FIXED VOLTAGE REGULATOR
|
|
|
- Lorraine Hodge
- 6 years ago
- Views:
Transcription
1 3-TERMINAL 1A POSITIVE VOLTAGE REGULATORS FEATURES Output current in excess of 1A No external components required Internal short circuit current limiting Output Voltage of 5V, 6V, 8V, 9V, 10V, 12V, 15V, 18V, 24V Internal thermal overload protection Output transistor safe-area compensation Output voltage offered in 4% tolerance Moisture Sensitivity Level 3 DESCRIPTION TO-220 PKG 1 3 TO-252 PKG Input 2. Gnd 3. Output LM78XX Heatsink surface connected The LM78XX series of three-terminal positive regulators, ORDERING INFORMATION - fixed output voltage and TO-220/TO-252 package - are DEVICE MARKING PACKAGE designed for a wide range of applications. LM78XXT LM78XX TO-220 These applications include on-card regulation for elimination LM78XXRS LM78XX TO-252 of noise and distribution problems associated with single XX = Output Voltage 5V, 6V, 8V, 9V, 10V, point regulation. In addition, they can be used with 12V, 15V, 18V, 24V power pass elements to make high current voltage regulators. If adequate heat sinking is provided, each of these regulators can deliver up to 1A of output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents. TYPICAL APPLICATIONS : ⑴ To specify an output voltage, substitute voltage value for "XX" ⑵ CI is required if regulator is located in appreciable distance from power supply filter. ⑶ Co improves stability and transient response Rev
2 LM78XX BLOCK DIAGRAM ABSOLUTE MAXIMUM RATINGS Characteristic Device Symbol Value Unit Input Voltage LM7805 ~ LM7818 LM7824 VI V Operating junction temperature Topr Storage temperature Tstg
3 LM7805 LM7805 ELECTRICAL CHARACTERISTICS (Refer to test circuit, TMIN<TJ<TMAX, Io=500 ma, VI=10V, CI=0.33 μf, Co=0.1 μf, unless otherwise specified) Output Voltage Vo 5.0mA Io 1.0A, PD 15W V VI=7V to 20V Line Regulation Vo Vo=7V to 25V mv VI=8V to 12V Load Regulation Vo Io=5.0mA to 1.5A mv Io=250 ma to 750 ma 4 50 Quiescent Current Change IQ VI=7V to 25V ma VI=8V to 25V -0.8 mv / 42 μv db Vo=8V to 18V Output Resistance Ro f=1khz 15 MΩ Short Circuit Current ISC VI=35V, TA= ma 3
4 LM7806 LM7806 ELECTRICAL CHARACTERISTICS (Refer to test circuit, TMIN<TJ<TMAX, Io=500 ma, VI=11V, CI=0.33 μf, Co=0.1 μf, unless otherwise specified) Output Voltage Vo 5.0mA Io 1.0A, PD 15W V VI=8.0V to 21V Line Regulation Vo Vo=8V to 25V mv VI=9V to 13V mv ma 0.5 Quiescent Current Change IQ VI=8V to 25V 1.3 ma VI=9V to 25V -0.8 mv / 45 μv db VI=9V to 19V Output Resistance Ro f=1khz 19 MΩ Short Circuit Current ISC VI=35V, TA= ma 4
5 LM7808 LM7808 ELECTRICAL CHARACTERISTICS (Refer to test circuit, TMIN<TJ<TMAX, Io=500 ma, VI=14V, CI=0.33 μf, Co=0.1 μf, unless otherwise specified) Output Voltage Vo 5.0mA Io 1.0A, Po 15W V VI=10.5V to 23V VI=11.5V to 23V Line Regulation Vo VI=10.5V to 25V mv VI=11.5V to 17V Load Regulation Vo Io=5.0mA to 1.5A mv ma Quiescent Current Change IQ VI=10.5V to 25V ma VI=11.5V to 25V -0.8 mv / 52 μv, VI=11.5V to 21.5V db Output Resistance Ro f=1khz 17 MΩ Short Circuit Current ISC VI=35V, 230 ma 5
