15.0-B02-0H1-R E SCN-AT-FLT10.4-WAG-0H1-R E SCN-A5-FLT15.0-Z01-0H1-R E SCN-A5-FZT12.0-FJ1-0H1-R E SCN-A5-FLT15.0-Z17-0H1-R E SCN-AT-FLT10.4-W01-0H1 E SCN-A5-FLW12.5-PH1-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLW07.0-F01-0H1-R E SCN-A5-FLT10.4-Z03-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLW15.6-F10-0H1-R E SCN-AT-FLT06.4-Z05-0H1-R E SCN-AT-FLT15.0-R4H-0H1-R E SCN-AT-FLT22.0-F01-0H1-R E SCN-A5-FZT17.0-E01-0H1-R E SCN-AT-FLT14.1-Z01-0H1-R E SCN-A5-FLT05.7-Z01-0H1-R RC Rev. F, Page 8 of 21
9 E SCN-AT-FLT12.1-Z12-0H1 E SCN-AT-FLT19.0-Z03-0H1-R E SCN-A5-FLW15.6-F01-0H1-R E SCN-A5-FLT13.3-F04-0H1-R E SCN-A5-FLT H1-R E SCN-AT-FLT H1-R E SCN-A5-FLT15.0-Z11-0H1-R E SCN-A5-FLT12.1-F01-0H1-R E SCN-AT-FLW19.5-Z01-0H1-R E SCN-AT-FLT19.0-Z05-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FZT15.0-Z04-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FZT12.1-BZ1-0H1-R E SCN-A5-FLT10.4-Z13-0H1-R E SCN-AT-FLT12.1-Z13-0H1-R E SCN-A5-FLT19.0-Z09-0H1-R E SCN-A5-FZT05.8-AD1-0H1-R E SCN-A5-FZT06.5-AD1-0H1-R E SCN-AT-FLT15.5-DMY-0H1-R E SCN-A5-FLT19.0-GH1-0H1-R E SCN-AT-FLT10.4-W01-0H1-R E SCN-A5-FLT07.1-Z01-0H1-R E SCN-A5-FLT10.4-F03-0H1-R E SCN-A5-FLT09.0-PH2-0H1-R E SCN-A5-FLT12.0-PH2-0H1-R E SCN-A5-FLW15.3-PH2-0H1-R E SCN-AT-FLT15.5-PH2-0H1-R E SCN-AT-FLT19.0-PH2-0H1-R E SCN-AT-FLT11.5-M04-0A1-R E SCN-AT-FLT H1-R E SCN-A5-FLT12.1-DMY-0H1-R E SCN-AT-FLT15.6-W01-0H1-R E SCN-A5-FLT15.0-Z06-0H1-R E SCN-A5-FZW10.1-Z01-0H1-R E SCN-AT-FLT H1-R E SCN-AT-FLT H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT06.4-Z05-0H1-R E SCN-AT-FLT21.5-W01-0H1-R RC Rev. F, Page 9 of 21
10 E SCN-A5-FZT12.1-Z03-0H1-R E SCN-A5-FLT15.0-ZG1-0H1-R E SCN-AT-FLT H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT11.3-M07-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT07.1-Z30-0H1-R E SCN-AT-FLT H1-R E SCN-A5-FLT H1-R E SCN-AT-FLT H1-R E SCN-A5-FLT12.1-Z07-0H1-R E SCN-A5-FZT15.0-D01-0H1-R E SCN-AT-FLT19.0-Z11-0H1-R E SCN-A5-FLT05.7-Z31-0H1-R E SCN-A5-FLT19.0-Z06-0H1-R E SCN-A5-FLT10.4-FRE-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT H0-R E SCN-AT-FLT10.4-SL0-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FZW15.6-AP1-0H1-R E SCN-A5-FLT13.3-F02-0H1-R E SCN-A5-FZW18.5-AP1-0H1-R E SCN-A5-FZW21.5-AP1-0H1-R E SCN-A5-FLW07.0-CD1-0H1-R E SCN-A5-FLW15.3-PH1-0H1-R E SCN-AT-FLT12.1-Z15-0H1-R E SCN-A5-FLT15.0-Z04-0H1-R E SCN-AT-FLT17.0-Z01-0H1-R E SCN-AT-FLT H1-R E SCN-A5-FLT18.1-F01-0H1-R E SCN-A5-FLT09.0-PH1-0H1-R E SCN-AT-FLT H1-R E SCN-AT-FLT H1-R E SCN-A5-FLT06.1-Z01-0H1-R E SCN-A5-FCR20.1-Z01-0H1-R E SCN-AT-FLT15.0-Z01-0H1-R E SCN-AT-FLT17.1-W02-0H1-R E SCN-AT-FLT08.0-Z01-0H1-R E SCN-A5-FLT15.1-OPT-0H1-R RC Rev. F, Page 10 of 21
11 E SCN-A5-FLT10.4-Z11-0H1-R E SCN-A5-FLT12.1-DIG-0H1-R E SCN-A5-FZT06.5-AN1-0H1-R E SCN-AT-FLT12.1-M08-0H1-R E SCN-A5-FLT12.1-Z17-0H1-R E SCN-AT-FLT06.4-Z08-0H1-R E SCN-A5-FLT10.4-F02-0H1-R E SCN-AT-FLT10.4-Z08-0H1-R E SCN-A5-FLT12.1-SL1-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FZT12.1-FV1-0H1-R E SCN-A5-FLT16.4-DMY-0H1-R E SCN-AT-FLT08.4-Z01-0H1 E SCN-A5-FLT15.1-F03-0H1-R E SCN-A5-FZT15.0-Z01-0H1-R E SCN-A5-FLT A1-R E SCN-AT-FLT06.4-Z03-0H1-R E SCN-A5-FZT15.0-P01-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT H1-R E SCN-A5-FZT15.0-PN4-0H1-R E SCN-AT-FLT H1-R E SCN-A5-FLT15.0-Z09-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT15.0-F01-0H1-R E SCN-AT-FLT12.1-W01-0H1-R E SCN-A5-FLT12.0-PH1-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FZT15.0-AD1-0H1-R E SCN-A5-FLT15.0-RAD-0H1-R E SCN-A5-FZT15.0-TB1-0H1-R E SCN-A5-FZT10.4-AD1-0H1-R E SCN-AT-FLT24.0-W02-0H1-R E SCN-A5-FLT08.4-Z02-0H1-R E SCN-A5-FLT15.0-Z02-0H1-R E SCN-A5-FLT20.1-Z02-0H1-R E SCN-A5-FLT15.0-N07-0H1-R E SCN-A5-FLW18.5-FS1-0H1-R E SCN-AT-FLT10.4-MOT-0H1-R E SCN-AT-FLT13.3-Z01-0H1-R RC Rev. F, Page 11 of 21
12 E SCN-AT-FLT H1-R E SCN-A5-FLT12.1-Z12-0H1-R E SCN-A5-FLT17.1-Z02-0H1-R E SCN-A5-FLT15.0-Z13-0H1-R E SCN-AT-FLT19.0-W01-0H1-R E SCN-A5-FLT13.3-F30-0H1-R E SCN-AT-FLW17.3-ZK1-0H1-R E SCN-AT-FLW21.5-ZK1-0H1-R E SCN-AT-FLT11.3-M09-0A1-R E SCN-A5-FLW12.1-Z01-0H1-R E SCN-A5-FLT13.3-F02-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT13.3-F03-0H1-R E SCN-A5-FLT10.1-Z01-0H1-R E SCN-A5-FLT12.1-Z19-0H1-R E SCN-AT-FLT11.3-M07-0H1-R E SCN-AT-FLT15.0-W04-0H1-R E SCN-A5-FLT10.4-FRE-0H0-R E SCN-A5-FZT12.1-AD1-0H1-R E SCN-A5-FLT10.4-Z10-0H1-R E SCN-A5-FLT10.4-Z05-0H1-R E SCN-A5-FZT15.0-PN1-0H1-R E SCN-AT-FLT12.1-M08-0H1-R E SCN-A5-FLT17.1-F05-0H1-R E SCN-AT-FLT12.1-W01-0H1 E SCN-A5-FLT12.1-Z10-0H1-R E SCN-A5-FLW07.0-Z01-0H1-R E SCN-A5-FZT15.0-FJ1-0H1-R E SCN-AT-FLT12.1-Z04-0H1-R E SCN-AT-FLT15.1-Z04-0H1-R E SCN-AT-FLT12.1-Z07-0H1-R E SCN-AT-FLT08.4-Z01-0H1-R E SCN-AT-FLT12.1-Z03-0H0-R E SCN-AT-FLT15.5-Z01-0H1-R E SCN-A5-FLT15.0-B01-0H1-R E SCN-A5-FLT08.0-F01-0H1-R E SCN-AT-FLT H1-R E SCN-A5-FLT13.3-Z01-0H1-R E SCN-AT-FLT15.0-Z20-0H1-R E SCN-A5-FLT15.0-F09-0H1-R RC Rev. F, Page 12 of 21
