STANDARDIZATION ORGANIZATION FOR GCC (GSO)
|
|
- Allyson Owens
- 5 years ago
- Views:
Transcription
1 STANDARDIZATION ORGANIZATION FOR GCC (GSO) Final draft GSO5 / FDS.: 2013 Oil of lavender (Lavandula angustifolia Mill.) Prepared by: Gulf technical committee for sector standards of Food and agriculture products This document is a draft Gulf standard circulated for comments, it is therefore, subject to alteration and modification, and may not be referred as a Gulf standard, until approved by the Board of Directors. ICS:
2 Foreword GCC Standardization Organization (GSO) is a regional Organization which consists of the National Standards Bodies of GCC member States. One of GSO main functions is to issue Gulf Standards/ Technical regulations through specialized technical committees (TCs). GSO through the technical program of committee TC No.(5) Gulf technical committee for sector Standards of Foods and Agricultural products has prepared the oil of lavender ". The draft Standard has been prepared by State Gulf Standard for " of Qatar. This Standard has been approved as a Gulf Technical Regulation by GSO Board of Directors in its meeting No. ( ), held on / / H, / / G.
3 Oil of lavender 1-Scope: This Gulf Standard is concerned with specifies characteristics of lavender oil to facilitate assessment of its quality. 2-Complementary references: 2.1 GSO/ISO/TR 210, Essential oils General rules for packaging, conditioning and storage 2.2 GSO/ISO/TR 211, Essential oils General rules for labelling and marking of containers 2.3 GSO/ISO 212, Essential oils sampling 2.4 GSO/ISO 279, Essential oils Determination of relative density at 20 C Reference method 2.5 GSO/ISO 280, Essential oils Determination of refractive index 2.6 GSO/ISO 592, Essential oils Determination of optical rotation 2.7 GSO/ISO 709 Essential oils Determination of ester value. 2.8 GSO/ISO 875, Essential oils Evaluation of miscibility in ethanol 2.9 GSO/ISO 1242, Essential oils Determination of acid value 2.10 GSO/ISO , Essential oils General guidance on chromatographic profiles Part 1: Preparation of chromatographic profiles for presentation in standards 2.11 GSO/ISO , Essential oils General guidance on chromatographic profiles Part 2: Utilization of chromatographic profiles of samples of essential oils 3- Definitions: Oil of lavender: Is essential oil obtained by steam distillation of the recently cut flowering tops of Lavandula angustifolia Mill., 4- Characteristics: The following characteristics shall be met in essential lavender oil: 4.1 It shall be oily texture liquid at 20 C. 1
4 4.2 It shall be pale yellow. 4.3 It shall have the characteristics taste and odour for lavender flowers. 4.4 The relative density for the oil shall be range from at 20 C. 4.5 The refractive index for the oil shall be range from at 20 C. 4.6 The optical rotation for the oil shall be range from ( ) to (-7 ) at 20 C. 4.7 One volume of the oil shall be miscibility in not more than two volumes of 75% ethanol at 20 C, except the France type,it should be three volumes from it to obtained a clear solution. 4.8 Acid value for the oil shall not exceed Ester value for the oil shall be ranged between calculated as linalyl acetate The characteristic component of the oil shall be according to what mentioned in Table No. (1), when determined these components by gas chromatography. Table No. (1) Characteristic component of lavender oil Component Minimum % Maximum % Linalyl acetate Linalol Cis-β- Ocimene 3 10 trans-β- Ocimene The mean value for flash point is + 71 C obtained with Luchaire equipment. 5- Sampling: Samples shall be taken according to Gulf Standard stated in Item (2.3), minmum volume for test sample shall not less than 25 ml. Note: This volume allows each of the tests specified in this Gulf Standard to be carried out at least one. 6- Methods of examination and test: 6.1 Relative density for the oil shall be determined according to Gulf Standard stated in Item (2.4). 2
