Bingsen Wang. Power converter topologies including matrix converters, multilevel converters

Transcription

1 Bingsen Wang Campus Address: Department of Electrical and Computer Engineering Michigan State University 2120 Engineering Building East Lansing, MI Tel: (517) Fax: (517) Homepage: Education Doctor of Philosophy, Electrical Engineering, 2006 University of Wisconsin, Madison, Wisconsin Dissertation: Flywheel Based AC Power Conditioning System Using a Matrix Converter. Advisor: Professor Giri Venkataramanan Master of Science, Electrical Engineering, 2002 University of Kentucky, Lexington, Kentucky Thesis: DSP-Controlled Space-Vector PWM Current-Source Converter For Static Synchronous Compensator (STATCOM) Application. Advisor: Professor Jimmie J. Cathey Master of Engineering, Electrical Engineering, 1997 Shanghai Jiao Tong University, Shanghai, China Thesis: All Digital Space Vector Pulse Width Modulation Based on EEPROM Storage. Advisor: Professor Rending Li Bachelor of Science, Electrical Engineering, 1994 Shanghai Jiao Tong University, Shanghai, China Research Areas Reliability modeling and control of power electronic systems Power converter topologies including matrix converters, multilevel converters Application of power electronics in renewable energy generation and grid interface Vector control of ac electric drive systems

2 Bingsen Wang 2 Employment Experiences Full-Time Employment Assistant Professor, Jan present Michigan State University, East Lansing, Michigan Duties include teaching and research in the area of power electronics and its application in utilities and industrial processes Assistant Professor, Jan Dec Arizona State University, Tempe, Arizona Duties include teaching and research in the area of power electronics and its application in renewable energy interface. Utility Power Electronics Engineer, Oct Dec General Electric Global Research Center, Niskayuna, New York Duties include research of electronic power conversion focused on high-power applications. Electrical Engineer, Jan Dec Carrier Air Conditioning Co., Shanghai, China Duties include design of electric control system for high-capacity commercial chillers and heat-pumps. Part-Time Employment Research Assistant, Jan Sep University of Wisconsin, Madison, Wisconsin Duties include modeling and control of ac-ac power converters for improving power quality. Teaching Assistant, Jan May 2005 University of Wisconsin, Madison, Wisconsin Duties include assistance to teaching the course Power Electronics Circuits. Research Assistant, Jan Dec University of Kentucky, Lexington, Kentucky Duties include modeling and control design of a Static Synchronous Compensator (STATCOM) using a current source converter. Research Assistant, Sep Dec Shanghai Jiao Tong University, Shanghai, China Duties include design and implementation of a digital pulse width modulation (PWM) controller for fractional horsepower motor applications. Research Journal Articles [J1] F. Niu, B. Wang, A. S. Babel, K. Li, and E. G. Strangas, Comparative evaluation of direct torque control strategies for permanent magnet synchronous machines, IEEE Transactions on Power Electronics, vol. 31, no. 2, pp , [J2] Y. Song and B. Wang, Evaluation methodology and control strategies for improving reliability of HEV power electronics systems, IEEE Transactions on Vehicular Technology, vol. 63, no. 8, pp , 2014.

