Emergency and Exit Solutions Product Selection Guide. LED Emergency Backup Fluorescent Emergency Ballasts Emergency Lights & Exit Signs

Transcription

1 Emergency and Exit Solutions Product Selection Guide LED Emergency Backup Fluorescent Emergency Ballasts Emergency Lights & Exit Signs

2 A Pioneer In Lighting Electronics North America Manufacturing California Manufacturing & Engineering Global Headquarters Hawthorne, CA Latin America Sales HQ Orlando European Manufacturing Poland European Design Center and European Sales HQ Alkmaar, Netherlands Middle East Sales HQ Dubai Fulham India R&D, Sales and Manufacturing Pune Asia Manufacturing Beijing, China Asian Design Center Shanghai, China Asia Pacific Sales HQ Hong Kong Corporate & Engineering Sales HQ Fulham is dedicated to intelligent, sustainable lighting solutions that give our users the power to create or install differentiated, clever lighting. Fulham s revered product quality and world-class customer responsiveness make us the preferred partner to over 3000 lighting manufacturers and distributors worldwide. American Innovation, Global Reach From our headquarters in Los Angeles, USA, and design centers in China, Europe, and India, our team of product managers and engineers work with our customers to conceive, design, and manufacture reliable, sustainable lighting solutions that bring cutting edge innovation to a global market. 2 Fulham Co., Inc (323)

3 Emergency and Exit Products LED Emergency Backup HotSpot1 4-5 Field-installable LED backup capability for existing luminaires OEM / DISTRIBUTION HotSpot2 6-7 LED backup for LED luminaires OEM HotSpot Plus 8 LED driver with integrated emergency backup capability OEM HotSpot Constant Power 9 Field-installable constant power emergency output OEM / DISTRIBUTION Fluorescent Emergency Ballasts FireHorse Universal Voltage Reliable fluorescent backup with CEC Title 20 models FireHorse Dual Voltage High performance fluorescent backup FireHorse Combo AC/Emergency Ballast 14 Fluorescent ballast with integrated emergency backup capability Emergency Lights and Exit Signs FHEM Series Emergency lights FHEX Series Exit signs FHEC Series Combo emergency lights and exit signs FHNY Series New York approved emergency lights and exit signs FHCH Series 21 Chicago approved emergency lights and exit signs Accessories 22 Vandal-resistant shields, wire guards, Spanish faceplates, and remote heads FREELITE 23 Photoluminescent exit signs Contact Us... Back Cover For specification sheets, installation instructions, and additional documentation, visit Or contact Fulham Client Services at for more information.

4 HOTSPOT1 LED EMERGENCY SYSTEM HotSpot1 modular systems add LED emergency lighting capability to existing luminaires. A complete system consists of an emergency driver, emergency module, and emergency battery pack. The HotSpot1 system operates independently of the luminaire s light source, ensuring compatibility with many types of luminaires. HotSpot1 Emergency Driver Model Number Input Voltage Input Frequency Input Current Input Wattage Compatible Batteries Battery Capacities Total LED Power Illumination Time FHS1-UNV-3.6L VAC (UNV) 50/60Hz 0.07 A 4W, 3.6 VDC 3AH, 4AH, 7AH 10W Min. HotSpot1 Emergency Modules MODEL NUMBER WATTS SHAPE APPLICATIONS FHS6-AR-3WL 3 Linear FHS1-AR4-WL 4 Linear FHS2-AR4-WC 4 Circular FHS5-AR-6W-CL 6 Cluster Wall sconce, ceiling flush mount, low level lighting Wall sconce, ceiling flush mount, low level lighting Recessed down lighting, wall sconce cylinder Circular lamp applications, e.g. Parking lot luminaires FHS3-AR-6W-SH 6 Small-H Wall sconce, ceiling flush mount FHS4-AR-8W-LH 8 Large-H Wall sconce, ceiling flush mount FHS3-AR-10W-SH 10 Small-H Wall sconce, ceiling flush mount FHS4-AR-10W-LH 10 Large-H Wall sconce, ceiling flush mount Surge Protection Over Current Protection Recharge Time C62.41 (TVS) Fuse 24 Hrs - 48 Hrs HotSpot1 Emergency Battery Packs MODEL NUMBER QTY/ TYPE OPERATION DURATION OUTPUT POWER/TIME DIMENSIONS (L x W x H) FHSBATT3-C3 3/C 3 Amp/Hrs 4W: 145min, 6W: 90min 3.1 x 2.00 x 1.00 LED Connection LED Output Protection Parallel Self Resetting PTC Output Classification UL1310/Class 2 FHSBATT3-D4 3/D 4 Amp/Hrs FHSBATT3-F7 3/F 7 Amp/Hrs FHSBATT3-F7L 3/F 7 Amp/Hrs 4W: 200min, 6W: 125min, 8W: 90min 4W: 360min, 6W: 235min, 8W: 175min, 10W: 135min 4W: 360min, 6W: 235min, 8W: 175min, 10W: 135min 4.00 x 2.50 x x 3.60 x x 1.56 x 1.37 LED Modules LINEAR CIRCULAR CLUSTER H-CONFIG FHS6-AR-3W-L (4.685 x ) FHS1-AR-4W-L (4.685 x ) FHS2-AR-4W-C (Exterior Ø7.174 Interior Ø5.990) FHS5-AR-6W-CL (3.380 x ) FHS3-AR-6W-SH (SMALL-H) FHS3-AR-10W-SH (SMALL-H) (3.380 x ) FHS3-AR-8W-LH (LARGE-H) FHS3-AR-10W-LH (LARGE-H) (5.711 x ) 4 Fulham Co., Inc