5 6.2 Refractive index for the oil shall be determined according to Gulf Standard stated in Item (2.5). 6.3 Optical rotation for the oil shall be determined according to Gulf Standard stated in Item (2.6). 6.4 Miscibility in ethanol for the oil shall be determined according to Gulf Standard stated in Item (2.8). 6.5 Acid value for the oil shall be determined according to Gulf Standard stated in Item (2.9). 6.6 Ester value for the oil shall be determined according to Gulf Standard stated in Item (2.7). Test portion: 2 g. Saponification time: 30 minutes Molecular mass of linalyl acetate: The characteristic component of the oil shall be determined according to Gulf Standards stated in Item ( ). 7- Packaging, transportation and storage: Packaging, transportation and storage shall be carried out according to Gulf Standard stated in Item (2.1). 8- Labelling: Labels on product label shall be complying with what mentioned in Gulf Standard stated in Item (2.2). 3
التقييس لدول مجلس التعاون لدول الخليج العربية
هيي ة التقييس لدول مجلس التعاون لدول الخليج العربية STANDARDIZATION ORGANIZATION FOR G.C.C (GSO) ا طارات سيارات الركوب الجزء الثاني : المتطلبات العامة PASSENGER CAR TYRES PART 2: GENERAL REQUIREMENTS ICS:
More informationEAST AFRICAN STANDARD
DEAS 186:2013 ICS 71.100.40 Toilet soap Specification EAST AFRICAN STANDARD EAST AFRICAN COMMUNITY HS 3401.11.0000 EAS 2013 Second Edition 2013 Table of contents 1 Scope... 1 2 Normative references...
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB17930-2016 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2016 Replacing
More informationSTANDARDIZATION ORGANIZATION FOR G.C.C (GSO) GSO 34/2007
STANDARDIZATION ORGANIZATION FOR G.C.C (GSO) GSO 34/2007 LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES ICS: 43.040.00 LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD
Translated English of Chinese Standard: GB18351-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 18351-2015 Replacing
More informationDRAFT EAST AFRICAN STANDARD
ICS 67.160.10 DRAFT EAST AFRICAN STANDARD Opaque beers Specification EAST AFRICAN COMMUNITY EAC 2013 Second Edition 2013 Table of contents 1 Scope... 1 2 Field of application... 1 3 Definition... 1 4 Requirements
More informationNatural and Synthetic Fragrance Materials Sectional Committee, PCD 18
Draft for Comments Only Doc: PCD 18( 2356) C February 2006 BUREAU OF INDIAN STANDARDS Draft Indian Standard CITRONELLOL SPECIFICATION (Fourth Revision) ICS 71.100.60 Not to be reproduced without the permission
More informationISO INTERNATIONAL STANDARD. Aerospace Airframe needle roller, cylindrical roller and track roller bearings Technical specification
INTERNATIONAL STANDARD ISO 13411 First edition 1997-12-15 Aerospace Airframe needle roller, cylindrical roller and track roller bearings Technical specification Aéronautique et espace Roulements à aiguilles,
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB17930-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 75.160.20 E 31 GB 17930-2013 Replacing
More informationDraft for comments only Not to be cited as East African Standard
EAST AFRICAN STANDARD Speedometer equipment for motor vehicles Specification EAST AFRICAN COMMUNITY CD/K/022:2008 ICS 43.040.30 EAC 2010 First Edition 2010 CD/K/022:2008 Foreword Development of the East
More informationDRAFT UGANDA STANDARD
DUS EAS 854 First Edition 2015-mm-dd Thinner for nitrocellulose resin-based paints and lacquers Specification Reference number DUS EAS 854: 2015 UNBS 2015 DUS EAS 854:2015 Compliance with this standard
More informationASTM D Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels
ASTM D 6751 02 Standard Specification for Biodiesel Fuel (B 100) Blend Stock for Distillate Fuels Summary This module describes the key elements in ASTM Specifications and Standard Test Methods ASTM Specification
More informationKENYA STANDARD KS EAS