3 Bingsen Wang 3 [J3] Y. Song and B. Wang, Analysis and experimental verification of fault-tolerant HEV powertrain, IEEE Transactions on Power Electronics, vol. 28, no. 12, pp , [J4] B. Wang and E. Sherif, Spectral analysis of matrix converters based on three dimensional Fourier integral, IEEE Transactions on Power Electronics, vol. 28, no. 1, pp , [J5] Y. Song and B. Wang, Survey on reliability of power electronic systems, IEEE Transactions on Power Electronics, vol. 28, no. 1, pp , [J6] B. Wang and G. Venkataramanan, Dynamic voltage restorer utilizing a matrix converter and flywheel energy storage, IEEE Transactions on Industry Applications, vol. 45, no. 1, pp , [J7] R. Lai, F. Wang, R. Burgos, Y. Pei, D. Boroyevich, B. Wang, T. A. Lipo, V. D. Immanuel, and K. Karimi, A systematic topology evaluation methodology for high-density three-phase PWM ac-ac converters, IEEE Transactions on Power Electronics, vol. 23, no. 6, pp , [J8] B. Wang, G. Venkataramanan and A. Bendre, Unity power factor control for three phase three level rectifiers without current sensors, IEEE Transactions on Industry Applications, vol. 43, no. 5, pp , [J9] B. Wang, G. Venkataramanan and M. Illindala, Operation and control of a dynamic voltage restorer using transformer coupled H-bridge converters, IEEE Transactions on Power Electronics, vol. 21, no. 4, pp , [J10] E. Zhang, X. Wang, G. Yuan, X. Sun, L. Chen, J. Jiang, Z. Xu, B. Wang, and X. Liu, Study on the Home-made Control Set of Air Cooling Heat Pump (in Chinese), Fluid Machinery, vol. 31, no. z1, pp , [J11] B. Wang and J. Cathey, DSP-controlled, space-vector PWM, current-source converter for STAT- COM application, Electric Power Systems Research Journal, vol. 67, no. 2, pp , Patents [P1] B. Wang, Power source inverter for use with a photovoltaic solar panel, Patent No.: US 9,431,924, [P2] J. Foss, R. Wlezien and B. Wang, Maximally efficient vertical axis wind turbine, Patent No.: US 9,309,863, [P3] B. Wang and C. Bush, Single phase current source power inverters and related methods, Patent No.: US 8,619,447, [P4] B. Wang and J. Bo, All-digital three-phase pulse width modulated wave generator, Patent No.: CN Y, Refereed Conference Papers [C1] A. Janabi and B. Wang, Variable mode model predictive control for minimizing the thermal stress in electric drives, accepted to Proceedings of IEEE International Electric Machines & Drives Conference, Miami, FL, May , [C2] F. Yao, L. Geng, A. Janabi and B. Wang, Impact of modulation schemes on dc-link capacitor of VSI in HEV applications, accepted to Proceedings of IEEE International Electric Machines & Drives Conference, Miami, FL, May , 2017.

4 Bingsen Wang 4 [C3] A. Janabi and B. Wang, shunt and series conditioning schemes for hybrid matrix converter, in Proceedings of 42 nd Annual Conference of IEEE Industrial Electronics Society, Florence, Italy, Oct , 2016, pp [C4] A. Janabi and B. Wang, Hybrid matrix converter based on instantaneous reactive power theory, in Proceedings of 41 st Annual Conference of IEEE Industrial Electronics Society, Yokohama, Japan, Nov. 9-12, 2015, pp [C5] L. A. Hmoud and B. Wang, Real-time optimization of thermal cycling capability of rotor side converter in doubly fed induction generator- based wind energy conversion system, in Proceedings of 47 th North American Power Symposium, Charlotte, NC, Oct. 4-6, [C6] A. Janabi and B. Wang, Evaluation of methods of determining the compensating current and voltage of the hybrid matrix converter, in Proceedings of 47 th North American Power Symposium, Charlotte, NC, Oct. 4-6, [C7] F. Niu, K. Li, B. Wang and E. G. Strangas, Comparative evaluation of direct torque control strategies for permanent magnet synchronous machines, in Proceedings of 29 th Annual IEEE Applied Power Electronics Conference (APEC), Fort Worth, TX, Mar , 2014, pp [C8] Y. Song and B. Wang, A fault-tolerant hybrid electric vehicle powertrain, in Proceedings of 5 th Annual NDIA Ground Vehicle Systems Engineering and Technology Symposium, Troy, MI, Aug , 2013, pp [C9] B. Wang, P. Hinkel and Y. Song, Single phase VSI with reduced-size dc-link capacitor, in Proceedings of 4 th International Conference on Power Engineering, Energy and Electric Drives, Istanbul, Turkey, May 13-17, 2013, pp [C10] Y. Song and B. Wang, Quantitative evaluation for reliability of hybrid electric vehicle powertrain, accepted to Proceedings of 4 th International Conference on Power Engineering, Energy and Electric Drives, Istanbul, Turkey, May 13-17, 2013, pp [C11] B. Wang and G. Venkataramanan, Dynamics and stability of matrix-converter based permanent magnet wind turbine generator, in Proceedings of 38 th Annual Conference of IEEE Industrial Electronics Society, Montreal, Canada, Oct , 2012, pp [C12] Q. Lei, B. Wang and F. Z. Peng, Unified space vector PWM control for current source inverter, in Proceedings of 4 th IEEE Energy Conversion Congress and Exposition, Raleigh, NC, Sept , 2012, pp [C13] W. Hassan and B. Wang, Efficiency optimization of PMSM based drive system, in Proceedings of 7 th International Power Electronics and Motion Control Conference, Harbin, China, Jun. 2-5, 2012, pp [C14] B. Wang and E. Sherif, Analytical characterization of the spectral performance of matrix converters, in Proceedings of 7 th International Power Electronics and Motion Control Conference, Harbin, China, Jun. 2-5, 2012, pp [C15] Y. Song and B. Wang, A hybrid electric vehicle powertrain with fault-tolerant capability, in Proceedings of 27 th Annual IEEE Applied Power Electronics Conference, Orlando, Florida, Feb. 5-9, 2012, pp [C16] Y. Song and B. Wang, A photovoltaic power conversion system with flat efficiency curve over a wide load range, in Proceedings of 37 th Annual Conference of IEEE Industrial Electronics Society, Melbourne, Australia, Nov. 7-10, 2011, pp

