Industrial engine. ratings guide. Choose your perfect. powersolution

Transcription

1 Industrial engine ratings guide Choose your perfect powersolution

2 Contents Diesel Engine Rating Definitions 8 Rating Conditions 8 Sulphur Diesel Definition 9 10 IOPU Engine Highly Regulated F F F-E17T F-E Aftertreatment F-E22T F-E22TA F-E Aftertreatment E-E34TA E-E34TA Power Unit F-E34T F-E34T Power Unit Aftertreatment F-E34TA F-E34TA Power Unit Aftertreatment F-E28T F-E28TA J-E28T J-E28TA J-E36TA E-E44TA E-E44TA Power Unit E-E44TTA E-E44TTA Power Unit E Aftertreatment F-E44TA F-E44TA Power Unit F-E44TTA F-E44TTA Power Unit F Aftertreatment F Aftertreatment E-E66TA E-E66TA Aftertreatment E-E70TTA E-E70TTA Aftertreatment F-E70TA F-E70TTA F-E70TTA Power Unit F-E70TA/TTA Aftertreatment J-E93TA J-E Aftertreatment J-E13TA J-E13TA Aftertreatment J-E15TA J-E15TA Aftertreatment J-E18TA/TTA J-E18TA/TTA Aftertreatment Lesser Regulated D D D D-11 Power Unit D D-15 Power Unit D-15T D D D-22 Power Unit D-22T D-22T Power Unit D-22TA D-22TA Power Unit D-E28T D-E28TA D-E36TA Perkins Guide Guide Perkins 3

3 1103C-33T D D-33TA A A-44T C C-44 Power Unit C-44T C-44T Power Unit C-44TA C-44TA Power Unit D D-44T D-44T Power Unit D-44TA D-44TA Power Unit D-E44T D-E44TA D-E44TA Power Unit C-70TA D-70TA D-E70TA D-E70TA Power Unit D-E13TA D-E15TA D-E18TA/TTA Accessories 112 Engine Control Panels Perkins Guide Guide Perkins 5

4 harvester paver Product Range 1200 Series kw ( hp) 4 and 6 cylinder 2506 Series kw ( hp) 6 cylinder 400 Series kw (11-66 hp) 2, 3 and 4 cylinder powering kw ( hp) 4 cylinder 1100 Series kw ( hp) 3, 4 and 6 cylinder Access Platforms Snow Groomers Grape Harvesters tractor Tractors Crop Sprayers Pavers skid steer loader Skid Steer Loaders Forklifts Wheeled Loaders Mini Excavators Screeners Cotton Pickers Harvesters Trenchers Rollers Irrigation Pumps telehandler Telehandlers motorgrader Motor Graders Sugarcane Harvesters Mini Wheeled Loaders Dozers Combine Harvesters Lighting Towers Rock Drills Air Compressors Material Handlers Welders Mowers Auxilliary Power Crushers Back Hoe Handlers Forest Machines Excavators Airport Baggage Trucks Tree Shakers 6 Perkins Guide Guide Perkins 7

5 Diesel Engine Rating Definitions IND-A (Continuous) Continuous heavy-duty service where the engine is operated at maximum power and speed up to 100% of the time without interruption or load cycling. IND-B For service where power and/or speed are cyclic (time at full load not to exceed 80%). IND-C (Intermittent) Is the horsepower and speed capability of the engine where maximum power and/or speed are cyclic (time at full load not to exceed 50%). IND-D For service where maximum power is required for periodic overloads (time at full load not to exceed 10% of the duty cycle). IND-E For service where maximum power is required for a short time for initial starting or sudden overload. For emergency service where standard power is unavailable (time at full load not to exceed 5% of the duty cycle). Additional ratings are available for specific customer requirements. Consult your Perkins distributor. Engine rating obtained and presented in accordance with ISO3046/1. Rating Conditions Diesel Engines - up to 7.1 litre All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kpa (29.5 in. Hg), with a vapour pressure of 1 kpa (0.295 in. Hg) and 25 C (77 F). Performance is measured using fuel to specification EPA 40 CFR Part 1065 and EU Directive 97/68/EC with a density of C (59 F) and fuel inlet temperature 40 C (104 F). Diesel Engines - greater than 7.1 litre All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kpa (29.31 in Hg) dry barometer and 25 C (77 F) temperature. Performance measured using a standard fuel with fuel gravity of 35 API having a lower heating value of 42,780 kj/kg (18,390 btu/lb) when used at 29 C (84.2 F) with a density of g/l. Sulphur Diesel Definition Industrial technology requires Ultra Low Sulphur Diesel Fuel (ULSD, 15 ppm sulphur), in addition to ultra low sulphur diesel oils, for use in Tier 4 Interim / Tier 4 Final / Stage IIIB / Stage IV / Stage V engines. These cleaner fuels and oils will help reduce ash and maintain service intervals. In addition, B20 biodiesel capability adds even greater sustainability where desired or required. Abbreviations ATAAC... Air to air aftercooled hp... horsepower CFR... Code of Federal Regulations db(a)... decibel(a filter) EC...European Commission EPA...Environmental Protection Agency EU... European Union in... inches IOPU... Industrial Open Power Unit ISO... International Organisation for Standardisation lbf.ft... pound-force foot kg... kilograms kw.... kilowatts mm... millimetres NA... naturally aspirated Nm...newton meter NOx... oxides of nitrogen pm....particulate matter SFC...specific fuel consumption T... turbocharged TA...turbocharged aftercooled TTA... Series turbocharged aftercooled Mech... engine with mechanical fuel injection equipment Elect engine with full electronically controlled fuel injection equipment 8 Perkins Guide Guide Perkins 9

6 10 Perkins Guide Guide Perkins 11

7 IOPU Engine Industrial engine range Perkins offers a complete suite of industrial engine platforms that span the entire kw ( kw) power range: 400 Series 2, 3 and 4 cylinder 850 Series 4 cylinder cylinder 1100 Series 3, 4 and 6 cylinder 1200 Series 4 and 6 cylinder 1706 Series 6 cylinder 2206 Series 6 cylinder 2506 Series 6 cylinder 2806 Series 6 cylinder Industrial Open Power Units (IOPUs) Perkins industrial power units offer the benefits of an industrial engine, with the convenience of a cost-effective cooling and filtration solution. This minimises machine development time and costs, and enables applications to be powered with ease The units come complete with fuel system, air cleaner and radiator Options are provided to customers through a choice of fan, alternator, front PTO and air compressor Control panels are also available for 850, 1100, 1200, 1706, 2206, 2506 and 2806 Series IOPUs Industry-leading flexibility Modular engine architecture enables development of single machine platforms to meet emissions standards in any territory World-class integration programme that reduces customer s development time and costs Huge range of options give flexibility in configuration, range and fit to perfectly match customer applications Engines that deliver more power in a smaller package. Frees up space for aftertreatment systems and enables customers to develop smaller, more agile machines Dependable power Technology fitted to deliver the application s optimum performance and compliance with required emissions levels High power density combined with excellent torque delivers the power when and where it s needed Fuel systems have excellent tolerance to different fuel qualities around the world Competitive 500 hour service intervals and two-year warranties 12 Perkins Guide Guide Perkins 13

