SPI JP69 SAS827B C A R48 C53 TP1 TP3 TP2 REV 1.01 D65 R67 C39 JF4 50 C48 C42 F19 F20 F21 F22 F23 TP5 MB-D C114 C115 C201 + C3 C116 F24 F25 F26 F35

Transcription

1 Rev..0 SS-7B Backplane USER'S GUIDE BZ TP TP TP3 TP J JP36 JP3 JPI U37 U U3 U3 JPW3 JPW JPW 3 JF JF JF JF F3 F F F6 RT6 JP 3 JP30 3 JP JP JP7 JP6 JF JF6 U3 DESIGNED IN US F9 F0 F F F3 F F F6 F7 F F9 F30 F3 F3 F33 F3 F3 F36 F3 F0 F F F7 F7 F F D D R06 R03 R0 R69 R6 R6 R R3 R R R3 R33 R3 R3 R9 R R R R6 R7 R7 R6 R R R R R67 R R R R3 R R0 R06 R07 R R R R3 R R R6 D79 D7 D76 D7 D73 D7 D70 D69 D67 D66 D6 D63 D6 D6 D60 D9 D D7 D6 D JP69 BR ODE JF6-D JF-B MB- MB-D MB- MB-B JP36: OPEN:DEFULT LOSE:NY POWER BUTTON JP3: OPEN:DEFULT LOSE:LED TEST TO PS SPI DEBUG JP30: OPEN: -3: DEFULT -:0 FN FN3 FN FN JP -3:TEST -:BUZZER ENBLE OPEN:BUZZER DISBLE BUZZER RESET REV.0 SS7B SUPER

2 SS-7B Backplane User s Guide The information in this User s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at Super Micro omputer, Inc. ("Supermicro") reserves the right to make changes to the product described in this manual at any time and without notice. This product, including software, if any, and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any medium or machine without prior written consent. IN NO EVENT WILL SUPERMIRO BE LIBLE FOR DIRET, INDIRET, SPEIL, INIDENTL, SPEULTIVE OR ONSEQUENTIL DMGES RISING FROM THE USE OR INBILITY TO USE THIS PRODUT OR DOUMENTTION, EVEN IF DVISED OF THE POSSIBILITY OF SUH DMGES. IN PRTIULR, SUPERMIRO SHLL NOT HVE LIBILITY FOR NY HRDWRE, SOFTWRE, OR DT STORED OR USED WITH THE PRODUT, INLUDING THE OSTS OF REPIRING, REPLING, INTEGRTING, INSTLLING OR REOVERING SUH HRDWRE, SOFTWRE, OR DT. ny disputes arising between manufacturer and customer shall be governed by the laws of Santa lara ounty in the State of alifornia, US. The State of alifornia, ounty of Santa lara shall be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all claims will not exceed the price paid for the hardware product. alifornia Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only to products containing R (Manganese Dioxide) Lithium coin cells. Perchlorate Material-special handling may apply. See WRNING: Handling of lead solder materials used in this product may expose you to lead, a chemical known to the State of alifornia to cause birth defects and other reproductive harm. Manual Revision.0 Release Date: pril 0, 009 Unless you request and receive written permission from Super Micro omputer, Inc., you may not copy any part of this document. Information in this document is subject to change without notice. Other products and companies referred to herein are trademarks or registered trademarks of their respective companies or mark holders. opyright 009 by Super Micro omputer, Inc. ll rights reserved. Printed in the United States of merica ii

3 Preface Table of ontents ontacting Supermicro...iv Returning Merchandise for Service...v hapter SS-7B Safety Guidelines - ESD Safety Guidelines General Safety Guidelines n Important Note to Users Introduction to the SS-7B Backplane... - hapter Jumpers and Pin Definitions - Front onnectors... - Front onnectors Front Jumpers and Pin Definitions... - Explanation of Jumpers Front LED Indicator... - Front Panel LED Rear onnectors and LED Indicators SS Ports iii

4 SS-7B Backplane User s Guide ontacting Supermicro Headquarters ddress: Super Micro omputer, Inc. 90 Rock ve. San Jose, 93 U.S.. Tel: (0) Fax: (0) marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: Europe ddress: Super Micro omputer B.V. Het Sterrenbeeld, ML 's-hertogenbosch, The Netherlands Tel: 3 (0) Fax: 3 (0) sales@supermicro.nl (General Information) support@supermicro.nl (Technical Support) rma@supermicro.nl (ustomer Support) sia-pacific ddress: Super Micro omputer, Inc. F, No. 3-, Liancheng Rd. hung-ho 3, Taipei ounty Taiwan, R.O.. Tel: 6-() Fax: 6-() Web Site: Technical Support: support@supermicro.com.tw Tel: iv