13 E SCN-A5-FLT10.4-DMY-0H1-R E SCN-A5-FLT15.0-Z08-0H1-R E SCN-A5-FLT18.1-Z01-0H1-R E SCN-A5-FLT15.0-F12-0H1-R E SCN-A5-FLT10.4-Z09-0A1-R E SCN-A5-FLT14.1-Z01-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FZT12.1-BZ3-0H1-R E SCN-AT-FLT11.3-M07-0A1-R E SCN-AT-FLT06.4-Z02-0H1-R E SCN-A5-FLT13.3-F01-0H1-R E SCN-A5-FZT15.0-Z20-0H1-R E SCN-A5-FZT19.0-Z20-0H1-R E SCN-A5-FZW21.5-Z20-0H1-R E SCN-A5-FZT15.0-PB1-0H1-R E SCN-AT-FLT17.1-Z01-0H1-R E SCN-AT-FLW17.0-K01-0H1-R E SCN-A5-FLT19.0-F02-0H1-R E SCN-A5-FLT20.1-Z03-0H1-R E SCN-AT-FLT21.3-Z02-0H1-R E SCN-A5-FLT12.1-Z03-0H0-R E SCN-AT-FLT H1-R E SCN-A5-FZW14.0-FT1-0H1-R E SCN-A5-FLT A1-R E SCN-AT-FLT12.1-Z12-0H1-R E SCN-A5-FLT15.0-F01-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT12.1-Z02-0H1-R E SCN-A5-FLT12.1-Z08-0H1-R E SCN-AT-FLT19.0-W02-0H1-R E SCN-A5-FLT12.1-Z22-0H1-R E SCN-AT-FLT H1 E SCN-AT-FLT15.1-ADS-0H1 E SCN-A5-FLT12.1-Z16-0H1-R E SCN-AT-FLW15.4-K01-0H1-R E SCN-AT-FLW20.0-K01-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT H1-R E SCN-AT-FLT H1-R E SCN-A5-FLT12.1-F02-0H1-R RC Rev. F, Page 13 of 21
14 E SCN-A5-FZT12.1-Z02-OH1-R E SCN-A5-FZT15.0-Z02-0H1-R E SCN-AT-FLT18.1-Z01-0H1-R E SCN-A5-FLT15.0-R4H-0H1-R E SCN-AT-FLT H1-R E SCN-AT-FLT17.1-W01-0H1-R E SCN-A5-FLT15.0-Z18-0H1-R E SCN-AT-FLT15.0-Z12-0H1-R E SCN-AT-FLT15.0-M01-0H1-R E SCN-AT-FLT A1-R E SCN-A5-FLT10.4-Z01-0H1-R E SCN-A5-FLT12.1-Z20-0H1-R E SCN-AT-FLT15.0-RAD-0H1-R E SCN-AT-FLT15.0-W01-0H1 E SCN-A5-FZT12.1-WM1-0H1-R E SCN-A5-FZT17.0-WM1-0H1-R E SCN-A5-FLT05.7-Z02-0H1-R E SCN-AT-FLT08.4-PT1-0H1-R E SCN-A5-FLT15.0-F07-0H1-R E SCN-A5-FZW18.5-AP2-OH1-R E SCN-A5-FZT15.0-F01-0H1-R E SCN-A5-FZW15.6-AS2-0H1-R E SCN-A5-FLT H1-R E SCN-AT-FLT15.3-W01-0H1-R E SCN-A5-FLT15.3-Z03-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FZT06.5-AD2-0H1-R E SCN-A5-FZT06.5-AD3-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT12.1-Z18-0H1-R E SCN-A5-FLT08.4-Z01-0H1-R E SCN-AT-FLT H1-R E SCN-AT-FLW23.8-Z01-0H1-R E SCN-AT-FLT H1-R E SCN-A5-FZT15.0-PN2-0H1-R E SCN-AT-FLW10.1-Z01-0H1-R E SCN-AT-FLT12.1-Z05-0H1-R E SCN-AT-FLT15.0-Z07-0H1-R E SCN-AT-FLT10.4-FRE-0H0-R E SCN-AT-FLT15.0-W02-0H1-R RC Rev. F, Page 14 of 21
15 E SCN-A5-FLT18.5-F01-0H1-R E SCN-A5-FLT A1-R E SCN-AT-FLW10.1-Z04-0H1-R E SCN-AT-FLT H1-R E SCN-A5-FLT17.1-Z01-0H1-R E SCN-AT-FLT10.4-Z02-0H1-R E SCN-A5-FZT15.0-E01-0H1-R E SCN-A5-FLT H1-R E SCN-AT-FLT10.4-Z04-0H1-R E SCN-AT-FLT10.4-DUM-0H1-R E SCN-AT-FLT12.1-M08-0A1-R E SCN-AT-FLT12.1-R4H-0H1-R E SCN-A5-FLT19.0-F08-0H1-R E SCN-AT-FLT10.4-Z01-0H1-R E SCN-A5-FZW15.6-AG2-0H1-R E SCN-AT-FLW15.6-Z01-0H1-R E SCN-A5-FLT19.0-Z03-0H1-R E SCN-A5-FLT H1-R E SCN-AT-FLT17.5-Z01-0H1-R E SCN-A5-FLT10.4-F01-0H1-R E SCN-AT-FLT12.1-PT1-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT15.0-Z19-0H1-R E SCN-A5-FLT10.4-MOT-0H1-R E SCN-AT-FLT H1-R E SCN-AT-FLT06.1-Z01-0H1-R E SCN-A5-FZW21.5-AP2-0H1-R E SCN-AT-FLT H1-R E SCN-AT-FLT17.0-W01-0H1-R E SCN-A5-FLT12.1-Z05-0H1-R E SCN-A5-FLW15.4-FS1-0H1-R E SCN-A5-FCR H1-R E SCN-A5-FLT15.0-Z05-0H1-R E SCN-AT-FLT H0-R E SCN-AT-FLT H0-R E SCN-A5-FLT10.4-Z02-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT A1-R E SCN-A5-FLT H1-R E SCN-A5-FLT10.4-Z08-0H1-R RC Rev. F, Page 15 of 21
16 E SCN-A5-FLT19.0-F07-0H1-R E SCN-A5-FLT11.3-M07-0A1-R E SCN-AT-FLW23.0-Z01-0H1-R E SCN-A5-FLT12.1-R4H-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT12.1-Z21-0H1-R E SCN-A5-FLT H0-R E SCN-AT-FLT12.1-Z14-0H1-R E SCN-AT-FLT24.0-W01-0H1-R E SCN-AT-FLT H1-R E SCN-A5-FLT12.1-PT3-0H1-R E SCN-AT-FLT H1-R E SCN-A5-FLT18.5-F01-0H0-R E SCN-A5-FLT10.4-F04-0H1-R E SCN-A5-FLT19.0-F04-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT12.1-F08-0H1-R E SCN-A5-FLT10.4-F06-0H1-R E SCN-A5-FLT19.0-F09-0H1-R E SCN-AT-FLT10.4-Z03-0H1 E SCN-AT-FLT06.4-Z02-0H1 E SCN-AT-FLT15.0-Z07-0H1 E SCN-A5-FLT15.1-ADS-0H1-R E SCN-AT-FLT H1-R E SCN-AT-FLT15.0-Z12-0H1 E SCN-A5-FLT17.5-Z01-0H1-R E SCN-AT-FLT15.1-W01-0H1-R E SCN-A5-FLT19.0-F01-0H1-R E SCN-A5-FLT06.4-Z03-0H1-R E SCN-AT-FLT19.0-Z01-0H1 E SCN-AT-FLT19.0-Z05-0H1-R E SCN-A5-FLT H1-R E SCN-AT-FLT H1 E SCN-A5-FLT15.0-F08-0H1-R E SCN-A5-FLT17.1-Z03-0H1-R E SCN-A5-FLT19.0-Z02-0H1-R E SCN-A5-FLW10.1-Z01-0H1-R E SCN-AT-FLT12.1-SL0-0H1-R E SCN-A5-FLT11.3-M09-0A1-R E SCN-AT-FLT H1-R RC Rev. F, Page 16 of 21
