Abdolreza Toudehdehghan, J. Mathews. Presenter: NURUL AIN BINTI JOHARI MODELING AND VERIFICATION OF TRACTOR RIDE MODEL
|
|
- Candace Rogers
- 5 years ago
- Views:
Transcription
1 SESSION 1A VENUE: ROOM 1 DATE: 25/07/2018 TIME: AM CHAIRPERSON: ASSOC. PROF. DR. MOHD. SHAHRIR MOHD SANI (UMP) 1 P USING SINGLE-AXIS MULTIPOINT CONNECTION APPROACH FOR COUPLING TEST AND FINITE ELEMENT MODEL IN THE FREQUENCY BASED SUBSTRUCTURING METHOD W I I Wan Iskandar Mirza, M N Abdul Rani, D P Starbuck, M A Yunus, R Omar 2 P Presenter: WAN IMAAN IZHAN BIN WAN ISKANDAR MIRZA EXPERIMENTAL AND SIMULATION STUDY OF MILD STEEL RESPONSE TO LATERAL QUASI-STATIC COMPRESSION Omar Abdulhasan Lafta, Minah Mohammed Fareed and Md Radzai Bin Said 3 P Presenter: OMAR HASAN THE EFFECT OF LASER STITCH WELDING RESUAL STRESS ON THE DYNAMIC BEHAVIOUR OF THIN STEEL STRUCTURE M.A.S. Aziz Shah, M.A. Yunus, M.N. Abdul Rani, A.M. Saman, M.S. Mohd Sani, M.S. Mohd Zin 4 P Presenter: M.A.S. Aziz Shah FINITE ELEMENT ANALYSIS OF NON-UNIFORM CROSS-SECTION FUNCTIONALLY GRADED COMPOSITE BEAM SUBJECTED TO THERMO- MECHANICAL LOADING Abdolreza Toudehdehghan, J. Mathews 5 P Presenter: ABDOLREZA TOUDEHDEHGHAN STAINLESS STEEL 316L-HYDROXYAPATITE COMPOSITE VIA METAL INJECTION MOULDING: MECHANICAL AND PHYSICAL PROPERTIES W.S.W.Harun, N.A.Johari 6 P Presenter: NURUL AIN BINTI JOHARI MODELING AND VERIFICATION OF TRACTOR RE MODEL M. Hafiz Harun, P. M. Samin, S. A. A. Bakar, K. Hudha Presenter: IR. MOHAMAD HAFIZ BIN HARUN
2 SESSION 1B VENUE: ROOM 2 DATE: 25/07/2018 TIME: AM CHAIRPERSON: ASSOC. PROF DR SYARIFAH NUR AQA SYED AHMAD (UMP) 1 P SYNTHESIS AND CHARACTERIZATION OF LIME DERIVED SOL BASE CATALYST FOR TRANSESTERIFICATION REACTION Fei-ling, Pua, Nur Afiqah Fauzan, Mohd Aizat Mohd Nasir, Rohaya Othman,Sharifah Nabihah Syed Jaafar, Koguleshun Subramaniam 2 P Presenter: DR. PUA FEI GRACE PUA REVIEW OF BENDING STRESS ON GFRC HONEYCOMB PANEL SANDWICH STRUCTURE FOR A CHASSIS LIGHTWEIGHT VEHICLE E.S. Arbintarso, H.F., Datama, R.N.W. Aviyanto, B. Prasetya, U.S.A.B. Purwokusumo, B. Aditiawan, P. Prenggo and R.B.S. Aji 3 P Presenter: ELLYAWAN S ARBINTARSO INFLUENCE OF SHOT PEENING ON STRESS CORROSION CRACKING IN ALUMINUM ALLOY (1100 H12) Hassan A.Abdulhadi, Basim H. Abbas, Shatha M. Rajaa, Khairallah S.Jabur 4 P Presenter: HASSAN SHAMARY INFLUENCE OF GEOMETRY ON TENSILE PROPERTIES OF WOVEN BURI PALM COMPOSITE A. S. F. Woon, J.P. Siregar, C. Tezara 5 P P Presenter: AUDREY SU FERN WOON 3D PRINTING: OVERVIEW OF PLA PROGRESS S.R. Subramaniam, S.K. Selvamani, W.K. Ngui, M. Samykano, K. Kadirgama, K. Sudhakar Presenter: DR NGUI WAI KENG OIL PALM EFB SUPPORTED SOL AC CATALYST FOR ESTERIFICATION REACTION: OPTIMIZATION AND PARAMETRIC EFFECTS STUDY Shamala Gowri, K., Fei-ling.Pua, Kumaran, P., Sharifah Nabihah Syed Jaafar Presenter: DR. PUA FEI GRACE PUA
3 SESSION 1C VENUE: ROOM 3 DATE: 25/07/2018 TIME: AM CHAIRPERSON: ASSOC. PROF. DR. ABDUL ADAM ABDULLAH (UMP) 1 P FLOW ANALYSIS OF INTAKE PORT GEOMETRY OF SPARK IGNITION ENGINE USING SIMULATION Mohammad Abdullah Mohamad Johar, Mohd Farid Muhamad Said, Mohd Azman Abas, Zulkarnain Abdul Latiff, Mohd Rozi Mohd Perang 2 P Presenter: MOHAMMAD ABDULLAH MOHAMAD JOHAR SPRAY TIP PENETRATION OF INVERSED-DELTA INJECTION RATE SHAPING IN NON-VAPORIZING CONDITION M. Fareez, Y. Toyama, S. Saruwatari, S. Akiyama, T. Shimada, T. Aizawa 3 P Presenter: MOHD FAREEZ EDZUAN BIN ABDULLAH ACOUSTIC STUDY OF AN AIR INTAKE SYSTEM OF SI ENGINE USING 1- DIMENSIONAL APPROACH Afiq Aiman Dahlan, Mohd Farid Muhamad Said, Muhammad Hariz Khairuddin, Khairuldean Abd Kadir and Mohd Anuar Mohd Yusoff 4 P Presenter: AFIQ AIMAN DAHLAN THE EFFECTS OF HOT EXHAUST GAS RECIRCULATION (EGR) ON THE EMISSION AND PERFORMANCE OF A SINGLE-CYLINDER DIESEL ENGINE Muntasser A.A Mossa, Abdul Aziz Hairuddin, Nuraini A. A., J. Zulkiple, Hasyuzariza M. Tobib 5 P Presenter: ENG MUNTASSER AL ANBAGI PERFORMANCE AND EXHAUST GAS EMISSION OF BIODIESEL FUEL WITH ADDITIVE IN DIRECT INJECTION COMPRESSION IGNITION ENGINE C B How, N M Taib and M R A Mansor 6 P Presenter: NORHAYAH MAT TAIB COMPUTATIONAL FLU DYNAMIC (CFD) ANALYSIS FOR A-100kW LOW PRESSURE TURBINE TO RECOVER GAS TURBINE EXHAUST ENERGY A A Ahmad Zahidin, A M I Mamat, A Romagnoli Presenter: ASSOC. PROF. DR. AMAN MOHD IHSAN BIN MAMAT
4 SESSION 2A VENUE: ROOM 1 DATE: 25/07/2018 TIME: PM CHAIRPERSON: DR. MUHAMAD NORHISHAM ABD. RANI (UITM) 1 P STUDY OF FREE VIBRATION ANALYSIS ON FIBER METAL COMPOSITE LAMINATES M.N.M.Merzuki, M.R.M.Rejab, M.S.M.Sani, D. Bachtiar, J.Siregar, Bo Zhang, Hazizie Hazuan Presenter: MOHAMAD NAZIRUL MUBIN BIN MERZUKI 2 P ADJUSTABLE VALVE SEMI ACTIVE SUSPENSION SYSTEM FOR PASSENGER CAR M.R. Ahmed, F.R.M. Romlay, A.R. Yusoff Presenter: Mohd Ragab 3 P DESIGN AND ANALYSIS OF LIGHTWEIGHT POLYETHERETHERKETONE (PEEK) FRONT LOWER CONTROL ARM F.T.Pawi, Rosdi Daud, H. Mas Ayu, Tedi Kurniawan, S.H. Tomadi, M.S. Salwani, A.Shah Presenter: ROSDI DAUD 4 P MODELLING AND ANALYSIS OF COMPOSITE B-PILLAR M I Ibrahim, M R M Rejab, H Hazuan and M F Rani Presenter: MOHD IRMAN IBRAHIM 5 P DYNAMIC ANALYSIS OF LOW FREQUENCY FBG ACCELEROMETER: AN INITIAL STUDY N. S. Khalih, M. F. B. Hassan, H. M. Hafizi Presenter: Norsyukriah Khalid
