Absolute Auction Complete Liquidation By Order of Trustee Altoona-Beasley Manuf., Inc. Wed., Dec. 5, :00 AM Altoona, PA

Transcription

1 Absolute Auction Complete Liquidation By Order of Trustee Altoona-Beasley Manuf., Inc. Wed., Dec. 5, :00 AM Altoona, PA NOTICE: Pursuant to U.S. Bankruptcy Court Case # and by Order of Trustee all equipment assets formerly owned and operated by Altoona- Beasley Manufacturing, Inc. shall be liquidated. All items must sell to the highest bidder without minimums, reserves, or buyer s premiums! LOCATION: 210 East Plank Road, Altoona, Pennsylvania SALES TAX: The Commonwealth of Pennsylvania considers this an isolated sale and does not require the auction company to collect sales tax. DISMANTLEMENT AND LOADOUT: Certain machines will be required to be dismantled and loaded out by a qualified rigger for safety purposes. Loadout fees will be added to the purchaser s invoice. One rigger will be selected and must be used. No other contractors will be permitted. Individual fees will be published in the sale day catalog. Items not requiring professional rigging will be loaded by the auction company at no charge! REMOVAL: After complete payment, all sale items may be removed on sale day as long as the removal activity is not disruptive to the sale and only until 5:00PM. Items may also be removed Thurs. and Fri., Dec. 6th and 7th. and Mon., Dec. 10th thru Wed., Dec. 12th from 8:00AM to 5:00PM. All items must be removed no later than Wed., Dec. 12, 2012 at 5:00PM SALE SITE PHONE: (800) SALE SITE FAX: (888) PA AUCTION LICENSE NO.: AY000281

2 1 MILLER Dialarc 250 Portable AC/DC Welding Power Source 2 LINCOLN Precision Tig 185 Welder, with cart 3 LINCOLN SP135 Plus Wire Feed Welder 4 HOBART 200 Amp Portable Electric Welder 5 Oxygen/Acetylene Torch Set, with bottle cart 6 BLACK & DECKER Cut-Off Saw 7 PORTER CABLE 1/2" Hammer Drill 8 METABO 1/2" Hammer Drill 9 (2) Electric Drills 10 (2) Electric Drills 11 (2) Electric Drills 12 (2) Electric Drills 13 (2) Electric Drills 14 CRAFTSMAN 3/8" Cordless Electric Drill 15 PORTER CABLE 3/8" Cordless Electric Drill 16 Drill Bit Sharpener 17 Electric Angle Grinder 18 (3) MAGNAFLUX Testers 19 Pneumatic Riveter 20 INGERSOLL RAND 3/4" Pneumatic Impact Wrench 21 (3) 1/2" Pneumatic Impact Wrenches 22 (2) 1/2" Pneumatic Impact Wrenches 23 (2) 1/2" Pneumatic Impact Wrenches 24 (2) 1/2" Pneumatic Impact Wrenches 25 (2) 1/2" Pneumatic Impact Wrenches 26 (2) 1/2" Pneumatic Impact Wrenches 27 (2) 1/2" Pneumatic Impact Wrenches 28 (2) 1/2" Pneumatic Impact Wrenches 29 (2) 3/8" Pneumatic Impact Wrenches 30 (2) 1/2" Pneumatic Impact Wrenches 31 (2) 1/2" Pneumatic Impact Wrenches 32 (2) 1/2" Pneumatic Impact Wrenches 33 (2) 1/2" Pneumatic Impact Wrenches 34 (2) 3/8" Pneumatic Ratchets 35 Pneumatic Scalers and Grinder 36 Pneumatic Tools 37 Pneumatic Tools 38 Pneumatic Tools 39 Pneumatic Grinders 40 (3) Pneumatic Drills 41 (3) Pneumatic Drills 42 (3) Pneumatic Drills 43 (3) Pneumatic Drills 44 (3) Pneumatic Drills 45 (3) Pneumatic Drills 46 (3) Pneumatic Drills 47 (3) Pneumatic Drills 48 (3) Pneumatic Drills 49 (3) Pneumatic Drills 50 Pneumatic Blow Guns 51 Pneumatic Blow Guns 52 (2) Pneumatic Sanders 53 (2) Pneumatic Sanders 54 (2) Pneumatic Sanders 55 (2) Pneumatic Sanders 56 Pneumatic Caulking Gun 57 Pneumatic Belt Sander 1

