8800 MONOLEC ULTRA. LE Products 9001: Bailey Avenue Fort Worth, TX Fax:

Transcription

1

2

3 8800 MONOLEC ULTRA Engine Oil LE Products manufactured under an ISO 9001:2000 Certified Quality System Long-drain SAE 15W-40 engine oil designed for yearround extended drain service in diesel and gasoline engines for fleet and industrial use. LE s 8800 MONOLEC ULTRA Engine Oil provides the most desired features and benefits for heavy-duty service in diesel and gasoline engines. Through a unique formulation available only from Lubrication Engineers, Inc., 8800 MONOLEC ULTRA Engine Oil offers exceptional service. The dependable 15W-40 viscosity range is made possible by a shear-stable viscosity modifier developed and proven by LE through years of research and actual field experience. It is especially formulated for 2007 lowemission engines and is backwards compatible for use in older diesel engines as well. LE s 8800 MONOLEC ULTRA Engine Oil contains MONOLEC, LE s exclusive wear reducing additive and select 100% paraffinic base oils. No other brand of petroleum lubricating oil, regardless of price, will be found superior in condition to LE s MONOLEC ULTRA Engine Oil at the end of any given period of use. WHAT IS MONOLEC? MONOLEC is LE s exclusive wear-reducing additive which has proven its extraordinary performance in thousands of applications. It is an invaluable component in LE s engine oils, industrial oils and other lubricants bearing the MONOLEC trademark. MONOLEC creates a singular molecular lubricating film on the metal surface, vastly increasing film strength without affecting tolerances. MONOLEC allows opposing surfaces to slide by one another, greatly reducing friction heat and wear. Contains shear resistant viscosity index improvers that provide good viscosity properties at both high and low temperatures. Low SAPS (sulfated ash, phosphorous and sulfur) formula that minimizes poisoning of SCR (selective catalytic reduction) and particulate filtration traps to reduce emissions. Safe extended drain intervals of up to 100,000 miles in diesel engines and up to 25,000 miles in gasoline engines with specified filter changes and periodic scheduled oil analysis. All-season, all-weather performance affords minimal drag during startup at low temperatures, while effectively lubricating at high temperatures. Superior anti-wear protection through two anti-wear agents which work together to reduce wear to an absolute minimum. Reduced oil consumption MONOLEC ULTRA Engine oil has continuously cut oil consumption up to 60% in field tests and even more in actual usage. Individual results vary with engine and operating conditions. Improved fuel mileage was proven in tests to increase fuel efficiency up to 2.5%, with greater increases being realized by many users. Long service life comes from oxidation inhibitors combined with select 100% paraffinic base oil which prevents excessive thickening or deposit formation. Heavy-duty detergents and dispersants keep engine parts clean and keep contaminants in suspension until removal by draining the oil. Nonfoaming in service to provide smooth engine performance. Improved fleet reliability and uptime. No fleet can afford unscheduled downtime. LE s 8800 MONOLEC ULTRA Engine Oil is the only choice for dependable service in all conditions. 300 Bailey Avenue Fort Worth, TX Fax:

4 8800 MONOLEC ULTRA Engine Oil Technical Data PHYSICAL CHARACTERISTICS TYPICAL: SAE Grade 15W-40 Gravity, ºAPI 29.5 Viscosity, 100ºF ºF ºC ºC ºC, ASTM D , ºC, ASTM D ,100 HTHS 150ºC, cp, ASTM D Viscosity Index 130 Color Red Flash Point, ºF (ºC), min. 430 (221) Pour Point, ºF (ºC) max. -24 (-31) Total Base Number (TBN), 10.0 Sulfated Ash, Mass% 1.0 Elemental Sulfur, % <0.40 Elemental Phosphorous, % <0.12 SPECIFICATIONS EXCEEDED: API CJ-4, CI-4, CI-4 Plus/SM, SL Mack EO-O Premium Plus 07, EO-N ACEA E7-04, E4, E2 Demonstration Premium Plus 03, EO-M Plus, EO-M JASO DH-2 Demonstration Volvo VDS-4, VDS-3, VDS-2 Global DHD-1 Cummins CES 20081, CES 20077, CES20076 Allison C-4 Transmission Detroit Diesel 93K218, 93K215, 93K214 MB P228.3 Caterpillar ECF-3, ECF-1 Renault RLD-3 MTU Type I & II MAN 3275 RECOMMENDATION: Not for use with silver alloy bearings such as EMD engines (Electro-Motive Division of GM). When used in Cummins engines requiring an oil that meets the CES spec, do so in coordination with a used oil monitoring program. 300 Bailey Avenue Fort Worth, TX Fax: LI