8 Lifetime of low cost Engine design and development based on common platform theme reduces changeover costs Simple installation Exceptional fuel economy Service-free components and minimal maintenance reduce downtime Local support, global coverage Global distributor network provides local support to our customers Expert product knowledge, genuine parts, advanced diagnostic technology to keep your engine in peak condition Perkins Platinum Protection protect and plan the cost of ownership Remanufactured parts reduce cost and downtime Regional manufacturing facilities in United Kingdom, North America, Brazil, China and India Parts distribution centres in United Kingdom and Singapore 14 Perkins Guide Guide Perkins 15

9 Highly Regulated 403F-07 Highly Regulated 403F-11 Number of cylinders...3 in-line Bore and stroke x 72 mm (2.6 x 2.8 in) Displacement litres (46.5 cubic in) Aspiration....Naturally aspirated Combustion system... Indirect injection Compression ratio :1 Total lubricating capacity litres (0.8 US gal) Total coolant capacity litres (0.3 US gal) Length mm (18.9 in) Width mm (14.6 in) Height mm (20.8 in) Dry weight kg (156.5 lb) Rating Type kw Power hp C Number of cylinders...3 in-line Bore and stroke x 81 mm (3.0 x 3.2 in) Displacement litres (69 cubic in) Aspiration....Naturally aspirated Combustion system... Indirect injection Compression ratio... 23:1 Total lubricating capacity litres (1.1 US gal) Total coolant capacity litres (0.5 US gal) Length mm (19.3 in) Width mm (15.7 in) Height mm (22.6 in) Dry weight kg (191 lb) C C Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power 95% component commonality to reduce inventory costs High residual value Introduction of electronic governor for electronic machine integration Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power 95% component commonality to reduce inventory costs High residual value Introduction of electronic governor for electronic machine integration US EPA Tier 4 Final. Less than 19 kw, EU certification not required. US EPA Tier 4 Final. Less than 19 kw, EU certification not required. 16 Perkins Guide Guide Perkins 17

10 Highly Regulated 403F-E17T Highly Regulated 403F-E Aftertreatment Number of cylinders...3 in-line Bore and stroke...84 mm x 90 mm (3.3 in x 3.5 in) Displacement litres (103.7 cubic in) Aspiration.... Turbocharged Compression ratio... 18:1 Total lubricating capacity litres (0.9 US gal) Total coolant capacity litres (0.7 US gal) Length mm (25.2 in) Width mm (21.4 in) Height mm (27.2 in) Dry weight kg (419 lb) Aftertreatment Length Diameter of Can Weight 408 mm (16.0 in) 155 mm (6.1 in) 5.8 kg (12.8 lb) Aftertreatment DOC - Diesel Oxidation Catalyst Nm (lbf.ft) C (92) Reduced oil consumption Easy maintenance and serviceability Improved oil consumption Service-free aftertreatment system Regeneration-free aftertreatment system eliminates downtime 500 hour service interval Two year warranty as standard The DOC technology provides customers with as compact as possible aftertreatment solution. The aftertreatment is regeneration-free, providing a seamless operation throughout the work cycle On or off engine installation options provide OEM with simple and flexible solutions for many applications Service-free operation U.S. EPA Tier 4 Final and Japan 2014 (Tier 4 Final) emissions standards 18 Perkins Guide Guide Perkins 19

11 Highly Regulated 404F-E22T Highly Regulated 404F-E22TA Bore and stroke x 100 mm (3.3 x 3.9 in) Displacement litres (135 cubic in) Aspiration.... Turbocharged Compression ratio... 18:1 Total lubricating capacity litres (2.8 US gal) Total coolant capacity litres (1.1 US gal) Length including fan mm (28.4 in) Width mm (21.4 in) Height mm (28.3 in) Dry weight kg (507 lb) Nm (lbf.ft) C (122) Bore and stroke x 100 mm (3.3 x 3.9 in) Displacement litres (135 cubic in) Compression ratio... 18:1 Total lubricating capacity litres (2.8 US gal) Total coolant capacity litres (1.1 US gal) Length mm (28.4 in) Width mm (21.4 in) Height mm (28.3 in) Dry weight kg (507 lb) Nm (lbf.ft) C (153) Easy maintenance and serviceability Improved oil consumption 500 hour service interval Two year warranty as standard Easy maintenance and serviceability Improved oil consumption 500 hour service interval Two year warranty as standard Regeneration-free aftertreatment system eliminates downtime Regeneration-free aftertreatment system eliminates downtime U.S.EPA Tier 4 Final and Japan 2014 (Tier 4 Final) emissions standards Meets EU Stage IIIB equivalent / U.S.EPA Tier 4 Final / Japan 2014 (Tier 4 Final) emissions standards 20 Perkins Guide Guide Perkins 21

12 Highly Regulated Highly Regulated 404F-E Aftertreatment Aftertreatment Length Diameter of Can Weight 408 mm (16 in) 155 mm (6.1 in) 5.8 kg (12.8 lb) Aftertreatment DOC - Diesel Oxidation Catalyst The DOC technology provides customers with as compact as possible aftertreatment solution. The aftertreatment is regeneration-free, providing a seamless operation throughout the work cycle On or off engine installation options provide OEM with simple and flexible solutions for many applications Service-free operation 22 Perkins Guide Guide Perkins 23

13 Highly Regulated 854E-E34TA Highly Regulated 854E-E34TA Power Unit Bore and stroke x 110 mm (3.9 x 4.3 in) Displacement litres (207.5 cubic in) Compression ratio... 17:1 Total coolant capacity engine only litres (1.6 US gal) - side turbo Length mm (29.4 in) Width mm (26.0 in) Height mm (32.3 in) - top turbo Length mm (29.4 in) Width mm (26.0 in) Height mm (32.7 in) Dry weight kg (595 lb) Rating Type kw Power hp C C C C C C C D D Class-leading package size Extensive choice of options Installation flexibility Engine mounted aftertreatment available Service-free top end for reduced maintenance Poly-vee belts for 3,000 hour service intervals Meets EU Stage IIIB / U.S. EPA Tier 4 Interim equivalent emissions standards Bore and stroke x 110 mm (3.9 x 4.3 in) Displacement litres (207.5 cubic in) Compression ratio... 17:1 Total coolant capacity litres (4.2 US gal) - engine mounted aftertreatment, axially along head Length mm (49.3 in) Width mm (27.7 in) Height mm (40.7 in) - engine mounted aftertreatment, transverse across flywheel housing Length mm (49.3 in) Width mm (27.7 in) Height mm (37.6 in) Dry weight kg (897 lb) kw Power hp Intermittent C Continuous Engine mounted DPF Can be factory installed without DPF Sound improvement over Tier 3/Stage IIIA engine Increased power Compact package Extensive choice of options Installation flexibility Maintenance-free valve adjustment Poly-vee belts for 3,000 service intervals Meets EU Stage IIIB / U.S. EPA Tier 4 Interim equivalent emissions standards 24 Perkins Guide Guide Perkins 25

