Africa Product Guide

Transcription

1 Africa Product Guide

2 Contents Definitions 4 Diesel Generator Sets 10 Gas Generator Sets 18 Enclosures 24 Rental Power 30 PowerCommand Generator Set Controls 34 PowerCommand Automatic Transfer Switches 40 PowerCommand Digital Systems 44 PowerCommand Remote Monitoring Systems 50 PowerCommand InPower - Service & Maintenance

3 Definitions Emergency Standby Power (ESP): Applicable for supplying power to varying electrical load for the duration of power interruption of a reliable utility source. Emergency Standby Power (ESP) is in accordance with ISO Fuel stop power in accordance with ISO 3046, AS 2789, DIN 6271 and BS Prime Power (PRP): Applicable for supplying power to varying electrical load for unlimited hours. Prime Power (PRP) is in accordance with ISO Ten percent overload capability is available in accordance with ISO 3046, AS 2789, DIN 6271 and BS Limited-Time Running Power (LTP): Applicable for supplying power to a constant electrical load for limited hours. Limited Time Running Power (LTP) is in accordance with ISO Base Load (Continuous) Power (COP): Applicable for supplying power continuously to a constant electrical load for unlimited hours. Continuous Power (COP) is in accordance with ISO 8528, ISO 3046, AS 2789, DIN 6271 and BS Data Center Continuous (DCC): Applicable for supplying power continuously to a constant or varying electrical load for unlimited hours in a data center application. 4 5

4 Global strength, local partnership

5 Low Emission Technologies We are committed to meeting or exceeding clean air standards worldwide. 8 Diesel Generator Sets Integrated design and manufacturing combine to give you unequalled reliability, power quality, rated performance and efficient operation, 9

6 Diesel Generator Sets 50 Hz 10 11

7 Diesel Diesel Prime Power Mission Critical The Ambatovy Project Madagascar super-mine project calls in Cummins The largest capital project in the history of Madagascar, the Ambatovy project, has purchased 30 Cummins Power Generation generator sets to help meet its requirement for prime power. The combined mine and processing project has the potential to be a huge boost to the country s economy. When it began to face problems with its prime power provision, it was vital to find a solution. Cummins South Africa, Power Generation was chosen for the work and has provided 30 Cummins Power Generation C1250 D2R generator sets using KTA50-G3 engines and STAMFORD P7 alternators. The total order, valued at US$15 million, was installed at the site and began providing the much needed extra power by late November The customer initially considered renting the required equipment, but saw the value in purchasing the KTA50-G3 powered, rental-spec generator sets thanks to their durability and reputation for operating in harsh conditions. Cummins support, service and its commitment to delivering and setting up in a short time frame were also key factors in the decision. More than 200 public hearings were held to examine the project s social and environmental issues, which led to the adoption of environmental conservation models based on World Bank guidelines. The project is contributing greatly to the local economy. Around 12,000 workers were hired directly and indirectly during the construction phase. A local development programme provides a human resources registration centre with occupational and technical training programmes for small to medium sized local companies. Netcare St. Augustine s Hospital Durban, South Africa Business Location Netcare St. Augustine s Hospital is KwaZulu-Natal s largest private hospital and the second-largest care center in the Netcare Group. Operational Need The risk of mains power failure represented a major hazard for St. Augustine s, the 418-bed hospital, particularly for dangers posed to patients in operating theatres and high-care units. The hospital had previously been reliant upon small generators for essential services only. When hospital administrators sought comprehensive emergency power protection for the entire establishment, they turned to the experts at Cummins Power Generation. Primary Choice Factors Cummins recommended two new diesel-powered generator sets capable of synchronizing and producing the full power load within 15 seconds after a mains power failure. In the unlikely event of generator set failure, the system is designed to provide uninterrupted power on predetermined essential power loads (such as operating rooms or intensive care units) with its remaining generator set. The complete operation is controlled by Cummins MC150 master control that can be programmed to provide pre-determined load share, load shed and sequential load demand protocols. Cummins reputation for an excellent national support network and superior technical services was a primary driver in the hospital s selection of the new emergency standby power system. Result Two C1400 D5 generator sets provide a reliable source of standby power that keeps the hospital fully operational in the event of a blackout. An MC150 master control manages the operation of the entire system and is programmed to provide pre-determined load share/shed and sequential load demand protocols