5 Bingsen Wang 5 [C17] R. Amiri and B. Wang, A generic framework for wind power forecasting, in Proceedings of 37 th Annual Conference of IEEE Industrial Electronics Society, Melbourne, Australia, Nov. 7-10, 2011, pp [C18] B. Wang, A series compensator based on ac-ac power converters with virtual quadrature modulation, in Proceedings of 2 nd International Symposium on Power Electronics for Distributed Generation Systems, Hefei, China, Jun , 2010, pp [C19] H. Gao and B. Wang, Feedback linearization control of three-phase buck-boost inverters, in Proceedings of 35 th Annual Conference of the IEEE Industrial Electronics Society, Porto, Portugal, Nov. 3-5, [C20] C. Bush and B. Wang, A single-phase current source solar inverter with reduced-size dc link, in Proceedings of 1 st IEEE Energy Conversion Congress and Exposition, San Jose, CA, Sept , 2009, pp [C21] B. Wang and H. Gao, Buck-boost dc-ac converters suitable for renewable applications, in Proceedings of IEEE Energy 2030, Atlanta, GA, Nov , [C22] B. Wang, Four-level neutral point clamped converter with reduced switch count, in Proceedings of 39 th IEEE Power Electronics Specialists Conference, Rhodes, Greece, Jun , 2008, pp [C23] B. Wang and G. Venkataramanan, Dynamic voltage restorer utilizing a matrix converter and flywheel energy storage, in Record of IEEE Industry Application Society 42 nd Annual General Meeting, New Orleans, LA, Sept , 2007, pp [C24] B. Wang and G. Venkataramanan, Analytical modeling of semiconductor losses in matrix converters, in Proceedings of 5 th International Power Electronics and Motion Control Conference, Shanghai, China, Aug , 2006, pp [C25] B. Wang and G. Venkataramanan, A carrier based PWM algorithm for indirect matrix converters, in Proceedings of 37 th IEEE Power Electronics Specialists Conference, Jeju, Korea, June 18-22, 2006, pp [C26] B. Wang and G. Venkataramanan, Six step modulation of matrix converter with increased voltage transfer ratio, in Proceedings of 37 th IEEE Power Electronics Specialists Conference, Jeju, Korea, June 18-22, 2006, pp [C27] B. Wang, G. Venkataramanan and A. Bendre, Unity power factor control for three phase three level rectifiers without current sensors, in Record of IEEE Industry Application Society 40 th Annual General Meeting, Hong Kong, China, Oct. 2-6, 2005, pp [C28] B. Wang and G. Venkataramanan, Operation and control of a dynamic voltage restorer realized using cascaded H-bridge converters, in Proceedings of 36 th IEEE Power Electronics Specialists Conference, Recife, Brazil, Jun , 2005, pp [C29] G. Venkataramanan and B. Wang, Dynamic modeling and control of three phase pulse width modulated power converters using phasors, in Proceedings of 35 th IEEE Power Electronics Specialists Conference, Aachen, Germany, Jun , 2004, pp [C30] B. Wang and G. Venkataramanan, Evaluation of shunt and series power conditioning strategies for feeding sensitive loads, in Proceedings of 19 th Annual IEEE Applied Power Electronics Conference, Anaheim, CA, Feb , 2004, pp

