Pipeline Services Pigging Products

Transcription

1 & Pipeline Services Pigging Products As the industry s most trusted provider of integrated piping maintenance, modification and repair capabilities for a full range of pressurized piping system applications, TDW delivers customized pipeline service and pigging solutions specifically designed to optimize performance, reduce costs and make downtime a thing of the past. Pipeline Integrity Services: On- and off-line cleaning Commissioning/Decommissioning Consulting Services Engineering Services Turnkey Project Management High-resolution Magnetic Flux Leakage (MFL) Technology Multiple Dataset technology, including SpirALL MFL Active Speed Control Technology XYZ Mapping Deformation Technology Pigs and Pigging Products: Batching & Displacement Pigs Foam Pigs Pipeline Cleaning Pigs Specialty Pipeline Pigs, including PitBoss Pig, V-Jet Pig, X-Pig Tool D-2000 Closures PIG-SIG Pig Passage Indicator, intrusive and non-intrusive TracMaster Pig Tracking System SmartTrap Pig Launchers and Receivers, including the SmartTrap Automated Combo Launcher and Receiver Pipeline Services & Pigging Products Non-Destructive Examination & Repair Pull-Through Inspection Service Hydrostatic Testing and Drying Registered Trademarks of T.D. Williamson, Inc. in the U.S. and foreign countries

2 Pipeline Services Pigging Products As the industry s most trusted provider of integrated piping maintenance, modification and repair capabilities for a full range of pressurized piping system applications, TDW delivers customized pipeline service and pigging solutions specifically designed to optimize performance, reduce costs and make downtime a thing of the past. Pipeline Integrity Services: On- and off-line cleaning Commissioning/Decommissioning Consulting Services Engineering Services Turnkey Project Management High-resolution Magnetic Flux Leakage (MFL) Technology Multiple Dataset technology, including SpirALL MFL Active Speed Control Technology XYZ Mapping Pigs and Pigging Products: Batching & Displacement Pigs Foam Pigs Pipeline Cleaning Pigs Specialty Pipeline Pigs, including PitBoss Pig, V-Jet Pig, X-Pig Tool D-2000 Closures PIG-SIG Pig Passage Indicator, intrusive and non-intrusive SmartTrap Pig Launchers and Receivers, including the SmartTrap Automated Combo Launcher and Receiver Pipeline Services & Pigging Products Deformation Technology Non-Destructive Examination & Repair Pull-Through Inspection Service Hydrostatic Testing and Drying

3 Pipeline Services / Pigging Solutions Date: January 2017 Supersedes: May 2013 Contents Notice Product Warranty Terms and Conditions Cleaning Pig Application Data Form pi 3/99 OptionAll Cleaning Pigs 4" through 14" VANTAGE V Cleaning Pig 16" through 42" PitBoss Cleaning Pig 6" and Larger FJR/JRN Cleaning Pigs 2" through 6" VANTAGE + Pigs 2" through 14" Foam Pigs 2" through 24" WCK Cleaning Pigs 6" through 14" Pencil Brush Cleaning Pigs 4" through 42" Batching/Displacement Pig Application Data Form pi 3/99 OptionAll Batching Pigs 4" through 14" VANTAGE V Batching Pig 16" and Larger BiDirectionAll Pig 4" through 60" Series IV BiDirectionAll Pig 4" through 60" Inflatable UNISPHERE 4" and Larger ULTRA Pig-All Urethane 16" through 36" XPig Multi-purpose Utility Tool 4" through 12" Gauging Pigs 4" through 36" V-Jet Corrosion Inhibitor Pig 4" through 28"

4 Contents Continued Pipeline Services / Pigging Solutions Date: March 2017 Supersedes: January 2017 Pig Parts Urethane Scraper Cups 2" through 48" Scraper Discs 4" through 36" Brushes 2" through 42" Urethane Blades 6" through 48" Pigging Systems Closure Application Data Form cl 5/01 Pigging Launchers & Receiver Application Data Form l&r 3/99 PIG-SIG IV Scraper Passage Indicator PIG-SIG V Scraper Passage Indicator PIG-SIG NI Non Intrusive Pig Passage Indicator D-500 Threaded Closures 2" through 14" D2000 Clamp Ring Closures 4" and Larger SmartTrap Launchers & Receivers 6" through 36" Pigging Systems TDW Pig Washer TracMaster Pro & Lite Pig Location & Tracking System Pipeline Services Geometry Inspection Application Data Form gi 2/11 Inline Inspection Application Data Form ii 2/11 Pipeline Cleaning Service Data Form pcs 1/01

5 Date: March 1999 Supersedes: n/a Notice Any operation involving work on pipe containing liquids or gases under pressure is potentially hazardous. It is necessary that correct procedures be followed in the use of this equipment to maintain a safe working environment. No person should use this equipment who is not fully trained in the procedures stated in its manual and who is not fully aware of the potential hazards connected with work on pipe containing liquids or gases under pressure. The equipment purchaser is responsible for the manner in which the equipment is used and the training and competence of the operators. Should any difficulty arise at any time in the use of equipment, please contact TDW immediately. In the U.S., Toll Free: TDWmSon ( ), Phone: (918) , Fax: (918) , info@tdwilliamson.com Copyright All rights reserved T.D. Williamson, Inc. Registered trademark of T.D. Williamson, Inc. TM Trademark of T. D. Williamson, Inc. Data subject to change without notice. Printed in USA. ISO Certified 9001 and 9002

6 Date: June 2000 Supersedes: September 1999 Product Warranty 1. Products manufactured by T. D. Williamson, Inc., are warranted free from defects in material and workmanship for a period of three (3) years from the date of shipment from the factory. Elastomer products are warranted for one (1) year under proper storage to be free from defects in material and workmanship. The foregoing warranty does not apply to any items not manufactured by T. D. Williamson, including but not limited, to, electronic devices, switch components, pumps, o-rings, purchase cylinders, etc. These third party parts will revert back to suppliers warranty. TDW assumes no liability under this or any other warranty for components not manufactured by TDW. This Warranty applies only to products shipped after June 30, If TDW accepts any claim made under this Warranty, TDW s liability, if any, shall be limited to, at TDW s sole option, repair or replacement of the failed part or product, or a refund of the purchase price, less an allowance for services rendered for the product prior to the Warranty claim. TDW disclaims any and all responsibility for special, consequential or incidental damages arising out of or related to the sale, use, or inability to use any products covered by this Warranty. 3. Buyer agrees not to return goods for any reason except with the prior written consent of TDW, which consent, if given, shall specify the terms, conditions and charges upon which any returns may be made. Materials returned to TDW for Warranty work must have a Return Material Authorization (RMA) number, and such number must be noted on the package at the time of shipment. Claims under this Warranty must be made in writing within ten (10) days of any failure and sent by registered mail to: P. O. Box 3409, Tulsa, Oklahoma Any failed products or parts must be held for inspection by TDW or, at TDW s option, returned to TDW s factory. Customer shall prepay shipping charges, and shall pay all duties and taxes, as applicable, for products or parts returned to TDW for warranty service. 4. This Warranty shall not apply to any product or component which has been repaired or altered by anyone other than TDW, or has become damaged due to misuse, negligence or casualty, or has been operated or maintained contrary to TDW s printed instructions and warnings. 5. The sole purpose of the exclusive remedy contained in the limited Warranty shall be to provide repair or replacement of failed products, or to refund the purchase price of the failed product as explained above in paragraph 2. This exclusive remedy shall not be deemed to have failed of its essential purpose so long as TDW agrees to repair or replace the failed product or to refund the purchase price as explained above. 6. All rights, duties, and obligations arising under this limited Warranty shall be governed by the laws of the State of Oklahoma, U.S.A., regardless of conflict of laws provisions. In the event Buyer initiates litigation under this Warranty, Buyer hereby agrees that jurisdiction for such litigation shall be brought only in the District Court for the County of Tulsa, Oklahoma. 7. TDW reserves the right to make any changes in or improvements on its products without incurring any liability or obligation to update or change previously sold product and/or the accessories thereto. 8. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE, WHICH ARE EXPRESSLY DISCLAIMED. TDW NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO MODIFY THESE TERMS AND CONDITIONS, WARRANT SPECIFIC APPLICATIONS, OR ASSUME FOR TDW ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF ANY TDW PRODUCT OTHER THAN AS PROVIDED IN THIS WARRANTY.

7 Terms and Conditions Date: September Minimum Order: $50.00 (U.S.). Any combination of products or services is allowed to satisfy minimum on a single shipment to a single destination. 2. Orders: All orders are subject to acceptance by T. D. Williamson, Inc. 3. Return of Materials: Goods may be returned to T. D. Williamson, Inc., only after approval and receipt by customer of definite shipping instructions and our written Return Materials Authorization. Returned goods are subject to restocking or reconditioning charges. Customer fabricated items or those requiring special material or special size will not be accepted for return. 4. Prices: Prices are subject to change without notice. 5. Taxes: Any tax based on or measured by the charges made for, or the cash receipts from the sale of products or services shall be added to the stated price. 6. Delivery: Our responsibility ceases upon delivery to any common carrier; and we do not, unless previously instructed, insure shipments beyond the point of delivery to said carrier. We make every effort to ship all material within the time indicated by us, but do not guarantee to do so, and all such indications are subject to delays occasioned by causes beyond our control. We assume no responsibility for delays in delivery or defaults resulting from strikes, work stoppages, fire, floods, accidents, inability to obtain materials, fuels or transportations, governmental decree, or any other causes which are unavoidable. 7. Claims: Claims for shortages or defective products must be made within 10 days after receipt of shipment. Loss or damage to materials in transit is the responsibility of the carrier. 8. Cancellations and Changes: Orders once placed and accepted can be canceled or changed only with our consent and upon terms that will save us from loss. 9. Cost of Collection and Attorney Fees: Buyer shall be responsible for all our costs and expenses, including attorney fees, incurred by us in collecting the purchase price for goods or services sold beyond its due date inclusive of delinquency charge. 10. Terms of Payment and Delinquency Charge: Our terms of payment are as shown on our quotation or invoice. All accounts are payable in United States funds, free of exchange rate variation or collection charges. A delinquency charge will be added on any amount not paid within the stated terms of payment and thereafter on all accounts in arrears until paid. 11. Delays in Performance: T. D. Williamson, Inc., shall not be liable for any delay in performance hereunder due to unforeseen circumstances or due to causes beyond its control including, but not limited to, acts of nature, acts of government, labor disputes, delays in transportation, and delays in delivery or inability to deliver by T. D. Williamson, Inc. s suppliers. 12. Order of Precedence: (a) These Terms and Conditions and any attachments take precedence over customer s additional or different terms and conditions, to which notice of objection is hereby given. Acceptance by customer is limited to these Terms and Conditions. Neither T. D. Williamson, Inc. s commence of performance nor delivery shall be deemed or construed as acceptance of customer s additional or different terms and conditions. (b) Customer s purchase of T. D. Williamson, Inc., products hereunder represents acceptance of these Terms and Conditions and any attachments, which together constitute the entire understanding between the parties and supersede any previous communications, representations, or agreements by either party whether verbal or written. No change or modification of the Terms and Conditions herein shall be valid or binding on either party unless in writing and signed by an authorized representative of each party. 13. Governing Law: Any dispute regarding the interpretation or validity hereof shall be governed by the laws of the State of Oklahoma. The parties hereby agree that any dispute relating to the products or services sold hereunder shall be subject to the jurisdiction of the courts within the State of Oklahoma. 14. Miscellaneous: (a) Except as may be prohibited by the U.S. Bankruptcy Laws, in the event of any insolvency or inability to pay debts as they become due by a party hereto, or voluntary or involuntary bankruptcy proceeding by or against a party hereto, or appointment of a receiver or assetnee for the benefit of creditors, the other party may elect to cancel any unfulfilled obligations hereunder. (b) Any required notices shall be given in writing at the address of each party set forth herein, or to such other addresses either party may substitute by written notice to the other. (c) Neither party may assign nor transfer any of the rights, duties, or obligations herein, without the prior written consent of the other, and any purported attempt to do so shall be null and void. (d) TDW s failure to exercise any of its rights hereunder shall not constitute or be deemed a waiver or forfeiture of such rights. (e) Stenographic and clerical errors are subject to correction.

8 TDW Pigging Products TDW Pigs Application Data Form To help us better serve you in providing the right TDW products for your piping system requirements, please complete this form and return to TDW by mailing or by fax (see below). Form No: pi 3/99 Date: March 1999 Supersedes: n/a Company: Date: Address: City: State: Country: Contact: Phone: Fax: Required Information Pipeline Size: Wall Thickness(es): Minimum Bend Radius (indicate radius & degree of bend): Pipeline Length: Product Media (gas, oil, etc.): Flow Rate / Velocity: Side Connections (indicate tees barred/unbarred): Valve Type (Valves should be full bore/full opening. Indicate if valves have internal cavity): Pigging Application: Pigging History: TDW Pigging Products East 55th Place Tulsa, Oklahoma USA Fax: Toll Free: Phone: T.D. Williamson (U.K.) Ltd. Faraday Road, Dorcan Way, Swindon, Wiltshire ENGLAND SN3 5HF Fax: (44) 1-793/ Ph: (44) 1-793/603600

9 OptionAll Cleaning Pigs Sizes: 4- through 14-inch Bulletin No: Date: January 2007 Cross Indexing No: n/a Supersedes: (2/06) Options Description TDW's OptionAll Cleaning Pigs can be assembled into several configurations. TDW has assembled four standard configurations to meet most applications. Due to the unique design of the OptionAll Pig, customization is quickly accomplished with simple hand tools to achieve the best option for your pigging application. With the OptionAll Pig, you truly have an option. Features The OptionAll Cleaning Pig features TDW's Formula SI polyurethane which is designed to provide superior abrasion resistance. This new polyurethane means more miles and more runs at less cost. Non-wearing components are constructed of Ultra High Molecular Weight (UHMW) polyethylene to protect internal pipe and valve surfaces. OptionAll Cleaning Pigs Recessed steel bolt and locknut construction is designed to prevent breakup of the pig in the pipeline. Low-cost, long-wearing design provides users with the option to dispose of or rebuild the pig. Large-diameter conical cups are designed to seal in the thinnest of pipe walls. Lightweight design can be handled by one person and reduces shipping costs. All OptionAll Pigs are supplied with large eye rings, which are designed to allow the pig to be easily hooked and removed from the receiving trap. T.D.Williamson, Inc., is committed to providing you with the exact product to assist you in meeting the needs of your individual applications. The OptionAll Cleaning Pig is designed to fit many needs, using standard TDW components. Special configurations can be made to meet virtually any customer specification. Some of the possible special configurations are listed below: Pigs can be made shorter or longer. Pigs can have more or fewer cups and/ or discs in any arrangement. Pig bodies can be provided with cavities to house transmitters for tracking or locating purposes. Pigs cups and/or discs can be provided with bypass holes for maximum cleaning effectiveness. Cups and/or discs can be modified for very heavy wall pipe. Aluminum, slotted aluminum or steel gauging flanges can be provided. Brushes with stainless steel bristles. Pig cups and/or discs can be provided in Neoprene, Buna-N or Viton. USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

10 Configurations OptionAll Cleaning Pigs p2 2C-1BR Configuration A B C Size Weight A B C Inch (mm) Lbs (kg) Part Number Inch (mm) Inch (mm) Inch (mm) 4 (100) 3.0 (1.3) (197) 5.0 (127) 4.50 (114) 6 (150) 7.5 (3.4) (308) 8.31 (211) 6.62 (168) 8 (200) 13.5 (6.1) (390) (274) 8.62 (219) 10 (250) 26.0 (11.8) (525) (401) 10.6 (270) 12 (300) 32.0 (14.5) (562) (406) 12.6 (321) 14 (350) (16.5) (579) (409) 14.0 (356) 2C-1BR Configurations are designed to traverse 1.5 DR bends. 4C-2BR Configuration A B C Size Weight A B C Inch (mm) Lbs (kg) Part Number Inch (mm) Inch (mm) Inch (mm) 4 (100) 2.75 (1.2) (273) 8.00 (203) 4.50 (114) 6 (150) (4.7) (363) 10.5 (267) 6.62 (168) 8 (200) (9.0) (525) (409) 8.62 (219) 10 (250) (16.7) (584) (459) (270) 12 (300) (22.5) (722) (566) (321) 14 (350) (25.7) (740) (570) (356) 4C-2BR Configurations are designed to traverse 3.0 DR bends. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

11 Configurations OptionAll Cleaning Pigs p3 DCDC-2BR Configuration A B C Size Weight A B C Inch (mm) Lbs (kg) Part Number Inch (mm) Inch (mm) Inch (mm) 4 (100) 2.75 (1.2) (216) 6.00 (152) 4.50 (114) 6 (150) (4.7) (367) (273) 6.62 (168) 8 (200) (9.0) (497) (397) 8.62 (219) 10 (250) (16.7) (543) (490) (270) 12 (300) (22.5) (675) (565) (321) 14 (350) (25.7) (692) (583) (356) DCDC-2BR Configurations are designed to traverse 3.0 DR bends. 4D-2BR Configuration A B C Size Weight A B C Inch (mm) Lbs (kg) Part Number Inch (mm) Inch (mm) Inch (mm) 4 (100) 2.75 (1.3) (260) 6.50 (165) 4.31 (109) 6 (150) 9.75 (4.4) (381) 9.68 (246) 6.25 (159) 8 (200) (8.1) (498) (357) 8.38 (213) 10 (250) (15.5) (543) (395) (267) 12 (300) (18.5) (644) (490) (318) 14 (350) (21.7) (644) (490) (349) 4D-2BR Configurations are designed to traverse 3.0 DR bends. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

12 Ordering Information OptionAll Cleaning Pigs p4 Replacement Cups, Discs and Brushes Size Cup Weight Cup Disc Weight Disc Brush Weight Brush Inch (mm) Lbs (kg) Part Number Lbs (kg) Part Number Lbs (kg) Part Number 4 (100) 0.4 (0.2) (0.1) (0.25) (150) 1.2 (0.5) (0.4) (0.25) (200) 2.5 (1.1) (0.7) (0.5) (250) 3.7 (1.7) (1.1) (1.0) (300) 6.0 (2.7) (1.5) (1.5) (350) 8.0 (3.6) (1.8) (1.7) Bypass Hole Recommendations* Bypass Holes Size No. of Eql Sp Holes Diameter of Holes Inch mm Inch mm 4" " 10 6" " 13 8" " 13 10" " 16 12" " 19 14" " 19 * for approximately 3% bypass Cups and discs with bypass holes are available from the factory. Wood boring bits are recommended for drilling holes in urethane. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