8 Diesel Notes: Commercial & Industrial EthioTelecom / Huawei Ethiopia Business Location Ethio Telecom (ET) is the only telecom operator in Ethiopia, whose primary objective is to improve the coverage and quality of their network across the country. Operational Need Ethiopia is the second most populous country in Africa with a closed economy and letter of credits heavily controlled by the government. With only one state run telecom operator, poor network coverage and the government s priority to improve the cellular network to aid in economic growth, ET launched their telecom expansion program to introduce new base transceiver station technology, improve coverage and increase network uptime. All the towers needed to be backed up by generators to ensure increased network uptime when the grid fails. Primary Choice Factors Quality, reputation and strong support in country. ET also wanted to retain their old proven technology of using air cooled generators. However, Cummins was successful in lobbying ET against air cooled generators and to adopt water cooled generators. Result Cummins competed against all major international generator competitors and was successfully chosen to supply water cooled generators for a period of two years. Thus far we have supplied ~800 generators to ET via Huawei, the biggest Telecom Equipment provider in the world

9 Diesel Diesel 50 Hz RANGE Name Standby Rating Prime Rating kva kwe kva kwe Engine Emissions Compliance Standard Alternator Standard Control Sound Enclosure C17D X2.5-G2 - PI044G PS0500 C22D X2.5-G2 - PI144D PS0500 C28D X2.5-G2 - PI144F PS0500 C33D X3.3-G1 - PI144G PC 1.1 C38D X3.3-G1 - PI144H PC 1.1 C44D S3.8-G4 - UCI224C PS0500 C55D S3.8-G6 - UCI224D PS0500 C66D S3.8-G7 - UCI224F PS0500 C90D BTA5.9-G5 - UCI224G PC 1.2 C110D BTA5.9-G5 - UCI274C PC 1.2 C150D BTAA5.9-G6 - UCI274E PC 1.2 C170D BTAA5.9-G7 - UCI274F PC 1.2 C175D5e QSB7-G5 EU IIIA UCI274F PC 1.2 C200D5e QSB7-G5 EU IIIA UCI274H PC 1.2 C220D5e QSB7-G5 EU IIIA UCI274H PC 1.2 C250D5e QSL9-G7 EU IIIA UCDI274K PC 1.2 C275D QSL9-G5 TA Luft 4g UCDI274K PC 1.2 C275D5e QSL9-G7 EU IIIA HCI4D PC 1.2 C300D QSL9-G5 TA Luft 4g HCI4D PC 1.2 C300D5e QSL9-G7 EU IIIA HCI4D PC 1.2 C330D QSL9-G5 TA Luft 4g HCI4D PC 1.2 C330D5e QSL9-G7 EU IIIA HCI4D PC Hz RANGE Name Standby Rating Prime Rating kva kwe kva kwe Standard Option - Not Available Engine Emissions Compliance Standard Alternator Standard Control Sound Enclosure C350D NT855-G6 - HCI4E PCC 2100 C400D NTA855-G4 - HCI4F PCC 2100 C400D5e QSX15-G8 EU Stage II HCI4F PC 2.2 C440D NTA855-G7 - HCI5C PCC 2100 C450D5e QSX15-G8 EU Stage II HCI5C PC 2.2 C450D5eB QSZ13-G7 EU Stage IIIA HCI5C PC 2.2 C500D QSZ13-G5 EU Stage II HCI5C PC 2.2 C500D5e QSX15-G8 EU Stage II HCI5C PC 2.2 C550D5e QSX15-G8 EU Stage II HCI5D PC 2.2 C700D VTA28-G5 - HCI5F PC 3.3 ISO20 C825D QSK23-G3 - HCI6G PCC C825D5A VTA28-G6 - HCI6G PC 3.3 ISO20 C900D QSK23-G3 - HCI6H PCC C1000D5B KTA38-G14 - HCI6K PC 3.3 HC40 C1000D QST30-G3 - HCI6J PC 3.3 ISO20 Standard Option - Not Available 16 17

