Biditup Auctions Worldwide, Inc./Maynards Industries

Transcription

1 Biditup Auctions Worldwide, Inc./Maynards Industries Goltra Castings Company - Complete Small Steel 8 Oz 200lb Castings Foundry Foundry equipment, Panghorn, Palmer, Royer, Ovens, Steer loader, Forklifts, Cranes, Inspection/Lab equipment and general plant support equipment! 501 McIntyre Street Golden Colorado United States Starts Jun 28, am MDT Lot Description 1 Poly Banding Cart with Tools and Clips 2 Oxygen/Acetylene Torch with Gages, Hose and Cart 3 Lot-(1) 4-Wheel Drum Cart and 2-Wheel Tow Dolly 4 SAN BLAST Portable Vertical Sand Blast Tank with Hose and Nozzle 5 PALMER Airless Sprayer, Portable 6 ARO Airless Sprayer, Portable 7 HUSKY PRO 12-Drawer Tool Box with Cart, (Hydraulic Pump Not Included) 7A Lot-Hydraulic Floor Jack, Bottle Jack, Jack Stand and 4-Wheel Dolly 8 STANLEY 5-Drawer Rolling Tool Box, (Hydraulic Pump Not Included) 9 GRIP 4-Ton Hydraulic Pump with Dayton Hydraulic Pump 10 Lot-(9) Bar Clamps 11 Lot-Asst'd Hand Tools and Misc. on (2) Shelves 12 Lot-Screwdrivers and Nut Drivers in (2) Boxes 13 Lot-Scrapers, Scissors, Knives and Blow Off Tools in (2) Boxes 14 Lot-Machine Maintenance Parts in (2) Boxes 15 Lot-Sanding Belts and Kalamazoo Sander Parts in (2) Boxes

2 16 Lot-Bolt Cutter, Crimper, Rivet Tool and Tubing Bender in (1) Box 17 Lot-Allen Wrenches and T-Handle Allen Wrenches in (2) Boxes 18 Lot-Punches and Chisels in (1) Box 19 Lot-Straight Shank Drill Bits in (1) Box 20 Lot-Hammer Drill Bits and Large Drills in (1) Box 21 Lot-Sanding and Grinding in (2) Boxes 22 Lot-Manual Shear and (2) Crimpers in (1) Box 23 Lot-Shears, Pliers, etc. in (1) Box 24 Lot-Hole Saws in (1) Box 25 Lot-Tubing Flare Tools in (1) Box and Air Hose Tool Kit 26 Tapping Set, (Partial) 27 Lot-Abrasive Cutoff Blades 28 Lot-De-Burring in (1) Box 29 Lot-Taps and Dies in (2) Boxes 30 Lot-Welding Tools and Spray Paint Guns in (2) Boxes 31 Lot-Hand Stamp Sets in (1) Box 32 Lot-Hand Stamp Sets in (1) Box 33 Lot-Hand Stamp Sets in (1) Box 34 Lot-Loose Hand Stamps in (1) Box 35 Lot-Asst'd Hammers, Sledge Hammers, Pick and Pry Bars 36 Lot-Pipe Bending Tools 37 Lot-Air Hose and V-Belts

3 38 Lot-Lights, Extension Cords and Wire 39 Lot-Side Grinder Guards 40 Lot-(3) Electrical Fish Tapes 41 Lot-Personal Protection Supplies 42 3/4-Drive Socket Set with Case 43 Lot-1/2'' Drive Sockets in (1) Box 44 Lot-3/8'' Drive Sockets in (1) Box 45 Lot-1/4'' Drive Sockets in (1) Box 46 Lot-Large Wrenches in (1) Row 47 Lot-Wrenches in (1) Box 48 Lot-Custom Wrenches, Vise Grips and Adjustable Wrenches in (1) Box 49 Pneumatic Chisel Gun 50 Lot-(2) Pneumatic Drills and (1) Pneumatic Chisel Gun in (1) Box 51 Lot-(4) Pneumatic Straight Grinders 52 Lot-(8) Pneumatic Straight Die Grinders in (1) Box 53 Lot-(3) Pneumatic Angle Grinders 54 Lot-DeWALT DC930, 14.4 Volt 1/2'' Cordless Drill with (6) Batteries and (3) Chargers 55 Lot-(1) RIDGID, (1) DeWALT and (1) MILWAUKEE Electric Drills 56 Lot-(1) Craftsman and (1) Milwaukee Electric Drills 57 Lot-(1) SKILSAW and (1) RIDGID 7 1/4'' Electric Circular Saws 58 Lot-(1) MILWAUKEE , 4 1/2'' and (1) MAKITA GA7021 7'' Electric Angle Grinders 59 RYOBI HG500 Electric Heat Gun with Case