6 Bingsen Wang 6 [C31] B. Wang and I. Hiskens, Review of AGC implementation issues before and after deregulation, in Proceedings of 35 th North American Power Symposium, Rolla, MO, Oct , 2003, pp Theses [T1] B. Wang, Flywheel based AC power conditioning system using a matrix converter, University of Wisconsin-Madison, Wisconsin, [T2] B. Wang, DSP-controlled, space-vector PWM, current source converter for STATCOM application, University of Kentucky, Kentucky, [T3] B. Wang, A new type of real-digital PWM inverter based on data storage in EPROM, Shanghai Jiao Tong University, Shanghai, China, [T4] B. Wang, PCB design for IGBT based synchronous motor drive, Shanghai Jiao Tong University, Shanghai, China, Selected Technical Reports [R1] Y. Song and B. Wang, High Voltage DC, conventional AC, and low frequency AC systems and their Applications, for ExxonMobil Upstream Research Company, Michigan, [R2] Y. Song and B. Wang, Fault mitigation and reliability improvement of power electronics in hybrid electric vehicles, for Science Applications International Corporation, Michigan, [R3] Y. Song and B. Wang, Reliability of HVDC systems in oil & gas applications, for ExxonMobil Upstream Research Company, Michigan, [R4] Y. Song and B. Wang, HVDC technology development study, for ExxonMobil Upstream Research Company, Michigan, [R5] B. Wang, Investigation of failure mechanisms of 100 mm SCR, General Electric Global Research Center, New York, [R6] T. A. Lipo and B. Wang, Efficiency modeling of four-level rectifier/inverter system based on high power SiC MOSFETs, for shipboard power distribution system, Wisconsin, [R7] B. Wang and G. Venkataramanan, Advanced motor controllers technology Phase I," for Boeing 787 aircraft motor drive project, Wisconsin, Selected Presentations [L1] B. Wang, shunt and series conditioning schemes for hybrid matrix converter, 42 nd Annual Conference of IEEE Industrial Electronics Society, Florence, Italy, Oct. 27, [L2] B. Wang, Hybrid matrix converter based on instantaneous reactive power theory, 41 st Annual Conference of IEEE Industrial Electronics Society, Yokohama, Japan, Nov. 12, [L3] B. Wang, Quantitative evaluation of the reliability of series HEV powertrain, 4 th International Conference on Power Engineering, Energy and Electric Drives, Istanbul, Turkey, May 16, [L4] B. Wang, Dynamics and stability of matrix-converter based permanent magnet wind turbine generator, 38 th Annual Conference of IEEE Industrial Electronics Society, Montreal, Canada, Oct. 28, [L5] B. Wang, Efficiency optimization of PMSM based drive system, 7 th International Power Electronics and Motion Control Conference, Harbin, China, Jun. 4, 2012.

