FD & FGE technical specifications

Transcription

1 FD & FGE technical specifications

2 STANDARD SPECIFICATIONS September 2013 CHARACTERISTICS WEIGHTS WHEELS & TIRES DIMENSIONS PERFORMANCE DRIVE OTHERS Counterbalance trucks Designation according VDI 3586 Manufacturers Data and Design Characteristics Data sheet for materials handling equipment 1.1 Manufacturer UniCarriers VDI 2198 Registration note 1.2 Model name FGE15-E1 FD15-E1 FGE18-E1 FD18-E1 Model variation P1D1A15LQ Y1D1A15Q P1D1A18LQ Y1D1A18Q 1.3 Power unit: Electric, Diesel, Gasoline, LPG, others LPG Diesel LPG Diesel 1.4 Operation: Sit, Hand, Pedestrian, Standing, Order picking Sit Sit Sit Sit 1.5 Load capacity Q (t) Load centre c (mm) Front overhang x (mm) Wheel base y (mm) Service weight kg Axle load with load, front/rear kg 3665/ / / / Axle load without load, front/rear kg 1210/ / / / Tyres front/rear (C=Cushion,SE=superelastic,P=pneumatic) P(SE)/P(SE) 3.2 Tyre size, front PR PR PR PR 3.3 Tyre size, rear PR PR PR PR 3.5 Wheels, number front/rear (x=powered) 2x/2 2x/2 2x/2 2x/2 3.6 Tread, front b10 (mm) Tread, rear b11 (mm) Tilt /carriage, forward/backward α/β ( ) 6/12 6/12 6/12 6/ Height mast fully lowered h 1 (mm) Free lift h 2 (mm) Lift height h 3 (mm) Height mast fully extended h 4 (mm) Overhead guard height h 6 (mm) Seat height/standing height h 7 (mm) Towing coupler height h 10 (mm) Overall length l 1 (mm) Length to fork face l 2 (mm) Overall width 1 b 1 (mm) Fork dimensions s,e,l (mm) 35x100x x100x x100x x100x Carriage DIN 15173, Class / Form A,B 2A 2A 2A 2A 4.24 Carriage width b 3 (mm) underclearance loaded m 1 (mm) Underclearance centre wheelbase m 2 (mm) Right angle stacking aisle with pallet 1000x1200 crossways Ast (mm) Right angle stacking aisle with pallet 800x1200 lengthways Ast (mm) Turning radius Wa (mm) Turning radius, inner b 13 (mm) Travelling speed with/without load km/h 18.5/ / / / Lifting speed with/without load mm/s 580/ / / / Lowering speed with/without load mm/s 520/ / / / Drawbar pull, with/without load kn 15.3/9.1 16/ /9.1 16/ Gradeability with/without load % 39/23 38/23 35/20 36/ Acceleration with/without load s 4.4/ / / / Service brake Hydraulic 7.1 Engine manufacturer/type K21 QD32 K21 QD Engine rated power according ISO 1585 kw Rated engine revolutions min Number of cylinders/displacement cm 3 4/2065 4/3153 4/2065 4/ Fuel consumption according VDI cycle (60 cycles/hour) l/h; kg/h Type of drive control Torque converter/1 8.2 Working pressure attachments bar Noise level operator s ear according EN12053 db(a) 77* * 1 79 * 1 ) Noise level at operator s ear in ECO-mode

3 DIMENSIONS MAST SPECIFICATIONS & RATED CAPACITIES: FD & FGE: 1.5 TONNE type WIDE VIEW WIDE VIEW name Maximum fork height Overall height Free lift Load capacity 2 Load center 500 mm Tilt angle Fully extended Forward/ Fully lowered backward 1.5 tonne mm 1 mm 1 mm 1 mm 1 mm 1 mm 1 degrees kg 2W / W / W / W / W / W / W / F / F / F / F / F / F / F / F / F / F / F / F /6 850* 3F /6 700* 3V / V / V / V / V / V / V /6 850* 3V /6 700* 1 ) 1 inch = 25.4 mm 1 kg = lb 2 ) With single pneumatic tyres unless indicated *) Load capacity with double tyres. Truck width:1480 mm

4 DIMENSIONS MAST SPECIFICATIONS & RATED CAPACITIES: FD & FGE: 1.8 TONNE type WIDE VIEW WIDE VIEW name Max. fork height Overall height Fully extended Free lift Tilt angle Forward/ backward Load capacity 2 Load center 500 mm Fully lowered 1.8 tonne mm 1 mm 1 mm 1 mm 1 mm 1 mm 1 degrees kg 2W / W / W / W / W / W / W / F / F / F / F / F / F / F / F / F / F / F / F /6 850* 3F /6 700* 3V / V / V / V / V / V / V /6 900* 3V /6 700* 1 ) 1 inch = 25.4 mm 1 kg = lb 2 ) With single pneumatic tyres unless indicated *) Load capacity with double tyres. Truck width: 1480 mm