4 60 4-Drawer Service Cabinet with Letter Stamp Contents 61 Lot-Asst'd Lube Products 62 Lot-Safety Helmets, Respirator Hood and Shields 63 Lot-Safety Helmets with Shields 64 Lot-(3) Pairs Deep Throat Welding Type Vise Grips 65 Lot-(8) Pairs Welding Type Vise Grips 66 Lot-(7) Pairs Welding Type Vise Grips 67 Lot-(13) C-Clamps and (1) Bar Clamp 68 Lot-Pipe Threader and (2) Pipe Cutters 69 Lot-(1) MAX POWER 18'' and (1) RIDGE 24'' Pipe Wrenches 70 RIDGID 36'' Pipe Wrench 71 RIDGID 48'' Pipe Wrench 72 NO NAME Chain Type Pipe Wrench 73 Lot-OxygeN/Acetylene Torch with Hose and Gauges 74 Lot-Asst'd OxygeN/Acetylene Torches and Tips in (1) Box with (1) Propane Pre-Heat Torch 75 Lot-Thermal Dynamics Torch Parts, etc. in (1) Box 76 Lot-14'' Stick Welding Rods 77 Lot-Welding Wire and Tig Rods 78 Lot-Ratcheting Chain Hoist, Chain Binder and Hooks 79 DAYTON MODEL 4VV66, Gasoline Powered 2'' Pump, with ROBIN SUBARU 6-HP Motor 80 Portable Propane Heater 81 MAKITA AVT HM1214C, Electric Jack Hammer with Bits and Case

5 82 HILTI TE 905-AVR, Electric Jack Hammer with Case 83 RIDGID 14'' Abrasive Cutoff Saw with Blades 84 Lot-Com-A-Longs, Bottle Jack, Cement Tools, Chains, Ratchet Straps, Spray Gun, Boots and Fuel Cans on/under (1) Bench 85 Lot-Hardware and Misc. on Bench Top 86 Lot-Long Handle Tools, Post Hole Diggers, Shovels, etc. 87 Lot-(3) Asst'd Benches and (1) Steel Stand 88 Lot-Steel Shelving Bench and (1) Steel Stand, (Contents Not Included, Not to Be Removed Until Empty) 89 Lot-Steel Shelving Bench and (3) Baker's Racks, (Contents Not Included, Not to Be Removed Until Empty) 90 Steel Shelving Rack, (Contents Not Included, Not to Be Removed Until Empty) 91 Lot-(2) Steel Tub Carts 92 Lot-(1) 12', (1) 8' and (1) 4' Fiberglass Step Ladders 93 Lot-Hose on (1) Pallet 94 Lot-(3) Flat Carts 95 Lot-(4) Flat Carts 96 Lot-(4) Flat Carts 97 Lot-(4) Steel Stands 98 CHART MODEL M4494 DURA-CYL Argon Tank, Approx. 60-Gallon, S/N , with Cylinder Cart 99 40'' Drum Fan, Portable 100 Lot-(3) Pedestal Shop Fans 101 Lot-(3) Pedestal Shop Fans 102 Lot-Cardboard in (2) Stacks 103 Lot-(5) Portable Baker's Racks with Trays

6 104 Lot-(5) Steel Carts 105 Lot-(6) Steel Carts 106 Lot-(6) Steel Carts '' W x 24'' D x 72'' H Section Racking 108 Open 109 Open 110 Open 111 KALAMAZOO 2'' Horizontal Belt Sander, Baldor 1/2-HP 3,450 RPM Motor, Steel stand 112 KALAMAZOO 2'' Horizontal Belt Sander, Baldor 1/2-HP 3,450 RPM Motor, Steel stand 113 SEARS CRAFTSMAN 10'' Radial Arm Saw, Portable 113A DAYTON MODEL 4YG30A, 7'' x 12'' Horizontal Metal Cutting Band Saw, S/N N/A, 1-HP, 1,725 RPM Motor 113B NO IDENTIFYING NAME H-Frame Shop Press with HUSKY 20-Ton Hydraulic Bottle Jack 114 GRINDING & POLISHING MACHINERY CORP. MODEL SS-1500, 3'' Wide x 132'' Long Double End Sanding & Buffing Jack, S/N G- 8265, 15-HP x 1,750 RPM 115 CINCINNATI TYPE , MODEL 107, 12'' X 3-HP Double End Pedestal Type Grinder, S/N NO IDENTIFYING NAME 12'' x Approx. 3-HP Double End Pedestal Type Grinder, S/N N/A 117 DELTA MILWAUKEE 14'' Vertical Contour Wood Cutting Band Saw, S/N DELTA CAT NO , 17'' Floor Standing Drill Press, S/N , 12 1/2'' x 17'' Work Surface 119 KING-SEELEY CRAFTSMAN 14'' Floor Standing Drill Press, S/N N/A THERMAL DYNAMICS MODEL PAK 200, Plasma Cutting and Gouging System, S/N JP , with Leads 121 MILLER ELECTRIC MODEL SYNCROWAVE 250 DX Tig Welder, S/N MD , with Leads and Foot Pedal, Portable 122 MILLER MODEL SRH-444, 400-Amps Capacity, DC Arc Welding Power Source, with Leads 123 HOBART MODEL 4030, 400-Amps Capacity CV DC Mig Welder, S/N 294WS33226, with HOBART 2410 Wire feed Unit and Leads, Portable