6 LM7809 LM7809 ELECTRICAL CHARACTERISTICS (Refer to test circuit, TMIN<TJ<TMAX, Io=500 ma, VI=15V, CI=0.33 μf, Co=0.1 μf, unless otherwise specified) Vo Output Voltage 5.0mA Io 1.0A, PD 15W V VI=11.5V to 24V VI=12.5V to 24V Line Regulation Vo VI=11.5V to 25V mv VI=12V to 25V mv ma 0.5 Quiescent Current Change IQ VI=11.5V to 26V 1.3 ma VI=12.5V to 26V -1 mv / 58 μv db VI=13V to 23V Output Resistance Ro f=1khz 17 MΩ Short Circuit Current ISC VI=35V, 250 ma 6
7 LM7810 LM7810 ELECTRICAL CHARACTERISTICS (Refer to test circuit, TMIN<TJ<TMAX, Io=500 ma, VI=16V, CI=0.33 μf, Co=0.1 μf, unless otherwise specified) Vo Output Voltage 5.0mA Io 1.0A, PD 15W V VI=12.5V to 25V VI=13.5V to 25V Line Regulation Vo VI=12.5V to 25V mv VI=13V to 25V mv ma Io=5mA to 1.0A 0.5 Quiescent Current Change IQ VI=12.5V to 29V 1 ma VI=13.5V to 29V -1 mv / 58 μv db VI=13V to 23V Output Resistance Ro f=1khz 17 MΩ Short Circuit Current ISC VI=35V, 250 ma 7
8 LM7812 LM7812 ELECTRICAL CHARACTERISTICS (Refer to test circuit, TMIN<TJ<TMAX, Io=500 ma, VI=19V, CI=0.33 μf, Co=0.1 μf, unless otherwise specified) Vo Output Voltage 5.0mA Io 1.0A, PD 15W V VI=14.5V to 27V VI=15.5V to 27V Line Regulation Vo VI=14.5V to 30V mv VI=16V to 22V mv ma Quiescent Current Change IQ VI=14.5V to 30V ma VI=15V to 30V -1 mv / 76 μv db VI=15V to 25V Output Resistance Ro f=1khz 18 MΩ Short Circuit Current ISC VI=35V, 230 ma 8
9 LM7815 LM7815 ELECTRICAL CHARACTERISTICS (Refer to test circuit, TMIN<TJ<TMAX, Io=500 ma, VI=23V, CI=0.33 μf, Co=0.1 μf, unless otherwise specified) Output Voltage Vo 5.0mA Io 1.0A, PD 15W V VI=17.5V to 30V Line Regulation Vo VI=17.5V to 30V mv VI=20V to 26V mv ma 0.5 Quiescent Current Change IQ VI=17.5V to 30V 1.0 ma VI=18.5V to 30V -1 mv / 90 μv db VI=18.5V to 28.5V Output Resistance Ro f=1khz 19 MΩ Short Circuit Current ISC VI=35V, TA= ma 9
10 LM7818 LM7818 ELECTRICAL CHARACTERISTICS (Refer to test circuit, TMIN<TJ<TMAX, Io=500 ma, VI=27V, CI=0.33 μf, Co=0.1 μf, unless otherwise specified) Output Voltage Vo 5.0mA Io 1.0A, PD 15W V VI=21V to 33V Line Regulation Vo VI=21V to 33V mv VI=24V to 30V mv ma 0.5 Quiescent Current Change IQ VI=21V to 33V 1 ma VI=22V to 33V -1 mv / 110 μv db VI=22V to 32V Output Resistance Ro f=1khz 22 MΩ Short Circuit Current ISC VI=35V, TA= ma 10
11 LM7824 LM7824 ELECTRICAL CHARACTERISTICS (Refer to test circuit, TMIN<TJ<TMAX, Io=500 ma, VI=33V, CI=0.33 μf, Co=0.1 μf, unless otherwise specified) Output Voltage Vo 5.0mA Io 1.0A, PD 15W VI=27V to 38V Line Regulation Vo VI=27V to 38V mv VI=30V to 36V mv ma Quiescent Current Change IQ VI=27V to 38V ma VI=28V to 38V -1.5 mv / 60 μv db VI=28V to 38V Output Resistance Ro f=1khz 28 MΩ Short Circuit Current ISC VI=35V, TA= ma 11
KA78R05. Low Dropout Voltage Regulator. Features. Description. Internal Block Diagram.
KA78R5 Low Dropout Voltage Regulator www.fairchildsemi.com Features 1A / 5V Output low dropout voltage regulator TO Full-Mold package (PIN) Overcurrent protection, Thermal shutdown Overvoltage protection,
KA78R05. Low Dropout Voltage Regulator. Features. Description. Internal Block Diagram.
