STANDARD EQUIPMENT MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment.

Transcription

1 STNR QUPMNT optional QUPMNT SO Standard cabin O ll-weather steel cab with 60 visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window(h) ockable door Hot & cool box Storage compartment & shtray Transparent cabin roof-cover Radio / US player Handsfree mobile phone system with US 12 volt power outlet (24V to 12V converter) Sun visor omputer aided power optimization (New PO) system -power mode, 2-work mode, user mode uto deceleration & one-touch deceleration system uto warm-up system uto overheat prevention system utomatic climate control ir conditioner & heater efroster Self-diagnostics system Starting id (air grid heater) for cold weather entralized monitoring display ngine speed or Trip meter/ccel. lock Gauges uel level gauge ngine coolant temperature gauge Hyd. oil temperature gauge Warnings heck engine ommunication error ow battery ir cleaner clogging ndicators Max Power uel warmer uto idle oor and cab locks, one key Two outside rearview mirrors Mechanical suspension seat with heater our front working lights lectric horn atteries (2 x 12V x 72 H) attery master switch Removable clean-out screen for cooler utomatic swing brake Removable reservoir tank uel pre-filter with fuel warmer oom holding system rm holding system Track shoes (500mm, 20 ) Track rail guard ccumulator for lowering work equipment lectric transducer ower frame under cover (Normal) abin Rops (SO ) ROPS (Roll Over Protective Structure) uel filler pump (5 /min) eacon lamp Safety lock valve for boom cylinder with overload warning device Safety lock valve for arm cylinder Single-acting piping kit (breaker, etc.) ouble-acting piping kit (clamshell, etc.) Quick coupler Travel alarm ooms 4. m, 14 1 rms 1.96 m, m, m, 9 abin OPS/OG (SO/S 10262) evel OPS (alling Object Protective Structure) OG (alling Object Guard) abin lights abin front window rain guard Track shoes Rubbber pad (500mm, 20 ) Triple grousers shoe (500mm, 20 ) Triple grousers shoe (600mm, 24 ) Triple grousers shoe (700mm, 28 ) Track pad (500mm, 20 ) ower frame under cover (dditional) ong crawler lower frame ozer blade Tool kit Rearview camera Hi-mate (Remote Management System) Seat ir suspension seat with heater * Standard and optional equipment may vary. ontact your Hyundai dealer for more information. The machine may vary according to nternational standards. * The photos may include attachments and optional equipment that are not available in your area. * Materials and specifications are subject to change without advance notice. * ll imperial measurements rounded off to the nearest pound or inch. With Tier 4 nterim ngine installed hyundai heavy industries MOVNG YOU URTHR PS ONTT Rev 0 *Photo may include optional equipment.

2

3 Pride at Work Hyundai Heavy ndustries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, more precision, versatile machine preferences, and proven quality. Take pride in your work with Hyundai! ngine Technology ow emission, complies Tier 4 nterim & U Stage regulation ow noise, meet U 2nd noise regulation Hydraulic System mprovements New patented hydraulic control for improved controllability / mproved control valve design for added efficiency and smoother operation / New auto boom and swing priority system for optimum speed / New auto power boost feature for additional power when needed / mproved arm-in and boom-down flow regeneration system for added speed and efficiency Pump ompartment ndustry-leading, powerful, reliable Kawasaki designed, variable volume in-line axial piston pumps New compact solenoid block equipped with 4 solenoid valves, 1 PPR valves, 1 check valve accumulator and pilot filter - controls 2 speed travel, power boost, boom priority, safety