7 124 LINCOLN MODEL IDEALARC 250, 250-Amps Capacity CC AC/DC Arc Welder, S/N AC , with Leads, Portable 125 PHOENIX MODEL T8C, Dry Rod Oven, Degrees, 1,000 Watts, with Stand 126 CINCINNATI MODEL SPL, TYPE , 30'' Snag Grinder, S/N , 25-HP, 1,800 RPM, 1,590-2,655 Spindle RPM 127 CINCINNATI MODEL SPL, TYPE , 30'' Snag Grinder, S/N , 25-HP, 1,800 RPM, 1,590-2,655 Spindle RPM 128 CINCINNATI MODEL SPL, TYPE , 30'' Snag Grinder, S/N , 25-HP, 1,800 RPM, 1,590-2,655 Spindle RPM 129 CINCINNATI MODEL SPL, TYPE , 30'' Snag Grinder, S/N , 25-HP, 1,800 RPM, 1,590-2,655 Spindle RPM 130 CINCINNATI MODEL SPL, TYPE , 30'' Snag Grinder, S/N , 25-HP, 1,799 RPM, 1,590-2,655 Spindle RPM 131 CINCINNATI MODEL SPL, TYPE , 30'' Snag Grinder, S/N , 25-HP, 1,800 RPM, 1,590-2,655 Spindle RPM 131A 30'' x 2'' x 12'' Grinding Wheel with Steel Table 132 MAX MFG. MODEL 6A020H, 20'' Swing Combination Abrasive Cutoff Saw, S/N 719, 10-HP x 3,535 RPM Motor 133 (2) 20'' Abrasive Cut-Off Saws, 15-HP Motors, with Common Cabinet Base and Material Chute 134 PANGBORN MODEL 15 GN Rotary Shot Blast Machine with Floor Loading Bucket, Belt Driven Shot Wheel, Shot Return System with Media Recovery, S/N 15GN CONVEYOR DYNAMICS MODEL CDC 36X15C, 36'' x 15' Vibratory Conveyor, S/N '' x 10' Motorized Inclined Belt Conveyor 137 PANGBORN MODEL 12 GN Rotary Barrel Shot Blast Machine, S/N N/A, Shot Return System with Media Recovery AJAX MAGNETHERMIC CORP. 750-KW, Induction Melting Furnace with (3) 1500-Lbs. Boxes, S/N M AB, 11,600 KVA x 1,250-Volts x 9,280-Amps Output, with Spare Capacitors, Thermocouples and Collapsible Forms 139 APPLICATION ENGINEERING MODEL PT-350, Furnace Cooling Recirculating System, S/N 85M089, with (1) Closed Loop 15-HP Pump System and Tank, (1) Cooling System 20-HP Pump System with Tank and Cooling Tower (Outside) with Stand and Heat Exchanger 140 Natural Gas Ladle Torch with Electric Blower and (2) Shanks 141 Lot-(4) Spare Shanks AJAX MAGNETHERMIC CORP. 750 KW (Tuned Down to 500 KW) Induction Melting Furnace with (3) 1000-Lbs. Boxes, S/N MK2H350-A, 11,600 KVA x 1,250 Volts x 9,280 Amps Output

8 143 NO IDENTIFYING NAME Furnace Cooling Recirculating System, MUELLER ACCU-THERM and TRANTER SUPERCHANGER Heat Exchangers, MARLEY Cooling Tower, S/N's N/A, with Spare Pump Motor 144 Natural Gas Ladle Torch with Electric Blower and (2) Shanks 145 INDUCTO MODEL 500, 750-Lbs. Capacity Melt Box, S/N 68L A NO IDENTIFYING NAME 100-Lbs. Capacity Melt Box, S/N N/A 146 Spare Reactor for Induction Power Cabinet 147 MODERN EQUIPMENT 600-Lbs. Capacity Mechanical Hand Crank Pouring Ladle Crane Attachment 148 Lot-(2) Replacement Shells for Foseco 149 Lot-200-Lb. Ladle Shells on (1) Pallet 149A Lot-100-Lb. Ladle Shells on (1) Pallet 149B Furnace Torch 149C Furnace Torch 150 HARRISON MODEL 1420AF, 14'' x 20'' Capacity Automatic Twin Matic Hydraulic Green Sand Molding Machine, S/N 103-AF, with (2) 10'' x 17' Motorized Discharge Belt Conveyors and (2) 8'' x 42' Run Out Roller Conveyors 151 HARRISON MODEL 1824AF, 16'' x 20'' Capacity (Resized), Automatic Twin-Matic Green Sand Molding Machine, S/N 120AF, with (2) 12'' x 10' Motorized Discharge Belt Conveyors, and (1) 12'' x 38' and (1) 12'' 51' Run Out Roller Conveyors 152 HARRISON 10'' x 16'' Capacity Dual Shell Pneumatic Core Machine, S/N N/A, Analog Controls 153 HARRISON 10'' x 16'' Capacity Dual Shell Pneumatic Core Machine, S/N N/A, PLC Controls, with Partial Container of Sand on (1) Pallet 153A DEPENDABLE MODEL 200, Semi-Automatic Electric, Pneumatic and Gas Operated Single End Core Machine, S/N N/A 153B DEPENDABLE MODEL 200, Semi-Automatic Electric, Pneumatic and Gas Operated Single End Core Machine, S/N N/A, (Not in Service) 154 SHELCO-HUTCHINSON 15'' x 20'' Capacity Automatic Electric and Pneumatic Shell Molding Machine, with SHELL PROCESS Mold Press and Sand Stand with Sand Contents 155 SHELCO-HUTCHINSON MODEL 2030SMM, 20'' x 30'' Capacity Automatic Electric and Pneumatic Shell Molding Machine, S/N 9179, with SHELL PROCESS MODEL 1520SP Mold Press, S/N 2437, Sand Stand with Sand Contents and Exhaust Hood 156 SHELCO-HUTCHINSON 14'' x 20'' Capacity Automatic Electric and Pneumatic Shell Molding Machine, with SHELL PROCESS Mold Press, S/N SBM2, Sand Stand with Sand Contents and Exhaust Hood