5 HOTSPOT1 UL CLASSIFIED LED EMERGENCY KITS HotSpot1 kits are UL Classified emergency lighting systems, ideal for troffers and approved for field or factory installation. A complete kit includes an emergency driver, emergency module, emergency battery, installation instructions, and all necessary hardware and labels. The system operates independently of the luminaire s light source and can be used with both fluorescent and LED tubes. Choose the right kit for the job according to lumen output, run time, and emergency module dimensions. Common Specifications Input Voltage 120V-277V (UNV) Output Short Circuit Protection Self Resetting PTC Surge Protection C62.41 (TVS) Recharge Time Required 24 hours Over Current Protection Fuse Battery Type 3.6VDC Input Current 0.07A Illumination Time Minimum 90 minutes Input Power <4W Output Classification UL 1310 / Class 2 Output Voltage 3.6V Ambient Temperature 0 C - 50 C HotSpot1 UL Classified LED Emergency Kits MODEL NUMBER WATTS LUMEN OUTPUT ESTIMATED RUN TIME MODULE TYPE MODULE DIMENSIONS (L x W) FHSKITT03LNC Mins Linear 4.68 x 0.82 FHSKITT03LND Mins Linear 4.68 x 0.82 FHSKITT03LNF Mins Linear 4.68 x 0.82 FHSKITT03LNFL Mins Linear 4.68 x 0.82 FHSKITT04LNC Mins Linear 4.68 x 0.82 FHSKITT04LND Mins Linear 4.68 x 0.82 FHSKITT04LNF Mins Linear 4.68 x 0.82 FHSKITT06SHC Mins Small-H 3.54 x 3.93 FHSKITT06SHD Mins Small-H 3.54 x 3.93 FHSKITT06SHF Mins Small-H 3.54 x 3.93 FHSKITT07LND* Mins Linear 4.68 x 0.82 FHSKITT07LNF* Mins Linear 4.68 x 0.82 FHSKITT07LNFL* Mins Linear 4.68 x 0.82 FHSKITT08LHD Mins Large-H 5.71 x 3.93 FHSKITT08LHF Mins Large-H 5.71 x 3.93 FHSKITT10LHF Mins Large-H 5.71 x 3.93 FHSKITT10SHF Mins Small-H 3.54 x 3.93 FHSKITT10LNF** Mins Linear 4.68 x 0.82 FHSKITT10LNFL** Mins Linear 4.68 x 0.82 *Includes 2 linkable 450lm linear modules ** Includes 3 linkable 450lm linear modules Linear Battery Fulham Co., Inc

6 HOTSPOT2 LED EMERGENCY SYSTEM The HotSpot2 emergency lighting system drives existing constant current LED modules during power outages. A complete system is composed of an emergency driver, emergency battery, and output wire harness. A wide range of lumen output and run times are available. HotSpot2 Emergency Drivers Model Number FHS2-UNV-36L FHS2-UNV-56S Output Working Voltage VDC VDC Dimensions (L x W x H) 5.34 x 1.69 x x 1.19 x 1 Input Voltage VAC Input Frequency 50/60Hz Input Current 0.07 A Surge Protection C62.41 (MOV) Over Current Protection Fuse Recharge Time 24-48Hrs LED Connection Series LED Output Protection Self Resetting PTC Output Classification UL1310/Class 2 Illumination Time Min LED Currents 100mA - 700mA Total LED Power 20W Wiring harnesses are used to set the output current to the LED module during emergency operation. HotSpot2 Emergency Wire Harnesses MODEL NUMBER ma MODEL NUMBER ma FHS-HARNESS FHS-HARNESS FHS-HARNESS FHS-HARNESS FHS-HARNESS FHS-HARNESS FHS-HARNESS FHS-HARNESS FHS-HARNESS FHS-HARNESS FHS-HARNESS FHS-HARNESS FHS-HARNESS FHS-HARNESS FHS-HARNESS FHS-HARNESS HotSpot2 Emergency Battery Packs MODEL MAX LOAD FOR 90 MIN. -36L -56S DIMENSIONS (L x W x H) CHEMISTRY CAPACITY COUNT RECHARGE TIME FHSBATT8-AA.9 4W 4W 5.23 x 2.39 x mAh 8 Cells 24Hrs FHSBATL3-1 4W 4W 3.48 x 2.29 x 0.91 LiFePo4 1000mAh 3 Cells 24Hrs FHSBATL6-.6 6W 4W 5.23 x 1.88 x 0.88 LiFePo4 1200mAh 6 Cells 24Hrs FHSBATL W 8W 3.48 x 2.70 x 0.91 LiFePo4 1500mAh 3 Cells 24Hrs FHSBATL3-1.5S 8W 8W 8.87 x 1.11 x 0.96 LiFePO4 1500mAh 3 Cells 32Hrs FHSBATL W 8W 7.52 x 1.88 x 0.88 LiFePo4 1800mAh 9 Cells 24Hrs FHSBATCC3-3* 10W 14W 6.00 x 3.60 x 1.55 LiFePo4 3000mAh 3 Cells 32Hrs FHSBATL W 14W 5.70 x 2.70 x 0.91 LiFePo4 3000mAh 6 Cells 32Hrs FHSBATL6-1.5L 16W 14W 7.89 x 1.50 x 1.19 LiFePo4 3000mAh 6 Cells 32Hrs FHSBATL6-1.5S 16W 14W 16.7 x 1.11 x 0.96 LifePO4 3000mAh 6 Cells 32Hrs FHSBATT8-C3 16W 16W 4.15 x 3.29 x mAh 8 Cells 32Hrs FHSBATT8-C3L 16W 16W 7.89 x 2.06 x mAh 8 Cells 32Hrs FHSBATL3-3 16W 16W 4.39 x 2.76 x 1.22 LiFePo4 3000mAh 3 Cells 32Hrs FHSBATT8-D4 20W 20W 4.95 x 3.84 x mAh 8 Cells 32Hrs FHSBATL6-3 20W 20W 7.52 x 2.76 x 1.22 LiFePo4 6000mAh 6 Cells 48Hrs FHSBATL6-3L 20W 20W 7.94 x 2.09 x 1.19 LiFePo4 6000mAh 6 Cells 48Hrs *COLD PACK : -20 C minimum operating temperature Ordering a complete HotSpot2 Emergency System: Select a DRIVER (FHS2-UNV-36L or FHS2-UNV-56S) based on dimensions and output voltage Select a based on dimensions, total capacity, and max load Select a WIRING HARNESS based on required current and run time 6 Fulham Co., Inc