lock nhanced Operator ab Machine Walk-round mproved Visibility nlarged cab with improved visibility / See-through upper skylight for visibility and ventilation arger right-side glass, now one piece, for better right visibility Safety glass windows on all sides - less expensive than (polycarbonate) and won t scratch or fade loseable sunshade for operator convenience / Reduced front window seam for improved operator view mproved ab onstruction New steel tube construction for added operator safety, protection and durability New window open/close mechanism designed with cable and spring lift assist and single latch release mproved Suspension Seat / onsole ssembly rgonomic joysticks with auxiliary control buttons for attachment use. Now with new sleek styling Heated suspension (standard) or optional air ride suspension with heat New joystick consoles - now adjustable in by pushing the button ntegrated seat with consoles - reduce the operator fatigue dvanced 7 olor luster with Touch Screen New olor isplay with easy to read digital gauges for hydraulic oil temperature, water temperature, and fuel. Simplified design makes adjustment and diagnostics easier. lso, new enhanced features such as rear-view camera are integrated into monitor. power modes : (P) Power, (S) Standard, () conomy, 2 work modes : ig & ttachment, (U) User mode for operator preference nhanced self-diagnostic features with GPS download capability One pump flow or two pump flow for optional attachment is now selectable through the cluster / New anti-theft system with password capability oom speed and arm regeneration are selectable through the monitor. uto power boost is now available - selectable (on/off) through the monitor. Powerful air conditioning and heat with auto climate control, 20% more heat and air output than 7 series! RMS (Remote Management System) works through GPS/satellite technology to ultimately provide better customer service and support. *Photo may include optional equipment. Undercarriage Sealed track chain (urethane seals) / Standard track rail guard / omfortable bolt-on steps arge upper roller cut-outs for debris clean-out / Tapered side frames for debris clean-out / Greasetype track tensioner 2/

4 Precision nnovative hydraulic system technologies make the 9 series excavator fast, smooth and easy to control. omputer ided Power The engine horsepower and hydraulic horsepower together in unison through the advanced PO(omputer ided Power Optimization) system, flow for the job at hand. Operator can set their own preferences for boom or swing priority, power mode selection and optional work tools at the touch of a button. The PO system also provides complete self diagnostic features and digital gauges for important information like hydraulic oil temperature, water temperatures and fuel level. This system interfaces with multiple sensors placed throughout the hydraulic system as well as the electronically controlled engine to provide the optimum level of engine power and hydraulic flow. Power Mode Work Mode User Mode P (Power Max) mode maximizes machine speed and power for mass production. S (Standard) mode provides a reduced, fixed rpm for optimum performance and improved fuel economy. or maximum fuel savings and improved control, (conomy) mode provides precise flow and engine power based on load demand. Three unique power modes provide the operator with custom power, speed and fuel economy. The work mode allows the operator to select single flow attachments like a hydraulic breaker or bi-directional flow attachments like a crusher. low settings unique to each attachment can be programmed from within the cluster. Some jobs require more precise machine settings. Using the versatile U (User) mode, the operator can customize engine