9 157 MILWAUKEE MODEL 161-1, Jolt Squeeze Green Sand Molding Machine, S/N 14688, 24'' x 30'' Table Size 158 MILWAUKEE Jolt Squeeze Green Sand Molding Machine, S/N 18030, 24'' x 30'' Table Size 158A Pneumatic Impact Table 159 Lot-ALLIED MINERAL TYPE Z73W Ramming Material, (1,375 Lbs.), on (1) Pallet 160 Lot-Large 44-Lb. Weights on (1) Pallet 161 Lot-Small 20-Lb. Weights on (1) Pallet 162 Lot-14'' x 24'' Bottom Plates on (1) Pallet 163 Lot-14'' x 20'' Bottom Plates - Automatic with Asst'd Other Sizes on (1) Pallet 164 Lot-14'' x 20'' Bottom Plates on (1) Pallet 165 Lot-18'' x 18'' Bottom Plates on (1) Pallet 166 Lot-13.5'' x 18'' Bottom Plates on (1) Pallet 167 Lot-13.5'' x 18'' Bottom Plates on (1) Pallet 168 Lot-15.5'' x 15.5'' Bottom Plates on (1) Pallet 169 Lot-13.5'' x 15.5'' Bottom Plates on (1) Pallet 170 Lot-13.5'' x 15.5'' Bottom Plates on (1) Pallet 171 Lot-16'' x 20'' Squeeze Plates - Automatic with Asst'd Other Sizes on (2) Pallets 172 Lot-(7) 14'' x 24'' Steel Jackets on (1) Pallet 173 Lot-(5) 18'' x 18'' and (1) 20'' x 20'' Steel Jackets on (1) Pallet 174 Lot-(6) 14'' x 20'' and (4) 14'' x 16'' Steel Jackets on (1) Pallet 175 Lot-(5) 14'' x 20'' and (5) 16'' x 16'' Steel Jackets on (1) Pallet 176 Lot-(6) 14'' x 20'' Steel Jackets on (1) Pallet 177 Lot-(6) 14'' x 20'' Steel Jackets on (1) Pallet

10 178 Lot-(10) 14'' x 20'' Steel Jackets on (1) Pallet 179 Lot-(5) 14'' x 18'' Steel Jackets on (1) Pallet 180 Lot-(8) 16'' x 16'' Steel Jackets on (1) Pallet 181 Lot-(6) 14'' x 16'' Steel Jackets on (1) Pallet 182 Lot-(8) Aluminum Snap Flasks on (1) Pallet 183 Lot-(6) Aluminum Snap Flasks on (1) Pallet 184 Lot-(4) Aluminum Snap Flasks on (1) Pallet 185 Lot-(3) Aluminum Snap Flasks on (1) Pallet '' x 30'' Aluminum Snap Flask on (1) Pallet 187 Open 188 Open 189 Open 190 PALMER MODEL M200XL, 200-Lbs. Capacityu High Speed Continuous Electric Air Set Mixer, S/N M4172, Swivel Head, with (1) Drum Alpha Cure 191 PALMER 100-Lbs. Capacity High Speed Continuous Electric Air Set Mixer, S/N N/A, Fixed Head, with (1) Drum Alpha Cure 192 NO IDENTIFYING NAME 30'' x 36'' Vibrating Table '' x 11' x 20' Oval Roller Conveyor Loop with 24'' x 9' Straight Roller Conveyor '' x 18'' Vertical Electric Sand Elevator with (2) Hoppers and Sand Stand with Sand Contents 195 PALMER MODEL M50XL, 50-Lbs. Capacity Electric Air Set Mixer, S/N M1598XL, with Sand Stand and Sand Contents, Steel Bench and Drum of Novaset Binder '' x 9' Diameter Roller Conveyor Loop 197 SHELCO Hydraulic Motorized Loop Type Conveyor Type Mold Pouring Cooling Oven, S/N N/A, 23'' x 70'' Conveyor Trays with Contents and Risidual, with (2) Drums Hydraulic Oil and (1) Drum Isopropyl Alcohol 198 NO IDENTIFYING NAME Gas Fired Heat Treat Oven, 2,100-Degrees Capacity, Honeywell Controls, 5' W x 6' H x 10' D, Ceramic Blanket Lined, with Electric Conveyor Pull Type Rail Car, Heat Treat Table Pattern, Spare Heat Treat Car, with CURTIS Horizontal Tank Mounted Air Compressor

