Innovative Machine Engine-Powered Forklift Trucks ton (Counter-Balanced Type) SPECIFICATIONS

Transcription

1 Innovative Machine Engine-Powered lift Trucks ton (Counter-Balanced Type) SPECIFICATIONS

2 STANDARD SPECIFICATIONS 1 Manufacturer UNICARRIERS UNICARRIERS Characteristics 2 3 Load Capacity kg Load Center Power Type Gasoline Gasoline 6 Operator Position Seated Seated 7 Tire Type Front / Rear Pneumatic Pneumatic FHG20C3 FHG20T3 FG35T3S Gasoline Gasoline Gasoline Gasoline Gasoline Seated Seated Seated Seated Seated pneumatic pneumatic pneumatic pneumatic Pneumatic 8 Wheels (x = driven) Front / Rear 2X / 2 2X / 2 2X / 2 2X / 2 2X / 2 2X / 2 2X / 2 9 Maximum Free Lift Size L W T Spread (Outside) Max. / Min / / / / / / / Tilt Angle Fwd. / Bwd. deg 6 / 12 6 / 12 6 / 12 6 / 12 6 / 12 6 / 12 6 / Length to Face Overall Width Dimensions Raised Overhead Guard (EXB,EXK) Overhead Guard (EXC,EXE,EXN) Operator's Seat Turning Radius (Outside) Load Distance (Centerline of front axle to front face of forks) Rear Overhang Basic Right Angle Stacking Aisle Width Travel, Max. (Fwd. / Rvs.) Full Load km/h No Load km/h Performance 25 Speeds Lifting 26 Lowering 28 Max. Drawbar Pull Full Load /sec No Load /sec Full Load /sec No Load /sec Full Load kn No Load kn Max. Gradeability* Full Load % No Load % Total Weight kg Weight 33 Full Load Weight Distribution 34 No Load Front kg Rear kg Front kg Rear kg Number Front / Rear 2 / 2 2 / 2 2 / 2 2 / 2 2 / 2 2 / 2 2 / 2 36 Tires Front PR(I) PR(I) Size 37 Rear PR(I) PR(I) PR(I) PR(I) PR(I) 28X PR(I) PR(I) PR(I) PR(I) PR(I) PR(I) PR(I) 38 Wheelbase Chassis & Wheels Front 39 Tread Rear Backrest 0 0 Overhead Guard Clearance 5 5 Counterweight Drawbar Pin Center Step / Floor 435 / / / / / / / Underclearance Min. with Load Center of Wheelbase Brake Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal 43 Parking Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever 45 Battery Voltage / Capacity (5HR) V/AH 12 / / / / / / / 30 Engine & Transmission 49 Make / GCT / K21 GCT / K21 50 Rated Horsepower / r.p.m. kw 34.6 / / Internal Rated Torque / r.p.m. N-m / / 1600 Combustion Number of Cylinder 4 4 Engine Piston Displacement cc Alternator output kw/amp 0.60 / / 50 Fuel Tank Capacity Type liter Transmission Type Manual Power-shift Manual Power-shift Stage Fwd.-Rvs GCT / K21 GCT / K25 GCT / K25 GCT / K25 GCT / K / / / / / / / / / / / / / / / Manual Power-shift Manual Power-shift Manual Power-shift Manual Power-shift Power-shift Operating Pressure For Attachments MPa (psi) * Computed values. 2

3 STANDARD SPECIFICATIONS 1 Manufacturer UNICARRIERS UNICARRIERS Characteristics 2 FD20C3Z FD20T3Z 3 Load Capacity kg Load Center Power Type Diesel 6 Operator Position Seated 7 Tire Type Front / Rear Pneumatic FD25C3Z FD25T3Z FD30C3Z FD30T3Z FD35T3S Diesel Diesel Diesel Seated Seated Seated Pneumatic Pneumatic Pneumatic 8 Wheels (x = driven) Front / Rear 2X / 2 2X / 2 2X / 2 2X / 2 9 Maximum Free Lift Size L W T Spread (Outside) Max. / Min / / / / Tilt Angle Fwd. / Bwd. deg 6 / 12 6 / 12 6 / 12 6 / Length to Face Overall Width Dimensions Raised Overhead Guard (EXB,EXK) 2070 Overhead Guard (EXC,EXE,EXN) Operator's Seat Turning Radius (Outside) Load Distance (Centerline of front axle to front face