KA78R5 Low Dropout Voltage Regulator www.fairchildsemi.com Features 1A / 5V Output low dropout voltage regulator TO22 Full-Mold package (PIN) Overcurrent protection, Thermal shutdown Overvoltage protection,
KA278RXXC-Series. 2A Output Low Dropout Voltage Regulators. Description. Features. Internal Block Diagram.
KA7RXXC-Series A Output Low Dropout Voltage Regulators www.fairchildsemi.com Features KA7RXXC-series (//1/9/1) A/.V, V,.1V, 9V, 1V output low dropout voltage regulator TO- full-mold package (pin) Overcurrent
KA278RXXC-Series. 2A Output Low Dropout Voltage Regulators. Features. Description. Internal Block Diagram.
KA7RXXC-Series A Output Low Dropout Voltage Regulators www.fairchildsemi.com Features KA7RXXC-series (//).V, V, V output low dropout voltage regulator TO- full-mold package (pin) Overcurrent protection,
3-TERMINAL ADJUSTABLE REGULATOR LM317L
3-TERMINAL ADJUSTABLE REGULATOR DESCRIPTION Outline Drawing The is an adjustable 3-terminal positive voltage regulator capable of supplying 100mA over a 1.2V to 37V output range. It is exceptionally easy
SA278RXX 2A LDO VOLTAGE REGULATOR. HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV: Page 1 of 16 DESCRIPTION
2A LDO VOLTAGE REGULATOR DESCRIPTION The is a positive low voltage dropout regulator, and voltage dropout is below 0.5V at 2A. The provides two versions: fixed and adjustable versions. The is available
IL1117-xx. 1.0A Low Dropout Positive Voltage Regulator TECHNICAL DATA. Features. Applications. Absolute Maximum Ratings. Rev. 02
TECHNICAL DATA 1.0A Low Dropout Positive Voltage Regulator IL1117-xx The IL1117 is a series of low dropout voltage regulators which can provide up to 1A of output current. The IL1117 is available in eight
KA317M. 3-Terminal 0.5A Positive Adjustable Regulator. Features. Description. Internal Block Diagram.
www.fairchildsemi.com 3-Terminal 0.5A Positive Adjustable Regulator Features Output Current in Excess of 0.5A Output Adjustable Between 1.2V and 37V Internal Thermal Overload Protection Internal Short
TO-220. Symbol Description Max Units VIN Input Voltage 15 V IOUT DC Output Current PD/(VIN-VO) ma. -40 to 125 (* in case of IL
TECHNICAL DATA 1.0A Low Dropout Positive Voltage Regulator IL1117-xx The IL1117 is a series of low dropout voltage regulators which can provide up to 1A of output current. The IL1117 is available in eight
Advanced Power Electronics Corp.
300mA Low Dropout Linear Regulator with Shutdown Description The is a low dropout, positive linear regu lator with very low quiescent current. The can supply 300mA output current with low dropout voltage
GM1117 GM1117V1.01. Features. Description. Application. Typical Application Circuits 1A LOW DROPOUT PRECISION VOLTAGE REGULATOR
Description The is a positive low dropout regulator and is available in an adjustable version and fixed output voltage from 1.5V to 5.0V. All internal circuitry is designed to operate down to 800mV input
300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator
2 GND Preliminary Datasheet 300mA,Ultra-low noise, Small Package Ultra-Fast CMOS LDO Regulator General Description The is designed for portable RF and wireless applications with demanding performance and
A79L05~A79L24. AiT Semiconductor Inc. ORDERING INFORMATION
THREE TERMINAL NEGATIE OLTAGE REGULATOR DESCRIPTION Three-terminal negative voltage regulator. The is available in SOT89-3 Package. FEATURES main purposes the role of regulator and protection for a variety
AMS1117 1A Adjustable / Fixed Low Dropout Linear Regulator
1A Adjustable / Fixed Low Dropout Linear Regulator Description The is a series of low dropout voltage regulators which can provide up to 1A of output current. The is available in six fixed voltage, 1.2,
5A LOW DROPOUT POSITIVE REGULATOR
5A LOW DROPOUT POSITIVE REGULATOR Features Output Current : 5A Maximum Input Voltage : 12V Adjustable Output Voltage or Fixed 1.8V, 3.3V, 5.0V Current Limiting and Thermal Protection Standard 3Pin Power
IL1117C-xxLow Dropout Positive Voltage Regulator TECHNICAL DATA
IL1117C-xxLow Dropout Positive Voltage Regulator TECHNICAL DATA Description The IL1117C is a series of low dropout voltage regulators which can provide up to 1A of output current. The IL1117C is available
3A L.D.O. VOLTAGE REGULATOR (Adjustable & Fixed)
FEATURES Output Current of 3A Fast Transient Response 0.04% Line Regulation 0.2% Load Regulation Internal Thermal and Current Limiting Adjustable or Fixed Output oltage(1.5, 1.8, 2.5, 3.3, 5.0) Surface
AT1084 5A Low Dropout Positive Voltage Regulator
FEATURES DESCRIPTION Three-Terminal Adjustable or Fixed Output Output Current of 5A Low Dropout 1.3V at 5A Output Current Line Regulation: 0.04% Load Regulation: 0.2% Fast Transient Response OCP & OTP
HIGH BRIGHTNESS LED LIGHT BAR PRELIMINARY SPEC. Features. Package Dimensions
HIGH BRIGHTNESS LED LIGHT BAR PRELIMINARY SPEC Part Number: KASL-4805QB24S/7 Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Dimension: 48mm X 5mm X 1.6mm.