5 SESSION 2B VENUE: ROOM 2 DATE: 25/07/2018 TIME: PM CHAIRPERSON: IR. DR. MOHD. AZMI BIN YUNUS (UITM) 1 P EXPERIMENTAL AND OPTIMIZATION STUDY ON THE OPERATING CONDITIONS OF HEAT PIPES IN EV BTMS USING RESPONSE SURFACE METHOD Faiza M. Nasir, Mohd Z. Abdullah, Mohd A. Ismail Presenter: FAIZA BINTI MOHAMED NASIR 2 P D PRINTING: OVERVIEW OF ABS EVOLVEMENT S.K. Selvamani, S.R. Subramaniam, W.K. Ngui, M. Samykano, K. Kadirgama, K. Sudhakar Presenter: DR NGUI WAI KENG 3 P THE RELATIONSHIP OF VIBRATIONAL ENERGY DISTRIBUTION ON THE LEVEL OF DRIVER DETECTION Sabariah Mohd Yusoff, Joseph Giacomin Presenter: DR. SABARIAH MOHD YUSOFF 4 P AN INNOVATIVE AUTONOMOUS WHEELCHAIR CONVERSION KIT S. Yaakub, M. H. Alsibai Presenter: SALMA YAAKUB 5 P MAGNETIC NANOWIRES (Ni) VIA CHEMICAL REDUCTION METHOD U. Santip, W.K. Ngui, M. Samykano, K. Sudhakar, K. Kadirgama, A.G.N. Sofiah Presenter: DR. MAHENDRAN A/L SAMYKANO
6 SESSION 2C VENUE: ROOM 3 DATE: 25/07/2018 TIME: PM CHAIRPERSON: ASSOC. PROF. DR. AMAN MOHD IHSAN MAMAT (UITM) 1 P INFLUENCE OF FUEL BOOSTER ON THE PERFORMANCE AND EMISSIONS OF DIESEL ENGINE A. M. Norkhizan, R. Mamat, A. Hamidi, A. F. Yusop Presenter: MUHAMAD NORKHIZAN ABDULLAH 2 P PERFORMANCE AND EMISSION OF COMPRESSION IGNITION (CI) ENGINE USING ETHANOL-DIESEL BLENDING AS A FUEL Shazlien Aini Kaulani, Zulkarnain Abdul Latiff, Mohd Rozi Mohd Perang, Mohd Faizal Hasan Presenter: DR. ZULKARNAIN ABDUL LATIFF 3 P AN EXPERIMENTAL INVESTIGATION ON THE COMBUSTION BEHAVIOR OF AN HCCI-DI ENGINE Hasyuzariza M. Tobiba, A. Aziz Hairuddina, Nuraini Abdul Aziza, M.M. Noorb, J. Zulkiplea, Muntasser A.A Mossaa Presenter: HASYUZARIZA BINTI MUHAMAD TOBIB 4 P A COMPARATIVE ANALYSIS ON EMISSIONS OF SOME NEXT GENERATION LONG-CHAIN ALCOHOL/DIESEL BLENDS IN A DIRECT- INJECTION DIESEL ENGINE. H Zurina, A Adam, G M Anes, Zuhaira Abdullah, M Fahmi, M Kamal, F Y Hagos Presenter: H Zurina 5 P SIMULATION OF PERFORMANCE AND COMBUSTION OF SINGLE CYLINDER HCCI ENGINE Ibham Veza, Mohd Farid Muhammad Said, Zulkarnain Abdul Latiff Presenter: IBHAM VEZA
7 SESSION 3A VENUE: ROOM 1 DATE: 26/07/2018 TIME: AM CHAIRPERSON: DR SAIFUL ANWAR BIN CHE GHANI (UMP) 1 P DIFFERENT FLEXIBILITY FORMULAE FOR FE MODELLING AND ANALYSIS OF THE DYNAMIC BEHAVIOUR OF A STRUCTURE WITH BOLTED JOINTS R. Omar, M. N. Abdul Rani, M. A. Yunus, W. I. I. Wan Iskandar Mirza and M. S. Mohd Zin 2 P Presenter: Rohaizat Omar AN OPTIMAL CONTROL STRATEGY FOR HYDRAULIC HYBR VEHICLES TORQUE DISTRIBUTION BASED ON MULTI-OBJECTIVE GENETIC ALGORITHMS APPROACH. Hawary, Ahmad Faizul and Ramdan, Muhammad Iftishah 3 P Presenter: DR. MUHAMMAD IFTISHAH RAMDAN DESIGN AND ANALYTICAL STUDY OF TUBULAR LINEAR ELECTROMAGNETIC PULSING MOTOR AS ALTERNATIVE FOR ELECTRIC VEHICLE NM.Noor, I.Aris, S.Arof, Parveziqbal, A.K.M M.Norhisam 4 P Presenter: NORRAMLEE MOHAMED NOOR A COMPARATIVE STUDY OF THE VIBRATIONAL EFFECTS ON THE BOUNDARY CONDITIONS OF A SLENDER BEAM A R Bahari, M A Yunus, M N Abdul Rani, W I I Wan Iskandar Mirza and Haizuan A R 5 P Presenter: ABDUL RAHIM BAHARI A PILOT STUDY EVALUATING THE EFFICIENCY OF ELECTRIC BUS SHUTTLE SERVICES IN UTM CAMPUS M A Abas, M I Ardani, M Mohamad, C H Ling, S N Abdul Latif, S M F Syed Mohamad and A M Halim 6 P Presenter: MOHD IBTHISHAM ARDANI PERODUA MYVI PARALLEL HYBR HYDRAULIC PASSENGER VEHICLE FUEL ECONOMY SIMULATION ON MALAYSIAN DRIVE CYCLE, USING RULE- BASED CONTROL STRATEGY. Ramdan, Muhammad Iftishah and Hawary, Ahmad Faizul Presenter: DR. MUHAMMAD IFTISHAH RAMDAN
8 SESSION 3B VENUE: ROOM 2 DATE: 26/07/2018 TIME: AM CHAIRPERSON: ASSOC. PROF. DR WAN AZMI WAN HAMZAH (UMP) 1 P DEVELOPMENT OF EVAPORATIVE INTERCOOLER HEAT EXCHANGER FOR VEHICLE USING CFD SIMULATION Pshtiwan Mohammad Sharif, A. Aziz Hairuddin, Azizan As arry and Khairil Anas Md. Rezali, M.M. Noor, Saman Mohammad Sharif 2 P P Presenter: PSHTIWAN MOHAMMAD SHARIF AIR FLOW OPTIMIZATION OF THE VEHICLE COOLING SYSTEM TEST RIG Lee Jun Hao, Zulkarnain Abdul Latiff, Mohd Rozi Mohd Perang, Mohd Farid Muhamad Said Presenter: MOHD ROZI MOHD PERANG THERMAL PERFORMANCE OF AUTOMOTIVE RADIATOR WITH GRAPHENE NANOPLATELETS SUSPENSION L. K. L. Toh, T. W. Ting 4 P P Presenter: LESLIE TOH NANOCELLULOSE AS HEAT TRANSFER LIQU IN HEAT EXCHANGER F.Benedict, K.Kadirgama, D.Ramasamy, M.M.Noor, M.Samykano, M.M.Rahman, Sagmesh B Presenter: ASSOC.PROF.TS. IR. DR.KUMARAN KADIRGAMA OPTIMISED MODELLING ON LATERAL SEPARATION OF TWIN-PONTOON- NET FLOATING BREAKWATER S.F. Abdullah, A. Fitriadhy, M. Hairil, M.F. Ahmad, A. Jusoh and M.M. Noor 6 P Presenter: DR. MOHD HAIRIL BIN MOHD PRELIMINARY INVESTIGATIONS OF ACRYLONITRILE BUTADIENE STYRENE (ABS) PROPERTIES S.K. Selvamani, S.R. Subramaniam, W.K. Ngui, M. Samykano, K. Kadirgama, K. Sudhakar Presenter: DR NGUI WAI KENG
9 SESSION 3C VENUE: ROOM 3 DATE: 26/07/2018 TIME: AM CHAIRPERSON: ASSOC. PROF. DR. MOHD FAR BIN MUHAMAD SA (UTM) 1 P COMBUSTION CHARACTERISTICS OF BIODIESEL BLENDED WITH Al2O3 AND SiO2 NANOPARTICLES M.Akmal Adzmi, Adam Abdullah, Afif Naqiuddin 2 P Presenter: Mohd Akmal Adzmi FLOW COEFFICIENT AND DISCHARGE ANALYSIS IN SMALL ENGINE OF MOTORCYCLES USING STEADY-STATE FLOW BENCHES Bambang Wahono, Ocktaeck Lim 3 P Presenter: Bambang Wahono A REVIEW OF HYDROGEN ADDITION IN AN HCCI ENGINE FUELLED WITH BIOFUELS M S M Alias, A A Hairuddin, M K Hassan, K A M Rezali 4 P Presenter: MOHD SHAHRUDIN BIN MOHD ALIAS AN EXPERIMENTAL STUDY OF THE PERFORMANCE AND EMISSION CHARACTERISTICS OF A COMPRESSION IGNITION (CI) ENGINE FUELLED WITH PALM OIL BASED BIODIESEL M. Norhafana, M.M.Noor, A.A. Hairuddin, Suria Idawati Ayob 5 P Presenter: NORHAFANA MOHAMED THE INFLUENCE OF INJECTOR PRESSURE ON FUEL GRADE ETHANOL (E96) FOUR STROKE COMBUSTION ENGINE H. Wibowo, Y. Syaefullah, A.A.P. Susastriawan, E.S. Arbintarso 6 P Presenter: ELLYAWAN S ARBINTARSO STABILITY AND PHYSIOCHEMICAL EVALUATION OF TRI-FUEL EMULSION (DIESEL-ETHANOL-BIODIESEL) WITH AND WITHOUT SURFACTANT M. Nazrul H. M. Bahrudin, M. Mukhtar N. A., Ftwi Y. Hagos, Rizalman Mamat, A. Adam Abdullah, Zainal Ambri Abdul Karim Presenter: DR. FTWI YOHANESS HAGOS