of forks) Rear Overhang Basic Right Angle Stacking Aisle Width Travel, Max. (Fwd. / Rvs.) Full Load km/h No Load km/h Performance 25 Speeds Lifting 26 Lowering 28 Max. Drawbar Pull Full Load /sec 530 No Load /sec 570 Full Load /sec 450 No Load /sec 550 Full Load kn No Load kn Max. Gradeability* Full Load % No Load % Total Weight kg Weight 33 Full Load Weight Distribution 34 No Load Front kg 4670 Rear kg 650 Front kg 1490 Rear kg Number Front / Rear 2 / 2 2 / 2 2 / 2 2 / 2 36 Tires Front PR(I) Size 37 Rear PR(I) PR(I) PR(I) PR(I) PR(I) PR(I) PR(I) 38 Wheelbase Chassis & Wheels Front 39 Tread Rear Backrest 0 Overhead Guard Clearance 5 Counterweight 1110 Drawbar Pin Center 530 Step / Floor 435 / / / / Underclearance Min. with Load Center of Wheelbase Brake Service (Foot) Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal Hydraulic-Foot pedal 43 Parking Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever Mechanical-Hand lever 45 Battery Voltage / Capacity (5HR) V/AH 12 / / / / 64 Engine & Transmission 49 Make / ISUZU / C0 50 Rated Horsepower / r.p.m. kw 35.4 / Internal Rated Torque / r.p.m. N-m 140 / 1800 Combustion Number of Cylinder 4 Engine Piston Displacement cc Alternator output kw/amp 0.54 / 45 Fuel Tank Capacity Type liter Transmission Type Manual Power-shift Stage Fwd.-Rvs ISUZU / C0 ISUZU / C0 UD TRUCKS / QD / / / / / / / / / Manual Power-shift Manual Power-shift Power-shift Operating Pressure For Attachments MPa (psi) * Computed values. 4

4 Wide View Wide View VM Rated Capacity/ 500 load center (kg) Max. Overall Tilting (1) Service weight(kg) / FD20T3Z / FD25T3Z Raised Angle / FD20C3Z / FD25C3Z with Backrest PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) deg S DD SDD S DD SDD VM VM VM VM VM VM VM VM *2000 *2000 *2500 * VM *1950 *1950 *50 * VM *1850 *1850 *2350 *2350 * VM * *50 *50 * VM550 *1500 *1500 * * VM600 *1300 *1300 *1400 * (1) Weight for diesel model:+110kg(c0) Wide View Full Free 2-Stage VFM Rated Capacity/ 500 load center (kg) Max. Overall / FD20T3Z / FD25T3Z lift with Angle (1)Raised / FD20C3Z / FD25C3Z PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) deg S DD SDD S DD SDD VFM VFM VFM VFM VFM VFM VFM VFM *2000 *2000 *2500 * VFM *1950 *1950 *50 * VFM *1850 *1850 *2350 *2350 * VFM * *50 *50 * VFM550 *1500 *1500 * * VFM600 *1300 *1300 *1400 * (1) For height without backrest: -385 (2) For free lift without backrest: +385 (3) Weight for without backrest: -20kg Weight for diesel model: +110kg(C0) Wide View Wide View Full Free 2-Stage VFW (4CYLINDER) Rated Capacity/ 500 load center (kg) Max. Overall / FD20T3Z / FD25T3Z lift with Angle (1)Raised / FD20C3Z / FD25C3Z PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) deg S DD SDD S DD SDD VFW VFW VFW VFW * *1900 * VFW * * *2350 (1) For height without backrest: -455 (2) For free lift without backrest: +455 (3) Weight for without backrest: -20kg Weight for diesel model: +110kg(C0) 2300 * Wide View Full Free 3-Stage VFHW (4CYLINDER) VHW435 VHW480 VHW500 VHW540 VHW550 * Rated Capacity/ 500 load center (kg) Max. Overall / FD20T3Z / FD25T3Z lift with Angle (1)Raised / FD20C3Z / FD25C3Z PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) deg S DD SDD S DD SDD * *1900 *1900 *00 * * *1900 *1900 *2300 * * *1800 *1800 *50 * *1750 *1750 *2150 * *1750 *1750 *2 * (1) For height without backrest: -455 (2) For free lift without backrest: +455 (3) Weight for without backrest: -20kg Weight for diesel model: +110kg(C0) Lifting speed with VFM/VFHM mast: with VFM FG 450/s with load. 490/s without load. FD 440/s with load. 480/s without load. with VFHM FG 460/s with load. 510/s without load. FD 450/s with load. 500/s without load. Lowering speed with VFM/VFHM mast: 420/s with load. 380/s without load. Overall vehicle length with VFW/VFHW(4CYLINDER) mast: +35 longer than of standard model with VM mast. Wide View Full Free 3-Stage VFHM Rated Capacity/ 500 load center (kg) Max. Overall / FD20T3Z / FD25T3Z lift with Angle (1)Raised / FD20C3Z / FD25C3Z PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) deg S DD SDD S DD SDD VFHM VFHM VFHM *2000 *2000 *00 * VFHM *1900 *1900 *2300 * VFHM *1800 *1800 *50 * VFHM *1750 *1750 *2150 * VFHM *1650 *1650 *1800 * VFHM650 *1500 *1500 *1550 * * VFHM700 *1250 *1250 *1250 * * (1) For height without backrest: -455 (2) For free lift without backrest: +455 (3) Weight for without backrest: -20kg Weight for diesel model: +110kg(C0) 5 Service weight of VM/VFM and of VFHM represents the weight of vehicles equipped with SDD:special dual tires. Lifting speed with VFM/VFHM mast: with VFM FG 480/s with load. 520/s without load. FD 440/s with load. 500/s without load. with VFHM FG 500/s with load. 540/s without load. FD 460/s with load. 520/s without load. Lowering speed with VFM/VFHM mast: 400/s with load. 350/s without load. Overall vehicle length with VFHM mast: +15 longer than of standard model with VM/VFM mast. 6

5 Wide View Wide View VM Rated Capacity/ 500 load center (kg) Max. Overall Tilting (1) Service weight(kg) Raised Angle / FD30C3Z with Backrest PNEUMATIC UNIQUE(SE) deg S DD SDD VM VM VM VM VM VM VM VM VM VM * VM *2850 * VM550 *00 * VM600 *2000 * (1) Weight for diesel model:+120kg(c0) Wide View Full Free 2-Stage VFM Rated Capacity/ 500 load center (kg) Max. Overall / FD30C3Z PNEUMATIC UNIQUE(SE) deg S DD SDD VFM VFM VFM VFM VFM VFM VFM VFM VFM VFM * VFM *2850 * VFM550 *00 * VFM600 *2000 * (1) For height without backrest: -520 (2) For free lift without backrest: +520 Weight for diesel model:+120kg(c0) Wide View Wide View Full Free 2-Stage VFW (4CYLINDER) Rated Capacity/ 500 load center (kg) Max. Overall / FD30C3Z PNEUMATIC UNIQUE(SE) deg S DD SDD VFW VFW VFW VFW VFW (1) For height without backrest: -580 (2) For free lift without backrest: +580 Weight for diesel model:+120kg(c0) Wide View Full Free 3-Stage VFHW (4CYLINDER) VHW435 VHW480 VHW500 VHW540 VHW550 Rated Capacity/ 500 load center (kg) Max. Overall / FD30C3Z PNEUMATIC UNIQUE(SE) deg S DD SDD * * *2650 * *2600 * (1) For height without backrest: -580 (2) For free lift without backrest: +580 Weight for diesel model: +120kg(C0) Lifting speed with VFM/VFHM mast: with VFM FG 360/s with load. 420/s without load. FD 370/s with load. 390/s without load. with VFHM FG 380/s with load. 430/s without load. FD 310/s with load. 410/s without load. Lowering speed with VFM/VFHM mast: 400/s with load. 350/s without load. Overall vehicle length with VFW/VFHW(4CYLINDER) mast: +35/+45 longer than of standard model with VM mast. Wide View Full Free 