A79L05~A79L24. AiT Semiconductor Inc. ORDERING INFORMATION
|
|
|
- Austen Hicks
- 5 years ago
- Views:
Transcription
1 THREE TERMINAL NEGATIE OLTAGE REGULATOR DESCRIPTION Three-terminal negative voltage regulator. The is available in SOT89-3 Package. FEATURES main purposes the role of regulator and protection for a variety of electrical appliances, electronic equipment, regulator circuit Available in SOT89-3 Package ORDERING INFORMATION Package Type SOT89-3 SPQ: 1,000pcs/Reel Note Part Number A79LXXK3R K3 A79LXXK3R XX: Output oltage 05=5.0, 12=12 : Halogen free Package R: Tape & Reel AiT provides all RoHS products RE1.0 - AUG 2018 RELEASED
2 THREE TERMINAL NEGATIE OLTAGE REGULATOR PIN DESCRIPTION Top iew Pin # Symbol Function 1 GND Ground 2 IN Input 3 OUT Output RE1.0 - AUG 2018 RELEASED
3 THREE TERMINAL NEGATIE OLTAGE REGULATOR ABSOLUTE MAXIMUM RATINGS Operating temperature range applies unless otherwise specified I, Input oltage (TA=25 C) (A79L05~A79L15) (A79L18~A79L24) IO, Output Current 0.15A PD, Total Power Dissipation (TA=25 C) NOTE1 0.5W TOP, Work (Tube Shell) Temperature -40 C ~ +85 C TSTG, Storage Temperature -55 C ~ +150 C Stresses above may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the Electrical Characteristics is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. NOTE1: Devices installed in good thermal environment ELECTRICAL CHARACTERISTICS A79L05 0 TJ +125, I=-10, IO=40, CI=0.33μF, CO=0.1uF, unless otherwise specified Output oltage O TJ=25 C IO 40, -7 I I I Current Regulation SI TJ=25 C, 1 IO IQ TJ=25 C IO I Ripple Rejection Ratio Srip -8 I -18; f=120hz db RE1.0 - AUG 2018 RELEASED
4 THREE TERMINAL NEGATIE OLTAGE REGULATOR A79L06 0 TJ +125, I=-11, IO=40, CI=0.33μF, CO=0.1uF, unless otherwise specified Output oltage O TJ=25 C IO 40, -8.1 I I I Current Regulation SI TJ=25 C, 1 IO IQ TJ=25 C IO I Ripple Rejection Ratio Srip -9 I -19; f=120hz db A79L08 0 TJ +125, I=-14, IO=40, CI=0.33μF, CO=0.1uF, unless otherwise specified Output oltage O TJ=25 C IO 40, I I I Current Regulation SI TJ=25 C, 1 IO IQ TJ=25 C IO I Ripple Rejection Ratio Srip -12 I -23; f=120hz db A79L09 0 TJ +125, I=-15, IO=40, CI=0.33μF, CO=0.1uF, unless otherwise specified Output oltage O TJ=25 C IO 40, I I I Current Regulation SI TJ=25 C, 1 IO IQ TJ=25 C IO I Ripple Rejection Ratio Srip -12 I -24; f=120hz db RE1.0 - AUG 2018 RELEASED
5 THREE TERMINAL NEGATIE OLTAGE REGULATOR A79L10 0 TJ +125, I=-16, IO=40, CI=0.33μF, CO=0.1uF, unless otherwise specified Output oltage O TJ=25 C IO 40, I I I Current Regulation SI TJ=25 C, 1 IO IQ TJ=25 C IO I Ripple Rejection Ratio Srip -13 I -24; f=120hz db A79L12 0 TJ +125, I=-19, IO=40, CI=0.33μF, CO=0.1uF, unless otherwise specified Output oltage O TJ=25 C IO 40, I I I Current Regulation SI TJ=25 C, 1 IO IQ TJ=25 C IO I Ripple Rejection Ratio Srip -15 I -25; f=120hz db A79L15 0 TJ +125, I=-23, IO=40, CI=0.33μF, CO=0.1uF, unless otherwise specified Output oltage O TJ=25 C IO 40, I I I Current Regulation SI TJ=25 C, 1 IO IQ TJ=25 C IO I Ripple Rejection Ratio Srip I -28.5; f=120hz db RE1.0 - AUG 2018 RELEASED
6 THREE TERMINAL NEGATIE OLTAGE REGULATOR A79L18 0 TJ +125, I=-27, IO=40, CI=0.33μF, CO=0.1uF, unless otherwise specified Output oltage O TJ=25 C IO 40, I I I Current Regulation SI TJ=25 C, 1 IO IQ TJ=25 C IO I Ripple Rejection Ratio Srip -23 I -33; f=120hz db A79L20 0 TJ +125, I=-29, IO=40, CI=0.33μF, CO=0.1uF, unless otherwise specified Output oltage O TJ=25 C IO 40, I I I Current Regulation SI TJ=25 C, 1 IO IQ TJ=25 C IO I Ripple Rejection Ratio Srip -27 I -35; f=120hz db A79L24 0 TJ +125, I=-33, IO=40, CI=0.33μF, CO=0.1uF, unless otherwise specified Output oltage O TJ=25 C IO 40, -27 I I I Current Regulation SI TJ=25 C, 1 IO IQ TJ=25 C IO I Ripple Rejection Ratio Srip -29 I -35; f=120hz db RE1.0 - AUG 2018 RELEASED