7 Bingsen Wang 7 [L6] B. Wang, A photovoltaic power conversion system with a flat efficiency curve over a wide load range, 37 th Annual Conference of IEEE Industrial Electronics Society, Melbourne, Australia, Nov. 8, [L7] B. Wang, A series compensator based on ac-ac power converters with virtual quadrature modulation, 2 nd International Symposium on Power Electronics for Distributed Generation Systems, Hefei, China, Jun. 17, 2010 [L8] B. Wang, Interfacing solar energy to electric power grid, Arizona Workshop on Renewable Energy, Tempe, AZ, Nov. 17, 2008 (invited tutorial). [L9] B. Wang, AC-AC power conversion - starting from ideal switches, ASU Power and Energy System Graduate Seminar, Tempe, AZ, Feb. 15, [L10] B. Wang, Dynamic voltage restorer utilizing a matrix converter and flywheel energy storage, IEEE Industry Application Society 42 nd Annual General Meeting, New Orleans, LA, Sep. 24, [L11] B. Wang, Reliability analysis of high-power electric drives, Power Electronics Symposium, Schenectady, NY, Aug. 29, [L12] B. Wang, A carrier based PWM algorithm for indirect matrix converters, 37 th IEEE Power Electronics Specialists Conference, Jeju, Korea, June 22, [L13] B. Wang, AC power conditioning system using a matrix converter and flywheel, Wisconsin Electric Machine and Power Electronics Consortium 25 th Anniversary Meeting, Madison, WI, May 17, [L14] B. Wang, AGC implementation issues before and after deregulation, 35 th North American Power Symposium, Rolla, MO, Oct. 21, Professional Activities Editorship Editorial Board Member, International Journal of Power Electronics, since Associate Editor, IEEE Transactions on Power Electronics, since Associate Editor, special issue on Modeling and Advanced Control in Power Electronics,, IEEE Transactions on Power Electronics, Committee Membership Member of Awards Committee for the Industrial Drives Committee, a sub-committee of the IEEE Industry Application Society, since Member of Technical Committee on distributed generation and renewable energy systems, Power Electronics Society of IEEE, since Proposal Review Reviewer for University of Wisconsin-Milwaukee, Reviewer for Oak Ridge Associated Universities, Reviewer for Skolkovo Foundation in Russia, Reviewer and Panelist for NSF Energy, Power, and Adaptive Systems merit review panel, 2011.

8 Bingsen Wang 8 Reviewer for ARPA-E Agile Delivery of Electrical Power Technology concept papers, Reviewer and Panelist for NSF Power, Control, and Adaptive Networks merit review panel, Journal Review IEEE Industry Applications Magazine IEEE Transactions on Industry Applications IEEE Transactions on Industrial Electronics IEEE Transactions on Informatics IEEE Transactions on Magnetics IEEE Transactions on Power Delivery IEEE Transactions on Power Electronics IEEE Transactions on Sustainable Energy IEEE Transactions on Vehicular Technology Journal of Power Electronics, by Korean Institute of Power Electronics Conference Organization Session Chair for Power Converter Topologies and Control, 42 nd Annual Conference of the IEEE Industrial Electronics Society, Florence, Italy, Oct , Session Chair for Electric Vehicles, 4 th International Conference on Power Engineering, Energy and Electric Drives, Istanbul, Turkey, May 13-17, Technical Program Committee Member, ECCE2013, 5 th IEEE Energy Conversion Congress and Exposition, Denver, CO, Sept , Session Chair for Multilevel Converters- 1, 38 th Annual Conference of the IEEE Industrial Electronics Society, Montreal, Canada, Oct , Session Chair for Multilevel Converter VII: Control, 4 th IEEE Energy Conversion Congress and Exposition, Raleigh, NC, Sept , Session Chair for Renewable Energy System Analysis and Control II, 4 th IEEE Energy Conversion Congress and Exposition, Raleigh, NC, Sept , Session Chair for Multilevel Converters I: General Topologies, 4 th IEEE Energy Conversion Congress and Exposition, Raleigh, NC, Sept , Session Chair for Modeling and Analysis of Power Converters, 7 th International Power Electronics and Motion Control Conference, Harbin, China, Jun. 2-5, Fiance Chair, IEEE 3 rd Energy Conversion Conference and Expo, Phoenix, AZ, Sept , Topic Chair for DC-AC Inverters, IEEE 2 nd Energy Conversion Conference and Expo, Atlanta, GA, Sept , Topic Chair for AC-AC Converters, IEEE 2 nd Energy Conversion Conference and Expo, Atlanta, GA, Sept , 2010.