3-Stage VFHM Rated Capacity/ 500 load center (kg) Max. Overall / FD30C3Z PNEUMATIC UNIQUE(SE) deg S DD SDD VFHM VFHM VFHM VFHM VFHM * VFHM *2650 * VFHM *2 * VFHM650 * * * VFHM700 *1350 * * (1) For height without backrest: -580 (2) For free lift without backrest: +580 Weight for diesel model: +120kg(C0) 7 Service weight of VM/VFM and of VFHM represents the weight of vehicles equipped with SDD:special dual tires. Lifting speed with VFM/VFHM mast: with VFM FG 420/s with load. 440/s without load. FD 400/s with load. 410/s without load. with VFHM FG 430/s with load. 450/s without load. FD 420/s with load. 430/s without load. Lowering speed with VFM/VFHM mast: 400/s with load. 350/s without load. Overall vehicle length with VFHM mast: +15 longer than of standard model with VM/VFM mast. 8

6 Wide View Wide View VM Rated Capacity/ 500 load center(kg) Max. Overall Tilting Service weight(kg) FHG20T3 FHG20C3 (1) Raised with Backrest Angle FHG20T3 FHG20C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) deg S DD SDD S DD SDD S DD SDD VM VM VM VM VM VM VM VM *2000 *2000 *2500 * VM *1950 *1950 *50 * VM *1850 *1850 *2350 *2350 * VM * *50 *50 *2850 * VM550 *1500 *1500 * * *00 * VM600 *1300 *1300 *1400 *1400 *2000 * (1) Figures for 2t, 2.5t model. For 3t model +45 Wide View Full Free 2-Stage VFM Rated Capacity/ 500 load center(kg) Max. Overall (3)Free lift Tilting (4) Service weight(kg) FHG20T3 (1) (2)Raised with Angle FHG20T3 FHG20C3 FHG20C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) deg S DD SDD S DD SDD S DD SDD VFM VFM VFM VFM VFM VFM VFM VFM *2000 *2000 *2500 * VFM *1950 *1950 *50 * VFM *1850 *1850 *2350 *2350 * VFM * *50 *50 *2850 * VFM550 *1500 *1500 * * *00 * VFM600 *1300 *1300 *1400 *1400 *2000 * (1) Figures for 2t, 2.5t model. For 3t model +45 (2) Figures for 2t, 2.5t model. For 3t model +230 For height without backrest: 2t, 2.5t model -385, 3t model -520 (3) Figures for 2t, 2.5t model. For 3t model -180 For free lift without backrest: 2t, 2.5t model +385, 3t model +520 (4) Weight for without backrest: 2t, 2.5t model -20kg, 3t model -30kg Wide View Full Free 3-Stage VFHM Rated Capacity/ 500 load center(kg) Max. Overall (3)Free lift Tilting (4) Service weight(kg) FHG20T3 (1) (2)Raised with Angle FHG20T3 FHG20C3 FHG20C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) deg S DD SDD S DD SDD S DD SDD VFHM VFHM VFHM *2000 *2000 *00 * VFHM *1900 *1900 *2300 * VFHM *1800 *1800 *50 *50 * VFHM *1750 *1750 *2150 *2150 *2650 * VFHM *1650 *1650 *1800 *1800 *2 * VFHM650 *1500 *1500 *1550 *1550 * * * VFHM700 *1250 *1250 *1250 *1250 *1350 * * (1) Figures for 2t, 2.5t model. For 3t model +45 (2) Figures for 2t, 2.5t model. For 3t model +230 For height without backrest: 2t, 2.5t model -455, 3t model -580 (3) Figures for 2t, 2.5t model. For 3t model -180 For free lift without backrest: 2t, 2.5t model +455, 3t model +580 (4) Weight for without backrest: 2t, 2.5t model -20kg, 3t model -30kg Wide View Wide View Full Free 2-Stage VFW (4CYLINDER) Rated Capacity/ 500 load center(kg) Max. Overall (3)Free lift Tilting (4) Service weight(kg) FHG20T3 (1) (2)Raised with Angle FHG20T3 FHG20C3 FHG20C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) deg S DD SDD S DD SDD S DD SDD VFW VFW VFW VFW * *1900 * VFW * * * * (1) Figures for 2t, 2.5t model. For 3t model +80 (2) Figures for 2t, 2.5t model. For 3t model +230 For height without backrest: 2t, 2.5t model -455, 3t model -580 (3) Figures for 2t, 2.5t model. For 3t model -145 For free lift without backrest: 2t, 2.5t model +455, 3t model +580 (4) Weight for without backrest: 2t, 2.5t model -20kg, 3t model -30kg Wide View Full Free 3-Stage VFHW (4CYLINDER) VHW435 VHW480 VHW500 VHW540 VHW550 * Rated Capacity/ 500 load center(kg) Max. Overall (3)Free lift Tilting (4) Service weight(kg) FHG20T3 (1) (2)Raised with Angle FHG20T3 FHG20C3 FHG20C3 PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) PNEUMATIC UNIQUE(SE) deg S DD SDD S DD SDD S DD SDD * *1900 *1900 *00 * * *1900 *1900 *2300 *2300 * * *1800 *1800 *50 *50 * *1750 *1750 *2150 *2150 *2650 * *1750 *1750 *2 *2 *2600 * (1) Figures for 2t, 2.5t model. For 3t model +80 (2) Figures for 2t, 2.5t model. For 3t model +230 For height without backrest: 2t, 2.5t model -455, 3t model -580 (3) Figures for 2t, 2.5t model. For 3t model -145 For free lift without backrest: 2t, 2.5t model +455, 3t model +580 (4) Weight for without backrest: 2t, 2.5t model -20kg, 3t model -30kg Lifting speed with VFM/VFHM mast: with VFM 2t, 2.5t model 450/s with load. 490/s without load. 3t model 410/s with load. 440/s without load. with VFHM 2t, 2.5t model 460/s with load. 510/s without load. 3t model 430/s with load. 460/s without load. Lowering speed with VFM/VFHM mast: 2t, 2.5t, 3t model 400/s with load. 350/s without load. Overall vehicle length with VFW/VFHW(4CYLINDER) mast(2t 2.5t model): +35 longer than of standard model with VM mast. (3t model): +35/+45 longer than of standard model with VM mast. NOTE(P.9) : Service weight of VM/VFM and of VFHM represents the weight of vehicles equipped with SDD: special dual tires. Lifting speed with VFM/VFHM mast: with VFM 2t, 2.5t model 530/s with load. 560/s without load. 3t model 450/s with load. 470/s without load. with VFHM 2t, 2.5t model 560/s with load. 580/s without load. 3t model 460/s with load. 480/s without load. Lowering speed with VFM/VFHM mast: 2t, 2.5t, 3t model 400/s with load. 350/s without load. Overall vehicle length with VFM mast: +15 longer than of standard model with VM mast. 9 10

7 Wide View STANDARD EQUIPMENT AND ACCESSORIES OPTIONAL LOADING ATTACHMENT OPTIONAL EQUIPMENT AND ACCESSORIES Wide View VM Rated Capacity / 500 load center(kg) Max. Overall Tilting (1) Service weight(kg) Raised Angle FG/D35T3S Lowerd with Backrest FG35T3S PNEUMATIC UNIQUE(SE) deg S DD VM VM VM VM VM VM VM VM VM VM VM VM550 *3200 * VM600 *00 * (1) Weight for diesel model: +120kg(QD32) Wide View Full Free 2-Stage VFM Rated Capacity / 500 load center(kg) Max. Overall FG/D35T3S Lowerd FG35T3S PNEUMATIC UNIQUE(SE) deg S DD VFM VFM VFM VFM VFM VFM VFM VFM VFM VFM VFM VFM VFM600 *00 * (1) For height without backrest: -445 (2) For free lift without backrest: +445 Weight for diesel model: +120kg(QD32) Wide View Full Free 3-Stage VFHM Rated Capacity / 500 load center(kg) Max. Overall FG/D35T3S Lowerd FG35T3S PNEUMATIC UNIQUE(SE) deg S DD VFHM VFHM VFHM VFHM VFHM VFHM *3200 * VFHM *00 * VFHM650 *2000 * * VFHM700 *1600 * * (1) For height without backrest: -530 (2) For free lift without backrest: +530 Weight