7 THREE TERMINAL NEGATIE OLTAGE REGULATOR TYPICAL CHARACTERISTICS 1. Dissipation of Power and Temperature Curves 2. The Curve of The Output oltage and Junction Temperature RE1.0 - AUG 2018 RELEASED
8 THREE TERMINAL NEGATIE OLTAGE REGULATOR PACKAGE INFORMATION Dimension in SOT89-3 (Unit: mm) Symbol Min Max A 1.5 TYP. b b b2 1.6 TYP. c D 4.5 TYP. E e 1.5 TYP. e1 3 TYP. HE L LE α - 10 RE1.0 - AUG 2018 RELEASED
9 THREE TERMINAL NEGATIE OLTAGE REGULATOR IMPORTANT NOTICE AiT Semiconductor Inc. (AiT) reserves the right to make changes to any its product, specifications, to discontinue any integrated circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. AiT Semiconductor Inc.'s integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in life support applications, devices or systems or other critical applications. Use of AiT products in such applications is understood to be fully at the risk of the customer. As used herein may involve potential risks of death, personal injury, or server property, or environmental damage. In order to minimize risks associated with the customer's applications, the customer should provide adequate design and operating safeguards. AiT Semiconductor Inc. assumes to no liability to customer product design or application support. AiT warrants the performance of its products of the specifications applicable at the time of sale. RE1.0 - AUG 2018 RELEASED
A4004 BATTERY MANAGEMENT ONE CELL LITHIUM-ION/POLYMER BATTERY PROTECTION IC
DESCRIPTION The series product is a high integration solution for lithium-ion/polymer battery protection. contains advanced power MOSFET, high-accuracy voltage detection circuits and delay circuits. is
A4063. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The is a 2A Li-Ion battery switching charger intended for 5V adapters. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the
TO-220. Symbol Description Max Units VIN Input Voltage 15 V IOUT DC Output Current PD/(VIN-VO) ma. -40 to 125 (* in case of IL
TECHNICAL DATA 1.0A Low Dropout Positive Voltage Regulator IL1117-xx The IL1117 is a series of low dropout voltage regulators which can provide up to 1A of output current. The IL1117 is available in eight
KA317M. 3-Terminal 0.5A Positive Adjustable Regulator. Features. Description. Internal Block Diagram.
www.fairchildsemi.com 3-Terminal 0.5A Positive Adjustable Regulator Features Output Current in Excess of 0.5A Output Adjustable Between 1.2V and 37V Internal Thermal Overload Protection Internal Short
A4059. AiT Semiconductor Inc. Available in PSOP8 Package APPLICATION ORDERING INFORMATION
STANDALONE LINEAR LI-ION BATTERY CHARGER WITH THERMAL REGULATION DESCRIPTION The is charging management circuit that can be programmed through an external resistor constant current / constant voltage charging.
IL1117C-xxLow Dropout Positive Voltage Regulator TECHNICAL DATA
IL1117C-xxLow Dropout Positive Voltage Regulator TECHNICAL DATA Description The IL1117C is a series of low dropout voltage regulators which can provide up to 1A of output current. The IL1117C is available
KA78R05. Low Dropout Voltage Regulator. Features. Description. Internal Block Diagram.