5 LUBRICATION ENGINEERS, INC. P.O. Box 7128 FORT WORTH, TX MATERIAL SAFETY DATA SHEET SECTION I - PRODUCT IDENTIFICATION SUPPLIER: EMERGENCY TELEPHONE NUMBERS.: Lubrication Engineers, Inc. Company: (817) P.O. Box 7128 In the event of an emergency spill, fire, or exposure Call: Fort Worth, TX Chemtrec: (Within USA) (800) (Outside USA call collect) (703) CHEMICAL NAME AND SYNONYMS: TRADE NAME AND SYNONYMS: Not applicable 8800 MONOLEC Ultra Engine Oil CHEMICAL FAMILY: Hydrocarbon FORMULA: Not applicable SECTION II - TYPICAL CHEMICAL AND PHYSICAL PROPERTIES APPEARANCE: 210 F, 100 C, cst Red lubricant ODOR: 100 F, 40 C, cst Lube oil odor RELATIVE DENSITY: SOLUBILITY IN WATER: PH: 6-8 (Air=1) >1 Negligible MELTING POINT: F POUR POINT: F Not applicable -27 BOILING POINT: F FLASH POINT: F (Method) > (C.O.C.) VAPOR PRESSURE: SPECIFIC GRAVITY: (H 2 O=1) (mm 60 F) < SECTION III - INGREDIENTS WT PCT TLV ORAL DERMAL (APPROX) LD50 LD50 HAZARDOUS INGREDIENTS: Oil Mist (mineral) < mg/m 3 -TWA Unknown Unknown Zinc Compounds <1.7 Unknown Unknown Unknown NON-HAZARDOUS INGREDIENTS: ADDITIVES AND/OR OTHER INGREDIENTS: This product is a mixture. The specific chemical identity of hazardous ingredients and non-hazardous ingredients, their C.A.S. numbers and their exact percent of composition are proprietary to Lubrication Engineers, Inc. and are being withheld as Trade Secrets. The above listing of hazardous ingredients discloses the properties, approximate concentration and known toxicological effects of the hazardous ingredients. This material is an automotive/industrial lubricant with a low order of toxicity and irritancy. The product is formulated with ingredients that are not designated as harmful to the ozone. REGULATORY INFORMATION: SARA Title III: This product does not contain any chemical substance on the SARA Extremely Hazardous Substances list. If this product contains any chemicals that are subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372, they will be listed in the above HAZARDOUS INGREDIENTS section. TSCA: This material is in compliance with the Toxic Substances Control Act (15 USC ) and all components of this product appear on the Toxic Substance Control Act (TSCA) inventory list. Clean Air Act: No ozone depleting chemicals listed in Title VI, Stratospheric Ozone Protection, Section 602 of the Clean Air Act are present or used in the manufacturing process of this product. SECTION IV - FIRE AND EXPLOSION HAZARD DATA FLASH POINT: F (Method) FLAMMABLE LIMITS: LEL UEL 415 F (C.O.C.) Unknown EXTINGUISHING MEDIA: Foam, dry chemical, water fog, or carbon dioxide SPECIAL FIRE FIGHTING PROCEDURES: Do not direct a solid stream of water into fire. Treat as a petroleum oil fire. Respiratory protection required for fire fighting personnel. UNUSUAL FIRE AND EXPLOSION HAZARDS: None SECTION V - HEALTH HAZARD DATA THRESHOLD LIMIT VALUE: (If Established) Not established. Oil mist = 5mg/m 3 EFFECTS OF OVEREXPOSURE: Although there are no consistent primary routes of entry, the product may cause mild dermatitis upon prolonged contact and is expected to be an eye and lung irritant. Any existing skin, eye, or lung irritation may be aggravated by direct contact. No components are listed on OSHA, I.A.R.C., or N.T.P. lists for carcinogens. SECTION VI - EMERGENCY AND FIRST AID PROCEDURES EYE CONTACT: Flush immediately with water until irritation subsides. SKIN CONTACT: Wash affected skin area with mild soap and water. INGESTION: Do not induce vomiting. Contact a physician. INHALATION: Remove to fresh air. If not breathing, give artificial respiration. Contact a physician. SECTION VII - REACTIVITY DATA STABILITY: (Thermal, Light, Etc.) CONDITIONS TO AVOID: 8800 MONOLEC Ultra Engine Oil Effective Date: January 20, 2005 Print Date: January 27, 2005 Page 1

6 Stable Contact with nuclear radiation and strong oxidizing materials. INCOMPATIBILITY: (Materials to avoid) Strong oxidizing materials. HAZARDOUS DECOMPOSITION PRODUCTS: Dense smoke; oxides of C, S, Mg, N, P, Zn, B and Ca; hydrogen sulfide. HAZARDOUS POLYMERIZATION: Will not occur. SECTION VIII - SPILL OR LEAK PROCEDURES STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Remove all sources of ignition. Treat as a petroleum oil spill. WASTE DISPOSAL METHOD: Incinerate where permitted under federal, state, and local laws. Used petroleum products may be recycled through re-refining processes. SECTION IX - SPECIAL PROTECTION INFORMATION EYE PROTECTION: Sufficient to avoid direct contact. SKIN PROTECTION: Protective neoprene or plastic gloves may be desired. RESPIRATORY PROTECTION: Usually not needed in open, unconfined areas. VENTILATION: Usually not needed in open, unconfined areas. OTHER: Usually not needed. SECTION X - SPECIAL PRECAUTIONS Close containers when not in use. Keep away from heat, sparks, open flames, and strong oxidants. Avoid eye contact and prolonged skin contact. Avoid breathing oil mists. Wash thoroughly after handling. SECTION XI - HAZARD RATINGS There are several recognized and accepted systems that assign hazard ratings to materials. Although this product has not been evaluated specifically against these systems, the ratings for the National Fire Protection Association (NFPA) and the National Paint and Coatings Association's Hazardous Material Identification System (HMIS) are: NFPA HMIS Health 2 1 Flammability 1 1 Reactivity MONOLEC Ultra Engine Oil Effective Date: January 20, 2005 Print Date: January 27, 2005 Page 2