PIN DESCRIPTION. Enable (Input) IN GND OUT FLG ADJ LM39300T-X.X LM39300-X.X
FEATURES 3A minimum guaranteed output current 500mV typical dropout at 3A Ideal for 3.0V to 2.5V conversion Ideal for 2.5V to 1.8V or 1.5V conversion 1% initial accuracy Low ground current Current limiting
1 second start up, no external components 220µF <1 second start up + diode protection circuit 6800µF
Features Switching Regulator Description Efficiency up tpo 94%, no need for heatsinks Pin-out compatible with LM78XX linears Low profile (L/W/H=11.5 x 7.5 x 1.2mm) Wide input range Short circuit protection,
Features. Low Dropout Voltage Load regulation:0.5% Max current. The AMS1117 is available in six fixed
Description Features The AMS7 is a series of low dropout voltage regulators which can provide up to A of output Low Dropout Voltage Load regulation:0.5% Max current. The AMS7 is available in six fixed
1.0A Low Dropout Positive Voltage Regulator
1.A Low Dropout Positive Voltage Regulator DESCRIPTION The is a series of low dropout voltage regulators which can provide up to 1A of output current. The is available in four fixed voltage, 1.2V,1.8V,
XC62FJ Series GENERAL DESCRIPTION APPLICATIONS. FEATURES Maximum Output Current : 200mA TYPICAL PERFORMANCE CHARACTERISTICS
ETR03086-001 10V Input, 200mA Low Consumption Current Regulator GENERAL DESCRIPTION The XC62FJ series is a highly precise, low power consumption, positive voltage regulator manufactured with CMOS and laser
Low Dropout Regulator with Delayed Reset
FEATURES Externally set delay for reset 5V/750mA output Very low dropout voltage 0.6V at 0.5A Reverse battery protection 60V load dump protection 50V reverse transient protection Internal thermal over
ADV AD A 150kHz 40V Buck DC/DC Converter With Constant Current Loop. General Description. Features. Applications
2A 150kHz 40V Buck DC/DC Converter With Constant Current Loop General Description The is a 150KHz fixed frequency PWM buck (step-down) DC/DC converter, capable of driving a 2A load with high efficiency,
4707 DEY ROAD LIVERPOOL, NY PHONE: (315) FAX: (315) M.S. KENNEDY CORPORATION MSK Web Site:
4707 DEY ROAD LIVERPOOL, NY 13088 PHONE: (315) 701-6751 FAX: (315) 701-6752 M.S. KENNEDY CORPORATION MSK Web Site: http://www.mskennedy.com/ Voltage Regulators By Brent Erwin, MS Kennedy Corp.; Revised
Temperature Switch IC with Hysteresis Monolithic IC MM3488
Temperature Switch IC with Hysteresis Monolithic IC Outline This IC is a temperature switch IC that changes the IC output level from Low to High when the temperature around the IC reaches the detection
DUAL POSITIVE/NEGATIVE, 3 AMP, LOW DROPOUT FIXED VOLTAGE REGULATORS
MILPRF8 CERTIFIED M.S.KENNEDY CORP. 707 Dey Road Liverpool, N.Y. 088 DUAL POSITIVE/NEGATIVE, AMP, LOW DROPOUT FIXED VOLTAGE REGULATORS 000 SERIES () 706 FEATURES: Dual Low Dropout Voltage Internal Short
1.5A L.D.O. VOLTAGE REGULATOR (Adjustable & Fixed) LM1086
FEATURES Output Current of 1.5A Fast Transient Response 0.2% Line Regulation 0.3% Load Regulation Internal Thermal and Current Limiting Adjustable or Fixed Output oltage(1.5, 1.8, 2.5, 3.3, 5.0) Surface
EVERLIGHT ELECTRONICS CO., LTD.
