LUBRICATION EQUIPMENT & LUBRICANTS

Transcription

1 LUBRICATION EQUIPMENT & LUBRICANTS pump - DIESEL fuel transfer kit GPI High Volume Diesel Fuel Drum Pump High performance USA made pump Includes 6.5 metres of antistatic delivery hose Vane type pump with heavy duty cast iron pump head assembly Duty cycle of 30 minutes on, 30 minutes off 8m battery cable, quality battery clamps and lockable nozzle Voltage Curr. Draw Flow Rates Nozzle M3025-AL 12V 35 amps 85LPM Auto M3025-ML 12V 35 amps 95LPM Manual PUMP - diesel FUEL transfer Self Bundled and Portable Diesel Fuel Transfer Kit Includes a self-priming pump (delivers up to 45LPM), battery cables and switch, suction hose and delivery hose with nozzle Protects fuel transfer parts from dust and dirt contamination Collects and contains excess fuel spillage and/or drips Voltage V V PUMP - diesel refuelling Diesel Fuel Transfer Pump Vane type pump with sintered steel rotor and acetylic resin vanes is capable of flow rates of up to 72LPM 240 volt continuous running operation Built in 100 micron filter is easily accessible when cleaning is required 1 BSP inlet and outlet Cast iron, paint finished pump housing is weather resistant Ideal for diesel fuel transfer out of bulk tanks where 240 power is available : pump - diesel drum - electric Diesel Refuelling Tank Pump Inlet and outlet of 1 OD hose tails Cast iron pump body inclusive of an anti-corrosion treatment Vane type pump with sintered steel rotor and acetalic resin vanes Continuous duty electric motor protected against amperage and temperature Voltage Curr. Draw Flow Rates V 10amps 40LPM V 20amps 60LPM pump - drum - Lever Action 12V Electric Diesel Pump Auto Shut-off Nozzle Suits 60/205L drums or tanks Pumps up to 50L/min (free flow) Includes pump, suction tube, bung adaptor, power cable and clips, and nozzle * 5 year warranty * Also available with manual nozzle, and in 24V * Drum not included Item Code: GE12A-01 Lever Action Poly Drum Pump Suitable for the transfer of pesticides, herbicides, mild acids and detergents Delivers 330ml on the down stroke Polyethylene body, piston and valves with nitrile seals Robust tested to over 2 million strokes Telescopic pick up tube makes the pump suitable for 60 or 205 litre drums : V High Flow Electric Diesel Pump Auto Shut-off Suits 60/205L drums or tanks Pumps up to 75L/min (free flow) Includes pump, hoses, bung adaptor, power cable and clips and nozzle * 5 year warranty * Also available in 24V/Manual nozzle * Drum not included Item Code: GEHF12A-01 Lever Action Drum Pump Goose neck nozzle design Suitable for filling and measuring oil bottles Telescopic down tube enables the pump to suit 60L/205L drums Delivers approximately litres per stroke : 2002G 455

2 pumps - drum - lever action pump - drum - rotary action LUBRICATION EQUIPMENT & LUBRICANTS 20 Litre Drum Pumps Now capable of delivering up to 110ml per stroke Drainback nozzle holster to ensure that excess oil ends up back in the drum and not on your workshop floor Delivers lubricant and transmission fluid on the down stroke 8828N 8826N Multi Purpose Pump with 1.8m Hose Suitable for diesel, up to SAE 90 oil and other non-corrosive fluids Approx. 250mL per stroke Comes with telescopic suction tube (suits 60L to 205L drums), hose and nozzle Item Code: A2-51 For use in transferring gear oil For use in transferring ATF LITRESTROKE Manual Fuel Pump Fits 60/205L drums Pumps up to 40L/min Suitable for diesel, petrol and up to SAE 30 oils Item Code: HP-01 AdBlue Hand Pump Rotary action pump suitable for the transfer of urea/adblue at flow rates of up to 15LPM Supplied with 3 metres of delivery hose and drum adaptors Weight of 2.3kg : Polypropylene Rotary Drum Pump Flow rates of up to 20LPM Polypropylene, teflon and stainless steel construction offer excellent chemical resistance Unique, rotating 2 piece discharge spout assists fluid transfer Suitable for the transfer of herbicides, pesticides, chemicals and mild detergents Suitable for 60 or 205 litre drums : 301A Ryton Rotary Drum Pump Flow rates of up to 20 LPM Ryton and stainless steel construction provides excellent chemical compatibility Rotary action facilitates quick and effortless fluid transfer Unique, rotating 2 piece discharge spout assists fluid transfer Suitable for 60 or 205 litre drums Suitable for the transfer of low viscosity chemicals, lacquers and mild acids : 401A 456 Stainless Steel Drum Pump Delivers 500ml on the up stroke 316 stainless steel body, outlet spout and pick up tube and piston with adjustable PTFE seals Also features an adjustable outlet spout Suitable for the transfer of ammonia, ethyl acetate, methyl acetate and nitric acid up to a 50% concentration : 733 RAPIDFLO High Flow Rotary Action Fuel Pump Fits 60/205L drums Pumps over 100L/min Suitable for diesel, petrol, AV gas and up to SAE 30 oils *Also available: Biodiesel version GP-01-BD Item Code: GP-01