7 12 LEAD EXTENSIONS HOTSPOT2 ACCESSORIES Allow HotSpot2 drivers and batteries to be mounted farther apart HotSpot2 Emergency 12 Lead Extensions TYPE LEAD EXTENSION TYPE LEAD EXTENSION FHSBATT8-AA.9 FHS-EXT12L FHSBATL6-.6 FHS-EXT12M FHSBATT8-C3 FHS-EXT12M FHSBATL6-1.5 FHS-EXT12M FHSBATT8-C3L FHS-EXT12H FHSBATL6-1.5L FHS-EXT12M FHSBATT8-D4 FHS-EXT12M FHSBATL6-3 FHS-EXT12M FHSBATL3-1 FHS-EXT12M FHSBATL6-3L FHS-EXT12M FHSBATL3-1.5 FHS-EXT12M FHSBATL9-.6 FHS-EXT12M FHSBATL3-3 FHS-EXT12M EMERGENCY PACK MOUNTING BRACKETS Optional mounting brackets for linear HotSpot2 batteries. These batteries do not have mounting tabs HotSpot2 Emergency Battery Pack Mounting Brackets MOUNTING BRACKET PART NUMBER FHSBATSC8-C3L FHSBATSC6-3L FHSBATSC6-1.5L FOR USE WITH PACK FHSBATT8-C3L FHSBATL6-3L FHSBATL6-1.5L WET TEST SWITCH Part Number: FHS-TSTWL IP67 test switch for use with HotSpot drivers Allows for test switch to be exposed on outdoor rated luminaires WALLPLATE FOR REMOTE MOUNT TEST SWITCH Part number: FHSWLPWH Allows remote mounting of test switch for HotSpot and FireHorse products For use with recessed cans and other difficult to access luminaires SIDE ENCLOSURE FOR FHS2-UNV-36L Part number: FHWCHS2 Covers the input leads of the driver to meet code when used in a downlight application in which the HotSpot driver is mounted to a junction box. Fulham Co., Inc

8 HOTSPOT PLUS LED DRIVER PLUS EMERGENCY SYSTEM ALL-IN-ONE The HotSpot Plus is a 40W constant current LED driver with integrated emergency driver and replaceable battery. Under normal conditions, HotSpot Plus functions as a 0-10V dimmable constant current driver, with a programmable output current range of mA. During a power outage, this all-in-one system automatically engages an integrated backup battery, which can provide 5W of power for 180 minutes or 10W for 90 minutes. Available in three form factors for maximum flexibility, HotSpot Plus is the industry s smallest complete emergency solution. Single unit combines 0-10V dimmable LED driver and emergency LED driver with replaceable battery Lowers costs by eliminating need to install separate emergency system and driver Simple installation reduces assembly line confusion and wiring errors Output current programmable in 1mA increments using TPSB-100 handheld controller Common Specifications Input Current 120VAC, 277VAC Power Factor >0.9 THD <20% Dimming Range 100% - 1% Battery Type Battery Capacity Recharge Time Warranty Advanced Features LiFePO4 6.4VDC 3200mAh 12 Hours 5 years Illuminated test switch, switchable self-diagnostics, user-selectable emergency power level (700 lumens for 180 min or 1400 lumens for 90 min using a 140 LPW LED module) HotSpot Plus LED Driver Plus Emergency System Models WATTS OUTPUT CURRENT (MA) OUTPUT VOLTAGE (VDC) MODEL NUMBER INPUT VOLTAGE (VAC) DIMMING TYPE CHANNELS DIMENSIONS (L x W x H) CASE TYPE FHSAC1-UNV-40C FHSAC1-UNV-40BLS FHSAC1-UNV-40L (50/60Hz) (50/60Hz) (50/60Hz) 0-10V x 3.0 x 1.10 Compact w/end Leads 0-10V x 3.0 x 1.54 Compact w/bottom Leads 0-10V x 2.4 x 1.34 Linear w/end Leads 8 Fulham Co., Inc

