2100_2180 UNI_VERSO DESIGN BY NORBERT GEELEN

Transcription

1 2100_2180 UNI_VERSO DESIGN BY NORBERT GEELEN For enthusiasts of natural materials: the universal chair made of wood and metal. The anatomically shaped wooden seat shell is the centrepiece of this design, featuring lateral cut-outs between the seat and back. Available with optional upholstered pads. Through its many variations, this collection offers the perfect solution for a plethora of contract environments. This series is closely related to 2000 uni_verso which features a plastic seat shell with matching design aesthetics. CONTENT Variations 2 Product data 6 Materials, finishes 14 Solutions 15 Quality, sustainability 16 References 17 After having completed his training as industrial designer at the University of Essen, Norbert Geelen started freelancing at the Italian Studio Mattheo Thun in Milan. Together with his partner Robert Kilders, he founded the design studio bert&bert in Since 2005, Norbert Geelen feels at home both in his German office in Straelen and in his Milan studio. He has specialised in designing upmarket lifestyle products and furniture. KUSCH.COM

2 VARIATIONS 2100 FOUR-LEGGED FRAME A genuine all-rounder: both side chair and armchair with its elegantly designed metal armrests can be stacked and linked together. In addition, the stacking chair resp. stacking armchair is available with a high back. The four-legged model, whether with or without upholstered pads, offers an excellent comfort level. The writing tablet is optional SLED BASE Just like its four-legged counterpart, the sledbase chairs are characterised by a subtle use of sweeping lines and visual lightness. The writing tablet is optional CANTILEVER These variations offer the typically high level of comfort that only a cantilever frame can provide. Both dynamic and elegant. The cantilever armchair either comes with a standard or high back. All variations are also available with a stacking cantilever frame _2180 UNI_VERSO

3 2140 / 2150 FOUR-PRONG BASE The entirely upholstered chairs and armchairs either feature a swivelling seat on a base with glides or a fixed seat on a base with castors. Ideally suited for conference rooms and offices. The armchair is also available with a high back WOODEN LEGS The four wooden legs seem to be sprouting from the side chair s or armchair s centre. Natural beech legs as standard; high-grade natural oak or walnut legs are optional / 2180 BAR STOOL The entirely upholstered seat shell with its low back rests on a high frame, featuring either metal or wooden legs. The metal bar stool frame can also be combined with the standard-issue unupholstered wooden seat shell. KUSCH.COM 3

4 VA R I AT I O N S F O U R - L E G G E D F R A M E Seat shell beech 2100/2, 2100/2H 2106/4, 2106/4H Seat shell beech, upholstered seat pad 2102/2 2108/4 Seat shell beech, upholstered seat/back pad 2105/2 2109/4 Entirely upholstered seat shell 2104/2, 2104/2H 2174/2 2107/4, 2107/4H 2177/4 2100/0 2100/ S L E D BAS E 2100/0 2100/0 Seat shell beech 2120/2 Seat shell beech, upholstered seat pad 2122/2 Seat shell beech, upholstered seat/back pad 2125/2 Entirely upholstered seat shell 2124/ C A N T I L E V E R Seat shell beech 2130/1 2130/2 2136/3 2136/4 Seat shell beech, upholstered seat pad 2132/1 2132/2 2138/3 2138/4 Seat shell beech, upholstered seat/back pad 2135/1 2135/2 2139/3 2139/4 Entirely upholstered seat shell 2134/1 2134/2 2137/3 2197/3 2137/4 All variations, whose model numbers end with the letter H, meet the standards of the kuschmed Hygienic-Line. For more information, please go to the Solutions section _ U N I _ V E R S O 2197/4

5 / F OU R - P RO N G BAS E Entirely upholstered seat shell 2144/1 2147/3 2144/3 2154/1 2157/3 2154/ WOO D E N L E G S Seat shell beech 2180/1 Seat shell beech, upholstered seat pad 2182/1 Seat shell beech, upholstered seat/back pad 2185/1 Entirely upholstered seat shell 2184/ / B A R S T O O L 2100/0 2100/0 2100/0 Seat shell beech Entirely upholstered seat shell 2100/0 2100/0 2102/0 2182/0 KUSCH.COM 5