10 Diesel Diesel 50 Hz RANGE 50 Hz RANGE Name Standby Rating Prime Rating DCC Rating Continuous Rating kva kwe kva kwe kva kwe kva kwe Engine Standard Alternator Emissions Compliance Standard Control Sound Enclosure Name Standby Rating Prime Rating kva kwe kva kwe Engine Emissions Compliance Standard Alternator Standard Control Sound Enclosure C1100D QST30- G4 - HCI6K PC C220D CTAA8.3-G7 - UCI274H PC 1.2 C250D CTAA8.3-G9 - UCDI274J PC 1.2 C1100D5B KTA38- G14 - HCI6K PC 3.3 HC40 C1250D5A KTA38-G9 - PI734A PC C1400D KTA50-G3 - PI734B PC C1400D C1675D C1675D5A KTA50- G3 KTA50- G8 KTA50- GS8 - PI734B PC PI734D PC PI734D PC C1675D KTA50-G8 - PI734D PC C1675D5A KTA50-GS8 - PI734D PC C2000D QSK60-G3 - PI734F PCC C2250D QSK60-G4 - PI734G PCC C2500D5A QSK60-G8 - LVSI804R PCC C1760D5e C2000D5e C2000D C2250D C2500D5A C2750D C2750D5e QSK60- GS3 QSK60- GS3 QSK60- G3 QSK60- G4 QSK60- G8 QSK78- G9 QSK78- G15 / QSK78- G16 TA Luft 2g TA Luft 2g PI734D PI734F - PI734F - PI734G TA Luft 4g LVSI804S PCC 3201 PCC 3201 PCC 3201 PCC 3201 PCC 3201 TA Luft 4g LVS1804S PC EPA Tier 2 / 2GTAL LVS1804S PC Name Standby Rating Prime Rating DCC Rating Continuous Rating kva kwe kva kwe kva kwe kva kwe C3500D C3500D5e C3750D C3750D5e Engine Sound Enclosure QSK95- G4 QSK95- G5/ G10 QSK95- G4 QSK95- G10 Standard Alternator - LVSI804W TA Luft 2g / EPA Tier 2 LVSI804W - LVSI804X EPA Tier 2 LVSI804X Emissions Compliance Standard Control PC 3.3 PC 3.3 PC 3.3 PC C3000D QSK78- G9 TA Luft 4g LVS1804S PC Standard Option - Not Available C3000D5e QSK78- G15 / QSK78- G16 EPA Tier 2 / 2GTAL LVS1804S PC Standard Option - Not Available 18 19

11 Gas Generator Sets 50 Hz 20 21

12 Lean-Burn Gas High-performance lean-burn gas fueled generator sets Cummins lean-burn gas fueled generator sets form the heart of our gas-powered solutions. Spanning power ratings of 315 kwe to 2 MWe and capable of running on natural gas and alternative gaseous fuels, the range delivers renowned Cummins reliability, extended maintenance intervals, high fuel efficiency and very low emissions, all from high density and compact power packages. This combination of durability, economy and environmental responsibility makes our leanburn gas fueled generator sets the first choice for prime and standby power, high-hour peaking and cogeneration sites the world over, regardless of scale or location. 50 Hz RANGE Name Continuous Rating (kwe) Standby Rating (kwe) Engine Alternative Fuels Capability C315N5C 315 QSK19G C1160N5C 1160 QSK60G C1400N5C 1400 QSK60G C1540N5CB 1540 QSV91G C1750N5C 1750 QSV91G C2000N5C 2000 QSV91G Fuel flexibility for diverse applications Our range of lean-burn gas fueled generators incorporates models that run on natural gas, giving you the dependability that comes from an uninterruptible fuel supply, and models that also burn alternative gaseous fuels with lower BTU properties and varying Methane Numbers (MN). This fuel flexibility enables them to power a vast range of applications, from remote sites such as oil platforms and mines to greenhouses, data centers, utility projects, wastewater facilities, industrial plants and commercial centers. Single-source build Our lean-burn gas fueled generator sets deliver an added benefit: single-source build by Cummins. We design and manufacture every component, from the engine and alternator to the switchgear and controls. The result is seamless performance and streamlined, knowledgeable Cummins support, every step of the way. We call this build integrity The Power of One. Gas Data Two Cummins lean-burn natural gas generator sets provide standby power for Washington State University in the USA. Reliability and versatility Our lean-burn gas fueled generator set range combines versatility and robustness to match your power demands, whatever the site or application. Our products run on high, medium and low voltages and are also built to operate in the world s toughest environments. It means you can count on them to perform reliably, even in extreme ambient temperatures, at high altitudes or in dust filled environments

