14.4V Slide Li-ion Impact Driver Drill. 2 x 3.0Ah Li-ion batteries 13mm chuck Hammer action. Part Number: DV14DSL(HL) Brushless motor

Transcription

1 POWER TOOLS 18V Rotary Hammer Drill Skin Only Max impact rate: 4,900 bpm SDS Plus fixed chuck Drills: Steel 10mm, Wood 22mm, Concrete 18mm Speed: rpm 1.8 Joules Safety clutch with alloy gearbox Variable speed and rubber grip Includes: side handle, carrying strap, depth Forward and reverse Part Number: BHA 18 SK LT 14.4V Slide Li-ion Impact Driver Drill 2 x 3.0Ah Li-ion batteries 13mm chuck Hammer action Battery power indicator Multiple protection circuit built into batteries Part Number: DV14DSL(HL) 25.2V Rotary Hammer Drill 3 Mode; Drill Steel and Wood / Concrete Chiselling Speed: 0-1,000 rpm Joules: Safety clutch - prevents kickback Soft start VTC electronics - constant Torque Includes: 2 x 2.2 Ah Li-Ion batteries, ASS 15 Plus air cooled charger, carry case Part Number: KHA 24 Li 14.4V Slide Li-ion Brushless Impact Driver Brushless motor 2 x 3.0Ah Li-ion batteries Impact rate selector Rotational speed selector Battery power indicator Part Number: WH14DBL(HL) 36V Rotary Hammer 3 mode SDS+ Rotary Hammer 3Joules 2 x 2.0Ah Li-Ion Compact batteries 45 min charge Product Code: GBH 36V-Li VF CORDLESS - IMPACT DRILLS 18V Mobile Brushless Impact Driver Brushless DC motor which creates more power with less maintenance and less heat Very compact design, only 139mm 3 stage impact selector, with a maximum torque of 165Nm Independent on/off LED job light Battery power warning lamp visually warns user that the remaining battery capacity is low One touch bit installation 22min battery charging time Part Number: BTD145RFE 10.8V Impact Driver NEW! Impact Driver 105 Nm Max Torque rpm no load speed includes L-BOXX by Sortimo Product Code: GDR 10.8V-Li 14.4V Cordless Lithium-Ion 1/4 Hex 3 Torque settings: 75/115/140Nm 3 Speed settings: 1,500/2,100/2,600rpm Battery overload and Electronic Single Cell Protection 1.7 kg Includes: 2 x 2.6 Ah Li-Ion batteries, ASC 30 air cooled charger, carry case Part Number: SSD V Li-ion Impact Driver 2 x 1.5Ah Li-ion batteries Multiple protection circuit built into batteries Battery power indicator 105Nm Max. Torque LED light Part Number: WH10DL(HL) 18V Impact Drill/Driver 160Nm 2 X 2.6Ah Li-Ion Batteries 30 Min Charger Product Code: GDR18V-Li 251

2 18V Impact Drill/Driver NEW! Redback 18v Impact Drill/Driver 0-400/1400RPM 21,000BPM 2x1.3Ah Li-Ion Batteries 45Nm 45min charge 1.5kg Product Code: GSB 18V-2 Li 18V Mobile 4 Piece Combo Kit Includes: BHP454Z - Mobile Hammer Driver Drill BSS610Z - Mobile 165mm Circular Saw BJR181Z - Mobile Recipro Saw BML185 - Swivel Head Torch BL x 3.0Ah Li-Ion Batteries DC18RA - Charger Part Number: LXT418 POWER TOOLS 18V Impact Drill/Driver Destroyer Heavy Duty Impact Drill 2 x 2.6Ah Li-Ion Batteries Electronic Motor Protection 80Nm 30 min Charge Product Code: GSB 18VE-2Li 18V Cordless Impact Driver 2 x 3.0Ah 18V Li-Ion batteries Powerful 150Nm of torque Only weighs 1.6kg Comfortable non-slip grip handle Part Number: WH18DL(HL) 10 Piece 18V Cordless Combo Kit WH18DL: Cordless Impact Driver DV18DL: Cordless Hammer Driver drill CR18DL: Cordless Reciprocating Saw EBM1830 x 4: 18V 3.0AH Li-Ion Batteries C18DL: Cordless Circular Saw G18DL: Cordless Grinder DH18DL: Cordless Rotary hammer CJ18DL: Cordless