6 PRODUCT DATA 2100 FOUR-LEGGED FRAME ACCESSORIES Black plastic arm pads Extractable clip linking, side chair / side chair, side chair / armchair, armchair / armchair (not for models with high back) Row numberplate holder with numberplate (not for models with high back) Seat number stuck into the back (not avaible for all models with upholstered back pad) Seat number screwed to the back (for models with upholstered back pad) Writing tablet Plastic glides Felt glides Metal glides Protect glides Optional seat height 42 cm, 50 cm or 55 cm / Weight: kg depending on model Weight: kg depending on model / Weight: 6.5 kg Weight: 7.5 kg 1 The DIN seat height was determined acc. to DIN EN , i.e. the seat height measured by means of a measuring device at the position of the ischial tuberosity (sitting bones) after having placed a load of 50 kg on the half width of the seat. 2 unupholstered Extractable clip linking upholstered, entirely upholstered Dimensions in cm Extractable clip linking in combination with writing tablet _2180 UNI_VERSO

7 2100 FOUR-LEGGED FRAME STACKABILITY Stackable on dolly 1011/ 8: 10 units Stackable on dolly 3980 / 8: 8 units Stackable on dolly 3981/ 8: 10 units Stackable on dolly 3880 / 8: 8 units Mixed stacks of side chairs and armchairs possible STACKING UNUPHOLSTERED 10 units Height plus 3 cm per stacking side chair / armchair Depth plus 2.5 cm per stacking side chair / armchair 74.5 STACKING UPHOLSTERED 8 units Height plus 5 cm per stacking side chair / armchair Depth plus 3 cm per stacking side chair / armchair STACKABILITY HIGH BACK Stackable on dolly 1011/ 8: 8 units Stackable on dolly 3980 / 8: 7 units 81 Stackable on dolly 3981/ 8: 8 units Stackable on dolly 3880 / 8: 6 units Mixed stacks of side chairs and armchairs possible Up to 6 units can be stacked on a straight surface 122 Height plus 5 cm per stacking side chair / armchair Depth plus 4 cm per stacking side chair / armchair WRITING TABLET / 76* Removable writing tablet Models can only be stacked with removed writing tablet Side chairs and armchairs with mounted writing tablet are linkable with extractable clip linking Writing tablet for right- or left-handed * high back KUSCH.COM 7

8 PRODUCT DATA 2120 SLED BASE ACCESSORIES Seat number milled in the back (not available for all models with upholstered back pad or entirely upholstered seat shell) Seat number screwed to the back (for models with upholstered back pad or entirely upholstered seat shell) Writing tablet Plastic glides Felt glides Linking elements for plastic or felt glides , / Weight: kg depending on model Linking element for glides The DIN seat height was determined acc. to DIN EN , i.e. the seat height measured by means of a measuring device at the position of the ischial tuberosity (sitting bones) after having placed a load of 50 kg on the half width of the seat. 2 unupholstered 3 upholstered, entirely upholstered Dimensions in cm _2180 UNI_VERSO

9 2120 SLED BASE STACKABILITY Stackable on dolly 1011/ 8: 10 units Stackable on dolly 3980 / 8: 10 units Stackable on dolly 3880 / 8: 10 units STACKING UNUPHOLSTERED 12 units Height plus 3.5 cm per stacking side chair Depth plus 2.5 cm per stacking side chair STACKING UPHOLSTERED 10 units Height plus 4.5 cm per stacking side chair Depth plus 2.5 cm per stacking side chair WRITING TABLET Removable writing tablet Models can only be stacked with removed writing tablet Writing tablet for right- or left-handed KUSCH.COM 9

10 PRODUCT DATA 2130 CANTILEVER ACCESSORIES Beech arm pads Leather arm pads Plastic glides Felt glides Protect glides / / 3 2 / Weight: kg depending on model Weight: kg depending on model Weight: 9.5 kg 1 The DIN seat height was determined acc. to DIN EN , i.e. the seat height measured by means of a measuring device at the position of the ischial tuberosity (sitting bones) after having placed a load of 50 kg on the half width of the seat. 2 unupholstered 3 upholstered, entirely upholstered 4 cantilever side chair 5 cantilever stacking side chair Dimensions in cm _2180 UNI_VERSO

11 2130 CANTILEVER STACKABILITY Applies only to stacking side chairs / armchairs Stackable on dolly 1011/ 8: 6 units Stackable on dolly 3980 / 8: 5 units Stackable on dolly 3880 / 8: 5 units Mixed stacks of side chairs and armchairs possible STACKING UNUPHOLSTERED 6 units Height plus 4 cm per stacking side chair / armchair Depth plus 3 cm per stacking side chair / armchair 68 STACKING UPHOLSTERED 5 units Height plus 5 cm per stacking side chair / armchair Depth plus 4 cm per stacking side chair / armchair STACKABILITY HIGH BACK Applies only to stacking armchairs Stackable on dolly 1011/ 8: 5 units Stackable on dolly 3980 / 8: 5 units Stackable on dolly 3981/ 8: 5 units Stackable on dolly 3880 / 8: 5 units Up to 5 units can be stacked on a straight surface Height plus 5 cm per stacking armchair Depth plus 4 cm per stacking armchair KUSCH.COM 11