10 SESSION 4A VENUE: ROOM 1 DATE: 26/07/2018 TIME: PM CHAIRPERSON: ASSOC. PROF. DR AHMAD RAZLAN YUSOFF (UMP) 1 P A MINI REVIEW: LEAN MANAGEMENT TOOLS IN ASSEMBLY LINE AT AUTOMOTIVE INDUSTRY M. Z. M. Ismail, A. H. Zainal, N.I. Kasim 2 P Presenter: AZIANASHIMA HEEDAYU ZAINAL SOLVING MOISTURE CONTAMINATED DAMPER OIL CONTROL PROBLEM USING TQM APPROACH Norzima Zulkifli, Noor Fadhili Bin Mohamad Fadhil 3 P Presenter: ASSOC. PROF. DR. NORZIMA ZULKIFLI THE IMPACT OF TECHNOLOGICAL INNOVATION CAPABILITIES ON COMPETITIVE ADVANTAGE AND FIRM PERFORMANCE Faridah binti Taju Rahim, Professor Dato Dr. Yuserrie bin Zainuddin 4 P P P Presenter: FARAH BINTI TAJU RAHIM COBALT NANOWIRES: ADVANCING INTO FUTURE NANOMATERIAL U. Santip, W.K. Ngui, M. Samykano, K. Sudhakar, K. Kadirgama, A.G.N. Sofiah Presenter: DR. MAHENDRAN A/L SAMYKANO PRELIMINARY INVESTIGATIONS OF POLYLACTIC AC (PLA) PROPERTIES S.R. Subramaniam, S.K. Selvamani, W.K. Ngui, M. Samykano, K. Kadirgama, K. Sudhakar Presenter: DR NGUI WAI KENG INVERSE METHOD FOR MATERIAL PROPERTIES ENTIFICATION OF KENAF REINFORCED COMPOSITE TEST MODEL C Peter, M N Abdul Rani, M A Yunus, A Kalam, M S Mohd Zin Presenter: CRYSTAL ANAK PETER
11 SESSION 4B VENUE: ROOM 2 DATE: 26/07/2018 TIME: PM CHAIRPERSON: DR. DEVARAJAN A/L RAMASAMY (UMP) 1 P OPTIMIZATION-BASED POWER MANAGEMENT SYSTEM FOR AN ELECTRIC VEHICLE WITH A HYBR ENERGY STORAGE SYSTEM S. Gonsrang and R. Kasper 2 P P Presenter: S. GONSRANG TWO INPUTS OF ENERGY SOURCES IN ELECTRIC VEHICLE A.R.Asari, A.F. Faraid Presenter: ASHRAF ROHANIM ASARI THERMAL MANAGEMENT OF VEHICLE RADIATOR BY NANOCELLULOSE WITH ONE-DIMENSIONAL ANALYSIS F.Benedict, K.Kadirgama, D.Ramasamy, M.M.Noor, M.Samykano, M.M.Rahman, Sagmesh B 4 P Presenter: ASSOC.PROF.TS. IR. DR.KUMARAN KADIRGAMA ANALYSIS ON THE EFFECTS OF DECK L REAR SPOILER TO THE CAR AERODYNAMICS USING CFD METHOD A. Z. M. Alias, M. R. M. Nawi 5 P Presenter: DR MUHAD ROZI MAT NAWI DESIGN AND PARAMETRIC CHARACTERIZATION OF FLEXURE BEARING AS AUTOMOTIVE VALVE SPRING REPLACEMENT M. Razali Hanipah, Shahin Mansor, M.R.M. Akramin, Akhtar Razul Razali Presenter: DR. MOHD RAZALI HANIPAH
12 SESSION 4C VENUE: ROOM 3 DATE: 26/08/2016 TIME: PM CHAIRPERSON: DR. FTWI YOHANESS HAGOS (UMP) 1 P AN INVESTIGATION OF THE GAS JET CHARACTERISTICS OF AN 800kPa CNG INJECTOR S Thongchai and O Lim 2 P Presenter: BAMBANG WAHONO INVESTIGATION AND ANALYSIS OF COMBUSTION CHARACTERISTICS, ENGINE PERFORMANCES AND EMISSIONS OF NEAT PALM OIL BIODIESEL-LONG CHAIN ALCOHOL FUEL BLENDS G M Anes, H Zurina, A. Zuhaira, A Adam 3 P Presenter: G M Anes ONE-DIMENSIONAL SIMULATION OF PORT WATER INJECTION USING FOR A SPARK IGNITION ENGINE C H Ling and M A Abas 4 P Presenter: DR. MOHD AZMAN BIN ABAS EFFECT OF BHA AND BHT ANTIOXANT ADDITIVES ON ENGINE PERFORMANCE AND EMISSION OF A CI ENGINE FUELED WITH PALM OIL METHYL ESTER-DIESEL BLEND Mohd Hafiz Ali, Mohd Hafizil Mohd Yasin, Adam Abdullah 5 P Presenter: Mohd Hafiz Ali WEAR TESTING ANALYSIS ON CYLINDER HEAD VALVE FOR CNG FUELED ENGINE N.W. Awang, D.Ramasamy, M. M. Rahman, M.M.Noor, K. Kadirgama Presenter: N.W. Awang
DR. AHMAD FITRI BIN YUSOP Senior Lecturer
UMP CV Academic Qualifications DR. AHMAD FITRI BIN YUSOP Senior Lecturer Faculty of Mechanical, Universiti Malaysia Pahang, 26600 UMP, Pekan, Pahang, MALAYSIA. Tel: 609-4242278, Fax: 609-4242202 Tel: +609-424
More informationDESIGN OF CUSTOMIZED MODULAR CYLINDER HEAD FOR SI-ENGINE
DESIGN OF CUSTOMIZED MODULAR CYLINDER HEAD FOR SI-ENGINE Athirah Abdul Aziz 1, Adlansyah Abd Rahman 2 and Abdul Aziz Hassan 3 1 College of Graduate Studies, Universiti Tenaga Nasional, Kajang, Selangor,
More informationKFH LIBSHARA ACCOUNT-i WEEKLY WINNERS LIST: SEPTEMBER Samsung Galaxy A5 LTE Smart Phone Week 18 Customer Name
WEEKLY WINNERS LIST: SEPTEMBER 2017 Week 18 WEEKLY WINNERS LIST: AUGUST 2017 MAZILAH BINTI MOHAMAD IRFAN BIN MOHAMAD RUSLAN AKHTAR BIN RUZMAN AZLEE KAMARUZZAMAN BIN PADIL NUR FAUZIANA BINTI BAHRUDDIN CHEE
More informationJUDICIARY (Tel: ) No Ext High Court Tel No. 5 Tuan Meor Sulaiman Bin Ahmad Tarmizi 218 Judge, Sessions Court (2)
JUDICIARY (Tel: 231 4020) No Ext High Court Tel No 1 Y.A.Dato Haji Ahmad Nasfy Bin Haji Yasin 106 Judge, High Court (1) 231 3929 Secretary: Cik Norain binti Mohd Yunos 2 Y.A.Puan Siti Khadijah Binti S.
More informationUNITEN Industry Advisory Panel
UNITEN Industry Advisory Panel UNITEN Industry Advisory Panel is made up of leading industry advisors from various disciplines. Their roles are to assist colleges in the planning and continuous quality
More informationFINAL EXAMINATION SCHEDULE POSTGRADUATE STUDIES SEMESTER II SESSION 2015/2016 FACULTY OF EDUCATION
Table Total Pr. Datuk Dr. Mohamed Najib bin Abdul Ghaffar Assoc. Pr. Dr. Abdul Rahim bin Hamdan 0 34 Assoc. Pr. Dr. M. Al-Muzammil bin Hj. Mohd Yasin Dr. Mahani binti Mokhtar 0 6 Tuesday 7/6/06 MPU04/
More informationPerformance analysis of TEGs applied in the EGR path of a heavy duty engine for a Transient Drive Cycle
Performance analysis of TEGs applied in the EGR path of a heavy duty engine for a Transient Drive Cycle Thermo-electric Group Department of Aeronautical and Automotive Engineering Prof. Richard Stobart