Jig saw RB18DL: Cordless Blower UB18DL: Lantern 2 x Heavy duty site bags UB18D: Torch Part Number: MP18(HL) V Cordless Lithium-Ion 1/4 Hex 3 Torque settings: 80/125/160Nm 3 Speed settings: 1600/2150/2650Nm Battery overload and Electronic Single Cell Protection 1.8 kg Includes; 2 x 2.6 Ah Li-Ion batteries, ASC 30 air cooled charger, side handle, carry case Part Number: SSD 18 CORDLESS KITS 10.8V Cordless Combo Kit PowerMaxx 12 Drill/Driver PowerImpact 12 Impact Driver 2 x 1.5 Ah Li-Ion 12 batteries LC 40 Charger Part Number: max 12 Combo Kit 18V Cordless Kit - 4 Piece SB 18 LTX, 100 Nm Hammer Drill KSA 18 Circular Saw ASE 18 Sabre Saw ULA Torch 2 x 2.6 Ah Li-Power Extreme batteries Part Number: SB LTX 4 Kit 18V Cordless Kit - 4 Piece SB 18 LTX, 100 Nm Hammer Drill BHA 18 LT, 1.8J SDS Plus 2x mode, Rotary Hammer ASE 18 Sabre Saw ULA Torch 2 x 2.6 Ah Li-Power Extreme batteries Part Number: SB LTX R4

3 POWER TOOLS 18V Cordless Kit - 5 Piece SB 18 LTX, 100 Nm Hammer Drill KSA 18 Circular Saw ASE 18 Sabre Saw SSD 18 Impact Driver ULA Torch 2 x 2.6 Ah Li-Power Plus batteries Part Number: SB LTX 5 PLUS 18V Cordless Kit - 6 Piece SB 18 LTX, 100 Nm Hammer Drill BHA 18 LT, 1.8J Rotary Hammer KSA 18 Circular Saw ASE 18 Sabre Saw SSD 18 Impact Driver ULA Torch 2 x 2.6 Ah Li-Power Plus batteries Part Number: SB LTX R6 PLUS 18V Cordless Kit - Twin Pack BS 18 L, 48 Nm Drill/Driver SSD 18, ¼ Hex Impact Driver, up to 160 Nm 2 x 2.2Ah Li-Power Plus batteries Part Number: BSL-SSD 18 18V Cordless Kit - Twin Pack BS 18 LT, 60 Nm Drill/Driver SSD 18, ¼ Hex Impact Driver, up to 160 Nm 2 x 2.6 Ah Li-Power Plus batteries Part Number: BSLT-SSD 18 18V Cordless Kit - Twin Pack SB 18 LT, 62 Nm Hammer Drill SSD 18, ¼ Hex Impact Driver, up to 160 Nm 2 x 2.6Ah Li-Power Plus batteries Part Number: SBLT-SSD 18 Destroyer Kit 18V Kit - includes: 18V-Li Impact Drill Circular Saw Sabre Saw Bag and 3 x 2.6Ah Li-Ion Batteries. Product Code: 18V-Li Destroyer Kit 18V Cordless Kit - Twin Pack SB 18 LT, 62 Nm Hammer Drill SSW 18, ½ Square Impact Wrench, up to 220 Nm 2 x 2.6Ah Li-Power Plus batteries Part Number: SBLT-SSW 18 Extreme Kit Impact Drill Sabre Saw Circular Saw 1 X 2.6Ah/2 x 1.3Ah Li-Ion batteries Product Code: 18X2 Extreme Kit 1/2 Cordless Drill/Driver Kit The most power per pound of any cordless drill/driver in its class Industrial grade performance. Composite housing with metal subframe for unbreakable strength. Ideal for all drilling, boring, fastening and screwing applications. D650-KL2 comes with 2 x Li-Ion Batteries, Charger and IR Hard Case. Weight 1.45kg without battery. Part Number: D650-KL2 253

4 ELECTRIC - HAMMER COMBI DRILLS POWER TOOLS 1300W Combi Hammer - SDS Max 2 mode; Rotary hammer drilling, chiselling Impacts: 2,840 ipm Drilling Capacity; Ø45mm Torque Limiting Clutch Weight; 6.7kg Metabo Vibra Tech; reduced vibration in handles Constant Torque and Soft Start 8/14 Joules LED Service Lights; Power and brush wear indicator Includes: Vibra tech side handle, grease, cloth, carry case Part Number: KHE W Combi Hammer - SDS Max 2 mode; Rotary hammer drilling, chiselling Impacts: 1,950 ipm Drilling Capacity; Ø50mm 27 Joules Torque limiting clutch Metabo Vibra Tech; reduced vibration in handles Constant Torque and soft start Weight; 11.8kg Includes: Vibra tech side handle, grease, cloth, carry case Part Number: