WATER PRESSURE SYSTEM AND PUMPS

Transcription

1 WTER PRESSURE SYSTEM ND PUMPS Hand pumps Bilge pumps Bronze pumps Diaphragm pumps Water pressure system Floating switches Filters You can consult this chapter even with your mobile device. 243

2 MNUL PUMPS MNUL PUMP WRRIOR For mounting on deck In a very robust alloy Double diaphragm design gives maximum efficiency 45 cm handle High delivery Inlet Wall of the hole thickness isibile parts WRRIOR 135 l/min 38 1, x 0 x 14,5 RE Service Kit RE 80027/K MNUL PUMP UNIERSL For mounting on bulkhead, through bulkhead, on deck or through deck Flow rate up to 25 gpm 28 cm handle High delivery Inlet Wall of the hole thickness isibile parts UNIERSL 100 l/min 38 1, x 0 x 14,5 RE Service Kit RE 80045/K MNUL PUMP THRUDECK For on deck mounting 28 cm handle Inlet Wall of the hole thickness isibile parts THRUDECK 50 l/min x 0 x 14,5 RE Service Kit RE 80040/K MNUL PUMP BULKHED For mounting through deck deck or through bulkhead Compact pump Right for small vessels MX dimensions Level of the pump ngle BULKHED 45 l/min x 204 x 0 40 RE Service Kit RE 80041/K HND PUMPS EXCELSIOR Double acting semi rotary hand wing pumps High manometric head Body pump on cast iron, internal parts on bronze MX dimensions of the pump EXCELSIOR 5 30 l/min - 1 1/2 287 x 320 x RE

3 BILGE PUMPS BRONZE PUPPY PUMPS Body in bronze, flexible impeller design, ery robust and silent Connection for 3/8 BSP male threads (mini puppy) Connection for ½ NPT male threaded (water puppy and maxi puppy) oltage MX bsorption Dimension MINI 7 l/min 6,5 hose 85 x 110 x RE MINI 24 7 l/min 3,5 hose 85 x 110 x RE WTER l/min 13 Gas 1 / 2 86 x 0 x RE 800 WTER l/min 7,5 Gas 1 / 2 86 x 0 x RE MXI l/min 21 Gas 1 / 2 86 x 0 x 219 3,7 RE MXI l/min 11 Gas 1 / 2 86 x 0 x 219 3,7 RE IMPELLER FOR WTER PUPPY 2000 RE 800/K SHOWER DRIN PUMP MULTypeSITIONL PUMP HED Flexible installation Compact and simple design Capable of extensive dry running Filter less oltage MX bsorption Dimension l/min /4 293 x 131 x RE l/min 2,5 19 3/4 293 x 131 x RE WSTE PUMP MULTypeSITIONL PUMP HED Flexible installation Compact and simple design Capable of extensive dry running Filter less oltage MX bsorption Dimension l/min /2 278 x 131 x RE l/min 2, /2 278 x 131 x RE ELECTRIC DIPHRGM PUMPS Corrosion resistant Right for small vessels Self-priming up to 2 m vertical lift Connections for ¾ (19) Id hose oltage MX bsorption Dimension II 13 l/min 7, / x 136 x 153 2,5 RE II l/min 6, / x 136 x 153 2,5 RE

4 WTER PRESSURE SYSTEM PR-MX WTER SYSTEM PUMPS Supplied complete with pressure switch and trigger nozzle. Silent and continuous rating You don t need to install the tank anymore Chamber with 3 valves (mod. PR-MX 1.9 and 2.9) Hose barb fittings or female hose barb Thermal overload protection (PR-MX 1-3-4) WTER SYSTEM PUMPS olt. MX bsorp WTER SYSTEM PUMPS 24 Press Bar Manom. H. mt PR-MX 1 4,3 l/min 1,9 9,5 3/ x 89 x 58 0,6 RE PR-MX 1,9 7 l/min 3,5 13 1/2 1,8 229 x 105 x 1 1,4 RE PR-MX 2,9 11 l/min 4,4 13 1/2 1-1, x 105 x 1 1,6 RE PR-MX 4 16,3 l/min /2 1-1, x 106 x 100 2,8 RE olt. MX bsorp Press Bar Manom. H. mt PR-MX 1, l/min 1,7 13 1/2 1,8 229 x 105 x 1 1,4 RE PR-MX 2, l/min 2,2 13 1/2 1-1, x 105 x 1 1,6 RE PR-MX ,3 l/min /2 1-1, x 106 x 100 2,8 RE WTER PRESSURE PUMP FLO 5.0 Constant pressure water pumps - Feature the revolutionary new DiMOND technology designed to automatically diagnose and monitor all aspects of your pump s performance to prevent system failure oltage Flow bsorption Port Type Bar /2 25 RE /2 25 RE PR MX 7.0 WSHDOWN PUMP Suitable for high pressure applications. up to 26 l/min Provided with Pumpguard filter. Fully compatible with seawater Silent, self-priming and dry running oltage MX l/min bsorption MX bar ,1 RE ,1 RE ,7 RE ,7 RE DUL MX HYDRULIC SYSTEM Combined pumps with SD hydraulic flux and a Par Max 4 System It can delivery 30l/m if needed. Homogenous and balanced flux, as requested Fixed water pressure Self-priming pump up to 3 m No accumulator tank requested oltage MX l/min bsorption MX x 220 x RE x 220 x RE