3 58 Pneumatic Clamp 59 Pneumatic Clamp 60 Pneumatic Clamp 61 (3) Torque Wrenches 62 (3) Torque Wrenches 63 (4) Torque Wrenches 64 (4) Torque Wrenches 65 (3) Torque Wrenches 66 (3) Torque Wrenches 67 (3) Torque Wrenches 68 (7) Torque Wrenches 69 Torque Tool Analyzer 70 Tool Chest and Contents, with cart 71 Tool Chests and Contents, with cart 72 Rolling Tool Chest and Contents 73 Rolling Tool Chest and Contents 74 Rolling Tool Chest and Contents 75 Rocker Arm Reamer and Facer, with cabinet 76 Shopmade Oil Pump Flow & Pressure Tester, equipped with pump drive powered by 3 phase electric motor, Lancer GPD 402 motor controller, digital RPM indicator, and flow and pressure meters 77 TOBIN-ARP Model VR Valve Refacer, s/n 1079, equipped with.5hp grinding motor,.5hp valve turning motor, and coolant system 78 DAKE Manual Arbor Press 79 Metal Work Bench and Contents 80 Metal Work Bench and Contents 81 (11) Collapsible Parts Baskets 82 (8) Collapsible Parts Baskets and Contents 83 (3) Rolling Shop Carts 84 (3) Rolling Shop Carts 85 PRESTO BT8127-MOD, 500# Stand-Up Electric Forklift, s/n GS 5,500# Pallet Jack 87 CENTRAL HYDRAULICS 4,000# Pallet Jack 88 CROWN 4,500# Pallet Jack 89 (3) Shop Vacs 90 (3) Shop Vacs 91 SUNNEN Sensor I 125 Digital Torque Wrench 92 SUNNEN Sensor I 125 Digital Torque Wrench 93 (4) Digital Slide Calipers 94 MITUTOYO Digital Micrometer Set 95 (4) Digital Micrometers, 1" to 2" 96 (5) Digital Micrometers, 2" to 3" 97 (2) Digital Micrometers, 3" to 4" 98 Digital Micrometer, 4" to 5" 99 (4) Micrometers 100 Mechanical Micrometer 101 Run-Out Gauges 102 Radius Gauge Set 103 Outside Micrometer 104 (2) Bore Gauges 105 (2) Digital Bore Gauges 106 (2) Bore Gauge Sets 107 (3) Bore Gauge Sets 108 Assorted Depth Gauges 109 Mechanical Micrometer 110 WEBER Gauge Block Set 111 WEBER Gauge Blocks and Holders 2

4 112 MITUTOYO Gauge Blocks 113 RIMAC Spring Gauge 114 RIMAC Spring Gauge 115 SHEFFIELD Visual Gauge 116 (3) Stand-Up Calipers 117 SUNNEN Valve Guide Gauge 118 TOBIN-ARP Valve Guide Gauge 119 Magnetic Gauge Stands 120 Gauge Stands 121 Assorted Dial Indicators 122 Feeler Stock 123 (2) Straight Edges 124 PROVISION 100 Flexible Fiber Optic Scope 125 Bore Gauge Set 126 PERTHEN M4P Perthometer, with printer 127 (4) Pocket Surf III Perthometers 128 Compression Testers 129 SERAPHIN 5 Gallon Test Measure 130 MERRY WEATHER 30"x36"x3" Flat Surface Table, with stand 131 Remaining Contents of Quality Assurance Room (BUYER MUST LOAD) 132 Contents of Room (BUYER MUST LOAD) Sale Continues Outside CLARK Model GCS30MB, 4,075# Solid Tired Forklift, s/n G138MB , powered by 4 cylinder LP gas engine and shuttle transmission, equipped with 189" 3-stage mast, mast tilt, 54" forks, side shift, FOPS canopy, and 20x8 1/2x16 front and 17x6x12 1/8 rear tires. In good condition with fair tires DODGE Model Ram 1500, 4x4 Pickup Truck, VIN# 1B7HF16Y1VJ617509, powered by Magnum 5.2L gas engine and automatic transmission, equipped with 8' bed with liner, Meyer 8' snow plow, tow package, air conditioning, and 245/75R16 tires. In good condition with fair tires. (Odometer Reads 056,227 Miles) FORD Model F-550XL Super Duty Single Axle Van Body Truck, VIN# 1FDAF56P44EA59805, powered by Powerstroke 6.0L diesel engine and automatic transmission, equipped with 16'6" FRP van body with heat, air conditioning, and electric lift