13 VANTAGE V Cleaning Pig Sizes: 10-inch and larger Bulletin No: Date: February 2009 Cross Indexing No: n/a Supersedes: (2/05) Options DCDC-BR VANTAGE V Cleaning Pig with brushes (12-inch size shown) Description VANTAGE V Cleaning Pigs are multi-use pigs equipped with either scraper discs/cups, cups, brushes or blade cleaning elements. The VANTAGE V is offered in eight different cleaning configurations. All cups and discs are replaceable and can be interchanged or reconfigured. Features All 16- through 42-inch VANTAGE V Pigs are equipped with a bypass hole option, which allows you to create a jetting action to improve cleaning effectiveness. Bypass ports can be provided on 10- to 14-inch sizes if requested. This pig is rugged and easy to maintain. The conical cup features a large wear surface, a conical shape with a small bolt circle. The disc/cup configuration allows for additional cleaning. The disc adds additional support to the pig, increasing DCDC-BR VANTAGE V Cleaning Pig with brushes and urethane nose bumper shown. (20- inch size shown) the cup life. Cups and discs have excellent sealing capabilities and flexibility. The pig is designed to traverse 15 to 20 percent reductions due to anomalies in the pipe without damaging the pipe or pig. Cleaning elements include brushes to remove hard, crust-like deposits, urethane blades for removing soft, gummy deposits, scraper discs to clean both hard and soft internal deposits, and magnet kits to remove ferrous material. All blades, brushes and scraper discs provide 100 percent circumferential cleaning. The VANTAGE V pigs are equipped with nonmetallic bumpers to protect the bolts and prevent metal-to-metal contact during pigging operations. T.D. Williamson, Inc. is committed to providing you with the exact product to assist you with your individual needs. The VANTAGE V Cleaning Pig is offered in eight configurations. Two-cup and several disc/cup configurations can be provided. Available in sizes 10-inch and larger May be equipped with a magnet kit to remove ferrous debris. May be equipped with gauge plates at a specified diameter and configuration. May be equipped with an adapter plate on which to mount a pig tracking transmitter. May be equipped with removable bypass plugs (standard on 16-inch and larger) to obtain jet cleaning. May be converted to a batching/ displacement pig by removing the cleaning elements. RealSeal multi-lip cups are available for increased seal effectiveness and wear life. Close up of optional RealSeal Multi-Lip Cup RealSeal Multi-Lip Cup: Patented in the United States and in foreign countries. USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

14 Dimensions and Part Numbers VANTAGE V Cleaning Pigs p2 2CC Configurations The 2CC VANTAGE V Cleaning Pigs are recommended for light to medium cleaning and lines with 1.5 DR - 90 bends. A L 2CC Blade Configuration A L 2CC Brush Configuration 2CC-BL Blade Cleaning Pig 2CC-BR Brush Cleaning Pig 2CC (Blade or Brush) Dimensions Size Weight Weight A L Inch mm Part Number Lbs. Kg. Part Number Lbs. Kg Inch mm Inch mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Consult the factory for larger sizes. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

15 Replacement Parts VANTAGE p7 V Cleaning Pigs Replacement Cups/Discs Size Standard VANTAGE RealSeal Inch mm Conical Cups Conical Cups Disc for DCDC Pigs Scraper Seal Disc Guide/Support Disc Replacement Blades and Brushes Size Blade Brush Brush Holder Inch mm Lbs. Kg. Part Number Lbs. Kg. Part Number Lbs. Kg. Part Number / / / Consult the factory for parts or accessories not listed. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

16 Dimensions and Part Numbers VANTAGE V Cleaning Pigs p4 5D2CC Configuration The 5D2CC VANTAGE V Cleaning Pigs are recommended for medium to heavy cleaning. The 10- to 14-inch pigs will traverse 1.5 DR - 90 bends and 16-inches and larger will traverse 3.0 DR - 90 bends. This pig will traverse most long bowl check valves and fullopening wedge gate valves. B L A 5D2CC Blade Configuration B L A 5D2CC Brush Configuration 5D2CC-BL Blade Cleaning Pig 5D2CC-BR Brush Cleaning Pig 5D2CC (Blade or Brush) Dimensions Size Weight Weight A B L Inch mm Part Number Lbs. Kg. Part Number Lbs Kg. Inch mm Inch mm Inch mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Consult the factory for larger sizes. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

17 Dimensions and Part Numbers VANTAGE p5 V Cleaning Pigs DCDC Configurations The DCDC VANTAGE V Cleaning Pigs are recommended for medium to heavy cleaning. The 10- to 14-inch pigs will traverse 1.5 DR - 90 bends and 16-inches and larger will traverse 3.0 DR - 90 bends. This pig will traverse most long bowl check valves and fullopening wedge gate valves. B A L DCDC Blade Configuration B A L DCDC Brush Configuration DCDC-BL Blade Cleaning Pig DCDC-BR Brush Cleaning Pig DCD C (Blade or Brush) Dimensions Size Weight Weight A B L Inch mm Part Number Lbs. Kg. Part Number Lbs Kg. Inch mm Inch mm Inch mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Consult the factory for larger sizes. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

18 Specifications VANTAGE p6 V Cleaning Pigs VANTAGE Pigs Will Traverse Maximum Gate Valve Seat Ring Spacing Size 2CC DCDC 3D2CC 5D2CC Inch mm Inch mm Inch mm Inch mm Inch mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Consult the factory for parts or accessories not listed. Maximum Check Valve Bowl Length Size 2CC DCDC 3D2CC 5D2CC Inch mm Inch mm Inch mm Inch mm Inch mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Consult the factory for parts or accessories not listed. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

19 Dimensions and Part Numbers VANTAGE V Cleaning Pigs p3 3D2CC Configurations The 3D2CC VANTAGE V Cleaning Pigs are recommended for medium to heavy cleaning. The 10- to 14-inch pigs will traverse 1.5 DR - 90º bends and the 16-inches and larger will traverse 3.0 DR - 90º bends. This pig will traverse most long bowl check valves and full opening wedge gate valves. B L A 3D2CC Blade Configuration B L A 3D2CC Brush Configuration 3D2CC-BL Blade Cleaning Pig 3D2CC-BR Brush Cleaning Pig 3D2CC (Blade or Brush) Dimensions Size Weight Weight A B L Inch mm Part Number Lbs. Kg. Part Number Lbs Kg. Inch mm Inch mm Inch mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Consult the factory for larger sizes. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

20 p8 Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

21 PitBoss Cleaning Pig Sizes: 6-inch and larger Bulletin No: Date: January 2007 Cross Indexing No: n/a Supersedes: (2/99) Options T.D. Williamson, Inc., is commited to providing you with the exact product to assist you in planning, budgeting, and meeting the specifications for your individual application needs. To help you obtain the proper pig for your application, check to see if the selection is capable of traversing your particular pipeline components (bends, valves, tees, etc.) PitBoss Cleaning Pigs are available in sizes 6-inch (150 mm) and larger. PitBoss Cleaning Pigs are available in dual diameter configurations. 10-inch PitBoss Cleaning Pigs Description Features TDW's PitBoss Cleaning Pig is designed to remove soft to medium-hard deposits from internal pits while also serving as an excellent general purpose cleaning pig. It is essential to remove deposits from pits in order to allow corrosion inhibitors and biocides to work. Otherwise the deposits can shield the active corrosion, there by allowing the cell to continue its corrosive action. Each wire scraper acts independantly as both a spring (forcing itself out into the pit) and a scraper Pit cleaning wire brushes are designed to improve the effectiveness of corrosion inhibitors, thus reducing the risk of leaks due to internal corrosion. Brushes are designed to conform to the inside diameter of pipe, regardless of wall thickness, to effectively clean the pipe wall. 24-inch PitBoss Cleaning Pigs USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

22 Dimensions and Part Numbers PitBoss Cleaning Pigs p2 C A B C A B Sizes 16-inch & larger Sizes 6- through 14-inch Sizes 6-inch and larger Inches mm Wt./Lbs. Wt./Kg. Part Number A B C Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

23 FJR/JRN Cleaning Pigs Sizes: 2- through 6-inch Bulletin No: Date: January 2007 Cross Indexing No: n/a Supersedes: (1/99) Options* FJR Cleaning Pig 6" (150 mm) T. D. Williamson, Inc., is committed to providing you with the exact product to assist you in planning, budgeting, and meeting the specifications for your individual application needs. FJR and JRN Pigs are available in sizes 2" (50 mm) through 6" (150 mm). Cups are available in urethane, Buna-N, neoprene or Viton. The 6" size is also available with type HD urethane scraper cups. To help you obtain the proper pig for your application, check to see if the selection is capable of traversing your particular pipeline components (bends, valves, tees, etc.). Description Features Contamination buildup increases resistance to flow, which decreases pipeline efficiency. FJR and JRN Cleaning Pigs are used to improve and maintain all types of pipelines by removing contaminants and deposits in the pipe. They combine the ability to traverse sharp bends with maximum cleaning capabilities and long service. JRN Pigs and the flexible FJR Pigs come equipped with wire brushes and urethane cups. Both FJR and JRN Cleaning Pigs are built with TDW's urethane scraper cup, which is made of liquid-cast urethane, a high-strength, tough elastomer. Advantages of urethane cups include minimum swelling, exceptional resistance to hydrocarbons, light-weight, reduced blistering, and increased abrasion resistance. TDW steel wire brushes come standard, made from high-carbon, tempered steel, and are designed to remove hard deposits. Urethane cups operate in temperatures ranging from -20 F to 200 F (-29 C to 93 C). JRN Cleaning Pig 6" (150 mm) USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

24 Dimensions and Part Numbers FJR and JRN Cleaning Pigs p2 Sizes 2" through 6" FJR Pigs JRN Pigs Inches mm Wt./Lbs. Wt./kg Part Number Wt./Lbs. Wt./kg Part Number / / / / Dimensions FJR Pigs JRN Pigs A B L A L Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm / / / / / / / / / / / / / / / / /8 238 Parts and Descriptions FJR Pigs JRN Pigs Item Description 2" 3", 4" 6" Item Description 2" 3", 4" 6" 1 Body Body Spacer Spacer Flange Brush Washer Flange Brush Nut, Esna Urethane Cup Nose and Rear Bumper Cotter Pin Urethane Cup Jam Nut Bypass Plug Nose and Rear Bumper Cotter Pin Name Plate Name Plate FJR and JRN Pigs Will Traverse: minimum bend radius maximum gate valve seat ring spacing maximum check valve length of bowl Size FJR Pigs JRN Pigs FJR Pigs JRN Pigs Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm / / / / / / / / / /2 89 FJR Pigs will traverse full size branch openings. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

25 Dimensions and Part Numbers Cleaning Pig Configurations FJR Cleaning Pig 2" (50 mm) p3 L A B FJR Cleaning Pig 3" (80 mm) and 4" (100 mm) L A B FJR Cleaning Pig 6" (150 mm) L A B JRN Cleaning Pig 2" (50 mm), 3" (80 mm), 4" (100 mm) L A JRN Cleaning Pig 6" (150 mm) L A Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

26 p4 Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

27 VANTAGE + Pigs Sizes: 2- through 14-inch Bulletin No: Date: January 2007 Cross Indexing No: n/a Supersedes: (2/01) Options 3D2CC-BR PIG 10" through 14" VANTAGE+ 3CC Pigs are available in sizes 2" (50 mm) through 14" (350 mm). The 3D2CC Pigs are offered in sizes 4 (100 mm) through 14 (350 mm). The 10" (250 mm) through 14" (350 mm) VANTAGE+ Cleaning Pigs offer spring-loaded, wear-compensating cleaning elements. This size range may be equipped with steel wire brush or urethane blade cleaning elements. To help you obtain the proper pig for your application, check to see if the selection is capable of traversing your particular pipeline components (bends, valves, tees, etc.). Brush Cleaning Pig 2CC-BR, 10" through 14" 3CC-B Pig 2" through 14" Description Features VANTAGE + Pigs are multi-use pigs. Two basic body combinations are designed to meet most pigging applications. The basic unit serves as a batching, displacement or cleaning pig. The VANTAGE+ Pig is lightweight, easy to assemble and maintain. The one-piece, moldeddesign body is economical, durable and provides long service. The cup and disc configuration is flexible enough to traverse 20 percent reductions in the pipe, due to buckles, dents, or flattening. Recommended operating temperature is -20 F to 200 F. TDW recommends brush cleaning pigs for removing hard, internal pipe deposits such as mill scale, crust, and calcium deposits. Blade cleaning pigs are recommended for thick, soft, internal deposits such as wax, paraffin, sludge, and mud. VANTAGE+ Pigs are made of liquid-cast urethane, a high-strength, tough elastomer. Advantages of urethane include minimum swelling, exceptional resistance to hydrocarbons, light weight, reduced blistering, and increased abrasion resistance. TDW steel wire brushes, designed to remove hard deposits, are made from high-carbon, tempered steel. The VANTAGE+ is offered in the 2CC, 3CC or 3D2CC configurations. The 2CC and 3D2CC may be converted to Brush or Blade cleaning pigs in sizes 10 and larger. Patented in the United States and in foreign countries. USA: England: (44) Blade Cleaning Pig 2CC-BL, 10" through 14" Brush Cleaning Pig 3D2CC-BR, 10 through 14 Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

28 Dimensions and Part Numbers VANTAGE + Pigs p2 Sizes 2" through 14" Brush Cleaning Pigs 2CC-BR Brush Cleaning Pigs 3D2CC-BR Blade Cleaning Pigs 2CC-BL Inches mm Wt./Lbs. Wt./kg Part Number Wt./Lbs. Wt./kg Part Number Wt./Lbs. Wt./kg Part Number N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Blade Cleaning Pigs 3D2CC-BL Batching Pigs 3CC-B Batching Pigs 3D2CC-B Inches mm Wt./Lbs. Wt./kg Part Number Wt./Lbs. Wt./kg Part Number Wt./Lbs. Wt./kg Part Number 2 50 N/A N/A N/A N/A N/A N/A 3 75 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Dimensions All Types Allowable ID Variations Size A B C L-Batching L-Cleaning L-(3D2CC) minimum maximum Inches mm Inches mm Inches mm Inches mm Inches mm Inces mm Inches mm Inches mm Inches mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /2 343 Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

29 Dimensions and Parts VANTAGE + Pigs p3 A L Batching Displacement 2" through 14" One-Piece Urethane Type 3CC-B C L Batching Displacement 4" through 14" Type 3D2CC-B B L Cleaning Pig 6" and 8" Type 2CC-BR B L Cleaning Pig 2" and 4" Type 2CC-BR & L Cleaning Pig + Brushes 10" and 14" Type 2CC-BR C L Cleaning Pig + Brushes 10" and 14" Type 3D2CC-BR C C L Cleaning Pig + Blades 10" and 14" Type 2CC-BL C L Cleaning Pig + Blades 10" and 14" Type 3D2CC-BL Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

30 Specifications VANTAGE + Pigs p4 VANTAGE + Pigs Will Traverse: 2CC-BR Cleaning Batching 2CC-BR, 2CC-BL & 3CC-B 2CC-BL 2CC-BL & 2CC-BR 3CC-B Cleaning Batching Nominal 3CC-B Max. Gate Valve Max. Gate Valve Max. Check Valve Max. Check Valve Size Min. Bend Radius Seat Ring Spacing Seat Ring Spacing Length of Bowl Length of Bowl Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm / / / / / / / / / / / / / / / / / / / / / / / / / / D2CC-B, BL, BR 3D2CC-B, BL, BR Nominal 3D2CC-B 3D2CC-BL, BR Max. Gate Valve Max. Check Valve Size Min. Bend Radius Seat Ring Spacing Length of Bowl Inches mm Inches mm Inches mm Inches mm Inches mm N/A N/A 2-5/ / N/A N/A 4-3/ / N/A N/A 5-1/ / / / / / / All VANTAGE + Pigs will traverse full-size, branch openings. Guide bars are necessary across opening when branch is 75% or more of pipe ID. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

31 Foam Pigs Sizes: 2- through 24-inch Bulletin No: Date: January 2007 Cross Indexing No: n/a Supersedes: (2/00) Options Description REDSKIN Foam Pigs The TDW Foam Pig Line is an economical and effective pig for several applications. Their resilience enables them to negotiate short radius elbows, miter bends, and major diameter reductions. The Foam Pig Line is used for light cleaning, air removal prior to hydrostatic testing, water evacuation and drying. One version is bidirectional, which allows the pig to run in either direction. The TDW Foam Pig Line is offered in five different configurations: REDSKIN Swab Pig (RS-7) REDSKIN Bristle Pig (RBR-7) REDSKIN RoughRider Pig (RRR-7) REDSKIN Bidirectional Pig (RSBD-7) WHITESKIN Pig (WS-2) The WHITESKIN Pig is available in sizes 2 through 42 and is recommended for shorter runs for air or water service. Consult the factory for other WHITESKIN Pig applications. Features Each REDSKIN pig is made from TDW s tough, abrasion-resistant polyurethane foam with honeycomb surface texture, which effectively scrapes and wipes the pipeline wall. Wire brushes with bypass grooves provide full pipe coverage for effective cleaning and removal of hard deposits. The urethane cleaning wrap with bypass groove is effective for removing soft deposits such as paraffin. This increases the throughput, reduces pumping costs, and helps prevent corrosion. The oversized diameter ensures a tight fit and effective seal regardless of pipe wall thickness. The REDSKIN Pig is especially effective for line filling and dewatering associated with hydrostatic testing. The TDW Foam Pigs are packaged in plastic bags and shipped in cardboard boxes which extends shelf life in high-temperature, highhumidity regions. T. D. Williamson, Inc., is committed to providing you with the exact product to assist you in planning, budgeting and meeting the specifications for your individual application needs. The following options are available. Special handling ropes may be added. Transmitters may be mounted. Foam spheres are available. Sizes range from 2 through 24 for REDSKIN Pigs. Sizes range from 2 through 42 for WHITESKIN Pigs. Wire brushes with bypass grooves provide full pipe coverage for effective cleaning and removal of hard deposits. Urethane cleaning wrap with bypass groove is effective for removing soft deposits such as paraffin. In addition to the REDSKIN and WHITESKIN, TDW can provide coated, crisscross, bare swabs and bristlecoated foam pigs in sizes 2-48 and in varying densities. USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

32 Dimensions and Part Numbers Foam Pigs p2 Configurations B A D Size D A B Inches mm Inches mm Inches mm Inches mm Swab Bidirectional Part Numbers Size Weight Weight Swab Bristle RoughRider Bidirectional WHITESKIN Inches mm Lbs. Kg. Lbs. Kg. (RS-7) (RBR-7) (RRR-7) (RSBD-7) (WS-2) Consult the factory for larger sizes. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

33 WCK Cleaning Pigs Sizes: 6- through 14-inch Bulletin No: Date: May 2010 Cross Indexing No: n/a Supersedes: (1/07) Options WCK3 Cleaning Pig WCK-12 and WCK-3 Pigs are available in sizes 6" (150 mm) through 14" (350 mm). WCK-12DD and WCK-3DD Pigs are available in sizes 6" x 8" (150 mm x 200 mm) through 14" x 16" (350 mm x 400 mm). WCK Pigs are available with heavy duty type urethane scraper cups. Cups and discs are available in Buna-N, Neoprene and Viton. Urethane plow blades are available in place of wire brushes. To help you obtain the proper pig for your application, check to see if the selection is capable of traversing your particular pipeline components (bends, valves, tees, etc.). Description Features WCK3DD Contamination buildup increases resistance to flow, which decreases pipeline efficiency. WCK Cleaning Pigs are used to improve and maintain all types of pipelines by removing contaminants and deposits in the pipe. Dual-diameter (DD) WCK Pigs clean multiple sizes of pipe in one run. Both types have tempered steel springs that force the brushes against the pipe and flex inward to avoid obstructions. WCK Pigs come equipped with tempered steel wire brushes and urethane cups. The dual diameter WCK Pigs for cleaning multiple sizes of pipe are equipped with steel wire brushes and discs. An outlet port at the front end of the WCK Pigs provides fluid bypass to prevent piling of loosened material. For severe deposits, extra bypass holes can be drilled through the cups. WCK Cleaning Pigs are built with TDW's urethane scraper cups or discs, which are made of liquid-cast urethane, a high-strength, tough elastomer. Advantages of urethane cups and discs include minimum swelling, exceptional resistance to hydrocarbons, lightweight, reduced blistering, and increased abrasion resistance. WCK-DD Pigs are built with a collapsible urethane disk. Both types of pigs are built with TDW steel wire brushes, made from high-carbon, tempered steel. Cups and discs operate in temperatures ranging from -20 F to 200 F (-29 C to 93 C). USA: England: (44) WCK12 WCK3-Blades Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