17 E SCN-A5-FLT17.0-F03-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT22.0-F01-0H0-R E SCN-A5-FLT15.0-Z13-0H1-R E SCN-AT-FLT17.1-Z02-0H1-R E SCN-A5-FLW21.5-FS1-0H1-R E SCN-AT-FLT H1-R E SCN-A5-FZT17.0-Z01-0H1-R E SCN-AT-FLT15.0-Z06-0H1-R E SCN-AT-FLT11.6-Z01-0H1-R E SCN-A5-FLT06.4-Z10-0H1-R E SCN-A5-FLT15.1-Z02-0H1-R E SCN-AT-FLT15.0-Z11-0H1 E SCN-A5-FLT H1-R E SCN-A5-FLT15.1-F04-0H1-R E SCN-AT-FLT09.8-PH0-0H1-R E SCN-A5-FLT05.7-Z03-0H1-R E SCN-AT-FLT17.0-Z03-0H1-R E SCN-A5-FLT10.4-F05-0H1-R E SCN-AT-FLW21.5-Z01-0H1-R E SCN-A5-FLT15.0-Z15-0H1-R E SCN-A5-FLT19.0-Z05-0H1-R E SCN-AT-FLT10.4-DL0-0H1-R E SCN-AT-FLT H1-R E SCN-A5-FZT12.1-Z01-0H1-R E SCN-A5-FLT09.7-Z01-0H1-R E SCN-A5-FLT15.0-F04-0H1-R E SCN-A5-FLT15.0-Z21-0H1-R E SCN-AT-FLT15.0-Z01-0H1 E SCN-AT-FLT13.3-Z01-0H1 E SCN-AT-FLT H1-R E SCN-A5-FLT15.0-Z22-0H1-R E SCN-A5-FZT15.0-FT1-0H1-R E SCN-AT-FLT19.0-Z05-0H1 E SCN-A5-FLT12.1-Z30-0H1-R E SCN-AT-FLT10.4-WS1-0H1-R E SCN-A5-FLT21.3-Z01-0H1-R E SCN-A5-FLT11.5-M04-0A1-R E SCN-AT-FLT12.1-Z16-0H1-R E SCN-AT-FLT15.0-PT0-0H1-R RC Rev. F, Page 17 of 21
18 E SCN-AT-FLT12.1-WAG-0H1-R E SCN-A5-FZT10.1-BZ1-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT12.1-Z23-0H1-R E SCN-AT-FLT20.1-Z02-0H1-R E SCN-AT-FLT15.0-Z11-0H1-R E SCN-AT-FLT12.1-Z01-0H1-R E SCN-AT-FLT H1-R E SCN-AT-FLT10.4-Z06-0H1 E SCN-AT-FLT15.0-W01-0H1-R E SCN-AT-FLT19.0-Z07-0H1-R E SCN-AT-FLT12.1-Z13-0H1 E SCN-AT-FLT21.3-Z01-0H1-R E SCN-A5-FLT09.8-PH0-0H1-R E SCN-AT-FLT10.4-0S1-0H1-R E SCN-AT-FLT17.1-Z03-0H1-R E SCN-A5-FZT15.0-PN3-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLW10.1-Z03-0H1-R E SCN-A5-FZW07.0-Z01-0H1-R E SCN-A5-FLT10.4-DL0-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT12.1-Z13-0H1-R E SCN-A5-FLT08.4-PH1-0H1-R E SCN-AT-FLT H1-R E SCN-AT-FLT10.4-Z03-0H1-R E SCN-AT-FLT A1-R E SCN-AT-FLT06.4-Z05-0H1 E SCN-AT-FLT18.1-W01-0H1-R E SCN-A5-FLT19.0-Z01-0H1-R E SCN-AT-FLT A1-R E SCN-AT-FLT H1-R E SCN-AT-FLT06.4-Z06-0H1-R E SCN-A5-FLT12.1-PT2-0H1-R E SCN-AT-FLT15.0-Z07-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT15.6-F01-0H0-R E SCN-A5-FLT08.4-PT1-0H1-R E SCN-AT-FLT12.1-DIG-0H1-R E SCN-AT-FLT12.1-Z14-0H1 RC Rev. F, Page 18 of 21
19 E SCN-A5-FLT17.1-Z04-0H1-R E SCN-A5-FZW22.0-Z01-0H1-R E SCN-A5-FLT A1-R E SCN-A5-FLT15.1-Z01-0H1-R E SCN-AT-FLT19.0-Z02-0H1-R E SCN-A5-FLT10.4-Z04-0H1-R E SCN-AT-FLT15.1-ADS-0H1-R E SCN-AT-FLT H1-R E SCN-AT-FLT A1-R E SCN-A5-FLT05.7-Z30-0H1-R E SCN-A5-FLT15.0-F02-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT H1-R E SCN-AT-FLT A1-R E SCN-AT-FLT08.4-W01-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT06.4-Z06-0H1-R E SCN-AT-FLT19.0-Z01-0H1-R E SCN-A5-FLT15.3-Z01-0H1-R E SCN-AT-FLT10.4-Z05-0H1-R E SCN-AT-FLT H1-R E SCN-A5-FLT17.1-F02-0H1-R E SCN-AT-FLT15.1-ZPM-0H1-R E SCN-AT-FLT05.7-Z01-0H1-R E SCN-A5-FLT17.0-Z01-0H1-R E SCN-A5-FLT10.4-Z14-0H1-R E SCN-A5-FLT10.4-WAG-0H1-R E SCN-A5-FLT05.7-Z04-0H1-R E SCN-A5-FLT12.1-PT1-0H1-R E SCN-A5-FLW15.6-Z01-0H1-R E SCN-AT-FLT20.1-Z02-0H1 E SCN-A5-FLT12.1-Z04-0H1-R E SCN-A5-FLT10.4-0S1-0H1-R E SCN-A5-FLT05.7-Z32-0H1-R E SCN-A5-FLT12.1-Z11-0H1-R E SCN-AT-FLT10.4-Z06-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT17.0-F02-0H1-R E SCN-A5-FLT10.4-Z06-0H1-R E SCN-AT-FLT12.1-Z02-0H1 RC Rev. F, Page 19 of 21
20 E SCN-A5-FLT15.0-PT0-0H1-R E SCN-AT-FLT12.1-Z02-0H1-R E SCN-A5-FLT15.0-Z12-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT15.1-ZPM-0H1-R E SCN-AT-FLT12.1-Z11-0H1 E SCN-A5-FLT H1-R E SCN-A5-FZT15.0-SY1-OH1-R E SCN-AT-FLW18.5-Z01-0H1-R E SCN-AT-FLT08.4-P01-0H1-R E SCN-A5-FLT12.1-Z14-0H1-R E SCN-A5-FLT12.1-SL0-0H1-R E SCN-A5-FLT H1-R E SCN-A5-FLT10.4-DUM-0H1-R E SCN-A5-FLT19.0-Z10-0H1-R F SCN-AT-FLT18.1-W01-0H1 F SCN-AT-FLT15.0-Z02-0H1 F SCN-AT-FLT18.1-Z01-0H1 F SCN-AT-FLT06.4-Z01-0H1 F SCN-AT-FLT17.1-W01-0H1 F SCN-AT-FLT12.1-PT1-0H1 F SCN-AT-FLT06.4-Z08-0H1 F SCN-AT-FLT15.0-RAD-0H1 F SCN-AT-FLT15.0-Z06-0H1 RC Rev. F, Page 20 of 21
21 REVISION HISTORY Document Rev ECO Date Description A 5506 November 22, 2005 Initial release B ECO June 25, 2007 Added tic-tac-toe chart and EPUP C ECO November 6, 2007 Minor document corrections D ECO September 28, 2011 Document branding update. Updated tic-tac-toe chart E ECO March 27, 2014 Document b randing update. Updated tic-tac-toe chart. Updated referenced RoHS spec to 2011/65/EU (RoHS2) F ECO-16-tbd Jun 10, 2016 Updated TUV certificate number. Added REACH information. RC Rev. F, Page 21 of 21