5 WTER PRESSURE SYSTEM FLOJET PRESSURE CONTROLLED PUMPS Compact. Silent Low absorption Duplex diaphragm design For intermittence use They don t need an accumulator tank olt bsorp Press. button MX a 0,7bar ON OFF LF ,3 l/min 1,9 9,5 3/8 1,5 bar 2,4 bar 162 x 89 x 58 0,6 RE TRIPLEX UTOMTIC WTER SYSTEM PUMP Three chamber diaphragm design Self priming up to3 mt suction lift nti-vibration system, very silent Special snap-in port fitting Pump able to run dry without damage Meets ISO 8846 olt bsorp Press. button MX a 0,7bar ON OFF R ,6 l/min 3,5,5 1 / 2 MX 1,7 bar 229 x 1 x 152 1,6 RE R l/min 4,4,5 1 / 2 MX 3,8 bar 229 x 1 x 152 1,6 RE R l/min 2,2,5 1 / 2 MX 1,7 bar 229 x 1 x 152 1,6 RE QUD II DIPHRGM WTER SYSTEM PUMPS Four-piston design delivers higher flow rates High delivery. No pressure switch Self-primes up to 3 m vertical lift Manometric head 3 mt Big ports 19 ID hose To combine with accumulator tanks between 8 and 22 lt olt bsorp Press. button MX a 0,7bar ON OFF ,5 l/min 3,9,5 1 / 2 MX 2,5 bar 208 x 160 x 95 1,8 RE ,5 l/min 2,5 1 / 2 MX 2,5 bar 208 x 160 x 95 1,8 RE l/min / 4 MX 2,8 bar 252 x 160 x 95 2,8 RE l/min 2, / 4 MX 2,8 bar 252 x 160 x 95 2,8 RE SENSOR SD DC WTER SYSTEM ariable speed control. Speeds up as demand Increases Nearly Silent Operation. Operates on l2dc or 24dc Manometric head 3 Mt. Pump able to run dry (for short period) without damage olt bsorp Press. button MX a 0,7bar ON OFF R ,5 8-4,5 1 / 2 1,7 bar 2,4 bar 221 x 160 x 95 2 RE

6 BILGE PUMS 1 BILGE PUMP ( NON-UTOMTIC) Corrosion resistant, easy cleaning. ful and reliable. Fitted base Non-automatic and automatic model. CE and ISO 8849 approvals PUMPS 24 PUMPS Capacity GPH Capacity Liters/h Rule oltage bsorp Pict. gr , ,3 x RE D 2, ,3 x RE R ,3 x 95, RE ,5 28,6 73 x 73 x RE D 5 28,6 60,3 x RE ,6 108 x RE ,6 108 x RE x RE Capacity GPH Capacity Liters/h Rule oltage bsorp Pict. gr D 24 1, ,3 x RE 80203/ R ,3 x 95, RE D 24 2,5 28,6 60,3 x RE80206/ ,5 28,6 108 x RE 80214/ ,6 108 x RE 80215/ x RE D x RE RULE MTE BILGE PUMP No power wasted until the pump activates. They allow a better bilge emptyng. Oval shaped; compact figure. Feature both a pump and noon-mercury float switch in a single, compact housing. Right for small vessels 6 PUMPS 24 PUMPS Capacity GPH Capacity Liters/h Rule oltage bsorp Pict. gr RM 500 1, x RE RM , x RE RM ,3 28,6 7 x RE Capacity GPH Capacity Liters/h Rule oltage bsorp Pict. gr RM x RE 80277/ RM , x RE 80204/ RM ,4 28,6 7 x RE 80207/24 UTOMTIC BILGE PUMPS Fully automatic.computerized. No bilge float switch is necessary The pumps activates ciclycally each 2,5 min. for only one second for perceiving the water If there is water, the pump keeps turning and intaking Low consumption waste for test Capacity GPH Capacity Liters/h Rule oltage bsorp Pict. gr S 2, ,3 x RE S 7 28,6 108 x RE S 15, x RE

7 DIESEL OR OIL TRNSFER PUMPS DIESEL OR OIL TRNSFER PUMPS Suitable for medium duty This pump is rated for minutes operation Connections for 19 id hose Complies with ISO 8846 marine (ignition protected) oltage bsorp Manometric Head mt Continuous rated ,5 3/ x7x193 NO RE ,5 3/ x7x193 NO RE F x160x200 NO RE F x160x200 NO RE F ¼ x170x250 NO RE CYCLONE CIRCULTION PUMP Robust, high efficiency and delivery Suitable for hot & cold water systems, windscreen washing, livewell and bait tank system Maximum flow 110lpm Low and high pressure versions available nti-clogging impeller oltage l/min bsorption Dimension x160x0 6,8 RE x160x0 6,8 RE x110x0 10,5 RE x110x0 10,5 RE REERSIBLE OIL CHNGE PUMPS Self priming pumps with impeller in Nitril Reversible permanent magnet motor with integral reversing switch oltage bsorp Bar Manometric Head mt Continuous rated Codice /8-90 x111x162 2,2 RE /8-90 x111x162 2,2 RE