34 Dimensions and Part Numbers WCK Cleaning Pigs p2 Sizes 6" through 14" WCK-12 Pigs WCK-3 Pigs Inches mm Wt./Lbs. Wt./Kg. Part Number Wt./Lbs. Wt./Kg. Part Number WCK-12DD Pigs WCK-3DD Pigs 6 x x x x x x x x x x x x / x x Components Item Description WCK-12 WCK-3 WCK-12DD WCK-3DD 1 Body Flange Brush * 16* 5 Holder Spacer Spring Assembly Screw Body Nut Nose and Rear Bumper Spring Liner Coupler Spring Disc, Slotted Urethane Cup Bypass Plug Coupler Pin Coupler Block Cotter Pin Disc, Solid Guide Pin Cotter Pin ESNA Nut Washer Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

35 Dimensions and Part Numbers WCK Cleaning Pigs p3 Dimensions WCK-12 WCK-3 A L A B L Inches mm Inches mm Inches mm Inches mm Inches mm Inches mm / / / / / / / / / / / / / / / / / / / / / / / / WCK-12DD WCK-3DD A L A L Inches mm Inches mm Inches mm Inches mm Inches mm 6 x x / / / / x x / / / / x x / / / / x x / / / / x x / / / / x x / / / / x x / / / / Replacement Parts WCK-12, WCK-3, WCK-12DD, and WCK-3DD Pigs Spring Liner Guide Fins Inches mm Inches mm Part Number Wt./Lbs. Wt./Kg. Part Number x x / x x / x x / x x / x x / x x / x x / Replacement Parts WCK-12 Pigs WCK-3 Pigs Brush Holder Spring Assembly Inches mm Wt./Lbs. Wt./Kg. Part Number Wt./Lbs. Wt./Kg. Part Number / / / / / / / / / / WCK-12DD Pigs WCK-3DD Pigs 6 x x 200 1/ / x x 250 3/ / x x 300 3/ / x x / x x / x x / x x / Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

36 Specifications WCK Cleaning Pigs p4 WCK-12 Pigs Will Traverse: Pipe bends with 6' (1829 mm) radius. Miter bends up to 7-1/2 and 1/2" (13 mm) maximum wall thickness. Minimum straight length between miter bends must equal pig length. All round, full-opening gate and plug valves. For check valves, consult the factory. Tees with full-diameter branch at 90 or 45 to pipeline. Guide bars are recommended across opening when branch is 75% of pipe ID. WCK-3 Pigs Will Traverse: 1-1/2 D radius welding ells. Miter bends up to 30 and line pipe with 1/2" (13 mm) maximum wall thickness. Six-inch (150 mm) size limited to 45, 1-1/2 D radius bends; will not pass 90 bends. All standard round opening gate and plug valves with a seat ring spacing of 5' 1/4" (133 mm) or less. Full-diameter side openings at 90 and 45 to pipeline. WCK-12DD & WCK-3DD Pigs Will Traverse: WCK-12DD minimum bend radius Inches mm feet/inches mm feet/inches mm 6 x x 200 6' in 6" line 1829 in 150 line 3' in 8" line 914 in 200 line 8 x x 250 8' in 8" line 2438 in 200 line 5' in 10" line 1524 in 250 line 8 x x 300 8' in 8" line 2438 in 200 line 3' in 12" line 914 in 300 line 10 x x 300 8' in 10" line 2438 in 250 line 5' in 14" line 1524 in 300 line 10 x x 350 8' in 10" line 2438 in 250 line 4' in 14" line 1219 in 350 line 12 x x ' in 12" pipe 3048 in 300 pipe 5' in 16" line 1524 in 400 line 14 x x 400 8' in 14" pipe 2438 in 350 pipe 5' in 16" line 1524 in 400 line WCK-3DD minimum bend radius 6 x x " in 6" line 610 in 150 line 12" in 8" line 305 in 200 line 8 x x " in 8" line 610 in 200 line 15" in 10" line 381 in 250 line 8 x x " in 8" line 610 in 200 line 18" in 12" line 457 in 300 line 10 x x " in 10" line 762 in 250 line 18" in 12" line 457 in 300 line 10 x x " in 10" line 762 in 250 line 21" in 14" line 533 in 350 line 12 x x " in 12" line 610 in 300 line 24" in 16" line 610 in 400 line 14 x x " in 14" pipe 533 in 350 line 24" in 16" line 610 in 400 line maximum gate valve seat ring spacing maximum check valve length of bowl Pig Size WCK-12 WCK-3 WCK-12DD WCK-3DD Inches mm Inches mm Inches mm Inches mm Inches mm 6 x x / / x x " / x x " / x x /2" x x /2" / x x /2" / x x /2" / Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

37 Configurations WCK Cleaning Pigs p5 WCK-12 Cleaning Pig WCK-3 Cleaning Pig L A L A B WCK-12DD Cleaning Pig L A WCK-3DD Cleaning Pig L A Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

38 p6 Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

39 Pencil Brush Cleaning Pig Sizes: 4- to 42-inches Bulletin No: Version: Cross Indexing No: n/a Supersedes: ( ) Options Description Pencil Brush Cleaning Pigs are heavy duty, aggressive cleaning pigs equipped with a steel body, spring steel wire brushes and polyurethane bumpers and discs. There are three standard configurations as shown above. The 5D-1BR will traverse a 1.5 DR bend while the 4D-2BR and 4D-2BR PitBoss will traverse 3 DR or larger bends. Both the Pencil and PitBoss brushes (in the case of the 4D-2BR PitBoss Pencil Brush Pig) are very effective at removal of black powder and cleaning deposits from internal pits. Features All Pencil Brush Pigs are equipped with removable bypass plugs, which provide a jetting action to improve cleaning effectiveness. This pig is rugged and easy to maintain. The brushes and discs provide excellent support to the pig, increasing the life of the discs. All brushes and scraper discs provide 100 percent circumferential cleaning. Brushes are designed to conform to the inside diameter of pipe, thus ensuring effective cleaning of the pipe wall. The pigs are equipped with nonmetallic bumpers to protect the bolts and prevent metal-to-metal contact during pigging operations. T.D. Williamson, Inc. is committed to providing you with the exact product to assist you with your individual needs. The Pencil Brush Cleaning Pig is offered in three standard configurations and is available in sizes 4-inch and larger. Special configurations are available to meet virtually any customer specification. Some of the special configurations are listed below. Pigs can be made shorter or longer. Pigs can have more or fewer discs in any arrangement. Pigs can have more brushes in any arrangement. Pencil Brushes can be provided with a higher density pattern. Pigs may be equipped with a Magnetic Cleaning assembly to remove ferrous debris. Pigs may be equipped with a gauge plate. Pigs may be equipped with an adapter plate on which to mount a pig tracking transmitter. Discs and brushes can be modified for very heavy wall pipe. Pigs may be equipped with an adapter plate on which to mount a "Trip Magnet" for detecting pig passage on a Non-Intrusive Pig Passage Indicator. The discs can be provided with bypass holes in order to achieve increased bypass. Patented in the United States and in other countries. ISO 9001 Certified North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2016 All rights reserved. T.D. Williamson, Inc.

40 Dimensions and Part Numbers Pencil Brush Cleaning Pig p2 5D-1BR Pencil Brush Pig A B A B Inch mm Wt./Lb. Wt./Kg Part Number Inch mm Inch mm North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2016 All rights reserved. T.D. Williamson, Inc.

41 Dimensions and Part Numbers Pencil Brush Cleaning Pig p3 4D-2BR Pencil Brush Pig A B A B Inch mm Wt./Lb. Wt./Kg Part Number Inch mm Inch mm North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2016 All rights reserved. T.D. Williamson, Inc.

42 Dimensions and Part Numbers Pencil Brush Cleaning Pig p4 4D-2BR PitBoss Pencil Brush Pig A B A B Inch mm Wt./Lb. Wt./Kg Part Number Inch mm Inches mm North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2016 All rights reserved. T.D. Williamson, Inc.

43 Dimensions and Part Numbers Pencil Brush Cleaning Pig p5 Replacement Parts Size Guide Disc Seal Disc Standard Pencil Brush High Density Pencil Brush PitBoss Brush N.A North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2016 All rights reserved. T.D. Williamson, Inc.

44 p6 North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2016 All rights reserved. T.D. Williamson, Inc.

45 TDW Pigging Products TDW Pigs Application Data Form To help us better serve you in providing the right TDW products for your piping system requirements, please complete this form and return to TDW by mailing or by fax (see below). Form No: pi 3/99 Date: March 1999 Supersedes: n/a Company: Date: Address: City: State: Country: Contact: Phone: Fax: Required Information Pipeline Size: Wall Thickness(es): Minimum Bend Radius (indicate radius & degree of bend): Pipeline Length: Product Media (gas, oil, etc.): Flow Rate / Velocity: Side Connections (indicate tees barred/unbarred): Valve Type (Valves should be full bore/full opening. Indicate if valves have internal cavity): Pigging Application: Pigging History: TDW Pigging Products East 55th Place Tulsa, Oklahoma USA Fax: Toll Free: Phone: T.D. Williamson (U.K.) Ltd. Faraday Road, Dorcan Way, Swindon, Wiltshire ENGLAND SN3 5HF Fax: (44) 1-793/ Ph: (44) 1-793/603600

46

47 OptionAll Sizes: 4- to 14-inch Batching Pigs Bulletin No: Version: Cross Indexing No: N/A Supersedes: ( ) Description TDW's OptionAll Batching Pigs can be assembled into several configurations. TDW has assembled seven standard configurations to meet most applications. Due to the unique design of the OptionAll Pig, customization is quickly accomplished with simple hand tools to achieve the best option for your pigging application. The OptionAll Batching Pig is designed for light cleaning, line filling and dewatering, batch separation and liquid removal. The replaceable cups and discs make special configurations easy and its low cost gives users the option to dispose of or rebuild the pig after hard use. Features The OptionAll Batching Pig features TDW's Formula SI polyurethane which is designed to provide superior abrasion resistance. This new polyurethane means more miles and more runs at less cost. Non-wearing components are constructed of Ultra High Molecular Weight (UHMW) polyethylene to protect internal pipe and valve surfaces. Recessed steel bolt and locknut construction is designed to prevent breakup of the pig in the pipeline. Low-cost, long-wearing design provides users with the option to dispose of or to rebuild the pig. Large-diameter conical cups are designed to seal in the thinnest of pipe walls. The OptionAll Pig is designed to traverse 1.5 DR bends (unless otherwise noted), check valves and full-size tees designed for pig passage. Lightweight design can be handled by one person and reduces shipping costs. All OptionAll Pigs are supplied with large eye rings, which are designed to allow the pig to be easily hooked and removed from the receiving trap. Options T.D.Williamson, Inc. is committed to providing you with the exact product to assist you in meeting the needs of your individual applications. The OptionAll Batching Pig is designed to fit many needs, using standard TDW components. Special configurations can be made to meet virtually any customer specification. Some of the possible special configurations are listed below: Pigs can be made shorter or longer. Pigs can have more or fewer cups and/or discs in any arrangement. Pig bodies can be provided with cavities to house transmitters for tracking or locating purposes. Pig cups and/or discs can be provided with bypass holes for maximum cleaning effectiveness. Cups and/or discs can be modified for extra heavy wall pipe. Aluminum, slotted aluminum or steel gauging flanges can be provided. Pig cups and/or discs can be provided in Neoprene, Buna-N, or Viton. Patented in the United States and in other countries. ISO 9001 Certified North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2016 All rights reserved. T.D. Williamson, Inc.

48 Configurations OptionAll Batching Pigs p2 2C Configuration A B C 2C configurations are recommended for light cleaning, line filling and dewatering, batch separation, and liquid removal. They are normally used in pipelines up to 50 miles (80 km) in length. (For longer runs, a 3C or 4C configuration would be recommended. For operating pipelines, a 4C or DCDC is recommended.) Size Weight A B C Inch (mm) Lb. (Kg) Part Number Inch (mm) Inch (mm) Inch (mm) 4 (100) 2.0 (0.9) (203) 6.25 (159) 4.50 (114) 6 (150) 5.8 (2.6) (319) 9.94 (252) 6.62 (168) 8 (200) 12 (5.4) (430) 13.8 (350) 8.62 (219) 10 (250) 19 (8.6) (489) 15.8 (401) 10.6 (270) 12 (300) 26 (12) (608) 19.5 (494) 12.6 (321) 14 (350) 30 (14) (625) 19.6 (498) 14.0 (356) 3C Configuration A B C 3C configurations are recommended for light cleaning, line filling and dewatering, batch separation and liquid removal. They are normally used in pipelines up to 100 miles (161 km) in length. (For longer runs, a 4C configuration would be recommended. For operating pipelines, a 4C or DCDC configuration is recommended.) Size Weight A B C Inch (mm) Lb. (Kg) Part Number Inch (mm) Inch (mm) Inch (mm) 4 (100) 4.8 (2.2) (213) 6.62 (168) 4.50 (114) 6 (150) 6.5 (2.9) (332) 10.4 (265) 6.62 (168) 8 (200) 14 (6.4) (441) 14.2 (361) 8.62 (219) 10 (250) 22 (10) (500) 16.2 (412) 10.6 (270) 12 (300) 32 (15) (622) 20.0 (509) 12.6 (321) 14 (350) 38 (17) (640) 20.2 (513) 14.0 (356) North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2016 All rights reserved. T.D. Williamson, Inc.

49 Configurations OptionAll Batching Pigs p3 4C Configuration A B C 4C configurations are recommended for light cleaning, line filling and dewatering, batch separation and liquid removal in pipelines of all lengths. Size Weight A B C Inch (mm) Lb. (Kg) Part Number Inch (mm) Inch (mm) Inch (mm) 4 (100) 2.7 (1.2) (222) 7.00 (178) 4.50 (114) 6 (150) 8.0 (3.6) (344) 10.9 (278) 6.62 (168) 8 (200) 16 (7.3) (452) 14.7 (372) 8.62 (219) 10 (250) 27 (12) (511) 16.7 (423) 10.6 (270) 12 (300) 38 (17) (637) 20.6 (523) 12.6 (321) 14 (350) 46 (21) (654) 20.8 (527) 14.0 (356) DCDC Configuration A B C DCDC configurations are recommended for medium-duty cleaning in crude oil, natural gas and refined products pipelines of all lengths. Discs are effective in removing loose solids and soft paraffin buildups from pipe walls. (A bypass option is recommended if a significant amount of solids is expected.) Size Weight A B C Inch (mm) Lb. (Kg) Part Number Inch (mm) Inch (mm) Inch (mm) 4 (100) 2.2 (1.0) (222) 7.25 (184) 4.50 (114) 6 (150) 6.9 (3.1) (348) 11.7 (297) 6.62 (168) 8 (200) 13 (5.9) (424) 14.7 (373) 8.62 (219) 10 (250) 22 (10) (470) 16.4 (416) 10.6 (270) 12 (300) 31 (14) (589) 21.0 (535) 12.6 (321) 14 (350) 36 (16) (607) 21.8 (552) 14.0 (356) North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2016 All rights reserved. T.D. Williamson, Inc.

50 Configurations OptionAll Batching Pigs p4 4D Configuration A B C 4D configurations are recommended for bi-directional applications in which the pig has to be run in two directions before being removed from the line. They are normally used for line filling-testing-dewatering applications in lines up to 40 miles (65 km) in length. Size Weight A B C Inch (mm) Lb. (Kg) Part Number Inch (mm) Inch (mm) Inch(mm) 4 (100) 2.0 (0.9) (241) 6.75 (171) 4.31 (110) 6 (150) 6.7 (3.0) (378) 11.2 (286) 6.25 (159) 8 (200) 12 (5.4) (476) 15.1 (384) 8.38 (213) 10 (250) 22 (10) (533) 17.1 (435) 10.5 (267) 12 (300) 31 (14) (622) 20.6 (524) 12.5 (318) 14 (350) 32 (15) (622) 20.6 (524) 13.8 (349) 6D Configuration A B C 6D configurations are recommended for bi-directional applications in which the pig has to be run in two directions before being removed from the line. They are normally used for line filling-testing-dewatering applications in lines up to 60 miles (97 km) in length. Size Weight A B C Inch (mm) Lb. (Kg.) Part Number Inch (mm) Inch (mm) Inch (mm) 4 (100) 2.1 (1.0) (235) 6.50 (165) 4.31 (110) 6 (150) 7.9 (3.6) (381) 11.4 (289) 6.25 (159) 8 (200) 15 (6.8) (444) 13.9 (352) 8.38 (213) 10 (250) 25 (11) (540) 17.4 (441) 10.5 (267) 12 (300) 36 (16) (629) 20.9 (530) 12.5 (318) 14 (350) 39 (18) (629) 20.9 (530) 13.8 (349) North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2016 All rights reserved. T.D. Williamson, Inc.

51 Configurations OptionAll Batching Pigs p5 DD Configuration A B C D Size Weight A B C D Min Bend Inch (mm) Lb. (Kg.) Part Number Inch (mm) Inch (mm) Inch (mm) Inch (mm) Radius (in.) 6x8 (150x200) 10 (4.5) (406) (327) 8.25 (210) 6.25 (159) x10 (150x250) 13.3 (6.0) (607) (505) (260) 8.38 (213) x12 (150x300) 14.0 (6.3) (607) (505) (311) 8.38 (213) x12 (250x300) 22.5 (10.2) (559) (473) (311) (267) x14 (250x350) 24.0 (10.8) (559) (473) (343) (267) x14 (300x350) 26.3 (12.7) (559) (473) (343) (318) Dual diameter configurations are recommended for applications in which the pig has to run in multiple sizes of pipe in one run. North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2016 All rights reserved. T.D. Williamson, Inc.

52 Ordering Information OptionAll Batching Pigs p6 Replacement Cups and Discs Size Cup Weight Cup Disc Weight Disc Inch (mm) Lb. (Kg.) Part Number Lb. (Kg.) Part Number 4 (100) 0.4 (0.2) (0.1) (150) 1.2 (0.5) (0.4) (200) 2.5 (1.1) (0.7) (250) 3.7 (1.7) (1.1) (300) 6.0 (2.7) (1.5) (350) 8.0 (3.6) (1.8) Bypass Hole Recommendations* Bypass Holes Size No. of Eql Sp Holes Diameter of Holes 4 in. (100 mm) 4.37 in. (10mm) 6 in. (150 mm) 6.50 in. (13mm) 8 in. (200 mm) 8.50 in. (13mm) 10 in. (250 mm) 8.63 in. (16mm) 12 in. (300 mm) 8.75 in. (19mm) 14 in. (350 mm) 8.75 in. (19mm) * for approximately 3% bypass Cups and discs with bypass holes are available from the factory. Wood boring bits are recommended for drilling holes in urethane. North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2016 All rights reserved. T.D. Williamson, Inc.