Impact Torque Meters HIT-Series
Impact Torque Meters HIT-Series HIT-200 HIT-500 HIT-2000 Owner s Manual (December, 2016) 16A 1-16-5 Akiyama, Matsudo City, Chiba Pref., Japan TEL: 81-47-392-2001 FAX: 81-47-392-7773 Operation Manual No.:
More informationLV REMOTE CONTROLLER INSTRUCTION MANUAL
LV 7800-01 REMOTE CONTROLLER INSTRUCTION MANUAL TABLE OF CONTENTS 1. INTRODUCTION... 1 1.1 Scope of Warranty... 1 1.2 Power Supply Voltage... 1 1.3 Trademarks... 1 2. SPECIFICATIONS... 2 2.1 General...
More informationPremium Complete Rework Station with Electric Pump
www.jbctools.com INSTRUCTION MANUAL Premium Complete Rework Station with Electric Pump Ref. RMSE-E Packing List The following items should be included: JTSE Control Unit... 1 u Ref. JTSE-1A (100V - 120V)
More informationLT 9213A LCD FLICKER CHECKER INSTRUCTION MANUAL
LT 9213A LCD FLICKER CHECKER INSTRUCTION MANUAL TABLE OF CONTENTS GENERAL SAFETY SUMMARY... I 1. PRECAUTIONS...1-1 1.1 Supply Voltage and Fuses...1-1 1.2 Maximum Allowable voltage on input Terminal...1-1
More informationBar Code Scanner. Quick Start Guide QS Rev A 3/12
5800 Bar Code Scanner Quick Start Guide 5800-QS Rev A 3/12 Getting Started Turn off the computer s power before connecting the scanner, then power up the computer once the scanner is fully connected. Connecting
More informationThe Torque Value Checking Meters For Automatic Controlled System HM-10 HM-100
The Torque Value Checking Meters For Automatic Controlled System HM-10 HM-100 Operation Manual (As of December 2016) 16A 1-16-5 Akiyama, Matsudo City, Chiba Pref., Japan TEL: 81 (Japan) 47-392-2001 FAX:
More informationModel HT640B02. High Temperature 4-20 ma Output Velocity Sensor. Installation and Operating Manual
Model HT640B02 High Temperature 4-20 ma Output Velocity Sensor Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics, Inc. Toll-free: 800-959-4464
More informationAGQ300-48S1V2 DC/DC Converter. Technical Reference Notes
AGQ300-48SV2 DC/DC Converter Technical Reference Notes Industry standard quarter brick: 36V~75V input,.2v single output Features Industry standard quarter brick (open-frame) 2.28.45 0.4 (open-frame) 2.28.45
More informationAGQ200-48S1V5 DC/DC Converter. Technical Reference Notes
AGQ200-48S1V5 DC/DC Converter Technical Reference Notes Industry standard quarter brick: 36V~75V input, 1.5V single output Features Industry standard quarter brick (open-frame) 2.28 1.45 0.39 (open-frame)
More informationIF THE EQUIPMENT IS USED IN A MANNER NOT SPECIFIED BY X-RITE PANTONE, THE PROTECTION PROVIDED BY THE EQUIPMENT MAY BE IMPAIRED
EN Operation Manual Register your product and get access to important product updates, exclusive content, service support, and other tools to help you get the most of your product. www.xrite.com/registration
More informationMAx1-720x Two-Position, MFx Floating, MSx Proportional Series SmartX Actuators Linear Spring Return
Selection Guide MAx-70x Two-Position, MFx-703 Floating, MSx-703 Proportional Series SmartX Actuators Linear Spring Return schneider-electric.com Application Linear SmartX Actuators are designed to mount
More informationOperation Manual. Checking the Package Contents. Electronic Load Booster PLZ2004WB PLZ2004WHB. Accessories (PLZ2004WB) About the Operation Manual
Operation Manual Electronic Load Booster PART NO. Z-005-60, IB076 Nov. 06 Checking the Package Contents When you receive the product, check that all accessories are included and that the product and accessories
More informationAGQ300-48S1V2 DC/DC Converter. Technical Reference Notes
AGQ300-48SV2 DC/DC Converter Technical Reference Notes Industry standard quarter brick: 36V~75V input,.2v single output Features Industry standard quarter brick (open-frame) 2.28.45 0.4 (open-frame) 2.28.45
More informationHIOS Digital Torque Meters HP-100 HP-10 HP-1 ( ) Option. Operation manual. (May 2018) 18A. No. ET-C006
HIOS Digital Torque Meters HP-100 HP-10 HP-1 ( ) Option Operation manual (May 2018) 18A No. ET-C006 Contents Applications and features of HIOS Digital Torque Meters...1 Safety Precautions... 2 HIOS Digital
More informationRobot System. Safety and Installation. Robot Controller Control Unit RC700 RC700-A Drive Unit RC700DU RC700DU-A. Programming Software EPSON RC+7.