13 Enclosures 50 Hz 24 25

14 Enclosures 26 27

15 Enclosures Enclosures 50 Hz - DIESEL RANGE Name Standby kva Dimensions (mm) L x W x H Wet Weight without fuel (kg) Sound 75% load 1m 7m C17D X 987 X C22D X 987 X C28D X 987 X C33D X 967 X C38D X 967 X C44D X 1115 X C55D X 1115 X C66D X 1115 X C90D X 1142 X C110D X 1142 X C150D X 1090 X C170D X 1090 X C175D5e X 1100 X C200D5e X 1100 X C220D5e X 1100 X C250D5e X 1424 X C275D X 1424 X C275D5e X 1424 X C300D X 1424 X C300D5e X 1424 X C330D X 1424 X C330D5e X 1424 X Tank (L) POWERBOX 50 Hz RANGE Name PowerBox Dimensions 1m Sound 75% load 7m Optional Tank (L) C700D5 PB-20S 20 ISO L C825D5A PB-20S 20 ISO TBA TBA 500L C1000D5 PB-20S 20 ISO L C1100D5B PB-20S 20 ISO L, 2000L C1400D5 PB-40S 40 ISO HC L, 2000L C1675D5 PB-40S 40 ISO HC L, 2000L C1675D5A PB-40S 40 ISO HC L, 2000L 50 Hz - DIESEL RANGE Name Standby kva Dimensions (mm) L x W x H Wet Weight without fuel (kg) Sound 75% load 1m 7m Tank (L) C350D X 1563 X C400D X 1563 X C400D5e X 1563 X C440D X 1563 X C450D5e X 1553 X C450D5eB X 1564 X C500D X 1564 X C500D5e X 1553 X C550D5e X 1553 X

16 Rental Power 50 Hz 30 31

17 Notes: Rental 50 Hz & 60 Hz Name 50 Hz Prime Rating 60 Hz Prime Rating kva kwe kva kwe Engine Emissions Compliance Standard Alternator Standard Control C20D5R V2403-M- E3BG EU Stage IIIA PI144D1 PCC 1302 C40D5R BTAA3.3- G11 EU Stage IIIA UC224C PCC 1302 C60D5R BTAA3.3- G11 EU Stage IIIA UC224E PCC 1302 C100D2R QSB5-G5 EU Stage IIIA UC274C PCC 1302 C150D2R QSB7-G5 EU Stage IIIA UC274F PCC 1302/ PCC 3300 C200D2R QSB7-G5 EU Stage IIIA UC274H PCC 1302/ PCC 3300 C250D2R QSL9-G3 EU Stage IIIA UC274K PCC 1302/ PCC 3300 C300D2R QSL9-G7 - Not Available EU Stage IIIA HCI4D PCC Hz & 60 Hz Name 50 Hz Prime Rating 60 Hz Prime Rating kva kwe kva kwe Engine Emissions Compliance Standard Alternator Standard Control C1000D2R KTA38-G14 - HCI634K PCC 3300 C1250D2R KTA50-G3 - P7B PCC Not Available 32 33