KA78R5 Low Dropout Voltage Regulator www.fairchildsemi.com Features 1A / 5V Output low dropout voltage regulator TO Full-Mold package (PIN) Overcurrent protection, Thermal shutdown Overvoltage protection,
ADV AD A 150kHz 40V Buck DC/DC Converter With Constant Current Loop. General Description. Features. Applications
2A 150kHz 40V Buck DC/DC Converter With Constant Current Loop General Description The is a 150KHz fixed frequency PWM buck (step-down) DC/DC converter, capable of driving a 2A load with high efficiency,
FIXED VOLTAGE REGULATOR
3-TERMINAL 1A POSITIVE VOLTAGE REGULATORS FEATURES Output current in excess of 1A No external components required Internal short circuit current limiting Output Voltage of 5V, 6V, 8V, 9V, 10V, 12V, 15V,
KA78R05. Low Dropout Voltage Regulator. Features. Description. Internal Block Diagram.
KA78R5 Low Dropout Voltage Regulator www.fairchildsemi.com Features 1A / 5V Output low dropout voltage regulator TO22 Full-Mold package (PIN) Overcurrent protection, Thermal shutdown Overvoltage protection,
SA278RXX 2A LDO VOLTAGE REGULATOR. HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV: Page 1 of 16 DESCRIPTION
2A LDO VOLTAGE REGULATOR DESCRIPTION The is a positive low voltage dropout regulator, and voltage dropout is below 0.5V at 2A. The provides two versions: fixed and adjustable versions. The is available
IL1117-xx. 1.0A Low Dropout Positive Voltage Regulator TECHNICAL DATA. Features. Applications. Absolute Maximum Ratings. Rev. 02
TECHNICAL DATA 1.0A Low Dropout Positive Voltage Regulator IL1117-xx The IL1117 is a series of low dropout voltage regulators which can provide up to 1A of output current. The IL1117 is available in eight
AMS1117 1A Adjustable / Fixed Low Dropout Linear Regulator
1A Adjustable / Fixed Low Dropout Linear Regulator Description The is a series of low dropout voltage regulators which can provide up to 1A of output current. The is available in six fixed voltage, 1.2,
DUAL POSITIVE/NEGATIVE, 3 AMP, LOW DROPOUT FIXED VOLTAGE REGULATORS
MILPRF8 CERTIFIED M.S.KENNEDY CORP. 707 Dey Road Liverpool, N.Y. 088 DUAL POSITIVE/NEGATIVE, AMP, LOW DROPOUT FIXED VOLTAGE REGULATORS 000 SERIES () 706 FEATURES: Dual Low Dropout Voltage Internal Short
KA278RXXC-Series. 2A Output Low Dropout Voltage Regulators. Features. Description. Internal Block Diagram.
KA7RXXC-Series A Output Low Dropout Voltage Regulators www.fairchildsemi.com Features KA7RXXC-series (//).V, V, V output low dropout voltage regulator TO- full-mold package (pin) Overcurrent protection,
NC7SP17 TinyLogic ULP Single Buffer with Schmitt Trigger Input
NC7SP17 TinyLogic ULP Single Buffer with Schmitt Trigger Input Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/Os at CC from 0.9 to 3.6 Propagation Delay (t PD ): 4.0ns Typical for 3.0
UNISONIC TECHNOLOGIES CO., LTD UC5301
UNISONIC TECHNOLOGIES CO., LTD UC5301 SWITCHED-CAPACITOR VOLTAGE INVERTERS DESCRIPTION The UTC UC5301 is an unregulated charge-pump voltage inverter. It can be used to generate a negative supply from positive
KA278RXXC-Series. 2A Output Low Dropout Voltage Regulators. Description. Features. Internal Block Diagram.
KA7RXXC-Series A Output Low Dropout Voltage Regulators www.fairchildsemi.com Features KA7RXXC-series (//1/9/1) A/.V, V,.1V, 9V, 1V output low dropout voltage regulator TO- full-mold package (pin) Overcurrent
The LD2940 is a low dropout three-terminal regulator with a typical dropout of 280mV at 1A output current.
1A Ultra Low Dropout Voltage Regulator 1A Ultra Low Dropout Voltage Regulator General Description The LD2940 is a low dropout three-terminal regulator with a typical dropout of 280mV at 1A output current.
GM1117 GM1117V1.01. Features. Description. Application. Typical Application Circuits 1A LOW DROPOUT PRECISION VOLTAGE REGULATOR
Description The is a positive low dropout regulator and is available in an adjustable version and fixed output voltage from 1.5V to 5.0V. All internal circuitry is designed to operate down to 800mV input
Advanced Power Electronics Corp.