9 HOTSPOT CONSTANT POWER PROGRAMMABLE LED EMERGENCY DRIVER Provides programmable, constant power emergency output for existing LED modules. Advanced features include self-diagnostics and detailed data logging. Meets CEC Title 20 battery charger requirements. Compatible with Fulham SmartSet Programming Platform and TPSB-100 handheld controller. Complete system includes emergency driver and emergency battery. Specifications Model Number FHSCP-UNV-10P-L-SD RFI/EMI FCC Part 15A Non-Consumer Input Voltage VAC, 50/60Hz Number of Output Channels 1 Channel Input Current 0.06A Max. Output Type Class 2 Output Power 1-10W Battery Type LiFePO4 9.6VDC Output Current 620mA Max. Battery Recharge Time 12 Hours Output Voltage Range 16-55VDC Dimension 7.89 x 2.05 x 1.17 Ambient Operating Temperature Range 10 C to 55 C (50 F to 131 F) Input Surge Protection HotSpot Constant Power Programmable Battery Packs Line-Neutral 2kV, Line & Neutral-Ground 2kV MODEL NUMBER MAX LOAD FOR 90 MIN CAPACITY DIMENSIONS (L x W x H) FHSBATL3-1.5-SD 5W 1500mAh 3.48 x 2.76 x 0.99 FHSBATL3-3-SD 10W 3000mAh 4.39 x 2.82 x 1.3 FHSBATL9-.6-SD 6W 1800mAh 7.52 x 1.87 x 0.85 FHSBATL6-1.5L-SD* 10W 3000mAh 7.89 x 1.56 x 0.92 *Does not include mounting means. Use mounting bracket FHSBATSC6-1.5L HOTSPOT CONSTANT POWER LED EMERGENCY DRIVER Adds field-installable emergency capability to LED luminaires. Provides a constant source of emergency backup power to the luminaire s LED modules for at least 90 minutes. The culus Classified driver is designed for flexibility, with multiple mounting options, a conduit feed, and an illuminated test switch. Common Specifications Input Voltage V (UNV) Ambient Temperature 0ºC - 50ºC Output Voltage 20-50VDC Output Type Class 2 Surge Protection Per C62.41 (TVS) RFI/EMI FCC Part 15A Non-Consumer Recharge Time 24 hours Illumination Time Minimum 90 minutes HotSpot Constant Power LED Emergency Driver Models MODEL OUTPUT POWER (W) OUTPUT LUMENS* OUTPUT CURRENT (ma) DIMENSIONS (L x W x H) FHSCP-UNV-5WL x 2.6 x 1.5 FHSCP-UNV-7.8WL x 2.6 x 1.5 FHSCP-UNV-10.7WL x 2.6 x 1.5 FHSCP-UNV-13.7WL x 2.6 x 1.5 FHSCP-UNV-17WL x 2.6 x 1.5 * Based on 160 lumens/watt light source Fulham Co., Inc

10 UNIVERSAL VOLTAGE FLUORESCENT EMERGENCY BALLASTS Provides emergency backup power for wide range of fluorescent lamps CEC Title 20 compliant models available Integrated LED power indicator/test switch Factory or field installation UL listed for damp locations Vandal-resistant, sealed, painted steel case type Common Specifications Operating Voltage Universal V Operating Temp Range 0 C - 55 C Fixture Wiring Switched or Unswitched Frequency 50/60Hz Operating Temp Range FH7 20 C - 55 C Installation Factory or Field Listing Emergency Test Switch LED Push Button Battery Type High Temp. Long Life Rechargable Alternate Listing Inverter/ Charger Pack Indicator Type LED Type Minimum Emergency Operation 90 Mins. Regulatory Approval culus Ballast Compatibility Electronic/Energy Saving Min. Required Charging Time 24 Hours Regulatory Compliance Meets or Exceeds N.E.C./LSC Special Ballast Compatibility Electronic Dimming Type/End-of-Life Case Construction Vandal Resistant Painted Steel Location Rating Damp Lamp Compatibility Fluorescent Type/ TCLP Minimum Illumination Time 90 min End of Life Time Delay Yes Output Type AC Recharge Time 25 Hrs. Universal Voltage Fluorescent Emergency Ballasts MODEL NUMBER INITIAL LUMEN OUTPUT AC INPUT CHARGE CURRENT (120VAC) CHARGE CURRENT (277VAC) VOLTAGE RATING DIMENSIONS (L x W x H) WEIGHT (LBS) FH7-UNV-500L 500 3W 50mA Max. 30mA Max. 6.0VDC 12.0Wh 9.60 x 2.16 x FH11-UNV-750L 750 3W 50mA Max. 30mA Max. 3.6VDC 14.4Wh 9.37 x 2.33 x FH12-UNV-1400L W 60mA Max. 40mA Max. 12.0VDC 24.0Wh x 2.16 x FH7-UNV-500L-CEC* W 50mA Max. 30mA Max. 6.0VDC 12.0Wh 9.60 x 2.16 x FH11-UNV-750L-CEC* W 50mA Max. 30mA Max. 3.6VDC 14.4Wh 9.37 x 2.33 x FH12-UNV-1400L-CEC* W 60mA Max. 40mA Max. 12.0VDC 24.0Wh x 2.16 x * California Energy Commission Small Battery Charger System Title 20 compliant WALLPLATE FOR REMOTE MOUNT TEST SWITCH Part number: FHSWLPWH Allows remote mounting of test switch for HotSpot and FireHorse products For use with recessed cans and other difficult to access luminaires 10 Fulham Co., Inc