gate and swing rear door, curbside door, dual fuel tanks, cruise control, air conditioning, and 225/70R19.5 tires In good condition with good tires. (Odometer Reads 077,785 Miles) Sale Continues Inside PETERSON Model SRA30 Pneumatic Cylinder Head Spring Removal/Assembly Fixture, s/n 36973, equipped with manual angle table 137 DAKE 10 Ton Hydraulic Arbor Press 138 DAKE Manual Arbor Press 139 KRW Manual Arbor Press 140 (2) Metal Shop Tables and Contents 141 Metal Work Cabinet and Work Bench, with vise and contents "x40" Metal Inspection Table, with drip pan 143 Wooden Table with Torque Tester and (2) File Cabinets ENCO Model Lathe, s/n , powered by 1.5HP single phase electric motor, equipped with 6" 3-jaw chuck, 44" bed, 160 to 600 RPM chuck speed, turning tool holder, and metal table 145 BERCO Model RAC1500 Camshaft Grinder, s/n 438B, equipped with 6' bed, 18" grinding wheel with 3KW 3 phase electric motor, electric oil bath system, and approx. (100) cam masters (RIGGING FEE - $800) 3

5 146 STORM VULCAN Model 744 Cam Shop Camshaft Polisher, s/n 50285, equipped with 56" bed, 3/4" polishing belt with.5hp single phase electric motor; camshaft rotator with.5hp single phase electric motor; and Enco model 40050, 475 RPM to 2600 RPM drill press with.5hp single phase electric motor (RIGGING FEE - $300) CI Camshafts and Rack HO, 351 W, 4.2, 4.0, and 3.0 Liter, and 183 CI Cam Shafts, and rack CI, 183 Cam Shafts and Racks 150 Assorted Cam Shafts and Rack 151 Metal Work Bench and Contents 152 (2) Metal Work Benches and Contents 153 Metal Work Bench and Cabinet and Contents SUNNEN Model ML-2000-DF Connecting Rod Hone, s/n 4D1-1187, powered by 230-volt 3 phase electric motor, equipped with 200 to 3000 RPM spindle speed, 60 to 350 SPM stroker speed,.25 to 6.6" stroke length, AG300 precision gauge, pneumatic rod clamp, and Sunnen model ML3490D oil bath system (RIGGING FEE - $300) 155 SUNNEN Model LBB-1810 Precision Honing Machine, s/n 24073, powered by 1HP 3 phase electric motor, equipped with 12" throw auto-stroke Sunnen AG-300 pin fitting and rod reconditioning gauge, oil bath system, and cabinet with tooling (RIGGING FEE - $300) 156 SUNEX 12 Speed Drill Press 157 PACKARD Heavy Duty Drill Press 158 PORTER CABLE Wet/Dry Belt Grinder 159 Metal Work Station with Impact Wrench 160 SUNNEN Model CRG2000K Angle Cap & Rod Grinder, s/n 1W1-1030, powered by 115 volt, 3/4HP single phase electric motor, equipped with pneumatic rod clamp 161 SUNNEN Model CRG2000K Angle Cap & Rod Grinder, s/n 1W1-1033, powered by 115 volt, 3/4HP single phase electric motor, equipped with pneumatic rod clamp 162 Metal Work Station with Impact Wrench and Electric Grinder/Sander 163 (2) SUNNEN AG300 Pin Fitting and Rod Reconditioning Gauges ' of 18" Roller Conveyor 165 SUNNEN Model BP-10K, 10 Ton Hydraulic Pin Press, s/n 8368, powered by 1 1/2HP rod heater and metal table 166 TOBIN-ARP Model PM2500 Piston Pin Cutter, s/n , powered by 1/2HP 22" rod capacity, pneumatic rod clamps, 7" throw, and coolant system 167 SUNNEN Model CG-8400K Cap Cutting Machine, s/n 2L11026, powered by single phase electric motor 168 TOBIN-ARP Model R1 Connecting Rod Bend, Twist, & Length Tester, s/n 84414, equipped with Storm Vulcan 4U-50, 3,000PSI manual hydraulic rod straightening press and pneumatic rod clamp, metal table with vise and contents 