Features Side view white LED White SMT package Lead frame package with individual 2 pins Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS compliant
APPLICATIONS: AVAILABLE OPTIONS
PRODUCT OVERVIEW The HB series offers up to 350 watts of output power in standard Half-Brick package. This series features high efficiency up to 92%, high power density and 1500 Volts of DC isolation.
SPECIFICATION VOLTAGE REGULATOR PQ200WNA1ZPH
SPEC. No. ED-04Q048 ISSUE March 30, 2005 OPTO-ELECTRONIC DEVICES DIVISION ELECTRONIC COMPONENTS GROUP SHARP CORPORATION SPECIFICATION DEVICE SPECIFICATION FOR VOLTAGE REGULATOR MODEL No. PQ200WNA1ZPH Specified
WATT MBH SERIES DC/DC CONVERTERS
Features Delivers up to 2100 Watts Efficiency up to 97 Groundbreaking low profile compact 9.0 L x 6.5 W x 1.25 H package Only 3.3 lbs No minimum load required Fixed frequency operation at 400 khz Fully
2.5X2.0mm SURFACE MOUNT LED LAMP. PRELIMINARY SPEC Part Number: KT-2520SE9ZS-RV Reddish-Orange. Typical Applications. Features. Package Dimensions
2.5X2.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Part Number: KT-2520SE9ZS-RV Reddish-Orange Features Dimension: 2.5mmx 2.0mm x 0.8mm. Low thermal resistance. Ceramic package with silicone resin. Small
Low Power, Low Dropout, 250mA, RF - Linear Regulators
Preliminary Datasheet GENERAL DESCRIPTION The series low-power, low-noise, low-dropout, CMOS linear voltage regulators operate from a 2.5V to 5.5V input and deliver up to 25mA. They are the perfect choice
R-78AA-0.5 INNOLINE. Features. 0.5 AMP SMD Single Output. Derating-Graph (Ambient Temperature) DC/DC-Converter
Features Description Replacement for R-78Axx-0.5SMD series RoHS 6/6 Conform (% Lead Free) Efficiency up to 97%,Non isolated, no need for heatsinks High Reflow Temperature SMD Package Adjustable Output
QHW050F1, QHW075F1, and QHW100F1 Power Modules: dc-dc Converters; 36 to 75 Vdc Input, 3.3 Vdc Output; 33 W to 66 W
QHWF1, QHW7F1, and QHW1F1 Power Modules: Data Sheet January 2 Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress
Output Current Input Current Over Load VDC VDC ma ma(typ.) ma(typ.) VDC μf %
Doc. EC-0093 FEATURES Industrial Standard 2"x1" Package Ultra-wide Input Range 9-36VDC, 18-75VDC, 40-160VDC I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range -40 C to +88 C
LM317L 3-Terminal Adjustable Regulator
3-Terminal Adjustable Regulator General Description The is an adjustable 3-terminal positive voltage regulator capable of supplying 100mA over a 1.2V to 37V output range. It is exceptionally easy to use
Secondary-side Control for Energy-saving AC Adaptors Monolithic IC MM1529
Secondary-side Control for Energy-saving AC Adaptors Monolithic IC MM1529 Outline This IC is a secondary-side control IC for AC adaptors with energy-saving mode, and switches to energysaving mode when
3Phase spindle motor driver for CD-RW
otor driver ICs BD6670F 3Phase spindle motor driver for CD-RW BD6670F BD6670F is a 3-phase spindle motor driver adopting 180 PW direct driving system. Noise occurred from the motor driver when the disc
FLT012A0Z/FLT012A0-SZ: Input Filter Modules 75Vdc Input Voltage Maximum; 12A Output Current Maximum
Features Compliant to RoHS EU Directive Directive 2011/65/EU (Z versions) Compatible in a Pb-free or SnPb reflow environment (Z versions) RoHS Compliant Applications Distributed power architectures Wireless
Advanced Monolithic Systems
Advanced Monolithic Systems FEATURES Adjustable or Fixed Output 1.5, 2.5, 2.85, 3.0, 3.3, 3.5 and 5.0 Output Current of 10A Low Dropout, 500m at 10A Output Current Fast Transient Response Remote Sense
S24SP15004 series 60W Single Output DC/DC Converter
6W Single DC/DC Converter FEATURES Efficiency up to 93.3% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.5mm (2. x1. x.41 ) With heat sink
LP2992 Micropower 250 ma Low-Noise Ultra Low-Dropout Regulator in SOT-23 and LLP Packages Designed for Use with Very Low ESR Output Capacitors
Micropower 250 ma Low-Noise Ultra Low-Dropout Regulator in SOT-23 and LLP Packages Designed for Use with Very Low ESR Output Capacitors General Description The LP2992 is a 250 ma, fixed-output voltage
LM , LM mA and 500mA Voltage Regulators