53 VANTAGE V Batching Pig Sizes: 10-inch and larger Bulletin No: Date: January 2007 Cross Indexing No: n/a Supersedes: (4/04) Options 3D2CC VANTAGE V Batching Pig with RealSeal Cups (10-inch size shown) Description VANTAGE V Batching Pigs are multi-use pigs designed for batching, displacing and light cleaning of pipelines 10-inch and larger. Two- and four-cup configurations can be provided, as well as a disc/ cup configuration. The basic two-cup configuration will satisfy most new construction batching/displacing applications. A four-cup or disc/cup design is recommended for: Batching products with critical interface contamination points Displacing liquids on excessively long runs Traversing long-bowl checks and wedge gate valves. The conical cup features a large wear surface, a cone shape and a small bolt circle. Cups and discs provide excellent sealing capabilities and flexibility. The pig is designed to traverse 20 percent reductions due to anomalies in the pipe without damaging the pipe or pig. 5D2CC VANTAGE V Batching Pig (12-inch size shown) Features The disc/cup configuration allows for additional batching and light cleaning. The disc also adds support to the pig, increasing the cup life. All cups and discs are replaceable and can be interchanged or reconfigured. The VANTAGE V Batching Pig is rugged and easy to maintain. It features a consistent design throughout the size range and is available in several different standard configurations to meet most pigging applications. The VANTAGE V Pigs are equipped with nonmetallic bumpers to protect the bolts and prevent metal to metal contact during pigging operations. T.D. Williamson, Inc., is committed to providing you with the exact product to assist you in meeting your individual needs.the VANTAGE V Batching Pig is offered in several configurations. Two- or four-cup and disc-cup configurations can be provided. It is available in sizes 10-inch and larger. It may be equipped with a magnet kit to remove ferrous debris. It may be equipped with an adapter plate on which to mount a pig tracking transmitter. It may be equipped with dual diameter cups. RealSeal Multi-Lip cups are available for increased seal effectiveness and wear life. RealSeal Multi-Lip Cup: Patented in the United States and in foreign countries. USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

54 Dimensions and Part Numbers VANTAGE V Batching Pigs p2 2CC Configuration The 2CC VANTAGE V Batching Pigs are recommended for light to medium batching and in lines with 1.5 DR - 90 bends. L A Allowable Pipe ID Variations Size Weight Minimum Maximum A L Inch mm Part Number Lbs. Kg. Inch mm Inch mm Inch mm Inch mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Consult the factory for larger sizes. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

55 Dimensions and Part Numbers VANTAGE V Batching Pigs p3 4CC Configuration The 4CC VANTAGE V Batching Pigs are recommended for medium to heavy batching and lines with 1.5 DR - 90 bends. This pig will traverse most long-bowl check valves and full-opening wedge gate valves. B L A Allowable Pipe ID Variations Size Weight Minimum Maximum A B L Inch mm Part Number Lbs. Kg. Inch mm Inch mm Inch mm Inch mm Inch mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Consult the factory for larger sizes. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

56 Dimensions and Part Numbers VANTAGE V Batching Pigs p4 The DCDC VANTAGE V Batching Pigs are recommended for medium to heavy batching. The pigs will traverse 1.5 DR - 90 bends. This pig will traverse most long bowl check valves and full-opening wedge gate valves. B L A DCDC Configuration Allowable Pipe ID Variations Size Weight Minimum Maximum A B L Inch mm Part Number Lbs. Kg. Inch mm Inch mm Inch mm Inch mm Inch mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Consult the factory for larger sizes. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

57 Dimensions and Part Numbers VANTAGE p5 V Batching Pigs 3D2CC Configuration The 3D2CC VANTAGE V Batching Pigs are recommended for medium to heavy batching and lines with 1.5 DR - 90 bends. This pig will traverse most long-bowl check valves and full-opening wedge gate valves. B L A Allowable Pipe ID Variations Size Weight Minimum Maximum A B L Inch mm Part Number Lbs. Kg. Inch mm Inch mm Inch mm Inch mm Inch mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Consult the factory for larger sizes. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

58 Dimensions and Part Numbers VANTAGE p6 V Batching Pigs 5D2CC Configuration The 5D2CC VANTAGE V Batching Pigs are recommended for medium to heavy batching of lines with 1.5 DR - 90 bends. This pig will traverse most long-bowl check valves and fullopening wedge gate valves. B L A Allowable Pipe ID Variations Size Weight Minimum Maximum A B L Inch mm Part Number Lbs. Kg. Inch mm Inch mm Inch mm Inch mm Inch mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Consult the factory for larger sizes. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

59 Specifications VANTAGE p7 V Batching Pigs VANTAGE Pigs Will Traverse Maximum Gate Valve Seat Ring Spacing Size 2CC 4CC DCDC 3D2CC 5D2CC Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Consult the factory for parts or accessories not listed. Maximum Check Valve Bowl Length Size 2CC 4CC DCDC 3D2CC 5D2CC Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / Consult the factory for parts or accessories not listed. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

60 Replacement Parts VANTAGE p8 V Batching Pigs Replacement Cups/Discs Size Standard VANTAGE RealSeal Inch mm Conical Cups Conical Cups Discs for DCDC pigs Scraper Seal Disc Guide/Support Disc Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

61 BiDirectionAll Pig Sizes: 4- through 60-inch Bulletin No: Date: January 2007 Cross Indexing No: n/a Supersedes: (2/99) Options BiDirectionAll Pig Description TDW's BiDirectionAll Pig is designed to be used in pipeline construction during the hydrostatic test phase for air or water displacement applications. This pig is bidirectional, which allows the pig to run in either direction. It is designed to allow the user to fill the line with hydro test water and then displace the water without having to remove the pig. It can be used as a bidirectional cleaning pig by adding optional brushes. BiDirectionAll Pig with optional brush wraps Features Each pig is equipped with six discs. The lead and trailing discs are the guide/support discs, which provide support to the pig. Since the outside diameter of the guide disc is smaller, it eases the loading of the pig by providing a guide. Each pig is equipped with four scraper/seal discs, which provide an excellent seal during a new construction displacement application. The discs have also proven to provide excellent scraping action for cleaning purposes. All discs are made from TDW's special polyurethane material designed to provide an excellent seal and long wear. The guide/support discs are slightly harder than the scraper/seal discs to enhance the pig's performance. The BiDirectionAll Pig may be run in either direction if the application requires. The seal/ scraper disc will easily reverse its seal position when the flow direction is changed. T. D. Williamson, Inc., is committed to providing you with the exact product to assist you in planning, budgeting and meeting the specifications for your individual application needs. BiDirectionAll Pigs are available in sizes 4" (100 mm) and larger. To help you obtain the proper pig for your application, check to see if the selection is capable of traversing your particular pipeline components (bends, valves, tees, etc.). Gauging plates are available in aluminum, slotted aluminum or steel and can be made to the diameter specified by you. Circular brush cleaning assemblies may be added to the front and/or rear sections of the pig. Magnetic cleaning assemblies may be added to retrieve any ferrous material. The BiDirectionAll Pig can be equipped to mount tracking transmitters. Certain limitations may apply in smaller sizes due to mounting space. In sizes 24" and larger, the Bi- DirectionAll Series II Pig will traverse diameter reductions up to 10% in the form of dents or buckles. The Bi- DirectionAll Series III Pig will traverse diameter reductions up to 20%. In sizes 16" and larger, the BiDirectionAll Pig may be equipped with non-metallic bumpers. In sizes 16" and larger, the Bi- DirectionAll Pig may be equipped with bolt seals, which minimize leaking around the disc-mounting bolts. USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

62 Dimensions and Part Numbers Series I BiDirectionAll Pig p2 Series I Sizes 4" through 14" Series I BiDirectionAll Pigs are designed to be used in pipeline construction during the hydrostatic test phase for air or water displacement applications. Series I BiDirectionAll Pigs traverse 1.5 DR bends when configured as shown. Polyurethane bumpers are standard on 6"-14" pigs. Non-metallic bumpers are optional on the 4" pig. Polyurethane Bumper Guide/Support Disc Spacer Scraper/Seal Disc C A B Inches mm Wt./Lbs. Wt./Kg Part Number A B C (200) 5.7 (145) 1.9 (50) (320) 8.5 (215) 2.8 (70) (400) 11.2 (285) 3.1 (80) (500) 14.0 (355) 3.1 (80) (575) 16.8 (425) 4.0 (100) ( (500) 4.0 (100) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

63 Dimensions and Part Numbers Series II BiDirectionAll Pig p3 Series II Sizes 24" through 60" Replacement discs are less costly for the Series II BiDirectionAll Pigs. The internal diameter of the Series II Pig body is larger and therefore the discs contain less urethane to achieve the same outside diameter as the Series III Pigs. However, Series III Pigs should be used when pipe diameter reductions exceed 10%. Series II BiDirectionAll Pigs traverse 1.5 DR bends when configured as shown. Body Spacer Scraper/Seal Disc Guide/Support Disc B C A Inches mm Wt./Lbs. Wt./Kg Part Number A B C (880) 33.6 (855) 5.1 (130) (950) 36.4 (925) 5.1 (130) (1020) 39.2 (995) 5.1 (130) (1040) 40.0 (1065) 6.4 (160) (1165) 44.8 (1140) 6.4 (160) (1235) 47.6 (1210) 7.0 (180) (1305) 50.4 (1280) 7.0 (180) (1395) 54 (1370) 7.0 (180) (1415) 54.6 (1385) 7.0 (180) (1615) 62.4 (1585) 7.2 (180) (1880) 72.8 (1850) 8.7 (220) (1935) 75.0 (1905) 8.7 (220) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

64 Dimensions and Part Numbers Series III BiDirectionAll Pig p4 Series III Sizes 16" through 60" Series III BiDirectionAll Pigs will traverse diameter reductions up to 20% and 1.5 DR bends when configured as shown. Body Spacer Scraper/Seal Disc Guide/Support Disc B A C Inches mm Wt./Lbs. Wt./Kg Part Number A B C (595) 22.4 (570) 5.1 (130) (665) 25.2 (640) 5.9 (150) (740) 28.0 (710) 6.2 (160) (810) 30.8 (780) 6.2 (160) (880) 33.6 (855) 6.8 (170) (950) 36.4 (925) 7.5 (190) (1020) 39.2 (995) 8.2 (210) (1090) 42.0 (1065) 7.9 (200) (1165) 44.8 (1140) 8.2 (210) (1235) 47.6 (1210) 9.0 (230) (1305) 50.4 (1280) 9.5 (240) (1395) 54.0 (1370) 9.5 (260) (1425) 54.6 (1385) 10 (255) (1625) 62.4 (1585) 11.2 (285) (1885) 72.8 (1850) 15.5 (395) (1945) 75.0 (1905) 16.2 (410) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

65 Ordering Information BiDirectionAll Pig p5 Replacement Parts Size Support/ Guide Disc Scraper/Seal Disc Inches mm Wt./Lbs. Wt./Kg. Part Number Wt./Lbs. Wt./Kg. Part Number Series I Series II Series III Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

66 p6 Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

67 Series IV BiDirectionAll Pig Sizes: 4- through 60-inch Bulletin No: Date: November 2008 Cross Indexing No: n/a Supersedes: n/a Options Description Series IV BiDirectionAll Pigs Specifically designed for pipeline commissioning applications, TDW s Series IV BiDirectionAll Pig is available in all design variations including dewatering, gauging, cleaning, and magnetic configurations needed to pre-commission and commission pipelines. Custom-built using high quality materials, each Series IV BiDirectionAll Pig is tailored to meet very specific dimensional requirements. As with all TDW pigs, each Series IV BiDirectionAll Pig is fitted with Formula SI polyurethane discs, providing excellent wear resistance and optimal performance. Features Each pig is equipped with six discs as its standard configuration, though other configurations are possible. The lead and trailing discs are the guide/support discs, which support the pig. Since the outside diameter of the guide disc is smaller, it eases the loading of the pig by providing a guide. The four scraper/seal discs provide an excellent seal during new construction and displacement applications. The guide/support discs are slightly harder than the scraper/seal discs to enhance the pig s performance. As its name implies, the BiDirectionAll Pig may be run in either direction if the application requires. The seal/scraper discs will easily reverse their seal position when the flow direction changes. In addition, each pig features a steel nameplate, and the steel body of each pig has the capability to be fitted with most tracking transmitters. Each pig also features pluggable bypass ports allowing flow through the pig to be adjusted, optimizing performance. T.D. Williamson, Inc. is committed to providing you with the precise pig to assist you in planning, budgeting and meeting the specifications for your application. Custom configurations and special materials are easily accommodated. BiDirectionAll Pigs are available in sizes 4 inch (100 mm) and larger. Series IV BiDirectionAll Pigs are available in the following standard configurations: Dewatering pigs with four seals and two guide discs. See page 2. Gauging pigs with four seals, two guide discs and an aluminum gauge plate precision machined to suit your requirements. See page 3. Cleaning pigs with four seals and two circular brushes (on sizes up to 20 inches). See page 4. Cleaning pigs of 16 inches and above complete with four seals, two guide discs and a spring-mounted brush assembly. See page 5. Magnetic cleaning pigs with four seals, two guide discs and a magnetic bracelet. See page 6. Other options include multi-diameter pigs, pigs designed to negotiate special fittings, such as check valves and wye fittings, high seal pigs with 6 seal discs and 2 guide discs, and long run pigs with 4 guide discs and 4 seal discs. Contact TDW for more information. USA: UK: +44 (0) T.D. Williamson (U.K) Limited Faraday Road, Dorcan Way Swindon, Wiltshire SN3 5HF England Phone: +44 (0) Fax: +44 (0) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

68 Dimensions and Part Numbers Series IV BiDirectionAll Dewatering Pig p2 These pigs feature four seals and two guide discs, making them suitable for applications such as light to medium batching, line filling and dewatering. All sizes 12-inch and above have a mounting flange suitable for a TDW transmitter. The discs alone provide an excellent scraping action, and these pigs can be used as light utility cleaning pigs. Each disc package can be rearranged to suit your requirements. The bodies are supplied with pluggable bypass holes. Series IV BiDirectionAll Dewatering Pig Size Dimension A Dimension B Approximate Weight (Inches) Part Number Inches mm Inches mm Lbs Kg Available as special order Note: These sealing lengths are based on the above configuration. Up to full bore openings can be traversed by rearranging the disc packages. These pigs can all traverse 1.5D bends. T.D. Williamson (U.K) Limited Faraday Road, Dorcan Way Swindon, Wiltshire SN3 5HF England Phone: +44 (0) Fax: +44 (0) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

69 Dimensions and Part Numbers Series IV BiDirectionAll Gauging Pig p3 Direction of Travel* These pigs feature four seals, two guide discs and an aluminum slotted gauge plate. Each gauge plate is precision machined to a precise diameter, typically 95 percent to 97 percent of the pipe s inside diameter. All sizes 12-inch and above have a mounting flange suitable for a TDW transmitter. Each disc package can be rearranged to suit your requirements. The bodies are supplied with pluggable bypass holes. *For best results, run in direction noted, though direction can be reversed if needed. Series IV BiDirectionAll Gauging Pig Gauge Plate Size Dimension A Dimension B Approximate Weight (Inches) Part Number Inches mm Inches mm Lbs Kg Available as special order Note: These sealing lengths are based on the above configuration. Up to full bore openings can be traversed by rearranging the disc packages. These pigs can all traverse 1.5D bends. T.D. Williamson (U.K) Limited Faraday Road, Dorcan Way Swindon, Wiltshire SN3 5HF England Phone: +44 (0) Fax: +44 (0) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

70 Dimensions and Part Numbers Series IV BiDirectionAll Circular Brush Cleaning Pig p4 These pigs feature four seals and two 360-degree circular brushes (on sizes up to 20-inch), providing full coverage of the pipeline wall. The modular brushes are easily replaced. All sizes 12-inch and above have a mounting flange suitable for a TDW transmitter. Each disc package can be rearranged to suit your requirements. The bodies are supplied with pluggable bypass holes. Series IV BiDirectionAll Circular Brush Cleaning Pig Size Dimension A Dimension B Approximate Weight (Inches) Part Number Inches mm Inches mm Lbs Kg Available as special order Available as special order Available as special order Available as special order Available as special order Available as special order Available as special order Available as special order Available as special order Available as special order Available as special order Note: These sealing lengths are based on the above configuration. Up to full bore openings can be traversed by rearranging the disc packages. These pigs can all traverse 1.5D bends. T.D. Williamson (U.K) Limited Faraday Road, Dorcan Way Swindon, Wiltshire SN3 5HF England Phone: +44 (0) Fax: +44 (0) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

71 Dimensions and Part Numbers Series IV BiDirectionAll Sprung Brush Cleaning Pig p5 These pigs, in sizes of 16-inch and above, feature four seals, two guide discs and a springmounted brush assembly. With each brush individually supported on its own spring, these pigs offer 360-degree brush coverage. The brushes are pinned and clamped onto brush holders. All sizes 16-inch and above have a mounting flange suitable for a TDW transmitter. Each disc package can be rearranged to suit your requirements. The bodies are supplied with pluggable bypass holes. Series IV BiDirectionAll Sprung Brush Cleaning Pig Size Dimension A Dimension B Approximate Weight (Inches) Part Number Inches mm Inches mm Lbs Kg Available as special order Note: These sealing lengths are based on the above configuration. Up to full bore openings can be traversed by rearranging the disc packages. These pigs can all traverse 3D bends. T.D. Williamson (U.K) Limited Faraday Road, Dorcan Way Swindon, Wiltshire SN3 5HF England Phone: +44 (0) Fax: +44 (0) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

72 Dimensions and Part Numbers Series IV BiDirectionAll Magnetic Pig p6 These pigs feature four seals, two guide discs and a magnetic bracelet of very high strength neodymium magnets protected by polyurethane covers. All sizes 12-inch and above have a mounting flange suitable for a TDW transmitter. Each disc package can be rearranged to suit your requirements. The bodies are supplied with pluggable bypass holes. Size Dimension A Dimension B Approximate Weight (Inches) Part Number Inches mm Inches mm Lbs Kg Available as special order Available as special order Available as special order Note: These sealing lengths are based on the above configuration. Up to full bore openings can be traversed by rearranging the disc packages. These pigs can all traverse 1.5D bends. T.D. Williamson (U.K) Limited Faraday Road, Dorcan Way Swindon, Wiltshire SN3 5HF England Phone: +44 (0) Fax: +44 (0) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

73 Inflatable UNISPHERE Pig Sizes: 4-inch and larger Bulletin No: Date: January 2007 Cross Indexing No: n/a Supersedes: (2/05) Inflatable UNISPHERE Pig Options T. D. Williamson, Inc., is committed to providing you with the exact product to assist you in planning, budgeting and meeting the specifications for your individual application needs. TDW offers a UNISPHERE Pig for thin wall pipe in sizes 4" - 14". Different urethane formulations are available for unique applications. Description Features UNISPHERE Pigs are seamless, liquid-cast polyurethane spheres. They are designed for heavy-duty service in the removal of liquid hydrocarbons and water from pipelines and piping systems. UNISPHERE Pigs are undersized and can be sized to match most any pipe ID. The inflating valve(s) on the UNISPHERE Pig may be used for inflating or deflating purposes. UNISPHERE Pigs are to be filled completely with liquid (usually a 50/50 mix of water/glycol and light weight oil). The spheres are easily inflated with a TDW inflation pump. TDW heavy-duty UNISPHERE Pigs can be used in natural gas (wet or dry), crude oil (sweet or sour), and refined hydrocarbon products. Consult the factory for applications in special chemicals. Recommended operating temperature is -20 F to 200 F. Care should be taken when handling or transporting at temperatures below freezing. The polyurethane used to make UNISPHERE Pigs is TDW s own formula. It provides excellent resistance to abrasion, low temperature, and hydrocarbons with minimum swelling and no blisters. It also gives maximum flexibility and tear strength. UNISPHERE Pigs must be filled with liquid prior to placing into service. By removing the inflating valve, liquid may be poured into the sphere. Once the sphere is completely filled, the inflating valve must be reinstalled. If inflation beyond the natural sphere OD is required, an inflation pump is required. UNISPHERE Pigs are inflated easily. USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