More informationCURRICULUM VITAE. Institution of Mechanical Engineers (IMechE), Associate Member, 2015
CURRICULUM VITAE PERSONAL DETAILS Name Designation Faculty Mohamad Ali Bin Ahmad Senior Lecturer Faculty of Mechanical Engineering Tel. No. (Office) 03-55436250 Tel. No. Mobile 012-3319244 E-mail Address
More informationGROUP 23 (9:00-5:00PM) - 24th December 2014, MKP1. Dr. Abdul Rahman bin Kram
EKT STUDENTS KHAIRIL HAFIZI BIN SHAFEI RPS Management Pn. Salina binti Mohd. Dr. Yasmin binti Mohd. :0 AM - System Asi Yacob :0 AM MOHAMMAD NIZAM BIN YUSUFF ABDI KAREM MOHAMED SULEIMAN GROUP (:00-:00PM)
More informationNO SEAT GENDER RANK NAME PROGRAM 1 1R 1 M Sonny Zulhuda Doctor of Philosophy (Law) 2 1R 2 M Yusri bin Mohamad Doctor of Philosophy (Law) 3 1R 3 M
1 1R 1 M Sonny Zulhuda Doctor of Philosophy (Law) 2 1R 2 M Yusri bin Mohamad Doctor of Philosophy (Law) 3 1R 3 M Saprudin bin Mohd Sharif Doctor of Philosophy (Law) 4 1R 4 M Yusuff Jelili Amuda Doctor
More informationCrankcase scavenging.
Software for engine simulation and optimization www.diesel-rk.bmstu.ru The full cycle thermodynamic engine simulation software DIESEL-RK is designed for simulating and optimizing working processes of two-
More informationTHE NOVEL CONTINUES BIODIESEL USING ULTRASOUND CLAMP TUBULAR REACTOR PROJECT LEADER PROF. DR. SULAIMAN BIN HAJI HASAN
THE NOVEL CONTINUES BIODIESEL USING ULTRASOUND CLAMP TUBULAR REACTOR PROJECT LEADER PROF. DR. SULAIMAN BIN HAJI HASAN GROUP MEMBER PROF. ING DARWIN SEBAYANG DR. IR. PUDJI UNTORO ASSOC. PROF. DR. ANIKA
More information2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016)
2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) MATEC Web of Conferences Volume 90 (2017) Cyberjaya, Malaysia 2-3 August 2016 Editors: S.A. Che Ghani W.A. Wan Hamzah
More information11 APRIL 2018 (WEDNESDAY) TUTORIAL ROOM 1 PROGRESS PRESENTATION FACULTY OF CIVIL AND ENVIRONMENTAL ENGINEERING SEMESTER 2 SESSION 2017/2018
SEMESTER 2 TUTORIAL ROOM 1 1 2 SYAHRUN NEIZAM BIN MOHD DZULKIFLI (GF130161) INVESTIGATION OF INDOOR AIR QUALITY IN MUSEUM ENVIRONMENT ALI AHMED MOHAMMED MOHAMMED (HF160001) An Expert System For Prediction
More informationEFFICACY OF WATER-IN-DIESEL EMULSION TO REDUCE EXHAUST GAS POLLUTANTS OF DIESEL ENGINE
EFFICACY OF WATER-IN-DIESEL EMULSION TO REDUCE EXHAUST GAS POLLUTANTS OF DIESEL ENGINE Z. A. Abdul Karim, Muhammad Hafiz Aiman and Mohammed Yahaya Khan Mechanical Engineering Department, Universiti Teknologi
More informationComparative Analysis of Performance and Emission of a Homogenous Combustion Compressed Natural- Gas Direct Injection Engine
International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol:16 No:1 173 Comparative Analysis of Performance and Emission of a Homogenous Combustion Compressed Natural- Gas Direct Injection
More informationNumerical Investigation of the Effect of Excess Air and Thermal Power Variation in a Liquid Fuelled Boiler
Proceedings of the World Congress on Momentum, Heat and Mass Transfer (MHMT 16) Prague, Czech Republic April 4 5, 2016 Paper No. CSP 105 DOI: 10.11159/csp16.105 Numerical Investigation of the Effect of
More informationExperimental Investigation of Performance and Emissions of a Stratified Charge CNG Direct Injection Engine with Turbocharger
MATEC Web of Conferences 1, 7 (17 ) DOI:1.11/matecconf/1717 ICTTE 17 Experimental Investigation of Performance and Emissions of a Stratified Charge CNG Direct Injection Engine with charger Hilmi Amiruddin
More information21-Oct-18 ADAWIYAH BINTIKAMALUDDIN MOHD NURUL AMIN BINHUSSIN. 22-Oct-18
Date: 29 th October 2018 Ref: TG/Memo/2018 Activation Campaign 2018 ACTIVATION CAMPAIGN WINNERS (21 27 OCTOBER 2018) Congratulations to all winners! 21-Oct-18 M91-M-1509397 TPA301512 M91-M-1508939 M91-M-1509050
More informationNumerical Study on the Combustion and Emission Characteristics of Different Biodiesel Fuel Feedstocks and Blends Using OpenFOAM
Numerical Study on the Combustion and Emission Characteristics of Different Biodiesel Fuel Feedstocks and Blends Using OpenFOAM Harun M. Ismail 1, Xinwei Cheng 1, Hoon Kiat Ng 1, Suyin Gan 1 and Tommaso
More informationINFLUENCE OF FUEL TEMPERATURE ON DIESEL ENGINE PERFORMANCE OPERATING WITH BIODIESEL BLEND
Journal of Mechanical Engineering and Sciences (JMES) ISSN (Print): 2289-4659; e-issn: 2231-8380; Volume 2, pp. 226-236, June 2012 Universiti Malaysia Pahang, Pekan, Pahang, Malaysia DOI: http://dx.doi.org/10.15282/jmes.2.2012.10.0021
More informationVALIDATION OF ROAD LOAD CHARACTERISTIC OF A SUB-COMPACT VEHICLE BY ENGINE OPERATION
International Journal of Automotive and Mechanical Engineering (IJAME) ISSN: 2229-8649 (Print); ISSN: 2180-1606 (Online); Volume 9, pp. 1820-1831, January-June 2014 Universiti Malaysia Pahang DOI: http://dx.doi.org/10.15282/ijame.9.2013.29.0151
More informationDIRECT INJECTION OF WATER MIST IN AN INTAKE MANIFOLD SPARK IGNITION ENGINE. Phone: ; Fax: ABSTRACT
International Journal of Automotive and Mechanical Engineering (IJAME) ISSN: 2229-8649 (Print); ISSN: 2180-1606 (Online); Volume 11, pp. 2809-2819, January-June 2015 Universiti Malaysia Pahang DOI: http://dx.doi.org/10.15282/ijame.11.2015.55.0236
More information4. With a neat sketch explain in detail about the different types of fuel injection system used in SI engines. (May 2016)
SYED AMMAL ENGINEERING COLLEGE (Approved by the AICTE, New Delhi, Govt. of Tamilnadu and Affiliated to Anna University, Chennai) Established in 1998 - An ISO 9001:2000 Certified Institution Dr. E.M.Abdullah