300mA Low Dropout Linear Regulator with Shutdown Description The is a low dropout, positive linear regu lator with very low quiescent current. The can supply 300mA output current with low dropout voltage
MS868C10. Schottky Barrier Diode. Maximum Rating and Characteristics. FUJI Diode
MS868C Schottky Barrier Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25 C unless otherwise specified.) Item Symbols Conditions Ratings Units Repetitive peak surge reverse voltage VRSM
FDRW40C120J(1200V, 40A)
FDRW40C20J(200V, 40A) Soft Recovery FRD Series Maximum Rating and Characteristics Maximum Ratings (at Ta=25 C unless otherwise specified.) Item Symbol Conditions Ratings Units Repetitive peak reverse voltage
NC7SV08 TinyLogic ULP-A 2-Input AND Gate
NC7S08 TinyLogic ULP-A 2-Input AND Gate Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/Os at CC from 0.9 to 3.6 Extremely High Speed t PD - 1.0 ns: Typical for 2.7 to 3.6 CC - 1.2 ns:
ESAD83M-004RR. Schottky Barrier Diode. Maximum Rating and Characteristics. FUJI Diode
ESAD83M-004RR Schottky Barrier Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25 C unless otherwise specified.) Item Symbols Conditions Ratings Units Repetitive peak surge reverse voltage
3-TERMINAL ADJUSTABLE REGULATOR LM317L
3-TERMINAL ADJUSTABLE REGULATOR DESCRIPTION Outline Drawing The is an adjustable 3-terminal positive voltage regulator capable of supplying 100mA over a 1.2V to 37V output range. It is exceptionally easy
NC7SV126 TinyLogic ULP-A Buffer with Three-State Output
NC7S126 TinyLogic ULP-A Buffer with Three-State Output Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/O s at CC from 0.9 to 3.6 Extremely High Speed tpd - 1.0 ns: Typical for 2.7 to
NC7SV126 TinyLogic ULP-A Buffer with Three-State Output
NC7S126 TinyLogic ULP-A Buffer with Three-State Output Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/O s at CC from 0.9 to 3.6 Extremely High Speed tpd - 1.0ns: Typical for 2.7 to
DV2043S7. Level 2 Smart Charger With Dual-Battery Selector. Product Brief. Features. General Description
Product Brief DV04S7 Level Smart Charger With Dual-Battery Selector Features Level Smart Charger evaluation and development board with Dual-Battery Selector Supports System Management Bus specification
Low Power, Low Dropout, 250mA, RF - Linear Regulators
Preliminary Datasheet GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input and deliver up to 25mA. They are the perfect choice
Is Now Part of To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC
Maintenance/ Discontinued
Micromotor Forward/Reverse Electronic Governors verview The and the S are the electronic governors capable of controlling the forward/reverse speed, fast forward, rewind, and start stop of the micromotors
NC7SVL08 TinyLogic Low-I CCT Two-Input AND Gate
NC7SL08 TinyLogic Low-I CCT Two-Input ND Gate Features 0.9 to 3.6 CC Supply Operation 3.6 Over-oltage Tolerant I/Os at CC from 0.9 to 3.6 Power-Off High-Impedance Inputs and Outputs Proprietary Quiet Series
SPECIFICATION VOLTAGE REGULATOR PQ200WNA1ZPH
SPEC. No. ED-04Q048 ISSUE March 30, 2005 OPTO-ELECTRONIC DEVICES DIVISION ELECTRONIC COMPONENTS GROUP SHARP CORPORATION SPECIFICATION DEVICE SPECIFICATION FOR VOLTAGE REGULATOR MODEL No. PQ200WNA1ZPH Specified
FEATURES. Charging. - High Voltage Chemistry Support: up to 4.35V. Others
HM5B GENERAL DESCRIPTION The HM5B series of devices are highly integrated Li-Ion and Li-Pol linear chargers targeted at small capacity battery for portable applications. It is a complete constant-current/
Item Symbols Conditions Ratings Units Repetitive peak reverse voltage VRRM V Isolating voltage Viso Terminals-to-case, AC.