74 Dimensions and Part Numbers UNISPHERE Pigs p2 Sphere OD Approx. Wt. Approx. Wt. Min. Allowable Max. Allowable ** Size (Empty) (Empty) (Full of Water) ID Variations ID Variations inches mm Part Number inches mm Lbs. Kg. Lbs. Kg inches mm inches mm 4" *4" TW " *6" TW " *8" TW " *10" TW " *12" TW " *14" TW " " " " " " " " " " " " " " " Accessories and Replacement Parts Pump comes complete with base, stock number pressure hose and instant-on coupling Required Items: Hex long arm wrench, 5/32" Hex long arm wrench, 3/8" Filling adapter Optional: Valve core extractor REPLACEMENT PARTS: Inflating valve Valve core O-ring Pipe plug Consult the factory for sizes not shown and for minimum pipe ID smaller than listed in above chart. Do not inflate beyond pipe ID; over-inflation results in excessive wear. *For use in Thin Wall (TW) Pipe. ** Maximum inflation diameter. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

75 ULTRA Pig-All Urethane Sizes: 16- through 36-inch Bulletin No: Date: January 2007 Cross Indexing No: n/a Supersedes: (12/06) Options DCDC Configuration T. D. Williamson, Inc., is committed to providing you with the exact product to assist you in meeting your individual needs. The ULTRA Pig, offered in a number of configurations, is available with the following options: Additional cups or discs Gauge plates at your specified diameter and configuration Mounting plates for pig tracking transmitters Bypass holes for jet cleaning RealSeal Multi-lip cups for increased sealing effectiveness and wear life Description Features The ULTRA Pig, available in sizes 16 through 36, is an excellent batching/displacement pig and will even perform light cleaning jobs. It can be furnished in a number of cup, disc and cup/disc configurations. Its all-urethane construction, except bolts, nuts and washers, makes this a very lightweight pig. The pig body and spacers are manufactured from our structural grade urethane, designed to withstand the loads applied within a pipeline. This lightens the pig making it easier to handle in the field and also making the pig last longer. The ULTRA Pig is offered in four basic configurations in sizes 16 through 36. The pig bodies will allow the installation of two different size cups and/or discs starting with the 18 and 20 size. Configuration 1111 is used for bidirectional applications. Types 2220 and 2222 are used for long batching and displacement applications. Type 1212 is used when light cleaning, batching and displacement are required on a single run. All cups and discs are replaceable and can be interchanged or reconfigured when conditions warrant or when necessary. They feature TDW's polyurethane formula which is designed to provide superior abrasion resistance. This new polyurethane means more miles and more runs at less cost. Patented in the United States and in foreign countries. USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

76 Dimensions and Part Numbers ULTRA Pig p2 Configuration 1111 Configuration 1212 D D A C B A C B Configuration 1111, Sizes 16" through 36" Dimensions/Inches Dimensions/mm Inches mm Part Number Lbs. Kg. A B C D A B C D Configuration 1212, Sizes 16" through 36" Dimensions/Inches Dimensions/mm Inches mm Part Number Lbs. Kg. A B C D A B C D Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

77 Dimensions and Part Numbers ULTRA Pig p3 Configuration 2220 Configuration 2222 D D A C B A C B Configuration 2220, Sizes 16" through 36" Dimensions/Inches Dimensions/mm Inches mm Part Number Lbs. Kg. A B C D A B C D Configuration 2222, Sizes 16" through 36" Dimensions/Inches Dimensions/mm Inches mm Part Number Lbs. Kg. A B C D A B C D , Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

78 Ordering Information ULTRA Pig p4 Sizes 16 through 36 Body Spacer Flange Nose Disc Cup 16" " " " " " " " " " " Typical of all ULTRA Pigs: Will traverse 1.5 DR bends. Maximum Gate Valve Seat-Ring Spacing is equal to Dimension A - 1" Maximum Check Valve Bowl Length is equal to Dimension B - 1" Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

79 XPig Multi-purpose Utility Tool Sizes: 2- through 12- and 16-inch Bulletin No: Date: October 2008 Cross Indexing No: n/a Supersedes: January 2007 XPig Multi-purpose Utility Tool 5D Configuration Options XPig Multi-purpose Utility Tool 1C5D Configuration Description Available in 4- through 12- and 16-inch sizes, the TDW XPig multi-purpose utility tool is exceptionally versatile, affordable and disposable. It is a one piece pig molded from TDW's Formla SI Urethane with add on options available. XPig Multi-purpose Utility Tool 2C4D Configuration Features Whether your needs are cleaning, batching, displacement, line commissioning/decommissioning, or even gauging, the XPig tool is up to the task. Superior durability allows the XPig tool to finish as strong as it starts. It is available in three basic configurations: One cup and five discs Two cups and four discs Five discs. A smaller front cup/disc facilitates launch and its flexible body is designed to handle 1.5 D radius bends better than rigid-body pigs. The hollow core can house a transmitter or trip magnet to activate non-intrusive pig passage indicators (4- through 16-inch only) T. D. Williamson, Inc., is committed to providing the best products available to assist you in meeting your specific pipeline needs. Available options include: Poly, carbon steel or stainless steel brushes for cleaning Bypass holes for enhanced cleaning capability with jetting action TDW RealSeal option offers excellent sealing performance for de-watering and product segmentation from start to finish. (Applicable to rear cup only.) Discs and cups can be machined to conform to heavy wall ID offshore pipe Select from three available hardness levels (durometer 85* , Shore A) Bolt-on gauging plate option Can be molded with solid core body The TDW Pig Washer facilitates easy cleanup when re-using the XPig tool or any other pigs. *85 is the standard hardness unless otherwise specified Patented in the United States and in foreign countries. USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

80 Dimensions and Part Numbers XPig Multi-purpose Utility Tool p SZ - ABCD - EF SZ A B C D E F Nominal Size Inches Style Durometer Transmitter Retainer Trip Magnet Retainer Bypass Holes RealSeal (Rear Cup Only) 02* 1 = 1C5D 0 = 85A 0 = None 0 = None 0 = None 0 = None 04 2 = 2C4D 1 = 80A 1 = Yes 1 = Yes 1 = 1% 1 = Yes 06 3 = 5D 2 = 75A 3 = 3% (Standard) Example: would be a 12-inch, 1 cup 5 disc, 85A Durometer, Transmiter Retainer (Transmitter sold Separately), with RealSeal Rear Cup *2-inch is available in 1C4D and 4D configurations only. The only options on the 2-inch are changes in the hardness. NOTE: Consult factory for Thickwall (Offshore) Applications 2C4D Configuration 1C5D Configuration 1C5D Configuration Rear Cup removed for 5D Configuration B B A A Dimensions RealSeal Option (Rear Cup Only) Size (Nominal) A B Weight Inches mm Inches mm Inches mm Lbs. Kg Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

81 Dimensions and Part Numbers XPig Multi-purpose Utility Tool - Accessories p3 XPig Multi-purpose Utility Tool 2C4D with Brush Assembly Attached Part Number for Brush Pig 02-33SZ - ABCD - EFGH SZ A B C D E F G H Nominal Transmitter Trip Magnet Bypass RealSeal Brush Number Size (Inches) Style Durometer Retainer Retainer Holes (Rear Cup Only) Material of Brushes 04 1 = 1C5D 0 = 85A 0 = None 0 = None 0 = None 0 = None 0 = Carbon 1 = = 2C4D 1 = 80A 1 = Yes 1 = Yes 1 = 1% 1 = Yes 1 = Stainless Steel 2 = = 5D 2 = 75A 3 = 3% (Standard) 2 = Polyurethane 3 = = Example: would be a 12-inch, 2 cup 4 disc, 80A Durometer, 3% By-Pass, RealSeal Rear Cup, Stainless Steel Brushes One on Front and One on Rear NOTE: Consult factory for Thickwall (Offshore) Applications Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

82 Dimensions and Part Numbers XPig Multi-purpose Utility Tool - Accessories p4 XPig Multi-purpose Utility Tool 2C4D with Guaging Plate Assembly Attached Part Number for Guage Pig 03-34SZ - ABCD - EFGH SZ A B C D E F G H Nominal Transmitter Trip Magnet Bypass RealSeal MFL Gauge DEF Gauge Size (Inches) Style Durometer Retainer Retainer Holes (Rear Cup Only) Plate (Std Size) Plate (Std Size) 02 1 = 1C5D 0 = 85A 0 = None 0 = None 0 = None 0 = None 0 = No 1 = No 04 2 = 2C4D 1 = 80A 1 = Yes 1 = Yes 1 = 1% 1 = Yes 1 = Yes 2 = Yes 06 3 = 5D 2 = 75A 3 = 3% (Standard) Example: would be a 12-inch, 1 cup 5 disc, 85A Durometer, RealSeal Rear Cup, with Standard size Gauge Plate for detecting Pipe Deformation NOTE: Consult factory for Thickwall (Offshore) Applications Standard Gauge Plate Sizes Pig Size Outside Diameter (Nominal) MFL DEF Inches mm Inches mm Inches mm Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

83 Gauging Pigs Sizes: 4- through 36-inch Bulletin No: Date: June 2010 Cross Indexing No: n/a Supersedes: n/a Options Description SO-G Pig 1C3D with Gauge Plate (Typical 4-inch configuration) LV-G Pig DCDC with Gauge Plate (Typical 16-inch and larger configuration) TDW Gauging Pigs are designed to indicate obstructions in a pipeline. The slotted aluminum gauge plates will deform and stay deformed if they encounter an obstruction in the line. Since they are made of aluminum they will not damage the internal surface of the pipe. The pigs will traverse 1.5DR bends unless otherwise noted. They are not recommended for lines containing check valves unless the valves can be locked in the open position. These pigs will be referred to as: SO-G in 4-14 sizes (S small, O OptionAll construction, G gauging). LV-G in 16 and larger sizes (L large, V VANTAGE construction, G gauging). Polly-G for foam pigs with gauge plate. Features SO-G Pig 2C1D with Gauge Plate (Typical 6- through 14-inch configuration) Polly-G Pig with Gauge Plate TDW SO-G and LV-G pigs utilize polyurethane cups and discs. These cups and discs can operate in temperatures ranging from -18 C (0 F) to 93 C (200 F). The Polly-G Gauging Pig is offered in medium and high density bare foam and with a "criss-cross" pattern. The gauge plates are made from aluminum and are slotted in order to deform locally when an unacceptable obstruction is encountered while still allowing the pig to travel on through the pipeline. In the case of severe obstructions the pig may get stuck in the line. Standard gauging plate diameters are from 92% to 94% of standard weight pipe inside diameter. The following options are available on most TDW Gauging Pigs: Alternative material for cups and discs is available in cases where polyurethane is not acceptable. The diameter and thickness of the gauge plate may be specified by the customer. Multiple gauge plates can be provided on one pig. Pig configuration can be modified to meet customer request. Pigs can be modified if necessary to hold a transmitter for tracking the pig during its run through the line, or to locate the pig should it get stuck in the line. TDW offers alternative methods to effectively locate and size obstructions using smart pigs. For more information contact your local TDW representative. USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

84 Dimensions and Part Numbers SO-G Gauging Pigs Sizes 4- through 14-inch p2 SO-G Pig with Gauge Plate 4-inch L A Standard Gauge Nom Pipe Size Plate Diameter* Approx Pig Wt A L Inches mm Inches mm lbs kg Inches mm Inches mm Pig Part Number* CC-DD03 *The "CC-DD" in the part number is used to specify the diameter of the gauge plate with the "CC" being inches and the "DD" being hundreths of an inch. For example: a 4-inch pig with a part number of would have a 3.70-inch diameter gauge plate. The 03 at the end of the part number denotes a standard 3/16-inch gauge plate thickness. SO-G Pig with Gauge Plate 6- through 14-inch L A Standard Gauge Nom Pipe Size Plate Diameter* Approx Pig Wt A L Inches mm Inches mm lbs kg Inches mm Inches mm Pig Part Number* CC-DD CC-DD CC-DD CC-DD CC-DD03 *The "CC-DD" in the part number is used to specify the diameter of the gauge plate with the "CC" being inches and the "DD" being hundreths of an inch. For example: a 10-inch pig with a part number of would have a 9.75-inch diameter gauge plate. The 03 at the end of the part number denotes a standard 3/16-inch gauge plate thickness. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

85 Dimensions and Part Numbers LV-G Gauging Pigs Sizes 16-inch and Larger p3 LV-G Pig with Gauge Plate 16-inch and Larger L A Standard Gauge Nom Pipe Size Plate Diameter* Approx Pig Wt A L Inches mm Inches mm lbs kg Inches mm Inches mm Pig Part Number* CC-DD CC-DD CC-DD CC-DD CC-DD CC-DD CC-DD CC-DD CC-DD CC-DD CC-DD03 *The "CC-DD" in the part number is used to specify the diameter of the gauge plate with the "CC" being inches and the "DD" being hundreths of an inch. For example: a 16-inch pig with a part number of would have a inch diameter gauge plate. The 03 at the end of the part number denotes a standard 3/16-inch gauge plate thickness. Polly-G Pig with Gauge Plate Consult factory for available Foam Pigs with Gauge Plate options Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

86 p4 Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

87 V-Jet Corrosion Inhibitor Pigs Sizes: 4- through 28-inch Bulletin No: Date: March 2008 Cross Indexing No: n/a Supersedes: n/a) Featuring sealing cups molded of tough Formula SI urethane, the V-Jet Pig is designed to be sturdy and reliable during long runs. The V-Jet Pig works well for the final stages of a cleaning program as a means of removing scale from the pipe s top inner wall. Options V-Jet Corrosion Inhibitor Pig 10- through 28-inch Description Injection or batching of corrosion inhibitor fluid can help reduce pipeline deterioration, but gravity naturally forces inhibitor to settle along the bottom of a pipe, leaving the top of the pipe unsaturated and most vulnerable to corrosion. The TDW V-Jet Corrosion Inhibitor Pig is designed to defy gravity by spraying corrosion inhibitor onto the inside top portion of multi-phase gas gathering or gas transmission pipelines. The V-Jet Pig works based on the dynamics of bypass flow and differential pressure, with no moving parts or pressure vessels to fill and charge. Instead, the V-Jet Pig s patented design allows the higher pressure to flow through its body and spray head. Bypass flow acts as the accelerant to transfer and vaporize fluid while creating a low pressure area in the spray nozzle as it passes through. This pressure drop creates a vacuum at the V-Jet Pig s front inlet ports, and this vacuum draws up residual corrosion inhibitor that has settled on the bottom of the pipe. V-Jet VXP Corrosion Inhibitor Pig 4- through 8-inch The reclaimed corrosion inhibitor is then redeployed by the nozzles as an atomized spray at about a 45-degree angle (10-inch and larger) onto the top half of the pipe s inner wall. The atomized spray also creates an increasingly dense vapor cloud that is pushed ahead of the V-Jet Pig during the entirety of the run, helping to coat all areas of the pipe wall with inhibitor. Features A counterweight in the V-Jet Pig helps it maintain proper nozzle orientation during each run (10-inch and larger). For liquids with physical properties similar to water, each nozzle typically delivers approximately three quarts per minute at 15 psi. Inhibitor delivery rates will vary depending on differential pressure, fluid viscosity and specific gravity. The V-Jet Pig is available in multiple sizes and nozzle configurations. For sizes 4- through 8-inch, the V-Jet VXP Pigs have a single central nozzle. Larger diameter V-Jet Pigs are available in a variety of nozzle arrangements, from 10-inch pigs with two nozzles all the way up to 28-inch pigs with nine nozzles. Custom designs are also possible for larger pigs. The V-Jet Pig can be used as a stand-alone dewatering pig, or in tandem with a slug of corrosion inhibitor behind. It can also be used in batching mode with a slug of inhibitor separating a batching pig up front and the V-Jet Pig behind. This inhibitor slug serves as a reservoir to supply the V-Jet Pig s spray nozzles and facilitates creation of a dense inhibitor fog between the pigs as they move through the pipe. The V-Jet Pig has also been successful in chemical cleaning applications. V-Jet Corrosion Inhibitor Pig Patented in the United States and in foreign countries. V-Jet VXP Corrosion Inhibitor Pig Patent Pending in the United States and in foreign countries. USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

88 Dimensions and Part Numbers V-Jet Corrosion Inhibitor Pig p2 A B C D V-Jet Corrosion Inhibitor Pig - Sizes 10- through 28-inch Size Part A B C D Approximate (Inches) Number Inches Inches Inches Inches Weight (Lbs.) S S V-Jet VXP Corrosion Inhibitor Pig Part Number System: XX Durometer Size Type / Configuration (2 Cup x 4 Disc) V-Jet VXP Corrosion Inhibitor Pig - Sizes 4- through 8-inch Size Part A B D Approximate (Inches) Number Inches Inches Inches Weight (Lbs.) XX XX XX Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

89 Urethane Cups Sizes: 2-inch and Larger Bulletin No: Date: October 2008 Cross Indexing No: n/a Supersedes: (1/08) TDW Urethane Cups and Discs Close-up RealSeal Description TDW offers a complete line of urethane replacement cups for all TDW pigs. The TDW cups are direct replacements of the original cups and may be installed on most pigs supplied by others. TDW cups are manufactured in strict accordance to our quality standards and laboratory tested to assure they meet the established physical and chemical properties. Features Our cups feature TDW s polyurethane formula which is designed to provide superior abrasion and wear-resistance qualities. Most TDW cups are equipped with bolt hole metal inserts to allow for proper torque tightening of mounting bolts. TDW cups are exact duplicates of the original cups to assure sure fit of replacement cups and proper installation. TDW offers conical cups for use on VANTAGE type pigs and heavy-duty type scraper cups for use on standard scraper type pigs. The conical cups and HD type cups may be supplied in the RealSeal configuration. Options TDW is committed to providing you with the exact product to assist you in meeting the needs of your individual applications. Cups may be furnished at special diameters to give the best performance in your pipeline. Cups may be furnished at different hardnesses or different formulations to meet your specific application. Cups may be furnished with bypass holes to increase the cleaning effectiveness. Cups may be furnished in conical or standard configuration. Cups may be furnished from rubber compounds for unique chemical applications. VANTAGE Batching VANTAGE Cleaning RealSeal Cups are patented in the United States and in foreign countries. USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

90 Dimensions and Part Numbers TDW Urethane Cups p2 Type A 2 through 14 (50 mm mm) Size Minimum ID Maximum ID Weight Inches mm Part Number Inches mm Inches mm Lbs. Kg * * * * * * * * * For thin wall applications Type A Scraper Cup Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

91 Dimensions and Part Numbers TDW Urethane Cups p3 Type HD 6 and Larger Size Standard RealSeal Minimum ID Maximum ID Weight Inches mm Part Number Part Number Inches mm Inches mm Lbs. Kg Type HD Scraper Cup Type HD RealSeal Scraper Cup Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

92 Dimensions and Part Numbers TDW Urethane Cups p4 VANTAGE IV, VANTAGE V, and OptionAll Pig Cups 4 and Larger Size Standard RealSeal Minimum ID Maximum ID Weight Inches mm Part Number Part Number Inches mm Inches mm Lbs. Kg VANTAGE IV, VANTAGE V, and OptionAll Pig Cups VANTAGE IV, VANTAGE V, and OptionAll RealSeal Pig Cups Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