3 LUBRICATION EQUIPMENT & LUBRICANTS Rotary Vane Pump for 60/205L drums Fitted with 1.8m hose and nozzle Pumps up to 20L/min Suitable for diesel and oils up to SAE 90 viscosity Item Code: RVP-01 Bi-Lobe Refuelling Drum Pump with Filter Ideal for the fast and efficient transfer of diesel fuel, petrol or kerosene Flow rates up to 100LPM Includes 2.4 metres of fuel resistant hose, 10 micron fuel filter and metal nozzle Bi-lobe type pump requires minimal maintenance : 5080A pumps - drum - 12V refuelling kit Rotary Drum Pump Zinc alloy impellars make the pump suitable for the transfer of diesel fuel, petrol, kerosene, unleaded petrol and low viscosity oils Delivery rates of 18LPM or 0.26 litres per rotation Cast alloy body construction ensures a long working life and smooth operation Can syphon and transfer fuels and lubes in reverse, if and when required Includes 2.2 metres of farm tank hose, bung adaptor, rubber gasket for keeping contaminants out of your fuel and lubes, a four chamber rotor assembly, spout and spout holster : 501A Refuelling Drum Pump Rowing action drum pump capable of delivery rates of 1 litre per stroke or up to 40LPM Adjustable spout, ABS piston and polypropylene piston seals make the pump suitable for the transfer of diesel fuel, petrol, kerosene, unleaded petrol and low viscosity oils up to SAE30 Lockable handle eliminates the possibility of unauthorized fuel transfer Two piece pick up tube makes the pump suitable for fuel transfer out of 60L and 205L drums or fuel tanks up to 1000mm deep : 5005AN 12V Refuelling Kit Capable of flow rates of up to 50LPM Includes 4 metres of antistatic fuel delivery hose, 2 metres of battery cable, a stainless steel and brass fuel filter and a manual nozzle Maximum head capacity of 15 metres Self priming rotary vane pump includes a built-in bypass Duty cycle of 30 minutes on, 30 minutes off Suction capacity of up to 2 metres Ideal for intermittent diesel refuelling applications 24V kits also available : pumps - syphon Bi-Lobe Refuelling Drum Pump Flow rates of up to 100LPM Ideal for the fast and efficient transfer of diesel, fuel, petrol and kerosene Includes 2.4 metres of UV and fuel resistant hose, metal nozzle and nozzle holster to keep hose and nozzle off the ground when not in use 10 micron filter prevents contaminants from entering vehicle and machinery engines Bi-lobe design ensures low maintenance costs and easy servicing : 5060A Syphon Pumps Easy to prime and start within 6-7 strokes All pumps are equipped with a vent cap, opening the cap stops the discharge Part No Bung Type Fits Length Discharge /2 for pails 5 L / 20 L pails 533mm 6.5 LPM (2GPM) Std 2 for drums 50 L / 205 L drums 1125mm 17.5 LPM (5GPM) Std 2 for drums 50 L / 205 L drums 1155mm 21 LPM (7GPM) 457

4 pump - drum - spring operated pump - oil transfer - air LUBRICATION EQUIPMENT & LUBRICANTS Spring Operated Drum Pumps Spring operated pump and lever action oil control valve facilitates semi automatic oil transfer Includes UV stabilised hose, lever action oil control valve and drain back nozzle holster Robust zinc pump head assembly and ground shafts with O Ring seals Part No. Per Stroke Drum Size 9928 Lubricant drum pump with hose 330ml 20L 9978 Lubricant drum pump with hose 500ml 60L pump - oil transfer - hand Oil Pump Fits 20/25 L drums Approx. 100mL per stroke Suitable for up to SAE 140 oils * optional CF strainer available for ATF and hydraulic oils (C7-51) * optional zinc model available for underground mines (C ) Item Code: C7-01 5:1 Ratio Oil Transfer Drum Pump Can service up to 8 hose reels Maximum free flow of up to 35LPM 3/4 BSP (f) fluid outlet and 3/8 BSP (f) air inlet Lower air consumption reduces running costs 3:1 Ratio Oil Transfer Drum Pump Flow rates of up to 30 litres per minute Air inlet pressures between 40 and 145psi 1 2 BSP (f) fluid outlet and 1/4 BSP (f) air inlet Fewer moving parts reduces maintenance costs pump - oil transfer kit - air Oil Transfer Kit with On/Off Gun 1:1 ratio pump capable of delivery rates of up to 40LPM Ideal for the transfer of low viscosity products such as oil, waste oil, antifreeze and coolant Includes 3 metres of R1 hose, heavy duty oil control valve complete with genuine non drip nozzle and bung adaptor 3/4 BSP (f) material outlet 1/4 BSP (f) air inlet Air flow adjustment valve facilitates oil delivery rate control Suitable for use in 205 and 60 litre drums : N Suitable for bulk tank applications Suitable for 205 litre drums Suitable for bulk tank applications Suitable for 205 litre drums 458 Oil Transfer Drum Pumps Suitable for the transfer of light to medium viscosity lubricants Delivers approximately 0.45 litres per stroke Fully serviceable Telescopic downtube makes the pump suitable for 60 and 205 litre drums No delivery hose assembly and nozzle included Delivery hose assembly and nozzle included Oil Transfer Kit with Meter Includes a high quality 3:1 ratio pump, 3m x 1/2 ID hydraulic hose and an electronic resettable meter with totaliser Transfer rates of up to 15LPM 3/4 BSP (f) material outlet 1/4 BSP (f) air inlet Suitable for engine, gear, diff and hydraulic oils Suits 60 or 205 litre drums Oil transfer and metering made easy : N