14 Highly Regulated 854F-E34T Highly Regulated 854F-E34T Power Unit Bore and stroke x 110 mm (3.9 x 4.3 in) Displacement litres (207.5 cubic in) Aspiration.... Turbocharged Compression ratio... 17:1 Total coolant capacity engine only litres (1.6 US gal) - side turbo Length mm (29.4 in) Width mm (26.0 in) Height mm (32.3 in) - top turbo Length mm (29.4 in) Width mm (26.0 in) Height mm (32.7 in) Dry weight kg (606 lb) Rating Type kw Power hp C C C C C Number of cylinders... 4 vertical in-line Bore and stroke x 110 mm (3.9 x 4.3 in) Displacement litres (207.5 cubic in) Aspiration.... Turbocharged Compression ratio... 17:1 Total coolant capacity litres (4.2 US gal) - engine mounted aftertreatment, axially along head Length mm (49.3 in) Width mm (27.7 in) Height mm (40.7 in) - engine mounted aftertreatment, transverse across flywheel housing Length mm (48.3 in) Width mm (27.7 in) Height mm (37.6 in) Dry weight kg (897 lb) C Class-leading package size Extensive choice of options Installation flexibility Engine mounted aftertreatment available Service-free top end for reduced maintenance Poly-vee belts for 3,000 hour service intervals Engine mounted DPF Can be factory installed without DPF Sound improvement over Tier 3/Stage IIIA engine Increased power Compact package Extensive choice of options Installation flexibility Maintenance-free valve adjustment Poly-vee belts for 3,000 service intervals Meets EU Stage IIIB equivalent / U.S. Tier 4 Final emissions standards Meets EU Stage IIIB equivalent / U.S EPA Tier 4 Final emission standards 26 Perkins Guide Guide Perkins 27

15 Highly Regulated 854 Aftertreatment Highly Regulated 854F-E34TA Wall flow Length Diameter of Can Through flow Weight Wall flow 541 mm (21.3 in) 180 mm (7.1 in) 20 kg (44 lb) Through flow 509 mm (20 in) 149 mm (5.8 in) 14 kg (30.8 lb) Aftertreatment DOC - Diesel Oxidation Catalyst - silicon carbide material and uses a through flow principle; the gases pass straight through the device rather than through the walls DPF - Diesel Particulate Filter - for particulate reduction Perkins is offering customer flexibility by having two options for our customers: A silicon carbide wall flow DPF. This porous ceramic material is highly efficient at removing particulate matter - 90% as a minimum - and often much higher A service-free, through flow diesel particulate filter (not suitable for Switzerland) Incorporating low temperature regeneration with oxyexotherm back-up The Diesel Particulate Filter (DPF) technology chosen performs through the whole work cycle of the engine thus allowing it to work efficiently Using our advanced research and development techniques, we have perfectly matched the aftertreatment to the engine. The engine performance has then been optimised to give the maximum power and the emissions module is invisible to the operator in most duty cycles Multiple off and on engine installation options provide OEM with simple and flexible solutions for many applications Minimum 3,000 hour DPF ash service intervals Bore and stroke x 110 mm (3.9 x 4.3 in) Displacement litres (207.5 cubic in) Compression ratio... 17:1 Total coolant capacity litres (1.6 US gal) - side turbo Length mm (29.1 in) Width mm (24.5 in) Height mm (31.7 in) Dry weight kg (595 lb) C C C C C D D D Class-leading package size Extensive choice of options Installation flexibility Engine mounted aftertreatment available EU Stage IV / U.S. EPA Tier 4 Final emissions standards Service-free top end for reduced maintenance Poly-vee belts for 3,000 hour service intervals 28 Perkins Guide Guide Perkins 29

16 Highly Regulated Highly Regulated 854F-E34TA Power Unit DOC and Mixer 854 Aftertreatment mm (16.5 in) mm (13.5 in) Bore and stroke x 110 mm (3.9 x 4.3 in) Displacement litres (207.5 cubic in) Compression ratio... 17:1 Total coolant capacity engine only...16 litres (4.2 US gals) Length mm (46.0 in) Width mm (27.3 in) Height mm (37.6 in) Dry weight kg (897 lb) SCR 10 kg (22 lb) 296 mm (11.6 in) Length Diameter of Can Weight Rating Type kw Power hp C D D mm (22.3 in) 251 mm (9.8 in) 20 kg (44 lb) Aftertreatment DOC - Diesel Oxidation Catalyst SCR - Selective Catalytic Reduction supplied with a range of inlet and outlet options SCR Auxiliaries - A range of tanks and heated lines are available Excellent fuel consumption Hydraulic tappets allow service-free top end Multi-vee belts for longer service intervals 500 hour oil change intervals The DOC/SCR technology provides customer s with as compact as possible aftertreatment solution Using our advanced research and development techniques we have perfectly matched the aftertreatment to the engine. The DOC/SCR is invisible to the operator whilst the machine is being used Multiple on engine mounting positions for DOC/Mixer. Flexibility of remote mounting of SCR can in various orientations Aftertreatment is designed to be service free for the life of the engine EU Stage IV / U.S. EPA Tier 4 Final emissions standards 30 Perkins Guide Guide Perkins 31

17 Highly Regulated 904F-E28T Highly Regulated 904F-E28TA Bore and stroke x 110 mm (3.5 x 4.3 in) Displacement litres (171 cubic in) Aspiration.... Turbocharged Compression ratio... 17:1 Total lubricating capacity litres (1.9 US gal) Total coolant capacity litres (1 US gal) Length mm (25.0 in) Width mm (22.1 in) Height mm (30.2 in) Dry weight kg (540 lb) C Bore and stroke x 110 mm (3.5 x 4.3 in) Displacement litres (171 cubic in) Compression ratio... 17:1 Total lubricating capacity litres (1.9 US gal) Total coolant capacity litres (1 US gal) Length mm (25.0 in) Width mm (22.1 in) Height mm (30.2 in) Dry weight kg (540 lb) C C High torque... even at low speeds Suitable for high integrated machines High torque... even at low speeds Suitable for high integrated machines 4 valve per cylinder for fuel consumption and performance Extensive options choice for installation flexibility Rear gear train for durability and low noise Compact design 4 valve per cylinder for fuel consumption and performance Extensive options choice for installation flexibility Rear gear train for durability and low noise Compact design EU Stage IV / U.S. EPA Tier 4 Final emissions standards EU Stage IV / U.S. EPA Tier 4 Final emissions standards 32 Perkins Guide Guide Perkins 33

18 Highly Regulated 904J-E28T Highly Regulated 904J-E28TA Bore and stroke x 110 mm (3.5 x 4.3 in) Displacement litres (171 cubic in) Aspiration.... Turbocharged Compression ratio... 17:1 Total lubricating capacity engine only 7.5 litres (1.9 US gal) Total coolant capacity engine only litres (1 US gal) Length mm (25.0 in) Width mm (22.1 in) Height mm (30.2 in) Dry weight kg (540 lb) C Bore and stroke x 110 mm (3.5 x 4.3 in) Displacement litres (171 cubic in) Compression ratio... 17:1 Total lubricating capacity engine only 7.5 litres (1.9 US gal) Total coolant capacity engine only litres (1 US gal) Length mm (25.0 in) Width mm (22.1 in) Height mm (30.2 in) Dry weight kg (540 lb) C High torque... even at low speeds Suitable for high integrated machines High torque... even at low speeds Suitable for high integrated machines 4 valve per cylinder for fuel consumption and performance Extensive options choice for installation flexibility Rear gear train for durability and low noise Compact design 4 valve per cylinder for fuel consumption and performance Extensive options choice for installation flexibility Rear gear train for durability and low noise Compact design EU Stage V-capable* *as proposed Stage V emissions standards EU Stage V-capable* *as proposed Stage V emissions standards 34 Perkins Guide Guide Perkins 35