speed, pump output, idle speed and other machine settings for the job at hand. mproved Hydraulic System To achieve optimum precision, Hyundai redesigned the hydraulic system to provide the operator with super fine touch and improved controllability. mproved pump flow control reduces flow when controls are not being used to minimize fuel consumption. mproved spool valves in the control valve are engineered to provide more precise flow to each function with less effort. mproved hydraulic valves, precision-designed variable volume piston pumps, fine-touch pilot controls, and enhanced travel functions make any operator running a 9 series look like a smooth operator. Newly improved features include arm-in and boom-down flow regeneration, improved control valve technology and innovative auto boom and swing priority for optimal performance in any application. uto oom-swing Priority This smart function automatically and continuously looks the ideal hydraulic flow balance for the boom and swing motions of the machine. The advanced PO system monitors the hydraulic system and adjusts its settings to maximize performance and productivity. *Photo may include optional equipment. 4/5

5 Performance 9 series is designed for maximum performance to keep the operator working productively. Track Rail Guard & djusters urable track rail guards keep track links in place. Track adjustment is made easy with standard grease cylinder track adjusters and shock absorbing springs. Perkins 1204 ngine Tier 4 interim, four cylinder, 4 cycle, turbo-charged, charge air cooled Perkins 1204 engine provides maximum power, reliability, optimum fuel economy, and reduced emissions. lectronically controlled fuel injection and diagnostic capabilities add to the engines efficiency and serviceability. etter Performance Using P (iesel Particulate ilter) enables uncompromised, fuel economy and reduced cooling pack size, because the engine calibration does not solely need to be focussed on low paticulates. y using mainly passive regeneration and low back pressure aftertreatment designs fuel economy is not negatively impacted. ntegrated aftertreatment without operating impact The 1204 engines have fully transparent regeneration strategies and service free P, completely seamless to the operator. One solution for all regions rea mandating the use of P are increasing and european air quality directive will drive more non-attainment zones. ecause our products use Ps, our customers don't have to offer a retrofit P option to allow machines to operate in these territories. Structure Strength The 9 series cabin structure has been fitted with stronger but slimmer tubing for more safety and improved visibility. ow-stress, high strength steel is integrally welded to form a stronger, more durable upper and lower frame. Structural integrity was tested by way of M (inite lements Method) analysis and long-term durability tests. ROPS(Roll Over Protective Structure) cab can be equipped to enhance operator safety. xcellent Performance in onfined reas R125R-9's short (1,500mm) tail swing radius allows the operator work in confined areas like close to buildings on roadways, and in urban areas. This ompact radius design provides easy and efficient operation in any limited space work environment. Min. swing radius 2,40mm Rear-end swing radius 1,495mm *Photo *Photo may include may include optional optional equipment. equipment. 8/9 6/7