5 LUBRICATION EQUIPMENT & LUBRICANTS pump - oil transfer kit - battery pumps - oil transfer kit - drum 12V Mobile Oil Transfer Kit Maximum flow rates of up to 20LPM Flow rates of up to 6LPM A built-in pressure switch allows the pump to start and stop automatically A heavy duty trolley mobilises 205 litre drums and is complete with nozzle support and drip collector The unit includes a self-priming gear pump with a 12VDC electric motor, an integrated battery charger, a heavy duty trolley 3 metres of delivery hose and an electronic oil meter : pump - oil transfer kit - mobile AdBlue 205 Litre Drum Kit Flow rates of up to 35LPM Stainless steel base easily attaches to and detaches from 205L drums 3/4 hose tail connections Kit includes heavy duty self priming 240V membrane pump, manual nozzle, 4 meter delivery hose, 1.5 meter suction hose, IBC adaptor kit and nozzle holster Weight of 15kg : pump - oil transfer - tank Mobile Oil Transfer Kit Supplied with 3:1 air operated oil pump, 8 metre hose reel, electronic meter and heavy duty drum trolley Facilitates quick, efficient and effortless oil transfer in car, light commercial vehicle and truck workshops Adjustable flow rates up to 10LPM 3:1 ratio oil pump suits 205 litre drums Electronic oil meter maximum pressure of 1,000psi : pump - oil transfer kit - stationary 240V Oil Transfer Pump Suitable for the transfer of engine, gear, diff and hydraulic oils Flow rates up to 25LPM Vane type pump with sintered steel rotor and resin vanes 3/4 BSP inlet and outlet Continuously rated with pressures up to 85psi : Stationary Pump, Reel and Meter Kit Includes a 3:1 ratio drum pump, 10 metre hose reel, electronic meter and a 2 metre pump to hose reel connection hose Adjustable flow rates of up to 10LPM 3:1 ratio pump suits 205 litre drums Electronic resettable oil meter is powered by easy to replace AAA batteries Dual pedestal hose reel withstands angular hose pull Everything you need to quickly and easily upgrade your oil dispensing and metering system : Oil Transfer Tank Pumps DC self priming gear type oil transfer pump complete with integrated by-pass valve Flow rates of up to 10LPM Operating pressures up to 70psi 3/4 BSP (f) inlet and outlet V V 459