More informationEFFECT OF INJECTION TIMING ON SINGLE CYLINDER DIESEL ENGINE WITH BIOFUEL
EFFECT OF INJECTION TIMING ON SINGLE CYLINDER DIESEL ENGINE WITH BIOFUEL Erdiwansyah 1,2, 2 Fakultas Teknik, Universitas Serambi Mekah, Aceh, Indonesia Email: erdi.wansyah@yahoo.co.id R. Mamat 1, M.S.M.
More informationRembau Challenge 2016
ory Results 1 130 Muhammad Azan 03:07:10 1 1 00:00:00 00:00:00 2 248 Muhamad Amirul Fikri Bin Abdullah Baju 03:14:41 2 2 00:07:31 00:07:31 3 209 wilfred 03:14:42 3 3 00:07:32 00:07:32 4 200 mohd nazri
More informationDRAFT MALAYSIAN STANDARD. Electric motorcycles - Part 1: General OFFICER/SUPPORT STAFF: (MMS / )
DRAFT MALAYSIAN STANDARD 13L002R0 STAGE : PUBLIC COMMENT (40.20) DATE : 01/09/2014-31/10/2014 Electric motorcycles - Part 1: General OFFICER/SUPPORT STAFF: (MMS / ) ICS: 43.120; 43.140 Descriptors: electric
More informationNumerical investigation of in-cylinder flow characteristics of hydrogen-fuelled internal combustion engine
Journal of Mechanical Engineering and Sciences (JMES) ISSN (Print): 2289-4659; e-issn: 2231-8380; olume 10, Issue 1, pp. 1792-1802, June 2016 Universiti Malaysia Pahang, Malaysia DOI: http://dx.doi.org/10.15282/jmes.10.1.2016.4.0172
More informationForecasting Crude Palm Oil (CPO) Prices Using Time Series Analysis (ARIMA/SARIMA).
FACULTY OF SCIENCE, TECHNOLOGY AND HUMAN DEVELOPMENT FINAL YEAR PROJECT S TITLES SEMESTER 2 SESSION 2015/16 MATHEMATICS AND STATISTICS DEPARTMENT (JMS) STATISTICS PANEL No. Name of Supervisor Title of
More informationExperimental and Analysis of Vehicle Dynamics Performance based on Driving Behavior
Journal of Mechanical Engineering Vol SI 1 (1), 193-206, 2017 Experimental and Analysis of Vehicle Dynamics Performance based on Driving Behavior Mohd Azman Abdullah a,b*, Munaliza Ibrahim b, Muhammad
More informationEFFECT OF BUTANOL-DIESEL BLENDS IN A COMPRESSION IGNITION ENGINE TO REDUCE EMISSION
Rasayan J. Chem., 10(1), 190-194 (2017) http://dx.doi.org/10.7324/rjc.2017.1011609 Vol. 10 No. 1 190-194 January - March 2017 ISSN: 0974-1496 e-issn: 0976-0083 CODEN: RJCABP http://www.rasayanjournal.com
More informationSimulation Study of Combustion Characteristics of Diesel- Ethanol-Palm Oil Methyl Ester Blends in Diesel Engine
44, Issue 1 (2018) 149-156 Journal of Advanced Research in Fluid Mechanics and Thermal Sciences Journal homepage: www.akademiabaru.com/arfmts.html ISSN: 2289-7879 Simulation Study of Combustion Characteristics
More informationDESIGN OF COMPRESSED NATURAL GAS MIXER USING COMPUTATIONAL FLUID DYNAMICS. D. Ramasamy, S. Mahendran, K. Kadirgama and M. M. Noor
National Conference in Mechanical Engineering Research and Postgraduate Students (1 st NCMER 2010) 26-27 MAY 2010, FKM Conference Hall, UMP, Kuantan, Pahang, Malaysia; pp. 614-620 ISBN: 978-967-5080-9501
More informationEffect of Jatropha Biodiesel Blend with Diesel Fuel on Performance of Four Stroke Single Cylinder Diesel Engine
Effect of Jatropha Biodiesel Blend with Diesel Fuel on Performance of Four Stroke Single Cylinder Diesel Engine Deep patel a, Amit shah b, Vijay Dhiman c a PG Student, Mechanical Engineering Department,
More informationDRAFT MALAYSIAN STANDARD. Electric motorcycles - Part 1: General OFFICER/SUPPORT STAFF: (MMS / )
DRAFT MALAYSIAN STANDARD 13L002R0 STAGE : PUBLIC COMMENT (40.20) DATE : 01/09/2015-31/10/2015 Electric motorcycles - Part 1: General OFFICER/SUPPORT STAFF: (MMS / ) ICS: 43.120; 43.140 Descriptors: electric
More informationFigure 1: The Turbocharger cross-section with turbine and compressor connected with shaft [2]
International Journal of Applied Engineering Research ISSN 973-456 Volume 13, Number 1 (18) pp. 691-696 Effects of Pressure Boost on the Performance Characteristics of the Direct Injection Spark Ignition
More informationPrediction of Performance and Emission of Palm oil Biodiesel in Diesel Engine
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) ISSN: 2278-1684, PP: 16-20 www.iosrjournals.org Prediction of Performance and Emission of Palm oil Biodiesel in Diesel Engine Sumedh Ingle 1,Vilas
More informationPETRONAS ROTATING EQUIPMENT ANALYTICS (PROTEAN)
PETRONAS ROTATING EQUIPMENT ANALYTICS (PROTEAN) Presented by Khairil Azwan B Khabri COE Upstream Gavin Halls COE Upstream 2017 PETROLIAM NASIONAL BERHAD (PETRONAS) All rights reserved. No part of this
More informationMSFI TECHNOLOGY AT SAFRAN AIRCRAFT
MSFI TECHNOLOGY AT SAFRAN AIRCRAFT ENGINES S. BOURGOIS 08/03/2017 Ce document et les informations qu il contient sont la propriété de Safran. Ils ne doivent pas être copiés ni communiqués à un tiers sans
More informationCOMBUSTION AND EXHAUST EMISSION IN COMPRESSION IGNITION ENGINES WITH DUAL- FUEL SYSTEM
COMBUSTION AND EXHAUST EMISSION IN COMPRESSION IGNITION ENGINES WITH DUAL- FUEL SYSTEM WLADYSLAW MITIANIEC CRACOW UNIVERSITY OF TECHNOLOGY ENGINE-EXPO 2008 OPEN TECHNOLOGY FORUM STUTTGAT, 7 MAY 2008 APPLICATIONS
More informationDESIGN AND SIMULATION OF A CYLINDER HEAD STRUCTURE FOR A COMPRESSED NATURAL GAS DIRECT INJECTION ENGINE
International Journal of Automotive and Mechanical Engineering (IJAME) ISSN: 9-8649 (Print); ISSN: 180-1606 (Online); Volume 9, pp. 160-169, January-June 014 Universiti Malaysia Pahang DOI: http://dx.doi.org/10.158/ijame.9.013.1.0134
More informationFoundations of Thermodynamics and Chemistry. 1 Introduction Preface Model-Building Simulation... 5 References...
