2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016)

Transcription

1 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016) MATEC Web of Conferences Volume 90 (2017) Cyberjaya, Malaysia 2-3 August 2016 Editors: S.A. Che Ghani W.A. Wan Hamzah A. Alias ISBN:

2 Printed from e-media with permission by: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY Some format issues inherent in the e-media version may also appear in this print version. This work is licensed under a Creative Commons Attribution license: You are free to: Share copy and redistribute the material in any medium or format. Adapt remix, transform, and build upon the material for any purpose, even commercial. The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms: You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. The copyright is retained by the corresponding authors. Printed by Curran Associates, Inc. (2017) For additional information, please contact EDP Sciences Web of Conferences at the address below. EDP Sciences Web of Conferences 17, Avenue du Hoggar Parc d'activité de Courtabœuf BP 112 F Les Ulis Cedex A France Phone: +33 (0) Fax: +33 (0) contact-edps@webofconferences.org Additional copies of this publication are available from: Curran Associates, Inc. 57 Morehouse Lane Red Hook, NY USA Phone: Fax: curran@proceedings.com Web:

3 TABLE OF CONTENTS DEVELOPMENT OF BATTERY MANAGEMENT SYSTEMS (BMS) FOR ELECTRIC VEHICLES (EVS) IN MALAYSIA... 1 Salehen P.M.W., Su ait M.S., Razali H., Sopian K. EFFECT OF ANNEALING, THICKNESS RATIO AND BEND ANGLE ON SPRINGBACK OF AA6061-T6 WITH NON-UNIFORM THICKNESS SECTION... 9 Adnan M.F., Abdullah A.B., Samad Zahurin ERGONOMICS STUDY FOR WORKERS AT FOOD PRODUCTION INDUSTRY Mohd Fazi Hamizatun, Nik Mohamed Nik Mohd Zuki, Ab Rashid Mohd Fadzil Faisae, Mohd Rose Ahmed Nasser THE IDENTIFICATION OF MALAYSIAN DRIVING STYLES USING THE MULTIDIMENSIONAL DRIVING STYLE INVENTORY Karjanto Juffrizal, Md. Yusof Nidzamuddin, Terken Jacques, Hassan Muhammad Zahir, Delbressine Frank, Hooft van Huysduynen Hanneke, Rauterberg Matthias SIMULATING AUTONOMOUS DRIVING STYLES: ACCELERATIONS FOR THREE ROAD PROFILES Karjanto Juffrizal, Md. Yusof Nidzamuddin, Terken Jacques, Delbressine Frank, Hassan Muhammad Zahir, Rauterberg Matthias CLUSTERING OF FREQUENCY SPECTRUMS FROM DIFFERENT BEARING FAULT USING PRINCIPLE COMPONENT ANALYSIS Yusof M.F.M., Nizwan C.K.E., Ong S.A., Ridzuan M.Q.M. REVERSE ENGINEERING OF B-PILLAR WITH 3D OPTICAL SCANNING FOR MANUFACTURING OF NON-UNIFORM THICKNESS PART Islam Md. Tasbirul, Abdullah A.B., Mahmud Mohamad Zihad DEVELOPMENT OF COMPREHENSIVE UNATTENDED CHILD WARNING AND FEEDBACK SYSTEM IN VEHICLE Sulaiman Norizam, Ghazali Kamarul Hawari, Jadin Mohd Shawal, Abdul Hadi Amran, Najib Muhammad Sharfi, Mohd Zain Mohd Salmizan, Abdul Halim