11 199 NO IDENTIFYING NAME 4-Burner, Gas Fired Box Furnace, 53'' Wide x 45'' High Opening, Vertical Electric Up-Acting Single Door, S/N N/A, Brick Lined 200 PALMER MODEL CAR-3, Vibratory Bowl Reclaimer, S/N CAR-013, 72'' Diameter Outer Opening, 48'' Diameter Inner Bowl, with 24'' x 10' Motorized Inclined Discharge Conveyor 201 CARVER MODEL 3GF, 800-Lbs. Capacity Electric Mixer for Facing Sand, with Sand Contents 202 SIMSON Electric Mixer for Back-Up Sand with Contents 203 A. O. SMITH 100-Ton Capacity Glass Lined Sand Feed Hopper with Electric Vibra-Screw Base, with Sand Contents 204 DESPATCH 4-Tier Gas Heated Core Oven with Exhaust and Blowers, Single Monorail Drawer Opener KLINE MODEL PF-100/15 Pneumatic Sand Transporter, with Approx. 4'' Discharge Pipe, 100-Ton Capacity Glass Lined Holding Tank, with Sand Contents 206 CARVER MODEL 1GF, 100-Lbs. Capacity Vertical Electric Mixer for Ladle Sand Lbs. Capacity Vertical Electric Mixer for Ladle Sand '' x 45'' Shake Out Box '' x Approx. 40' Motorized Incline Belt Conveyor 210 ROYER Electric Sand Crusher with Contents, Approx. 25-HP Motor 211 ROYER 18'' x 24'' Approx. 40' High vertical Electric Sand Elevator 212 STATES ENGINEERING 24'' x 10' Belt Conveyor 213 ROCKY MOUNTAIN CONVEYOR & EQUIPMENT (RMCE) 24'' Approx. 25' Motorized Cleated Belt Incline Conveyor 214 (3) Stainless Steel and (1) Steel Approx. 1,200-Lbs. Capacity Feed Hoppers with Contents, with 30' Electric Horizontal Overhead Sand Conveyor 215 STATES ENGINEERING 24'' x Approx. 25' Incline Conveyor with (1) 1,200-Lbs. Capacity Stainless Steel and (1) Steel 1,200-Lbs. Capacity Hoppers with Contents, Horizontal Feed Conveyor '' x 50' Roller Conveyor '' x 50' Roller Conveyor '' x 47' Roller Conveyor

12 219 12'' x 47' Roller Conveyor 220 TORIT DOWNFLO MODEL DF-T4-80, 80-Filter Dust Collector, S/N TG , 60-HP Motor, with Vertical Surge Tank and Ductwork 221 TORIT DONALDSON MODEL DF-4-48, 48-Filter Dust Collector, S/N TG , 30-HP Motor, with Vertical Surge Tank and Ductwork 222 TORIT DONALDSON MODEL DF-4-48, 48-Filter Dust Collector, S/N N/A, 30-HP Motor, with Vertical Surge Tank and Ductwork 223 NO IDENTIFYING NAME Material Silo with Vertical Sand Elevator 224 PANGBORN Shaker Type Bag House Dust Collector, S/N N/A 225 SULLAIR MODEL VCC-200S-150H/A, 150-HP Rotary Screw Air Compressor, S/N , 125/135 PSIG 226 SULLAIR MODEL 7509V/A, 7500 II S-ENERGY, 100-HP Rotary Screw Air Compressor, S/N , Variable Speed Drive 227 Horizontal Air Receiver Holding Tank 227A Horizontal Air Receiver Holding Tank 227B Vertical Air Receiver Holding Tank 228 Lot-(1) MILWAUKEE Molding Machine, (Not in Service) 229 Stack Molding Press 230 Lot-CF8M Material for Re-Melt in (1) Tub, (906-Lbs.) 231 Lot-Zirconium Oil Sand in (1) Drum 232 Lot-Zirconium Shell Core Sand in (1) Drum 233 Lot-M35 Material for Re-Melt in (1) Tub, (1,870-Lbs.) 234 Lot-CA6NM Material for Re-Melt in (1) Tub, (459-Lbs.) 235 Lot-NOD5 Ferro Maganese Silicon in (1) Tub, (1,471-Lbs.) 236 Lot-CD3MN Material for Re-Melt in (1) Tub, (1,375-Lbs.) 237 Lot-N12MD Material for Re-Melt in (2) Drums on (1) Pallet, (903-Lbs.) 238 Lot-316 Ingot Material for Re-Melt in (2) Drums on (1) Pallet, (1,490-Lbs.)