YG982S6R Low-Loss Fast Recovery Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25 C unless otherwise specified.) Item Symbols Conditions Ratings Units Repetitive peak reverse voltage VRRM
China - Germany - Korea - Singapore - United States - smc-diodes.com
Description: The SLR1117A is a low dropout, three terminals regulator designed to provide output current up to 1A. The device is available in an adjustable version and fixed output voltage of 1.8V, 2.5V
300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator
2 GND Preliminary Datasheet 300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator General Description The is designed for portable RF and wireless applications with demanding performance and
DV2003L1. Fast Charge Development System. Control of On-Board Linear Current Regulator or External Current Source. Features. Connection Descriptions
DV00L Fast Charge Development System Control of On-Board Linear Current Regulator or External Current Source Features bq00 fast-charge control evaluation and development Charge current sourced from an
Advanced Monolithic Systems
Advanced Monolithic Systems FEATURES Adjustable or Fixed Output 1.5, 2.5, 2.85, 3.0, 3.3, 3.5 and 5.0 Output Current of 10A Low Dropout, 500m at 10A Output Current Fast Transient Response Remote Sense
SPHV-C Series 200W Discrete Bidirectional TVS Diode
SPHV-C Series W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SPHV-C series is designed to replace multilayer varistors (MLVs) in portable applications, LED lighting modules, and low speed
5A LOW DROPOUT POSITIVE REGULATOR
5A LOW DROPOUT POSITIVE REGULATOR Features Output Current : 5A Maximum Input Voltage : 12V Adjustable Output Voltage or Fixed 1.8V, 3.3V, 5.0V Current Limiting and Thermal Protection Standard 3Pin Power
Output Current. Output Unit. Feature Set i 6A A 033 V R TDK- Lambda Dallas Technical Center. 14 Amps 3.3V Single
Ordering information Product Identifier Platform Input Voltage Current Unit Range # of Feature Set i 6A 24 014 A 033 V 001 -R TDK- Lambda Dallas Technical Center Option Table Feature Set 33.0 x 22.9mm
Ag Features. Multi-Stage Charging. Solar Panel or DC Input. Maximum Power Point Tracking (MPPT) Very Low Power Consumption
Datasheet Ag103 Intelligent Sealed Lead Acid Solar Battery Charger Module Pb 1 Features Multi-Stage Charging Solar Panel or DC Input Maximum Power Point Tracking (MPPT) Very Low Power Consumption Wide
ATN3580 Series: Fixed Attenuator Pads
DATA SHEET ATN3580 Series: Fixed Attenuator Pads Applications Attenuators Features Specified flat response to 40 GHz Return loss > 15 db Available at 1-10, 12, 15, 20, 30, and 40 db Power handling to 1
TA78DL05S,TA78DL06S,TA78DL08S,TA78DL09S, TA78DL10S,TA78DL12S,TA78DL15S
TOSHIBA Bipolar Linear Integrated Silicon Monolithic TA78DL05,06,08,09,10,12,15S TA78DL05S,TA78DL06S,TA78DL08S,TA78DL09S, TA78DL10S,TA78DL12S,TA78DL15S 5, 6, 8, 9, 10, 12, 15 Three-Terminal Low Dropout
Silvertel. Ag5500. PoE Ultra Module. 1. Features. 2. Description. Maximum 60 Watt Output Power. Small size (½ Brick) High efficiency DC/DC converter
Silvertel V.4 Aug 04 Datasheet. Features Maximum 0 Watt Output Power Small size (½ Brick) High efficiency DC/DC converter Wide adjustable output voltage range 500V isolation (input to output) Input voltage
2 to 5 Serial Cell Li-ion Battery Protection IC for Secondary Protection
Series 2 to 5 Serial Cell Li-ion Battery Protection IC for Secondary Protection OERIEW The R5640G is an overcharge protection IC for 2- to 5- series cell Li-ion / Li-polymer rechargeable battery pack,
Ultra Low Dropout Positive Adjustable Linear Regulator Hermetic Package + 3.3Vin at 3.0A
PD-94469A Ultra Low Dropout Positive OM8504SC Adjustable Linear Regulator OM8504SF Hermetic Package + 3.3Vin at 3.0A Product Summary Part Number Dropout IO Vin Package OM8504SC 0.4 V 3.0A 3.3V MO-078AA
AT1084 5A Low Dropout Positive Voltage Regulator
FEATURES DESCRIPTION Three-Terminal Adjustable or Fixed Output Output Current of 5A Low Dropout 1.3V at 5A Output Current Line Regulation: 0.04% Load Regulation: 0.2% Fast Transient Response OCP & OTP
XC62FJ Series GENERAL DESCRIPTION APPLICATIONS. FEATURES Maximum Output Current : 200mA TYPICAL PERFORMANCE CHARACTERISTICS
ETR03086-001 10V Input, 200mA Low Consumption Current Regulator GENERAL DESCRIPTION The XC62FJ series is a highly precise, low power consumption, positive voltage regulator manufactured with CMOS and laser
DT V 800mA Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION
GENERAL DESCRIPTION The DT7102 is a highly integrated 5V 800mA Li-ion battery linear charging management device with standby indicator output. The DT7102 charges a battery in three phases: trickle charging,
Features. Low Dropout Voltage Load regulation:0.5% Max current. The AMS1117 is available in six fixed
Description Features The AMS7 is a series of low dropout voltage regulators which can provide up to A of output Low Dropout Voltage Load regulation:0.5% Max current. The AMS7 is available in six fixed
MHz Filter
Applications Broadband tuners DOCSIS 3.0 gateways DOCSIS 3.0 cable modems SMP12D 3.00 x 3.00 x 1.22 mm Product Features Usable bandwidth 100 MHz High attenuation Balanced operation Small Size: 3.00 x 3.00
RoHS COMPLIANT MGF4851A is a RoHS compliant product. RoHS compliance is indicated by the letter G after the Lot Marking.