KENYA STANDARD KS EAS 146:2014 ICS67.160.10 APPROVED 2015-06-29 Rum Specification KEBS 2015 Second Edition 2015 KS EAS 146: 2014 TECHNICAL COMMITTEE REPRESENTATION The following organizations were represented
More informationEDICT ± OF GOVERNMENT
EDICT ± OF GOVERNMENT Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw,world tradeandworldpeace,thislegaldocumentisherebymade availableonanoncommercialbasis,asitistherightofal
More informationISO INTERNATIONAL STANDARD. Compressed air Part 5: Test methods for oil vapour and organic solvent content
INTERNATIONAL STANDARD ISO 8573-5 First edition 2001-12-15 Compressed air Part 5: Test methods for oil vapour and organic solvent content Air comprimé Partie 5: Méthodes d'essai pour la teneur en vapeurs
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION ISO/TS 17306 First edition 2015-02-01 Petroleum products Biodiesel Determination of free and total glycerin and mono-, di- and tracylglycerols by gas chromatography Produits pétroliers
More informationOPERATIONS SEAFARER CERTIFICATION GUIDANCE NOTE SA MARITIME QUALIFICATIONS CODE. Deck: Ship s Power Plants
Page 1 of 8 Compiled by Approved by Chief Examiner Syllabus Committee: 26 February 2013 OPERATIONS SEAFARER CERTIFICATION GUIDANCE NOTE SA MARITIME QUALIFICATIONS CODE Deck: Page 2 of 8 KNOWLEDGE, UNDERSTANDING
More informationGCC STANDARDIZATION ORGANIZATION (GSO)
هيئة التقييس لدول مجلس التعاون لدول الخليج العربية GCC STANDARDIZATION ORGANIZATION (GSO) مشروع مواصفة نهائي Final Draft of Standard FDS TC 02/SC 01 إعداد اللجنة الفنية الفرعية الخليجية رقم Prepared by
More informationEAST AFRICAN STANDARD. Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY. HS (regular); HS
EAST AFRICAN STANDARD Automotive gasoline (premium motor spirit) Specification EAST AFRICAN COMMUNITY HS 2710.11.10(regular); HS 2710.11.10(premium) ICS 75.160.20 EAS 2011 Second Edition 2011 ii Table
More informationFor BIS Use Only Doc: CED 50(7436) BUREAU OF INDIAN STANDARDS
For BIS Use Only Doc: CED 50(7436) BUREAU OF INDIAN STANDARDS DRAFT FOR COMMENTS ONLY (Not to be reproduced without the permission of BIS or used as an Indian Standard) Draft Indian Standard SPECIFICATION
More informationÚÄÄÄÄÄÄÄÄÄÄ ÚÄÄÄÄÄÄÄÄÄÄ ³ METRIC ³ ÀÄÄÄÄÄÄÄÄÄÄÙ TT-T-306E May 28, 1993 SUPERSEDING TT-T-306D December 31, 1992 FEDERAL SPECIFICATION
ÚÄÄÄÄÄÄÄÄÄÄ ÚÄÄÄÄÄÄÄÄÄÄ ³ METRIC ³ ÀÄÄÄÄÄÄÄÄÄÄÙ May 28, 1993 SUPERSEDING TT-T-306D December 31, 1992 FEDERAL SPECIFICATION THINNER, SYNTHETIC RESIN ENAMELS This specification has been approved by the Commissioner,
More informationLeather Chemical tests Determination of the content of pentachlorophenol in leather
DRAFT FOR DEVELOPMENT DD CEN/TS 14494:2003 Leather Chemical tests Determination of the content of pentachlorophenol in leather ICS 59.140.30 DD CEN/TS 14494:2003 National foreword This Draft for Development
More informationProduction of Biodiesel from Used Groundnut Oil from Bosso Market, Minna, Niger State, Nigeria
Production of Biodiesel from Used Groundnut Oil from Bosso Market, Minna, Niger State, Nigeria Alabadan B.A. Department of Agricultural and Bioresources Engineering, Federal University, Oye Ekiti. Ajayi
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17043:2010. ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA Amy Meacock
SCOPE OF ACCREDITATION TO ISO/IEC 17043:2010 ASTM INTERNATIONAL 100 Barr Harbor Drive West Conshohocken, PA 19428 Amy Meacock 610 832 9688 PROFICIENCY TESTING PROVIDER Valid To: May 31, 2021 Certificate
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15199-2:2006 Petroleum products - Determination of boiling range distribution by gas chromatography method - Part 2: Heavy distillates and residual fuel Petroleum products - Determination
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T25978-2018 www.chinesestandard.net Buy True-PDF Auto-delivery. Sales@ChineseStandard.net ICS 43.020 NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB T
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62391-2 First edition 2006-04 Fixed electric double-layer capacitors for use in electronic equipment Part 2: Sectional specification Electric double-layer capacitors for power