KHE 96 ELECTRIC - IMPACT HAMMER DRILLS 560W Impact / Hammer Drill Variable Speed: 0-2,800 rpm Drills: Steel, Wood, Concrete10mm / 20mm / 12mm Forward & Reverse 13mm keyless chuck Auto Stop Carbon Brushes Rubber Grip handle Weight 1.7kg Includes: Side handle, depth stop, carry case Part Number: SBE W Impact / Hammer Drill Variable Speed: 0-1,000/0-3,100 rpm Drills: Steel, Wood, Concrete 13mm / 40mm / 20mm Alloy 2 x speed gearbox Safety Clutch - prevents kickback Marathon Motor - extends tool life Auto Stop Carbon Brushes 13mm metal keyless chuck Includes: Side handle, depth stop, carry case Part Number: SBE mm Hammer Drill Aluminum gear housing cover Keyed chuck Side handle swivels 360 Variable switch with forward/reverse change lever Rubberised soft grip Dual-operation mode: Rotation only/hammering with rotation Part Number: HP1630K 13mm 2 Speed Hammer Drill This power packed hammer drill will take on the most demanding jobs with ease Built in torque limiter reduces risk of damage to the drill and operator if the bit jams 2 speed gearbox forward / reverse Keyless chuck Part Number: HP mm Light Industrial Impact Drill Powerful 530W motor 13mm keyless chuck for quick and easy replacement of accessories Ball and needle bearing construction Standard with carry case Part Number: FDV16VB2 16mm Impact Drill Compact design ensures high operation Comfortable, easy to grip handle Lightweight of only 1.5kg Powerful 590 watts Part Number: DV16V 20mm Impact Drill Synchronised gear shift mechanism Powerful 730W motor Easy to handle large trigger Variable speed and reverse Part Number: DV20VB2(H8) W Impact / Hammer Drill Variable Speed:0-900/0-2,600 rpm Drills: Steel, Wood, Concrete 16mm / 40mm / 20mm Alloy 2 x sped gearbox Safety Clutch - prevents kickback Marathon Motor Auto Stop Carbon Brushes 13mm metal keyless chuck Soft Start Restart and overload protection, Carbon Brush wear - LED Constant Torque Includes: Side handle, depth stop, carry case Part Number: SBE 1100 Plus 1100W Impact Drill NEW! 1100 W Impact Drill 0-900/3000 rpm overload clutch Auto-lock 13 mm keyless chuck 22mm concrete capacity Product Code: GSB21-2 RE KLC

5 60 Piece Metric & AF Socket & Spanner Set 1/4 and 1/2 Drive Sockets and Accessories, Ring and Open End Spanners, Replacement Box Only Part Number: HAND TOOLS 205 Piece Premium Tool Kit New Premium Storage, Convenient metric top tray, New Style red inserts, Upgraded pliers, New AntiVibe BP Hammer, New Ergo Style Adjustable wrench, ¼ Sockets 4-10mm and 3/16 3/8 + accessories, 3/8 Sockets 10-19mm and 3/8 ¾ + accessories, ½ Sockets 8-32mm and 3/8 1 3/16 + accessories, Spanners ROE 6-32mm & ¼ - 1-1/4, 18 Hex Keys, Flare Nut Spanners x 9, Geared Spanners Flex Head 10 14mm, Punches & Chisels x 10, Screwdrivers x 10, Shifters 150mm and 300mm, Hacksaw, Mirror, Magnet, Aviation Snips, Universal shears, Pliers Comb, Diag, Long Nose, Locking, Circlip Int and Ext, Multi Grips, Feeler Gauge, Circuit Tester, 8M Tape, Utility Knife, T-Handle Ratchet Screwdriver 21 Piece. Part Number: Piece 1/4 & 1/2 Square Drive Metric & AF Socket & Spanner Set 7 Metric 1/4 Drive Sockets: 4-10mm, 7 AF 1/4 Drive Sockets: 3/16-3/8, 12 Metric 1/2 Drive Sockets: 8-19mm, 7 AF 1/2 Drive Sockets: 3/8-3/4, 10 Metric ROE Spanners: 8-19mm, 8 AF ROE Spanners: 1/4-11/16, Ratchets, Extension, Universal Joint, Spark Plug