19 Highly Regulated Highly Regulated 904J-E36TA Bore and stroke x 120 mm (3.9 x 4.7 in) Displacement litres (220 cubic in) Compression ratio... 17:1 Total lubricating capacity engine only. 9 litres (2.3 US gal) Total coolant capacity engine only litres (1 US gal) Length mm (26.3 in) Width mm (22.4 in) Height mm (30.6 in) Dry weight kg (606.3 lb) B C C D High torque... even at low speeds 4 valve per cylinder for fuel consumption and performance Extensive options choice for installation flexibility Suitable for high integrated machines Rear gear train for durability and low noise Compact design EPA Tier 4 Final. Stage V-capable* *as proposed Stage V emissions standards 36 Perkins Guide Guide Perkins 37

20 Highly Regulated 1204E-E44TA Highly Regulated 1204E-E44TA Power Unit Bore and stroke x 127 mm (4.13 x 5.0 in) Displacement litres (268.5 cubic in) Compression ratio :1 Total lubricating capacity litres ( US gal) Total coolant capacity litres (2.85 US gal) Length mm (33.3 in) Width mm (30.4 in) Height mm (33.4 in) Dry weight kg (882 lb) C B B C C B B B C C C C Increased power and torque over Tier 3/Stage IIIA engine Compact package Extensive choice of options Installation flexibility Non modular aftertreatment Maintenance-free valve adjustment Poly-vee belts for longer service intervals Number of cylinders... 4 vertical in-line Bore and stroke x 127 mm (4.13 x 5 in) Displacement litres (268.5 cubic in) Cycle... 4 stroke Compression ratio :1 Cooling system... Liquid Total lubricating capacity litres ( US gal) Total coolant capacity litres (2.85 US gal) (including radiator and aftertreatment) Length mm (56.4 in) Width mm (32.3 in) Height mm (44.3 in) <82 kw Height mm (45.3 in) >82 kw Dry weight kg (1433 lb) Rating Power Type kw hp C C B C C Engine mounted DPF Can be factory installed without DPF Sound improvement over Tier 3/Stage IIIA engine Increased power Compact package Extensive choice of options Installation flexibility Maintenance-free valve adjustment Poly-vee belts for longer service intervals Meets EU Stage IIIB / U.S. EPA Tier 4 Interim / Japan 2011 (Tier 4 Interim) equivalent emissions standards 38 Perkins Guide Guide Perkins 39

21 Highly Regulated 1204E-E44TTA Highly Regulated 1204E-E44TTA Power Unit Bore and stroke x 127 mm (4.13 x 5.0 in) Displacement litres (268.5 cubic in) Aspiration... Series turbocharged aftercooled Compression ratio :1 Rotation... Anti-clockwise viewed from flywheel Total lubricating capacity litres ( US gal) Total coolant capacity litres (2.85 US gal) Length mm (33.3 in) Width mm (29.1 in) Height mm (34.1 in) Dry weight kg (926 lb) B B C C Number of cylinders... 4 vertical in-line Bore and stroke x 127 mm (4.13 x 5 in) Displacement litres (268.5 cubic in) Aspiration.... Series turbocharged aftercooled Cycle... 4 stroke Compression ratio :1 Cooling system... Liquid Total lubricating capacity litres ( US gal) Total coolant capacity litres (2.85 US gal) (including radiator and aftertreatment) Length mm (56.4 in) Width mm (31.3 in) Height mm (45.3) Dry weight kg (1543 lb) Rating Power Type kw hp C C Increased power and torque over Tier 3/Stage IIIA engine Compact package Extensive choice of options Installation flexibility Non modular aftertreatment Maintenance-free valve adjustment Poly-vee belts for longer service intervals Series turbochargers with smart wastegate for increased performance Engine mounted DPF Can be factory installed without DPF Sound improvement over Tier 3/Stage IIIA engine Increased power Compact package Extensive choice of options Installation flexibility Maintenance-free valve adjustment Poly-vee belts for longer service intervals Series turbocharger for increased performance Meets EU Stage IIIB / U.S. EPA Tier 4 Interim / Japan 2011 (Tier 4 Interim) equivalent emissions standards Meets EU Stage IIIB / U.S. EPA Tier 4 Interim / Japan 2011 (Tier 4 Interim) equivalent emissions standards 40 Perkins Guide Guide Perkins 41

22 Highly Regulated 1204E Aftertreatment Highly Regulated 1204F-E44TA Excludes inlet and outlet connections. Aftertreatment Module DOC - Diesel Oxidation Catalyst DPF - Diesel Particulate Filter supplied, with a range of inlet and outlet options No ash service requirement, low temperature regeneration 3" flex pipe kits available with a variety of elbow options for turbocharger connection 82 kw (110 hp) > 82 kw (110 hp) Length mm (31.6 in) 828 mm (32.6 in) Width 365 mm (14.3 in) 365 mm (14.3 in) Height 279 mm (11 in) mm (11.8 in) Diameter mm (9.6 in) mm (10.6 in) Weight 34 kg (75 lb) 37 kg (81.6 lb) The DPF technology chosen is a wall flow filter configuration. This enables the engine to be optimised for superior performance and low fuel consumption Using our advanced research and development techniques, we have perfectly matched the aftertreatment to the engine. The engine performance has then been optimised to give the maximum power and the regeneration is invisible to the operator Remote and engine-mounted installation options provide OEM flexibility for many applications Aftertreatment designed to be service-free (minimum 8,000 hours) Number of cylinders... 4 in-line Bore and stroke x 127 mm (4.13 x 5.0 in) Displacement litres (268.5 cubic in) Compression ratio :1 Total lubricating capacity litres ( US gal) Total coolant capacity litres (2.85 US gal)... Length mm (33.3 in) Width mm (30.4 in) Height mm (33.4 in) Dry weight kg (882 lb) C C C B B B C C C C Fuel consumption optimised to match operating cycle of a wide range of applications Compact package Extensive choice of options Installation flexibility Service-free aftertreatment Maintenance-free valve adjustment Poly-vee belts for longer service intervals EU Stage IV / U.S. EPA Tier 4 Final / Japan 2014 (Tier 4 Final) emissions standards 42 Perkins Guide Guide Perkins 43

23 Highly Regulated 1204F-E44TA Power Unit Highly Regulated 1204F-E44TTA Bore and stroke x 127 mm (4.13 x 5 in) Displacement litres (268.5 cubic in) Cycle... 4 stroke Compression ratio :1 Cooling system... Liquid Total lubricating capacity litres ( US gal) Total coolant capacity litres (2.85 US gal) (including aftertreatment) Length mm (56.4 in) Width mm (32.2 in) Height mm (47.8 in) Dry weight kg (1477 lb) Speed Torque rpm Nm (lb. rpm C C B C C Bore and stroke x 127 mm (4.13 x 5.0 in) Displacement litres (268.5 cubic in) Aspiration... Series turbocharged aftercooled Cycle... 4 stroke Compression ratio :1 Rotation...Anti-clockwise viewed from flywheel Cooling system... Liquid Total lubricating capacity litres ( US gal) Total coolant capacity litres (2.85 US gal) Length mm (33.3 in) Width mm (29.1 in) Height mm (34.1 in) Dry weight kg (926 lb) Speed rpm C C C C Fuel consumption optimised to match operating cycle of a wide range of applications Compact package Extensive choice of options Installation flexibility Service-free aftertreatment Maintenance-free valve adjustment Poly-vee belts for longer service intervals Fuel consumption optimised to match operating cycle of a wide range of applications Compact package Extensive choice of options Installation flexibility Service-free aftertreatment Maintenance-free valve adjustment Poly-vee belts for longer service intervals Series turbochargers with smart wastegate for increased performance DOC/SCR aftertreatment fitted as standard; DPF option available EU Stage IV / U.S. EPA Tier 4 Final / Japan 2014 (Tier 4 Final) emissions standards EU Stage IV / U.S. EPA Tier 4 Final / Japan 2014 (Tier 4 Final) emissions standards 44 Perkins Guide Guide Perkins 45