LM2937-2.5, LM2937-3.3 400mA and 500mA Voltage Regulators General Description The LM2937-2.5 and LM2937-3.3 are positive voltage regulators capable of supplying up to 500 ma of load current. Both regulators
Efficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
LM , LM mA and 500mA Voltage Regulators
400mA and 500mA Voltage Regulators General Description The LM2937-2.5 and LM2937-3.3 are positive voltage regulators capable of supplying up to 500 ma of load current. Both regulators are ideal for converting
LM ma Low Dropout Regulator
500 ma Low Dropout Regulator General Description The LM2937 is a positive voltage regulator capable of supplying up to 500 ma of load current. The use of a PNP power transistor provides a low dropout voltage
HK-TH10R-W. Features. Description This devices are made with TS
0.0NOATDEHO810.DE.3.65N0MI25.021Package Dimensions ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features φ10 LAMP LED. LOW POWER CONSUMPTION. CABINED VIEWING ANGLE.
(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
DPX30-xxSxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; 3.3 to 28 VDC Single Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
Ultra Low Dropout Positive Adjustable Linear Regulator Hermetic Package + 3.3Vin at 3.0A
PD-94469A Ultra Low Dropout Positive OM8504SC Adjustable Linear Regulator OM8504SF Hermetic Package + 3.3Vin at 3.0A Product Summary Part Number Dropout IO Vin Package OM8504SC 0.4 V 3.0A 3.3V MO-078AA
Sixteenth brick format 4:1 input voltage range 2.25kV basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 91%
Features Regulated Converter Description Sixteenth brick format : input voltage range.kv basic isolation Remote ON/OFF and trim pins UVLO, OTP, OVP, OCP and SCP Efficiency up to 9% The RPAS is a low cost
DPX30-xxDxx DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 9.5 ~ 18 VDC and 18 ~ 36 VDC and 36~ 75 VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS
Output Voltage Current. Input Current Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.) μf % 2.
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage High Efficiency up to 88% I/O Isolation 1500 VDC Operating Ambient Temp. Range -40 to 85 Overload
Lithium-Ion Battery Charge Control for AC Charger Monolithic IC MM1707 Series
Lithium-Ion Battery Charge Control for AC Charger Monolithic IC MM1707 Series Outline This IC is a one-cell lithium ion battery charge control IC for AC chargers. The charging current and charging can
IND065BLV Hornet: Non-Isolated DC-DC Voltage Regulator Modules
IND065BLV Hornet: Non-Isolated DC-DC Voltage Regulator Modules 12Vdc input; 16Vdc to 34Vdc output; 65W Max Power Vin+ VIN VOUT PGOOD MODULE Vout+ Applications Industrial Equipment Control Boards Test Equipment
DPX30-xxWSxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; 3.3 to 28VDC Single Output 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND OUTPUT
NON-ISOLATED DC/DC CONVERTERS 4.5V-32V Input 1.2V-5.0V/3A Output
NONISOLATED DC/DC CONVERTERS Input 1.2V5.0V/3A Output x7ah03h Series NonIsolated Remote On/Off High Input Under Voltage Lockout High Power Density OCP/SCP Excellent Thermal Performance Low Cost Description
AMS Amp LOW DROPOUT VOLTAGE REGULATOR. General Description. Applications. Typical Application V CONTROL V OUT V POWER +
5 Amp LOW DROPOUT OLTAGE REGULATOR General Description The AMS1505 series of adjustable and fixed low dropout voltage regulators are designed to provide 5A output current to power the new generation of
Delphi Series IPM, Non-Isolated, Integrated
FEATURES High efficiency: % @ Vin, V/A out Small size and low profile:.x.x.mm (. x. x. ) Output voltage adjustment:.v~v Monotonic startup into normal and pre-biased loads Input UVLO, output OCP Remote
Ku-Band VSAT Packaged Amplifier
Ku-Band VSAT Packaged Amplifier Top View Bottom View Key Features Typical Frequency Range: 12-19 GHz 25 db Nominal Gain 29 dbm Nominal P1dB Bias Conditions: 7 V, 433 ma PHEMT Technology Low cost true surface
Output Current Input Current Reflected Ripple. Efficiency (typ.) (Range) VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf % MTQZ50-72S05
Doc. EC-0094 FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp.