5 Preface Returning Merchandise for Service receipt or copy of your invoice marked with the date of purchase is required before any warranty service will be rendered. You can obtain service by calling your vendor for a Returned Merchandise uthorization (RM) number. When returning to the manufacturer, the RM number should be prominently displayed on the outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and handling charges will be applied for all orders that must be mailed when service is complete. For faster service, RM authorizations may be requested online ( Whenever possible, repack the backplane in the original Supermicro box, using the original packaging materials. If these are no longer available, be sure to pack the backplane in an anti-static bag and inside the box. Make sure that there is enough packaging material surrounding the backplane so that it does not become damaged during shipping. This warranty only covers normal consumer use and does not cover damages incurred in shipping or from failure due to the alteration, misuse, abuse or improper maintenance of products. During the warranty period, contact your distributor first for any product problems. v

6 SS-7B Backplane User s Guide Notes vi

7 hapter : Safety Guidelines hapter SS-7B Safety Guidelines To avoid personal injury and property damage, carefully follow all the safety steps listed below when accessing your system or handling the components. - ESD Safety Guidelines Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent damage to your system, it is important to handle it very carefully. The following measures are generally sufficient to protect your equipment from ESD. Use a grounded wrist strap designed to prevent static discharge. Touch a grounded metal object before removing a component from the antistatic bag. Handle the backplane by its edges only; do not touch its components, peripheral chips, memory modules or gold contacts. When handling chips or modules, avoid touching their pins. Put the card and peripherals back into their antistatic bags when not in use. - General Safety Guidelines lways disconnect power cables before installing or removing any components from the computer, including the SS-7B backplane. Disconnect the power cable before installing or removing any cables from the SS-7B backplane. Make sure that the SS-7B backplane is securely and properly installed on the motherboard to prevent damage to the system due to power shortage. -

8 SS-7B Backplane User's Guide -3 n Important Note to Users ll images and layouts shown in this user's guide are based upon the latest PB Revision available at the time of publishing. The card you have received may or may not look exactly the same as the graphics shown in this manual. - Introduction to the SS-7B Backplane The SS-7B backplane has been designed to utilize the most up-to-date technology available, providing your system with reliable, high-quality performance. This manual reflects SS-7B Revision.0, the most current release available at the time of publication. lways refer to the Supermicro Web site at com for the latest updates, compatible parts and supported configurations. -

9 BZ D79 D JF6 JP7 7 D7 D73 JF6-D 03 FN 69 U F6 R R U3 R6 R7 R JP30: OPEN: -:0-3: JP30 3 R R07 R R06 R0 U3 67 DEFULT R6 R RT6 R R3 R3 R33 9 F F R 96 F0 D 93 F F7 3 JP BUZZER RESET 9 F9 FN3 6 JP OPEN:BUZZER DISBLE -:BUZZER ENBLE -3:TEST F R 9 JP R 6 R3 97 R 69 6 R D76 D70 D D67 D66 D7 6 6 F3 7 F F F6 3 7 MB-D MB- JPW JP69 R SPI 3 F36 R0 R03 3 F9 F0 F F F3 F3 0 F7 R67 J TP TP3 TP R DEBUG R3 R69 D 6 9 R6 R6 TP JPI TO PS 6 D D6 D9 D REV.0 DESIGNED IN US F R 67 JP36: OPEN:DEFULT LOSE:NY POWER BUTTON R3 JP JP36 FN JP3 JP3: OPEN:DEFULT LOSE:LED TEST U37 U3 R9 9 D6 7 7 D6 D60 9 D7 D6 D F3 66 JP R FN R3 R7 R6 JPW3 JF JF-B JPW R F3 F3 F33 F3 F7 F F9 F30 MB-B R R R06 MB- JF JF hapter : Safety Guidelines hapter Jumpers and Pin Definitions - Front onnectors 7 6 BR ODE 0 3 JF 3 0 JF3 0 SS7B Figure -: Front onnectors 3 9 Front onnectors. Main Power onnector: JPW. Power Supply onnector: JPI Secondary Power onnector: JPW Secondary Power onnector: JPW3 hassis Fan onnector: Fan JP hassis Fan onnector: Fan JP hassis Fan onnector: Fan3 JP6 9. MB- hot plug connector: JF 0. MB-B hot plug connector: JF. MB- hot plug connector: JF3. MB-D hot plug connector: JF 3. Backplane to front panel connector: JF. Backplane to front pannel connector: JF6 7. hassis Fan onnector Fan JP7 -