for diesel model: +120kg(QD32) [Equipment] Adjustable ORS seat with belt Asbestos-free brake shoe materials Cylinder type bonnet latch with locking function Donaldson dry type cyclopac air-cleaner Drawbar device Durable overhead guard with resin screen Engine auto glow system (Diesel) Engine idle-up device(gasoline) Flow control valve Fuel water sedimenter (Diesel) Full hydrostatic power steering Full transistorized ignition (Gasoline) Hydraulic oil dipstick Interlock system 1) ITA class III carriage J-lug pneumatic industrial tires Lift circuit cut-off valve Load backrest Radiator coolant reservoir Return hydraulic filter Suction hydraulic strainer Tilt lock valve Transmission oil dipstick (power shift T/M) Transmission oil filter (power shift T/M) Wide view two stage mast(vm300) 1070 forks 2-spool control valve with pressure relief [Controls] Electric shift control lever (direction change) Lift and tilt levers Multi-function switch lever with self-cancelling mechanism (Lighting & turn-signal) Parking brake lever with inter-lock Tilt adjustable steering post Neutral safety mechanism [Accessories] Access-assisted hand grip Back-up buzzer Back-up lights Deluxe floor mat Detachle and portable glove box Electric horn Front combination lights (turn signal, clearance) Head lights - trafic purpose High-mounted rear combination lights Operator tool kit Pen/ Cup holder Side view mirrors [Instruments and Switch] Charge indicator Engine oil pressure warning indicator Fuel gauge Glow indicator (Diesel) Hourmeter Ignition key engine stop (Diesel) Neutral safety switch Fuel water sedimenter indicator (Diesel) Water temperature gauge Alternative fork lengths Alternative lengths fork extension sleeve Bale clamp (LG) Carton clamp(2-3t) (CLG) Crane arm (CA) Drum clamp(2-3t) (DLG) clamp(2-3t) (FLG) positioner hydraulic type(hook-on/ Integral )(FS) positioner manual type High, wide type load backrest Hinged forks/ scoop (HFS) Load push-pull(2-3t) (PPC) Load stabilizer(2-3t) (STA) Ram attachment (RA) Rotating forks (Hook-on/ Integral type) (RF) Rotating paper roll clamp (Hook-on/ Integral type )(PR) Side-shifter(Hook-on/ Integral ) (SS) Sleeve-in hook Wide type fork carriage Wide view full free 2-stage (VFM) mast Wide view full free 3-stage (VFHM) mast Wide view full free 2-stage 4cyl (VFW) mast(2-3t) Wide view full free 3-stage 4cyl (VFHW) mast(2-3t) 1) STD for EXE/EXN specification [Equipment] Auxiliary hydraulic valve modules(max. 5spool) Cabin - panel type(scbpa) Central greasing system (CL) Color tire (white, green) Dual element aircleaner( ADE ) Exhaust purify catalystic muffl er(epm)(diesel) Fingertip hydraulic valve control (FIT) Fishery industry package (FC)(2-3t) Front dual drive wheels( DD/ SDD ) Full open cabine(aw 061) Heater(HR) Heater & defroster (DEF) High capacity radiator - High power model(rad PF2) Interlock system 1) (SIL) Lift lock mechanism (VLL) Load sensing valve (VLS) LPG exclusive/ Dual fuel(lpg - Gasoline) package Non-slip differential(power shift T/M) Oil clutch(manual T/M) Overhead exhaust system(tue) Overhead guard/ High profi le Overhead guard/ Low profi le Plate fin type radiator(rad PF) Power clutch(manual T/M) Pre-cleaner engine air intake(cak B)(Gasoline) Radiator dust screen (fi