5 STANDARD SPECIFICATIONS September 2013 Counterbalance trucks Designation according VDI 3586 Manufacturers Data and Design Characteristics Data sheet for materials handling equipment VDI 2198 Registration note 1.1 Manufacturer UniCarriers CHARACTERISTICS WEIGHTS WHEELS & TIRES DIMENSIONS PERFORMANCE 1.2 Model name FGE20-E1 FD20-E1 FGE25-E1 FD25-E1 FGE30-E1 FD30-E1 FGE32-E1 FD32-E1 Model variation U1D2A20LQ Y1D2A20Q U1D2A25LQ Y1D2A25Q UG1D2A30LQ YG1D2A30Q UG1D2A32LQ YG1D2A32Q 1.3 Power unit: Electric, Diesel, Gasoline, LPG, others LPG Diesel LPG Diesel LPG Diesel LPG Diesel 1.4 Operation: Sit, Hand, Pedestrian, Standing, Order picking Sit Sit Sit Sit Sit Sit Sit Sit 1.5 Load capacity Q (t) Load centre c (mm) Front overhang x (mm) Wheel base y (mm) Service weight kg Axle load with load, front/rear kg 4705/ / / / / / / / Axle load without load, front/rear kg 1550/ / / / / / / / Tyres front/rear (C=Cushion,SE=superelastic,P=pneumatic) P(SE)/P(SE) 3.2 Tyre size, front PR PR PR PR 28x PR 28x PR 28x PR 28x PR 3.3 Tyre size, rear PR PR PR PR PR PR PR PR 3.5 Wheels, number front/rear (x=powered) 2x/2 2x/2 2x/2 2x/2 2x/2 2x/2 2x/2 2x/2 3.6 Tread, front b10 (mm) Tread, rear b11 (mm) Tilt /carriage, forward/backward α/β ( ) 6/12 6/12 6/12 6/12 6/12 6/12 6/12 6/ Height mast fully lowered h 1 (mm) Free lift h 2 (mm) Lift height h 3 (mm) Height mast fully extended h 4 (mm) Overhead guard height h 6 (mm) Seat height/standing height h 7 (mm) Towing coupler height h 10 (mm) Overall length l 1 (mm) Length to fork face l 2 (mm) Overall width 1 b 1 (mm) Fork dimensions s,e,l (mm) 40x100x x100x x100x x100x x100x x100x x100x x100x Carriage DIN 15173, Class / Form A,B 2A 2A 2A 2A 3A 3A 3A 3A 4.24 Carriage width b 3 (mm) underclearance loaded m 1 (mm) Underclearance centre wheelbase m 2 (mm) Right angle stacking aisle with pallet 1000x1200 crossways Ast (mm) Right angle stacking aisle with pallet 800x1200 lengthways Ast (mm) Turning radius Wa (mm) Turning radius, inner b 13 (mm) Travelling speed with/without load km/h 19/19 18/18 19/19 18/18 19/ / / / Lifting speed with/without load mm/s 620/ / / / / / / / Lowering speed with/without load mm/s 500/ / / / / / / / Drawbar pull, with/without load kn 18.5/ / / / / / / / Gradeability with/without load % 34/26 29/26 29/22 24/22 23/23 21/23 22/21 20/ Acceleration with/without load s 4.3/ / / / / / / / Service brake Hydraulic 7.1 Engine manufacturer/type K25 QD32 K25 QD32 K25 QD32 K25 QD32 DRIVE 7.2 Engine rated power according ISO 1585 kw Rated engine revolutions min Number of cylinders/displacement cm 3 4/2488 4/3153 4/2488 4/3153 4/2488 4/3153 4/2488 4/3153 OTHERS 7.5 Fuel consumption according VDI cycle (60 cycles/hour) l/h; kg/h Type of drive control Torque converter/1 8.2 Working pressure attachments bar Noise level operator s ear according EN12053 db(a) 77 * * * * 1 78 * 1 ) Noise level at operator s ear in ECO-mode

6 DIMENSIONS MAST SPECIFICATIONS & RATED CAPACITIES: FD & FGE: TONNE type WIDE VIEW TWO STAGE FULL FREE WIDE VIEW name Maximum fork height Fully lowered Overall height Fully extended Free lift Tilt angle Forward/ backward Load capacity 2 Load center 500 mm 2.0 tonne 2.5 tonne mm 1 mm 1 mm 1 mm 1 mm 1 mm 1 degrees kg 1 kg 1 2W / W / W / W / W / W / W / F / F / F / F / F / F / F / F / F / F / F / F /6 1550* 1650* 3F /6 1200* 1300* 3V / V / V / V / V / V / V /6 1550* 1800* 3V /6 1250* 1350* 1) 1 inch = 25.4 mm 1 kg = lb 2) Capacity with single pneumatic tyres unless indicated *) Load capacity with Double tyres. Truck width 1595 mm

7 DIMENSIONS MAST SPECIFICATIONS & RATED CAPACITIES: FD & FGE: TONNE type name Maximum fork height Fully lowered Overall height Fully extended Free lift Tilt angle Forward/ backward Load capacity 2 Load center 500 mm 3.0 tonne 3.2 tonne WIDE VIEW TWO STAGE FULL FREE WIDE VIEW mm 1 mm 1 mm 1 mm 1 mm 1 mm 1 degrees kg 1 kg 1 2W / W / W / W / W / W / W / F / F / F / F / F / F / F / F / F / F / F / F /6 2200* 2350* 3F /6 1900* 1950* 3V / V / V / V / V / V / V /6 2200* 2400* 3V /6 1900* 2100* 1) 1 inch = 25.4 mm 1 kg = lb 2) Capacity with single pneumatic tyres unless special containers mast available: 2175 mm *) Load capacity with double tyres. Truck width: 1720 mm

8 TCM - A BRAND OF UNICARRIERS CORPORATION T-FD&FGE S.EN/TCM TCM Corporation reserves the right to make any changes without notice concerning colours, equipment or specifications detailed in this brochure, or to discontinue individual models. The colours of vehicles delivered may differ slightly from those in this brochure. The specifications vary for different countries depending on local market conditions. Please consult your local dealer to ensure that the vehicle delivered accords with your expectations. All values are determined based on the standard condition and may vary, due to motor and system tolerances, condition of the truck and operational conditions. Some equipment shown on photos are optional. tcm.eu