8 CENTRIFUGL MOTOR PUMPS CENTRIFUGL ELECTRIC PUMPS SELF PRIMING IN BRONZE Whit star impeller and an outstanding self priming capacity PPLICTIONS: bilge, chain washing, fire-fighting, intake diesel oil and liquids system supplying. Body pump: bronze. Impeller: bronze Shaft : ISI 316 stainless steel Mechanical seal of high quality thanks to stainless steel, graphite and ceramic We suggest to install a filter and a clapet valve on the suction pipe CM-BT oltage bsorp MX RPM RE RE RE CM-BT DIRECT CURRENT Max Max Manometric Head mt HxLxP CM 311BT 24 1, x200x RE CM 3BT 24 1, x250x RE CM 401BT 24 1, x250x RE CM-BT oltage bsorp MX RPM CM-BT LTERNTING CURRENT Max Max Manometric Head mt HxLxP CM 311BT 220 1,1 50 Hz x210x RE CM 3BT 220 2,2 50 Hz x260x RE CM 313BT Hz x260x RE CM 401BT 220 2,2 50 Hz x260x RE CM 402BT Hz x285x RE CM 403BT 220 5,5 50 Hz x310x RE CM 501BT Hz x285x RE CM 502BT 230/400 T 9,2 50 Hz x320x RE CM 503BT 230/400 T Hz x370x RE CM 651BT 230/400 T 7,5 50 Hz x320x RE CM 653BT 230/400 T hz X360X RE CM 652BT 230/400 T Hz x360x RE Hz or TRIPHSE ENGINE ILBLE ON REQUEST 250

9 CENTRIFUGL MOTOR PUMPS SELF PRIMING CENTRIFUGL MOTOR PUMPS Self-priming el/pumps CB series Supplied with star impeller (CB CB CB 431 series) PPLICTIONS: bilge, chain washing, fire-fighting, intake diesel oil and liquids High self-priming capacity (up to 9 Mt.) Body pump: bronze Star impeller: in a special brass alloy Shaft: ISI 316 stainless steel Mechanical seal of high quality thanks to stainless steel, graphite and ceramic We suggest to install a filter and a clapet valve on the suction pipe Mod oltage bsorp RPM Max Prev.MX m HxLxP CB 61 G 230 0, ½ 115x0x RE CB 61 G 0, ½ 105x5x225 7 RE 80091/ CB 61 G 24 0,18 7, ½ 105x5x225 7 RE 80091/24 CB 61 RG 0, ½ 7x140x210 8 RE CB 61 RG 24 0, ½ 7x140x210 8 RE CB 80 E 0, ¾ 160x155x326 RE CB 80 E 24 0, ¾ 160x155x326 RE CB 80 E 230 0, ¾ 161x134x RE CB 80 E 230/400 0, ¾ 161x134x RE CB 90 E 24 0, x155x RE CB 90 E 230 0, x136x RE CB 90 E 230/400 0, x136x RE Mod oltage CB 331 CB 332 CB 431 bsorp RPM Max Prev.MX m HxLxP CB , ¼ 190x175x RE CB , ¼ 217x175x RE CB 331-B 230 1, ¼ 255x175x RE CB 331-B 230 /400 T 1, ¼ 225x175x RE CB , "1/4" 300x200x RE CB 332-B 230 2, ¼ 270x193x RE CB 332-B 230 /400 T 2, ¼ 240x193x RE CB , /2 225x220x RE CB 431-C " 1/2" 260x200x RE CB 431-C 230/400 T " 1/2" 260x200x RE CB 431-B 230 2, /2 290x200x RE CB 431-B 230 /400 T 2, /2 260x200x RE

10 SELF PRIMING MOTOR PUMPS SELF PRIMING MOTOR PUMPS PPLICTIONS: intake diesel oil, intake liquids (sea and fresh water) Grey water discharge (galley and shower), bilge Self-priming REERSIBLE el/pumps Supplied with star impeller (possible to invert the flow) High self-priming capacity (up to 9 Mt.) (Excluded CP20G and CP30G model) Body pump and star impeller in bronze Shaft: ISI 316 stainless steel Mechanical seal of high quality thanks to stainless steel, graphite and ceramic We suggest to install a filter and a clapet valve on the suction pipe oltage RE RE CP CP 24 bsorp RPM Max Prev. MX m CP HZ MONOPHSE CP20/1 0, ¾ 150x0x210 7 RE CP20/1 24 0, ¾ 143x0x235 6 RE CP20/2 24 0, ¾ 150x0x210 7 RE CP26/2 0, , x140x RE CP26/1 24 0, , x140x RE CP26/1 24 0, x140x300 9 RE CP30/1 24 0, x140x RE CP30/C1 24 0, x140x RE CP , ½ 215x180x RE CP , ½ 255x190x RE oltage bsorp RPM Max Prev. MX m CP20 G 230 0, ¾ 143x0x260 6,5 RE CP26/ , x140x300 RE CP , ½ 215x180x RE CP , ½ 255x190x RE CP65/ , ½ 330x250x RE CP65/ , ½ 330x250x RE ON REQUEST 230 / 400 three-phase or 60Hz 252

11 SINGLE SCREW MOTOR DRIEN PUMPS SINGLE SCREW MOTOR DRIEN PUMPS MG SERIES FOR SOLID LIQUID pplications: emptying of waste, gravel pump, to pump liquid with small part in suspension Positive displacement pumps with a metal single-thread helical rotor Body pump: bronze Screw rotor t: ISI 316 stainless steel It is important to check the rotation sense to avoid the rotor to unscrew in case working in the anti-clockwise sense oltage bsorp RPM Max Prev.MX m M44G 0, m 1 171x145x RE M44G 24 0, m 1 171x145x RE M44G 230 0, m 1 204x155x443 15,5 RE M44G 230/400 T 0, m 1 204x155x443 15,5 RE SINGLE SCREW MOTOR DRIEN PUMPS FOR SOLID LIQUID These el/pumps are positive displacement pumps, They are based on a metal single-threaded helical rotor Turning in a rubber double-thread helical stator the pump can carry all kinds of fluids, dirty, viscous and with small parts in suspension Being a self-priming pumps, it is necessary, only at the first start, to Fill the body pump of water to lubrificate the stator and to have the priming We suggest to install a clapet no-return valve on the suction pipe On request available for diesel transfer oltage RPM Max Press Bar MI , ½ 193x200x RE MI , ½ 223x200x RE MI /400 T 1, ½ 233x200x RE MI , x200x RE MI , x200x RE MI /400 T 1, x200x RE MI , x200x RE MI /400 T 1, x200x RE NB: IN CSE OF SPIRTION FROM BOE an elbow pipe can be supplied 253