More informationIsobutanol. Isobutanol, Isobutyl alcohol, 2-methyl-1-propanol. Molecular formula. CAS-No EC-No
Technical Information Petrochemicals M 2105 e May 2016 Page 1 of 5 Supersedes edition of July 2014 Isobutanol Colorless, mobile solvent of medium volatility. Feedstock for syntheses. Chemical nature Isobutanol,
More informationISO 3679 INTERNATIONAL STANDARD. Determination of flash point Rapid equilibrium closed cup method
INTERNATIONAL STANDARD ISO 3679 Third edition 2004-04-01 Determination of flash point Rapid equilibrium closed cup method Détermination du point d'éclair Méthode rapide à l'équilibre en vase clos Reference
More informationDRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS 249-5 Second Edition 2018-mm-dd Engine Oils Performance Classification Part 5: Specification for Internal Combustion engine oils used in twostroke cycle motorcycle gasoline engines
More informationDraft Indian Standard SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION
Comments Only BUREAU OF INDIAN STANDARDS Draft Indian Standard Doc:PCD 3(2537)C September 2012 SYN GAS/ AMMONIA TURBO COMPRESSOR LUBRICATING OILS SPECIFICATION Not to be reproduced without the permission
More informationPRE-RELEASE VERSION (FDIS)
IEC 61238-1-1 Edition 1.0 2018-02 PRE-RELEASE VERSION (FDIS) Compression and mechanical connectors for power cables Part 1-1: Test methods and requirements for compression and mechanical connectors for
More informationISO 659 INTERNATIONAL STANDARD. Oilseeds Determination of oil content (Reference method)
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 659 Fourth edition 2009-07-01 Oilseeds Determination of oil content (Reference method) Graines oléagineuses Détermination de la teneur en huile
More informationSampling kits and test suites
Shell LubeAnalyst Sampling kits and test suites Oil sampling kits and test suites Basic K1 - Transport Monitors wear & contamination Basic Plus K1+ - Transport Determines optimum drain intervals Differentials,
More informationISO 6264 INTERNATIONAL STANDARD. Hydraulic fluid power Pressure-relief valves Mounting surfaces
INTERNATIONAL STANDARD ISO 6264 Second edition 1998-03-01 Hydraulic fluid power Pressure-relief valves Mounting surfaces Transmissions hydrauliques Limiteurs de pression Plan de pose A Reference number
More informationFEDIOL code of practice on the safety of vegetable oils and fats products for feed and food with regard to dioxin and dioxin-like PCBs
FEDIOL code of practice on the safety of vegetable oils and fats products for feed and food with regard to dioxin and dioxinlike PCBs FEDIOL published its code on the safety of feed with regard to dioxin
More informationISO INTERNATIONAL STANDARD
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 11158 Second edition 2009-09-15 Corrected version 2009-12-01 Lubricants, industrial oils and related products (class L) Family H (hydraulic systems)
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33225-9 SOUTH AFRICAN NATIONAL STANDARD Automotive fuels Requirements and test methods for diesel WARNING This document references other documents normatively. Published by SABS Standards
More informationEI HMC Report Spring API Committee on Petroleum Measurement Standards Meeting
EI HMC Report 2017 Spring API Committee on Petroleum Measurement Standards Meeting STAC EI Technical Committee Structure STAC Health Technical Committee Environmental Management Group Safety Management
More informationSaudi Standards, Metrology and Quality Org(SASO)
الهيي ة السعودية للمواصفات و المقاييس و الجودة Saudi Standards, Metrology and Quality Org(SASO) SASO 2857:2015 VEHICLE TIRES ROLLING RESISTANCE AND WET GRIP REQUIREMENTS ICS : 83.160.01 مقدمة قامت الهيي
More informationFEDERAL SPECIFICATION METHANOL (METHYL ALCOHOL) 1.1 Scope. This specification covers three grades and four unit quantities of methanol.