Fatimah, Mohd Daud Suhaimi, Zahed Nurdiyana, Abdullah Abdul Adam MODERATING EFFECT OF ENVIRONMENTAL TURBULENCE ON FIRM S TECHNOLOGICAL INNOVATION CAPABILITIES (TIC) AND BUSINESS PERFORMANCE IN THE AUTOMOTIVE INDUSTRY IN MALAYSIA: A CONCEPTUAL FRAMEWORK binti Taju Rahim Faridah, bin Zainuddin Yuserrie SHAPE MEMORY ACTUATED SLIDING MECHANISM FOR RAPID SWITCHING BETWEEN BUTTON-PATTERNS FOR ADAPTED HUMAN-MACHINE INTERACTION AT DIFFERENT AUTOMATIZATION LEVELS IN AUTOMOBILES Sivaperuman Kalairaj Manivannan, Huang Wei Min THE INVESTIGATION OF DYNAMIC BEHAVIOUR OF A STRUCTURE USING WAVE-BASED SUBSTRUCTURING METHOD Ahmad Basri Ahmad Burhani, Abdul Rani Muhamad Norhisham, Yunus Mohd Azmi, Roslan Liyana, Wan Iskandar Mirza Wan Imaan Izhan THE INVESTIGATION OF THE DYNAMIC BEHAVIOUR OF A COMPLEX ASSEMBLED STRUCTURE USING THE FREQUENCY RESPONSE FUNCTION BASED SUBSTRUCTURING METHOD Wan Iskandar Mirza Wan Imaan Izhan, Abdul Rani Muhamad Norhisham, Yunus Mohd Azmi, Roslan Liyana, Ahmad Basri Ahmad Burhani RESPONSE SURFACE RECONCILIATION METHOD OF BOLTED JOINTS STRUCTURE Yunus Mohd Azmi, Nazri Sharifah, Abdul Rani Mohamad Norhisham, Tormodi Azela, Kasolang Salmiah EFFECT OF HEAT-TREATMENT ON THE HARDNESS AND MECHANICAL PROPERTIES OF BORON ALLOYED STEEL bin Khiyon Mohammad Raffik, Mohd Salleh Salwani STATE OF ART OF COOLING METHOD FOR DRY MACHINING Ramachandran Kaaliarasan, Yeesvaran Balakumaran, Kadirgama Kumaran, Ramasamy Devarajan, Che Ghani Saiful Anwar, Anamalai Keeran TECHNO-ECONOMIC AND SENSITIVITY ANALYSIS FOR GRID-CONNECTED RENEWABLE ENERGY ELECTRIC BOAT CHARGING STATION IN TERENGGANU Salleh N. A. S., Muda W. M. W. DESIGN AND DEVELOPMENT OF COIL CASING MRF BRAKE SYSTEM Siti Lydia R., Mokhtar R., Muhamad Husaini A.B., Norhaniza B.J.

4 EFFECT OF VARYING GEOMETRICAL PARAMETERS OF TRAPEZOIDAL CORRUGATED- CORE SANDWICH STRUCTURE Zaid N.Z.M., Rejab M.R.M., Jusoh A.F., Bachtiar D., Siregar J.P. COMPARISON PERFORMANCE OF SPLIT PLUG-IN HYBRID ELECTRIC VEHICLE AND HYBRID ELECTRIC VEHICLE USING ADVISOR Mohd Rashid Muhammad Ikram, Daniyal Hamdan, Mohamed Danial CORRELATION OF NUMERICAL AND EXPERIMENTAL ANALYSIS FOR DYNAMIC BEHAVIOUR OF A BODY-IN-WHITE (BIW) STRUCTURE Abdullah N.A.Z., Sani M.S.M., Rahman M.M., Zaman I. FINITE ELEMENT MODELLING AND UPDATING OF FRICTION STIR WELDING (FSW) JOINT FOR VIBRATION ANALYSIS Zahari Siti Norazila, Mohd Sani Mohd Shahrir, Ishak Mahadzir THE STUDY OF STABILITY, COMBUSTION CHARACTERISTICS AND PERFORMANCE OF WATER IN DIESEL EMULSION FUEL Syafiq Zulkifli, Fahmi Othman, Awad Omar. I, Adam Abdullah ENGINE PERFORMANCE TESTING USING VARIABLE RON95 FUEL BRANDS AVAILABLE IN MALAYSIA Mohd Riduan Aizuddin Fahmi, Tamaldin Noreffendy, Mat Yamin Ahmad Kamal THE EFFECT OF FIBER LASER PARAMETERS ON MICROHARDNESS AND MICROSTRUCTURE OF DUPLEX STAINLESS