Sockets, Adjustable Offset Handle, Bit Holder, 18 Screwdriver Bits, Blow Mould Case Part Number: Piece 3/8 Square Drive Metric & AF Socket & Spanner Set 11 Metric ROE Spanners: 10-20mm, 12 Metric Sockets: 10-20mm, 9 AF Sockets: 3/8-7/8 Part Number: Piece Premium Tool Cabinet New Premium Storage, Convenient metric top tray, New Style red inserts, Upgraded pliers, New AntiVibe BP Hammer 680g, ½ Heavy Duty Impact Wrench 500ft/lb, New Ergo Style Adjustable wrench, ¼ Sockets 4-10mm and 3/16 3/8 + accessories, 3/8 Sockets 10-19mm and 3/8 ¾ + accessories, ½ Sockets 8-32mm and 3/8 1 3/16 + accessories, Impact Sockets 10-32mm,Spanners ROE 6-32mm and ¼ - 1-1/4, Spanners OE 6x7 30x32 and 1/4x5/16 1-1/8x1-1/4, 18 Hex Keys, Flare Nut Spanners x 9, Geared Spanners Flex Head 10 14mm, Geared Spanners Stubby 10-19mm and 3/8 ¾, Speed Spanners 8-19mm, Digital Verniers 200mm, Multimeter with temperature, ½ drive Torque Wrench, Inhex Sockets x 22 (standard and Spline drive), Punches and Chisels x 23, Screwdrivers Thru Tang x 8, Shifters 150, 200 and 300mm, Hacksaw, Mirror, Magnet, Aviation Snips, Universal shears, Pliers Comb, Diag, Long Nose, Locking, Circlip Int and Ext, Multi Grips, Feeler Gauge, Circuit Tester, 8M Tape, Utility Knife, T-Handle Ratchet Screwdriver 21 Piece Part Number: Piece 1/2 Drive Metric Socket Set 1/2 Drive Sockets & Accessories, 19 Metric Sockets: 8-32mm, Compact Head Reversible Ratchet, Extensions: 125, 250mm, Adjustable Offset Handle - 220mm with new design handle grip, Universal Joint, Blow Mould Case Part Number: Socket & Spanner Set 1/2 Drive Each spanner fits metric and inch, plus damaged and rounded nuts and bolts 30 piece set = 88 piece conventional set Part Number Fits MET mm - 31mm or 3/8-17/32

6 CORDLESS - RECIPROCATING SAW 1/2 Cordless Impact Wrench Kit Powerful cordless Impactool (360ft-lb/488Nm). Lightweight Composite housing with metal subframe for unbreakable strength. Unique Twist to lock mount design attaches battery securely to tool. All metal hammer-case and housing ring. Variable Trigger. W360-KL2 comes with 2 x Li-Ion Batteries, Charger and IR Hard Case. Weight 2.2kg without battery. Part Number: W360-KL2 CORDLESS NAILER 18V Reciprocating / Sabre Saw - Skin Only Strokes per/min 0-2,700 Stroke Length 30mm Quick release blade change Saw blade rotatable by 180 Part Number: ASE 18 SK LTX CORDLESS - IMPAct wrenches POWER TOOLS Gas Framing Nailer Uses Lithium-Ion battery technology as ignition source 1,200 nails (approx.) the number of nails per fuel cell Ergonomically designed handle with rubberised soft grip Dual position hook convenient for hanging from rafter or steel pipe Aggressive spikes allow for firm grip on material when firing LED indication lamp with two convenient functions: - Battery power warning - Trouble detection Part Number: GN900 CORDLESS - POWERSHEAR 18V Cordless Powershear Cuts 1.6mm sheet steel, 1.2mm stainless steel 50mm minimum cut radius 2-speed: 400/1,400 rpm Battery overload and Electronic Single Cell Protection Includes: 2 x 2.6 Ah Li-Ion batteries, ASC 30 air cooled charger, carry case Part Number: KU 18 LT CORDLESS radio 18V Cordless Lithium-Ion 1/2 Square Drive 3 Torque settings: 105/145/220Nm 3 Speed settings: 1,600/2,150/2,650rpm Battery overload and Electronic Single Cell Protection 1.8 kg Includes: 2 x 2.6 Ah Li-Ion batteries, ASC 