12 ELECTRIC PUMPS SELF-PRIMING GER PUMPS pplications: Intake of lubrificant and diesel oil, fuel and similar liquids up to 6 E viscosity (only for model IN) Body pump: Cast iron Gears: steel enbloc with special shaft IN SERIES oltage KW bsorp MX l/min Manom H. mt HxLxP IN 0, / x140x285 8 RE IN 24 0, / x140x285 8 RE PQ 20 PQ SERIES oltage RPM Manom KW IN OUT H. mt HxLxP PQ , ½ ½ 50m 155x185x RE PQ , ¾ ¾ 50m 155x185x460 20,0 RE PQ , ¾ ¾ 50m 195x205x515 30,0 RE PQ , m 220x205x RE PQ , m 240x205x RE PQ , m 250x210x RE FQ , m 195x153x RE CENTRIFUGL ELECTRIC PUMPS CONTINUOUS DUTY, NOT SELF-PRIMING pplications: distribute clean water (fresh or sea water) at continuous duty, sanitary plants, conditioning system, water supply, heating, cooling and circulation plants Body pump: bronze. Impeller: special brass alloy. Shaft: ISI 316 stainless steel Mechanical seal: high quality on ceramic, graphite inox CB 24 oltage KW bsorp MX l/min Manom H. mt HxLxP CB 160 RE 24 0, / x5x270 5 RE CB 20 E 24 0, x160x RE CB 22 E 24 0, x175x330 RE CB 25/16 B 24 1, X200X RE CB HZ oltage IN OUT Manom H. mt HxLxP CB 160 E 230 0,15 40 ½ ½ 5 135x5x270 5 RE CB 20 E 230 0, x160x RE CB 22 E 230 0, x175x330 RE CB 25/16B 230 1, ½ x200x RE CB 25/16B 230/400 T 1, ½ x200x RE DIRECT CURRENT ENGINES pplications: cooling plants, compressor, pumps, blowers and traction system With permanent magnet motor. The full-load torque is up to 10 times the nominal torque. Degree of protection: IP22 MP oltage KW bsorp MX RPM IP HxLxP MP 71 S4 0, x145x195 5 RE MP 71 S4 24 0, x145x195 5 RE MP 71 M4 24 0, x145x256 8,5 RE

13 SPRE PRTS FOR GINNESCHI PUMPS KIT FOR CB61 24 Impeller, impeller key, mechanical seal, seeger, O-ring, brushes RE KIT FOR CB80 E 24 Impeller, impeller key, mechanical seal, seeger, O-ring, diffuser key, brushes RE KIT FOR CB80 E HZ MONOPHSE RE (NEW MODEL) Impeller, impeller key, mechanical seal, seeger, O-ring, diffuser key, capacity KIT FOR CB90 E 24 (NEW MODEL) Impeller, impeller key, mechanical seal, seeger, O-ring, diffuser key, brushes RE KIT FOR CP25/1 24 Impeller, impeller key, impeller block nut, mechanical seal, O-ring, brushes RE KIT FOR CM 301/311BT 24 Impeller, impeller key, mechanical seal, compensation ring, seeger, Scraper, disc packing, elastic ring, bearing packing, brushes RE KIT FOR CM 301/311BT HZ MONOPHSE Impeller, impeller key, mechanical seal, compensation ring, seeger, Scraper, disc packing, elastic ring, bearing packing, capacitor RE KIT FOR CB20E 24 (NEW MODEL) Impeller, impeller key, mechanical seal, O-ring, brushes RE KIT FOR CB22 E HZ MONOPHSE Impeller, impeller key, mechanical seal, OR-ring, brushes RE KIT FOR ECO-M44 G 24 Stator, rotor, joint, mechanical seal, splash guard ring, brushes RE