NOT MEASUREMENT SENSITIVE 19 January 2016 SUPERSEDING O-M-232L 4 January 2006 FEDERAL SPECIFICATION METHANOL (METHYL ALCOHOL) The General Services Administration has authorized the use of this federal
More informationCeiba Crude (31.44 API, Sul WT%)
Ceiba Crude (31.44 API, 0.398 Sul WT%) Crude Name: Ceiba Crude API Gravity API 31.44 Component Wt % Vol % Crude ID: CEIBA2015 Density @15 deg C KG/L 0.8679 C2 Minus 0.004 0.01 Country: Equatorial Guinea
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62281 Edition 2.0 2012-12 colour inside Safety of primary and secondary lithium cells and batteries during transport INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE T ICS
More informationISO :2015/DAM 1
DRAFT AMENDMENT ISO 19973-2:2015/DAM 1 ISO/TC 131 Voting begins on: 2018-01-15 Secretariat: ANSI Voting terminates on: 2018-04-09 Pneumatic fluid power Assessment of component reliability by testing Part
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that EPA National Vehicle and Fuel Emissions Laboratory
More informationGCC STANDARDIZATION ORGANIZATION (GSO)
هيئة التقييس لدول مجلس التعاون لدول الخليج العربية GCC STANDARDIZATION ORGANIZATION (GSO) مشروع مواصفة نهائي Final Draft of Standard FDS TC 02/SC 01 إعداد اللجنة الفنية الفرعية الخليجية رقم Prepared by
More informationISO INTERNATIONAL STANDARD. Pneumatic fluid power Cylinders Final examination and acceptance criteria
INTERNATIONAL STANDARD ISO 10099 Second edition 2001-05-01 Pneumatic fluid power Cylinders Final examination and acceptance criteria Transmissions pneumatiques Vérins Critères de réception et de vérification
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 20847 First edition 2004-03-15 Petroleum products Determination of sulfur content of automotive fuels Energy-dispersive X-ray fluorescence spectrometry Produits pétroliers Détermination
More informationISO 660 INTERNATIONAL STANDARD. Animal and vegetable fats and oils Determination of acid value and acidity
INTERNATIONAL STANDARD ISO 660 Third edition 2009-06-15 Animal and vegetable fats and oils Determination of acid value and acidity Corps gras d'origines animale et végétale Détermination de l'indice d'acide
More informationSOUTH AFRICAN NATIONAL STANDARD
ICS 43020 ISBN 0-626-17429-5 Edition 11 Any reference to SABS 0319 is deemed to be a reference to this standard (Government Notice No 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD The registration
More informationPTV TECHNICAL PRESCRIPTIONS. ELASTOMERIC SEALS: Part 1: Vulcanized Rubber FOR. Impartial institute for the monitoring of construction products
PTV 8681-1 TECHNICAL PRESCRIPTIONS TECHNICAL PRESCRIPTIONS FOR ELASTOMERIC SEALS: Part 1: Vulcanized Rubber COPRO vzw Version 1.0 dated 2017-10-17 Impartial institute for the monitoring of construction
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 15829 Second edition 2013-06-15 Road vehicles Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation Véhicules routiers
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10542-1 Second edition 2012-10-01 Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 1: Requirements and test
More informationISO INTERNATIONAL STANDARD. Mechanical vibration Rotor balancing Part 32: Shaft and fitment key convention
INTERNATIONAL STANDARD ISO 21940-32 First edition 2012-03-15 Mechanical vibration Rotor balancing Part 32: Shaft and fitment key convention Vibrations mécaniques Équilibrage des rotors Partie 32: Convention
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 10542-1 Second edition 2012-10-01 Technical systems and aids for disabled or handicapped persons Wheelchair tiedown and occupant-restraint systems Part 1: Requirements and test
More informationProvläsningsexemplar / Preview SVENSK STANDARD SS-EN 14667:2006 Fastställd 2006-12-06 Utgåva 1 Surface active agents Determination of low boiling solvents in liquid formulations Gas chromatographic method
More informationISO/TC 131/SC
DRAFT INTERNATIONAL STANDARD ISO/DIS 6149-1 ISO/TC 131/SC 4 Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated
More informationSafety of. Car Tires
Safety of Car Tires Tires are an essential part of cars and other vehicles and they play a key role in ensuring the safety of the passengers. Therefore, tires damages and burst problems is one of the
More information532: 2006 Bicycle tube valves and valve tubing Specification (third revision) 2414: 2005 Cycle and rickshaw pneumatic tyres (fourth revision)
For BIS use only Draft Indian Standard CYCLE RUBBER TUBES (MOULDED/JOINTED) SPECIFICATION (fourth revision of IS 2415) Not to be reproduced without the permission Last date for receipt of comments is of
More informationMethod Implementation Document (MID)
Method Implementation Document (MID) BS EN 14792:2005 Stationary source emissions Determination of mass concentration of nitrogen oxides (NOx) Reference method: Chemiluminescence Environment Agency Version
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IS0 7483 First edition 1991-10-01 --- ---- -.----.----_-- -_ ----- - - Dimensions of gaskets for use with flanges to IS0 7005 Dimensions des joints B utiliser avec les brides de
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60296 Third edition 2003-11 Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear IEC 2003 Copyright - all rights reserved No
More informationISO INTERNATIONAL STANDARD. Lubricants, industrial oils and related products (Class L) Family X (Greases) Specification
INTERNATIONAL STANDARD ISO 12924 First edition 2010-05-01 Lubricants, industrial oils and related products (Class L) Family X (Greases) Specification Lubrifiants, huiles industrielles et produits connexes
More informationDoc:TED 11(794)W 1 September 2012 Draft Standard Automotive Vehicles - Windscreen Wiping System for 3 Wheeler Vehicles - Specification
For Comments only Doc:TED 11(794)W 1 September 2012 Draft Standard Automotive Vehicles - Windscreen Wiping System for 3 Wheeler Vehicles - Specification Not to be reproduced without permission Last date
More informationDRAFT Jamaican Standard Specification for Bituminous materials
DRAFT Jamaican Standard Specification for Bituminous materials BUREAU OF STANDARDS Notice This is a draft standard and shall be used or referred to as a Jamaican Standard. It is subject to change without
More informationmeasuring vessel air inlet conductivity cell reaction vessel sample absorption solution (water) heating block (e.g. 120 C)
Rancimat Practice Principle of Rancimat method air inlet measuring vessel reaction vessel conductivity cell sample heating block (e.g. 120 C) absorption solution (water) Preparing a determination reaction
More informationAPI Service Category SN. Comparative Review API SN and ILSAC GF-5 Revisions Based on January 8 Ballot Comments March 19, 2010
API Service Category SN Comparative Review API SN and ILSAC GF-5 Revisions Based on January 8 Ballot Comments March 19, 2010 1 Proposed Changes to January 8 Balloted Version SN Sequence IIIGA/ROBO for
More informationTejp - Mätning av beständighet mot värme och fuktighet. Self adhesive tapes - Measurement of resistance to elevated temperature and humidity
Self adhesive tapes - Measurement of resistance to elevated temperature and humidity Tejp - Mätning av beständighet mot värme och fuktighet The European standard EN 12024:1996 has the status of a Swedish
More informationWELMEC External Auxiliary Power Supply of Electrical Energy Meters
WELMEC 11.8 2018 External Auxiliary of Electrical Energy Meters WELMEC is a cooperation between the legal metrology authorities of the Member States of the European Union and EFTA. This document is one
More informationGB Translated English of Chinese Standard: GB NATIONAL STANDARD OF THE
Translated English of Chinese Standard: GB29743-2013 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 03.220.20 R 16 GB 29743-2013 Motor Vehicle
More information2020 GLOBAL SULPHUR LIMIT HISTORY, CURRENT STATUS, AND THE INTERNATIONAL MARITIME ORGANIZATION S (IMO S) WORK PLAN FOR EFFECTIVE IMPLEMENTATION
2020 GLOBAL SULPHUR LIMIT HISTORY, CURRENT STATUS, AND THE INTERNATIONAL MARITIME ORGANIZATION S (IMO S) WORK PLAN FOR EFFECTIVE IMPLEMENTATION Marshall Islands Registry and Korean Industry Stakeholders