13 239 Lot-316 Ingot Material for Re-Melt in (2) Drums on (1) Pallet, (3,472-Lbs.) 240 Lot-N12MD Material for Re-Melt in (1) Drum on (1) Pallet, (1,266-Lbs.) 241 Lot-CW12MW (139-Lbs.) and CD4M (100-Lbs.) Material for Re-Melt on (1) Pallet 242 Lot-CN7M Material for Re-Melt in (1) Crate, (2) Drums and (1) Tub, (4,052-Lbs.) 243 Lot-CK20 Material for Re-Melt in (1) Tub, (977-Lbs.) 244 Lot-CW12MW Material for Re-Melt in (2) Drums and (1) Tub, (1,350-Lbs.) 245 Lot-CD4MCU Material for Re-Melt in (1) Tub, (3,102-Lbs.) 246 Lot-CN7M Material for Re-Melt in (1) Tub, (3,346-Lbs.) 247 Lot-HK40 Material for Re-Melt in (1) Tub, (2,305-Lbs.) 248 Lot-174PH Material for Re-Melt in (1) Drum, (627-Lbs.) 249 Lot-304 Stainless Steel for Re-Melt in (1) Drum, (292-Lbs.) 250 Lot-N7M Material for Re-Melt in (1) Drum, (568-Lbs.) 251 Lot-CK3MCUN Material for Re-Melt in (1) Drum, (298-Lbs.) 252 Lot-CX2MW Material for Re-Melt in (1) Drum, (409-Lbs.) 253 Lot-CW6M6 Material for Re-Melt in (1) Tub, (1,824-Lbs.) 254 Lot-CZ100 Material for Re-Melt in (1) Tub, (1,751-Lbs.) 255 Lot-CD3MWCUN Material for Re-Melt in (1) Tub, (886-Lbs.) 256 Lot-M3OC Material for Re-Melt in (1) Tub, (517-Lbs.) 257 Lot-CY40 Material for Re-Melt in (1) Tub, (1,651-Lbs.) 258 Lot-CF8M Material for Re-Melt in (3) Drums, (2,193-Lbs.) 259 Lot-CF8M Material for Re-Melt in (1) Tub, (1) Drum and (1) Pallet, (3,145-Lbs.) 260 Lot-Repair Parts and Misc. on (4) Sections Shelving

14 261 Lot-(4) Sections Shelving, (Contents Not Included) 262 Lot-Repair Parts, Misc., Shelving, Cabinets and Bench Along (1) Wall 263 Lot-(1) Drum 6018 Coreactor and (1) Drum Novaset HP Binder on (1) Pallet 264 Lot-CASI Alloys in (1) Drum, (294-Lbs.) 265 Lot-1 1/2 % Shell Core Sand in (1) Drum 266 Lot-2 x 6 Pouring Cups with Fillers on (1) Pallet 267 Lot-Taconite Alloy in (1) Drum, (495-Lbs.) 268 Lot-Nickle Alloy Pellets in (1) Drum, (300-Lbs.) 269 Lot-Aluminum Chopped Wire in (1) Drum 270 Lot-(1) Drum Ferro Moly, (161-Lbs.) and (1) Drum Ferro Titanium, (286-Lbs.) on (1) Pallet 271 Lot-3'' x 12'' Riser Sleeves on (1) Pallet 272 Lot-Ferro Maganese on (1) Pallet, (1,017-Lbs.) 273 Lot-Ferro Silica on (1) Pallet, (350-Lbs.) 274 Lot-(4) Pails LVD Liquid Paste on (1) Pallet, (212-Lbs.) 275 Lot-Ferro Chrome Alloy on (1) Pallet, (550-Lb.) 276 Lot-Graphidox in (1) Drum, (411-Lbs.) 277 Lot-Ferro Maganese in (1) Drum, (450-Lbs.) 278 Lot-316 Non-Magnetic Material for Re-Melt in (1) Drum, (750-Lbs.) 279 Lot-316 Non-Magnetic Material for Re-Melt in (1) Drum, (534-Lbs.) 280 Lot-Mixed Alloys and Temp Temps on (1) Pallet 281 Lot-Volclay Bentonite on (2) Pallets, (4,950-Lbs.) 282 Lot-3'' Sleeves, No Breaker, on (1) Pallet, (479-Pieces)

15 283 Lot-5'' x 12'' Straight Sleeves on (1) Pallet, (15-Pieces) 284 Lot-1 1/2'' Sleeves, No Breaker on (1) Pallet, (1,043-Pieces) 285 Lot-Mystery Alloy in (3) Drums on (1) Pallet 286 Lot-Aluminum De-Ox Shot in (1) Drum, (500-Lbs.) 287 Lot-Joymark Hot Top in (1) Drum, (160-Lbs.) 288 Lot-2'' x 4'' Pouring Cups on (1) Pallet, (443-Pieces) 289 Lot-3 1/2'' Sleeves, No Breakers on (1) Pallet, (304-Pieces) 290 Lot-2'' Sleeves, No Breakers on (1) Pallet, (119-Pieces) 291 Lot-520 Silica Sand on (2) Pallets, (7,000-Lbs.) 292 Lot-3'' Joymark Pouring Cups with Carbon Filters on (2) Pallets, (616-Pieces) 293 Lot-4'' Sleeves, No Breakers on (1) Pallet, (28-Pieces) 294 Lot-5'' x 8'' Pouring Cups on (1) Pallet, (18-Pieces_ 295 Lot-Pearl Top on (1) Pallet, (920-Lbs.) 296 Lot-10'' x 5'' x 12'' Neckdown Sleeves on (1) Pallet, (22-Pieces) 297 Lot-Ferro Silicon Alloy on (1) Pallet, (3,000-Lbs.) 298 Lot-Taconite Alloy Pellets on (1) Pallet, (2,420-Lbs.) 299 Lot-4'' x 12'' Riser Sleeves on (1) Pallet, (7-Pieces) 300 Lot-2 1/2'' Sleeves, No Breaker, (276-Pieces) and 2 1/2'' Sleeves with Breakers, (200-Pieces) on (1) Pallet 301 Lot-3 1/2'' Sleeves with Breakers, (162-Pieces) 302 Lot-600-Lb. Foseco Ladle Liners on (1) Pallet, (4-Pieces) 303 Lot-3'' Sleeves with Breakers on (1) Pallet, (700-Pieces) 304 Lot-Red Furnace Grot on (1) Pallet, (225-Lbs.)