Output Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
MJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
Output Current Input Current Over Voltage. VDC VDC ma ma(typ.) ma(typ.) VDC μf % MKZI10-24S
Doc. E-92 MKZI1 SERIES D/D ONVERTER 1W, Reinforced Insulation, Railway ertified FEATURES Industrial Standard 2" 1" Package Ultra-wide Input Range 9-36VD, 18-75VD, -1VD I/O Isolation 3VA with Reinforced
(typ.) (Range) Input Specifications Parameter Model Min. Typ. Max. Unit 12V Input Models Input Surge Voltage (100ms.
FEATURES Smallest Encapsulated 50W! Package Size 2.0 x 1.0 x 0.4 Wide 2:1 lnput Range Excellent Efficiency up to 92% Over-Temperature Protection I/O-isolation Voltage 1500VDC Remote On/Off Control Shielded
S24SP series 40W Single Output DC/DC Converter
4W Single Output DC/DC Converter FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.2mm (2. x1. x.4 ) With
Description. Applications
3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: AA3528ZGS-AMT Green Features Industry standard PLCC-2 package. High reliability LED package. Wide viewing angle. Single color. Suitable for all SMT assembly
Description. Applications
3.5x2.8mm SURFACE MOUNT LED LAMP Features Industry standard PLCC-2 package. High reliability LED package. Wide viewing angle. Single color. Suitable for all SMT assembly and solder process. Available on
PL10S-12 Non Isolated DC/DC Converters Long Form Datasheet
PL10S12 Non Isolated DC/DC Converters Features Synchrono Rectification NonIsolated Fixed Frequency Nominal Input Voltage Range from (512V) Output Voltage Adjtable with the Trim Function (0.9 to 5V) Current
Output Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
NON-ISOLATED DC/DC CONVERTERS
NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 5V /.5A POWER PRODUCTS S7AH-02C / V7AH-02C Modules Nonisolated Compact, low profile surface mount package Fixed frequency* High efficiency means less power dissipation
VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
The LD2940 is a low dropout three-terminal regulator with a typical dropout of 280mV at 1A output current.
1A Ultra Low Dropout Voltage Regulator 1A Ultra Low Dropout Voltage Regulator General Description The LD2940 is a low dropout three-terminal regulator with a typical dropout of 280mV at 1A output current.
EB Series Eighth - Brick Up to 100 Watt DC-DC Converter
FEATURES DOSA Standard Form, Fit & Function Industry standard 1/8th brick footprint 4:1 input voltage range: 9-36 or 18 75Vin ROHS II Directive 2011/65/EU Compliant No minimum load required -40 0 C to
Maximum Input Current Vin=18V, 100% Load A Vin=24V ma No-Load Input Current
FEATURES Wide input voltage range, 18~60V 200W Output @ 18V~27V Vin range 300W Output @ 27~60V Vin range (Including 27V) Full Load Efficiency up to 88.7% @48Vin Intergrated fuse holder Parallel Connection
Silvertel. Ag5500. PoE Ultra Module. 1. Features. 2. Description. Maximum 60 Watt Output Power. Small size (½ Brick) High efficiency DC/DC converter
Silvertel V.4 Aug 04 Datasheet. Features Maximum 0 Watt Output Power Small size (½ Brick) High efficiency DC/DC converter Wide adjustable output voltage range 500V isolation (input to output) Input voltage
Description. Applications
3.5x2.8mm SURFACE MOUNT LED LAMP Features Package Dimensions ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Industry standard PLCC-4 package. High reliability LED
OSR03-24 S 05 A Series Name Input Output Output Assembly Voltage Quantity Voltage Option PART NUMBER STRUCTURE
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE OSR03-24 S 05 A Series Name Input Output Output Assembly Voltage Quantity Voltage Option
Silver T E L E C O M. 1. Features. 2. Description. IEEE802.3af compliant. Small SIL package size - 56mm (L) x 14mm (H) Low output ripple and noise
Silver T E L E C O M V2.0 Aug 2008 Pb. Features IEEE802.3af compliant Small SIL package size - 56mm (L) x 4mm (H) Low output ripple and noise Input voltage range 36V to 57V Only one low cost external decoupling
Table 2 Models BST12M-0.7S03PDM BST12M-0.7S06PDM BST12M-0.7S10PDM Conditions Input voltage range