STEEL Mohammed Ghusoon R., Ishak M., Aqida S. N., Abdulhadi Hassan A. IDENTIFICATION OF DAMAGE BASED ON FREQUENCY RESPONSE FUNCTION (FRF) DATA Sulaiman M. S. A., Yunus M. A., Bahari A. R., Abdul Rani M. N. FINITE ELEMENT SIMULATION OF TWIST FORMING PROCESS TO STUDY TWIST SPRINGBACK PATTERN Nashrudin M. N., Abdullah A. B. INFLUENCE OF REAR-ROOF SPOILER ON THE AERODYNAMIC PERFORMANCE OF HATCHBACK VEHICLE Cheng See-Yuan, Mansor Shuhaimi PREDICTION OF AVAILABLE POWER BEING GENERATE IN SMALL HYDROPOWER SYSTEM AT SUNGAI PERTING BENTONG PAHANG Razi M., Yusuff M.A., Tee B.T., Zakaria K.A. A REVIEW ON FAILURE CHARACTERISTICS OF POLYMER GEAR Md Ghazali Wafiuddin, Daing Idris Daing Mohamad Nafiz, Sofian Azizul Helmi, Siregar Januar Parlaungan, Abdul Aziz Ismail Ali THEORETICAL MODELLING OF A BEAM WITH ATTACHED SPRING-MASS-DAMPER SYSTEM Azmirul Mohd Rozlan Syaiful, Zaman Izzuddin, Manshoor Bukhari, Khalid Amir, Chan Shiau Wei, Mohd Sani Mohd Shahrir PREVALENCE OF DISTRACTED PEDESTRIANS WHILE CROSSING: A STUDY OF MALAYSIA S SITUATION Mohd Syazwan S., Baba Md. Deros, Nur Zarifah H., Aqbal Hafeez A., Noor Faradila P. EFFECT OF FIBER LASER PARAMETERS ON LASER WELDED AZ31B MAGNESIUM ALLOYS Mat Salleh Naqiuddin, Ishak Mahadzir, Rahman Romlay Fadhlur ASSESSING RETRO-REFLECTIVE MARKERS (RRMS) USAGE ON HEAVY VEHICLES WITH RESPECT TO MS 828: Mohd Amirudin M.R, Ahmad Noor Syukri Z.A, D-Wing Kak REAL TIME EMERGENCY AUTO PARKING SYSTEM IN DRIVER LETHARGIC STATE FOR ACCIDENT PREVENTING Alsibai Mohammed Hayyan, Kamarulzaman Syafiq Fauzi, Alfarra Hossam Adden, Naif Yasir Hashim MAGNETIC FLUX GRADIENT OBSERVATION DURING FATIGUE CRACK PROPAGATION: A CASE STUDY OF SAE 1045 CARBON STEEL USED FOR AUTOMOTIVE TRANSMISSION PARTS Ahmad S.R., Arifin A., Abdullah S., Mohamed S.A.N. INVESTIGATION OF EMISSIONS CHARACTERISTICS OF SECONDARY BUTYL ALCOHOL- GASOLINE BLENDS IN A PORT FUEL INJECTION SPARK IGNITION ENGINE Yusri I.M., Mamat Rizalman, Aziz A., Yusop A.F., Awad Omar I., Rosdi S.M. INVESTIGATING BENDING STRENGTH OF SPUR GEAR: A REVIEW Abdul Aziz Ismail Ali, Daing Idris Daing Mohamad Nafiz, Mohd Ghazali Wafiuddin

5 THE FUTURE OF END-OF-LIFE VEHICLES (ELV) IN MALAYSIA A FEASIBILITY STUDY AMONG CAR USERS IN KLANG VALLEY Mohd Jawi Zulhaidi, Md Isa Mohd Hafzi, Solah Mohd Syazwan, Ariffin Aqbal Hafeez, Shabadin Akmalia, Osman Mohd Rasid FINITE ELEMENT ANALYSIS OF HYBRID ENERGY HARVESTING OF PIEZOELECTRIC AND ELECTROMAGNETIC Muhammad Yazid Muhammad Ammar Faris, Jamil Norlida, Muhmed Razali Nik Nurul Husna, Yusoff Ahmad Razlan VEHICLE ACCELERATED CORROSION TEST PROCEDURES FOR AUTOMOTIVE IN MALAYSIA Anuar Liza, Amrin Astuty, Mohammad Roslina, Ourdjini Ali BIODIESEL UNSATURATION DEGREE EFFECTS ON DIESEL ENGINE NOX EMISSIONS AND COTTON WICK FLAME TEMPERATURE Abdullah Mohd Fareez Edzuan, Zhing Sim