14 WTER PRESSURE SYSTEM WTER PRESSURE SYSTEM WITH UTOMTIC RUNNING pplications: pressure water distribution on board. Supplied with manometer, pressure switch and no-return valve. The tank is supplied with the stainless steel ISI 316 flange and the butyl rubber fixed membrane anti-water haer. Self-priming electric pump with star impeller (quick priming). Body pump: bronze. Impeller: special brass alloy. Shaft: ISI 316 stainless steel. olt bsorp IDROMINI CB Sheet tank IDROMINI ECOJET IDRO ECOJET Press max Switch adg HxLxP CB 61 G 0, L ½ 22 2,2 0,9-1,6 240x180x300 9 RE CB 61 G 24 0, L ½ 22 2,2 0,9-1,6 240x180x300 9 RE CB 80 E 24 0, L ¾ ,4-2,8 350x170x RE olt bsorp Sheet tank Press max Switch adg HxLxP ECOJET 0, L ,6 1, x190x RE 80093/ ECOJET 24 0, L ,4-2,4 130x190x RE 80093/24 ECOJET ,37-5 L ,5 1,5-2,8 130x190x RE olt bsorp Sheet tank Press max Switch adg HxLxP ECOJET 1B 0, L ,6 1, x255x RE ECOJET 1B 24 0, L ,4-2,4 600x255x RE ECOJET 2B 24 0, L ,5 1,5-2,8 590x255x RE ECOJET 2B 230 0,45-20 L ,5 1,5-2,8 590x255x RE B version for fresh water ; on request BB series for sea water SELF-PRIMING MOTOR PUMPS ECOJET pplications: chain washing, fire fighting, water lifting, conditioning system, supply WC The jet electric pumps series have a closed impeller Have an outstanding self-priming capacity Body pump: bronze Flange: Stainless steel Impeller: special brass alloy Shaft: ISI 316 stainless steel. Mechanical seal: High quality on ceramic olt bsorp MX l/min pollici HxLxP ECOJET 1B 24 0, x160x RE ECOJET 2B 230 0, x160x400 RE JET 3B 24 0, x185x RE JET 4B 24 0, x185x RE JET , e 1, x215x RE B version for fresh water ; on request BB series for sea water 256

15 WTER PRESSURE SYSTEM olt bsorp WTER PRESSURE SYSTEM WITH UTOMTIC RUNNING pplications: pressure water distribution on board Supplied with manometer, pressure switch and no-return valve The tank is supplied with the stainless steel ISI 316 flange and the butyl rubber fixed membrane anti-water haer Self-priming electric pump with star impeller (quick priming) Body pump: Steel Impeller: tecnopolimere Shaft: ISI 316 stainless steel Tank INOX 304 Press max Switch adg HxLxP ECOINOX 1 0, L ,6 bar 1,2-2 bar 600x255x RE ECOINOX , L bar 1,4-2,4 bar 600x255x RE ECOINOX , L ,5 bar 1,5-2,8 bar 590x255x RE ECOINOX ,45-20 L ,5 bar 1,5-2,8 bar 590x255x RE WTER PRESSURE SYSTEM IDROJET pplications: pressure water distribution on boat Supplied with relays, manometer, pressure switch and non-return valve The tank is supplied with the stainless steel flange and the butyl rubber fixed membrane anti-water haer. Self priming el/pump with star impeller Body pump: bronze Impeller: special brass alloy Shaft: stainless steel aisi 316 olt bsorp Steel tank IDROJET (20 L) IN - OUT Press max Switch adg HxLxP IDROJET , L ,2 bar 1,8-3,2 bar 610x255x RE IDROJET ,55-20 L ,2 bar 1,8-3,2 bar 610x255x RE IDROJET , L ,5 bar 1,6-3 bar 610x255x RE IDROJET ,75-20 L ,5 bar 1,6-3 bar 610x255x RE IDROJET 4R 24 0, L ,5 bar 2,5-3,5 bar 610x255x RE IDROJET , L 1 ½ ,7 bar 2,5-3,9 bar 660x360x RE IDROJET ,1-20 L 1 ½ ,7 bar 2,5-3,9 bar 660x360x RE CONTROL PRESS WTER PRESSURE SYSTEM Electronic control: continuous pump running that avoid the stop and go Cylindrical tanks are not necessary pplications: pressure water distribution on board Self diagnosis with alarm and three LED s for status indication (red, orange and green) utomatic stop in case of no water utomatic starting of the pump at the minimum value prefixed It is suitable to install a flexible pipe on delivery point olt bsorp Mx Press max HxLxP ECOJET 1B C.E. 0, l/min x230x RE ECOJET 2B C.E. 24 0, l/min 1 3,5 480x230x RE ECOINOX 1 C.E 0,3-45 l/min x230x425 8 RE ECOINOX 1 C.E 24 0,3-45 l/min x230x425 8 RE ECOINOX 2 C.E 24 0,37-55 l/min 1 3,5 470x230x425 9 RE ECOINOX 2 C.E 230 0,37-55 l/min 1 3,5 470x230x425 9 RE JET 4B 24 0, ,5 480x260x RE JET 4B 220 0,75-80 l/min 1 3,5 480x260x RE