6 Preference Operating a 9 series is unique to every operator. Operators can fully customize their work environment and operating preferences to fit their individual needs. n 9 series cabin you can easily adjust the seat, console and Operator omfort armrest settings to best suit your comfort level. The seat integrated with console absorb console vibration by seat suspension and reduce operator s fatigue. Other preference settings that add to overall operator comfort include the fully automatic high capacity airconditioning system, transparent polycarbonate glass sun roof, large and easy to control sun visor, and the Radio / US player. Reduced Stress Work is stressful enough. Your work environment should be stress free. Hyundai's 9 series provides improved cab amenities, additional space and a comfortable seat to minimize stress to the operator. powerful climate control system provides the operator with optimum air temperature. n advanced audio system with US player, M/M stereo and MP capabilities, plus remotely located controls is perfect for listening to music favorites. Operators can even talk on the phone with the hands-free cell phone feature. lso, the newly designed remote control offers radio hands-free function. Smart Key System (Option) 9 series excavators provide smart key system as an option. This allows the operator to start the engine by the push of a starter button without inserting a key in the ignition. Monitor Tilt Range Operator - riendly luster The advanced new cluster with 7 inch wide color with Touch screen and toggle switch allows the operator to select his personal machine preferences. Power and work mode selection, self diagnostics, optional rear-view camera, maintenance check lists, start-up machine security, and video functions were integrated into the cluster to make the machine more versatile and the operator more productive. The newly applied M transmitter application transmits signal to US & Radio player with the same frequency as cluster. The player outputs the audio through the internal speaker in the cab. The video & firmware updates are possible with US host support and an adjustable cluster hinge bracket improves cluster visibility. Horizontal Total : 150 o *Photo may include optional equipment. Wide abin with xcellent Visibility The newly designed cabin was conceived for more space, a wider field of view and operator comfort. Special attention was given to a clear, open and convenient interior with plenty of visibility on the machine surroundings and the job at hand. This well balanced combination of precision aspects put the operator in the perfect position to work safely and securely. Vertical Total : 0 o 8/9

7 Profitability 9 series is designed to maximize profitability through improved efficiencies, enhanced service features and longer life components. uel fficiency 9 series excavators are engineered to be extremely fuel efficient. New innovations like fan clutch, the variable speed remote fan, threestage auto decel system and the new economy mode help to conserve fuel and reduce the impact on the environment. Hi-mate (Remote Management System) Hi-mate, Hyundai's proprietary remote management system, provides operators and dealer service personnel access to vital service and diagnostic information on the machine from any computer with internet access. Users can pinpoint machine location using digital mapping and set machine work boundaries, reducing the need for multiple service calls. Hi-mate saves time and money for the owner and dealer by promoting preventative maintenance and reducing machine downtime. asy ccess -line access to filters, lube fittings, fuses, machine computer components and wide open compartments makes service more convenient on the 9 series. ong-ife omponents 9 series excavators were designed with bushings designed for long-life lube intervals (250 hrs) & polymer shims (wear resistant, noise reducing), long-life hydraulic filters (1,000hrs), long-life hydraulic oil (5,000hrs), more efficient cooling systems and integrated preheating systems which extend service intervals, minimize operating costs and reduce machine down time. *Photo may include optional equipment. 10/11