Robot System Safety and Installation Read this manual first Rev.14 EM174B3448F Robot Controller Control Unit RC700 RC700-A Drive Unit RC700DU RC700DU-A Programming Software EPSON RC+7.0 Manipulator G1
More informationValveMate 8040 Controller Operating Manual
A NORDSON COMPANY ValveMate 8040 Controller Operating Manual 8040 SPRAY VALVE CONTROLLER To order ValveMate 8040 controller, refer to part #7022120. Electronic pdf files of EFD manuals are also available
More informationE30 Series. Installation Guide Power Monitoring. Branch Circuit Power Meter. Product Overview. Product Identification.
Z4998-0P Page 1 of 49 15 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com 0815 Installation Guide Power Monitoring Product Overview E30 Series Branch Circuit Power Meter Other current
More informationRobot System. Safety and Installation. Robot Controller RC90 Programming Software EPSON RC Manipulator LS series (LS3 / LS6 / LS20)
Robot System Safety and Installation Read this manual first Rev.10 EM174B3450F Robot Controller RC90 Programming Software EPSON RC+ 7.0 Manipulator LS series (LS3 / LS6 / LS20) Robot System Safety and
More informationAVO100-48S1V5 DC/DC Converter. Technical Reference Note
AVO00-48SV5 DC/DC Converter Technical Reference Note Industry standard eighth brick: 36~75v input,.5v single output Features Industry standard eighth brick : 2.28 0.9 0.36 Options Choice of positive logic
More informationValveMate 7094DC Auger Valve Controller Operating Manual
A NORDSON COPANY Valveate 7094DC Auger Valve Controller Operating anual VALVEAT E 7094DC AUGER VALVE CONTROLLER Electronic pdf files of EFD manuals are also available at www.efd-inc.com Introduction The
More information794 Series Auger Valve
794 Series Auger Valve Operating Manual Electronic pdf files of Nordson EFD manuals are also available at www.nordsonefd.com You have selected a reliable, high-quality dispensing system from Nordson EFD,
More information781RC MicroMark Recirculating Spray Marking System
781RC MicroMark Recirculating Spray Marking System Operating Manual Electronic pdf files of Nordson EFD manuals are also available at nordsonefd.com Contents Contents...2 Safety Warnings...3 Equipment
More informationValveMate 8040 Controller
ValveMate 8040 Controller Operating Manual 8040 SPRAY VALVE CONTROLLER To order ValveMate 8040 controller, refer to part #7022120. IMPORTANT! Save this Sheet. Forward to Maintenance or Tool Crib Supervisors
More informationModel ADB FATIGUE RATED LOW PROFILE LOAD CELL, DUAL BRIDGE. Installation and Operating Manual
Model 1403-05ADB FATIGUE RATED LOW PROFILE LOAD CELL, DUAL BRIDGE Installation and Operating Manual For assistance with the operation of this product,contact: PCB Load & Torque, Inc. Toll-free: 866-684-7107
More informationValveMate 7060RA Controller
Valveate 7060RA Controller Operating anual A NORDSON COPANY VALVEATE 7060RA For order purpose, please refer to this # 7014235 IPORTANT! Save this Sheet. Forward to aintenance or Tool Crib Supervisors Electronic
More informationValveMate 8040 Controller
ValveMate Controller Operating Manual Electronic pdf files of Nordson EFD manuals are also available at www.nordsonefd.com ValveMate Controller You have selected a reliable, high-quality dispensing system
More informationCartridge Filling System
Cartridge Filling System Operating Manual www.nordsonefd.com info@nordsonefd.com USA & Canada: 800.556.3484 Europe: +44 (0) 1582 666334 Asia & China: +86 (21) 3866 9006 Sales and service of Nordson EFD
More informationForce Band USER MANUAL
Product Information Guide This Important Product Information Guide contains safety, handling, disposal, recycling, and regulatory information as well as the limited warranty for Force Band. Read all safety
More informationSAFETY PRECAUTIONS PRECAUTIONS DE SECURITE
AC -V SGDV- F A SGDV- A SGDV- D A AC SERVOPACK -V SERIES SAFETY PRECAUTIONS Type SGDV- F A SGDV- A SGDV- D A To properly use the product, read this manual thoroughly and retain for easy reference, inspection,
More informationY/11GM Pneumatic Gauge Pressure Transmitter
User s Manual Y/11GM Pneumatic Gauge Pressure Transmitter 12th Edition i Y/11GM Pneumatic Gauge Pressure Transmitter 12th Edition CONTENTS 1. Introduction... 1-1 1.1 Safety Precautions...1-2 1.2 Warranty...1-2
More informationEJX and EJA-E Series Differential Pressure and Pressure Transmitters Installation Manual. Contents 1. Introduction. 3. Installation. 5.