More informationDraft Indian Standard Specification for Rubber Gaskets (First Revision of IS : 1984) ICS , ,
For BIS Use Only Draft Indian Standard Specification for Rubber Gaskets (First Revision of IS 11149 : 1984) ICS 23.040.80, 83.060, 83.140.50 Not to be reproduced without the permission of Last date for
More informationISO INTERNATIONAL STANDARD. Wheelchair seating Part 4: Seating systems for use in motor vehicles
INTERNATIONAL STANDARD ISO 16840-4 First edition 2009-03-15 Wheelchair seating Part 4: Seating systems for use in motor vehicles Sièges de fauteuils roulants Partie 4: Systèmes d'assise dans les véhicules
More informationISO INTERNATIONAL STANDARD. Ships and marine technology Identification colours for the content of piping systems
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 14726 First edition 2008-05-01 Ships and marine technology Identification colours for the content of piping systems Navires et technologie maritime
More informationAustralian/New Zealand Standard
AS/NZS 3696.19:2009 AS/NZS 3696.19:2009 Australian/New Zealand Standard Wheelchairs Part 19: Wheeled mobility devices for use as seats in motor vehicles (ISO 7176-19:2008, MOD) AS/NZS 3696.19:2009 This
More informationISO INTERNATIONAL STANDARD. Metallic tube connections for fluid power and general use Part 2: 37 flared connectors
INTERNATIONAL STANDARD ISO 8434-2 Second edition 2007-09-01 Metallic tube connections for fluid power and general use Part 2: 37 flared connectors Raccordements de tubes métalliques pour transmissions
More informationRevision of the Monograph on Estradiol Valerate. Draft Proposal for The International Pharmacopoeia (July 2018) DRAFT FOR COMMENTS
July 2018 Draft document for comments 1 2 3 4 5 Revision of the Monograph on Estradiol Valerate (ESTRADIOLI VALERAS) Draft Proposal for The International Pharmacopoeia (July 2018) DRAFT FOR COMMENTS Should
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 18106 First edition 2016-08-15 Passenger car, commercial vehicle, truck and bus tyres Methods for measuring snow grip performance Loaded new tyres Pneumatiques pour voitures
More informationISO 5700 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 5700 Fourth edition 2006-11-15 Tractors for agriculture and forestry Roll-over protective structures (ROPS) Static test method and acceptance conditions Tracteurs agricoles et
More informationCity of Lake Oswego Transportation System Plan Update PLAN AND POLICY REVIEW, PART 1
City of Lake Oswego Transportation System Plan Update PLAN AND POLICY REVIEW, PART 1 Date: March 7, 2012 Project #: 11187 To: Cc: From: Project: Subject: Project Management Team Transportation System Plan
More informationRegals De Bretagne (part of CBE group)
Particulars About Your Organisation 1.1 Name of your organization Regals De Bretagne (part of CBE group) 1.2 What is/are the primary activity(ies) or product(s) of your organization? Oil Palm Growers Palm
More informationBallot API 1509, Annex G Phosphorus Limits for Universal Oil. Instructions
Instructions Ballot for API 1509, Annex G - Stripped Viscosity Footnote Universal Oils have an API C Category Classification (for Diesel Engine Oils) with an API S Category Classification (for Gasoline
More informationRFS2: Where Are We Now And Where Are We Heading? Paul N. Argyropoulos
Agricultural Outlook Forum Presented: February 24-25, 2011 U.S. Department of Agriculture RFS2: Where Are We Now And Where Are We Heading? Paul N. Argyropoulos Office of Transportation and Air Quality
More informationDraft for comments only Not to be cited as East African Standard
EAST AFRICAN STANDARD CD/K/021:2008 ICS 43.040.50 Motor vehicle safety Steering mechanism of motor vehicles (Category M 1 only) Behaviour on impact EAST AFRICAN COMMUNITY EAC 2010 First Edition 2010 CD/K/021:2008
More informationISO INTERNATIONAL STANDARD. Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements
INTERNATIONAL STANDARD ISO 22241-1 First edition 2006-10-15 Diesel engines NOx reduction agent AUS 32 Part 1: Quality requirements Moteurs diesel Agent AUS 32 de réduction des NOx Partie 1: Exigences de
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10100 Second edition 2001-08-01 Hydraulic fluid power Cylinders Acceptance tests Transmissions hydrauliques Vérins Essais de réception Reference number ISO 10100:2001(E) ISO
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD
Translated English of Chinese Standard: GB/T31255-2014 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 13.110 J 09 GB/T 31255-2014 Safety of
More informationFOR STUDY هيئة التقييس لدول مجلس التعاون لدول الخليج العربية GCC STANDARDIZATION ORGANIZATION (GSO)
هيئة التقييس لدول مجلس التعاون لدول الخليج العربية GCC STANDARDIZATION ORGANIZATION (GSO) Final Draft Standard GSO 02/01/FDS/GSO 645:2009 إطارات السيارات متعددة األغراض والشاحنات والحافالت والمقطورات الجزء
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 15519:2007 Paper and board intended to come into contact with foodstuffs - Preparation of an organic solvent extract Paper and board intended to come into contact with foodstuffs
More informationIS INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IS0 054 First edition 1998-09-01 Internal combustion compression-ignition engines - Measurement apparatus for smoke from engines operating under steady-state conditions - Filter-type
More informationHeating Methods. Reflux and Distillation
Heating Methods Reflux and Distillation Heating Methods Reflux Distillation Reflux You will use this next lab for the synthesis of aspirin not in this lab experiment Heating the reaction contents without
More informationHydraulic fluid power Dimensions and requirements of quick-action couplings
INTERNATIONAL STANDARD ISO 7241 First edition 2014-07-15 Hydraulic fluid power Dimensions and requirements of quick-action couplings Transmissions hydrauliques Dimensions et exigences des raccords rapides
More informationn-butanol n-butanol, n-butyl alcohol,1-butanol Molecular formula CAS-No EC-No
Technical Information Petrochemicals M 2084 e August 2016 Page 1 of 5 Supersedes edition of July 2014 n-butanol Colorless, mobile solvent of medium volatility. Feedstock for syntheses. Chemical nature
More informationMineral Turpentine Adulterant in Lubricating Oil
DOI:10.7598/cst2015.1095 Chemical Science Transactions ISSN:2278-3458 2015, 4(4), 975-980 RESEARCH ARTICLE Mineral Turpentine Adulterant in Lubricating Oil RAGHUNATH TOCHE 1, SHOBHA BORADE 2, MADHUKAR
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 8855 Second edition 2011-12-15 Road vehicles Vehicle dynamics and road-holding ability Vocabulary Véhicules routiers Dynamique des véhicules et tenue de route Vocabulaire Reference
More informationFederationofMalysia EDICTOFGOVERNMENT±
FederationofMalysia EDICTOFGOVERNMENT± Inordertopromotepubliceducationandpublicsafety,equal justiceforal,abeterinformedcitizenry,theruleoflaw, worldtradeandworldpeace,thislegaldocumentishereby madeavailableonanoncommercialbasis,asitistherightof
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 21069-2 First edition 2008-05-01 Road vehicles Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester Part 2: Air
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB/T Translated English of Chinese Standard: GB/T
Translated English of Chinese Standard: GB/T14951-2007 www.chinesestandard.net Sales@ChineseStandard.net ICS 43.020 R 06 National Standard of the People s Republic of China GB Replacing GB/T 14951-1994,
More informationISO INTERNATIONAL STANDARD. Wheelchairs Part 7: Measurement of seating and wheel dimensions
INTERNATIONAL STANDARD ISO 7176-7 First edition 1998-05-15 Wheelchairs Part 7: Measurement of seating and wheel dimensions Fauteuils roulants Partie 7: Mesurage des dimensions d'assise et des roues A Reference
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14066:2003 Natural stone test methods - Determination of resistance to ageing by thermal shock Natural stone test methods - Determination of resistance to ageing by thermal shock
More information