Contents Part I Foundations of Thermodynamics and Chemistry 1 Introduction... 3 1.1 Preface.... 3 1.2 Model-Building... 3 1.3 Simulation... 5 References..... 8 2 Reciprocating Engines... 9 2.1 Energy Conversion...
More informationDLR s Free Piston Linear Generator FPLG Development of an Innovative Linear Power Unit
DLR s Free Piston Linear Generator FPLG of an Innovative Linear Power Unit Florian Kock September 8, 2015 www.dlr.de Slide 1 > Kock > FKLG > 2015-09-08 FPLG Project Overview A Decade of Linear Power 2002
More informationDr. Abdul Adam bin Abdullah Sr.Lecturer Faculty of Mechanical Engineering, Universiti Malaysia Pahang, Pekan, Pahang, MALAYSIA.
Dr. Abdul Adam bin Abdullah Sr.Lecturer Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang, MALAYSIA. Tel: 609-424 6353, Fax: 609-424 6345 Email: adam@ump.edu.my http://scholar.google.com.my/citations?user=uojwa_eaaaaj&hl=en
More informationPresenter: Sébastien Bourgois (SN)
Multi point i injection i system development at Snecma Presenter: Sébastien Bourgois (SN) Outline Overview of Multipoint Injection System development at SNECMA Tools used for conception An example: LEMCOTEC
More informationNational Institute of Technology, Tiruchirappalli: Performa for CV of Faculty/ Staff Members
Curriculum Vitae 1. Name: S.Vedharaj 2. Designation: Assistant Professor 3. Office Address: M-13, Department of Mechanical Engineering, National Institute of Technology, Tiruchirappalli - 620015 4. Telephone:
More informationIntroduction. Keywords: Nozzle diameter, premix injector, Eulerian multiphase flow, burner. a b
Effects of Nozzle Diameter on the Spray Characteristics of Premix Injector in Burner System SHAHRIN Hisham Amirnordin a, SALWANI Ismail, RONNY Yii Shi Chin, NORANI Mansor, MAS Fawzi, AMIR Khalid b Combustion
More informationCOMBUSTION CHARACTERISTICS OF A DIESEL-HYDROGEN DUAL FUEL ENGINE UMP, Pekan, Pahang, Malaysia Phone:
National Conference in Mechanical Engineering Research and Postgraduate Studies (2 nd NCMER 2010) 3-4 December 2010, Faculty of Mechanical Engineering, UMP Pekan, Kuantan, Pahang, Malaysia; pp. 23-32 ISBN:
More informationPERFORMANCE OF DIRECT INJECTION C.I. ENGINE USING KARANJA OIL AT DIFFERENT INJECTION PRESSURES
IJRET: International Journal of Research in Engineering and Technology eissn: 239-63 pissn: 232-738 PERFORMANCE OF DIRECT INJECTION C.I. ENGINE USING KARANJA OIL AT DIFFERENT INJECTION PRESSURES A.G. Matani,
More informationINFLUENCE OF PALM METHYL ESTER (PME) AS AN ALTERNATIVE FUEL IN MULTICYLINDER DIESEL ENGINE
Journal of Mechanical Engineering and Sciences (JMES) ISSN (Print): 2289-4659; e-issn: 2231-838; Volume 3, pp. 331-339, December 212 Universiti Malaysia Pahang, Pekan, Pahang, Malaysia DOI: http://dx.doi.org/1.15282/jmes.3.212.9.31
More informationMARKET SERVICES THE MALAYSIAN INSURANCE DIRECTORY 36TH ISSUE
399 MARKET SERVICES 400 CENTRAL ADMINISTRATION BUREAU Supervisory Board Members 2018/2019 Date of Formation : 12th October 1995 Secretariat Address : 12th Floor, Bangunan Malaysian Re 17, Lorong Dungun
More informationUNIVERSITI KUALA LUMPUR
List of Students 2--20 02: PM Page 0000 MUHAMMAD HAFIZ IZUDDIN BIN ZULKIFLI 222 9600040 July 20 NORHANI BINTI JUSOH Bachelor of Engineering Technology (Hons) in Biosystem C CSB00 DOWNSTREAM PROCESSING
More informationInvestigation of the effects of inlet system configuration on the airflow characteristics
IOP Conference Series: Materials Science and Engineering OPEN ACCESS Investigation of the effects of inlet system configuration on the airflow characteristics To cite this article: Shafiq Suhaimi et al
More informationAcademic Qualifications
Academic Qualifications Dr. Mohd Razali Bin Hanipah Senior Lecturer Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang, MALAYSIA. Tel: 609-424 6252, Fax: 609-424 6222 Email:
More informationInvestigation of Fuel Flow Velocity on CNG Engine using New Injector
Investigation of Fuel Flow Velocity on CNG Engine using New Injector Hari Prastowo 1, Semin 1*, M. Badrus Zaman 1, Amiadji 1, T. Bambang Musrijadi 1, Agoes Santoso 1, Dwi Priyanta 1, Sardono Sarwito 1,
More informationRK93_GROUP 1 (30th May 2017 Tuesday)
_GROUP 1 (0th May 2017 Tuesday) 1 LEE KAH YEE Dr. Naimah binti Yaakob Software Defined Network Principles to Include Optical Network 9:00-9:2 2 CONSTANCE ANAK MIGA Dr. Naimah binti Yaakob Performance Evaluation
More informationMethanol recovery during transesterification of palm oil in a TiO2/Al2O3 membrane reactor: Experimental study and neural network modeling
University of Malaya From the SelectedWorks of Abdul Aziz Abdul Raman 2010 Methanol recovery during transesterification of palm oil in a TiO2/Al2O3 membrane reactor: Experimental study and neural network
More informationDevelopment of Variable Geometry Turbocharger Contributes to Improvement of Gasoline Engine Fuel Economy
Development of Variable Geometry Turbocharger Contributes to Improvement of Gasoline Engine Fuel Economy 30 MOTOKI EBISU *1 YOSUKE DANMOTO *1 YOJI AKIYAMA *2 HIROYUKI ARIMIZU *3 KEIGO SAKAMOTO *4 Every
More informationS.Sivaraj #1, A.Hazemohzammed *1, M.Yuvaraj *2, N.Karthikeyan *3, V.Murugan *4, # Assistant Prof., Dept, * U.G Students,
Structural Analysis of Ladder Chassis Frame for car UsingAnsys S.Sivaraj #1, A.Hazemohzammed *1, M.Yuvaraj *2, N.Karthikeyan *3, V.Murugan *4, # Assistant Prof., Dept, * U.G Students, Dept of mechanical
More informationPowertrain Efficiency Technologies. Turbochargers
Powertrain Efficiency Technologies Turbochargers Turbochargers increasingly are being used by automakers to make it possible to use downsized gasoline engines that consume less fuel but still deliver the
More informationEFFECT OF MOTORING VOLTAGE ON COMPRESSION RATIO OF A FREE-PISTON LINEAR GENERATOR ENGINE
Journal of Mechanical Engineering and Sciences (JMES) ISSN (Print): 2289-4659; e-issn: 2231-8380; Volume 8, pp. 1393-1400, June 2015 Universiti Malaysia Pahang, Malaysia DOI: http://dx.doi.org/10.15282/jmes.8.2015.14.0136
More informationStudent Id Advisor Name Advisor Note.