16 305 Lot-Ceramic Fiber 2'' Blanket on (1) Pallet 306 Lot-Desoco Carbon on (1) Pallet, (200-Lbs.) 307 Lot-(8) Sections Pallet Racking, (Contents Not Incuded), (Not to Be Removed Until Empty) 308 Open 309 Open 310 Open 311 BOBCAT MODEL S130 Skidsteer Loader, S/N AU4Y11158, Diesel Engine, 1/4-Yard Bucket, 1,102 Hours, (Delayed Removal Until ) 312 CASE MODEL 1840 Skidsteer Uni-Loader, S/N JAF , Diesel Engine, 1/4-Yard Bucket, 7,019 Hours 313 HYSTER MODEL H60FT, 5,700-Lbs. x 164.2'' Height Capacity, LP Gas fork Lift Truck, S/N L177V06094J, Rotator, Side Shift, 48'' Forks, 5,296 Hours, (LP Tank Not Included) 314 HYSTER MODEL H60FT, 5,700-Lbs. x 164.2'' Height Capacity, LP Gas fork Lift Truck, S/N L177V06972J, Side Shift, 48'' Forks, 5,342 Hours, (LP Tank Not Included), (Delayed Removal Until ) Ton Capacity Single Girder Top Running Traveling Overhead Bridge Crane, Approx. 16' Span, with COFFING 2-Ton Electric Hoist, 4- Way Pendant Controlled, with Runway Rails, Approx. 40' Long 316 CLEVELAND TRAMRAIL 2-Ton Capacity Single Girder Bottom Running Traveling Overhead Bridge Crane, Approx. 15' Span, with Polaris 2-Ton Electric Hoist, 2-Way Pendant Controlled, with Runway Rails, Approx. 35' Long 317 Lot-(2) SPANCO 2,000-Lbs. Capacity Single Girder Bottom Running Traveling Overhead Bridge Cranes, Approx. 30' Span, with HARRINGTON 1-Ton Electric Hoist, 4-Way Pendant Controlled, with Runway Rails, Approx. 60' Long 318 Single Girder Bridge Crane Rail, Approx. 30' Span, and Runway Rails, Approx. 50' Long, (Dead Leg Attachment Not Included) Degree Post Mounted Jib Arm, Approx. 15' Span, with DAYTON 1,000-Lbs. Capacity Electric Hoist, with Outboard Rolling Support 320 PITTSBURGH AUTOMOTIVE Portable A-Frame Gantry Crane with JET L-90 Chain Fall Hoist, (Saw Not Included) 321 COFFING 2-Ton Electric Hoist, 2-Way Pendant Controlled 322 JIB RIG 4,000-Lbs. Capacity Fork Lift Boom Attachment 323 MEADE TYPE 40'' WALKER, 40'' Diameter Crane Hook Electromagnet, Capacity Unknown, S/N N/A, with Transformer and Control 324 Approx. 2,000-Lbs. Capacity Crane Stock Magnet

17 325 Approx. 2,000-Lbs. Capacity Crane Stock Magnet 326 TINKER OMEGA MODEL E-900, Electri Mold Manipulator Crane Attachment, S/N EM MODERN 2,600-Lbs. Capacity Dual Battery Powered Hydraulic Dead Leg Crane Lift, S/N N/A 328 Dual Battery Powered Hydraulic Dead Leg Crane Lift, (Batteries Not Included) 329 Dual Battery Powered Hydraulic Dead Leg Crane Lift, (Batteries Not Included) 330 Lot-(1) Barrel Grab and (1) Pallet Grab Attachments 331 PENNSYLVANIA SCALE CO. MODEL 5600, 10,000-Lbs. Capacity Digital Scale, S/N with 48'' x 48'' Raised Platform and Shop Desk 332 Dillon Dynamometer 2,000-Lbs. Capacity Crane Scale 333 Dillon Dynamometer 2,000-Lbs. Capacity Crane Scale 334 Open 335 Open 336 Open 337 SPECTRO MODEL MAXx, Stationary Metal Analyzer, S/N 4S0278, with Hewlett Packard and LITE PC, Monitor, Keyboard, Mouse, Printer and Stand, (Honeywell Chart Recorder Not Included) 338 FISHER SCIENTIFIC JARRELL-ASH DIVISION ATOM COMP SERIES 8000, Spectrometer Metal Analyzer, S/N 718L 339 FISHER SCIENTIFIC JARRELL-ASH DIVISION ATOM COMP SERIES 8000, Spectrometer Metal Analyzer, S/N 10808L 340 DETROIT TESTING MACHINE CO. BRINELL MODEL PHL-2, 5,000-Kg Capacity Electric Hydraulic Down Acting Hardness Tester, S/N 440-R, Foot Pedal Operated, with 2-Door Cabinet and Contents 341 MAGNAFLUX MODEL MAG KIT, Particle Inspection Machine, S/N DIETERT Sand Strength Tester, S/N DIETERT Model 338, Electric Permmeter, S/N DIETERT Model 338, Electric Permmeter, S/N DIETERT Sand Rammer