DESCRIPTION The power InGaAs HEMT (High Electron Mobility Transistor) is designed for use in S to K band amplifiers. The lead-less ceramic package assures minimum parasitic losses. FEATURES High gain and
Silvertel. Ag5510. PoE Ultra Module. 1. Features. 2. Description. 60 Watt Output Power. Very small size. High efficiency DC/DC converter
V1.1 August 2016 Datasheet Silvertel 1. Features 60 Watt Output Power Very small size High efficiency DC/DC converter Wide adjustable output voltage range 1500V isolation (input to output) Input voltage
Is Now Part of. To learn more about ON Semiconductor, please visit our website at
Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
LM ma Low Dropout Regulator
500 ma Low Dropout Regulator General Description The LM2937 is a positive voltage regulator capable of supplying up to 500 ma of load current. The use of a PNP power transistor provides a low dropout voltage
Intel Enpirion Power Solutions Tape and Reel, and Tray Packaging Information
2017 Intel Corporation. All rights reserved. Intel, the Intel logo, Altera, Enpirion, and the Enpirion logo are trademarks of Intel Corporation in the US and/or other countries. Other marks and brands
Silver T E L E C O M. 1. Features. 2. Description. IEEE802.3af compliant. Small SIL package size - 56mm (L) x 14mm (H) Low output ripple and noise
Silver T E L E C O M V2.0 Aug 2008 Pb. Features IEEE802.3af compliant Small SIL package size - 56mm (L) x 4mm (H) Low output ripple and noise Input voltage range 36V to 57V Only one low cost external decoupling
YA875C10R (100V, 20A)
YA875C10R (100V, 20A) Ultra Low IR Schottky Barrier Diode Features Ultra Low IR Low VF Tj MAX = 175 C High reliability at higher temperatures Outline Drawings [mm] Connection diagram TO-220AB YA875C10
CE3211 Series. Standalone 1A Linear Lithium Battery Charger With Thermal Regulation INTRODUCTION: FEATURES: APPLICATIONS:
Standalone 1A Linear Lithium Battery Charger With Thermal Regulation INTRODUCTION: The CE3211 is a complete constant-current/ constant-voltage linear charger for single cell lithium rechargeable battery.
POLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description
2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
RoHS COMPLIANT MGF4941CL is a RoHS compliant product. RoHS compliance is indicated by the letter G after the Lot Marking.
< Low Noise GaAs HEMT > DESCRIPTION The super-low noise InGaAs HEMT (High Electron Mobility Transistor) is designed for use in K band amplifiers. The is designed for automotive application and AEC-Q101
MS52XX SMD Pressure Sensor
1, and 12 bar absolute pressure range Uncompensated Piezoresistive silicon micromachined sensor Surface mount 7.6 x 7.6 mm Low-noise, high-sensitivity, high-linearity DESCRIPTION The MS52XX SMD pressure
HP420X. 5A, High Efficiency POL Module GENERAL DESCRIPTION: FEATURES: APPLICATIONS: TYPICAL APPLICATION CIRCUIT & PACKAGE SIZE:
FEATURES: High Power Density Power Module 5A Maximum Load Input Voltage Range from 9.0V to 40.0V Output Voltage Range from 1.0V to 5.0V Excellent Thermal Performance 94% Peak Efficiency Enable Function
Features. V max (Vdc) I max (A) typ. (W) P d
2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free
CE3152 Series. Standalone Linear LiFePO4 battery charger with Thermal Regulation INTRODUCTION: FEATURES: APPLICATIONS: PIN CONFIGURATION:
Standalone Linear LiFePO battery charger with Thermal Regulation Series INTRODUCTION: The is a complete constantcurrent constantvoltage linear charger for single cell LiFePO batteries. It s SOT package
RoHS COMPLIANT MGF4935AM is a RoHS compliant product. RoHS compliance is indicated by the letter G after the Lot Marking.