24 Highly Regulated 1204F-E44TTA Power Unit DOC/SCR Highly Regulated 1204F Aftertreatment 2: Width Bore and stroke x 127 mm (4.13 x 5 in) Displacement litres (268.5 cubic in) Aspiration.... Series turbocharged aftercooled Cycle... 4 stroke Compression ratio :1 Cooling system... Liquid Total lubricating capacity litres ( US gal) Total coolant capacity litres (2.85 US gal) (including aftertreatment) Length mm (57.2 in) Width mm (34.2 in) Height mm (50.3 in) Dry weight kg (1543 lb) Speed Torque rpm Nm (lb. rpm C C Fuel consumption optimised to match operating cycle of a wide range of applications Compact package Extensive choice of options Installation flexibility Service-free aftertreatment Maintenance-free valve adjustment Poly-vee belts for longer service intervals Series turbochargers with smart wastegate for increased performance EU Stage IV / U.S. EPA Tier 4 Final / Japan 2014 (Tier 4 Final) emissions standards 3: Height 1: Length DOC/SCR 92.6 kw (124.2 hp) > 92.6 kw (124.2 hp) 1 Length 647 mm (25.4 in) 675 mm (26.5 in) 2 Width 453 mm (17.8 in) 478 mm (18.8 in) 3 Height 372 mm (14.6 in) 390 mm (15.3 in) Weight 40 kg (88 lb) 45 kg (99 lb). Aftertreatment module factory fitted to engine as standard. Aftertreatment DOC Diesel Oxidation Catalyst SCR - Selective Catalytic Reduction 3 inch flex pipe kits available with a variety of elbow options for turbocharger connection SCR Auxiliaries - A range of tanks and heated lines are available Technology The DOC/SCR technology provides customers with as compact as possible aftertreatment solution Power Using our advanced research and development techniques, we have perfectly matched both aftertreatment systems to the engine. The engine performance has then been optimised to give the application maximum productivity with both aftertreament options being invisible to the machine operator whilst in use Mounting Remote and engine mounted installation options provide customers with flexibility for many applications Service Aftertreatment system is designed to be service-free 46 Perkins Guide Guide Perkins 47

25 Highly Regulated 1204F Aftertreatment 2: Width DPF/SCR Highly Regulated 1206E-E66TA DPF/SCR 48 1: Length TTA product only 1 Length 722 mm (28.4 in) 2 Width 695 mm (21.1 in) 3 Height 430 mm (16.9 in) Aftertreatment Weight 80 kg (176 lb) DOC Diesel Oxidation Catalyst SCR - Selective Catalytic Reduction DPF Diesel Particulate Filter option available 3 inch flex pipe kits available with a variety of elbow options for turbocharger connection SCR Auxiliaries - A range of tanks and heated lines are available Technology The DOC/SCR technology provides customers with as compact as possible aftertreatment solution. DPF/SCR option is available for use on higher power machines Power Using our advanced research and development techniques, we have perfectly matched both aftertreatment systems to the engine. The engine performance has then been optimised to give the application maximum productivity with both aftertreament options being invisible to the machine operator whilst in use Mounting Remote installation options provide customers with flexibility for many applications Service Aftertreatment system is designed to be service-free Perkins Guide 3: Height Number of cylinders...6 in-line Bore and stroke x 127 mm (4.13 x 5.0 in) Displacement litres (402.8 cubic in) Compression ratio :1 Total lubricating capacity litres ( US gal) Total coolant capacity litres (3.6 US gal) Length mm (41.9 in) Width mm (29.6 in) Height mm (35.7 in) Dry weight kg (1532 lb) (bare engine + coolant and lub oil) C C C Increased torque over Tier 3/Stage IIIA engine Compact package Extensive choice of options Installation flexibility Non modular aftertreatment Maintenance-free valve adjustment Poly-vee belts for longer service intervals Meets EU Stage IIIB / U.S. EPA Tier 4 Interim / Japan 2011 (Tier 4 Interim) equivalent emissions standards Guide Perkins 49

26 Highly Regulated 1206E-E66TA Aftertreatment Highly Regulated 1206E-E70TTA Length mm (33.6 in) Width mm (14.3 in) Height mm (13.9 in) Diameter mm (11.1 in) Weight 40 kg (88.1 lb) Aftertreatment module shipped as separate part to be assembled by customer. Aftertreatment Module DOC - Diesel Oxidation Catalyst DPF - Diesel Particulate Filter supplied, with a range of inlet and outlet options No ash service requirement, low temperature regeneration 3" flex pipe kits available with a variety of elbow options for turbocharger connection The DPF technology chosen is a wall flow filter configuration. This enables the engine to be optimised for superior performance and low fuel consumption Using our advanced research and development techniques, we have perfectly matched the aftertreatment to the engine. The engine performance has then been optimised to give the maximum power and the regeneration is invisible to the operator Remote and engine mounted installation options provide OEM Flexibility for many applications Aftertreatment designed to be service-free (minimum 8,000 hours) Number of cylinders...6 in-line Bore and stroke x 135 mm (4.13 x 5.3 in) Displacement litres (427.7 cubic in) Aspiration.... Series turbocharged aftercooled Compression ratio :1 Total lubricating capacity litres ( US gal) Total coolant capacity litres (4.0 US gal) Length mm (41.9 in) Width mm (32.3 in) Height mm (35.7 in) Dry weight kg (1576 lb) (includes electrics and backend) B B B B B C C C Increased power and torque over Tier 3/Stage IIIA engine Compact package Extensive choice of options Installation flexibility Non-modular aftertreatment Maintenance-free valve adjustment Poly-vee belts for longer service intervals Meets EU Stage IIIB / U.S. EPA Tier 4 Interim / Japan 2011 (Tier 4 Interim) equivalent emissions standards 50 Perkins Guide Guide Perkins 51

27 Highly Regulated 1206E-E70TTA Aftertreatment Highly Regulated 1206F-E70TA Aftertreatment module shipped as separate part to be assembled by customer. Aftertreatment Module High Temperature Regeneration System DOC - Diesel Oxidation Catalyst DPF - Diesel Particulate Filter and regeneration system supplied, with a range of inlet and outlet options 3 flex pipe connection kit with rotatable elbow for 60 and 90 RS inlet flexibility 172 kw 172 kw Length mm (36.2 in) mm (36.2 in) Width mm (28.1 in) mm (28.1 in) Height mm (24.3 in) mm (25.3 in) Diameter mm (11.3 in) mm (13.3 in) Weight 124 kg (273.4 lb) 134 kg (295.4 lb) The DPF technology chosen is a wall flow filter configuration. This enables the engine to be optimised for superior performance and low fuel consumption Using our advanced research and development techniques, we have perfectly matched the aftertreatment to the engine. The engine performance has then been optimised to give the maximum power and in normal operation, the regeneration is invisible to the operator Flexible regeneration options maximise uptime Remote installation options provide OEM flexibility for many applications 5,000 hour DPF ash service interval Available in 12 or 24 volt systems Number of cylinders...6 in-line Bore and stroke x 135 mm (4.13 x 5.3 in) Displacement litres (427.7 cubic in) Compression ratio :1 Total lubricating capacity litres ( US gal) Total coolant capacity litres (4.0 US gal) Length mm (41.9 in) Width mm (29.6 in) Height mm (35.7 in) Dry weight kg (1576 lb) (includes electrics and backend) B B C Increased power and torque over Tier 3/Stage IIIA engine Compact package Extensive choice of options Installation flexibility Non modular aftertreatment Maintenance-free valve adjustment Poly-vee belts for longer service intervals EU Stage IV / U.S. EPA Tier 4 Final emissions standards 52 Perkins Guide Guide Perkins 53