169 MAGNUS Parts Washer and Drying Rack 170 (5) Drums of Connecting Rods SERDI Model 100HD Valve Seat Machine, s/n 111, powered by 240-volt 54" bed, manual angle head stands, and pneumatic floating spindle head, and tooling cabinet (RIGGING FEE - $400) SERDI Model 100 Valve Seat Machine, s/n 732, powered by 240-volt 39" bed, manual angle head stands, and pneumatic floating spindle head (RIGGING FEE - $400) 173 SUNNEN Model VGS-20C Valve Seat Machine, s/n 1J1-1048, powered by 230-volt single phase electric motor, equipped with 46" bed and pneumatic clamps, and tooling cabinet (RIGGING FEE - $400) 4

6 ROTTLER Model SF7M Surfacing Machine, s/n 24430, powered by 240-volt 0 to 40 in./min. feed rate, 300 to 1200 RPM spindle speed, 14" cutting head, 21"x48" slotted table, and 15"x30" manual adjusting removable slotted table (RIGGING FEE - $400) 175 K-LINE Model KL9942 Pneumatic Valve Guide Installation Bench, equipped with 40" travel 176 K-LINE Valve Guide Installation Bench, equipped with 30" travel 177 MASTER TOOL Pneumatic Head Leak Detector, with tooling 178 WINONA VAN NORMAN Drill Press, with rotating and tilting table 179 K-LINE Model KL4575 Valve Stem Grinder, s/n 28043, powered by 220 volt 3-phase electric motor 180 STORM VULCAN Model SP-90 Heated Spray Wash Cabinet, s/n 790, powered by 220 volt, 3-phase electric motor, equipped with 90 gallon water tank, natural gas water heater, and 24" diameter rotating parts basket (RIGGING FEE - $500) 181 Work Bench with Dual Wheel Bench Grinder, (2) File Cabinets, Rolling Tool Box, and Contents 182 Air Tank ' of 28" Roller Conveyor 184 Metal Shop Table, Shelf, and Contents 185 (2) Metal Shop Tables and Contents 186 Metal Shop Table with Cylinder Block Stands BERCO Model RTM225A-BS Crankshaft Grinder, s/n 612B, powered by 220-volt single phase electric motor, equipped with 88" bed, 24" grinding wheel, Peterson "finger tip" controlled "swing chucks", oil bath system, and tooling cabinets. (RIGGING FEE - $800) BERCO Model 225A-40 Crankshaft Grinder, s/n 596B, powered by 220-volt 88" bed, 24" grinding wheel, 1 3/4" 3-jaw chuck, and oil bath system, and tooling cabinet (RIGGING FEE - $800) 189 BERCO Model RTM270 Crankshaft Grinder, s/n 376B, powered by 220-volt 10' bed, 24" grinding wheel, Peterson "finger tip" controlled "swing chucks", and oil bath system, and tooling cabinet (RIGGING FEE - $800) 190 UNUSED Grinding Wheels 190A Grinding Wheels 190B Grinding Wheel Balancer 191 STORM VULCAN Model Kot-A-Fin Crankshaft Polisher, s/n not available, powered by 220-volt single phase electric motor, equipped with 80" bed, 2 1/2-belt capacity, and hand-held pneumatic polisher, and belt cabinet (RIGGING FEE - $300) 192 SUNNEN Model HS30K Crankshaft Honing Stand, s/n 1C61734, powered by 115-volt Dewalt 1/2" electric drill 193 STORM VULCAN Model CSP-60 Hydraulic Crank Straightening Press, s/n BERCO Model ACP160A Double Block Programmable Cylinder Boring Machine, s/n 117B equipped with 67" travel and manual block clamps, and tooling cabinet (RIGGING FEE - $500) 195 ROTTLER Model F54X Programmable Single Block Cylinder Head Boring Machine, s/n 19307, powered by 240-volt 54" travel and pneumatic block clamp, and work station (RIGGING FEE - $500) 196 ROTTLER Model FA24MAB Single Block Cylinder Boring Machine, s/n 4306R, powered by 230-volt 3 phase electric motor, equipped with manual spindle travel (RIGGING FEE - $400) 5