12 PRODUCT DATA 2140 / 2150 FOUR-PRONG BASE ACCESSORIES Arms covered with black greased leather Plastic glides Plastic glides nonskid Felt glides Stainless steel cap for glides Black castors Castors with chrome-plated ring Weight: 7.5 kg Weight: 7.5 kg Ø 5 Ø Ø 5 Ø Ø 5 68 Ø 5 68 Ø Ø Weight: 10.0 kg Weight: 10.0 kg Ø 5 68 Ø The DIN seat height was determined acc. to DIN EN , i.e. the seat height measured by means of a measuring device at the position of the ischial tuberosity (sitting bones) after having placed a load of 50 kg on the half width of the seat. 2 unupholstered 3 upholstered, entirely upholstered Dimensions in cm Ø Weight: 11.5 kg Ø Weight: 12.0 kg _2180 UNI_VERSO

13 2180 WOODEN LEGS ACCESSORIES Plastic glides Felt glides Metal glides Protect glides / 3 84 Weight: kg depending on model 2100 / 2180 BAR STOOL ACCESSORIES Plastic glides Felt glides Metal glides (only for wooden legs) Protect glides (only for wooden legs) , Weight: 7.5 kg Weight: 7.5 kg Weight: 7.0 kg KUSCH.COM 13

14 MATERIALS, FINISHES SIDE CHAIR / ARMCHAIR / BAR STOOL SEAT SHELL Natural beech or stained acc. to our standard collection UPHOLSTERY Optionally with upholstered seat pad, upholstered seat / back pad or entirely upholstered seat shell, fabric from standard collection (2140/ 2150 only available with entirely upholstered seat shell) Optionally available with upholstery with flame retardant foam resp. flame retardant foam and fireproof fabric FRAME, ARMS Powder coated, protective lacquer aluminium powder coated, bright chrome or satin chrome steel (four-legged frame, sled base, cantilever, steel arms) Powder coated, polished or bright chrome aluminium four-prong base Bright chrome or satin chrome frame and footrest (bar stool) Arms optionally with black plastic pads (four-legged frame) Arms optionally with natural or stained beech pads ( cantilever) Arms optionally with leather pads (cantilever) Arms optionally covered with black greased leather (four-prong base) WOODEN LEGS Natural beech or stained acc. to our standard collection Optional high-grade wood natural oak or walnut Powder coated leg mounting HIGH-GRADE WOOD LAMINATE HPL oak* * Only for wooden legs walnut* silver grey for writing tablets BEECH STAINS K BEECH STAINS S POWDER COATING natural beech maple K 01 cream K 04 white S 40 lemon S 33 tangerine S 34 RAL 9003 signal white RAL 9006 white aluminium (metallic effect) silver 98 (metallic effect) oak K 40 tobacco K 02 terra K 03 strawberry S 35 maroon S 32 kiwi S 36 DB 703 iron mica RAL 9005 jet black silk sienna K 10 (P 10) puce K 11 (P 11) midnight blue S 38 light grey S 39 black S _2180 UNI_VERSO