28 Highly Regulated 1206F-E70TTA Highly Regulated 1206F-E70TTA Power Unit Number of cylinders...6 in-line Bore and stroke x 135 mm (4.13 x 5.3 in) Displacement litres (427.7 cubic in) Aspiration.... Series turbocharged aftercooled Compression ratio :1 Total lubricating capacity litres ( US gal) Total coolant capacity litres (4.0 US gal) (including electrics and backend) Length mm (41.9 in) Width mm (32.3 in) Height mm (35.7 in) Dry weight kg (1576 lb) Rating Type kw Power hp B B C C C D Number of cylinders...6 in-line Bore and stroke x 135 mm (4.13 x 5.3 in) Displacement litres (427.7 cubic in) Aspiration.... Series turbocharged aftercooled Compression ratio :1 Total lubricating capacity litres ( US gal) Total coolant capacity litres (4 US gal) (including electrics and backend) Length mm (69.6 in) Width mm (36.0 in) Height mm (57.5 in) Dry weight kg (2396 lb) Speed Torque rpm Nm (lbf. rpm B B C C C Increased power and torque over Tier 3/Stage IIIA engine Compact package Extensive choice of options Installation flexibility Non-modular aftertreatment Maintenance-free valve adjustment Poly-vee belts for longer service intervals Series turbochargers with smart wastegate available for increased performance Increased power and torque over Tier 3/Stage IIIA engine Compact package Extensive choice of options Installation flexibility Non modular aftertreatment Maintenance-free valve adjustment Poly-vee belts for longer service intervals Series turbochargers with smart wastegate available for increased performance EU Stage IV / U.S. EPA Tier 4 Final emissions standards EU Stage IV / U.S. EPA Tier 4 Final / Japan 2014 (Tier 4 Final) emissions standards 54 Perkins Guide Guide Perkins 55

29 Highly Regulated Highly Regulated 1206F-E70TA/TTA Aftertreatment Front view 799 mm (31.4 in) Top view 770 mm (30.3 in) 799 (31.4 in) 515 (20.3 in) Aftertreatment Module Passive Regeneration System DOC - Diesel Oxidation Catalyst DPF - Diesel Particulate Filter and regeneration system supplied, with a range of inlet and outlet options 3 flex pipe connection kit with rotatable elbow for 60 and 90 RS inlet flexibility The DPF technology chosen is a wall flow filter configuration. This enables the engine to be optimised for superior performance and low fuel consumption Using our advanced research and development techniques, we have perfectly matched the aftertreatment to the engine. The engine performance has then been optimised to give the maximum power and in normal operation, the regeneration is invisible to the operator Remote and engine-mounted installation options provide OEM flexibility for many applications Aftertreatment designed to be service-free Available in 12 or 24 volt systems 56 Perkins Guide Guide Perkins 57

30 Highly Regulated 1706J-E93TA Highly Regulated 1706J-E Aftertreatment 1 Number of cylinders...6 in-line Bore and stroke x 149 mm (4.5 x 5.8 in) Displacement litres (567.5 cubic in) Compression ratio... 17:1 Total lubricating capacity engine only. 30 litres (7.9 US gal) Total coolant capacity engine only litres (5.8 US gal) Length mm (44.3 in) Width mm (31.1 in) Height mm (42.0 in) Dry weight kg (1907 lb) A B C D Proven core engine designs assure reliability and quiet operation Excellent power density, providing opportunities to downsize Fuel consumption optimised to match operating cycle of a wide range of applications EPA Tier 4 Final. Stage V-capable* *as proposed Stage V emissions standards Extensive options choice for installation flexibility Low heat rejection levels to support compact cooling packs Compact design 1 Length 925 mm 36 in 2 Width 694 mm 27 in 3 Height 432 mm 17 in Weight 140 kg lb Aftertreatment DOC Diesel Oxidation Catalyst DPF Diesel Particulate Filter SCR - Selective Catalytic Reduction SCR Auxiliaries - A range of tanks and heated lines are available Technology The DPF technology chosen is a wall flow filter configuration that performs through the whole work cycle of the engine thus allowing it to work efficiently. Power Using our advanced research and development techniques, we have perfectly matched the aftertreatment to the engine. The engine performance has then been optimised to give the maximum power and in normal operation, the regeneration is invisible to the operator. Mounting Compact aftertreatment unit. Ability to mount DOC separately from DPF/SCR. Vertical DPF/SCR options available. Regeneration The Passive Regeneration system reduces any requirements for downtime Perkins Guide Guide Perkins 59

31 Highly Regulated 2206J-E13TA Highly Regulated 2206J-E13TA Aftertreatment Active Regeneration Passive Regeneration* Number of cylinders...6 in-line Bore and stroke x 157 mm (5.1 x 6.1 in) Displacement litres (763 cubic in) Compression ratio :1 Total lubricating capacity litres ( US gal) Total coolant capacity litres (4.9 US gal) Length mm (50.1 in) Width mm (39.2 in) Height mm (44.6 in) Dry weight kg (2520 lb) A B C C D Proven core engine designs assure reliability and quiet operation Simple and efficienct turbocharger provides improved fuel efficiency Fuel consumption optimised to match operating cycle of a wide range of applications Minimum 5,000 hour DPF ash service intervals means EPA Tier 4 Final. Stage V-capable* *as proposed Stage V emissions standards an excellent lifetime of low cost value. Exceptional power density enables standardisation across numerous applications Multiple options available to minimise total package size 1 Length 1077 mm 42.4 in 2 Width 1069 mm 42.1 in 3 Height 654 mm 21.7 in Weight kg Aftertreatment lb 1 Length mm 38.4 in 2 Width mm 37.7 in 3 Height mm 21.5 in Weight 140 kg 308 lb * Available based on application requirements. Please consult with your Perkins representative. DOC Diesel Oxidation Catalyst DPF Diesel Particulate Filter SCR - Selective Catalytic Reduction ECU - Aftertreatment Electronic Control Units SCR Auxiliaries - A range of tanks and heated lines are available Technology The DPF technology chosen is a wall flow filter configuration that performs through the whole work cycle of the engine thus allowing it to work efficiently. Power Using our advanced research and development techniques, we have perfectly matched the aftertreatment to the engine. The engine performance has then been optimised to give the maximum power and in normal operation, the regeneration is invisible to the operator. Mounting Remote installation options provide OEM flexibility for many applications, including horizontal and vertical mounting. Regeneration The active regeneration system maximises fuel efficiency during regeneration. Transparent regeneration for minimum downtime**. **Option available: eliminating requirement for Active Regeneration system based on machine type - please speak to your Perkins representative to advise suitability. 60 Perkins Guide Guide Perkins 61