Information The BSTM series is a small, thin, highly efficient and low noise non-isolated type step down DC-DC converter with input that has been developed for distributed feeding. Output voltage is adjustable
DCMCW60 SERIES FEATURES
DATASHEET DCMCW SERIES 4:1 Ultra Wide Input Voltage Ranges - C to +95 C Operating Temperature Single Outputs, Standard APPLICATIONS Distributed Power Systems Measurement Equipment Telecom Wireless Networks
SST-10-SB. Sky Blue LED. SST-10-Sky Blue Product Datasheet. Features: Table of Contents. Applications
SST-10-SB Sky Blue LED Features: Table of Contents SST-10 Binning Structure...2 Product Shipping & Labeling Information...3 Optical and Electrical Characteristics...4 High Power Sky Blue LED with Peak
Note1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2)
Features Regulated Converters : Wide input voltage range.6kvdc Isolation UL, IEC/EN69 and EN certified Efficiency up to 88% OVP, OCP & OTP + C max. case temperature Description The RPA-AW series are high
FW250R1 and FW300R1 Power Modules: dc-dc Converters: 36 Vdc to 75 Vdc Input, 28 Vdc Output; 250 W to 300 W
Data Sheet FW25R1 and FW3R1 Power Modules: dc-dc Converters: Features The FW25R1 and FW3R1 Power Modules use advanced, surface-mount technology and deliver high-quality, compact, dc-dc conversion at an
(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
DPX30-xxWDxx DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power
DC-DC Converter Module 10 ~ 40VDC, 18 ~ 75VDC input; ±12 to ±15 VDC Dual Output; 30 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW TERMINALS FOR INPUT AND
2 cell Li-ion Battery Charge from 3V~12V
2 cell Li-ion Battery Charge from 3V~12V General Description The is a complete constant-current/ constant voltage switching charger for multi cell lithium-ion batteries. Boost+Linear charger work with
LP2981 Micropower 100 ma Ultra Low-Dropout Regulator
LP2981 Micropower 100 ma Ultra Low-Dropout Regulator General Description The LP2981 is a 100 ma, fixed-output voltage regulator designed specifically to meet the requirements of battery-powered applications.
LP2982 Micropower 50 ma Ultra Low-Dropout Regulator
Micropower 50 ma Ultra Low-Dropout Regulator General Description The LP2982 is a 50 ma, fixed-output voltage regulator designed to provide ultra low dropout and lower noise in battery powered applications.
POWERBOX Industrial Line PMF20W Series 20W 4:1 Single Output DC/DC Converter Manual. DC/DC Converter Features. Introduction
Table of Contents Output specification Input specification General specification Environmental specifications EMC characteristic curves Output voltage adjustment Input source impedance Output over current
COB D-Gen.3. High Voltage LED Series Chip on Board. High efficacy COB LED package well-suited for use in spotlight applications. Features & Benefits
Product Family Data Sheet Rev. 2.0 2018.01.13 1# High Voltage LED Series Chip on Board COB D-Gen.3 High efficacy COB LED package well-suited for use in spotlight applications Features & Benefits Chip on
Standalone Linear Li-Ion Battery Charger with Thermal Regulation
HM4056 Standalone Linear Li-Ion Battery Charger with Thermal Regulation FEATURES DESCRIPTION Programmable Charge Current up to 1A No MOSFET, Sense Resistor or Blocking Diode Required Constant-Current/Constant-Voltage
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power
DPX15-xxWDxx Dual Output: DC-DC Converter Module 9.5 ~ 36VDC, 18 ~ 75VDC input; ±5 to ±15 VDC Dual Output; 15 Watts Output Power FEATURES NO MINIMUM LOAD REQUIRED 1600VDC INPUT TO OUTPUT ISOLATION SCREW
DC/DC Converter URB1D_LMD-10WR3 Series
DC/DC Converter FEATURES 10W, ultra wide input isolated & regulated single output DC-DC converter Ultra wide input voltage range (4:1) High efficiency up to 85% Enhanced isolation, isolation voltage: 2250VDC
Bi-CMOS LSI PC and Server. Fan Motor Driver
Ordering number : ENA1441C LV8804FV Bi-CMOS LSI PC and Server Fan Motor Driver Overview The LV8804FV is a motor driver for PC and server fans. Feature Direct PWM 3-phase sensorless motor driver Specifications