30 air cooled charger, carry case Part Number: SSW V Slide Li-ion Impact Wrench 2x 3.0Ah Li-ion batteries Battery power indicator Multiple protection circuit built into batteries Ergonomic soft grip handle Part Number: WR14DSL(HL) 18V Cordless Impact Wrench Naked Only weighs 1.6kg Comfortable non-slip grip handle With 2-step action switch lever (Power mode/save mode) Same torque at reverse rotation 1/2 Square drive Part Number: WR18DL(H4) 254 Jobsite Radio 2 speaker stereo system - max. output power 5W x2 (24V battery), diameter 76mm (8 ohm) x 2 Bumpers and metal pipes protect against rough handling Dual power sources - AC or Makita batteries Digital quartz display Mp3 compatibility Part Number: BMR100 18V Cordless Impact Wrench Only weighs 1.6kg Comfortable non-slip grip handle With 2-step action switch lever (Power mode/save mode) Same torque at reverse rotation 1/2 Square drive Part Number: WR18DL(HD)

7 ELECTRIC - IMPACT WRENCHES 800W Rotary Hammer Drill SDS+ Rotary Hammer 800W 0-900rpm 3 mode 3J Product Code: GBH 2-26DBR 12.7mm Impact Wrench Powerful 480W motor with maximum torque of 360Nm Compact and lightweight Slip resistant and comfortable soft grip handle Higher durability thanks to metallic bearing bushing Part Number: WR16SA 900W Rotary Hammer Drill SDS+ Rotary Hammer 900w 4-32mm concrete capacity Quick change chuck 5J Kit includes: 4kg Hammer, Quick change Chuck, Spade and Point Chisel 6 piece Spade bit ser, 4 SDS PLUS drill bits Product Code: GBH 4 Premium Impact Wrench Powerful 850W motor with maximum torque of 610Nm Compact and lightweight Slip resistant and comfortable soft grip handle Durable double-insulated motor due to the highly strong (rigid) aluminium die-cast body Part Number: WR22SA ELECTRIC - jigsaws POWER TOOLS electric - high torque drills 13mm High Torque Drill Adjustable handles for comfortable grip Built for high torque applications Powerful 720W motor Triple reduction gearing Part Number: D13 570W Variable Speed Jigsaw Variable Speed: 1,000-3,300 rpm Cutting Capacity; Wood; 70mm NF Steel; 20mm 4 level pendulum blade movement; allows faster, cleaner cutting and extends blade life Blower for free view of cutting line Anti-splintering insert Includes: Blade, carry case, allen key Base plate with quick stop bevel settings for 15º, 30º & 45º Part Number: STEB 70Q 750w High Torque Drill - 75Nm Variable speed; rpm Drills: 16mm Steel, 40mm Wood 13mm keyed chuck Safety Clutch - prevents kickback Auto Stop Carbon Brushes Side handle Weight; 2.3kg Includes: side handle Part Number: BE W Variable Speed Jigsaw Variable Speed: 1,000-3,000 rpm Cutting Capacity; Wood; 135mm NF Steel; 35mm 5 level pendulum blade movement; allows faster, cleaner cutting and extends blade life Blower for free view of cutting line Anti-splintering insert Auto stop carbon brushes Base plate with quick stop bevel settings for 15º, 30º & 45º Includes: 3 x Blades, carry case, allen key Part Number: STE 135 Plus W Extra High Torque Drill 55Nm Variable Speed: 0-640/0-1,200 rpm Drills: Steel, wood 16mm / 40mm Forward and reverse Safety Clutch - prevents kickback Alloy 2 x speed gearbox 16mm metal keyed chuck Auto Stop Carbon Brushes Includes: Side handle, depth stop Part Number: BDE 1100 Jigsaw Powerful 720W motor Professional Jigsaw designed to give a superior finish Variable speed control with constant speed electronics Extremely low vibration Quick tool-less blade changes Barrel handle design Built in dust blower Tilting base that cuts up to 45 3 mode oscillating feature allows faster cutting Built-in Maklite for easy tracing of cutting line when lighting is inadequate Part Number: 4351FCT