32 Highly Regulated 2506J-E15TA Highly Regulated 2506J-E15TA Aftertreatment Number of cylinders...6 in-line Bore and stroke x 171 mm (5.4 x 6.7 in) Displacement litres (928 cubic in) Compression ratio :1 Total lubricating capacity litres (10-19 US gal) Total coolant capacity litres (7 US gal) Length mm (56.6 in) Width mm (38.1 in) Height mm (49.1 in) Dry weight kg ( lb) A B C D Proven core engine designs assure reliability and quiet operation Simple and efficienct turbocharger provides improved fuel efficiency Fuel consumption optimised to match operating cycle of a wide range of applications Minimum 5,000 hour DPF ash service intervals means EPA Tier 4 Final. Stage V-capable* *as proposed Stage V emissions standards an excellent lifetime of low cost value. Exceptional power density enables standardisation across numerous applications Multiple options available to minimise total package size 1 Length 1153 mm 45.4 in 2 Width 1112 mm 43.8 in 3 Height 652 mm 25.7 in Aftertreatment Weight 268 kg lb DOC Diesel Oxidation Catalyst DPF Diesel Particulate Filter SCR - Selective Catalytic Reduction ECU - Aftertreatment Electronic Control Units SCR Auxiliaries - A range of tanks and heated lines are available Technology The DPF technology chosen is a wall flow filter configuration that performs through the whole work cycle of the engine thus allowing it to work efficiently. Power Using our advanced research and development techniques, we have perfectly matched the aftertreatment to the engine. The engine performance has then been optimised to give the maximum power and in normal operation, the regeneration is invisible to the operator. Mounting Remote installation options provide OEM flexibility for many applications, including horizontal and vertical mounting. Regeneration The active regeneration system maximises fuel efficiency during regeneration. Transparent regeneration for minimum downtime. 62 Perkins Guide Guide Perkins 63

33 Highly Regulated 2806J-E18TA/TTA Highly Regulated 2806J-E18TA/TTA Aftertreatment Number of cylinders...6 in-line Bore and stroke x 183 mm (5.7 x 7.2 in) Displacement litres ( cubic in) / Series turbocharged aftercooled** Compression ratio :1 Total lubricating capacity litres ( US gal) Total coolant capacity litres (7 US gal) Length mm (56.6 in) Width mm (38.1 in) Height mm (49.1 in) Dry weight kg ( lb) Speed rpm Aspiration A TA B TA C TA C TTA D TTA Proven core engine designs assure reliability and quiet operation Simple and efficienct turbocharger** provides improved fuel efficiency Fuel consumption optimised to match operating cycle of a wide range of applications Minimum 5,000 hour DPF ash service intervals means an excellent lifetime of low cost value. Exceptional power density enables standardisation across numerous applications Multiple options available to minimise total package size 1 Length 1153 mm 45.4 in 2 Width 1112 mm 43.8 in 3 Height 652 mm 25.7 in Aftertreatment Weight 268 kg lb DOC Diesel Oxidation Catalyst DPF Diesel Particulate Filter SCR - Selective Catalytic Reduction ECU - Aftertreatment Electronic Control Units SCR Auxiliaries - A range of tanks and heated lines are available Technology The DPF technology chosen is a wall flow filter configuration that performs through the whole work cycle of the engine thus allowing it to work efficiently. Power Using our advanced research and development techniques, we have perfectly matched the aftertreatment to the engine. The engine performance has then been optimised to give the maximum power and in normal operation, the regeneration is invisible to the operator. Mounting Remote installation options provide OEM flexibility for many applications, including horizontal and vertical mounting. Regeneration The active regeneration system maximises fuel efficiency during regeneration. Transparent regeneration for minimum downtime. **Series turbocharger configuration only available on specific ratings. EPA Tier 4 Final. Stage V-capable* *as proposed Stage V emissions standards 64 Perkins Guide Guide Perkins 65

34 Lesser Regulated 402D-05 Lesser Regulated 403D-07 Number of cylinders...2 in-line Bore and stroke x 72 mm (2.64 x 2.83 in) Displacement litres (31 cubic in) Aspiration....Naturally aspirated Combustion system... Indirect injection Compression ratio :1 Total lubricating capacity litres (0.5 US gal) Total coolant capacity litres (0.3 US gal) Length mm (16.0 in) Width mm (14.6 in) Height mm (20.6 in) Dry weight kg (126 lb) Rating Type kw Power hp C C C Number of cylinders...3 in-line Bore and stroke x 72 mm (2.64 x 2.83 in) Displacement litres (46.4 cubic in) Aspiration....Naturally aspirated Combustion system... Indirect injection Compression ratio :1 Total lubricating capacity litres (0.8 US gal) Total coolant capacity litres (0.3 US gal) Length mm (18.9 in) Width mm (14.6 in) Height mm (20.8 in) Dry weight kg (156.5 lb) Rating Type kw Power hp C C C Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power Meets U.S. EPA Tier 4 Interim equivalent emissions standards Meets U.S. EPA Tier 4 Interim equivalent emissions standards 66 Perkins Guide Guide Perkins 67

35 Lesser Highly Regulated 403D-11 Lesser Regulated 403D-11 Power Unit Number of cylinders...3 in-line Bore and stroke x 81 mm (3.0 x 3.2 in) Displacement litres (69 cubic in) Aspiration....Naturally aspirated Combustion system... Indirect injection Compression ratio... 23:1 Total lubricating capacity litres (1.3 US gal) Total coolant capacity litres (0.5 US gal) Length mm (19.3 in) Width mm (15.7 in) Height mm (22.7 in) Dry weight kg (191 lb) C Rating - Power kw hp Derate Number of cylinders...3 in-line Bore and stroke x 81 mm (3.0 x 3.2 in) Displacement litres (69 cubic in) Aspiration....Naturally aspirated Combustion system... Indirect injection Compression ratio :1 Total lubricating capacity litres (1.3 US gal) Total coolant capacity litres (1.4 US gal) Length mm (30.6 in) Width mm (17.2 in) Height mm (28.7 in) Dry weight kg (284.4 lb) Rating kw hp Intermittent C Continuous Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power Meets EU Stage IIIA / U.S. EPA Tier 4 Interim equivalent emissions standards Meets EU Stage IIIA / U.S. EPA Tier 4 Interim equivalent emissions standards 68 Perkins Guide Guide Perkins 69

36 Lesser Highly Regulated 403D-15 Lesser Regulated 403D-15 Power Unit Number of cylinders...3 in-line Bore and stroke x 90 mm (3.3 x 3.5 in) Displacement litres (91 cubic in) Aspiration....Naturally aspirated Combustion system... Indirect injection Compression ratio :1 Total lubricating capacity... 6 litres (1.6 US gal) Total coolant capacity litres (0.6 US gal) Length mm (22.5 in) Width mm (17.8 in) Height mm (25.3 in) Dry weight kg (328.5 lb) Rating Type kw Power hp C C C C C Number of cylinders...3 in-line Bore and stroke x 90 mm (3.3 x 3.5 in) Displacement litres (91 cubic in) Aspiration....Naturally aspirated Combustion system... Indirect injection Compression ratio :1 Total lubricating capacity... 6 litres (1.6 US gal) Total coolant capacity litres (1.6 US gal) Length mm (32.3 in) Width mm (19.6 in) Height mm (31.2 in) Dry weight kg (434 lb) Power kw hp Intermittent C Continuous Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power Meets EU Stage IIIA / U.S. EPA Tier 4 Interim equivalent emissions standards Meets EU Stage IIIA / U.S. EPA Tier 4 Interim equivalent emissions standards 70 Perkins Guide Guide Perkins 71