15 SOLUTIONS EXCERPT REDUCED MOBILITY Depending on the environment, contract seating has to be able to fulfil very specific requirements. Interior designers and planners sometimes have to clear difficult hurdles: such as exacting fire prevention or hygiene regulations, or taking the needs and wishes of persons with reduced mobility into consideration. Kusch+Co has worked out individual solutions: FIRE PREVENTION WOODEN PARTS As standard, wooden parts are protected by a UV curing, environmentally harmless, waterbased lacquer meeting all the requirements of "low flammability" acc. to DIN EN C s2 d0. UPHOLSTERY The upholstery is optionally available with flame retardant foam. In addition, it is available with the Kusch+Co Fire Prevention Concept, consisting of a special fabric "flamline" (approved by the building authorities and conforms to DIN 4102 A2 non-flammable) between the upholstery foam and the fabric. This concept achieves four life-saving objectives. The seating: is self-extinguishing reduces the smoke development prevents an incipient fire from spreading out does not turn into an additional ignition source. Test reports in compliance with national and international standards document the laboratory fire tests conducted on different series finished with a wide variety of materials. With regard to the upholstery, e.g. with leather, artificial leather as well as many textile fabrics, or to our unupholstered variations featuring a plywood, laminated or plastic seat shell, most of our series meet the following standards: Germany: DIN P-a France: NFD Great Britain: BS 5852 Crib 5 Italy: UNI 9176 Europe: DIN EN 1021 part 1/ 2 Please contact us if you wish to receive the test reports. HYGIENE Products from kuschmed Hygienic-Line provide an unfavourable breeding ground for bacteria, germs, and mildew. For this purpose, this range is conceived without open-pored veneers, slits in the backrest, improper upholstery, finger traps, open frames, felt glides, or materials that degrade upon contact with disinfectants. Only fabrics with specific properties, e.g. hygienically impervious fabrics as well as water- and dirt-repellent finishes, qualify for this product line. Fabrics made of nano- coated fibres as well as disinfectant-compatible fabrics are also used. The surfaces have to be smooth and pore-free, impervious to liquids and germs, and growthinhibiting for bacteria. All wooden surfaces are entirely sealed with a special high-density, pore-free and disinfectant-resistant lacquer with antibacterial properties. Metal surfaces are sealed with a chrome finish or with a silverbearing, antibacterial powder coating. The silver ions within the coating are acti vated upon contact with bacterial colonies, diffusing at the surface, denaturating the cell walls of the bacteria, and thus inhibiting their growth. Many people experience mobility difficulties, among them are senior citizens, pregnant women, persons of short stature, as well as persons with an individual disability. Sitting can be quite a hurdle, as they may have difficulties in taking a seat or getting up from normal seating. In this case, the standard seat height of 42 or cm is usually too low. Seating has to fulfil the following requirements for persons with reduced mobility: Seat height of at least 48 cm Seat surfaces enabling them to sit upright and to get up more easily Stable arms providing good support The legs should be positioned as vertically as possible, so that they don t become a tripping hazard Next to the standard seat height of cm, all four-legged variations of the series uni_verso are available with an optional seat height of 42 cm, 50 cm or 55 cm. On top of this, they feature stable armrests and nearly perpendicular legs, and enable an upright posture. Up to a seat height of max. cm, the four-legged variations are capable of carrying a body weight up to 150 kg. For more information, we refer to our brochure "Solutions" please contact us to receive your copy. KUSCH.COM 15

