ISO: 16 V/mm (406.4 mv/mil) ± temperature range 0 to 45 C (+32 to +113 temperature range 0 to 45 C (+32 to +113 F)

Transcription

1 AMS EZ 1000 Specifications Sheet Eddy Current Sensor Non-contact sensor designed for critical turbomachinery applications such as steam, gas and hydro turbines, compressors, gearboxes, pumps and fans to measure radial and axial shaft dynamic displacement; position, eccentricity and speed. Performance 5mm Sensor Linear Measurement Range nitial Air Gap ncremental Scale Factor (SF) 1 mm (40 mils) 0.25 mm (10 mils) AP: 15,74 V/mm (399.8 mv/mil) ± 5% or SO: 16 V/mm (406.4 mv/mil) ± 5% Deviation from best fit straight line (DSL) Performance 8mm Sensor Linear Measurement Range nitial Air Gap ncremental Scale Factor temperature range 0 to 45 C (+32 to +113 F) ± mm (± 1 temperature range 0 to 45 C (+32 to +113 F) 2 mm (80 mils) 0.5 mm (20 mils) AP: 7.87 V/mm (199.9 mv/mil) ± 5% or SO: 8 V/mm (203.2 mv/mil) ± 5% Deviation from best fit straight line (DSL) Measuring Target Minimum Target temperature range 0 to 45 C (+32 to +113 F) ± mm (± 1 temperature range 0 to 45 C (+32 to +113 F) 2 mm (80 mils) Minimum Shaft Diameter 5mm Sensor: 20 mm (0.98 ) 8mm Sensor: 25 mm (0.79 ) Target Material (Ferromagnetic Steel) 42CrMo4 (AS/SAE 4140) P235S C35 (AS/SAE 1035) 34CrMo4 (AS/SAE 4337, 4340) 26NiCrMoV14 ST 37, S235JR X35CrMo17 Other (On Request)

2 Environmental, General Operating Temperature Range Sensor incl. 1m Cable: -35 to +180 C (-31 to 356 F) Differential Pressure & Sealing Material Cable & Connector: -35 to +150 C (-31 to 302 F) hpa (145 psi) between sensor tip and case. Sensors are sealed against oil leakage Sensor Tip (PEEK Polyether Ether Ketone), Case (Stainless Steel) Cable (FEP Fluorinated Ethylene Propylene), Weight(Sensor with 1m Cable) Connector (Brass, nickel-plated) Approx. 100 grams (3.53 oz) Compliance and Certifications CE 2014/30/EU 2014/34/EU 2014/65/EU ATEX EN : A11:2013 EN :2012 EN :2010 EC-Ext EC :2011 EC :2011 CSA Marine EC :2010 *PENDNG* *PENDNG* 2

3 Hazardous Area Approvals ntrinsic Safety (ia) ATEX / EC-Ex / CSA Area classification depends on converter, see converter documentation for details. Sensor temperature classification: T6: -35 C Ta 55 C T4: -35 C Ta 130 C T2: -35 C Ta 200 C Non-sparking (na) ATEX / EC-Ex / CSA Area classification depends on converter, see converter documentation for details. Sensor temperature classification: T6: -35 C Ta 55 C T4: -35 C Ta 130 C T2: -35 C Ta 200 C 3

4 Dimensions EZ1080-xx-xx-xxx & EZ1082-xx-xx-xxx EZ1081-xx-xx-xxx & EZ1083-xx-xx-xxx Ordering nformation Sensor Tip Diameter Case Threads Armored Cable Model No. 5mm M8x1 No EZ1050 EZ1051 8mm M10x1 No EZ1080 EZ1081 5mm ¼ -28 UNF No EZ1052 EZ1053 8mm 3/8-24 UNF No EZ1082 EZ1083 4

5 Model No. - Case Length XX - Unthreaded Length XX - Cable Length XXX EZ1050 EZ1051 EZ1080 EZ mm mm Order in increments of 10mm RM Reverse Mount Note: 20mm Case is only available with EZ1050 and EZ mm, No UTL 05 50mm mm Note: Remaining threaded Length must be either 50mm or 100mm Note: Maximum Case Length of 5mm Sensors is limited to 100mm. Note: Reverse Mount is only available with 8mm sensors m EZ1052 EZ in in in in, No UTL in in m m EZ1082 Order in increments of 0.5in RM Reverse Mount Note: Remaining threaded Length must be either 2.0in or 4.0in. EZ1083 Note: 0.8in Case is only available with EZ1052 and EZ1082. Note: Maximum Case Length of 5mm Sensors is limited to 4.0in. Note: Reverse Mount is only available with 8mm sensors. Example: EZ EZ 8mm, M10X1, NO ARMOR, 20MM SLEEVE, 0MM UNTHREADED, 5M CABLE 5

6 Ordering nformation Extension Cable Model No. Armored Cable X - EZ190 EZ190 0 No m m m m m m m Cable Length XXX Example: EZ EZ1000 EXTENSON CABLE, NO ARMOR, 4M CABLE Product Accessories Model Number MPT 064 Product Description Metal Protection Tube Emerson Reliability Solutions 835 nnovation Drive Knoxville, TN USA , Emerson. All rights reserved. The Emerson logo is a trademark and service mark of Emerson Electric Co. The AMS logo is a mark of one of the Emerson family of companies. All other marks are the property of their respective owners. The contents of this publication are presented for informational purposes only, and while diligent efforts were made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are governed by our terms and conditions, which are available on request. We reserve the right to modify or improve the designs or specifications of our products at any time without notice.