7 197 SUNNEN Model CK-21D Programmable Cylinder Head Honing Machine, s/n 3X1-1175, powered by 230-volt 3 phase electric motor, equipped with 56" spindle head travel and oil bath system, and tooling cabinet (RIGGING FEE - $500) 198 SUNNEN Model CV-616-D Cylinder Head Boring & Honing Machine, s/n 1H1-2966, powered by 230 volt, 3-phase electric motor, equipped with 48" spindle head travel, oil bath system, and tooling cabinet (RIGGING FEE - $500) 199 ROTTLER Model FA2MACB Single Block Cylinder Boring Machine, s/n 3839R, powered by 220-volt 3 phase electric motor, equipped with 44" manual spindle travel and pneumatic clamping block holder (RIGGING FEE - $300) 200 Boring and Honing Head Blocks 201 SUNNEN Model CH100K Align Honing Machine, s/n 1373, powered by 115 volt, Sunnen 3/4HP electric drill, 2.4" to 4.0" hones, and oil bath system (RIGGING FEE - $400) 202 AXE Model SW4-2032GHT Heated Parts Washer, s/n 6914, powered by 230-volt natural gas heater, approx. 100 gallon tank, (4) turntables, and pneumatic door clamps (Meter Reads 16,336 Hours) (RIGGING FEE - $800) 202A JASPER Model PUMP Pin Press, s/n JOBJ333352, with hydraulic pump powered by 5HP 3-phase electric motor 203 Shop Made Heated Dip Tank, with work station and accessories 204 SUNNEN Model CRG750 Heavy Duty Cap and Rod Grinder, s/n 12968, with metal work bench and 351 Cam Shafts and (3) Racks 206 DAKE Manual Arbor Press, with stand ' of 17.5" Roller Conveyor ' of 20" Roller Conveyor, Work Station, Rack and Contents 209 Cam Shaft Reconditioning Station, consisting of work station, parts bins, and tooling 210 MAGNUS Maji-Lif Parts Washer, with pneumatic tray raise 211 Crankshaft Installation Station consisting of work bench with vise, shelving, parts bins, tools and hardware 212 (2) Metal Work Benches, Shelf, and Contents 213 Metal Work Bench, Gas Fired Heater, and Vise 214 Metal Work Bench, Pneumatic Hydraulic Press, and Impact Wrench , 4.0, 3.8, and 3.0 Liter Crankshafts and Rack CI Crankshafts and Rack CI Crankshafts and Rack CI Crankshafts and Cart 219 Crankshafts and Cart 220 Crankshafts and Cart 221 Crankshafts and Cart ' of 18" Roller Conveyor, with 2' swivel section ' of 18" Roller Conveyor, with 90 degree bend section 224 (1 Section) Pallet Racking (BUYER MUST DISMANTLE) 225 (4 Sections) Pallet Racking 226 Assorted Pistons, Contents of (1) Section of Pallet Racking 227 UNUSED Piston Sets (Ford 289/302) (Rejects) 228 Assorted Cylinder Heads and 351 Rebuilt Cylinder Heads 230 Assorted Cylinder Heads 231 Assorted Cylinder Heads 6

8 232 Assorted Engine Hardware and Parts 233 Valve and Valve Springs 234 Assorted Hardware 235 Timing Gears 236 Oil Pumps and Gaskets 237 Aluminum Heads and Front Covers 237A Rebuilt E40D Transmission 237B Rebuilt Turbo Hydramatic 350 Transmission 238 Rebuilt 6.5 Liter Diesel Engine, with stand 239 Rebuilt 302 Short Block 240 Final Assembly Station and Contents 241 Final Assembly Station and Contents 242 Final Assembly Station and Contents 243 Final Assembly Station and Contents 244 Shop Fan 245 Shop Fan 246 Shop Fan 247 Shop Fan 248 Shop Fan 249 Shop Fan 250 Shop Fan 251 Shop Fan " Portable Shop Fan " Portable Shop Fan 254 (3) Shop Fans 255 (3) Shop Fans 256 (3) Shop Fans 257 (4) Shop Fans 258 7' of 28" and 41'6" of 