Shu, Bilong Bugik Clarence STUDY ON DIFFERENTIAL REGENERATIVE BRAKING TORQUE CONTROL TO INCREASE THE STABILITY OF THE SMALL ELECTRIC VEHICLE WITH FOUR IN-WHEEL MOTORS Ali N. M., Peeie M. H., Rasid M. A. H., Ogino H. STRUCTURAL DYNAMIC INVESTIGATION OF FRAME STRUCTURE WITH BOLTED JOINTS Izham M.H.N., Abdullah N.A.Z., Zahari S.N., Sani M.S.M. PERODUA MYVI ENGINE FUEL CONSUMPTION MAP AND FUEL ECONOMY VEHICLE SIMULATION ON THE DRIVE CYCLES BASED ON MALAYSIAN ROADS Ramdan Muhammad Iftishah SIMULATION MODEL FOR DIFFERENT BOLTED PRECOMBUSTION CHAMBER (PCC) FOR SPARK IGNITION ENGINE Muhamad Tajuddin Khairil Amri, Mohd Tahir Musthafah, Salim Mohd Azli, Mansor Muhd Ridzuan, Akop Mohd Zaid, Md. Saad Adzni NANOSTRUCTURE AND OXIDATION PROPERTIES INVESTIGATION OF ENGINE USING JATROPHA BIODIESEL AS ENGINE FUEL Abdul Latif Mohd Aznan, Yusof Ahmad Anas, Shukor Ahmad Zaki, Habidi Farah Aqilah, Mohd Nor Nur Fathiah, Akop Mohd Zaid, mohd Hanafi Mohd Hafidzal, Roslizar Aiman ANALYSIS OF RECONFIGURABLE ASSEMBLY SYSTEM FRAMING SYSTEMS IN AUTOMOTIVE INDUSTRY Md Zain Mohamad Zamri, Abdul Rani Ahmad Majdi, Abd Majid Mohd Amin LEAN MANUFACTURING IMPLEMENTATION IN REDUCING WASTE FOR ELECTRONIC ASSEMBLY LINE Zakaria Nurul Husna, Nik Mohamed Nik Mohd Zuki, Ab Rahid Mohd Fadzil Faisae, Mohd Rose Ahmad Nasser PREPARATION AND STABILITY OF SILICONE DIOXIDE DISPERSED IN POLYALKYLENE GLYCOL BASED NANOLUBRICANTS Sharif M.Z., Azmi W.H., Redhwan A.A.M., Zawawi N.M.M. DEVELOPMENT OF NANOLUBRICANT AUTOMOTIVE AIR CONDITIONING (AAC) TEST RIG Redhwan A.A.M., Azmi W.H., Sharif M.Z., Hagos Ftwi Y. THERMAL CONDUCTIVITY ENHANCEMENT OF AL 2 O 3 AND SIO 2 NANOLUBRICANTS FOR APPLICATION IN AUTOMOTIVE AIR CONDITIONING (AAC) SYSTEM Redhwan A.A.M., Azmi W.H., Sharif M.Z., Zawawi N.N.M. SIMULATION OF STORAGE PERFORMANCE ON HYDROPNEUMATIC DRIVELINE IN DUAL HYBRID HYDRAULIC PASSENGER CAR Wasbari Faizil, Abu Bakar Rosli, Gan Leong Ming, Yusof Ahmad Anas, Amat Jafar Zarina DIESEL ENGINE PERFORMANCE AND EXHAUST EMISSION ANALYSIS USING DIESEL- ORGANIC GERMANIUM FUEL BLEND Syafiq Zulkifli, Fahmi Othman, Syuhaida Nurul, Chen Ang F., Adam Abdullah THE EFFECT OF TAP WATER EMULSIFIED FUEL ON EXHAUST EMISSION OF SINGLE CYLINDER COMPRESSION IGNITION ENGINE Mazlan Nurul Aiyshah, Yahya Wira Jazair, Ithnin Ahmad Muhsin, Ahmad Mohamad Azrin METHODS OF PREPARING INTERNAL COMBUSTION ENGINE CYLINDER BORE SURFACES FOR FRICTIONAL IMPROVEMENT Chung Hwa Kong, Ramasamy D., Kadirgama K., Noor M. M., Rahman M. M., Samykano M. EXPLORING CYCLE CRASH CHARACTERISTICS IN MALAYSIA Hamzah A., Ariffin A. H., Solah M. S., Paiman N. F., Osman M. R. STUDY ON WASTE HEAT RECOVERY FROM EXHAUST GAS SPARK IGNITION (S.I.) ENGINE USING STEAM TURBINE MECHANISM Talib Kamarulhelmy, Herawan Safarudin G., Tahir Musthafah M., Putra Azma, Shamsudin Shamsul A.