16 PUMPS TRNSFER OIL ND DIESEL SERIE OCK1-E FOR OIL CHNGE Compact size oil change and diesel transfer kit, fitted with an electronic control panel wich guarantees variable speed of the motor in relation to the viscosity of the fluid, the possibilty of reversing the flow and a /24 universal voltage Supplied with all necessary accessories oltage Man. h. mt bar l/h bsorp. Fusibile OCK1-E / ,5 3/8" BSP RE SELF-PRIMING ELECTRIC PUMP FOR LUBRICTING OILS DIESEL ND ISCOUS Self-priming electric pump with bronze gears for transferring lubricating oils, diesel and viscous Brass gears, pump body and connections in nickeled brass, shaft in stainless steel - Seals in FKM and O-ring in NBR. oltage Man. h. mt bar l/h Consump. UP3/C 220 1, ,8 1,25 3/8" RE UP6/C 220 1, ,7 3 1/2" RE P45/C 220 1, ,3 1,25 25 RE Fuse KIT FOR DIESEL REFUELING Self-priming impeller electropump provided with integrated by-pass valve Body in aluminium with double connection. Carter with knob, on/off switch and battery clamps Water pistol, 2.5m aspiration pipe with filter and 4m of outlet pipe oltage Man. h. mt bar l/min Consump. P45-K 1,5 1, RE P45-K 24 1,5 1, , RE Fuse OIL CHNGE KIT Kit with membrane panel, electronically controlled by a membrane panel Designed for oil fill and drain operations Electronic regulation according to oil viscosity/temperature utomation block in case of empty tank, short circuit or after 30 minutes of operation oltage Man. h. mt bar l/min bsorp. Dimension Inch fittings UP3-RK /24 1, / 2 159x166x101 3/8 BSP RE UP6-RK /24 1, / 2,5 199x174x108 1/2 BSP RE TRNSFER PUMP Complying with ISO 8846 EN Can run dry - Pump body and gear is made in PTFE PTENTED. Simple design and easy upkeep. Reversible flow direction (switch not included) Can pump oil, diesel,water - Can pump also alkaline solution and acids with ptfe seal available on request olt : bsorption Pump / x78x95 RE Pump / x78x95 RE ELECTRIC GER PUMP pplications: transfer of lubricating oil or viscous liquids. Self priming electric pump with bronze gear. Body: OT58 brass. Gear: bronze. Shaft: aisi 303 stainless steel. Seal: rubber lip seal. Motor: permanent magnets with brushes. : two brass connections for Ø14 inner tube and one quick fit connection for 8 external tubing. Degree of protections: IP55 olt l/h Ø6 Ø8 Ø14 bsorption p. rubber rilsan UP2/OIL ,3-2,7 8 8 x 106 x 73 1,2 RE UP 3/OIL ,5-6, x 99 x 86 1,4 RE UP 4/OIL ,5-3, x 99 x 86 1,4 RE UP6/OIL ,5-4, x 99 x 94 2,5 RE UP/OIL L/h(Ø) 900L/h(Ø16) 5,5-6,5 16 X x 2 x RE Kit Rilsan tubing Ø 8 and 6 external 5 mt RE

17 WTER PRESSURE SYSTEM ND PUMPS SELF PRIMING BILGE PUMP pplications: right for cleaning deck, emptying the bilge, transfer fresh water Body: bronze olt bsorption Preval L mt gr Little 30 7, / x 0 x RE Little / x 0 x RE Big / x 0 x RE Big / x 0 x RE ELECTRIC PUMP WITH RUBBER GERS Self-priming electric pump with rubber gears Fitted with waterproof cable guide and internal brush holder with EMI filter Ideal for bilge and waste water on any type of boat olt l/min bar bsorption Man. h. mt UP1-J /8 BSP RE UP1-J /8 BSP RE UP1-N /2 BSP RE UP1-N /2 BSP RE UP1-M 45 1, /2 BSP RE 800 UP1-M , /2 BSP RE 801 ELECTRIC PUMP WITH BRONZE GERS pplications: transfer of various liquids(intermittent use) Self priming electric pump with bronze gear Body: OT58 brass Gear: bronze Shaft: aisi 303 stainless steel Seal: rubber lip seal Motor: permanent magnets with brusches : 3/8 BSP inner thread and Ø14 bore hose connections Degree of protections: IP55 olt bsorption Man. l/min h. mt UP2 10 2,8-3,2 1,5 3/8 8 x 114 x 73 1,2 RE 808 UP ,4-1,6 1,5 3/8 8 x 114 x 73 1,2 RE UP ,5 3/8 170 x 167 x 95 1,5 RE UP ,5 3/8 170 x 167 x 95 1,5 RE UP ,5 16 1/2 199 x174 x 108 3,1 RE UP ,5 16 1/2 199 x174 x 108 3,1 RE UP /2 2 x 174 x 109 4,3 RE UP /2 2 x 174 x 109 4,3 RE

18 PUMPS ELECTRONIC WTER PRESSURE PUMPS oltage supply:/24 Integrated check valve olt MX Bar bsorp Man. h. mt UP2/E / ,8-3,2 1 3/8 169x116x73 RE UP3/E / , ,5 3/8 172x187x98 RE UP6/E / , /2 240x213x108 RE UP/E / /2 250x213x108 RE SHOWER KIT Shower kit complete with self-priming pump with electronics control. Equipped with helical PTFE gears, nickl-plated brass body and connections, integrated check valve. Complete with 4m white hose with screw connetcions and hand washer equipped with built-in white container. The kit is especially suitable for yachts, rubber dinghies and sailing boats. olt l/min bar bsorp. Man. m SP2 / , /8 BSP 162x105x73 RE ELECTRONIC WTER PRESSURE PUMPS WHITH MECCNICL SWITCH Self-priming electric pumps with PTFE helical gears - Nickelplated brass body Stainless steel shaft - Integrated check valve olt l/min bar bsorp. Man. m UP2/ 10 1,5 3,2 1,5 3/8" BSP 166x116x73 RE UP2/ ,5 1,6 1,5 3/8" BSP 166x116x73 RE UP3/ 15 2,5 6 1,5 3/8" BSP 173x249x118 RE UP3/ ,5 4 1,5 3/8" BSP 173x249x118 RE UP6/ ,5 1,5 1/2" BSP 199x261x115 RE 803 UP6/ ,5 1/2" BSP 199x261x115 RE UP/ , /2" BSP 217x260x0 RE DECK WSHING PUMP Complete kits including an automatic self-priming electric pump equipped with helical PTFE gears, in-line filter, nickel plated brass body and check valve. Equipped with quick-click connection, stop-jet, check valve and trigger with jet regulation The kit are particularly suitable for washing operations either with salt or fresh water olt MX bar Consump. Man. m DP ,5 3/8" BSP 160x249x102 RE DP ,5 3/8" BSP 160x249x102 RE DP9 4 1,5 3/8" BSP 184x225x110 RE DP ,5 3/8" BSP 184x225x110 RE DP /8" BSP 213x261x115 RE DP /8" BSP 213x261x115 RE Quick connection for washing pump RE