93 Scraper Discs Sizes: 4-inch and Larger Bulletin No: Date: January 2007 Cross Indexing No: n/a Supersedes: (2/05) Options Description TDW offers a complete line of urethane and rubber replacement discs for TDW pigs. The TDW discs are direct replacements of the original disc and may be installed on most pigs supplied by others. TDW discs are manufactured in strict accordance to our quality standards and laboratory tested to assure they meet the established physical and chemical properties. Urethane Scraper Disc Features Our urethane disc features TDW s polyurethane formula which is designed to provide superior abrasion and wear resistance qualities. Most TDW discs are supplied with metal bolt hole inserts to allow for proper torque tightening of mounting bolts. TDW discs are exact duplicates of the original disc to assure fit-up and proper installation. TDW offers discs in varying hardnesses, thicknesses, center holes, and bolt circles to meet your specific requirements. TDW discs may be equipped with bypass holes to promote cleaning effectiveness. T. D. Williamson, Inc., is committed to providing you with the exact product to assist you in meeting the needs of your individual applications. Discs are furnished to varying hardnesses, diameters, thicknesses, center hole diameters, and bolt circle diameters to meet your application requirements. Scraper discs may be furnished with bypass holes to increase the cleaning effectiveness. Discs may be used in conjunction with cups or used by themselves in either unidirectional or bidirectional applications. Discs may be furnished from urethane or rubber compounds. Dual diameter slotted discs are provided for dual diameter applications. Patented in the United States and in foreign countries. USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

94 Dimensions and Part Numbers Dual-Diameter Scraper Discs p2 When ordering discs in sizes 4 through 14 (100 mm through 350 mm), please specify center hole diameter, type of pig, or part number of pig. Solid Urethane Discs for Dual-Diameter Pigs Size For Pig Size Weight Inches mm Inches mm Part Number Lbs. Kg x x x x x x x x x x x x Solid Neoprene Discs for Dual-Diameter Pigs Size For Pig Size Weight Inches mm Inches mm Part Number Lbs. Kg x x / x x / x x / x x / x x / x x Slotted Urethane Discs for Dual-Diameter Pigs Size For Pig Size Weight Inches mm Inches mm Part Number Lbs. Kg x x x x x x x x x x x x Slotted Neoprene Discs for Dual-Diameter Pigs Size For Pig Size Weight Inches mm Inches mm Part Number Lbs. Kg x x / x x / x 12* 200 x / x 12^ 250 x / x x /2 2.0 *Has 3/4 (19 mm) center hole. ^Has 1-1/4 (31 mm) center hole. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

95 Dimensions and Part Numbers Bidirectional Scraper Discs p3 BiDirectional Disc Size Weight Support/ Guide Disc Weight Scraper/Seal Disc Inches mm Lbs. Kg. Part Number Lbs. Kg. Part Number Series I Series II Series III Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

96 Dimensions and Part Numbers Other Bidirectional Scraper Discs p4 Molded Neoprene Discs for Bidirectional Pigs Size OD Thickness Weight Inches mm Inches mm Inches mm Part Number Lbs. Kg / / / / / / / / / / / / / / / / / / / / / / / / / / / / Bidirectional Urethane Discs for the ULTRA Pig Size OD Thickness Weight Inches mm Inches mm Inches mm Part Number Lbs. Kg Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

97 Steel Wire Brushes Sizes: 2-inch and Larger Bulletin No: Date: October 2008 Cross Indexing No: n/a Supersedes: (1/07) Steel Wire Brushes Description Features Options TDW offers a wide variety of replacement cleaning brushes for the various types of TDW cleaning pigs. Wheel brush for FJR, JRN, and Vantage pigs T-Brush for T-Pigs and Vantage pigs Wrap brush for OptionAll pigs Square brush for WCK pigs Parallelogram brush for Vantage V Pigs Circular PitBoss Brush for PitBoss Pigs All TDW Cleaning Brushes are made from the highest quality materials and manufactured to standards to assure the maximum cleaning effectiveness for internal pipe cleaning. All replacement brushes are exact duplicates of the brushes originally supplied and are completely interchangeable for field installation. T.D. Williamson, Inc., is committed to providing you with the exact product to assist you in meeting your individual needs. TDW can provide: Non-metallic brushes Brush wrap assemblies for converting our BiDirectionAll cleaning pigs Complete brush conversion kits for converting the Vantage V Batching Pigs to cleaning pigs USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

98 Dimensions and Part Numbers Steel Wire Brushes p2 Steel Wire Brushes for WCK-3 and WCK-12 Pigs Size Flat Wire Weight Fine Wire Weight Inches mm Part Number Lbs Kg. Part Number Lbs Kg /2.23 * / / / / / / *Standard on 6 (150 mm) only. Steel Wire Brushes for WCK-3DD and WCK-12DD Pigs Size Flat Wire Weight Fine Wire Weight Inches mm Part Number Lbs Kg. Part Number Lbs Kg. 6 x 6-1/2 150x /2.23 * / x 8 150x / / x 8-1/2 200x / x x / /2 x 10-1/4 241x / / x x / / x x / / x x / / x x / / x x *Standard on 6 x 6-1/2 (150 mm x 165mm). Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

99 Dimensions and Part Numbers Steel Wire Brushes p3 Steel Wire Brushes for T-1 Pigs Size Weight Inches mm Part Number Lbs Kg / / / and up 450 and up Wire Brushes for VANTAGE Pigs Size Weight Inches mm Part Number Lbs Kg / and up / Wire Brushes for X-Pig Multi-Purpose Utility Tools Size Weight Inches mm Part Number Lbs Kg Wheel Type Brushes for FJR, JRN and VANTAGE + Pigs Size Weight Inches mm Part Number Lbs Kg / / / / / / / /3.14 NOTE: Stock numbers for wheel type brushes listed above are for standard weight pipe. Brushes for other than standard weight pipe are available. Purchase orders should specify pipe ID. Wire Brushes for OptionAll Pigs Weight Weight O.D. Weight Assy Assy Assy Replacement Brush Brush Size Inches mm Inches mm Part Number Lbs Kg. Part Number Lbs Kg * n/a N/A N/A *Two (2) Brushes required per location. W = per brush. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

100 p4 Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

101 Urethane Blades Sizes: 6- through 48-inch Bulletin No: Date: January 2007 Cross Indexing No: n/a Supersedes: (3/06) Options 3-Rib Urethane Blades T. D. Williamson, Inc., is committed to providing you with the exact product to assist you in planning, budgeting and meeting the specifications for your individual application needs. The following options are available. Different urethane formulations are available for unique applications. Plow Urethane Blade Description TDW urethane blades provide the tough scraping action necessary to remove soft internal deposits. The various types of blades available replace blades on Vantage +, Vantage IV and Vantage V, WCK and T-1 Pigs. Features TDW Urethane Blades are formulated from our polyurethane formula, which is designed to provide superior abrasion resistance and maximum scraping action. All urethane blades are exact duplicates of the original blades purchased and are completely interchangeable for field installation. USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

102 Dimensions and Part Numbers Urethane Blades p2 Urethane Plow Blades for WCK Pigs Size Weight Blades Guides Bolts Nuts Washers inches mm Lbs. Kg. Part Number Part Number Part Number Part Number Part Number Rib Urethane Blades for T-1 Pigs Size Weight Blades Guides Bolts Nuts Washers inches mm Lbs. Kg. Part Number Part Number Part Number Part Number Part Number Rib Urethane Blades for VANTAGE Pigs Size Weight Blades Bolts Nuts Washers inches mm Lbs. Kg. Part Number Part Number Part Number Part Number Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

103 TDW Pigging Products TDW Closures Application Data Form To help us better serve you in providing the right TDW products for your piping system requirements, please complete this form and return to TDW by mailing or by fax (see below). Form No: cl 10/02 Date: October 2002 Supersedes: cl 5/01 Company: Date: Address: City: State: Country: Contact: Phone: Fax: Required Information Size: ANSI Class: Design Pressure: Design Temp: Closure Type: Clamp-Ring (sizes 4 and larger) Threaded (4 through 14 ) Corrosion Allowance: Manufacturer s Hydrotest: No (std) or Yes if yes, Pressure: Hinge Location: RH or LH Operation: Vert. or Horz. Weld Attachment Specifications Outside Diameter: Wall Thickness: Material: Design Code: ASME B31.4 w/ 0.72 Design Factor ASME B31.8 w/ 0.60 Design Factor ASME B31.8 w/ 0.50 Design Factor ASME B31.3 ASME Section VIII, Division 1 Other (ie., BS5500) Special Requirements: Note: TDW Standard Closures are designed to meet ASME B31.4 and B31.8 codes. Other design codes, such as ASME B31.3 and ASME Section VIII, Division I Closures are available upon request as designated on this form. The TDW Standard Design is based upon a.60 design factor; i.e., a 600# standard closure with a.60 DF would have an MAOP of 1480 psi and an MTP of 2220 psi. All TDW closures, are externally painted and shipped, ready for weld installation. The standard O-ring material is Buna-N; please specify if other O-ring material is required. TDW Pigging Products East 55th Place Tulsa, Oklahoma USA Fax: Toll Free: Phone: T.D. Williamson (U.K.) Ltd. Faraday Road, Dorcan Way, Swindon, Wiltshire ENGLAND SN3 5HF Fax: (44) 1-793/ Ph: (44) 1-793/603600

104

105 TDW Pigging Products Pig Launchers & Receivers Application Data Form serve you in providing the right TDW products for your piping system requirements, please complete this form and return to TDW by mailing or by fax (see below). To help us better Form No: l&r 3/99 Date: March 1999 Supersedes: n/a Company: Date: Address: City: State: Country: Contact: Phone: Fax: Required Information Pipeline Size: ANSI Class: Design: Pressure: Test Pressure: Design Temperature: Corrosion Allowance: Type of Pigs to be Used (if known, indicate maximum length of longest pig): Product Media (gas, oil, etc.) Surface Finish: Design Code: ASME B31.4 w/ 0.72 Design Factor ASME B31.8 w/ 0.60 Design Factor ASME B31.8 w/ 0.50 Design Factor ASME B31.3 ASME Section VIII, Division 1 Other (ie. BS5500) This project will require a: Pig Launcher Pig receiver Complete Pig Launching System Complete Pig Receiving System Note: A pig launcher or pig receiver only includes the oversize barrel, closure, reducer, and nozzles. A complete pig launching system or pig receiving system includes the pig launcher or pig receiver with associated bypass piping, valves, pig indicators, and skid frame mounted. Special Requirements: TDW Pigging Products East 55th Place Tulsa, Oklahoma USA Fax: Toll Free: Phone: T.D. Williamson (U.K.) Ltd. Faraday Road, Dorcan Way, Swindon, Wiltshire ENGLAND SN3 5HF Fax: (44) 1-793/ Ph: (44) 1-793/603600

106

107 PIG-SIG IV Scraper Passage Indicator Bulletin No: Date: June 2008 Cross Indexing No: n/a Supersedes: (1/06) Flag Indicator Electrical Indicator Options Description TDW s PIG-SIG IV Scraper Passage Indicator is a device installed on a pipeline to detect the passage of a pig or sphere. The most common indicators have a trigger extending into the pipeline through a welded fitting that has been tapped. When a pig passes, the trigger is tripped, activating the signaling mechanism. Signaling systems available include a flag indicator, electrical indicator or flag/electrical indicator. All indicators are compatible with all standard plug assemblies now in the field and are interchangeable. This makes it possible to use these units as conversion kits as well as complete PIG-SIG Indicators. Flag Electrical Indicator Features The PIG-SIG IV is weatherproof and corrosionresistant. It features housings manufactured from space age plastic for durability and weather resistance. The flag indicator offers high visibility from the air or the ground. The electrical indicator switch has UL, CSA and European approvals. The carbon steel nipple is manufactured from easily weldable material. The PIG-SIG Indicator can be installed on or removed from a pressured pipeline using a TDW T-101 Tapping Machine and accessories. T. D. Williamson, Inc. is committed to providing you with the exact product to assist you in planning, budgeting and meeting the specifications for your individual application needs. The PIG-SIG IV Scraper Passage Indicator is available in a number of different materials, depending on product carried in the pipeline. The following options are available: Flag Indicator with Manual Reset; Rotary Cap Indicator with Manual Reset; Electrical Indicator with Auto Reset; Flag/Electrical Indicator combined. Extended models are available in all configurations. Unidirectional or bidirectional models are available. Special materials and O-Ring seals are available. Models are available for environmentally harsh conditions. Nipple can be furnished with flanged or threaded mounting. Stainless steel or brass trigger assemblies are available. Build your own PIG-SIG IV Assembly from the following charts. USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T. D. Williamson, Inc. / Printed in USA

108 Order Information PIG-SIG IV Scraper Passage Indicators p Indicator Assembly Indicator Option Part Number 0 = Flag with Manual Reset = Electrical with Auto Reset = Flag/Electrical combined Flag Shaft Assembly Shaft Option Part Number 0 = Nonextended = 12 Extension = 24 Extension = 36 Extension = 48 Extension = 60 Extension = 72 Extension = 84 Extension = 96 Extension = 108 Extension Plug Assembly Plug Assembly Option Part Number 0 = Unidirectional, Brass X 5 = Bidirectional, Brass X 2 = Unidirectional, 316 SST X 7 = Bidirectional, 316 SST X Note: The last digit of the plug assembly corresponds to O-ring material option. Unidirectional Extended Shaft Electrical Extension Standard Length Bidirectional Flag/Electrical Standard Length Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T. D. Williamson, Inc. / Printed in USA

109 Order Information PIG-SIG IV Scraper Passage Indicators p3 XXXX - Suffix * Final Assembly With Flag Indicator O-Ring Material Material Option Part Number 0=Buna =Buna-N (Low Temp) =Neoprene =Viton =EPDM =Kalrez =Viton GF A=Viton AED A SUFFIX Pipe Size Pipe Pipe Wall Size Thickness Length Suffix 6 & Up.250 to & Up.501 to & Up.751 to & Up to & Up to & Up to & Up.125 to to to to to to Less Nipple -99 * Please indicate if protection for environmentally harsh conditions is required. 5 & Smaller Pipe 6 & Larger Pipe Final Assembly With Flag/ Electrical Indicator Length Length THREAD-O-RING Nipple part number: SUFFIX Final Assembly With Electrical Indicator Example: is a PIG-SIG with a flag indicator, 12 extended shaft, unidirectional 316 SST Plug, and Viton O-rings for 6 and larger pipe with.250 to.500 wall. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T. D. Williamson, Inc. / Printed in USA

110 Specifications PIG-SIG IV Scraper Passage Indicators p4 THREAD-O-RING Nipple Material Size & Grade: Tensile Requirements: 2 NPS XXS ASTM A 333 Grade 6 seamless steel pipe 35,000 psi SMYS - 60,000 psi SMTS Impact Requirements: 13 ft-lbf min Avg 3 Specimens 10 ft-lbf min One Specimen Only Impact Temperature -50 F Chemical Requirements: Composition, % - Carbon 0.30 max, Manganese , Phosphorus max, Sulfur max, Silicon 0.10 min Test Report: Certified Test Reports furnished per ASTM A 530 Pressure Temperature Ratings Pressures are in pounds per square inch, gage (psig). Temperatures are in Fahrenheit. Piping Code B31.3 B31.4 B31.8 Temp. F F=.72 F=.72 F=.60 F=.50 F= to Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T. D. Williamson, Inc. / Printed in USA

111 Specifications PIG-SIG IV Scraper Passage Indicators p5 Pressure Temperature Ratings Pressures are in bar. Temperatures are in Celsius. Piping Code B31.3 B31.4 B31.8 Temp. C F=.72 F=.72 F=.60 F=.50 F= to Pressures do not include allowance for corrosion. O-Ring material selection must be suitable for service fluids and temperature requirements. Recommended Spare Parts List Component Quantity/Assembly Quantity/Spares* Part Number Trigger, Bidirectional Trigger, Unidirectional Trigger Pin Gear, Uni-Directional Gear, Bi-Directional Pin Drive Sleeve Back-up Ring Reset Spring Needle Thrust Bearing Seal Kit 1 4 See O-Ring option * for start-up & 2 years service Under severe start-up and/or severe operating conditions additional maintenance is required. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T. D. Williamson, Inc. / Printed in USA

112 Dimensions and Part Numbers PIG-SIG IV Scraper Passage Indicators p6 The basic indicator includes 2" (50 mm) THREAD-O-RING nipple, trigger (shaft and plug assembly with O-ring), pipe cap and flag indicator. The extended indicator includes the same items as the flag indicator model plus an extension shaft and extension housing assembly. Length Weight Part Number In. mm Lbs. Kg. Unidirectional Bidirectional Basic Extended: Consult the factory for larger sizes. Flag Indicator with Manual Reset The basic indicator includes: 2 (50 mm) THREAD-O-RING nipple, trigger (shaft and plug assembly with O-ring), pipe cap and electrical indicator. The electrical indicator consists of an explosion-proof microswitch (BX, double pole, double throw), cam spring, bracket, and cover. The extended indicator includes the same items as the electrical indicator model plus an extension shaft and extension housing assembly. Electrical Indicator with Auto Reset Length Weight Part Number In. mm Lbs. Kg. Unidirectional Bidirectional Basic Extended: Consult the factory for larger sizes. The basic indicator includes: 2 (50 mm) THREAD-O-RING nipple, trigger (shaft and plug assembly with O-ring) pipe cap and flag/electrical indicator, combined. The electrical indicator consists of an explosion-proof microswitch (BX, double pole, double throw), cam, spring, bracket, and cover. The extended indicator includes the same items as the flag/ electrical indicator model, plus an extension shaft and extension housing assembly. Flag Indicator with Manual Reset - Electrical Indicator with Auto Reset Combined Length Weight Part Number In. mm Lbs. Kg. Unidirectional Bidirectional Basic Extended: Consult the factory for larger sizes. Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T. D. Williamson, Inc. / Printed in USA

113 Specifications PIG-SIG IV Scraper Passage Indicators p7 Electrical specifications: Double-Pole 2 N.O., 2 N.C. 3/4 in. conduit MOMENTARY MICRO SWITCH Electrical Diagram Electrical Indicator Switch Specifications MICRO SWITCH 1 weather-sealed explosion-proof switch BXP4L is designed specifically for use in hazardous location applications. The switch enclosure is sealed for protection against corrosion, water, dust and oil as defined in NEMA 1,3, 4, 4X, 6, 7, 9 and 13 and IP67 as defined in IEC 529. The switch enclosure meets the European Hazardous Locations Designation: EExd IIC T6 category II 2 GD, SIRA 00ATEX 1037X. The switch complies with the European Directive on Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres (94/9/EC) commonly referred to as the ATEX Directive. Compliance with the Essential Health and Safety Requirements has been assured by compliance with EN and EN The switch meets the North American Hazardous Locations Designation: Class I, Groups B, C and D; Class II, Groups E, F, and G. The switch complies with UL (File No. E61730) and CSA (File No. LR57327). The switch operating temperature range is -40ºF (-40ºC) to 158ºF (70ºC). The switch housing is epoxy coated Aluminum and Zinc with Fluorosilicone seals. Electrical Ratings 10 amps continous carry. Circuits on any one pole must be the same polarity. AC Volts - Pilot Duty: 600 VAC, 720VA Amps at 0.35 Power Factor Circuitry VAC Make Break Double-Pole Double-Throw DC Volts - Pilot Duty: 240 VDC, 30 watts Make and Break Amps Circuitry VDC Inductive Resistive Double-Pole Double-Throw MICRO SWITCH is a Honeywell Division Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T. D. Williamson, Inc. / Printed in USA

114 p8 Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T. D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T. D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T. D. Williamson, Inc. / Printed in USA

115 PIG-SIG V Scraper Passage Indicator Optional mounting system available Bulletin No: Version: Supersedes: ( ) ECN: E Options Available options: Flag Indicator with Manual Reset Electrical Indicator with Auto Reset Flag/Electrical Indicator combined Extended models, for installation on buried pipelines, are available in all configurations Special materials and O-ring seals Isolation Ball Valve (upon request) Unit can be thread-mounted to THREAD-O-RING nipple or flange-mounted Build your own PIG-SIG V assembly from the charts on the pages of this product bulletin Description Features TDW s PIG-SIG V Scraper Passage Indicator is a device installed at prescribed intervals on pipelines to detect the passage of a scraper or sphere. This unique product functions by extending an omnidirectional trigger into the pipeline through a welded fitting: the trigger is tripped by the passage of a scraper/sphere. The TDW PIG-SIG V Scraper Passage Indicator is easy to install, compatible with all standard THREAD-O-RING nipples, as well as flanged fittings, and all but eliminates trigger breakage. Signaling systems available with the PIG-SIG V device include a flag indicator, an electrical indicator or a flag/electrical indicator. It is compatible with all standard THREAD-O-RING nipples previously sold by TDW and are interchangeable. This makes it possible to order the PIG-SIG V unit as an upgrade conversion kit without nipple, or as a new installation kit complete with nipple. The PIG-SIG V device can also be provided in a flange-mounted configuration per the required pipeline pressure class (up to 2500 lb.). Standard PIG-SIG V Passage Indicators are built to withstand the most severe offshore/ onshore environments. Each PIG-SIG V device is weatherproof and corrosion-resistant. All components exposed to pipeline products are completely sealed to prevent leakage and are NACE compatible. Components exposed to the atmosphere are all 316 stainless steel except on electrical models, where the MICRO SWITCH is aluminum with a protective powder coating (unless stainless steel is specially requested). The MICRO SWITCH flag indicator offers high visibility. Because the triggering toggle that extends into a pipe is omnidirectional, it does not require adjustments after it is set. This means the flag can be oriented to face any desired direction. The carbon steel nipple is manufactured from easily weldable material. All PIG-SIG indicators can be installed on or removed from a pressurized pipeline by using a TDW T-101 Tapping Machine and accessories. Electrical Indicator T.D. Williamson is committed to providing you with the right product to assist you in planning, budgeting and meeting the specifications for your individual application needs. The PIG-SIG V is patented in the U.S. ( ) and other countries. Viton, Teflon, Buna-N and Kalrez are trademarks of E.I DuPont de Nemours Company. MICRO SWITCH TM is a trademark of Honeywell International, Inc. AFLAS is a trademark of Asahi Glass Co., Ltd. Flag/ Electrical Indicator North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2015 All rights reserved. T.D. Williamson, Inc.