16 Umwelterklärung nach ISO 14021, Typ II in compliance with ISO 14021, type II Umwelterklärung nach ISO 14021, Typ II in compliance with ISO 14021, type II QUALITY, SUSTAINABILITY EXCERPT QUALITY SUSTAINABILITY Our environmental and quality management systems are certified acc. to DIN EN ISO and to DIN EN ISO External audits as well as our in-house laboratory safeguard our quality level. All variations of series 2100_2180 uni_verso meet the requirements with regard to stability, static and dynamic load as well as strength and durability in compliance with the current European Directives, standards and regulations. On top of this, we test most of our contract seating with higher loads and cycles. On request, we conduct individual tests acc. to the customer s specifications. In our capacity as a DIN EN ISO 9001 certified company, we are authorised to test in our own laboratory whether our products meet the GS requirements for Tested Product Safety and issue a Declaration of Conformity equiv alent to a GS sign. We happily make these Declarations of Conformity as well as our brochure "Mission Statement Quality" providing detailed information on our test procedures available to you please contact us. 2180/1, 2182/0, 2182/1, 2184/1, 2185/1 Kusch+Co products stand for long life cycles and optimum recyclability. From the first design drafts of a new product, we take all environmental-relevant components and production processes into consideration, ranging from the materials selection and the design all the way to the manufacturing processes which also contribute towards our sustainable energy balance. DQS-certified Environmental Product Declarations are available for all series, compiled conform to DIN EN ISO Type II, providing more information about all environmentally relevant aspects, including the Credit Points for the LEED certification of a building. Please contact us for more information. STATIC LOAD DIN EN Level 1 (= DIN EN 13761) kg kg kg DIN EN Level 2 (= DIN EN Level 3) kg kg kg 2100 UNI_VERSO ENVIRONMENTAL ASPECTS ENVIRONMENTAL LIFE CYCLE RESPONSIBILITY 1 MATERIALS Long before the production of a new series, Kusch+Co starts The models of series 2100 thinking about the possible environmental impact of the production mate rials (lead, mercury, pvc). uni_verso are free from hazardous processes and the required components. uni_verso comply with the legal All components of series 2100 PAH standards. Kusch+Co uses CFC- and formaldehyde-free foam only that meets SUSTAINABILITY the Oeko-Tex Standard 100. Kusch+Co understands sustainability as the realistic, manageable we use aqueous dispersion adhe- To the greatest possible extent, and economically viable combination sives free from organic solvents of environmental protection, economics and CSR, not only in terms shells/seat. Smallest amounts of to glue the foam pads to the seat of production, but also how we solvent-based adhesives are indispensable for technical reasons; communicate with our fellow men, our staff members and partners. however, direct contact with the Sustainability cannot be measured, skin is impos sible. but it can be sensed. All plastic parts are labelled properly for recycling. All wood products originate QUALITY ASSURANCE from sustainable, legal and verified sources. In order to guarantee a constant Series 2100 uni_verso contains high-level product quality, no substances included on the Kusch+Co is certified in accor- candidate list for authorisation d ance with the quality manage- according to 57 of Regulation ment system DIN EN ISO 9001 (EC) No 1907/2006 ("REACH") and the environmental management system DIN EN ISO We offer a 5-year warranty as standard. 2 PRODUCTION METAL COATING The powder coating is free from volatile organic compounds (VOC) and heavy metals and therefore physiolo gically harmless. Our chrome- plating finish excels in corrosion protection and is physiologically harmless during the production and the service life of series 2100 uni_verso. We do not use perfluorinated surfactants (PFS) for our chrome-plating, as these surfactants are suspected of being carcinogenic. LACQUER FINISH ON WOOD Through the use of UV-curing water-based lacquers in conjunction with a new lacquering line featuring a paint-spray robot with electrostatic spraying guns (since April 2014), we were able to reduce the overspray to an absolute minimum. On top of this, our paint-spray cabins have been retrofitted with a dry filtration s ystem, replacing the wet extraction system, and saving energy and water. The dry filter achieves the best possible result in collecting the overspray, which can be treated like regular household waste when dried. The used UV-curing, water-based lacquers are exempt of PAHs and any other harmful substances. Environmental Product Declaration WASTE MANAGEMENT All types of process waste (fabric remnants, foam, metal tubes) are collected by professional waste processing companies and 100 % recycled. All wood residues, resulting from woodworking, are used to heat the factory, saving precious heating oil. 3 TRANSPORTATION The transportation energy is offset by the spacesaving packaging. The packaging material is reused before it is recycled. Kusch+Co s dual disposal system is certified by Interseroh. Approximately 20 tonnes of packaging material is recycled every year. 4 USAGE In order to simulate the conditions of a 12-year service life, the series 2100 uni_verso was tested for the GS mark for Product Safety with increased test cycles compared to the relevant norms. A long service life is guaranteed with most parts being exchangeable and retrofittable. That is our contribution to an efficient resource management 2180 UNI_VERSO ENVIRONMENTAL ASPECTS ENVIRONMENTAL LIFE CYCLE RESPONSIBILITY 1 MATERIALS Long before the production of a new series, Kusch+Co starts The models of series 2180 thinking about the possible environmental impact of the production mate rials (lead, mercury, pvc). uni_verso are free from hazardous processes and the required components. uni_verso comply with the legal All components of series 2180 PAH standards. Kusch+Co uses CFC and formaldehyde free foam only that meets SUSTAINABILITY the Oeko Tex Standard 100. Kusch+Co understands sustainability as the realistic, manageable we use aqueous dispersion adhe To the greatest possible extent, and economically viable combination sives free from organic solvents of environmental protection, economics and CSR, not only in terms shells/seat. Smallest amounts of to glue the foam pads to the seat of production, but also how we solvent based adhesives are indispensable for technical reasons; communicate with our fellow men, our staff members and partners. however, direct contact with the Sustainability cannot be measured, skin is impos sible. but it can be sensed. All plastic parts are labelled properly for recycling. All wood products originate QUALITY ASSURANCE from sustainable, legal and verified sources. In order to guarantee a constant Series 2180 uni_verso contains high level product quality, no substances included on the Kusch+Co is certified in accor candidate list for authorisation d ance with the quality manage according to 57 of Regulation ment system DIN EN ISO 9001 (EC) No 1907/2006 ("REACH") and the environmental management system DIN EN ISO We offer a 5 year warranty as standard. 2 PRODUCTION METAL COATING The powder coating is free from volatile organic compounds (VOC) and heavy metals and therefore physiolo gically harmless. LACQUER FINISH ON WOOD Through the use of UV curing water based lacquers in conjunction with a new lacquering line featuring a paint spray robot with electrostatic spraying guns (since April 2014), we were able to reduce the overspray to an absolute minimum. On top of this, our paint spray cabins have been retrofitted with a dry filtration s ystem, replacing the wet extraction system, and saving energy and water. The dry filter achieves the best possible result in collecting the overspray, which can be treated like regular household waste when dried. The used UV curing, water based lacquers are exempt of PAHs and any other harmful substances. Environmental Product Declaration WASTE MANAGEMENT All types of process waste (fabric remnants, foam, metal tubes) are collected by professional waste processing companies and 100 % recycled. All wood residues, resulting from woodworking, are used to heat the factory, saving precious heating oil. 3 TRANSPORTATION The transportation energy is offset by the spacesaving packaging. The packaging material is reused before it is recycled. Kusch+Co s dual disposal system is certified by Interseroh. Approximately 20 tonnes of packaging material is recycled every year. 4 USAGE In order to simulate the conditions of a 12 year service life, the series 2180 uni_verso was tested for the GS mark for Product Safety with increased test cycles compared to the relevant norms. A long service life is guaranteed with most parts being exchangeable and retrofittable. That is our contribution to an efficient resource management 5 WASTE DISPOSAL 5 WASTE DISPOSAL At the end of their service life, the models of series 2100 uni_verso can be disassembled by our professional workers who will separate the materials correctly by type. The models of series 2100 uni_verso are recyclable to approx. 97 %. The recyclability is exclusive of adhesives, grease, oil, small parts and screws. At the end of their service life, the models of series 2180 uni_verso can be disassembled by our professional workers who will separate the materials correctly by type. The models of series 2180 uni_verso are recyclable to approx. 98 %. The recyclability is exclusive of adhesives, grease, oil, small parts and screws. 97 % 98 % Kusch+Co GmbH & Co. KG P.O. Box Hallenberg Germany T F welcome@kusch.com kusch.com Kusch+Co GmbH & Co. KG P.O. Box Hallenberg Germany T F welcome@kusch.com kusch.com _2180 UNI_VERSO