1031109818 Chan Gaik Yee gychan@mmu.edu.my 1061111858 Noramiza Binti Hashim noramiza.hashim@mmu.edu.my 1081100516 Nathar Shah Bin Packier Mohammad nathar.packier@mmu.edu.my 1091100629 Chikkannan Eswaran
More informationBIL NAMA PENUH NO. K.P. (TANPA SENGKANG) JAWATAN / UNIT NO.AHLI 1 PROF MADYA DR. ABDUL RASHID BIN MOHAMAD KETUA PESURUHJAYA PENGAKAP
BIL NAMA PENUH NO. K.P. (TANPA SENGKANG) JAWATAN / UNIT NO.AHLI 1 PROF MADYA DR. ABDUL RASHID BIN MOHAMAD 560204075609 KETUA PESURUHJAYA PENGAKAP NEGERI L 017 / 001 2 DR. MOHD ANUAR BIN ARSHAD 710109085789
More informationSimulation of the Mixture Preparation for an SI Engine using Multi-Component Fuels
ICE Workshop, STAR Global Conference 2012 March 19-21 2012, Amsterdam Simulation of the Mixture Preparation for an SI Engine using Multi-Component Fuels Michael Heiss, Thomas Lauer Content Introduction
More informationCombustion and emissions characteristics of a compression ignition engine fueled with n-butanol blends
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Combustion and emissions characteristics of a compression ignition engine fueled with n-butanol blends To cite this article: I
More informationResearch Activity Report (June Dec 2015) A). Papers published by the faculty members in National and International Journals:
Activity Report (- Dec 2015) 1. activities of the faculty members: Number of faculty in the Department : 39 Number of faculty with Ph D qualification : 10 Number of faculty pursuing Ph D : 15 A). Papers
More informationINFLUENCE OF ENGINE SPEED AND INJECTION TIMINGS ON IN-CYLINDER HEAT TRANSFER FOR PORT INJECTION HYDROGEN FUELED ENGINE
National Conference in Mechanical Engineering Research and Postgraduate Studies ( nd NCMER 0) 3- December 0, Faculty of Mechanical Engineering, UMP Pekan, Kuantan, Pahang, Malaysia; pp. 13-19 ISBN: 97-97-00-0-1;
More informationEXPERIMENTAL AND SIMULATION STUDIES TO DETERMINE THE EFFECTIVE OCTANE NUMBER IN AN ENGINE FUELLED WITH ETHANOL AND GASOLINE
International Journal of Automotive and Mechanical Engineering (IJAME) ISSN: 2229-8649 (Print); ISSN: 2180-1606 (Online); Volume 10, pp. 2057-2069, July-December 2014 Universiti Malaysia Pahang DOI: http://dx.doi.org/10.15282/ijame.10.2014.22.0173
More informationEvaluating tractor performance and exhaust gas emissions using biodiesel from cotton seed oil
IOP Conference Series: Materials Science and Engineering Evaluating tractor performance and exhaust gas emissions using biodiesel from cotton seed oil To cite this article: Saddam H Al-lwayzy et al 2012
More informationTheoretical Study of the effects of Ignition Delay on the Performance of DI Diesel Engine
Theoretical Study of the effects of Ignition Delay on the Performance of DI Diesel Engine Vivek Shankhdhar a, Neeraj Kumar b a M.Tech Scholar, Moradabad Institute of Technology, India b Asst. Proff. Mechanical
More informationFinite Element Analysis on Thermal Effect of the Vehicle Engine
Proceedings of MUCEET2009 Malaysian Technical Universities Conference on Engineering and Technology June 20~22, 2009, MS Garden, Kuantan, Pahang, Malaysia Finite Element Analysis on Thermal Effect of the
More informationEffect of Helix Parameter Modification on Flow Characteristics of CIDI Diesel Engine Helical Intake Port
Effect of Helix Parameter Modification on Flow Characteristics of CIDI Diesel Engine Helical Intake Port Kunjan Sanadhya, N. P. Gokhale, B.S. Deshmukh, M.N. Kumar, D.B. Hulwan Kirloskar Oil Engines Ltd.,
More informationLoad Analysis and Multi Body Dynamics Analysis of Connecting Rod in Single Cylinder 4 Stroke Engine
IJSRD - International Journal for Scientific Research & Development Vol. 3, Issue 08, 2015 ISSN (online): 2321-0613 Load Analysis and Multi Body Dynamics Analysis of Connecting Rod in Single Cylinder 4
More informationDual-fuel combustion for the introduction of renewable alcohol fuels in heavy-duty diesel engines
KTH ROYAL INSTITUTE OF TECHNOLOGY Dual-fuel combustion for the introduction of renewable alcohol fuels in heavy-duty diesel engines Nicola Giramondi Prof. Anders Christiansen Erlandsson (KTH) Dr. Anders
More informationAUTOMOTIVE TESTING AND OPTIMIZATION. Tools for designing tomorrow's vehicles
AUTOMOTIVE TESTING AND OPTIMIZATION Tools for designing tomorrow's vehicles 2 Measurement of flow around the side mirror by Particle Image Velocimetry (PIV). Courtesy of Visteon Deutschland GmbH Our advanced
More informationTHERMAL STRESS ANALYSIS OF HEAVY TRUCK BRAKE DISC ROTOR
Thermal Stress Analysis of heavy Truck Brake Disc Rotor THERMAL STRESS ANALYSIS OF HEAVY TRUCK BRAKE DISC ROTOR M.Z. Akop 1, R. Kien 2, M.R. Mansor 3, M.A. Mohd Rosli 4 1, 2, 3, 4 Faculty of Mechanical
More informationEffect of ethanol addition on the performance and exhaust emissions of a spark ignition engine
Journal of Mechanical Engineering and Sciences ISSN (Print): 2289-4659; e-issn: 2231-8380 Volume 11, Issue 2, pp. 2734-2742, June 2017 Universiti Malaysia Pahang, Malaysia DOI: https://doi.org/10.15282/jmes.11.2.2017.14.0248
More informationDESIGN AND SIMULATION OF A CYLINDER HEAD STRUCTURE FOR A COMPRESSED NATURAL GAS DIRECT INJECTION ENGINE
International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 Bukit Gambang Resort City, Kuantan, Pahang, Malaysia Organized by Faculty of Mechanical Engineering, Universiti Malaysia
More informationAlcohol Fueled. ed Vehicles. Ethanol application as vehicular fuel in Brazil. Volkswagen do Brasil. Henry Joseph, Jr.