116 Order Information PIG-SIG V Scraper Passage Indicator p2 04-XXXX - XXXX- Class Options Shaft Assembly Plug Assembly Class* Pipe Sizes Mounting Extension Length THREAD-O-RING Nipple-Mounted inch ( mm) TOR Nipple-Mounted inch (125 mm) and Larger TOR Nipple-Mounted # RF Flange-Mounted # RF Flange-Mounted # RF Flange-Mounted # RTJ Flange-Mounted / 1500 # RF Flange-Mounted / 1500 # RTJ Flange-Mounted # RF Flange-Mounted 0 None None mm 2* mm 3* mm 4* mm mm mm 7* mm mm 0 = 316 Stainless Steel Omnidirectional 1*= Naval Brass * Special options available upon request. Factory lead times may vary. OPTIONAL * All Ratings are ANSI Class TOR = THREAD-O-RING TM Indicator Assembly 9* mm A* mm * Special options available upon request. Factory lead times may vary. 8 9 Indicator Option 0 Flag with Manual Reset 1 Electrical with Auto Reset 2 Flag/Electrical Combined 3* Electrical with Auto Reset (Stainless Steel Switch Housing) 4* Flag/Electrical Combined (Stainless Steel Switch Housing) * Special options available upon request. Factory lead times may vary. Extended Indicator Flange -Mounted THREAD-O-RING TM Material 0 A105 & A350 LF2 CL1 Dual Certification 1 A105 & A350 LF2 CL1 Dual Certification 2 A182 F316 w/ EN Certification 3 A 182 F316 w/ EN Certification 4 A 694 F52 w/ EN Certification Flag Indicator Assembly Electrical Indicator Assembly Flag/Electrical Indicator Assembly Example: This example is a PIG-SIG V indicator with a THREAD-O-RING nipple and a nipple-mounted flag indicator, 12 in. extended shaft for 6 in. and larger pipe with.250 in. to.500 in. wall. North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2015 All rights reserved. T.D. Williamson, Inc.

117 Order Information p3 Suffix* OPTION O-Ring Material Explosive Decompression & Extrusion Resistant Viton Buna-N (Low Temp.) Neoprene EPDM Kalrez Buna Viton GF Teflon Explosive Decompression Resistant AFLAS Viton (Low Temp.) Special options available upon request. Factory lead times may vary. Option w/ EN w/ EN THREAD-O-RING Nipple-Mounted Options Nom. Pipe Size Wall Thickness Nipple Length in. mm in. mm in. mm Suffix & up 150 & up & up 150 & up & up 150 & up & up 150 & up & up 150 & up & up 150 & up & up 150 & up Less Nipple 99 * Please indicate if protection for environmentally harsh conditions is required. Flange-Mounted Assembly Options Suffix Contact your TDW representative with pipe size, wall thickness, desired extension length and flange type to determine the appropriate 4-digit suffix. 5 in. & Smaller Pipe 6 in. & Larger Pipe THREAD-O-RING Nipple part number: SUFFIX Length Length North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2015 All rights reserved. T.D. Williamson, Inc.

118 Specifications p4 PIG-SIG V Scraper Passage Indicator THREAD-O-RING Nipple Material Size & Grade: Tensile Requirements: Impact Requirements: 2 NPS XXS ASTM A 333 Grade 6 seamless steel pipe 35,000 psi SMYS - 60,000 psi SMTS 13 ft-lbf min. avg. three specimens 10 ft-lbf min. one specimen only Impact Temperature -50 F Chemical Requirements: Composition, % - Carbon 0.30 max, Manganese Phosphorus max., Sulfur max., Silicon 0.10 min. Test Report: Certified Test Reports furnished per ASTM A 530 THREAD-O-RING Flange Material Grade: A105 / A694 F52 / A350 LF2 triple certified Tensile Requirements: Yield 360 N/mm2, Tensile 485 N/mm2 Impact Requirements: -46 C, 27 J avg. three specimen, 20 J minimum one specimen Chemical Requirements: C 0.26% max., Mn 1.35 % max., P 0.025% max., S 0.025% max., Si 1% max. Test Report: EN THREAD-O-RING Pressure Temperature Ratings Pressures are in pounds per square inch, gage (psig). Temperatures are in Fahrenheit. Piping Code B31.3 B31.4 B31.8 Temp. F F =.72 F =.72 F =.60 F =.50 F = to THREAD-O-RING Pressure Temperature Ratings Pressures are in bar. Temperatures are in Celsius. Piping Code B31.3 B31.4 B31.8 Temp. C F =.72 F =.72 F =.60 F =.50 F = to Pressures do not include allowance for corrosion. O-Ring material selection must be suitable for service fluids and temperature requirements. Due to magnet degradation, the temperature for the plug assembly is limited to 200º F (93º C) North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2015 All rights reserved. T.D. Williamson, Inc.

119 Specifications PIG-SIG V Scraper Passage Indicator p5 Flag Indicator with Manual Reset C A The basic indicator includes: 2 in. (50 mm) THREAD-O-RING nipple, plug assembly and indicator assembly. The extended indicator includes the same items, as well as an extended length indicator assembly. B A B C Weight Inch mm Inch mm Inch mm Lb. Kg. Part Number Basic: Extended: * * * * Special options available upon request. Factory lead times may vary. Flag Indicator with Manual Reset - Electrical Indicator with Auto Reset Combined C A B The basic indicator includes: 2 in. (50 mm) THREAD-O-RING nipple, plug assembly and flag/electrical indicator assembly. The electrical indicator consists of a weatherproof, explosion-proof, ATEX Certified MICRO SWITCH (LSX, doublepole, double-throw). The extended indicator includes the same items, as well as an extended length indicator assembly. A B C Weight Inch mm Inch mm Inch mm Lb. Kg. Part Number Basic: Extended: * * * * Special options available upon request. Factory lead times may vary. North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2015 All rights reserved. T.D. Williamson, Inc.

120 Dimensions and Part Numbers PIG-SIG V Scraper Passage Indicator p6 Electrical Indicator with Auto Reset A C B The basic indicator includes: 2 in. (50 mm) THREAD-O-RING nipple, plug assembly and electrical indicator assembly. The electrical indicator consists of a weatherproof, explosion-proof, ATEX Certified MICRO SWITCH (LSX, doublepole, double-throw). The extended indicator includes the same items, as well as an extended length indicator assembly. A B C Weight Inch mm Inch mm Inch mm Lb. Kg. Part Number Basic Extended: * * * * Special options available upon request. Factory lead times may vary. North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2015 All rights reserved. T.D. Williamson, Inc.

121 Specifications PIG-SIG V Scraper Passage Indicator p7 Electrical Indicator Switch Specifications MICRO SWITCH TM Electrical Diagram Electrical specifications: Double-Pole 2 N.O., 2 N.C. 3/4 in. conduit MOMENTARY Switch Specifications MICRO SWITCH Note: When a Flag Indicator is used in combination with the electrical switch, the switch will open or close when the flag is reset. Weatherproof, explosion-proof switch BXC4L for use either indoors or outdoors in hazardous atmospheres Temperature Range: -40º F (-40º C) to 185º F (85º C) Housing Materials: Seals: Aluminum and Zinc (Optional: Stainless Steel) Fluorosilicone NEMA Standards: 1, 3, 4, 4X, 6, 7, 9 and 13 UL listed (File No. E61730) and CSA certified (File No. LR57327): Electrical Ratings: ATEX Certification: Class I, Div. 1, Groups B, C, and D (Listings covered in Div. 1 are also covered in the same groups in Div. 2) Class II, Div. 1, Groups E, F and G (IEC standards: EExd IICT6, IP67) 10 amps continuous carry. Circuits on any one pole must be the same polarity EExd II T6 cateory II 2 GD, SIRA 00ATEX 1037X AC Volts - Pilot Duty: 600 VAC, 720VA Amps at 0.35 Power Factor Circuitry VAC Make Break Double-Pole, Double-Throw DC Volts - Pilot Duty: 240 VDC, 30 watts Make and Break Amps Circuitry VDC Inductive Resistive Double-Pole, Double-Throw North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2015 All rights reserved. T.D. Williamson, Inc.

122 Specifications PIG-SIG V Scraper Passage Indicator p8 Recommended Spare Parts List Component Quantity in Assembly Part Number O-ring, Plug Backup Ring O-ring, Cap Set Screw inch Hex Plug Holder* inch Hex Bit Brush Magnet Adapter* THREAD-O-RING Thread Chaser Magnet Holder Assm. with Filter Pack * If PIG-SIG V is to be installed or removed under pressure with removal tool, these component(s) will be required. If PIG-SIG V is to be installed with no pipeline pressure, these component(s) will be required. North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2015 All rights reserved. T.D. Williamson, Inc.

123 PIG-SIG NI Non-Intrusive Pig Passage Indicator ATEX, UL/CSA, IECEx Certified Bulletin No: Version: Supersedes: ( ) ECN: na Description The PIG-SIG NI produces simple and reliable, non-intrusive detection of pig passages anywhere within a pipeline system. The unit is easily banded onto the line, where it immediately begins scanning both for transmitter and permanent magnet-equipped pigs. No tapping is required, saving the operator time and money normally spent on the installation of conventional signal devices. (See five easy steps to install on page 4 of this bulletin.) When pigs pass the PIG-SIG NI, the time and date are clearly displayed on a high-contrast, easily viewed LCD screen, along with a flashing Recent Passage message. If multiple pig passages have occurred, dates and times of the last 10 passages may be retrieved by simply scrolling back through the PIG-SIG NI memory. The PIG-SIG NI also offers options that include enhanced long-distance viewing, even from helicopters or light aircraft. Features PIG-SIG NI Non-intrusive pig passage indicator The PIG-SIG NI standard enclosure is a fully certified aluminum, explosion-proof housing with a tempered glass window. The unit is attached to the pipeline with stainless steel bands and buckles. The Non-Intrusive Pig Passage Indicator is designed to detect TracMaster CD42-Tx pig location, tracking transmitters, and TDW Trip Magnets. It is bi-directional with auto reset on every passage. Detection speeds range from 0.1 meters per second to 20 meters per second. The PIG-SIG NI fits 3- through 72-inch (75 mm mm) line sizes and works on pipe wall thicknesses up to 1.5 inches (38.1 mm). The unit can operate for a full year on just two standard 1.5-volt DC D-cell alkaline batteries. Operating temperatures range from -58ºF to 176ºF (-50ºC to 80ºC) with standard alkaline battery-powered units capable of operating from -4ºF to 129.2ºF (-20ºC to 54ºC). A heater module option powered by 24 VDC input is required for units operating below -4ºF (-20ºC). The PIG-SIG NI electrical circuitry utilizes a double-pole, double-throw isolated contact closure that closes after pig passage and opens again in 15 seconds. Its maximum operating current is 2 amps at 30 volts DC. A portable version, which operates only on battery power, can removed from one location to another. The visual indicator is an LCD flash for one hour, constant for 11 hours, then auto reset. It can also be reset manually. Options The PIG-SIG NI makes the following options available to help customers meet individual application needs: Long-distance viewing that permits operators to see confirmation of pig passage up to 100 meters away or from a helicopter or light aircraft (24-volt DC units only). Upon request, a satellite link communication system called LineStat can be provided with the PIG-SIG NI. LineStat can remotely send s or text message through a satellite-based global service to one or more people when pig passages occur. Also available: 24-volt DC units for temperatures to -22ºF (-30ºC). Models for environmentally harsh conditions. Consult factory for options. System Certification: SIRA 13 ATEX1381 III2G Ex d mb IIB T5 Gb IP66 IECEx CSA /00 Ex d mb IIB T5 Gb IP66 UL/CSA Standard C22.2 No.30 rated for Class 1 Division 1 explosion-proof environments groups C and D, Tamb -50 C to +80 C Patented in the United States and in other countries. North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2014 All rights reserved. T.D. Williamson, Inc.

124 Sizes and Part Numbers PIG-SIG NI pg.2 The high-contrast LCD screen gives the operator a clear view of the time and date of pig passage. High-contrast LCD screen Indicator for various internal functions such as relay engagement, real time clock and user interface button Representation of the last 10 pig passages recorded in memory Passage time / current time Passage date / current date Either flashing or steady light indicator for recent pig passage Post (height built to customer specifications) Stainless steel buckles and bands Model - AA Option Model Type 01 3V D-Cell or 24VDC - Standard* 02 3V D-Cell - Portable 21 ATEX-Certified 3V D-Cell or 24VDC A A B B-CD Optional Features - D Option Feature 0 No Options 1 Internal Heater Option 2 Remote Indicator System 3 Internal Heater and Remote Indicator Extension Length - BB Extension Length in Feet Extension Length (in feet) No extension, BB = 00 NOTE: Rigid extension length available only up to 20 feet Extension Type - C Option Type 0 Rigid or No Extension 1 Flexible Extension Example is a PIG-SIG NI which includes the following: A 3V D-Cell or 24VDC - Standard An Extension length of 35 feet A Flexible Extension An Internal Heater Option Standard Unit (with Rigid Extension) Length Dimensions Extension Length (in feet) A Dim (inches) B Dim (inches) C Dim (inches) D Dim (inches) BB = BB = BB = BB = BB = BB = BB = BB = BB = BB = *Standard product is UL/SCA rated. North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2014 All rights reserved. T.D. Williamson, Inc.

125 Accessories & Replacement Parts PIG-SIG NI pg.3 Parts & Accessories Option Part Number Banding tool Standard carrying case Carrying case for Portable Unit Banding kit for 3-14 pipe includes 2 each 5-foot bands and 2 buckles Banding kit for pipe includes 2 each 10-foot bands and 2 buckles Banding kit for pipe includes 2 each 15-foot bands and 2 buckles Banding kit for pipe includes 2 each 20-foot bands and 2 buckles Heat Insulator Kit* Non-Conductive Isolator for Cathodic Protection *When the surface temperature of the pipe exceeds the maximum temperature rating of the unit, a Heat Insulator Kit must be installed between the bracket/antenna and the pipe. NOTE: When using the Heat Insulator, the next larger pipe size banding kit will be required. TDW Trip Magnets TDW PIG-SIG NI trip magnets are high-strength, rare-earth, permanent magnets which have been potted into a PVC or anodized aluminum outer shell. Each one has an integral 1/2-inch UNC stainless steel mounting stud. TDW PIG-SIG trip magnets are supplied in three sizes: M1 for pigs up to 14-inches, M2 for pigs 16- thru 30-inches, and M3 for pigs 32- thru 48-inches. For pipes above 48-inch in O.D., custom trip magnets can be designed. Other types of trip magnets can be provided to suit customer needs. Standard trip magnets are rated up to 150º C / 300º F. TDW PIG-SIG NI trip magnets will work effectively on virtually any brand or type of mechanical pig except spheres. Generally, the TDW PIG-SIG NI trip magnet should be mounted at or near the longitudinal axis of the pig, where it is not surrounded by metal. The long axis of the magnet should be along the central axis of the pig. On certain types of non-metallic pigs, the magnet can be placed within the body, such as TDW s OptionAll pigs. On foam pigs with built-in transmitter cavities, the magnet can be placed inside the cavity. On foam pigs without transmitter cavities, the magnet can be placed inside a hole that the user cuts into the rear of the pig. RTV Silicone may be used to seal the opening. For internal mounting dimensions, refer to the chart below. On small, mandrel-body type pigs, such as TDW s WCK Pig, it will be necessary to modify the rear of the pig to add a special mounting bracket to accept the magnet. On large-bodied pigs, such as TDW s VANTAGE Pig, a simple mounting plate can be added to the rear of the pig. The TDW PIG-SIG NI trip magnet requires a inch diameter mounting hole for attachment to a bracket or plate and should be secured with a 1/2-inch UNC lock-nut. The exact mounting component will vary from pig to pig. If the user cannot determine a suitable mounting, contact TDW and it will supply the necessary mounting parts for any brand or type of pig. Dimensions and Part Numbers Trip Minimum Opening Sizes Required Magnet Pipe Size Diameter Length Weight Inches mm Inches mm Inches mm Lbs. Kg. Part Number M1 up to 14 up to M M3 32 & above 800 & above North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2014 All rights reserved. T.D. Williamson, Inc.

126 Easy Installation PIG-SIG NI pg.4 5 Easy Steps to Install 1. Buckle and band preassembly. 2. Band attaching base to pipeline. 3. Tighten tension on bands. 4. Trim off excess banding. 5. Secure the buckles. North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2014 All rights reserved. T.D. Williamson, Inc.