6 DIMENSIONAL ACCURACY OF INTERNAL COOLING CHANNEL MADE BY SELECTIVE LASER MELTING (SLM) AND DIRECT METAL LASER SINTERING (DMLS) PROCESSES IN FABRICATION OF INTERNALLY COOLED CUTTING TOOLS Ghani S. A. C., Zakaria M. H., Harun W. S. W., Zaulkafilai Z. STABILITY BEHAVIOR OF NON-SURFACTANT WATER-IN-DIESEL EMULSION FUEL USING MICROSCOPIC OBSERVATION Norazni Siti Amiliyana, Yahya Wira Jazair, Ithnin Ahmad Muhsin, Abd Kadir Hasanuddin, Abd Razak Ili Fatimah, Bahar Nadia Dayana, Sugeng Dhani Avianto, Ramlan Nur Atiqah PLATOONING STRATEGY OF MOBILE ROBOT: SIMULATION AND EXPERIMENT Baarath K., Zakaria Muhammad Aizzat, Suparmaniam M.V., Abu Mohd Yazid bin MAGNETIC FIELD SIMULATION OF A THERMAL CONDUCTIVITY MEASUREMENT INSTRUMENT FOR MAGNETORHEOLOGICAL FLUID Rahim M.S.A., Ismail I., Wahid S.A., Aid S., Aqida S.N. AN INVESTIGATION ON THE SURFACE FINISH OF SCULPTURED SURFACE UTILIZING REVERSE ENGINEERING DATA OF CRANK CASE COVER (CATIA V5 & DELCAM) Azwan Sundi Syahrul, Syafik Jumali Muhammad, Razly Raffay Mohamad, Izamshah R.Abdullah R. ERGONOMIC STUDY ON HUMAN-POWERED VEHICLES Abdullah Mohd Azman, Abdul Rahman Mohamad Haziq, Azis Muhammad Zakwan, Shamsudin Shamsul Anuar, Ramli Faiz Redza, Sudin Mohd Nizam AN OVERVIEW OF THE OIL PALM EMPTY FRUIT BUNCH (OPEFB) POTENTIAL AS REINFORCING FIBRE IN POLYMER COMPOSITE FOR ENERGY ABSORPTION APPLICATIONS Faizi M.K., Shahriman A.B., Abdul Majid M.S., Shamsul B.M.T., Ng Y.G., Basah S.N., Cheng E.M., Afendi M., Zuradzman M.R., Wan Khairunizam, Hazry D. NUMERICAL STUDY ON DISSIMILAR GUIDE VANE DESIGN WITH SCC PISTON FOR AIR AND EMULSIFIED BIOFUEL MIXING IMPROVEMENT Hamid Mohd Fadzli, Idroas Mohamad Yosof, Basha Mohd Hafif, Sa ad Shukriwani, Che Mat Sharzali, Abdullah Muhammad Khalil, Zainal Alauddin Zainal Alimuddin PEDESTRIAN-MOTORCYCLE COLLISIONS: ASSOCIATED RISKS AND ISSUES Ariffin Aqbal Hafeez, Hamzah Azhar, Solah Mohd Syazwan, Paiman Noor Faradila, Mat Hussin Siti Fairos, Osman Mohd Rasid STEADY FLOW AND DYNAMIC ANALYSES COMPARISON OF AN AIR INTAKE BREATHING CAPACITY Mohamad Shafie Nur Adila, Muhamad Said Mohd Farid, Abdul Aziz Azhar, Abdul Latiff Zulkarnain, Mat Yamin Ahmad Kamal, Tamaldin Noreffendy THE EFFECT OF ORIFICE DIAMETER IN CONSTANT VOLUME CHAMBER TO SPRAY CHARACTERISTICS IN DIESEL ENGINE USING COMPUTATIONAL FLUID DYNAMIC Andsaler A. R., Khalid