DESCRIPTION The super-low noise InGaAs HEMT (High Electron Mobility Transistor) is designed for use in S to Ku band amplifiers. The is small-thin size, and offers high cost performance. FEATURES Low noise
XC6190 Series. FEATURES Input Voltage Range : 1.75V ~ 6.0V Low power Consumption : 0.01μA (Stand-by, TYP.) APPLICATIONS TYPICAL APPLICATION CIRCUIT
ETR02031-003 Push Button Reboot Controller GENERAL DESCRIPTION The XC6190 series are timer reset ICs that supply a reboot signal to the system when L voltage is input into the SW1, SW2 pins for a set time
DIO5518D 300mA,Single Li-ion Battery Charger
300mA,Single Li-ion Battery Charger Rev.0 Features Programmable Charge Current Up to 300mA Over-Temperature Protection Under oltage Lockout Protection Over oltage Lockout Protection Reverse current protection
Maintenance/ Discontinued
Servo Interface IC for DAT Overview The is an IC with servo interface function. Features Cylinder FG waveform processing Capstan FG waveform processing Reel FG waveform processing PG signal processing
RoHS COMPLIANT MGF4953B is a RoHS compliant product. RoHS compliance is indicated by the letter G after the Lot Marking.
DESCRIPTION The super-low noise InGaAs HEMT (High Electron Mobility Transistor) is designed for use in K band amplifiers. The lead-less ceramic package assures minimum parasitic losses. FEATURES Low noise
Silvertel. Ag Features. 2 Description. Power-over-Ethernet Plus Module. IEEE802.3at and IEEE802.3af compliant. Maximum 30W peak output power
Silvertel V.3 April 207 Datasheet Pb Features IEEE802.3at and IEEE802.3af compliant Maximum 30W peak output power Small Single In-Line (SIL) package size 57.3mm (L) x 4mm (H) Overload, short-circuit and
15-22/R6G6C-A32/2T SMD B
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi -color type. Pb-free. The product itself
Silvertel. Ag Features. 2. Description. Power-Over-Ethernet Module for CCTV. IEEE802.3af compliant
Silvertel V2.4 August 202 Datasheet Pb. Features IEEE802.3af compliant Standard CCTV package sizes - 38mm x 38mm x 6mm (H) or 42mm x 42mm x 6mm (H) Low cost Input voltage range 36V to 57V Input diode bridges
1.0A Low Dropout Positive Voltage Regulator
1.A Low Dropout Positive Voltage Regulator DESCRIPTION The is a series of low dropout voltage regulators which can provide up to 1A of output current. The is available in four fixed voltage, 1.2V,1.8V,
Silvertel. Ag Features. 2 Description. Power-Over-Ethernet Module. IEEE802.3af compliant. Small SIL package size - 56mm (L) x 14mm (H) Low cost
Silvertel V2.5 Feb 2014 Datasheet Pb 1 Features IEEE802.3af compliant Small SIL package size - 56mm (L) x 14mm (H) Low cost Input voltage range 36V to 57V Minimal (low cost) external components required
Features. Samples. I max (A) P d. typ. (W)
0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
SM Series 400W TVS Diode Array
General Purpose ESD Protection - SM5 through SM3 SM Series W TVS Diode Array RoHS Pb GREEN Description The SM series TVS Diode Array is designed to protect sensitive equipment from damage due to electrostatic
23-23B/R6GHBHC-A01/2A
Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-free. The product itself
Table 2 Models BST12M-0.7S03PDM BST12M-0.7S06PDM BST12M-0.7S10PDM Conditions Input voltage range
Information The BSTM series is a small, thin, highly efficient and low noise non-isolated type step down DC-DC converter with input that has been developed for distributed feeding. Output voltage is adjustable
3Phase spindle motor driver for CD-RW
otor driver ICs BD6670F 3Phase spindle motor driver for CD-RW BD6670F BD6670F is a 3-phase spindle motor driver adopting 180 PW direct driving system. Noise occurred from the motor driver when the disc
LV8804FV. Fan Motor Driver. Overview The LV8804FV is a motor driver for PC and server fans. Feature Direct PWM 3-phase sensorless motor driver
Ordering number : ENA1441C LV8804FV Bi-CMOS LSI PC and Server Fan Motor Driver http://onsemi.com Overview The LV8804FV is a motor driver for PC and server fans. Feature Direct PWM 3-phase sensorless motor