18 Power Control PowerCommand Generator Set Controls

19 Controls Controls Main Features PS 0500 PowerCommand Generator Control PC 1.1/1.2 PCC 2100 PC 2.2 PCC 3201 PC 3.3 PC 3.3 MLD Main Features PS 0500 PowerCommand Generator Control PC 1.1/1.2 PCC 2100 PC 2.2 PCC 3201 PC 3.3 PC 3.3 MLD General Measurement & Instrumentation - Alternator AVR - - Electronic Governing - Glow Plug Control Cycle Cranking - Full Authority Engine Control Networking (LonWorks) Networking (ModBus) Fault History Operator Interface Manual Start/Stop Auto/Remote Start Exercise Function - - Auto LED Not in Auto LED Manual LED Common Shutdown LED Common Warning LED Exercise LED Emergency Stop (Local and Remote) Alphanumeric Screen Remote Start Input Active Led Fault Reset Measurement & Instrumentation - Engine Oil Pressure - - Oil Temperature Water Temperature Engine Speed Hours Run Number of Starts Battery Voltage Exhaust Temperature Standard Option - Not Available 3 Phase L-L & L-N Voltage & Frequency 3 Phase Current kwh - - Total kva - - Total kw & kvar PF Per Phase kvar, kw - Per Phase kva Shutdown Protection & Indication - Engine - Low Fuel Level High Fuel Level Low Oil Pressure High Engine Coolant Temperature Failure to Crank Shutdown Over Crank (Failure to Start) - Overspeed Shutdown Protection & Indication - Alternator Under & Over Voltage Under & Over Frequency Overcurrent - Earth Leakage - Reverse Power - - Reverse Var - - Threshold Warning Indications Low Oil Pressure Low Engine Coolant Temperature High Engine Coolant Temperature Low Coolant Level - - Low Battery Voltage High Battery Voltage Battery Alternator Charge Fault Overcurrent - Overload AMM - AmpSentry Maintenance Mode - - Standard Option - Not Available 36 37

20 Controls Notes: Capability Main Features PS 0500 PC 1.1/1.2 PowerCommand Generator Control PCC 2100 PC 2.2 PCC 3201 PC 3.3 PC 3.3 MLD Auto Synchronizing (Isolated Bus) kw & VAr Load Sharing Control Auto Synchronizing (Utility Bus) Base Load Synchroscope Peak Lopping Masterless Load Demand Power Transfer Function Open Transition Transfer Hard Closed Transition Soft Closed Transition (Ramping) Transfer & Base Load (Utility) Gen/Mains Breaker Control Gen/Mains Breaker Status Protection Environment Operating Temp. Range -40 C to +70 C - Operating Temp. User Interface -20 C to +70 C Humidity up to 95% (Non-condensing) Codes & Standards CE Compliant NFPA UL508 Listed - - UL Certified - Controller Inputs/Outputs Digital Inputs (Shutdown, Warning or Status) Relay Outputs Configurable Input/Output - Standard Option - Not Available 38 39

21 Load Transfer PowerCommand Automatic Transfer Switches

22 Automatic Transfer Switches Automatic Transfer Switches Main Features Automatic Transfer Switches GTEC OTEC OTPC BTPC CHPC/ OHPC Specifications Amp Range (Select the ATS to suit the largest-sized supply (amps) that will be applied to the ATS) Voltage Rating up to 480VAC up to 600VAC up to 600VAC up to 600VAC up to 600VAC Phases 1 or 3 1 or 3 1 or 3 1 or 3 1 or 3 Frequency 50 or 60Hz 50 or 60Hz 50 or 60Hz 50 or 60Hz 50 or 60Hz Poles 3, 4 3, 4 3, 4 3, 4 2, 3, 4 Warranty 1 year up to 10 years up to 10 years up to 10 years up to 10 years Switch Mechanism Open Transition Closed Transition - - (>1000A) (CHPC only) Programmed Transition - Bypass Isolation - Open Transition Bypass Isolation - Closed Transition Bypass Isolation - Programmed Transition Utility-to-Genset Utility-to-Utility - - (not available with closed transition) Genset-to-Genset - - Service Entrance Available - ( 1000A) ( 1000A) (not available with closed transition) (<1000A) (OHPC only) - - (disabled Mechanical Interlock during closed transition) Load Monitoring - - WCR with Specified Circuit Breakers 25-65kA 14-85kA kA kA 42-85kA WCR with Current Limiting Fuses kA 200kA 200kA 200kA 200kA Short-time Ratings / 30-cycle Rating (UL Listed) kA Control Type of Control Basic micro Basic micro PCC L1 or L2 PCC L2 PCC L2/ L1 or L2 Automatic Transfer Switches Main Features CHPC/ GTEC OTEC OTPC BTPC OHPC Operator Panel Load Connected to Normal LED Normal Source Available LED Load Connected to Emergency LED Emergency Source Available LED Load AC Metering Bar Graph - - Alphanumeric Display - - Panel Security Lock - - Control Functions 3-phase Voltage Sensing - Utility 3-phase Voltage Sensing - Generator Single Single Phase Phase Electrical Isolation from AC - Mains High High Impedance Impedance Transformer Transformer Transformer O/U Voltage Sensing Utility U/V Only U/V Only O/U Voltage Sensing Generator U/V Only U/V Only Voltage Sensing Accuracy +/- 2% +/- 2% +/- 2% +/- 2% +/- 2% O/U Frequency Sensing Utility - - O/U Frequency Sensing Generator U/F Only U/F Only Voltage Imbalance - - L2 Control L2 Control Phase Rotation - - L2 Control L2 Control Loss of Phase - Transfer Normal to Emergency (Time) secs secs secs secs secs Re-transfer Emergency to Normal (Time) 0-30 mins 0-30 mins 0-30 mins 0-30 mins 0-30 mins Engine Start Delay (Adjustable) 0-10 sec 0-10 sec secs secs secs Time Delay to Engine Stop 0-30 mins 0-30 mins secs secs secs Programmed Transition (Time) 0-10 sec 0-10 sec 0-60 secs 0-60 secs 0-60 secs Fail to Disconnect Timer (Closed Transition) - - Level 2 Cont Time & Date-Stamped Event Log - - Historical Data Display - - Remote Monitoring/Communication - - System Data Display - - Elevator Signal Module Load Sequencing - - Fully-Programmable Exerciser Clock Exercise Clock Real-Time Clock - - Standard Option - Not Available Standard Option - Not Available 42 43