11 UNIVERSAL VOLTAGE FLUORESCENT EMERGENCY BALLASTS Lamp Operation Lamp Operation FH7 FH11 FH12 FT - 4 pin FT18W 2 FT24W or 2 FT27W or 2 FT36W or 2 FT39W or 2 FT40W FT50W FT55W CFQ13W CFQ18W CFQ - 4 pin or 2 CFQ26W 1 or 2 CFTR - 4 pin CFTR13W 2 CFTR18W 2 CFTR26W 1 or 2 CFTR32W 1 or 2 CFTR42W 1 CFM - 4 pin CFM57W 1 Circular-FCRT5 22WCRT WCRT WCRT5 1 Circular-FCRT9 40WCRT9 1 2D21W 1 2D - 4 pin F24T5HO F39T5HO F49T5HO F54T5HO FH7 FH11 FH12 T5-HO High Output or T8- Standard F17T8 2 F25T or 2 FBO24/31T8 1 F32T or 2 F32T8 ES (25/28/30W) F40T F58T8 F70T8 T8-HO High Output 1 1 F60T8HO 1 1 F72T8HO 1 T8-SL Slim Line F96T8SL 1 1 F48T10VHO T10-VHO Very High Output T12-Standard F20T12 2 F30T12 2 F40T12 1 or 2 F60T12HO F72T12HO F84T12HO F96T12HO (95/110W) T12-HO High Output T12-SL Slim Line F96T12SL D28W or 2 2D38W 1 1 or 2 T5-Standard F14T or 2 F21T5 F28T F35T5 1 1 Fulham Co., Inc

12 DUAL VOLTAGE FLUORESCENT EMERGENCY BALLASTS Provides emergency backup power for wide range of fluorescent lamps End of Life (EOL) Time Delay Factory or field installation Low profile models for integral mounting Damp location rated 2, 3 and 5 year warranties Common Specifications Operating Voltage Dual 120 / 277V Operating Temp Range 0 C - 55 C Fixture Wiring Switched or Unswitched Frequency 50/60Hz Test Switch LED Push Button Installation Factory or Field Listing Emergency Indicator Type LED Type Battery Type Alternate Listing Regulatory Approval Regulatory Compliance Inverter/ Charger Pack culus Meets or Exceeds N.E.C./LSC Ballast Compatibility Special Ballast Compatibility Lamp Compatibility Electronic/Energy Saving Electronic Dimming Type/End-of-Life Fluorescent Type/ TCLP Minimum Emergency Operation Min. Required Charging Time Case Construction High Temp. Long Life Rechargable 90 Mins. 24 Hours Vandal Resistant Painted Steel Dual Voltage Fluorescent Emergency Ballasts Models MODEL NUMBER INITIAL LUMEN OUTPUT EOL TIME DELAY AC INPUT (W) CHARGING CURRENT VOLTAGE (VDC) RATING (WH) WARRANTY DIMENSIONS (L x W x H) BALLAST WEIGHT (LBS.) CASE QTY CARTON QTY FH1-DUAL-750CFL 750 No mA Max Yrs. 9.4 x 2.4 x FH3-DUAL-450L 450 No mA Max Yrs x 2.36 x FH4-DUAL-700L 700 No mA Max Yrs. 9.4 x 2.4 x FH5-DUAL-1400L 1400 No mA Max. 6.0V Yrs x 2.4 x FH8-DUAL-1300L 1300 Yes mA Max Yrs x 1.3 x FH9-DUAL-800L 800 Yes mA Max Yrs x 1.3 x FH10-DUAL-500L 500 Yes mA Max Yrs x 1.2 x Fulham Co., Inc

13 LAMP OPERATION DUAL VOLTAGE FLUORESCENT EMERGENCY BALLASTS Lamp Operation Lamp Operation LUMEN OUTPUT FT18W 1 or 2 FT24W 1 FH1 FH3 FH4 FH5 FH8 FH9 FH FT36W or 2 1 or FT40W FT50W FT55W FT80W CFQ13W 1 or 2 FT CFQ - 4 pin CFQ18W 1 or 2 1 or 2 CFQ21W CFQ26W 1 2 CFTR - 4 pin CFTR13W 2 CFTR18W 1 or 2 CFTR26W 1 or 2 CFTR32W 1 CFTR42W 1 1 CFTR57W 1 1 Circular-FCRT5 22WCRT5 1 or WCRT5 1 1 or WCRT Circular-FCRT9 20WCRT9 1 1 or 2 1 or 2 32WCRT9 1 or WCRT D10W 2D16W 2D21W 2D - 4 pin 2D28W 1 or 2 1 or 2 1 or 2 1 2D38W 1 1 or or 2 2D55W 1 T5-Standard F14T5 1 or or 2 F21T or or F28T F35T T5-HO High Output F24T5HO F39T5HO F54T5HO LUMEN OUTPUT FH1 FH3 FH4 FH5 FH8 FH9 FH T8-Standard F17T8 2 1 or 2 F25T or 2 1 or 2 1 or 2 FB29T8 1 FB32T8 1 1 or F32T or 2 1 or F32T8 ES (28W) 1 or 2 1 or 2 1 F40T or F51T8 1 F59T8 1 F44T8HO F86T8HO T8-HO High Output 1 T8-SL Slim Line F96T8SL 1 F48T10VHO (110W) T10-VHO Very High Output 1 1 T12 -Standard F20T F25T12 1 or 2 F30T12 1 or F34T FB34T or FB40T F40T12ES (34W) 1 or 2 F40T or 2 1 or F75T12 F85T12 F48T12HO F60T12HO F72T12HO 1 T12-HO High Output F84T12HO 1 F96T12HO T12-SL Slim Line F60T12SL 1 F72T12SL 1 F96T12SL 1 Fulham Co., Inc