8 Specifications ngine Model Type Rated flywheel horse power S N Max. torque ore X stroke Piston displacement atteries Starting motor lternator Main pump Type Rated flow Sub-pump for pilot circuit 1995 (gross) 149 (net) 6271/1 (gross) 6271/1 (net) Hydraulic system ross-sensing and fuel saving pump system. Hydraulic motors Travel Swing Relief valve setting mplement circuits Travel Power boost (boom, arm, bucket) Swing circuit Pilot circuit Service valve Hydraulic cylinders No. of cylinder bore X stroke rives & rakes rive method rive motor Reduction system Max. drawbar pull Max. travel speed(high) / (low) Gradeability Parking brake ontrol Perkins 1204 Water cooled, 4 cycle iesel, 4-cylinders in line, direct injection, turbocharged charger and air cooled 124 HP (92.7 kw) / 1,950 rpm 116 HP (87 kw) / 1,950 rpm 126 PS (92.7 kw) / 1,950 rpm 118 PS (87 kw) / 1,950 rpm 54.0 f.m(91 f.ft)/ 1,400 rpm 105 x 127 mm (4.1 x 5.0 ) 4,400cc (268.5 in ) 2 X 12V X 100H 24V- 4.5kW 24V- 85mp Variable displacement tandem axis piston pumps 2 X 12.5 /min (2.6 US gpm / 27.2 UK gpm) Gear pump Two speed axial pistons motor with brake valve and parking brake xial piston motor with automatic brake 50 f/cm 2 (4,980 psi) 50 f/cm 2 (4,980 psi) 80 f/cm 2 (5,410 psi) 285 f/cm 2 (4,050 psi) 40 f/cm 2 (570 psi) nstalled oom: X 1,105 mm (4.1 X 4.5 ) rm: X 1,18 mm (4.5 X 44.8 ) ucket: X 840 mm (.9 X.1 ) lade: X 250 mm (.9 X 9.8 ) 2 pcs oom 1st: X 995 mm (4.1 X 9.2 ) 2nd: X 61 mm (5.7 X 24.1 ) ully hydrostatic type xial piston motor, in-shoe design Planetary reduction gear 1,00 f (29,21 f) 5.5 km/hr (.4 mph) /. km/hr (2.1 mph) 5 0 (70 %) Multi wet disc Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation. Swing system Swing motor Swing reduction Swing bearing lubrication Swing brake Swing speed oolant & ubricant capacity Refilling uel tank ngine coolant ngine oil Swing device-gear oil inal drive(each)-gear oil Hydraulic system(including tank) Hydraulic tank Undercarriage Operating weight Shoes Type 500 (20 ) Triple grouser 600 (24 ) 700 (28 ) R125R-9 R125R-9 (ozer type) R125R-9 R125R-9 (ozer type) R125R-9 R125R-9 (ozer type) R125R-9 R125R-9 (ozer type) R125R-9 R125R-9 (ozer type) R125R-9 R125R-9 (ozer type) ixed displacement axial piston motor Planetary gear reduction Grease-bathed Multi wet disc 12.6 rpm liter US gal Operating weight () 12,50(27,20) 1,050(28,770) 12,500(27,560) 1,200(29,100) 12,500(17,560) 1,200(29,100) 12,650(27,890) 1,50(29,40) 12,650(27,890) 1,50(29,40) 12,800(28,220) 1,500(29,760 ) UK gal The X-leg type center frame is integrally welded with reinforced box-section track frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock absorbing springs and sprockets, and a track chain with double or triple grouser shoes. enter frame Track frame No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side X - leg type Pentagonal box type Operating weight (approximate) Operating weight, including 4,00mm (14 1 ) boom, mm arm, S heaped 0.40m (0.52 yd ) bucket, lubricant, coolant, full fuel tank, full hydraulic tank, and all standard equipments. Major component weight Upperstructure 4.m (14 1 )mono boom(with arm cylinder) Width mm(in) R125R-9 41 R125R-9 6,950 (15,20 ) 950 (2,090 ) 4 pressure f/cm (psi) (6.24) 0.46(6.54) 0.42(5.91) 0.44(6.24) 0.7(5.26) 0.9(5.55) 0.5(4.98) 0.7(5.26) 0.2(4.55) 0.4(4.8) 0.0(4.27) 0.2(4.55) uckets ll buckets are welded with high-strength steel. S heaped m (yd ) S heaped 0.0 (0.9) 0.40 (0.52) 0.45 (0.59) 0.50 (0.65) 0.59 (0.77) oom rm ucket digging force rm crowd force apacity m (yd ) heaped 0.27(0.5) 0.44(0.58) 0.40(0.52) 0.45(0.59) 0.52(0.68) attachment ength Weight ength Weight S SO S SO 0.0 (0.9) 0.40 (0.52) 0.45 (0.59) 0.50 (0.65) 0.59 (0.77) Without sidecutters 610(24.0) 760(29.9) 80(2.7) 900(5.4) 1,020(40.2) () () kn f f kn f f kn f f kn f f Width mm (in) With sidecutters 720(28.) 