18 346 Lot-(1) ROCKWELL WILSON MODEL 3PR, Hardness Tester and (1) CLARK MODEL CR8, Hardness Tester (Not in Service) 347 Lot-(2) Tube Funnels with Sand Testing Sieves 348 THOMAS ASHWORTH ''SPEEDY'' Moisture Tester Scale with Permeability Tubes 349 DIETERT Moisture Teller, S/N ELECTRO-NITE Digital Temperature Reader 351 Lot-Hardness Tester Standards 352 Lot-Crack and Defect Testers 353 Lot-(2) MITUTOYO ABSOLUTE 12'' Digital Calipers with Cases 354 Lot-(2) 6'' Calipers with Cases 355 Lot-(2) Indicator Stands and DIETERT Hardness ''B'' Scale 356 Lot-Asst'd Inspection 357 PELOUZE 100-Lbs. Bench Top Scale 358 Lot-(4) Asst'd Digital Bench Top Scales 359 7'' x 10'' x 7'' Angle Plate 360 Stencil Maker 361 Stencil Maker 362 Lot-Letter Stamps in (2) Bin Organizers on Wall 363 Lot-Asst'd Bearings and Bearing Seals in (7) Boxes 364 Lot-Hardware and Misc. with Bin Hole Rack, 2-Door Cabinet, (2) Benches and (1) Shop Desk 365 Lot-Shelving and Racking in (1) Room, (Contents Not Included) 366 Lot-Contents of Maintenance Store Room 367 Lot-Machine Parts with Bench

19 367A Lot-(2) Pneumatic Straight Grinders, (2) Steel Benches and (1) 5'' Bench Vise 368 Dump Hopper, (Delayed Removal Until ) 368A Dump Hopper 369 Dump Hopper 370 Dump Hopper 371 Dump Hopper 371A Lot-(3) Dump Hoppers, (Outside) 372 Rolling Dump Hopper, (Outside) 373 Lot-Steel Stock with Rack, (Outside) 374 Lot-Open Top Drums, (Outside) 375 Lot-Square Steel Tube Stock, (Outside) 376 Section Scaffold with (2) 6' Picks, (Outside) 377 Car Port, (Outside) 378 Nutrition Reclaimer, (Outside) 379 Lot-(5) Charge Buckets, (Outside) 380 Lot-(4) Charge Buckets, (Outside) 381 Lot-(4) Ladles, (Outside) 382 Lot-(2) Mechanical Hand Crank Dumping Ladles, (Outside) 383 Lot-(3) Shell Molding Presses, (Outside) 384 Lot-(3) Shell Molding Presses, (Outside) 385 Lot-(3) Shell Molding Presses with Misc. Machines in (1) Row, (Outside) 386 Lot-(6) Steel Tubs, (Outside)

20 387 Lot-(5) Steel Tubs, (Outside) 388 Lot-(5) Steel Tubs, (Outside) 389 Lot-(5) Steel Tubs, (Outside) 390 8' W x 8' H x 20' Long Sea Container, (Outside) 391 8' W x 8' H x 20' Long Sea Container with Misc. Contents, (Outside) 392 Lot-Steel Tables, (Outside) 393 Lot-(6) Pattern Racks, (Outside) 394 Lot-Asst'd Flat and Shop Carts, (Outside) '' x 16' Belt Conveyor, (No Motor), (Outside) '' x 16' Motorized Belt Conveyor, (Outside) 397 Vertical Sand Elevator, (Outside) 398 Lot-Asst'd Roller Conveyors, (Outside) 399 Lot-Balance of Yard, (No Steel Stock) 400 Lot-Scrap 401 Lot-(10) Sections Light Duty Shelving 402 Lot-(2) Sections Pallet Racking 403 Section Pattern Racking 404 Section Pattern Racking 405 Lot-(3) Sections Pattern Racking 406 Lot-(3) Rows Pattern Racking 407 JUSTRITE 2-Door Paint Safety Cabinet 408 Lot-(1) BULLARD Oiless Air Compressor with (1) Fan

21 409 Lot-Cardboard Drums 410 Section Steel Shelving 411 Lot-Shipping Supplies 412 4' x 5' Aluminum Dock Plate, 15,000-Lbs. Capacity 413 Rubbermaid Outdoor Utility Shed 414 Steel Welding Table with Exhaust Hood 415 Stanley Job Box, Scrap and Shelving 416 Lot-Contents of (1) Office 417 Lot-Contents of (1) Office 418 Lot-Desks, Chairs, 2-Door Cabinet, Refrigerator, Toaster, Microwave and Stand in (1) Office 419 Lot-(2) Desks, Chairs and Air Filtration Unit in (1) Office 420 YALE 2-Door Combination Safe 421 Lot-Desks, Chairs and (11) File Cabinets in (1) Office 422 Lot-(2) Tables with Folding Chairs