19 BILGE PUMPS BILGE PUMPS Corrosion resistant. Body can be dismantled by a simple snap off movement. Not automatic models. It can be used a floating switch. ery silent, body in nylon. olt bsorption L gr l/h / 4 Ø 75 x RE l/h /8 Ø 0 x RE l/h /8 Ø 0 x RE l/h /8 Ø 0 x RE SUBMERSIBLE BILGE PUMPS Bilge pumps. Body in robust BS, corrosion resistant. olt Preval mt bsorption Fuse Dimension UP ,5 5 94,5xØ59 RE UP ,2 3 94,5xØ59 RE UP , ,7xØ78 RE UP , ,7xØ78 RE UP , xØ96 RE UP , xØ96 RE UP , xØ96 RE UP , xØ96 RE UP , xØ110 RE UTOMTIC BILGE PUMP Compact, all-in-one unit. Integrated snap sensing switch into the pump body No Mercury. Removable clip on basket design. 3-wire device can be run in auto or manual override mode. No tools needed for maintenance. Extremely energy efficient. Water-cooled motor for long service intervals Meets the international standard, ISO 8846 marine. olt Ø bsorption ,8 151x78x95 RE x78x95 RE ,2 151x78x95 RE x78x95 RE ,2 151x78x95 RE 807 SELF PRIMING DIPHRGM PUMP pplications:, emptying the bilge Base and support in Nylon The pump can work without water for short periods without damage olt bsorption Preval L mt gr Pompa 18 6, / x100 x 150 2, RE Pompa , / x100 x 150 2, RE

20 FLOTING SWITCHES FLOTING SWITCH Fully sealed. gainst deflagration materials. oltage MX External MX Mercury x 100 x 56 RE ELECTRONIC SWITCHES FOR BILGE PUMPS Operation by microcontroller. dvanced digital filter to detect the presence of water. Remote indication of operation status by led (optional). Manual remote pump switch-on by button (optional). Signal for prolonged bilge pump switch on (if led is installed). Protection against excessive battery rundown. Switch on (5 sec) switch off (20 sec) delay to avoid false. Switch-on switch-off cycling of the pump caused by the roll of the boat. Watertight case. oltage MX External MX bsorp. When iding Sensor number Switch ON EBSN x 83 x 38 7,5 m 2 inox 5 sec. RE EBSN x 83 x 38 7,5 m 2 inox 5 sec. RE EBSN x 83 x 38 7,5 m 2 inox 5 sec. RE FLOTING SWITCH RULE--MTIC Quiet running. Fully sealed. gainst explosion oltage MX External MX x 115 x 50 RE 802 FLOTING SWITCH SUPER SWITCH For pump of high absorption. External material and electric contact of high quality. Cable with double insulation. oltage MX External MX x 5 x 48 RE PLUS FLOTING SWITCH RULE--MTIC With external protection against collisions, rubbles and obstacles. Special wires covering, resistant to abrasions. The wire come out of the upper part of the float. oltage MX External MX x 3 x 70 RE FLOTING SWITCH HYDRO IR Ultra reliable bilge switch. Its particular structure avoids the installation of mobile parts on the bilge. When the water level increases, the air is pulled into the pipe (length 3 m). gainst explosions (ISO 8846). The air activates the diaphragm switch which is always out of the water. oltage MX External MX Switch ON Hydro ir x 140 x RE Hydro ir x 140 x RE OFF FLOTING SWITCH WITH STINLESS STEEL SPHERE In corrosion resistant materials. Internal sphere and steel stud oltage MX External MX Sphere x 0 x 65 RE

21 CONTROL SWITCH FOR BILGE PUMPS CONTROL SWITCH FOR BILGE PUMPS In robust plastic material, waterproof. With fuse holder and 4 fuses of Carling switch with double indicator light at three position (UTO-OFF-ON). Orange indicator light: shows that automatic mode is set. Red lights: shows whenever pumps run. oltage MX Indicator lights Fuse glass IP Inlet hole Bilge master SI x 60 x x 45 RE CONTROL SWITCH FOR BILGE PUMPS In robust plastic material, waterproof. With fuse holder for glass fuse 6,3x32 (not included). 3-way switch with red led indicator. oltage MX Indicator lights Fuse glass IP Inlet hole ,3 x x 63 x x 43 RE ,3 x x 63 x x 43 RE CONTROL SWITCH FOR BILGE PUMPS Reduced dimensions. In stainless steel. 3-way toggle switch (UTO-OFF-ON). oltage MX Indicator lights Fuse glass IP Inlet hole NO NO x 51 x x 25 RE CONTROL SWITCH FOR BILGE PUMPS IP67 luminium panel with. 3-way carling switch (UTO-OFF-ON). With watertight fuse holder. Included 15 glass fuses. Max power: 20 at dc - 15 at 24dc. ertical installation. oltage MX Indicator lights Fuse glass IP Inlet hole ERTICL (15) 1 6,3 x x 95 x x 65 RE