14 COMBO AC/EMERGENCY FLUORESCENT BALLASTS Inventory reduction & installation cost-savings based on combination design Multiple-region certifications (culus, CE) Modular battery allows simple replacement in the field Pre-connected battery eliminates need for contractor to connect external battery in the field Common Specifications Operating Voltage 120V - 277V (UNV) Battery Voltage 6V Frequency 50/60Hz Battery Capacity 2.0Ah ATHD <20% Combo AC/Emergency Fluorescent Ballasts Models MODEL NUMBER # OF LAMPS LAMP TYPE FHR1-UNV-218T8-L 1 or 2 F17T8 (U.S.), F18T8 (Europe) FHR2-UNV-236T8-L 1 or 2 F32T8 (U.S.), F36T8 (Europe) Push-in Connectors Illuminated Test Switch Push-in Connectors Illuminated Test Switch 14 Fulham Co., Inc

15 EMERGENCY LIGHTS Accessories Page 22 Part Numbering Example FHEX21 W R EM SD Series Housing Color Letter Color Operation Options Symbol Key Damp Location Rated WET Wet Location Rated LED LED Heads RC Remote Head Capability SLA Sealed Lead Acid battery type battery type NiMH Ni-MH battery type ESP Spanish Faceplate Available NEW YORK APPROVED New York approved CHICAGO APPROVED Chicago approved SD Self-Test/Diagnostic option FHEM10 SERIES HOUSING COLOR OPTIONS FHEM10 H = High Lumen Reflector Low profile, thermoplastic emergency lighting unit with adjustable LED lamp heads LED FHEM11 SERIES HOUSING COLOR OPTIONS FHEM11 SD = Self-Diagnostic RC = Remote Capable Contemporary, low profile, quick-installing emergency light with fully adjustable heads RC SLA SD FHEM12 SERIES HOUSING COLOR OPERATION FHEM12 Blank = Damp Location W = Wet Location Damp location rated LED emergency fixture (wet location model also available). UL Listed, Dual Voltage (120V or 277V). Maintenance-free 3.6V Battery, Push-to-Test Switch, adjustable glare-free heads, snap fit construction installs quickly. 90 min. emergency operation. WET LED Damp Location Version Wet Location Version Fulham Co., Inc

16 EMERGENCY LIGHTS Accessories Page 22 FHEM13 SERIES FHEM13 HOUSING COLOR Low profile, compact emergency light with fixed optics provides a consistent, predictable aiming pattern for wall or ceiling mounting SLA FHEM14 SERIES VOLTAGE OUTPUT LAMP WATTAGE FHEM V 50W 2 x 9W FHEM V 100W 2 x 9W FHEM V 50W 2 x 7.2W High Capacity units with larger batteries to operate additional remote lamp heads or extended emergency operation. 12 Volt units are ideal for operating remote lamps with long runs, minimizing voltage drop issues. RC SLA W W FHEM15 SERIES FHEM15 Rugged, sealed and gasketed emergency units are ideal for wet or corrosive environments, providing resistance to dust, hose-downs, water spray and splashing water RC SLA FHEM16 SERIES HOUSING COLOR OPTIONS FHEM16 SD= Self-Diagnostic RC=Remote Capable LED, dual voltage (120V/277V) emergency fixture with battery that operates for 90 minutes in emergency mode. UL listed and damp location rated, available in white or black and with self diagnostic and remote capable options available LED 16 Fulham Co., Inc

17 EXIT SIGNS Accessories Page 22 FHEX20 Thermoplastic Micro LED SERIES HOUSING COLOR LETTER COLOR OPERATION OPTIONS FHEX20 AC = AC Only EM = Battery Back Up RC = Remote Capable Slim profile thermoplastic LED exit sign offers long lamp life, energy efficiency and uniform illumination in an economical package RC ESP FHEX21 Thermoplastic LED SERIES HOUSING COLOR LETTER COLOR OPERATION OPTIONS FHEX21 AC = AC Only EM = Battery Back Up SD = Self-Diagnostic (On EM Only) SF = Spanish Faceplate Thin-profile, thermoplastic LED exit sign offers long life, energy efficiency and uniform illumination in an economical package ESP SD FHEX23 Recessed Edge Lit SERIES HOUSING COLOR # OF FACES LETTER COLOR OPERATION FHEX23 A = Aluminum S = Single D = Dual AC = AC Only EM = Battery Back Up Architectural LED Edge-Lit exit signs recess into the ceiling, offering superior aesthetic appeal. SLA FHEX24 Surface Edge Lit SERIES HOUSING COLOR # OF FACES LETTER COLOR OPERATION FHEX24 A = Aluminum S = Single D = Dual AC = AC Only EM = Battery Back Up Ideal for architectural applications, surface mount Edge-Lit LED exit signs offer specification-grade aesthetics with infield installation flexibility SLA Fulham Co., Inc

18 EXIT SIGNS Accessories Page 22 FHEX25 Wet Location SERIES LETTER COLOR OPERATION FHEX25 AC = AC Only EM = Battery Back Up Wet location approved exit signs feature an enclosure resistant to corrosive atmospheres, non-hazardous dust environments, hose-downs, water spray and splashing water WET FHEX26 Slim Wet Location LED SERIES LETTER COLOR OPTIONS FHEX26 RC = Remote Capable Features a compact enclosure that is resistant to nonhazardous dust environments, corrosive atmospheres, hosedown water spray, or splashing water WET RC COMBO EMERGENCY LIGHTS & EXIT SIGNS FHEC30 - Thermoplastic Micro LED Combo SERIES HOUSING COLOR LETTER COLOR OPTIONS FHEC30 H = High Lumen Reflector Energy-saving combination LED exit sign and emergency lighting unit in one compact, modern design. Flexibility and multi-function capabilities include LED performance on both the exit sign and the lamp heads LED ESP FHEC31 - Thermoplastic Square Head Combo 5.4W T5 Wedge Base SERIES HOUSING COLOR LETTER COLOR OPTIONS FHEC31 SD= Self-Diagnostic RC=Remote Capable SF = Spanish Faceplate Energy saving combination LED exit sign and emergency lighting unit provides contemporary design, flexibility and multi-function capabilities RC SLA SD Fulham Co., Inc