23 PowerCommand Systems and Switchgear 44 45

24 Systems POWER TRANSFER AND PARALLELING EQUIPMENT Main Features Gento-Gen 46 Standard Option - Not Available 47 DMC1000 DMC1500 DMC200 DMC300 DMC8000 Utility Gento-Gen Utility Gento-Gen Utility Gento-Gen Utility Custom Features Custom Engineering Available Power Section Integrated Low Voltage Switchgear Integrated Medium Voltage Switchgear Outdoor Switchgear Enclosure Protection Relay Switchgear Station Battery System Neutral Grounding Resistor Load Bank Genset Controller Compatibility PowerCommand 3100 PowerCommand 3200 PowerCommand 3201 PowerCommand 3.3 Genset Parallel up to 4 Gensets Parallel up to 8 Gensets - - Parallel more than 8 Gensets Load Demand Fixed Sequence Run Hour Sequence (PC 3.3 required in all gensets) (PC 3.3 required in all gensets) (PC 3.3 required in all gensets) (PC 3.3 required in all gensets) Multiple Gen Busses Load Add/Shed Priority Based - 6 Levels/6 Loads Priority Based - 8 Levels/8 Loads Priority Based - 10 Levels/10 Loads Priority Based - 16 Levels/32 Loads Capacity Based - Single Bus Priority Based - Multiple Bus Manual Load Add/Shed Control

25 Systems Systems Main Features Gento-Gen DMC1000 DMC1500 DMC200 DMC300 DMC8000 Utility Gento-Gen Utility Gento-Gen Utility Gento-Gen Utility System Test Without Load With Load System Scheduler (Exercise) Test Extended Parallel Extended Utility kw Control Genset Bus % Level (Open Loop/Base Load) Genset kw (Open Loop/ Base Load) Genset Bus kw (Closed Loop) Genset Bus kw with Utility Constraint Utiity Bus kw (Closed Loop/Peak Shave) Extended Utility kvar Control Gen Bus % Level (Open Loop) Genset Bus Power Factor (Open Loop) Genset Bus kvar (Closed Loop) Genset Bus Power Factor (Closed Loop) Utility Bus kvar (Closed Loop) Utility Bus Power Factor (Closed Loop) Extended Control Remote Start/Stop Facility Load Start/Stop Power Transfer Transitions Open Transition - - Hard Closed Transition <100 ms - (Transfer pair topology only) - (Transfer pair topology only) - - Hard Closed Transition Non-ramping Soft Closed Transition NE Function Neutral Earth Device Control - - Standard Option - Not Available Main Features Gento-Gen Data Communications, Display and Alarming DMC1000 DMC1500 DMC200 DMC300 DMC8000 Utility Gento-Gen Utility Gento-Gen Utility Gento-Gen Utility Web Serving HMI Screens Genset Summary Data at the DMC - - Real Time Trending - - Historical Trending - - Modbus RTU RS485 BMS Interface Modbus RTU RS Modbus TCP/IP Over Ethernet BMS Interface - - Remote Monitoring with Alarm Paging and Supervisory Monitoring Station for On-site/Off-site Power Systems System Annunciator(s) Audible Alarm Diagnostics Operator Interface HMI 211 Operator Interface Color Touch Screen Color Touch Screen Color Touch Screen Customized System HMI Multiple HMI - - Redundancy Hot Standby Redundant CPU and Cabling Redundant I/O Reports Alarm History - - Plant Test Report (JCAHO) - - Custom Report Certification / Compliance CE Mark UL891 CSA Seismic Zone 4 OSHPD Certified Standard Option - Not Available Note: DMC are configurable for use in many Power System Atchitectures, including several utilities and multiple generator sets