870(4.) 940(7.0) 1,010(9.8) 1,10(44.5) Note: oom weight includes arm cylinder, piping, and pin rm weight includes bucket cylinder, linkage, and pin Weight () 60(790) 410(900) 40(950) 450(990) 490(1,080) 20 (710) 78.5[85.6] 8,000[8,70] 17,640[19,240] 90.2[98.4] 9,200[10,040] 20,280[22,120] 60.2[65.7] 6,140[6,700] 1,540[14,770] 62.9[68.6] 6,410[6,990] 14,10[15,410] 4,00 (14 1 ) 950 (2,090) 40 (750) 78.5[85.6] 8,000[8,70] 17,640[19,240] 90.2[98.4] 9,200[10,040] 20,280[22,120] 55.7[60.8] 5,680[6,200] 12,520[1,660] 58.1[6.] 5,920[6,460] 1,050[14,240] Recommendation 4,00 (14 1 ) oom rm rm (9 ) rm (9 ) 400 (880) 78.5[85.6] 8,000[8,70] 17,640[19,240] 90.2[98.4] 9,200[10,040] 20,280[22,120] 48.1[52.4] 4,900[5,50] 10,800[11,780] 49.7[54.2] 5,070[5,50] 11,180[12,200] - : pplicable for materials with density of 2,000 /m (,70 / yd ) or less : pplicable for materials with density of 1,600 /m (2,700 / yd ) or less : pplicable for materials with density of 1,100 /m (1,850 / yd ) or less ooms and arms are welded, a low-stress, full-box section design. 4.m(14 1 ) boom and 1.96m, 2.26m, 2.81m(9 )arms are available. igging force Remarks [ ]: Power oost Pilot control Traveling and steering ngine throttle Two joysticks with one safety lever (H): Swing and arm, (RH): oom and bucket(so) Two levers with pedals lectric, ial type 12/1

9 imensions & Working Range imensions & Working Range R125R-9 imensions R125R-9 imensions,',' G G H H K K Tumbler distance 2,610 (8' 6") Overall length of crawler,40 (11' 0") clearance of counterweight Rear-end length Overall width of upperstructure 2,490 (8 2 ) Overall of cab 2,900 (9 6 ) G Min. ground clearance 1,990 (6 6 ) Overall length 6,760 (22 2 ) 6,780 (22 ) 6,720 (22 1 ) Tail swing radius Overall of boom 2,50 (8 ) 2,740 (9 0 ),070 (10 1 ) Rear-end length Overall width of upperstructure 2,490 (8 2 ) Overall of cab 2,900 (9 6 ) K Track shoe width Overall width 500 (20 ) 600 (24 ) 700 (28 ) 2,500 (8 2 ) 2,600 (8 6 ) 2,700 (8 10 ) rm length ' ',680 (12' 1") (9 ) reach reach on ground depth depth (8' level) Max. vertical wall digging depth Max. dumping Min. swing radius clearance of counterweight rm length (9 ) Overall length 6,840 (22 5 ) 6,860 (22 6 ) 6,800 (22 ) Overall of boom 2,50 (8 ) 2,740 (9 0 ),010 (10 1 ) K Track shoe width 500 (20 ) 600 (24 ) 700 (28 ) 2,500 (8 2 ) 2,600 (8 6 ) 2,700 (8 10 ) 440 (1 5 ) H Track gauge 1,990 (6 6 ) 4,00 (14 1 ) oom length 890 (2 10 ) G Min. ground clearance Overall width R125R-9 Working range 4,00 (14 1 ) oom length Overall length of crawler R125R-9 Working range 2,780 (9' 2") 440 (1 5 ) H Track gauge Tumbler distance rm length 890 ( 10 ) Tail swing radius 4,00 (14 1 ) oom length 4,00 (14 1 ) oom length (9 ) 7,420 (24 4 ) 7,700 (25 ) 8,20 (27 0 ) 7,270 (2 10 ) 7,560 (24 10 ) 8,090 (26 6 ) 4,760 (15 7 ) 5,060 (16 7 ) 5,610 (14 0 ) 4,500 (14 9 ) 4,80 (15 10 ) 5,420 (17 8 ) 4,140 (1 7 ) 4,410 (14 6 ) 4,970 (16 ) 7,910 (25 11 ) 8,100 (26 7 ) 8,480 (27 9 ) 5,550 (18 ) 5,740 (18 10 ) 6,120 (20 1 ) 2,280 (7 6 ) 2,40 (7 8 ) 2,460 (8 1 ) rm length ' ' reach reach on ground depth depth (8' level) Max. vertical wall digging depth Max. dumping Min. swing radius (9 ) 7,420 (24 4 ) 7,700 (25 ) 8,20 (27 0 ) 7,270 (2 10 ) 7,560 (24 10 ) 8,090 (26 6 ) 4,760 (15 7 ) 5,060 (16 7 ) 5,610 (14 0 ) 4,500 (14 9 ) 4,80 (15 10 ) 5,420 (17 8 ) 4,140 (1 7 ) 4,410 (14 6 ) 4,970 (16 ) 7,910 (25 11 ) 8,100 (26 7 ) 8,480 (27 9 ) 5,550 (18 ) 5,740 (18 10 ) 6,120 (20 1 ) 2,280 (7 6 ) 2,40 (7 8 ) 2,460 (8 1 ) 14/15