17 REFERENCES EXCERPT BELGIUM Residential care and nursing home Paradijs, Lier BRAZIL Beneficência Portuguesa de São Paulo Pharmaceutical Industry, São Paulo GERMANY Bavarian Academy of Music, Marktoberdorf Clinic Bremen-Nord Clinic Main-Spessart, Lohr Clinic Sonnenblick, Marburg DB Gastronomie GmbH, Frankfurt am Main Deutsche Vermögensberatung AG Investment Company, Braak Friedrich-Loeffler-Institut, Federal Research Institute for Animal Health, Greifswald Google, Berlin Groupon GmbH, Berlin Health Insurance Company Techniker Krankenkasse, Hamburg Metall NRW, Employers Association of the Metal and Electrical Industries, Düsseldorf Musterring, Rheda-Wiedenbrück Neckar-Odenwald-Kliniken ggmbh, Mosbach Rehabilitation Centre Oldenburg Rolls-Royce MTOC GmbH, Dahlewitz Rotonda Restaurant, Cologne South Westphalia Music Academy, Schmallenberg Bad Fredeburg University Hospital Bergmannsheil, Bochum WECO Feuerwerk GmbH, Eitorf PALESTINE Bethlehem University, Ramallah SLOVAKIA XIMEA s.r.o., Bratislava SWITZERLAND Fondation du Home du Glarier, Sion UNITED ARAB EMIRATES Marriott Courtyard Hotel, Abu Dhabi USA BASF, New York Fairport Public Library Groupon GmbH, Berlin KUSCH.COM 17

18 REFERENCES EXCERPT Musterring, Rheda-Wiedenbrück Rotonda Restaurant, Cologne _2180 UNI_VERSO

19 Deutsche Vermögensberatung AG Investment Company, Braak South Westphalia Music Academy, Schmallenberg Bad Fredeburg KUSCH.COM 19

20 Design by Schober Design Concept, text, layout by Filusch & Fiore Werbeagentur GmbH Print by msp druck und medien gmbh 04/2016/0.5 EN Subject to technical modifications / colour variations Printed on MultiArt Silk PEFC certified Kusch+Co GmbH & Co. KG P.O. Box Hallenberg Germany T F welcome@kusch.com KUSCH.COM