26 Monitoring PowerCommand Remote Monitoring Systems

27 Remote Monitoring Systems Notes: Features/ Functionality PowerCommand 500 PowerCommand 550 Number of Devices Supported Supported Device Types Device I/Os Expandable I/O Modules Notifications Connection to Supported Devices Data Logging Up to 2 devices (any combination) Generator sets, transfer switches, CCM-T, CCM-G, Aux 101/102 2 discrete inputs, 2 discrete outputs, 1 resistive input AUX101: 8-configurable inputs / 8-discrete outputs AUX102: 4-non configurable discrete inputs / 8-discrete outputs SMTP/ , SMS/Text and SNMP traps Modbus Yes No data or report export Up to 12 devices (any combination) Generator sets, transfer switches, CCM-T, CCM-G, Aux 101/102 2 discrete inputs, 2 discrete outputs, 1 resistive input AUX101: 8-configurable inputs / 8-discrete outputs AUX102: 4-non configurable discrete inputs / 8-discrete outputs SMTP/ , SMS/Text and SNMP/Traps Modbus Yes Data and report export Extended Memory Yes Yes Certification/ Compliance Languages Power Supply Connection UL, CSA, CE, FCC, RoHS English, Brazilian Portuguese, Chinese, French and Spanish UL, CSA, CE, FCC, RoHS English, Brazilian Portuguese, Chinese, French and Spanish 8-32 DC 8-32 DC Warranty Period 12 months 12 months 52 53

28 PowerCommand InPower Service and Maintenance 54 55

29 InPower Networking & Software InPower Main Functions Pro Lite Direct connection capability from a personal computer to PowerCommand generator set controls, transfer controls and system controls Connects to generator set or transfer switch controls via modem or to multiple controls Allows the monitored equipment to send alarm information to a connected computer Configurable for units of measurement, and level of user access (read only, read/change values, administrator) Adjustment of nearly every adjustment parameter within the connected control system, including parameters such as voltage and frequency levels, gains, protection set-points and other values Convenient programming of configurable inputs in the controllers Viewing of equipment history, fault codes, and data associated with fault codes Generates reports of monitored data Allows released firmware upgrades on PowerCommand generator set controls Plots critical parameters in a strip chart format, and export data to 3rd party software tools for manipulation and viewing Simulates fault conditions in generator set controls in compliance with NFPA 110 requirements to demostrate functionality of the controller and monitoring equipment in a facility Simulate fault conditions in genset controls in compliance to NFPA 110 requirements to demostrate functionality of the controller and monitoring equipment in a facility. Available - Not Available 56 57

30 Notes: Notes: 58 59

31 Cummins Africa Head Quarters - Johannesburg, ZA Cummins Afrique de l Ouest, Senegal Head Office Cummins Angola Head Office Cummins Cote D Ivoire Head Office Cummins Ghana Head Office Cummins Southern Africa, Johannesburg, ZA Head Office Cummins North Africa, Morocco Head Office Cummins West Africa, Nigeria Head Office See your distributor for more information or visit power.cummins.com. Global Brochure 01/ Cummins Power Generation Inc. All rights reserved. Cummins Power Generation and Cummins are registered trademarks of Cummins Inc. PowerCommand is a registered trademark of Cummins Power Generation. All information contained within this document was correct at time of