19 COMBO EMERGENCY LIGHTS & EXIT SIGNS Accessories Page 22 FHEC32 - Wet Location Combo Round Head 5.4W T5 Wedge Base SERIES FHEC32 LETTER COLOR Wet location LED exit sign and emergency unit includes two sealed and gasketed, weatherproof lamp heads with tempered glass lenses. WET FHEC33 - Thermoplastic LED Combo SERIES HOUSING COLOR LETTER COLOR OPTIONS FHEC33 SD= Self-Diagnostic RC=Remote Capable Injection molded, high impact, thermoplastic LED Exit Combo. Includes 2 factory-installed, adjustable square 12W high output LED heads LED RC ESP FHEC34 - Slim Wet Location LED Combo SERIES LETTER COLOR OPTIONS FHEC34 RC = Remote Capable UL 924 listed for wet location. Includes two sealed and gasketed 1.17W weatherproof LED lamp heads. Features a compact enclosure that is resistant to nonhazardous dust environments, corrosive atmospheres, hose-down water spray, or splashing water WET LED RC FHEC35 - Thermoplastic Slim LED Fully Adjustable Combo SERIES LETTER COLOR OPTIONS FHEC35 SD= Self-Diagnostic* RC=Remote Capable* *Options may be combined Slim profile, thermoplastic LED Exit/Emergency Combo. Includes standard faceplate and fully adjustable LED lamp heads, all in a slender package LED RC SD Fulham Co., Inc

20 NEW YORK APPROVED EMERGENCY LIGHTS & EXIT SIGNS Accessories Page 22 FHNY10 SERIES FHNY1029 FHNY1039 FHNY10312 DESCRIPTION 6V, 18-W, lead-acid battery, two lamp heads 6V, 27-W, lead-acid battery, three lamp heads 12V, 50-W, lead-acid battery, three lamp heads Steel New York City approved emergency light. Ideal for hospitals, office buildings, and schools. SLA NEW YORK APPROVED FHNY11 SERIES FHNY11 DESCRIPTION 9.6V, 3W, battery, two lamp heads Steel emergency light with LED Heads designed for new or retrofit applications that need to meet New York City Standards. Ideal for hospitals, office buildings and schools LED NEW YORK APPROVED FHNY20 SERIES FHNY20AC FHNY20EM DESCRIPTION 20-GA steel, white housing, universal face, red lettering, AC only 20-GA steel, white housing, universal face, red lettering, battery back up 8 Steel LED exit sign designed to New York City specifications NEW YORK APPROVED FHNY23 SERIES HOUSING COLOR # OF FACES OPERATION FHNY23 A = Aluminum S = Single D = Dual AC = AC Only EM = Battery Back Up 8 Edge-lit exit sign designed to New York City specifications, provides superior aesthetics in a surface-mount design. Excellent LED performance and energy efficiency combined with infield installation flexibility SLA NEW YORK APPROVED Fulham Co., Inc

21 FHNY30 SERIES FHNY30 DESCRIPTION Combo, 20-GA steel, white housing, single face, red lettering, battery back up. This model is shipped with a third installable head. All three heads can be used at one time, if desired. 8 Steel LED exit sign and emergency unit combo is designed to New York City specifications. SLA NEW YORK APPROVED FHNY31 SERIES FHNY31 DESCRIPTION Combo, 20-GA steel, white housing, single face, red lettering, Ni-MH battery, Three 9.6V, 3W LED lamp heads Steel New York City approved LED exit sign and emergency unit combo with LED heads. Ideal for hospitals, office buildings and schools LED NiMH NEW YORK APPROVED CHICAGO APPROVED EMERGENCY LIGHTS & EXIT SIGNS Accessories Page 22 FHCH10 SERIES FHCH10 DESCRIPTION 6V, 24W, sealed lead acid battery, two lamp heads Steel emergency light designed for new construction or retrofit applications that must meet all City of Chicago listing requirements. Ideal for wall-mounted applications in stores, offices, hospitals and schools. SLA CHICAGO APPROVED FHCH20 SERIES # OF FACES DIRECTIONAL OPERATION FHCH20 FHCHGONA = No Arrow FHCHGORA = Right Arrow FHCHGOLA = Left Arrow FHCHGODA = Double Arrow S = Single D = Dual ADDITIONAL FACEPLATES NA = No Arrow DA = Double Arrow LA = Left Arrow RA = Right Arrow FHCHGOST = Stairs FHCHGOSTRA = Stairs Right Arrow FHCHGOSTLA = Stairs Left Arrow AC = AC Only EM = Battery Back Up Heavy duty steel exit signs are Chicago approved. Ideal for applications such as schools, offices, retail and hospitals CHICAGO APPROVED Fulham Co., Inc