127 D-500 Threaded Closures Sizes: 2- through 14-inch Bulletin No: Version: Cross Indexing No: n/a Supersedes: ( ) Options* D-500 Threaded Closure with Horizontal Hinge D-500 Threaded Closure without Hinge D-500 Threaded Closure with Vertical Hinge T.D. Williamson, Inc. is committed to providing you with the exact product to assist you in planning, budgeting and meeting the specifications for your individual application needs. The following options are available: Special Materials Material Certification Pressure Testing Special O-ring Material (standard O-ring material is Viton ) Taper-Bored to Match Pipe-Wall Thickness Special Design for Vertical Installation Horizontal hinges are standard on closures 10-inch and larger and are optional in sizes 4-, 6- and 8-inch * Consult factory for additional options. Description TDW D-500 Threaded Closures are easy-toopen closures suitable for use on pig traps, filters, strainers, scrubbers, heat exchangers, blowdowns, and many other types of vessels. They operate in fluids such as natural gas, refined products, water and crude oil. TDW D-500 Closures are available in sizes 2- through 14-inch. Sizes 2- through 8-inch without hinges are standard stock. Sizes 10- through 14-inch with horizontal hinges are standard stock. Vertical hinged closures in sizes 4- through 8-inch are special order. All closures are furnished with material test certificates upon request. TDW also designs, engineers and fabricates complete pigging systems that consist of launchers, receivers, closures, handling equipment, skids, pig passage indicators, launch pins, valves and piping, pigs, and spheres. TDW provides these systems in standard designs or built to the customer s specifications. Features The TDW D-500 Threaded Closure, available in sizes 2- through 14-inch, offers important advantages: A reliable seal. The large, cross-sectional diameter O-ring located on the barrel collar maintains a positive seal. Competitive price. The simple design of the TDW D-500 Threaded Closure means economical production. Quick delivery. TDW manufactures threaded closures in large quantities and keeps a wellstocked inventory to fill your orders promptly. Safety features. All threaded closures are equipped with a pressure warning lock, in accordance with UG-35 of ASME Sect. VIII, Div. 1, to alert the operator to the existence of internal pressure prior to opening the closure. In addition, the primary door seal is released before the threads are completely disengaged, which alerts the operator of internal pressure. Door Primary O-ring Seal Viton is a registered trademark of DuPont Performance Elastomers Pressure Warning Lock Barrel Collar USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries

128 Dimensions and Part Numbers D-500 Threaded Closures p2 G D Hub OD A F E Threaded Closure with Horizontal Hinge Sizes 4- through 14-inch Size A D E F G Hub OD Inches WT. lbs Part Number Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries

129 Dimensions and Part Numbers D-500 Threaded Closures p3 D Hub OD A Threaded Closure without Hinge Sizes 2- through 8-inch B Size A B D Hub OD WT. Inches Inches Inches Inches Inches Lbs. Part Number K J Threaded Closure with Vertical Hinge Sizes 4- through 8-inch D Hub OD I Size D I J K Hub OD WT. (Approx.) Inches Inches Inches Inches Inches Inches Lbs. Part Number Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries

130 Pressure & Temperature Ratings D-500 Threaded Closures p4 Pressure Ratings Stocked for Maximum Allowable Working Pressure in psi Nominal Pipe Weld on to B31.3 B31.4 / B31.8 ASME VIII Max Size (Inches) (Wall Thickness).40DF.50 DF.60 DF.72 DF DIV 1 Test Pressure 2 XS (.218) STD(.154) XS (.300) STD(.216) XS (.337) STD(.237) XS (.432) STD(.280) XS (.500) STD (.322) XS (.500) STD(.365) XS (.500) STD(.375) XS (.500) STD(.375) Temperature Ratings -20 F (-29 C) to 100 F (38 C) Temperatures greater than 100 F (38 C) and less than or equal to 500 F (242 C) at reduced MAWP with suitable O-Ring material. Replacement O-Rings Nominal Pipe Primary Seal O-Ring Pressure Warning Lock Size (Inches) Viton (Standard) Buna-N Screw Bushing Viton O-Ring (Std) Buna-N O-Ring Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries

131 D2000 Quick Opening Closures Sizes: 4-inch and larger Bulletin No: Version: Cross Indexing No: n/a Supercedes: ( ) Options T.D. Williamson, Inc. is committed to providing you with the exact product to assist you in planning, budgeting and meeting the specifications for your individual application needs. The following options are available: Special materials Material certification Pressure testing Special O-ring material (standard O-ring material is Buna-N) Description T.D. Williamson, Inc. s Clamp Ring Closures are quick-opening closures, easily operated by one person. The closure is designed primarily for horizontal installation, meaning the door swings open on the horizontal axis. However, the closure can be installed on a vertical installation. In the latter case, a counterbalance can be provided to facilitate opening. Features The Clamp Ring Closures, available in sizes 4- inches and larger, offer important advantages: A reliable seal The large, cross-sectional diameter O-ring located on the periphery of the closure s barrel collar provides positive sealing as well as protection from damage by tools, pigs or debris. D2000 Clamp Ring Closures various sizes Pressure warning device The Clamp Ring Closures are equipped with a pressure warning lock, in accordance with UG-35 of ASME Sect. VIII, Div. 1, to alert the operator to the existence of internal pressure prior to opening the closure. Fast, easy, safe operation One person can easily and quickly open or close the Clamp Ring Closures. Because it operates so easily, this closure is less time-consuming than other closures on the market. Because an operator must stand to the side when opening the pressure warning lock, clamp ring and door, the Clamp Ring Closures is safer to open than other closures that require an operator to stand in front of the door. Clamp Ring Closures feature a lever-type actuator on sizes 4- through 30-inches. Sizes 32-inches and larger have a door assist (ratchet binder). Closures smaller than 32-inches at higher pressure also may feature a door assist mechanism. Taper-bored to match pipe wall thickness Special design for vertical installation Larger sizes Pressure classes up to 2500# ASME Sect VIII, Div I Consult factory for optional items. Clamp Ring Barrel Collar Weld Bevel Large O-Ring Door ISO 9001 Certified USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries

132 Dimensions and Part Numbers 4- through 14-inch D2000 Clamp Ring Closures MAWP Size B31.4 B31.8 (Inches) Part Number Weld Bevel Thickness F=.72 (psi) F=.60 (psi) F=.50 (psi)* TP Max *Closures are available at 1480psi MAWP with.50 design factor, consult factory p2 NOTICE: New 19-67sz series part number is same as old 19-37sz series except that it now does NOT include the door O-ring. See additional O-ring part number table on page 7 for common O-ring options (must be ordered separately). Other O-ring materials are also available on a specialorder basis. Dimensions and Weights Size Wt (Lbs) H x W x L Part Number x 12 x x 14 x x 16 x x 19 x x 21 x x 22 x inch D2000 Clamp Ring Closure Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries

133 Dimensions and Part Numbers p3 16- through 30-inch-inches D2000 Clamp Ring Closures MAWP Size (Inches) B31.4 B31.8 Part Number Weld Bevel Thickness F=.72 (psi) F=.60 (psi) F=.50 (psi)* TP Max *Closures are available at 1480psi MAWP with.50 design factor, consult factory. Dimensions and Weights Size Weight (Lbs) H x W x L Part Number x 29 x x 31 x x 33 x x 35 x x 38 x inch D2000 Clamp Ring Closure Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries

134 Dimensions and Part Numbers p4 26- through 30-inch D2000 Clamp Ring Closures MAWP Size (Inches) B31.4 B31.8 Part Number Weld Bevel Thickness F=.72 (psi) F=.60 (psi) F=.50 (psi) TP Max *Closures are available at 1480psi MAWP with.50 design factor, consult factory. Dimensions and Weights Size Weight (Lbs) H x W x L Part Number x 44 x x 46 x x 48 x inch D2000 Clamp Ring Closure Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries

135 Dimensions and Part Numbers p5 32- through 42-inch D2000 Clamp Ring Closures MAWP Size B31.4 B31.8 (Inches) Part Number Weld Bevel Thickness F=.72 (psi) F=.60 (psi) F=.50 (psi)* TP Max *Closures are available at 1480psi MAWP with.50 design factor, consult factory. Dimensions and Weights Size Weight (Lbs) H x W x L Part Number x 51 x x 54 x x 56 x x 62 x x 64 x inch D2000 Clamp Ring Closure Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries

136 Dimensions and Part Numbers p6 44-inch and larger D2000 Clamp Ring Closures MAWP Size B31.4 B31.8 (Inches) Part Number Weld Bevel Thickness F=.72 (psi) F=.60 (psi) F=.50 (psi)* TP Max *Closures are available at 1480psi MAWP with.50 design factor, consult factory. Dimensions and Weights Size Weight (Lbs) H x W x L Part Number x 65 x x 67 x x 70 x inch D2000 Clamp Ring Closure Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries

137 Dimensions and Part Numbers p7 Replacement Main Seal O-Rings for Standard D2000 Clamp Ring Closures Closure Buna-N (Standard) Viton Pressure Warning Lock Components for Standard D-2000 Closures PWL O-Ring PWL O-Ring Closure Size PWL Screw PWL Bushing Buna-N (standard) Viton Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries

138 p8 Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries

139 SmartTrap Launchers & Receivers For Pipelines 6- through 36-inch Bulletin No: Version: Cross Indexing No: n/a Supersedes: ( ) Load Nozzle to allow safe and easy loading of inspection tools Eccentric Reducer to assure safe and easy loading & launching Line Size Mounting Flange - for mainline launcher connection (standard ASME class 600 flange) Hydrotested and Inspected designed for appropriate pipeline B31.8 and B31.4 codes Primer Coated ready for your topcoat SmartTrap Launching & Receiving Barrels Description Rugged and dependable TDW SmartTrap Launchers and Receivers are designed and built with the consistent high quality workmanship required to meet the demands of pipeline operators the world over. With decades of accumulated "hands-on" experience, TDW produces launchers and receivers designed by experts to handle the toughest field conditions. You can find them on offshore platforms, deep in the heart of remote mountain ranges, immersed in steamy tropical environments, in the hottest deserts and handling bitterly cold extremes above the Arctic Circle. TDW SmartTrap Launchers and Receivers are designed to meet all your pigging needs: Inline Inspection Pipeline Cleaning Batching Displacement. Standardized features included on TDW SmartTrap Launchers and Receivers make the pigging process a smooth and efficient procedure for piping system operators. With extra emphasis on safety, TD Williamson's easy-opening D2000 Clamp Ring Closures on all units and PIG-SIG IV Passage Indicators are included on all recievers. Features Appropriate Barrel Lengths - to accomodate all T.D. Williamson in-line inspection tools: Oversized Barrel to ease loading and handling of pigs Flanged Kicker Nozzle Adequately sized to ensure efficient launching TDW's D2000 Clamp Ring Closure (safe, quick opening closure) Flanged Equalization Nozzles (to enhance pig launch process) Multiple Vent Nozzles for safe purge of the entire unit Pressure Gauge Connection ready for gage installation Side Nozzles to further assist ease of loading North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2015 All rights reserved. T.D. Williamson, Inc.

140 Dimensions and Part Numbers SmartTrap Launchers p2 ASME Class 600 Lb. Line Size Closures Nominal AL B C D E F G M H I J K Note: Deminsions are approximate. AL and AR are shown in feet, all others shown in inches. Consult factory for alternative custom designs, codes, pressure classes, features and izes not shown North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2015 All rights reserved. T.D. Williamson, Inc.

141 Dimensions and Part Numbers SmartTrap Receivers p3 ASME Class 600 Lb. Line Size Closures Nominal AR B C D E F G M H I Note: Deminsions are approximate. AL and AR are shown in feet, all others shown in inches. Consult factory for alternative custom designs, codes, pressure classes, features and izes not shown North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2015 All rights reserved. T.D. Williamson, Inc.

142 p4 North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2015 All rights reserved. T.D. Williamson, Inc.

143 Complete Pig Systems Launching & Receiving Bulletin No: Date: February 1999 Cross Indexing No: n/a Supersedes: n/a Options T.D. Williamson, Inc., is committed to providing you with the exact product to assist you in planning, budgeting, and meeting your individual application needs. TDW can provide: Systems designed to handle corrosion inspection pigs. Automated packages to simplify operation. Special materials. ASME B31.4, B31.8, B31.3, ASME Section VIII Codes. Special surface preparation and finish. Horizontal, vertical, or sloped units. Complete Pig System Description Features TDW offers complete Pig Launching and Receiving Systems to meet your total pigging needs. These system packages include the Launcher/ Receiver, Closure, PIG-SIG Indicators, Bypass Piping, Valves, Handling Equipment if required, and Skid Mounted to ease field installation. All system packages are designed to the pipeline codes you require. Our standard Launching and Receiving Systems are complete packages. All components are assembled, tested, and ready for field installation. Units are furnished with TDW Closures. Units are furnished with the TDW PIG-SIG, installed. All nozzles are properly sized and located. Bypass piping is fabricated and connected for sure fit-up. All units are sandblasted and prime coated. Handling equipment is offered for handling larger pigs. Units designed, tested, and inspected to meet your code requirements. 100% weld inspection. Patented in the United States and in foreign countries. ISO 9001 Certified USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

144 Dimensions and Part Numbers Complete Pig Launching & Receiving Systems p2 C PIG-SIG Mainline Trap Valve Mainline Bypass Valve Pressure Gauge H Scraper Barred Tee Vent Valve Trap Kicker Valve Closure Launcher Drain Valve Pig Tray Jib Crane & Hoist Pig Launching Approx. Size C H L W Weight/Lbs. L Skid 12 x x W 16 x x x x x x Scraper Barred Tee Mainline Trap Valve Mainline Bypass Valve Vent Guage Trap Kicker Valve H Pig Receiving Approx. PIG-SIG Pressure Gauge L Drain Valve Receiver Closure C Pig Tray Jib Crane & Hoist Skid Size C H L W Weight/Lbs. 12 x x x x W Drip Pan 24 x x x x Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

145 Dimensions and Part Numbers Complete Pig Launching & Receiving Systems p3 C 1 PIG-SIG Sphere Barred Tee Mainline Valve Launch Pins Launcher Pressure Gauge Vent Valve Lifting Tongs C 2 H2 H 1 Pressure Equalization Valve Sphere Tray Closure Sphere Launching Approx. Size C1 C2 H1 H2 L W Weight/Lbs. L Jib Crane & Hoist Skid 12 x x Drip Pan W 20 x x x x C 1 PIG-SIG Sphere Barred Tee Mainline Valve PIG-SIG Vent Valve C 2 Receiver H 1 Pressure Gauge Lifting Tongs H 2 Sphere Tray Sphere Receiving Approx. Size C1 C2 H1 H2 L W Weight/Lbs. L Pressure Equalization Valve Closure Skid 12 x x Jib Crane & Hoist 20 x x W Drip Pan 30 x x Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

146 p4 Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

147 TDW Pig Washer Solvent-Free and Automated Bulletin No: Date: January 2007 Cross Indexing No: n/a Supersedes: (10/03) TDW Solvent-Free, Automated Pig Washer Low water shut off system Control voltage is 120 V, I phase, 60 cycle All primary power circuits are protected by fuses and breakers Sloped floor for easy cleanout Gear drive turntable is breaker protected and eliminates slippage Mechanical door seal (no rubber seals) Stainless steel bushed V pattern nozzles Options Description T.D. Williamson, Inc. provides you with unique products to assist with maintaining your pipelines in the most efficient manner. The TDW Solvent-Free, Automated Pig Washer allows you to clean pigs easily with this high-powered, industrial washing system. TDW s Solvent-Free, Automated Pig Washer removes paraffin, oil sludge and more with a heated water detergent solution. It also can be used to clean a variety of items found on jobs sites other than pigs. With a convenient front-load feature, the TDW Pig Washer is easy-to-use while saving you time and money. Features TDW Solvent-Free, Automated Pig Washers feature: Stainless steel pressure nozzles for precise 360 cleaning coverage NEMA-rated, enclosed control panel features IEC components with rotary illuminated cam switches. Meets NFPA wiring standards for numbering, sizing, color coding and overload protection Vertical seal-less pump means there are no seals to leak or replace Debris screen keeps tank free of large fragments and waste Seven day timer for programmable reheat of solution tank Sixty minute mechanical wash timer Industrial dial type thermostat Submersible incolloy resistance heating element(s) provides up to 180 F water TDW is committed to providing you with the exact product to assist in planning, budgeting and meeting your individual needs. Many options are available, including: Insulation package Steam exhaust system Rotary type lockable fused service disconnect Positioning/holding fixtures for small and/or multiple pigs being washed at one time Detergent with corrosion inhibitor USA: England: (44) Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of Magpie Systems, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

148 Dimensions and Part Numbers TDW Pig Washer p2 Machine Capacities Model Pump Heaters Tank Weight Power Number (HP) (KW) (Gallons) Capacity Source TDW-FL , V or 460 V/3PH TDW-FL , V or 460 V/3PH TDW-FL , V or 460 V/3PH TDW-FL , V or 460 V/3PH TDW-FL , V or 460 V/3PH Dimensions Model Turntable Diameter Inside Height Width Depth Height Weight Number Inches mm Inches mm Inches mm Inches mm Inches mm Lbs. Kgs. TDW-FL , TDW-FL , TDW-FL , TDW-FL , TDW-FL , Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and foreign countries / TM Trademark of T.D. Williamson, Inc. in the United States and foreign countries / Copyright All rights reserved T.D. Williamson, Inc. / Printed in USA

149 TracMaster Pro & Lite Multi-source Magnetic Pipeline Pig Location & Tracking System 620/720/770 Series Bulletin No: Version: Cross Indexing No: N/A Supersedes: Custom casing in water-resitant durable plastic and powder-coated aluminum, guaranteed to withstand the roughest pipeline conditions. Color graphics display operational temperature range of -4 to 158 F (-20 to 70 C). and -22 to 176 F (-30 to 80 C) in storage. Description The TracMaster Pro and TracMaster Lite are TDW's expanded product offering to ensure you have the right tools for pipeline pig locating and tracking needs. With sophisticated Digital Signal Processing (DSP) technology, the TracMaster Pro 770 tracks as many as eight (plus MFL) different transmitter frequencies simultaneously. [The 720 model tracks three frequencies (plus MFL).] The TracMaster Lite can track up to three transmitter frequencies. Features TracMaster Pro 720 & 770 Passage detection, pinpointing, and launch/ receive verification of magnetic-flux leakage (MFL) inspection tools are a breeze with the TracMaster Pro's advance permanenet magnet tracking and locating capabilities. Pigging activites are reported via a simple, graphic menu system and display that reveal the distinctive pulsing pattern of a passing pig plus quick, precise locations of stationary pigs. This information is provided for on-site viewing and printed reports, and is transferrable to desktop PCs. Works with TDW's existing large and robust transmitter family and the new TracMaster Pro X-Series multi-frequency transmitters, as well as transmitters from competitive systems. Pig passages are organized by their GPS time and date and are stored until erased from the system's flash memory. Recorded passages can be viewed, printed, downloaded to PC, and plotted with Google Maps. USB port for easy downloading and organization of jobs. TracMaster Pro may be monitored and operated from a remote location on a laptop or PC via TracMaster Pro Remote Control application. TracMaster Lite 620 A lower-cost, simpler alternative, the 620 model tracks up to three frequencies. Basic controls for configuring the system, including a single knob for adjusting reception sensitivity. Scrolling rows of LEDs instead of graphical interface. No MFL detection or Bluetooth/wireless communication capabilities. Optional remote antenna and remote signal light/flasher are available upon request. Fully-functional from 40 to +85 F. ( 40 to 29 C). For extreme cold environments, the TracMaster Lite 620 may be ordered in a cold-weather lithium battery configuration. North & South America: Europe / Africa / Middle East: Asia Pacific: Data subject to change without notice. / Dimensions not for construction unless certified. / Registered trademark of T.D. Williamson, Inc. in the United States and other countries. / TM Trademark of T.D. Williamson, Inc. in the United States and other countries. / Copyright 2017 All rights reserved. T.D. Williamson, Inc.