10 BZ D79 D JF6 JP7 7 D7 D73 JF6-D 03 FN 69 U F6 R R U3 R6 R07 R R06 R0 U3 R7 R R JP30: OPEN: -:0 DEFULT -3: JP R6 R RT6 R R3 R3 R33 BR ODE 9 F F R 96 F0 D 93 F F7 3 JP BUZZER RESET 9 F9 FN3 6 JP OPEN:BUZZER DISBLE -:BUZZER ENBLE -3:TEST F R 9 JP R 6 R3 97 R 69 6 R D76 D70 D D67 D66 D7 6 JF JF F3 F F F6 MB-D MB- JPW JP69 R SPI 3 3 F36 R0 R03 F9 F0 F F F3 F3 0 F7 R67 TP TP3 TP J R 39 DEBUG R3 R69 D R6 R6 6 9 TP JPI TO PS 6 D SS7B D6 REV.0 DESIGNED IN US D9 D F R 67 JP36: OPEN:DEFULT LOSE:NY POWER BUTTON R3 JP JP36 FN JP3 JP3: OPEN:DEFULT LOSE:LED TEST U37 U3 R9 9 D6 7 7 D6 D60 9 D7 D6 D F3 66 JP R FN R3 R7 R6 JPW3 JF JF-B JPW R F3 F3 F33 F3 F7 F F9 F30 MB-B R R R06 MB- 6 JF JF SS-7B Backplane User's Guide Motherboard Power onnectors These connectors, designated JPW, JPW, and JPW3 supply power the four motherboard nodes in the chassis hassis Fan onnectors These connectors, designated JP, JP, JP6 and JP7 supply power to the chassis. cooling fans. System Fans ables FN FN3 FN FN SS-7B Backplane Figure -: Default onfiguration - Fans onnected Directly to the Backplane. Power Supply onnector The -pin connector, designated JPI provides power to the SMBUS and power control signals Motherboard to Backplane onnectors These connectors, designated JF, JF, JF3 and JF connect the motherboards to the backplane on the chassis. JF connects to motherboard. JF connects to motherboard B. JF3 connects to motherboard and JF connects to motherboard D. See the table on the previous page to determine the locations of the motherboards within the chassis. -

11 hapter : Safety Guidelines Backplane to Front Panel Headers These connectors are designated JF and JF6. They connect the backplane to the front LED panels on the chassis. JF connects to the LED display panel for motherboards and B. JF6 connects to the LED display panel for motherboards and D. -3

12 BZ D79 D JF6 JP7 7 D7 D73 JF6-D 03 FN 69 U F6 R R U3 R6 R7 R JP30: OPEN: -:0-3: JP30 3 R R07 R R06 R0 U3 67 DEFULT R6 R RT6 R R3 R3 R33 9 F F R 96 F0 D 93 F F7 3 JP BUZZER RESET 9 F9 FN3 6 JP OPEN:BUZZER DISBLE -:BUZZER ENBLE -3:TEST F R 9 JP R 6 R3 97 R 69 6 R D76 D70 D D67 D66 D7 6 6 F3 7 F F F6 3 7 MB-D MB- JPW JP69 R SPI 3 F36 R0 R03 3 F9 F0 F F F3 F3 0 F7 R67 J TP TP3 TP R DEBUG R3 R69 D 6 9 R6 R6 TP JPI TO PS 6 D D6 D9 D REV.0 DESIGNED IN US F R 67 JP36: OPEN:DEFULT LOSE:NY POWER BUTTON R3 JP JP36 FN JP3 JP3: OPEN:DEFULT LOSE:LED TEST U37 U3 R9 9 D6 7 7 D6 D60 9 D7 D6 D F3 66 JP R FN R3 R7 R6 JPW3 JF JF-B JPW R F3 F3 F33 F3 F7 F F9 F30 MB-B R R R06 MB- JF JF SS-7B Backplane User's Guide - Front Jumpers and Pin Definitions Buzzer JP JP30 JP3 JP36 JP69 JP30 BR ODE JP JP69 JF 3 0 JF3 0 J Figure -3: Front Jumpers Explanation of Jumpers To modify the operation of the backplane, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the connector. Pin is identified with a square solder pad on the printed circuit board. Note: On two pin jumpers, "losed" means the jumper is on and "Open" means the jumper is off the pins. SS7B Jumper Settings JP36JP3 onnector Pins Jumper Setting Jumper Jumper Settings Notes Open: Buzzer disabled -: Buzzer enabled (Default) -3: Test setting Overheat Settings Open: º elsius -: 0º elcius (Default) -3: º elcius Open: Default losed: LED test Open: Default, multiple power button functionality losed: Single power button functionality *Buzzer reset 3 3 Backplane overheat settings LED testing ny power button FW upgrade connector *The buzzer sound indicates that a condition requiring immediate attention has occurred. The backplane buzzer alarm is triggered by the following condition:. Backplane temperature over º, 0º or º elsius, depending upon the overheat setting selected. See the table above for details. -