6 MACHINERY & WORKSHOP EQUIPMENT pumps - pressure PUMPS WATER Bianco Pressure Pumps Fully electronic, auto control starts automatically when a tap is turned on, Operates constantly from low to full flow. Stainless Steel. 2 Year Warranty. Taps BIA-INOX120PC Bianco Pump 1200w 240V 5-6 Taps BIA-INOX60PC Bianco Pump 600w 240V 3-4 Taps BIA-INOX80PC Bianco Pump 800w 240V 4-5 Taps pump - submersible High Pressure Water Pump 3 way discharge port Self priming High flow rate with strong pressure Complete with suction and discharge hose Ideal for fire protection or high head water transfer 2 year warranty : KGP15H punches - bench - sheetmetal Dab Submersible Pump Reinforced inert plastic body - non-corosive for long life. Built in rigid float activated automatic switch - factory set for reilable operation, eliminate float cable failure. Stainless Steel shaft and screws - corrosion resistant for longer life. Repairable - longer service life. Ball bearings - longer life and quiet operation. Ground rotor shaft, triple lip seals in oil chamber - longer seal and pump life. 2 Year warranty - parts and labour. Bench Punch For punching holes in sheetmetal. Punches and Dies made from high quality tool steel. Part No. Punch Diameters Material Thickness PUNCH 3, 4, 5, 6, mm up to 2.5 mm punch - hydraulic HS DAB-NOVA180A DAB Pump Submersible 0.22kW 0.3hp 240V - Automatic Nitto Hydraulic Punches Applicable for both mild steel and stainless steel punching Auto return (automatic operation) and Inching function (manual operation) Will punch both round and elongated holes Selfer Hydraulic Pump HPD-05 is required to operate units Additional 25mm Lock Nut is required for HS and HS Max. Punching Model Punching Throat Thickness Weight Number Capacity Depth Mild Steel Stainless HS mm 16mm 6mm 110mm 30.0 kg HS mm 16mm 6mm 70mm 25.5 kg HS mm 13mm 6mm 60mm 20.5 kg Bianco Submersible Pumps Suitable for all de-watering tasks including pumping out sumps, flooded areas and draining water from wells. Domestic use only. Light and compact, fully automatic operation. Great value for money. 10m cable, 12 months waranty. BIA-JH400 BIA-JH550 BIA-JH550B BIA-JH750B BIA-JH900 Bianco Pump Submersible 400w 240V Bianco Pump Submersible SS 550w 240V Bianco Pump Submersible 550w 240V VORTEX Bianco Pump Submersible SS 750w 240V VORTEX Bianco Pump Submersible 900w 240V roll grooving Roll Groover Manual roll groover built for solid reliable field applications. Requires only 3 1/2 of clearance to travel around a pipe and a minimum of 2 3/4 of exposed pipe for grooving. Can groove from 1 1/4 top 12 pipe. :

7 pumps - hydraulic pump - hydraulic - hand HPD-05 Nitto Selfer Hydraulic Pump lnching and auto function Twin line hydraulics for speed and efficiency Required to operate Selfer Ace punching heads HS , HS , HS MACHINERY & WORKSHOP EQUIPMENT Model Number Output Flow L / min No Load Load Weight HPD kg pump - hydraulic - air Z Series Air-Hydraulic Pumps Air is used to power this range of hydraulic pumps, with a treadle controlling advance, retract and hold functions, providing a power operated pump at a cost-effective price. Model ZR12107 and ZR14007 are supplied with remote pendant, to allow a wider security area. Product Number Configuration Reservoir Capacity Max Pressure Flow Rate at 20 bar* Flow Rate at 700 bar* Z12107 S 2.1 litre 700 bar 0.9 l/min 0.2 l/min Z12107/A S A 2.1 litre 700 bar 0.9 l/min 0.2 l/min Z12110 S 2.1 litre 1000 bar 0.9 l/min 0.2 l/min Z14007 S 4.0 litre 700 bar 0.9 l/min 0.2 l/min Z17007 S 7.0 litre 700 bar 0.9 l/min 0.2 l/min Z22107 D 2.1 litre 700 bar 0.9 l/min 0.2 l/min Z22107/A D A 2.1 litre 700 bar 0.9 l/min 0.2 l/min Z24007 D 4.0 litre 700 bar 0.9 l/min 0.2 l/min Z24007/A D A 4.0 litre 700 bar 0.9 l/min 0.2 l/min Z27007 D 7.0 litre 700 bar 0.9 l/min 0.2 l/min Z27007/A D A 7.0 litre 700 bar 0.9 l/min 0.2 l/min ZR12107 SR 2.1 litre 700 bar 0.9 l/min 0.2 l/min ZR14007 SR 4.0 litre 700 bar 0.9 l/min 0.2 l/min ZR17007 SR 7.0 litre 700 bar 0.9 l/min 0.2 l/min Hand Operated Hydraulic Pumps, 700 bar output A range of 700 bar output hydraulic hand pumps in configurations for single acting or double acting cylinders. Tank sizes from 0.24 litres to 7.5 litres Code: D: double acting. S: single acting. SP: single acting foot treadle Reservoir Oil Flow per Stroke Product Configuration Capacity Number at 20 bar at 700 bar Litre cm 3 cm 3 W00307 S W10707 S W20707 S WP01207 SP W11207 S W21207 S W22307 S W24307 S W07807 S X22307 D X24307 D X07807 D porta power kits Body Repair Kit 10 tonne For use in the garage, workshop and panel beaters. Multi-purpose hydraulic kit Contents: 10 tonne pump, hose, ram, wedge ram, 4 x extensions, extension joiner, 7 x ends to suit a variety of positions and applications : Air Hydraulic Pump 10,000psi Light-weight corrosion-free aluminium Built-in overload system Pump / release pedal / filter : 2054 Porta Power Kit 10,000kg 14 piece incl. pump, hose and fittings Max. lifting height: 150mm Cylinder min. height: 367mm Nett weight: 37kg : 2005