8 AIR TOOLS & EQUIPMENT (COMPRESSORS) WRENCHES - IMPACT 1 /2 Air Impact Wrench Twin hammer mechanism High torque and powerful Bolt capacity: 5/8 (16mm) Maximum torque: 1,000 ft-lb (1350Nm) Free speed: 10,000 rpm Air inlet: 1/4 Maximum air pressure: 90psi Part Number: /2 Impact Wrench 600ft-lb 1/2 Drive Max Torque: 550 ft-ib Adjustable Dial Power 2 extended anvil model avail, 2130AP-2 Handle exhaust Lightweight Composite Body 1.90kg Av. Air Consumption 4.4cfm Also available in a kit Part Number: 2130AP & 2130AP-2 1/2 Dr Twin Hammer Impact Wrench - Heavy Duty At 380ft. lb of torque power for stubborn bolts. Built-in power regulator to control speed and torque Part Number: CHPL1502 1/2 Dr Impact Wrench - Heavy Duty 450ft lbs 1/2 impact wrench Designed for tyre shop, suspension, chassis and other heavy duty automobile applications Part Number: CHPL2502 1/2 Impact Wrench 780ft-lb Ultimate 1/2 Drive Max Torque: 780 ft-ib Adjustable Dial Power 2135Ti-2MAX 2 Anvil Handle exhaust Lightweight Composite Body 1.79kg Av. Air Consumption 5cfm 2135QTiMax Quiet Tool Technology Also available in a kit, 2135TiMax-Kit Part Number: 2135TiMax 1/2 DR Impact Wrench Ultimate torque - 600ft lb Working torque range ft lb 7,000 RPM 88 dba Length - 204mm Weight - 2.2kg Part Number: SM030 1/2 Square Drive Impact Wrench Composite body Reversible Max Torque: 627 ft.lbs / 850Nm Working Torque: ft.lbs Part Number: E1490 1/2 Impact Gun Twin Dog Hammer 185mm long 2.58kg 16mm capacity 600ft/lbs max torque 870L/min max, 261L/min av air consumption Product Code: SP-1140EX 1/2 Impact Wrench 450ft-lb Max Torque: 450 ft-ib (rev) Pressure Feed lubrication Adjustable power regulator Weight 2.63kg Av. Air Consumption 4.2cfm Handle exhaust 2 extended anvil avail. 131S-2-EA Also available in a kit, 131S-EA-Kit Part Number: 131S-EA & 131S-2-EA 1/2 Impact Gun Twin Pin Hammer 190mm long 2.5kg 16mm capacity 425ft/lbs max torque 808L/min max, 242L/min av air consumption Product Code: SP-1145A 311

9 AIR TOOLS & EQUIPMENT (COMPRESSORS) Spark Proof 1/2 Impact Wrench 600ft-lb Fully Certified to ATEX Directives ½ Square drive Impact wrench Max Torque 600ft-lb reverse High output Twin Hammer Av. Air Consumption 4.8cfm Pressure-feed lubrication system Reverse biased motor cylinder One hand operation forward/reverse 360 degree swivel inlet In-handle exhaust Part Number: 2131PSP 3/4 Impact Wrench 1200ft-lb 3/4 Drive Max Torque: 1200 ft-ib Weighs just 3.2 kg Lightweight Composite Body 3.2kg Only 208 mm long Handle exhaust Av. Air Consumption 9.5cfm 2141S New Silenced Mode Also available in a kit, 2141-Kit Part Number: /4 DR Impact Wrench Torque - 950ft lb Bolt capacity - 1-1/16 Length - 235mm Part Number: SG0756 4,000 RPM 90.8 dba Weight - 5.6kg 1 Pistol Grip Impact Wrench 1200ft-lb 1 Drive Max Torque: 1200ft-Ib Weighs just 3.4 kg Handle exhaust Only 208 mm long Part Number: DR Impact Wrench Torque - 1,200ft lb Bolt capacity - 1-1/4 Length - 355mm Part Number: SG0708S 4,000 RPM 82 dba Weight kg 1 Impact Gun Jumbo Hammer 250mm long 9kg 38mm capacity 