A., Abdullah N. S. A., Jaat N. AUTONOMOUS MOBILE ROBOT LOCALIZATION USING KALMAN FILTER Mohd Nasir Nabil Zhafri, Zakaria Muhammad Aizzat, Razali Saifudin, bin Abu Mohd Yazid EFFECT ON HUMAN METABOLIC RATE OF SKIN TEMPERATURE IN AN OFFICE OCCUPANT Abu Bakar Rosli, Jusoh Norfadzilah, Rasdan Ismail Ahmad, Zanariah Shamshir Ali Tanti NUMERICAL INVESTIGATION ON SOOT PARTICLES EMISSION IN COMPRESSION IGNITION DIESEL ENGINE BY USING PARTICULATE MIMIC SOOT MODEL Ibrahim Fadzli, Wan Mahmood Wan Mohd Faizal, Abdullah Shahrir, Abu Mansor Mohd Radzi INVESTIGATION OF PASSENGER CAR USING MACPHERSON STRUT FOR SUSPENSION SYSTEM PT.1: VEHICLE BEHAVIOUR VARIATION OF TIME RESPONSE Ali Tanti, Abu Bakar Rosli, Leong Meng Gan, Amat Jafar Zarina EFFECTS OF FRACTAL GRID ON EMISSIONS IN BURNER COMBUSTION BY USING FUEL- WATER-AIR PREMIX INJECTOR DERIVED FROM BIODIESEL CRUDE PALM OIL (CPO) BASE Suardi Mirnah, Khalid Amir, Razali Mohd Azahari, Sapit Azwan, Amirnordin Shahrin Hisham PREDICTING THE PERFORMANCES OF A CAMPRO ENGINE RETROFITTED WITH LIQUEFIED PETROLEUM GAS (LPG) SYSTEM USING 1-DIMENSIONAL SOFTWARE Kamaruddin M. Hazeem, Osman Shahrul Azmir, Fawzi Mas, Mustaffa Norrizal, Tukiman Mohd Mustaqim INVESTIGATING THE INFLUENCES OF LIQUID LPG INJECTION ON SPARK IGNITION (SI) ENGINE Tukiman Mohd Mustaqim, Mustaffa Norrizal, Fawzi Mas, Osman Shahrul Azmir EXPERIMENTAL STUDY ON THE EFFECT OF ALTERNATOR SPEED TO THE CAR CHARGING SYSTEM Mazlan Rozdman K., Dan Reduan M., Zakaria Mohd Z., Hamid Abdul H. A.

7 OMNIDIRECTIONAL CONFIGURATION AND CONTROL APPROACH ON MINI HEAVY LOADED FORKLIFT AUTONOMOUS GUIDED VEHICLE Adam Norsharimie, Aiman Mohd, Nafis Wan Mohd, Irawan Addie, Muaz Mohamad, Hafiz Mohamad, Razali Akhtar Razul, Sheikh Ali Sheikh Norhasmadi TRANSIENT MODELLING OF HEAT LOADING OF PHASE CHANGE MATERIAL FOR ENERGY STORAGE Asyraf W.M., Vasu Anusuiah, Hagos Ftwi Y., Noor M. M., Mamat Rizalman STUDY OF FUEL INLET TEMPERATURE VARIATIONS ON PALM BIODIESEL OPERATING WITH A DIESEL ENGINE Mat Yasin Mohd Hafizil, Mamat Rizalman, Yusop Ahmad Fitri, Ali Mohd Hafiz, Izzudin Mohamad Izuan INVESTIGATION OF DIESEL-ETHANOL BLENDED FUEL PROPERTIES WITH PALM METHYL ESTER AS CO-SOLVENT AND BLENDS ENHANCER Mat Taib Norhidayah, Abu Mansor Mohd Radzi, Wan Mahmood Wan Mohd Faizal, Ahmad Shah Fais, Nik Abdullah Nik Rosli Author Index