10 imensions & Working Range imensions & Working Range R125R-9 (ozer type) imensions R125R-9 (ozer type) imensions O M O M G N H K K G N H,',' Tumbler distance 2,610 (8' 6") Overall length of crawler,40 (11' 0") clearance of counterweight Rear-end length Overall width of upperstructure 2,490 (8 2 ) Overall of cab 2,900 (9 6 ) G Min. ground clearance 1,990 (6 6 ) 2,780 (9' 2") Overall length of crawler,678 (12' 1") (9 ) Overall length 7,560 (24 8 ) 7,580 (24 9 ) 7,520 (24 7 ) Tail swing radius Overall of boom 2,50 (8 ) 2,740 (9 0 ),070 (10 1 ) Rear-end length Overall width of upperstructure 2,490 (8 2 ) Overall of cab 2,900 (9 6 ) K Track shoe width 440 (1 5 ) H Track gauge Tumbler distance rm length 890 (2 10 ) Tail swing radius 4,00 (14 1 ) oom length Overall width 500 (20 ) 600 (24 ) 700 (28 ) 2,500 (8 2 ) 2,600 (8 6 ) 2,700 (8 10 ) clearance of counterweight H Track gauge 1,990 (6 6 ) 540 (1 8 ) M clearance of blade up 540 (1 8 ) N epth of blade down 50 (1 8 ) N epth of blade down 50 (1 8 ) O Height of blade 580 (1 9 ) O Height of blade 580 (1 9 ) rm length ' ' reach reach on ground depth depth (8' level) Max. vertical wall digging depth Max. dumping Min. swing radius (9 ) Overall length 7,560 (24 8 ) 7,580 (24 9 ) 7,520 (24 7 ) Overall of boom 2,50 (8 ) 2,740 (9 0 ),070 (10 1 ) K Track shoe width 500 (20 ) 600 (24 ) 700 (28 ) 2,500 (8 2 ) 2,600 (8 6 ) 2,700 (8 10 ) Overall width R125R-9 (ozer type) Working range 4,00 (14 1 ) oom length 440 (1 5 ) M clearance of blade up R125R-9 (ozer type) Working range rm length 890 (2 10 ) G Min. ground clearance 4,00 (14 1 ) oom length 4,00 (14 1 ) oom length (9 ) 7,420 (24 4 ) 7,700 (25 ) 8,20 (27 0 ) 7,270 (2 10 ) 7,560 (24 10 ) 8,090 (26 6 ) 4,760 (15 7 ) 5,060 (16 7 ) 5,610 (18 4 ) 4,500 (14 9 ) 4,80 (15 10 ) 5,420 (17 8 ) 4,140 (1 7 ) 4,410 (14 6 ) 4,970 (16 ) 7,910 (25 11 ) 8,100 (26 7 ) 8,480 (27 9 ) 5,550 (18 ) 5,740 (18 10 ) 6,120 (20 1 ) 2,280 (7 6 ) 2,40 (7 8 ) 2,460 (8 1 ) rm length ' ' reach reach on ground depth depth (8' level) Max. vertical wall digging depth Max. dumping Min. swing radius (9 ) 7,420 (24 4 ) 7,700 (25 ) 8,20 (27 0 ) 7,270 (2 10 ) 7,560 (24 10 ) 8,090 (26 6 ) 4,760 (15 7 ) 5,060 (16 7 ) 5,610 (18 4 ) 4,500 (14 9 ) 4,80 (15 10 ) 5,420 (17 8 ) 4,140 (1 7 ) 4,410 (14 6 ) 4,970 (16 ) 7,910 (25 11 ) 8,100 (26 7 ) 8,480 (27 9 ) 5,550 (18 ) 5,740 (18 10 ) 6,120 (20 1 ) 2,280 (7 6 ) 2,40 (7 8 ) 2,460 (8 1 ) 16/17

11 ifting apacity ifting apacity R125R-9 Rating over-front Rating over-side or 60 degree oom : 4. m (14 1 ) / rm : 2.26 m / ucket : 0.40 m S heaped / Shoe : 500mm(20 ) triple grouser t max. reach.0 m apacity.0m m *4670 *1000 *5790 *12760 *5970 *1160 *560 * *200 *2980 * * *1480 *260 *2090 * *1770 * *2290 * (19.6) 6.90 (22.6) 7.4 (24.1) 7.41 (24.) 7.1 (2.4) 6.42 (21.1) 5.08 (16.7) R125R-9 Rating over-front Rating over-side or 60 degree oom : 4. m (14 1 ) / rm : 2.26 m / ucket : 0.40 m S heaped / Shoe : 500mm(20 ) triple grouser t max. reach.0 m apacity.0m m *4670 *1000 *5790 *12760 *5970 *1160 *560 *11820 *4670 * *200 *2980 *6570 *560 *7850 *770 *810 *40 *7560 *200 * *1480 *260 *2090 *4610 *270 *5220 *260 *5800 *2660 *5860 *1480 * *1770 *900 *1850 *4080 *1940 *4280 *2060 *4540 *2180 *4810 *200 *2290 *5050 *1770 * (19.6) 6.90 (22.6) 7.4 (24.1) 7.41 (24.) 7.1 (2.4) 6.42 (21.1) 5.08 (16.7) oom : 4. m (14 1 ) / rm : 1.96 m / ucket : 0.40 m S heaped / Shoe : 500mm(20 ) triple grouser t max. reach.0 m apacity.0m m *1650 *1650 *270 *500 *11090 *5940 *1100 *1050 *5210 *11290 * *2500 *5510 *160 * *1900 * (18.4) 6.59 (21.6) 7.06 (2.2) 7.1 (2.4) 6.8 (22.4) 6.08 (19.9) oom : 4. m (14 1 ) / rm : 1.96 m / ucket : 0.40 m S heaped / Shoe : 500mm(20 ) triple grouser t max. reach.0 m apacity.0m m *1650 *1650 *270 *500 *11090 *5940 *1100 *1050 *5210 *11290 * *2500 *5510 *160 *6970 *660 *8070 *790 *860 *240 *7140 *2500 * *220 *4920 *2480 *5470 *2690 * *1900 *4190 *1970 *440 *2070 *4560 *2190 *480 *220 *5110 *2420 *540 *1900 *4190 *1450 *200 *120 *2710 *1160 *2560 *120 *2710 *1510 * (18.4) 6.59 (21.6) 7.06 (2.2) 7.1 (2.4) 6.8 (22.4) 6.08 (19.9) oom : 4. m (14 1 ) / rm : 2.81 m (9 2 ) / ucket : 0.40 m S heaped / Shoe : 500mm(20 ) triple grouser t max. reach.0 m apacity.0m m - (-15 ft) *40 *760 *780 *40 *760 *780 *960 * *11950 *1050 *5640 *1240 *4290 *9460 *960 * ifting capacity is based on S 1097, SO ifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. *2640 * *1620 *570 *1810 * *1550 * (21.8) 7.47 (24.5) 7.88 (25.9) 7.95 (26.1) 7.68 (25.2) 7.04 (2.1) 5.88 (19.) oom : 4. m (14 1 ) / rm : 2.81 m (9 2 ) / ucket : 0.40 m S heaped / Shoe : 500mm(20 ) triple grouser t max. reach.0 m apacity.0m m - (-15 ft) *40 *760 *780 *40 *760 *780 *960 * *11950 *1050 *5640 *1240 *4290 *9460 *960 * *4290 * ifting capacity is based on S 1097, SO ifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. *2640 *5820 *20 *720 *680 *8110 *590 * *1620 *570 *1810 *990 * *2460 *5420 *260 *5800 *1620 * *1550 *420 *160 *590 *1720 *790 *1950 *400 *2070 *4560 *2150 * (21.8) 7.47 (24.5) 7.88 (25.9) 7.95 (26.1) 7.68 (25.2) 7.04 (2.1) 5.88 (19.) 18/19

12 ifting apacity ifting apacity R125R-9 Rating over-front Rating over-side or 60 degree oom : 4. m (14 1 ) / rm : 2.26 m / ucket : 0.40 m S heaped / Shoe : 500mm(20 ) triple grouser t max. reach.0 m apacity.0m m *4670 *1000 *5790 *12760 *5970 *1160 *560 * *200 *2980 * * *1480 *260 *2090 * *1770 * *2290 * (19.6) 6.90 (22.6) 7.4 (24.1) 7.41 (24.) 7.1 (2.4) 6.42 (21.1) 5.08 (16.7) R125R-9 Rating over-front Rating over-side or 60 degree oom : 4. m (14 1 ) / rm : 2.26 m / ucket : 0.40 m S heaped / Shoe : 500mm(20 ) triple grouser t max. reach.0 m apacity.0m m *4670 *1000 *5790 *12760 *5970 *1160 *560 *11820 *4670 * *200 *2980 *6570 *560 *7850 *770 *810 *40 *7560 * *1480 *260 *2090 *4610 *270 *5220 *260 *5800 *2660 *5860 *1480 * *1770 *900 *1850 *4080 *1940 *4280 *2060 *4540 *2180 *4810 *200 *2290 *5050 *1770 * (19.6) 6.90 (22.6) 7.4 (24.1) 7.41 (24.) 7.1 (2.4) 6.42 (21.1) 5.08 (16.7) oom : 4. m (14 1 ) / rm : 1.96 m / ucket : 0.40 m S heaped / Shoe : 500mm(20 ) triple grouser t max. reach.0 m apacity.0m m *1650 *1650 *270 *500 *11090 *5940 *1100 *1050 *5210 *11290 * *2500 *5510 *160 * *1900 * (18.4) 6.59 (21.6) 7.06 (2.2) 7.1 (2.4) 6.8 (22.4) 6.08 (19.9) oom : 4. m (14 1 ) / rm : 1.96 m / ucket : 0.40 m S heaped / Shoe : 500mm(20 ) triple grouser t max. reach.0 m apacity.0m m *1650 *1650 *270 *500 *11090 *5940 *1100 *1050 *5210 *11290 * *2500 *5510 *160 *6970 *660 *8070 *790 *860 *240 *7140 *2500 * *220 *4920 *2480 *5470 *2690 * *1900 *4190 *1970 *440 *2070 *4560 *2190 *480 *220 *5110 *2420 *540 *1900 * (18.4) 6.59 (21.6) 7.06 (2.2) 7.1 (2.4) 6.8 (22.4) 6.08 (19.9) oom : 4. m (14 1 ) / rm : 2.81 m (9 2 ) / ucket : 0.40 m S heaped / Shoe : 500mm(20 ) triple grouser t max. reach.0 m apacity.0m m - (-15 ft) *40 *760 *780 *40 *760 *780 *960 * *11950 *1050 *5640 *1240 *4290 *9460 *960 * ifting capacity is based on S 1097, SO ifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. *2640 * *1620 *570 *1810 * *1550 * (21.8) 7.47 (24.5) 7.88 (25.9) 7.95 (26.1) 7.68 (25.2) 7.04 (2.1) 5.88 (19.) oom : 4. m (14 1 ) / rm : 2.81 m (9 2 ) / ucket : 0.40 m S heaped / Shoe : 500mm(20 ) triple grouser t max. reach.0 m apacity.0m m - (-15 ft) *40 *760 *780 *40 *760 *780 *960 * *11950 *1050 *5640 *1240 *4290 *9460 *960 * *4290 * ifting capacity is based on S 1097, SO ifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. *2640 *5820 *20 *720 *680 *8110 *590 *7910 *2640 * *1620 *570 *1810 *990 * *2460 *5420 *260 *5800 *1620 * *1550 *420 *160 *590 *1720 *790 *1950 *400 *2070 *4560 *2150 * (21.8) 7.47 (24.5) 7.88 (25.9) 7.95 (26.1) 7.68 (25.2) 7.04 (2.1) 5.88 (19.) 20/21