ne, medium mesh) Smoke reduction/spark arrester muffl er (Diesel) Steel cabin - enclosed type(scb 001) Synchronised steering mechanism(srs) Unique cushion tires(se) Windshield wiper [Accessories] Custom paint-work Fire extinguisher(fe) Rear working light(rwl) Rotating warning light(rly/rlr) Tilt cylinder boots(tlb) [Instruments and Switch] Aeter (AM) O.K. monitor (fuel level, battery electrolyte level, coolant level, parking brake, air-cleaner, seat-belt) Speedometer (SM) Torque converter oil pressure gauge (TPM) Torque converter oil temperature gauge (power shift T/M) Others on request Rated capacity with (* ): Shows capacity with front dual tires. Lifting speed with VFM/VFHM mast: with VFM 390/s with load. 410/s without load. with VFHM 450/s with load. 470/s without load. Lowering speed with VFM/VFHM mast: 440/s with load. 380/s without load. Overall vehicle length with VFHM mast: +15 longer than of standard model with VM/VFM mast. Meets following major standards and code: ISO915-2 Counter Balanced Lift Trucks, Stability & Safety Test(Int'l) ISO 3691 Powered industrial trucks - safety code JIS D6001 Industrial Lift Trucks (Japan) ISO D6011 Stability & Safety Test (Japan) Overhead guard meets ISO 6055, JIS D6021 Specifications are subject to change without notice and its may vary depending on markets. Please consult your TCM representative for details

8 FD / FG20-25 FD / FG30 FHG20-25 FHG Frame Front axle Rear axle Counter weight GROUND CLEARANCE FD/FG35T3S STANDARD DIMENSIONS STANDARD DIMENSIONS FD / FG20 FD / FG25 FD / FG30 FHG20 FHG25 FHG30 FD/FG35T3S 1 Overall height, fork raised(with backrest) Maximum fork height height, fork lowered Backrest height Free lift thickness Ground clearance(front axle) /165 8 Overall length(with forks) Length to fork face length Load distance(centerline of front axle to front face of forks) Wheelbase Rear overhang Drawbar Pin Center Overhead guard clearance(from face of seat)** Overall height(overhead guard)** Overall width 18 spread(outside) Tread (front) Tread (rear) 21 width Inside turning radius Outside turning radius Minimum intersecting aisle / Tilt angles(forward-backward) FD / FG20 FD / FG25 FD / FG30 FHG20 FHG25 FHG30 **Oceania(EXC), European(EXE) and Scandinavian export trucks(exn): +60 DIMENSIONS WITH FRONT DUAL DRIVE WHEELS (option) FD/FG35T3S Tire size (front dual Type: DD) 4 x PR(I) 17 Overall width Tread (front) Inside turning radius 23 Outside turning radius Minimum intersecting aisle x 28 x PR(I) Tire size (front dual Type: SDD) 13 4 x PR(I) 4 x PR(I) 17 Overall width Tread (front) Inside turning radius 23 Outside turning radius Minimum intersecting aisle

9 UniCarriers Corporation retains the right to change these products and specifi cations without incurring any obligation relating to such changes. These products and specifi cations are subject to change without notice. Photos and illustrations may or may not include optional equipment and accessories. Features and specifi cations may vary depending on markets. Performance data and dimensions are nominal and subject to tolerances. Produced in ISO certified factory. UniCarriers Corporation Bellport E,6--7,Minami-Oi,Shinagawa-ku Tokyo ,Japan TEL: CATALOGUE No. FS16-2B0(C0)/E(SPEC) Printed in Japan SI