Alcohol Fueled ed Vehicles Ethanol application as vehicular fuel in Brazil. Volkswagen do Brasil Henry Joseph, Jr. Up to 5% Ethanol blended with gasoline From 5% up to 10% blend cover cannot be aluminum
More informationElectronics control unit (ECU) for dual fuel HCCI Engine
Electronics control unit (ECU) for dual fuel HCCI Engine Manoj P. Gaikwad 1 and Prof. R. T. Patil 2 1 Student, E&Tc Dept, RIT, Islampur 2 Professor, E&Tc Dept, RIT, Islampur Abstract now a day s uses of
More informationDesign and Performance Analysis of Louvered Fin Automotive Radiator using CAE Tools
Design and Performance Analysis of Louvered Fin Automotive Radiator using CAE Tools Vishwa Deepak Dwivedi Scholar of Master of Technology, Mechanical Engineering Department, UCER, Allahabad, India Ranjeet
More informationINFLUENCE OF THE NUMBER OF NOZZLE HOLES ON THE UNBURNED FUEL IN DIESEL ENGINE
INFLUENCE OF THE NUMBER OF NOZZLE HOLES ON THE UNBURNED FUEL IN DIESEL ENGINE 1. UNIVERSITY OF RUSE, 8, STUDENTSKA STR., 7017 RUSE, BULGARIA 1. Simeon ILIEV ABSTRACT: The objective of this paper is to
More informationChapter 7: Thermal Study of Transmission Gearbox
Chapter 7: Thermal Study of Transmission Gearbox 7.1 Introduction The main objective of this chapter is to investigate the performance of automobile transmission gearbox under the influence of load, rotational
More informationAdvanced Propulsion/Powertrain Track
Advanced Propulsion/Powertrain Track The Powertrain, Fuels and Lubricants sessions focus on information in the area of properties, selection, processing, performance, use, and effects of fuels and lubricants
More informationFigure 1: The spray of a direct-injecting four-stroke diesel engine
MIXTURE FORMATION AND COMBUSTION IN CI AND SI ENGINES 7.0 Mixture Formation in Diesel Engines Diesel engines can be operated both in the two-stroke and four-stroke process. Diesel engines that run at high
More informationProposal to establish a laboratory for combustion studies
Proposal to establish a laboratory for combustion studies Jayr de Amorim Filho Brazilian Bioethanol Science and Technology Laboratory SCRE Single Cylinder Research Engine Laboratory OUTLINE Requirements,
More informationEFFECT ON PERFORMANCE AND COMBUSTION CHARACTERISTICS OF DIESEL ENGINE ENRICHED WITH HYDROGEN WITH VARIED PISTON BOWL GEOMETRY
International Journal of Mechanical Engineering and Technology (IJMET) Volume 6, Issue 10, Oct 2015, pp. 39-47, Article ID: IJMET_06_10_005 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=6&itype=10
More informationUsage Issues and Fischer-Tropsch Commercialization
Usage Issues and Fischer-Tropsch Commercialization Presentation at the CCTR Advisory Panel Meeting Terre Haute, Indiana June 1, 2006 Diesel Engine Research John Abraham (ME), Jim Caruthers (CHE) Gas Turbine
More informationComparison Fuel Consumption and Emissions of Light-Duty Diesel Vehicle Fuelled with Malaysian Diesel Grade Euro2M and Euro5
7, Issue 1 (2017) 1-6 Journal of Advanced Vehicle System Journal homepage: www.akademiabaru.com/aravs.html ISSN: 2550-2212 Comparison Fuel Consumption and Emissions of Light-Duty Diesel Vehicle Fuelled
More informationCURRICULUM VITAE. Education
CURRICULUM VITAE Abdul Aziz Bin Hairuddin Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor T: 03-8946 6331 F: 03-8656
More informationINFLUENCE OF FUEL TYPE AND INTAKE AIR PROPERTIES ON COMBUSTION CHARACTERISTICS OF HCCI ENGINE
ENGINEERING FOR RURAL DEVELOPMENT Jelgava, 23.-24.5.213. INFLUENCE OF FUEL TYPE AND INTAKE AIR PROPERTIES ON COMBUSTION CHARACTERISTICS OF HCCI ENGINE Kastytis Laurinaitis, Stasys Slavinskas Aleksandras
More informationEffect of Nanofluid on Friction Factor of Pipe and Pipe Fittings: Part I - Effect of Aluminum Oxide Nanofluid
Research Article International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347-5161 2014 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Effect
More informationCOMBUSTION CHARACTERISTICS OF DI-CI ENGINE WITH BIODIESEL PRODUCED FROM WASTE CHICKEN FAT
COMBUSTION CHARACTERISTICS OF DI-CI ENGINE WITH BIODIESEL PRODUCED FROM WASTE CHICKEN FAT K. Srinivasa Rao Department of Mechanical Engineering, Sai Spurthi Institute of Technology, Sathupally, India E-Mail:
More informationin ultra-low NOx lean combustion grid plate
CFD predictions of aerodynamics and mixing in ultra-low NOx lean combustion grid plate flame stabilizer JOSÉ RAMÓN QUIÑONEZ ARCE, DR. ALAN BURNS, PROF. GORDON E. ANDREW S. SCHOOL OF CHEMICAL AND PROCESS
More informationAN EXPERIMENT STUDY OF HOMOGENEOUS CHARGE COMPRESSION IGNITION COMBUSTION AND EMISSION IN A GASOLINE ENGINE
THERMAL SCIENCE: Year 2014, Vol. 18, No. 1, pp. 295-306 295 AN EXPERIMENT STUDY OF HOMOGENEOUS CHARGE COMPRESSION IGNITION COMBUSTION AND EMISSION IN A GASOLINE ENGINE by Jianyong ZHANG *, Zhongzhao LI,
More informationEFFECTS OF PILOT INJECTION TIMING AND EGR ON A MODERN V6 COMMON RAIL DIRECT INJECTION DIESEL ENGINE Shah Alam, Selangor, Malaysia
International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 Bukit Gambang Resort City, Kuantan, Pahang, Malaysia Organized By Faculty of Mechanical Engineering, Universiti Malaysia
More informationKINEMATICAL SUSPENSION OPTIMIZATION USING DESIGN OF EXPERIMENT METHOD
Jurnal Mekanikal June 2014, No 37, 16-25 KINEMATICAL SUSPENSION OPTIMIZATION USING DESIGN OF EXPERIMENT METHOD Mohd Awaluddin A Rahman and Afandi Dzakaria Faculty of Mechanical Engineering, Universiti
More informationSustainable Energy Mod.1: Fuel Cells & Distributed Generation Systems
Sustainable Energy Mod.1: Fuel Cells & Distributed Generation Systems Dr. Ing. Mario L. Ferrari Thermochemical Power Group (TPG) - DiMSET University of Genoa, Italy : Internal Combustion Engines (ICE)
More informationTHE EFFECT OF INJECTOR POSITION ON DIRECT INJECTION HYDROGEN ENGINE CONDITIONS
Journal of Engineering Science and Technology Special Issue on 4th International Technical Conference 2014, June (2015) 55-61 School of Engineering, Taylor s University THE EFFECT OF INJECTOR POSITION
More informationL34: Internal Combustion Engine Cycles: Otto, Diesel, and Dual or Gas Power Cycles Introduction to Gas Cycles Definitions
Page L: Internal Combustion Engine Cycles: Otto, Diesel, and Dual or Gas Power Cycles Review of Carnot Power Cycle (gas version) Air-Standard Cycles Internal Combustion (IC) Engines - Otto and Diesel Cycles
More information