User s Manual EJX and EJA-E Series Differential Pressure and Pressure Transmitters Installation Manual Contents 1. Introduction 1.1 For Safe Use of Product...2 1.2 Warranty...4 1.3 ATEX Documentation...5
More informationValveMate 7194 Auger Valve Controller
ValveMate 7194 Auger Valve Controller Operating Manual Electronic pdf files of Nordson EFD manuals are also available at www.nordsonefd.com You have selected a reliable, high-quality dispensing system
More informationInternational 9/8/11 WORKING PAPER Edition battery or the exposed to prevent 1.3 (5 页 ) C
International Civil Aviation Organization DGP/23-WP/16 9/8/11 WORKING PAPER DANGEROUS GOODS PANEL (DGP) TWENTY-THIRD MEETING Montréal, 111 to 21 October 2011 Agenda Item 2: Development of recommendations
More informationValveMate 7160RA Radial Valve Controller
Operating Manual Electronic pdf files of Nordson EFD manuals are also available at www.nordsonefd.com You have selected a reliable, high-quality dispensing system from Nordson EFD, the world leader in
More informationUltimus IV Series Dispensing System
Ultimus IV Series Dispensing System User s Guide Ultimus IV-3cc #7017178 Ultimus IV-5cc #7017181 Ultimus IV-10cc #7017177 Ultimus IV-30cc #7017179 Electronic pdf files of EFD manuals are also available
More informationContact: Customer Service Phone: Fax: esales.electrocube.com Website:
Supplier: Electrocube, Inc., 3366 Pomona Blvd., Pomona, California 91768 Contact: Customer Service Phone: 909-595-4037 Fax: 909-595-0186 Email: esales..com Website: www..com Date: 01/02/13 Quality Assurance
More informationUltimus IV Series. User s Guide. Dispensing System. Ultimus IV-3cc # Ultimus IV-5cc # Ultimus IV-10cc #
Ultimus IV Series Dispensing System User s Guide Ultimus IV-3cc #7017178 Ultimus IV-5cc #7017181 Ultimus IV-10cc #7017177 Ultimus IV-30cc #7017179 IMPORTANT! Save this Sheet. Forward to Maintenance or
More informationFor Motor Starting Use Schneider Electric Overload Relay Series LR. WARNING
LC / LC D5 D50 www.schneider-electric.com Contacteurs / Contacteurs-inverseurs Contactors / Reversing contactors Schütze / Wendeschütze Contattori / Teleinvertitori Contactores / Contactores-inversores
More informationHow to get started. with. Kongsberg XP Auto systems. Serial number: Please Read This First
How to get started with Kongsberg XP Auto systems Serial number: Please Read This First Note We remind you that only the Esko staff, or persons having received appropriate training, are allowed to handle,
More informationPackaging 22Mar11 Rev Y Specification MOD JACK ASSY, VERTICAL, COMPLIANT PIN, 8 POSN
Packaging 22Mar11 Rev Y Specification MOD JACK ASSY, VERTICAL, COMPLIANT PIN, 8 POSN 1. PURPOSE 目的 Define the packaging specifiction and packaging method of MOD JACK ASSY, VERTICAL, COMPLIANT PIN, 8 POSN
More informationAluminum Capacitors, Power High Ripple Current, Screw Terminals
Aluminum Capacitors, Power High Ripple Current, Screw Terminals FEATURES Long useful life: 10 000 h to 15 000 h at +85 C Available in case sizes up to Ø 90 mm x 220 mm Polarized aluminum electrolytic capacitors,
More informationAmendment to legal inspection regulations of automotive video cameras, other audio-frequency electric amplifiers and head-mounted monitors
Amendment to legal inspection regulations of automotive video cameras, other audio-frequency electric amplifiers and head-mounted monits By the Bureau of Standards, Metrology and Inspection (BSMI), Ministry
More informationJINLONG MACHINERY & ELECTRONICS
JINLONG MACHINERY & ELECTRONICS sales@jinlong-machinery.com SPECIFICATION /Spec No. /Description /Part No. /Cylindrical DC motor JQ24-35K270B /Designed /Checked /Approved 2009.05.12 2009.05.12 2009.05.12
More informationSHENZHEN TIMEWAY TESTING LABORATORIES
Report No: File reference No: TW1609018 2016-09-08 Applicant: Product: Model No: Brand Name: Test Conclusions: Fold Cable MO8887 N/A Based on the verification results of the submitted samples, the test
More informationHedge trimmers (combustion engine powered)
Compliance Guide Rev.2.1 Edition 04/2018 Hedge trimmers (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 706 82 37 This
More informationFilm Dielectric Trimmers
TEST VOLTAGE (DC) FOR 1 MINUTE: 5 V MAXIMUM CONTACT RESISTANCE: 5 mω MINIMUM INSULATION RESISTANCE: 1 MΩ FEATURES High temperature type Housing dimensions: 1 mm x 11 mm x 11 mm For a basic grid of 2.54
More information9GV612G01 6x6x28 mm 12 V GV type Expected Life: 40,000 h (L10:Survival rate: 90% at 60 C, Tach output G speed : + red - black Sensor yellow Storage Temperature: -20 C to +70 C (Non-condensing) 9GV612G01
More informationSolar Solar. Solar Connector Catalog
Solar Solar Solar Connector Catalog /6/013 PAGE 01 TUV PAGE 0 ALTERNATIVE ENERGY SOLAR LOCKING CONNECTOR ORDERING NOMENCLATURE 1= ALTERNATIVE ENERGY SOLAR LOCKING, SOCKET = ALTERNATIVE ENERGY SOLAR LOCKING,
More informationSolid Tantalum Surface Mount, TANTAMOUNT, Molded Case, Very Low DCL
Solid Tantalum Surface Mount, TANTAMOUNT, Molded Case, Very Low DCL PERFORMANCE/ELECTRICAL CHARACTERISTICS www.vishay.com/doc?40088 Operating Temperature: - 55 C to + 125 C (above 85 C voltage derating
More informationNTC Thermistors, 2-Point Radial Leaded, Automotive Grade
NTC Thermistors, 2-Point Radial Leaded, Automotive Grade FEATURES High accuracy over a wide temperature range High stability over a long life Exceptional thermal shock withstanding performance AEC-Q200
More informationD4BS CSM_D4BS_DS_E_8_4
Safety-door Switch CSM DS_E_8_4 The Special Activates a Direct Opening Mechanism to Open the Contacts and Shut Off Control Circuits when Protective Doors Are Opened on Machine Tools or Other Equipment
More informationSPECIFICATION FOR APPROVAL
THINKING ELECTRONIC INDUSTRIAL CO., LTD. HEAD OFFICE: 8F-1, No.93, Ta-Shun 1st Rd., Kaohsiung, Taiwan TEL: 886-7-5577660 FAX: 886-7-5570560 MANUFACTURING SITE KAOHSIUNG FACTORY: No.51, Kaifa Road, Nantze
More informationChain-saws (combustion engine powered)
Compliance Guide Rev.4.2, Edition 04/2018 Chain-saws (combustion engine powered) European Garden Machinery Federation EGMF Bd Reyers 80, 1030 Brussels, Belgium secretariat@egmf.org +32 2 206 68 66 This
More informationList of Attachments (including a total number of pages in each attachment): 附件清单 ( 含每个附件的总页数 ): - Photos documentation (1 page) - 产品图片 (1 页 )
age 2 of 13 Report No. 17NS05043 01001 List of Attachments (including a total number of pages in each attachment): 附件清单 ( 含每个附件的总页数 ): - hotos documentation (1 page) - 产品图片 (1 页 ) Summary of testing: 测试信息概要
More informationOperation Key D4BS - K Head Mounting Direction F: Four mounting directions possible (front-side mounting at shipping)
Safety-door Switch D4BS The Special Activates a Direct Opening Mechanism to Open the Contacts and Shut Off Control Circuits when Protective Doors Are Opened on Machine Tools or Other Equipment CSM_D4BS_DS_E_6_1
More informationA165E CSM_A165E_DS_E_11_2
Emergency Stop Switch (16-dia.) CSM DS_E_11_2 Separate Construction with Minimal Depth Direct opening mechanism to open contacts in emergencies, such as when they are welded. Conforms to EN 6947-5-5. Includes
More informationData Link Services Airworthiness and Conformance to Commission Regulation (EC) No 29/2009
Data Link Services Airworthiness and Conformance to Commission Regulation (EC) No 29/2009 Guidance to Applicants EUROCONTROL Disclaimer This material has been created by EUROCONTROL, EASA and EC as guidance
More informationVSM480. Instruction Manual VARIABLE SPEED MIXER. Read instructions before operating this tool.