24" Roller Conveyor ' of 42" Roller Conveyor ' of 22" Roller Conveyor ' of 24" Roller Conveyor 263 JASPER Engine Test Stand, equipped with RPM, temperature, oil pressure, and oil flow rate gauges, and assorted natural gas adapters (RIGGING FEE - $300) 264 JASPER Engine Test Stand, equipped with RPM, temperature, oil pressure, and oil flow rate gauges, and assorted natural gas adapters (RIGGING FEE - $300) 265 JASPER Engine Test Stand, equipped with RPM, temperature, oil pressure, and oil flow rate gauges, and assorted natural gas adapters (RIGGING FEE - $300) 266 JASPER Engine Test Stand, equipped with RPM, temperature, oil pressure, and oil flow rate gauges, and assorted natural gas adapters (RIGGING FEE - $300) 267 Metal Work Bench, Cabinet, and Work Stand, with drip pan 268 BUDGET 1/2 Ton Chain Hoist, with free standing floor mounted jib 269 BUDGET 1/2 Ton Chain Hoist, with free standing floor mounted jib 270 BUDGET 1/4 Ton Chain Hoist, with free standing floor mounted jib 271 BUDGET 1/4 Ton Chain Hoist, with 1/2 ton free standing floor mounted jib 272 BUDGET 1 Ton Chain Hoist 273 BUDGET 1/2 Ton Chain Hoist 274 BUDGET 1/2 Ton Chain Hoist 275 BUDGET 1/2 Ton Chain Hoist 276 BUDGET 1/4 Ton Chain Hoist 277 BUDGET 1/4 Ton Chain Hoist 278 BUDGET 1/4 Ton Chain Hoist 279 BUDGET 1/4 Ton Chain Hoist ' of 24" Roller Conveyor 7

9 280 LS INDUSTRIES Heated Parts Washer, s/n WB-CMB, powered by 230-volt natural gas heater, (2) 48" stacked parts baskets, approx. 100 gallon water tank, and manual door clamp (RIGGING FEE - $1,200) 281 AXE Model SW2032 Heated Parts Washer, s/n 5149, powered by 230-volt single phase electric motor, equipped with natural gas heater, approx. 100 gallon water tank, (2) turntables, and pneumatic door clamps (Meter Reads 19,283 Hours) (RIGGING FEE - $800) 282 STORM VULCAN Jet Clean Heated Parts Washer, powered by 230-volt single phase electric motor, equipped with natural gas heater, approx. 100 gallon tank, and pneumatic door clamp (Not Operational) (RIGGING FEE - $800) 283 Assorted Wash Baskets 284 BECKART ENVIRONMENTAL Waste Water Treatment System, equipped with 560 gallon holding tank 285 LS 30"x60"x50"H Vibratory Parts Washer, s/n S-7S, powered by 3 phase electric motor, equipped with electric heater and timer, and 20"x24" manual wash table (RIGGING FEE - $300) 286 LS 28"x57"x50"H Vibratory Parts Washer, powered by 3 phase electric motor, equipped with electric heater and timer, and 20"x24" manual wash table (RIGGING FEE - $300) 287 ULTRAMATIC Model 0H Vibratory Finisher, powered by single phase electric motor, equipped with 30"x15"x12"D box (RIGGING FEE - $100) Gallon Oil Storage Tank, with Graco pneumatic pump and filter system (Approximately 3/4 Full) 289 JET Model GHB1340 Geared Head Bench Lathe, s/n 9112N2224, powered by 240-volt single phase electric motor, equipped with 70 to 1255 spindle speed, 56" bed, and 7" 3-jaw chuck (RIGGING FEE - $250) 290 TRANTER Pedestal Drill Press, powered by 3-phase electric motor 291 DAYTON 7" Dual Wheel Pedestal Grinder 292 Bolt Bin and Contents 293 Metal Work Cabinet, with vise, parts cabinet, and contents 294 Metal Work Cabinet and Contents 295 Parts Cabinet, File Cabinet, and Contents 296 Parts Cabinet, Desk, and Contents 297 Parts Cabinets, Shelving, and Contents 298 Pipe Threading and Bending Tools 299 PANGBORN