22 WTER FILTERS WTER DEPURTION FILTER Housing in nickel brass Filter in stainless steel Cover in transparent polycarbonate vailable at 3/8, ½ and ¾ Connections l/h Materials pproval 3/8-105x99 Nickel brass RIN RE / x99 Nickel brass RIN RE / x99 Nickel brass RIN RE80089 WTER FILTERS pplications: cooling sea water They are installed on the motor water intake Body in nickel-plated brass, cover in transparent polycarbonate Stainless steel aisi 316 filter R.I.N. approvals Connections l/h Materials pproval 3 / 8 30 Ø 110 x 140 2,5 Nickel-plated brass RIN RE / Ø 110 x 140 2,5 Nickel-plated brass RIN RE / Ø 146 x Nickel-plated brass RIN RE Ø 146 x 160 3,5 Nickel-plated brass RIN RE / Ø 170 x Nickel-plated brass RIN RE / Ø 170 x Nickel-plated brass RIN RE Ø 188 x Nickel-plated brass RIN RE /2 000 Ø 230 x 280 Nickel-plated brass RIN RE Ø 230 x Nickel-plated brass RIN RE Ø 220 x Nickel-plated brass RIN RE WTER FILTERS pplications: cooling sea water They are installed on the motor water intake Body in nickel-plated brass, cover in transparent polycarbonate Stainless steel aisi 316 filter R.I.N. approvals Connections l/h Materials pproval 3 / Ø 108 x Nickel-plated brass RIN RE Ø 108 x 143 3,5 Nickel-plated brass RIN RE / Ø 134 x Nickel-plated brass RIN RE /2 000 Ø 134 x Nickel-plated brass RIN RE Ø 165 x Nickel-plated brass RIN RE

23 WTER FILTERS PUMPGURD Simply installed. Prevents unnecessary pump breakdowns. Plastic body, 40 mesh stainless steel screen. Screw off top allows quick in place cleaning and removal of debris. Transparent housing allows instant inspection. Connections Inlet hole IN LINE FILTER 13 1 / 2 Ø 9 72 x 2 x 58 RE IN LINE FILTER 19 3 / 4 Ø 13,5 72 x 2 x 58 RE IN LINE NON RETURN LES Prevent backflow of water into the bilges Simply fit into hand or electric pumps In line non-return valve for ¾ (19). RE In line non-return valve for 1 (25). RE In line non-return valve for 1 ½ (38). RE BILGE STRINERS Stop bilge debris blocking inlet suction hose Reduce the risk of debris entering and blocking the pump Re-positional ports allow horizontal, vertical or sideways hose attachment Dimension HxPxL ,1 170x72x /4 RE ,1 170x72x RE ,1 170x72x /2 RE QU FILT It absorbs dissolved impurities freshening and cleaning the water. Beneficial mineral salts are retained. Initial flow capacity up to 14 lpm. Replacement filter cartridge available on request. Item Dimension HxPxL Max bar Filter ,5 230x140x100 4,3 RE Spare part ,5 230x140x100 4,3 RE CCUMULTOR TNKS Reduce the frequency of clutch or unclutch of the pump. Regularize the water pressure of the system. Longer pump life, lower battery drain. Type Material Press Max 1,2 LITER Pressurized tank Stainless steel 7 bar Ø100 x 350 0,7 RE LITER Tank Stainless steel 7 bar Ø150 x 330 1,7 RE LITER Tank Sheet metal 10 bar Ø200 x 330 3,75 RE LITER Tank Stainless steel 10 bar Ø200 x 330 3,75 RE LITER Tank Stainless steel 10 bar Ø300 x 270 5,6 RE

24 CCESSORIES FLEXIBLE IMPELLER re subjected to usury, replace all impellers at least once every year. Blades n Diameter Ø Depth B Hole Ø C Drive type Material insert Impeller outline Material impeller ,7 1-2 Bronze G NEOPRENE RE Bronze O NEOPRENE RE , Bronze NEOPRENE RE , Bronze K NEOPRENE RE ,5 1-2 Bronze D NEOPRENE RE , Bronze M NEOPRENE RE Bronze Q NEOPRENE RE , Bronze Q NITRILE RE , Bronze Y NEOPRENE RE ,7 1-2 Bronze I NEOPRENE RE ,5 1-2 Bronze D NEOPRENE RE ELECTRONIC LES FOR FRESH WTER ¼ PORTS. Maximum pressure 5 bar Brass body, stainless steel internal sleeve pplications: wiper system and water distribution on boats Type oltage Coil absorption Hole Ø MX E-M 1 Ø 4,5 ¼ 5 bar RE E-M 24 0,55 Ø 4,5 ¼ 5 bar RE FUEL CUT-OFF SOLENOID LES Continuous duty, R.I.N. approval. Brass body and stainless steel fixing bracket. Complete with ogive pipe fittings for tubing of various diameters. Incorporating a hand release knob to open the valve manually in case of electrical failure. Type oltage Coil absorption Hole Ø Connections Ø E-M110 1 Ø 7 1/ RE E-M ,55 Ø 7 1/ RE E-M3 1 Ø 1/2" 69 RE E-M3 24 0,55 Ø 1/2" 69 RE Flow l/m ELECTRONIC LES FOR FUEL Continuous duty, UNI EN approval. Body in brass and stainless steel bracket. With BYPSS and manual emergency control. Type oltage Coil absorption Hole Ø l/h EL-0511 W Ø 7 1/2 100 l/h RE EL W Ø 7 1/2 100 l/h RE EL-0516 W Ø 7 1/2 600 l/h RE EL W Ø 7 1/2 600 l/h RE 801 EL W Ø l/h RE EL W Ø l/h RE