VSM480 VARIABLE SPEED MIXER Instruction Manual Read instructions before operating this tool. Important Please read these operating and safety instructions carefully and completely. For your own safety,
More informationImpedance and Current Ranges
Features: Applications: Standard chip bead used to suppress lower frequency and lower current signals Offers impedance over a broad frequency range High current option available up to 6A Suitable for flow
More informationTillers Motor hoes (combustion engine powered)
Compliance Guide Rev.2.1, Edition 04/2018 This guide is intended to help market surveillance authorities with the checking of conformity of combustion engine powered brush-cutters and grass trimmers in
More informationElectrical Specifications 5mm. Ic (A) (V)
Features: AC operating voltage from 11V to 1000V DC operating voltage from 14V to 1465V Peak current up to 6500 amps Energy handling up to 625J UL1449 certified file no. E476752 Operating temperature range
More informationTechnical Report No D Dated
Client: Innokin Technology Co.,Ltd Address: Attn.: Building 6,XinXinTian Industrial Park, XinSha Road, ShaJing street,shenzhen, China George Sample Description: itaste 134 MX-M Model No.: / Contury of
More informationHigh Voltage Ceramic DC Disc Capacitors with Axial Leads, 10 kv DC to 30 kv DC
High Voltage Ceramic DC Disc Capacitors with Axial Leads, 10 kv DC to 30 kv DC FEATURES Available Class 1 and class 2 ceramic High insulation resistance Epoxy encapsulated Wide capacitance range Ceramic
More informationC E R T I F I C A T E O F C O M P L I A N C E
Issued to: SIEMENS AG I IA CE CP R&D-VI 4 WERNER-VON-SIEMENS-STRASSE 48 92220 AMBERG, GERMANY This is to certify that representative samples of Motor Controllers, Mechanically Operated and Solid-state
More informationAV / AVY Series Automotive SMD Varistor
Description: Almost all electronic systems in internal-combustion powered vehicles, e.g., anti-lock brakes, direct ignition, airbag control, wiper motors, etc. are susceptible to damage from destructive
More informationNATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA 中华人民共和国国家标准. Lubricating oils for turbines 涡轮机油
ICS 75.100 E 34 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA 中华人民共和国国家标准 GB 11120-2011 Replacing GB 11120-1989 Lubricating oils for turbines 涡轮机油 [ISO 8068: 2006, Lubricants9industrial oils and
More informationG3PE-Single-phase. Solid State Relays for Heaters
Solid State Relays for Heaters Single-phase CSM_Single-phase_DS_E Compact, Slim-profile SSRs with Heat Sinks. s with No Zero Cross for a Wide Range of Applications. RoHS compliant. s also available with
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2010-04-01 Page 1 of 8 Report Reference # E229738-A1-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: UL 60950-1, 2nd Edition, 2007-03-27 (Information Technology Equipment
More informationPOWER BANK 规格书 POWER BANK SPECIFICATION. Cell(1S2P)+Housing 电芯 (1S2P)+ 胶壳 MB 组合类型 : Product Model. 成品型号 : Pack Capacity (mah) Pack Type
POWER BANK 规格书 POWER BANK SPECIFICATION Pack Type Cell(1S2P)+Housing 组合类型 : Product Model 成品型号 : Pack Capacity (mah) 电芯 (1S2P)+ 胶壳 MB-5200 成品容量 (mah): 6000 Customer Code 客户代码 : Total Page 文件页数 : 9 Registered
More informationChapter 1. Structure and Features
Chapter 1 Structure and Features CONTENTS Page 1 History of IGBT structure 1-2 2 Module structure 1-4 3 Circuit configuration of IGBT module 1-5 4 Overcurrent limiting feature 1-6 5 RoHS compliance 1-6
More informationCertificate of Compliance of RoHS
270 Quaker Road East Aurora, NY 14052 Certificate of Compliance of RoHS This document certifies that the API Delevan part numbers identified and manufactured by API Delevan do not contain the substances
More informationSMD 0805, NTC Thermistors AgPd Terminations
NTCS0805E4.../2381 615 1... SMD 0805, NTC Thermistors AgPd REMARK Non preferred type (replaced by NTCS0805E3...T/2381 615 5...) QUICK REFERENCE DATA PARAMETER VALUE UNIT Resistance value at 25 C 2K to
More informationRide-on lawnmowers (combustion engine powered)
Compliance Guide Rev.2.3 Edition 04/2018 Ride-on lawnmowers (combustion engine powered) This guide is intended to help market surveillance authorities with the checking of conformity of combustion engine
More information9 mm Multi-Ganged Potentiometer
9 mm Multi-Ganged Potentiometer FEATURES Conductive plastic element Ultra compact (extra miniature module size) Multiple assemblies (up to seven modules) Shaft and panel sealed option Center mechanical
More informationFPRCL - 90V - 25 M S - 24/2
规格 Specification 型号 Model F 特点 Features 节省空间 50% 有 3 个不同配管位置可供选择 全系列均附磁 Equal forces on both ends of the piston. High cantilever and direct loads can be taken on piston. Multi ported endcaps as standard.
More informationN485J-3 船用柴油机组零件图册. (East China Shipbuilding Institute Factory) 镇江四洋柴油机制造有限公司 ( 原华东船院工厂 )
四洋 R N485J-3 Marine Diesel Engine Set Parts Catalogue N485J-3 船用柴油机组零件图册 ZHENJIANG SIYANG DIESEL ENGINE MANUFACTURING CO.,LTD CHINA (East China Shipbuilding Institute Factory) 镇江四洋柴油机制造有限公司 ( 原华东船院工厂 )
More informationCal. Y121E STANDARD 6 3/ mm. 2.99mm. 2 years. Watch Movement Specification and Drawing. Movement Size. Casing Diameter.