DT V 1A Standalone Linear Li-ion Battery Charger FEATURES GENERAL DESCRIPTION APPLICATIONS ORDER INFORMATION
GENERAL DESCRIPTION The DT7115 is a highly integrated 5V 1A Li-ion battery linear charging management device. The DT7115 charges a battery in three phases: trickle charging, constant current, and constant
DATA SHEET: InGaN White : DDW-UJG. With the intense colors that seem to glow with energy and its significant brightness, DomiLED TM
DATA SHEET: DomiLED DomiLED With the intense colors that seem to glow with energy and its significant brightness, DomiLED white LED is a highly reliable design device. Its dynamic nature makes it perfect
SM24CANB Series 500W TVS Diode Array
SM4CANB Series 5W TVS Diode Array RoHS Pb GREEN Description The SM4CANB TVS Diode Array is designed to protect automotive Controller Area Network (CAN lines from damage due to electrostatic discharge (ESD,
1W, 10V - 200V Surface Mount Silicon Zener Diode
1W, 10V - 200V Surface Mount Silicon Zener Diode FEATURES Photo Glass passivated junction Ideal for automated placement Low inductance Typical IR less than 1μA above 11V Compliant to RoHS Directive 2011/65/EU
3A L.D.O. VOLTAGE REGULATOR (Adjustable & Fixed)
FEATURES Output Current of 3A Fast Transient Response 0.04% Line Regulation 0.2% Load Regulation Internal Thermal and Current Limiting Adjustable or Fixed Output oltage(1.5, 1.8, 2.5, 3.3, 5.0) Surface
AQxxC Series 450W Discrete Bidirectional TVS Diode
AQxxC Series 5W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The bidirectional AQxxC series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
SPECIFICATION FOR White LED Light Engine
SPECIFICATION FOR White LED Light Engine where CL is CL(Converterless power); 78(rectangle in mm); D(Down light); C(120V); 37(Watt); W(white); 8(CRI 80); XX(CCT) High brightness with long lifetime High
VI Chip BCM Bus Converter Thermal Management
APPLICATION NOTE AN: VI Chip BCM Bus Converter Thermal Management Joe Aguilar Product Line Engineer, VI Chip & Paul Yeaman Principal Product Line Engineer, VI Chip Strategic Accounts Contents Page Introduction
Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)
1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals
Silvertel. Ag9912M Ultra Miniature PoE Module. 1. Features. 2. Description. Tiny SMT package (14mm x 21mm) IEEE802.3af compliant.
Silvertel V1.1 September 2016 Datasheet Ultra Miniature PoE Module Pb 1. Features Tiny SMT package (14mm x 21mm) IEEE802.3af compliant Low cost Input voltage range 36V to 57V Minimal external components
HIGH BRIGHTNESS LED LIGHT BAR PRELIMINARY SPEC. Features. Package Dimensions
HIGH BRIGHTNESS LED LIGHT BAR PRELIMINARY SPEC Part Number: KASL-4805QB24S/7 Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Dimension: 48mm X 5mm X 1.6mm.
ACE4108 Max.2A Li-ion Switching Charger IC
Description The ACE4108 is a 2A Li-Ion battery switching charger intended for 12V. Low power dissipation, an internal MOSFET and its compact package with minimum external components requirement makes the
Surface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)
1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free
2.5X2.0mm SURFACE MOUNT LED LAMP. PRELIMINARY SPEC Part Number: KT-2520SE9ZS-RV Reddish-Orange. Typical Applications. Features. Package Dimensions
2.5X2.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Part Number: KT-2520SE9ZS-RV Reddish-Orange Features Dimension: 2.5mmx 2.0mm x 0.8mm. Low thermal resistance. Ceramic package with silicone resin. Small
K3020P/ K3020PG Series
Optocoupler, Phototriac Output, 400 V V DRM K3020P/ K3020PG Series Features Isolation materials according to UL 94-VO Pollution degree 2 (DIN/VDE 0110 resp. IEC 60664) Climatic classification 55/100/21
BZX55C2V4~BZX55C75 AXIAL LEAD ZENER DIODES FEATURES MECHANICAL DATA. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TJ =25 C unless otherwise noted)
AXIAL LEAD ZENER DIODES VOLTAGE 2.4 to 75 Volts POWER 500 mwatts FEATURES Planar Die construction 500mW Power Dissipation Ideally Suited for Automated Assembly Processes Lead free in compliance with EU