22 ACCESSORIES Vandal-Resistant Shields Model Number FHEMVS FHEXVS FHECVS Compatible with FHEM10 FHEM11 FHEM13 FHEX20 FHEX21 FHEC30 FHEC31 FHEMVS (Fixture Not Included) FHEXVS, FHECVS (Exit Sign Not Included) Wire Guards Model Number FHEMWG FHEXWG FHECWG Compatible with FHEM10 FHEM11 FHEM13 FHEX20 FHEX21 FHEC30 FHEC31 FHEMWG (Fixture Not Included) FHEXWG, FHECWG (Fixture Not Included) Spanish Faceplates Model Number FHE20SFG FHE20SFR Compatible with FHEX20 FHEC30 FHEC33 For FHEX21 and FHEC31, use option SF in part number FHE20SFG FHE20SFR Remote Heads Low Profile Thermoplastic MODEL NUMBER HEADS VOLTAGE WATTS/HEAD COMPATIBLE WITH FHEM10-RH1-3V V 1.72 FHEM16, FHEX20, FHEC33, FHEC35 FHEM10-RH2-3V FHEM16, FHEX20, FHEC33, FHEC35 Thermoplastic FHEM11-RH1-6V5 1 6V 5.4 FHEM11, FHEC31 Damp Location Wet Location Low Profile Square Head FHEM12-RH1-3V V 1.17 FHEC33, FHEX26, FHEC34, FHEX20 FHEM12-RH2-3V FHEC33, FHEX26, FHEC34, FHEX20 FHEM15-RH1-6V7 1 6V 7.2 FHEM15 FHEM15-RH2-6V7 2 6V 14.4 FHEM15 FHEM16-RH1-3V FHEM16, FHEX20, FHEC33, FHEC35 FHEM16-RH2-3V FHEM16, FHEX20, FHEC33, FHEC35 FHEM10RH1 FHEM10RH2 FHEM11RH1 FHEM12RH1 FHEM12RH2 FHEM15RH1 FHEM15RH2 FHEM16RH1 FHEM16RH2 22 Fulham Co., Inc

23 PHOTOLUMINESCENT EXIT SIGNS & ACCESSORIES LEED points qualified Manufactured in the United States Reduces emergency generator loads Meets low location egress requirements Flexibility of design No energy cost Uses no electricity Stores and re-emits ambient light - minimum 5 foot candles required. No maintenance cost No disposal cost Reduces overhead costs Non-radioactive (Tritium free) Recyclable Lower labor and material cost No conduit or wire to run No emergency circuit required Standard bracket options for easy mounting FLPL50-50 Viewing Distance with Photoluminescent Lettering SERIES # OF FACES BACKGROUND COLOR FRAME COLOR FLPL50 S = Single D = Dual SR = Brushed Aluminum w/ Red Letter Outline SG = Brushed Aluminum w/ Green Letter Outline Blank = No Frame S = Silver Powder Coat FLPL75-75 Viewing Distance with Photoluminescent Background SERIES # OF FACES BACKGROUND COLOR FRAME COLOR FLPL75 S = Single D = Dual Blank = No Frame S = Silver Powder Coat FLPL Viewing Distance with Photoluminescent Lettering SERIES # OF FACES BACKGROUND COLOR FRAME COLOR FLPL10 S = Single D = Dual Blank = No Frame S = Silver Powder Coat Mounting Brackets for Use with Framed Signs MODEL DESCRIPTION COLOR FLPLMB For FLPL50 and FLPL75 signs S = Silver FLPLMB10 For FLPL10 signs Fulham Co., Inc

24 CONTACT US Visit for product information, sales representative contact info, technical documentation, and more. Fulham Headquarters (USA) S. Van Ness Avenue Hawthorne, CA Tel: Fax: Fulham Client Services Order processing, technical support, product information, requests for quotations Tel: Fax: Fulham Warranty Department Warranty Information Tel: For details on Fulham s warranty coverage, please visit GLOBAL S & CONTACTS Fulham Company B.V. (Europe) Berenkoog BZ Alkmaar Netherlands Tel: +31.(0) sales.eu@fulham.com Fulham Company Ltd. (Hong Kong) Unit 6, 6/F Kowloon Plaza 485 Castle Peak Road Cheung Sha Wan, Kowloon Hong Kong Tel: Fax: hongkongsales@fulham.com Fulham Co., Inc. (Canada) 24 Kicking Horse Way Port Moody, BC, V3H 0G5 Canada Tel: canadasales@fulham.com Fulham Electronic Co. Ltd. (North China) No. 9 Xingchang Road, Nanshao Zhen Changping Science Park, Beijing P.R. China Tel: Fax: northchinasales@fulham.com Fulham Electronic Co. Ltd. (South China) Room 1402, Block D, The First Place Wealth Centre No. 200 Hongfu Road, The South Dongguan City, Guangdong Province P.R. China Tel: Fax: southchinasales@fulham.com Fulham Electronic Co. Ltd. (Central China) Room 302, Xing Yuan Technology Plaza No 418, Gui Ping Road Caohe-Jing Hi-Tech Park Shanghai P.R. China Tel: Fax: centralchinasales@fulham.com Fulham (Latin America) S. Van Ness Avenue Hawthorne, CA U.S.A. Tel: latinamericasales@fulham.com Fulham Company Ltd. (Middle East) LOB-2, No 127 P.O. Box Jebel Ali Free Zone, Dubai United Arab Emirates Tel: Fax: fulhamdubai@fulham.com Fulham (India) Pvt. Ltd. 343, Kaliandas Udyog Bhavan Sadanand Tandel Marg Near Century Bazar Prabhadevi, Mumbai India Tel: gmalkani@fulham.com sghose@fulham.com Fulham (India) Pvt. Ltd. Survey No Village Narhe Taluka Haveli, Pune India Tel: /4 Fax: gmalkani@fulham.com sghose@fulham.com Fulham Co. Inc. P/N: FLYER-EXEM-CAT REV: APR17 All trademarks are the property of their respective owners 24 Fulham Co., Inc