Model 6GN Rotary Shot Blast Machine, s/n unknown, powered by 460-volt 3 phase electric motor, equipped with electric door, shot blast retrieval elevator, and Pangborn size 300 dust collector (RIGGING FEE - $1,800) 300 PANGBORN Model 3GN Rotary Shot Blast Machine, s/n 57413, powered by 460-volt 3 phase electric motor, equipped with electric door, shot blast retrieval elevator, and dust collector (RIGGING FEE - $1,500) 301 PANGBORN Model 3GN Rotary Shot Blast Machine, s/n 69419, powered by 460-volt 3 phase electric motor, equipped with electric door, shot blast retrieval elevator, and Pangborn size 300 dust collector (RIGGING FEE - $1,500) 302 DONALDSON Model Torit V Dust Collector & Blowout Cabinet, powered by 480-volt 3 phase electric motor, equipped with 10' section of roller conveyor (RIGGING FEE - $600) 303 ROTTLER Model SF-2 Block Surfacing Machine, s/n 22013, powered by 230-volt 250 to 1250 RPM spindle speed, adjustable feed rate, 14" cutter head, 70" travel, 15"x30" manual adjustable slotted table, and pneumatic clamping block holder (RIGGING FEE - $400) 304 Shop Made Hoist Frame, with 440# electric hoist 305 BUDGET 1 Ton Electric Hoist 8

10 306 BUDGET 1 Ton Electric Hoist 307 BUDGET 1/4 Ton Electric Hoist 308 Work Station, consisting of (3) benches, cabinet, vise, and contents 309 Roller Conveyor Baskets 310 (3) Rolling Shop Carts 311 (2) Rolling Shop Carts 312 (5) Rolling Shop Carts 313 (4) Rolling Shop Carts 314 (5) Rolling Shop Carts 315 (3) Rolling Shop Carts 316 (4) Rolling Shop Carts 317 Work Bench, Parts Baskets, and Miscellaneous 318 Steel Stock and Conduit 319 Steel Stock, Parts Basket, Work Bench, and Vise 320 Approximately 85' of Assorted Roller Conveyor and Work Bench 321 SULLAIR Model 12B-50H, 125 PSIG, 50HP Electric Air Compressor, s/n , powered by 230-volt single phase electric motor, equipped with Gardner Denver model RNC250CA3 air dryer, s/n GD250A (Meter Reads 01,964 Hours) (RIGGING FEE - $550) 322 Shelves and Duct Work (Contents of Corner) (BUYER MUST LOAD) 323 (3) Shelves and Contents (Remainder of Room) (BUYER MUST LOAD) 324 BUDGET 3-Door Pizza Oven 325 HOBART Model Tigware 250 Portable AC/DC Welder, s/n 92WS27741 and Bench with Welding Rod ' of 24" Roller Conveyor 327 Electric Belt Sander 328 (2) Metal Work Benches with Vise and Bench Grinder WALKER TURNER 16 Speed Radial Drill Press, with 30"x32" slotted table 330 TRANTER Model B21 Cut-Off Saw, s/n , powered by 3-phase electric motor 331 Portable 1" Belt Sander, powered by single phase electric motor 332 DELTA 10" Tilting Arbor Saw, powered by 230 volt single phase electric motor 333 Rolling Cabinet, Shop Cart, and Contents EMPIRE Model PF3642 Bead Blaster, s/n 5/ , powered by single phase electric motor (RIGGING FEE - $400) 335 EMPIRE Model DCM200A Profinish Bead Blaster, s/n not available, powered by 240-volt single phase electric motor, equipped with dust collector (RIGGING FEE - $600) 335A (1 Pallet) Size 7 Blasting Sand 336 STORM VULCAN ANDERSON Model AB1540A Surfacer, s/n 401, powered by 240-volt single phase electric motor, equipped with 18" belt width capacity and 36" surfacing area (RIGGING FEE - $300) "x36"x2" Flat Surface Table 338 Metal Table with ATLAS Electric Drill Press and Vise 339 (3) Metal Tables and Contents 340 Contents of (2) Wooden Cabinets 341 (13) Collapsible Pallet Baskets 342 Wooden Table, with light 343 Propane Tank Storage Cabinet 344 (12) Collapsible Pallet Boxes 345 (13) Collapsible Pallet Boxes 346 Collapsible Pallet Boxes and Pallet Rack Shelving 347 (4) Poly Pallets 348 (2) Pallet Boxes Crank Shafts