13 BZ D79 D JF6 JP7 7 D7 D73 JF6-D 03 FN 69 U F6 R R U3 R6 R7 R JP30: OPEN: -:0-3: JP30 3 R R07 R R06 R0 U3 67 DEFULT R6 R RT6 R R3 R3 R33 9 F F R 96 F0 D 93 F F7 3 JP BUZZER RESET 9 F9 FN3 6 JP OPEN:BUZZER DISBLE -:BUZZER ENBLE -3:TEST F R 9 JP R 6 R3 97 R 69 6 R D76 D70 D D67 D66 D7 6 6 F3 7 F F F6 3 7 MB-D MB- JPW JP69 R SPI 3 F36 R0 R03 3 F9 F0 F F F3 F3 0 F7 R67 J TP TP3 TP R DEBUG R3 R69 D 6 9 R6 R6 TP JPI TO PS 6 D D6 D9 D REV.0 DESIGNED IN US F R 67 JP36: OPEN:DEFULT LOSE:NY POWER BUTTON R3 JP JP36 FN JP3 JP3: OPEN:DEFULT LOSE:LED TEST U37 U3 R9 9 D6 7 7 D6 D60 9 D7 D6 D F3 66 JP R FN R3 R7 R6 JPW3 JF JF-B JPW R F3 F3 F33 F3 F7 F F9 F30 MB-B R R R06 MB- JF JF hapter : Safety Guidelines -3 Front LED Indicator BR ODE D JF 3 0 JF3 0 D SS7B Figure -: Front LED Front Panel LED LED State Specification Heartbeat LED: D Blinking Blinking heartbeat indicates backplane activity Overheat LED: D Solid on Indicates an overheat condition -

14 SS J3 # #B SS SS # #0 J J REV.0 R R D6 D SS SS SS #B J J9 J R0 R9 R #B0 #0 D0 R6 D9 R R 60 3 L SS # SS SS # J7 J J3 R7 R79 R73 R6 R6 R7 D9 D D3 D D30 SS #D SS #D SS #D0 J0 J9 J R76 D3 R0 D6 D3 R7 R D R77 R D33 D7 SS-7B Backplane User's Guide - Rear onnectors and LED Indicators SS J3 SS J SS 0 J SS7T D D D3 D6 D D7 R6 R9 T#0 R3 R T# T# D D SS B J D3 SS B D D0 D D9 SS J7 SS D D9 D D3 SS D J0 SS D J9 D J D J9 D D30 SS B0 SS 0 SS D0 J J3 J Figure -: Rear onnectors and LEDs D7 T#B T#B T#B0 D D D D T# T# T#0 D D D33 D7 D3 D6 D3 T#D T#D T#D0 Rear SS/ST onnectors Rear onnector SS Drive Number Rear onnector SS Drive Number SS # SS/ST SS # SS/ST SS # SS/ST SS # SS/ST SS #0 SS/ST 0 SS #0 SS/ST 0 SS #B SS/ST B SS #D SS/ST D SS #B SS/ST B SS #D SS/ST D SS #B0 SS/ST B0 SS #D0 SS/ST D0 Rear LED Indicators Rear LED SS #0 SS # SS # SS #B0 SS #B SS #B SS #0 SS # SS # SS #D0 SS #D SS #D Hard Drive ctivity D D3 D D D D D D D D6 D7 D -6

15 hapter : Safety Guidelines SS Ports The SS-7B backplane is designed with four separate sectors, which support from one to four motherboards indepentdently of each other. The SS ports are used to connect the SS drive cables. The ports are designated 0,,, B0, B, B, 0,, and D0, D, D. Each port is also compatible with ST drives. Use the table below to determine the SS port to motherboard configuration that is appropriate for your system. Number of Motherboards SS Port to Motherboard onfigurations SS Port onnectors Using MB 0,, MB- Using MBs Using 3 MBs Using MBs 0,, B0, B, B 0,, B0, B, B 0,, 0,, B0, B, B 0,, D0, D, D onnect to Motherboard MB- MB-B MB- MB-B MB- MB- MB-B MB- MB-D Figure -6: Motherboard Locations In the hassis -7

16 SS-7B Backplane User's Guide Disclaimer (cont.) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical systems whose failure to perform be reasonably expected to result in significant injury or loss of life or catastrophic property damage. ccordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and proceedings of any kind arising out of or related to such ultra-hazardous use or sale. -