1800ft/lbs max torque 1130L/min max, 339L/min av air consumption Product Code: SP-1190P D-Handle Impact Wrench 1450ft-lb 1 Drive Max Torque: 1,450ft-Ib Side handle 4 Position power regulator Angled down exhaust 360 degree swivel inlet 6 extended anvil model avail 285B-6 Part Number: 285B & 285B-6 KT3800G PRO 312 3/4 Impact Gun Twin Pin Hammer 280mm long 5.4kg 25mm capacity 950ft/lbs max torque 971L/min max, 291L/min av air consumption Product Code: SP-1156TR 3/4 Impact Gun Jumbo Hammer 220mm long 5.5kg 25mm capacity 1100ft/lbs max torque 1080L/min max, 324L/min av air consumption Product Code: SP-1158 Kuken Impact Wrenches N Type Ideal for heavy industrial and mining applications Ergonomic design, low vibration and low noise Innovative no hammer clutch system Excellent power, compactness, light in weight with very low air consumption Shift on action ensure less damage to bolts and nuts Model Number Square Drive Handle Type Bolt Capacity Max Torque Nm ft/lbs Speed (rpm) Weight KT1600S PRO 1/2 Pistol 16mm , kg KT2500P PRO 3/4 Pistol 25mm , kg KT2800PA 3/4 Pistol 28mm , kg KT3800G PRO 1 D- Handle 38mm , kg KT4500G 1 D- Handle 45mm , kg KT5000G 1 1/2 D- Handle 50mm , kg

10 AIR TOOLS & EQUIPMENT (COMPRESSORS) Kuken Impact Wrenches Conventional Ideal for all heavy duty applications in mining, truck and construction applications Delivers extra powerful performance and durability Well balanced for easy handling Wide variety of models available to suit most fastening applications Model Number Square Drive Handle Type Bolt Capacity Max Torque Nm KT20P ft/lbs Speed (rpm) Weight KT18HP 1/2 Pistol 18mm , kg KT20P 3/4 Pistol 20mm , kg KT420G 1 D-Handle 42mm , kg 3/8 Ratchet 254mm long 160rpm 10mm capacity 124ft/lbs hand torque 525L/min max, 158L/min av air consumption Product Code: SP-1133SX 1/2 Ratchet 254mm long 160rpm 12mm capacity 124ft/lbs hand torque 525L/min max, 158L/min av air consumption Product Code: SP-1133SX-2 WRENCHES - RATCHET 1/4 & 3/8 DR Ratchets Torque - 30ft lb 260 RPM 85 dba Length - 133mm Weight - 0.4kg Ratchet Wrench 3/8 drive (170) or 1/2 drive (1770) Max Torque: 60 ft-ib (81 Nm) Working Torque: ft-ib Great value IR ratchet Length: 260 mm Weight: 1.1 kg Ave Air Cons: 4.0 cfm 113 lpm Part Number: 170 & 1770 Part Number SM036 SM041 1/4 DR Mini Ratchet Description 3/8 DR Mini Ratchet, Wobble Anvil 3/8 Dr Air Ratchet - Heavy Duty 55ft. lbs of torque provides the power to remove and install nuts, bolts and spark plugs in medium duty engine repair. Part Number: CHPL1501 3/8 & 1/2 DR Ratchets Torque - 50ft lb 150 RPM Length - 250mm Weight - 1.1kg Compact head design allows flexibility in tight areas Part Number Description Bolt Capacity SM30 3/8 DR Ratchet 3/8 SM31 1/2 DR Ratchet 1/2 3/8 Dr Heavy Stubby Air Ratchet Stubby air ratchet. Durable aluminium body rear exhaust. Heavy duty ratchet head. 18ft/lb 250RPM. Part Number: CHSA1601 1/2 Drive Air Wrench Front exhaust Max Torque: 66 ft.lbs / 89Nm Part Number: E1325A 3/8 Mini Ratchet Wrench 170mm long 310rpm 10mm capacity 40ft/lbs hand torque 485L/min max, 146L/min av air consumption Product Code: SP /2 Dr Air Ratchet - Medium Duty 90ft. lbs of torque provides the power to remove and install large fasteners on outboard engines, tractors and other heavy machinery. Ball socket retainer provides fast and easy socket replacement. Part Number: CHPL