9 Bingsen Wang 9 Session Chair for DC-AC Inverters: Inverter Control and Analysis I, IEEE 2 nd Energy Conversion Conference and Expo, Atlanta, GA, Sept , Session Chair for the session of Power semiconductor devices and high efficient conversion, PEDG2010, 2 nd International Symposium on Power Electronics for Distributed Generation Systems, City of Hefei, China, Jun , Technical Program Committee Member, PEDG2010, 2 nd International Symposium on Power Electronics for Distributed Generation Systems, City of Hefei, China, Jun , Session Chair for the session of PWM and control techniques, IAS08, 43 rd Annual Meeting of the IEEE Industry Application Society, Edmonton, Canada, Oct. 5-9, Session Organizer for the session of AC-AC and current source converters, IAS08, 43 rd Annual Meeting of the IEEE Industry Application Society, Edmonton, Canada, Oct. 5-9, Session Organizer for the session of AC-AC and current source converters, IAS08, 43 rd Annual Meeting of the IEEE Industry Application Society, Edmonton, Canada, Oct. 5-9, Technical Program Committee Member, APEC07, 22 nd IEEE Applied Power Electronics Conference, Anaheim, CA, Feb. 25-Mar. 1, Technical Program Committee Member, APEC06, 21 st IEEE Applied Power Electronics Conference, Dallas, TX, Feb , Technical Program Committee Member, APEC04, 19 th IEEE Applied Power Electronics Conference, Anaheim, CA, Feb , Conference Review APEC10 25 th IEEE Applied Power Electronics Conference, Palm Springs, CA, Feb , APEC07 22 nd IEEE Applied Power Electronics Conference, Anaheim, CA, Feb. 25-Mar. 1, APEC06 21 st IEEE Applied Power Electronics Conference, Dallas, TX, Feb , APEC04 19 th IEEE Applied Power Electronics Conference, Anaheim, CA, Feb , ECCE13 5 th IEEE Energy Conversion Congress and Exposition, Denver, CO, Sept , IAS08 43 rd Annual Meeting of the IEEE Industry Application Society, Edmonton, Canada, Oct. 5-9, IAS05 40 th Annual Meeting of the IEEE Industry Application Society, Hong Kong, China, Oct. 2-6, IECON07 33 rd Annual Conference of the IEEE Industrial Electronics Society, Taipei, Taiwan, Nov. 5-8, IECON06 32 nd Annual Conference of the IEEE Industrial Electronics Society, Paris, France, Nov. 7-10, ISIE07 IEEE International Symposium on Industrial Electronics, Vigo, Spain, Jun. 4-7, PESC08 39 th IEEE Power Electronics Specialists Conference, Rhodes, Greece, Jun , PESC05 36 th IEEE Power Electronics Specialists Conference, Recife, Brazil, Jun , PESC04 35 th IEEE Power Electronics Specialists Conference, Aachen, Germany, Jun , 2004.

10 Bingsen Wang 10 Professional Memberships Senior Member of IEEE Full Member of Sigma Xi Member of Power Electronics Society, IEEE Member of Industry Application Society, IEEE Member of Industrial Electronics, IEEE Honors and Distinctions Best Session Presentation, Annual Conference of the IEEE Industrial Electronics Society, Elevated to Senior Member, IEEE, 2008 Third Prize Paper Award, IEEE IAS Industrial Power Converters Committee, Latest update: 4/2017