Watch Movement Specification and Drawing STANDARD Cal. Y121E Movement Size 6 3/4 8 Casing Diameter 15.3 17.8 mm Height 2.99mm Battery Life 2 years Cal. Y121E Date: 20/Oct./'14 Items Rev. Page Specifications
More informationCustomer Specification PART NO. V16110
Alpha Wire 711 Lidgerwood Avenue, Elizabeth, NJ 07207 Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com Customer Specification PART NO. V16110 Construction Diameters (In) 1) Component 1 4 X 1 COND a)
More informationAirworthiness Directive
Airworthiness Directive AD No.: 2016-0165 Issued: 12 August 2016 EASA AD No.: 2016-0165 Note: This Airworthiness Directive (AD) is issued by EASA, acting in accordance with Regulation (EC) 216/2008 on
More informationPower Panel 6 W Potentiometer
Power Panel 6 W Potentiometer FEATURES High power rating 6 W at 50 C Cermet element Full sealing Mechanical strength Industrial and professional grade Tests according to CECC 41000 or IEC 60393-1 Material
More informationQ-CELLS CIGS THIN FILM MODULES: HIGHEST EFFICIENCY IN THE MARKET
Q-CELLS CIGS THIN FILM MODULES: HIGHEST EFFICIENCY IN THE MARKET Votum Workshop, Prague, May 13, 2010 DISTRIBUTION LIST: WORK-SHOP PARTICIPANTS CONTENTS Q-CELLS CIGS MODULES: POWER, QUALITY AND AESTHETICS
More information323/324/325 Clamp Meter
323/324/325 Clamp Meter Users Manual PN 4045153 May 2012 2012 Fluke Corporation. All rights reserved. Printed in China. Specifications are subject to change without notice. All product names are trademarks
More informationSRP7030F Series - Shielded Power Inductors
*RoHS COMPLIANT 8R2 Features Shielded construction Flat wire Unit height as low as 3. mm Inductance range:.1 to 1 μh Rated current up to 32 A RoHS compliant* This series is currently available but not
More informationNational Environmental Protection Standard of the People s Republic of China 中华人民共和国国家环境保护标准
National Environmental Protection Standard of the People s Republic of China 中华人民共和国国家环境保护标准 HJ 438 2008 Durability of Emission Control Systems of Compression Ignition and Gas Fuelled Positive Ignition
More informationLP-ISM(L) Series. Features. Product Dimensions. Agency recognition: UL CSA TUV. Small size of Fast tripping resettable circuit protection
LP-ISM(L) Series Surface-mount devices Features Small size of 0805 Fast tripping resettable circuit protection Surface mount packaging for automated assembly Agency recognition: UL CSA TUV Product Dimensions
More informationProCS and ProC Series Heat Trace Panelboards
ProCS and ProC Series Heat Trace Panelboards Introduction Contents Introduction... 2 System Overview... 3 Certifications... 4 Heat Trace Panel Images... 4-5 AMC Heat Trace Panel (HTP) Selection Guide...
More information更多的机会来源于合作和创新 帝斯曼复合材料树脂集团严政华
更多的机会来源于合作和创新 帝斯曼复合材料树脂集团严政华 Page 1 排放的控制是推进轻量化的动因 新型柴油发动机车辆的排放标准将提升至欧 4, 欧 5 NOx emissions for New Types of Diesel Cars under Euro 5 and 6 NOx mg/km 390 280 250 180 125 80 0 Vans including heavy cars
More informationType Acceptance Report
TAR 18/21B/36 ROLLS-ROYCE TRENT 800 Series Aircraft Certification Unit TABLE OF CONTENTS EXECUTIVE SUMMARY 1 1. INTRODUCTION 1 2. PRODUCT CERTIFICATION DETAILS 2 3. APPLICATION DETAILS AND BACKGROUND
More informationType List. Standard Type. High Power Type. Designation (provided with) Terminal style Contact form Contact gap
Features 8A/1 miniature PCB Power Relay. Large contact gap : 2mm/. High dielectric strength and comply with IEC 16950. Epoxy seal type and sealed flux free are both available. Design for UPS and power
More informationTechnical Report No Rev. 00 Dated
Technical Report No. 64.164.14.01453.01 Rev. 00 Dated 2014-05-28 Client: ZhongShan LiangYi Lighting CO.,LTD BeiHai Industrial Zone,GuZhen Town,ZhongShan,GuangDong,P.R.China Test Subject: The submitted
More informationPP017/PP018 Passive Probe Instruction Manual
PP017/PP018 Passive Probe Instruction Manual 700 Chestnut Ridge Road Chestnut Ridge, NY, 10977-6499 Tel: (845) 425-2000, Fax: (845) 578 5985 www.teledynelecroy.com PP017/PP018 Passive Probe Instruction
More information1587 FC/1587/1577. Insulation Multimeter. Safety Information. Warnings
1587 FC/1587/1577 Insulation Multimeter Safety Information Go to www.fluke.com to register your Product and find more information. A Warning identifies conditions and procedures that are dangerous to the
More informationTechnical Report No A Dated
Client: Xiamen Guangpu Electronics Co.,Ltd Address: No.608,West Lingdou Road,Siming District,Xiamen,China. Attn.: Mr. Zhang Description: Panel light (LED PANEL LIGHT) Model No.: Country of origin: GPPS15033X,
More informationT75S5D Product Details
T75S5D112-12 Product Details Industrial Relays (General Purpose) Converted to EU RoHS but not ELV Compliant (Statement of Compliance) T75S5D112-12 TE Internal Number: 1393223-3 Active Product Highlights:
More informationDATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, NP0
Product Specification March 7, 2017 V.16 DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose Class 1, 16 V TO 50 V 0.22 pf to 100 nf RoHS compliant & Halogen Free Product specification
More information产品维修手册. Maintenance Service Manual 中国 厦门蒙发利科技有限公司 蒙发利集团 客服. Xiamen Comfort Science & Technology Co.,Ltd 产品型号 /MODEL: EC-320D
中国 厦门蒙发利科技有限公司 Xiamen Comfort Science & Technology Co.,Ltd 产品维修手册 Maintenance Service Manual 产品型号 /MODEL: EC-320D 适用电压规格 / voltage specification:220-240v 蒙发利集团 客服 By the Easepal`s Customer Service Dept.
More informationWELL SHIN TECHNOLOGY CO., LTD.
SQ WELL SHIN TECHNOLOGY CO., LTD. REVISION RECORD OF SPECIFICATION LIST 1. COVER 1 2. LIST 2 3. SPECIFICATION 3-5 4. BOM 6 5. FINISHED DRAWING 7-8 6. CABLE LICENCE 9-20 7. PLUG FINISHED DRAWING 21 8. PLUG
More informationTechnical Report No A Dated
Client: Xiamen Guangpu Electronics Co.,Ltd. Address: No.608, West Lingdou Road, Siming District, Xiamen, China. Attn.: Mr. Zheng Description: LED Panel Light Model No.: GPP0330934WP,GPP0330934WPB Country
More informationTokyo BILD., Marunouchi, Chiyoda-ku Tokyo JAPAN. Industrial Robot
EC-Statement of Compliance No. E6 9 7 25554 18 Product Service Holder of Certificate: Mitsubishi Electric Corporation Tokyo BILD., 2-7-3 Marunouchi, Chiyoda-ku Tokyo 1-831 JAPAN Name of Object: Industrial
More informationSurface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications ELECTRICAL SPECIFICATIONS FEATURES C0G (NP0) and X7R dielectrics offered C0G (NP0) is an ultra-stable dielectric offering a
More information