11 349 Assorted Roller Conveyor 350 SUNNEN VGS-20 Grinder (NOT WORKING) 351 ROTTLER FA2MA Boring Bar (NOT WORKING) 352 PANGBORN Sand Blast Machine (NOT WORKING) 353 (3) Metal Shop Tables, (1) with vise 354 Foreman's Desk, (2) Metal Shop Tables, (1) with vise POLLUTION CONTROL Model ATR378, 950,000 BTU Burn-off Furnace, s/n 5487, equipped with (2) Incinomite model J121 natural gas fired burners, 8'x9'x9'H fire box, water spray system, digital temperature controller, and 12-hour timer (RIGGING FEE - $2,000) 356 POLLUTION CONTROL Model ATR88, 300,000 BTU Cleaning Oven, s/n 1288, equipped with (2) Incinomite natural gas fired burners, 80"x58"x70"H fire box, Honeywell temperature controller, and 12-hour timer (RIGGING FEE - $1,000) 357 Hydraulic Packaging System, powered by 2HP single phase electric motor, equipped with 30"x24" table, air controls, and 28' of 36" roller conveyor 358 Paint Line, consisting of: 6'x3'x7' high filter box with 24" top mounted fan, shop made drying booth with (2) Master Flow Blow heat guns, 23' of 20" roller conveyor, pneumatic hoist, fireproof pain cabinet, and metal work benches (RIGGING FEE - $250) 359 (2) 55 Gallon Drums 360 (2) 55 Gallon Drums Cutting Oil, with containment pallet 361 (2 Drums) Rust Inhibitor, with containment pallet Gallon Drum Water Treatment, with containment pallet Gallon Drum Coolant, with containment cart and barrel pump Gallon Drum 10W Motor Oil, with containment cart and barrel pump Gallon Drum Spray Cabinet Cleaner, with containment cart 366 Containment Cart Step Rolling Stairs Step Rolling Stairs 369 (2) 3-Step Rolling Stairs ' Aluminum Step Ladder 371 6' Fiberglass Step Ladder 372 Pallet Box of Hardware 373 Assorted Tools and Cart 374 Assorted Tools and Cart 375 Metal Table and Miscellaneous 376 (2 Boxes) and (1 Barrel) Scrap Engine Parts 377 Dual Wheel Bench Grinder, with cart 378 (2) Metal Tables 379 Pallet Box Aluminum Engine Parts (SCRAP) 380 (4) Transmissions 381 (1 Pallet) Engine Parts (SCRAP) 382 Valve Shipping Strips 383 Desks, Chairs, Cabinets, and Miscellaneous (Contents of Office) (BUYER MUST LOAD) 384 Desks, Chairs, Cabinets, and Computers (Contents of Office) (BUYER MUST LOAD) 385 Conference Table and Chairs, Cabinets, and Miscellaneous (Contents of Office) (BUYER MUST LOAD) 386 PA System 387 Plastic Parts Bins 388 (2 Sections) Pallet Racking and Contents (2 Sections) Pallet Racking

12 390 Contents of (4) Sections Pallet Racking 391 (4 Sections) Pallet Racking 392 (2 Sections) Shelving and Contents (BUYER MUST LOAD) 393 (2 Sections) Shelving and Contents (BUYER MUST LOAD) 394 (3) Cabinets and Contents (BUYER MUST LOAD) 395 (1 Pallet) Pallet Rack Shelving 396 Fiberglass Trash Cart 397 (3) 2-Wheel Dollies 398 (3) 2-Wheel Dollies 399 (3) 2-Wheel Dollies 400 (4) 2-Wheel Dollies 401 Desk with return, Metal Desk, Table, Shelf, File Cabinet, and Dividers (Contents of Office Area) 402 (2) Metal Shop Tables 403 Cabinet and Contents 404 Contents of (4) Shelves 405 (4) Round Folding Tables and Chairs 406 Folding Chairs and Cart 407 Folding Chairs and Cart Thank You For Attending 11