37 Lesser Highly Regulated 403D-15T Lesser Regulated 403D-17 Number of cylinders...3 in-line Bore and stroke x 90 mm (3.3 x 3.5 in) Displacement litres (91 cubic in) Aspiration.... Turbocharged Combustion system... Indirect injection Compression ratio :1 Total lubricating capacity... 6 litres (1.6 US gal) Total coolant capacity litres (0.7 US gal) Length mm (22.5 in) Width mm (21.3 in) Height mm (25.3 in) Dry weight kg (345 lb) C C C C C Number of cylinders...3 in-line Bore and stroke x 100 mm (3.3 x 3.9 in) Displacement litres (101 cubic in) Aspiration....Naturally aspirated Combustion system... Indirect injection Compression ratio... 23:1 Total lubricating capacity... 6 litres (1.6 US gal) Total coolant capacity litres (0.6 US gal) Length mm (22.2 in) Width mm (17.8 in) Height mm (25.7 in) Dry weight kg (352.7 lb) C C Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power Meets EU Stage IIIA / U.S. EPA Tier 4 Interim equivalent emissions standards Meets EU Stage IIIA / U.S. EPA Tier 4 Interim equivalent emissions standards 72 Perkins Guide Guide Perkins 73

38 Lesser Highly Regulated 404D-22 Lesser Regulated 404D-22 Power Unit Bore and stroke x 100 mm (3.3 x 3.9 in) Displacement litres (135 cubic in) Aspiration....Naturally aspirated Combustion system... Indirect injection Compression ratio :1 Total lubricating capacity litres (2.8 US gal) Total coolant capacity litres (2.3 US gal) Length mm (26.0 in) Width mm (18.3 in) Height mm (26.6 in) Dry weight kg (406 lb) C Rating - Power kw hp Derate Balanced Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power Bore and stroke x 100 mm (3.3 x 3.9 in) Displacement litres (135 cubic in) Aspiration....Naturally aspirated Combustion system... Indirect injection Compression ratio :1 Total lubricating capacity litres (2.8 US gal) Total coolant capacity litres (1.8 US gal) Length mm (37.2 in) Width mm (20.2 in) Height mm (33.6 in) Dry weight kg (480.6 lb) C Rating - Power kw hp Intermittent C Continuous Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power Meets EU Stage IIIA and U.S. EPA Tier 4 Interim equivalent emissions standards Meets EU Stage IIIA and U.S. EPA Tier 4 Interim equivalent emissions standards 74 Perkins Guide Guide Perkins 75

39 Lesser Highly Regulated 404D-22T Lesser Regulated 404D-22T Power Unit Bore and stroke x 100 mm (3.3 x 3.9 in) Displacement litres (135 cubic in) Aspiration.... Turbocharged Combustion system... Indirect injection Compression ratio :1 Total lubricating capacity litres (2.8 US gal) Total coolant capacity litres (2.3 US gal) Length mm (26.0 in) Width mm (19.3 in) Height mm (27.5 in) Dry weight kg (427.7 lb) C Rating - Power kw hp Derate Balanced Bore and stroke x 100 mm (3.3 x 3.9 in) Displacement litres (135 cubic in) Aspiration.... Turbocharged Combustion system... Indirect injection Compression ratio :1 Total lubricating capacity litres (2.8 US gal) Total coolant capacity litres (1.8 US gal) Length mm (38.3 in) Width mm (23.2 in) Height mm (38.3 in) Dry weight kg (502.6 lb) Power kw hp Intermittent C Continuous Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power Meets EU Stage IIIA and U.S. EPA Tier 4 Interim equivalent emissions standards Meets EU Stage IIIA and U.S. EPA Tier 4 Interim equivalent emissions standards 76 Perkins Guide Guide Perkins 77

40 Lesser Highly Regulated 404D-22TA Lesser Regulated 404D-22TA Power Unit Bore and stroke x 100 mm (3.3 x 3.9 in) Displacement litres (135 cubic in) Combustion system... Indirect injection Compression ratio :1 Total lubricating capacity litres (2.8 US gal) Total coolant capacity litres (1.0 US gal) Length mm (26.0 in) Width mm (19.3in) Height mm (27.5 in) Dry weight kg (427.7 lb) C Bore and stroke x 100 mm (3.3 x 3.9 in) Displacement litres (135 cubic in) Combustion system... Indirect injection Compression ratio :1 Total lubricating capacity litres (2.8 US gal) Total coolant capacity litres (3.1 US gal) Length mm (41.3 in) Width mm (28.0 in) Height mm (39.3 in) Dry weight kg (665.8 lb) Power kw hp Intermittent C Continuous Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power Extensive range of options Ultra compact size Easy routine servicing High power density Low installed costs 500 hour service interval Low fuel consumption Quiet and refined power Meets EU Stage IIIA and U.S. EPA Tier 4 Interim equivalent emissions standards Meets EU Stage IIIA and U.S. EPA Tier 4 Interim equivalent emissions standards 78 Perkins Guide Guide Perkins 79

41 Lesser Highly Regulated 904D-E28T Lesser Regulated 904D-E28TA Bore and stroke x 110 mm (3.5 x 4.3 in) Displacement litres (171 cubic in) Aspiration.... Turbocharged Compression ratio... 17:1 Total lubricating capacity litres (1.9 US gal) Total coolant capacity litres (1 US gal) Length mm (25.0 in) Width mm (22.1 in) Height mm (30.2 in) Dry weight kg (540 lb) Rating kw hp Type C Bore and stroke x 110 mm (3.5 x 4.3 in) Displacement litres (171 cubic in) Compression ratio... 17:1 Total lubricating capacity engine only 7.5 litres (1.9 US gal) Total coolant capacity engine only litres (1 US gal) Length mm (25.0 in) Width mm (22.1 in) Height mm (30.2 in) Dry weight kg (540 lb) Rating kw hp Type C C High torque... even at low speeds 4 valve per cylinder for fuel consumption and performance Extensive options choice for installation flexibility Suitable for high integrated machines Rear gear train for durability and low noise Compact design High torque... even at low speeds 4 valve per cylinder for fuel consumption and performance Extensive options choice for installation flexibility Suitable for high integrated machines Rear gear train for durability and low noise Compact design Meets U.S. EPA Tier 3 equivalent emissions standards Meets U.S. EPA Tier 3 equivalent emissions standards 80 Perkins Guide Guide Perkins 81

42 Lesser Highly Regulated Lesser Regulated 904D-E36TA Bore and stroke x 120 mm (3.9 x 4.7 in) Displacement litres (220 cubic in) Compression ratio... 17:1 Total lubricating capacity engine only. 9 litres (2.3 US gal) Total coolant capacity engine only litres (1 US gal) Length mm (26.3 in) Width mm (22.4 in) Height mm (30.6 in) Dry weight kg (606.3 lb) B C C D High torque... even at low speeds 4 valve per cylinder for fuel consumption and performance Extensive options choice for installation flexibility Suitable for high integrated machines Rear gear train for durability and low noise Compact design Meets U.S. EPA Tier 3 equivalent emissions standards 82 Perkins Guide Guide Perkins 83

43 Lesser Highly Regulated 1103C-33T Lesser Regulated 1103D-33 Number of cylinders...3 in-line Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (202 cubic in) Aspiration.... Turbocharged Compression ratio :1 Total coolant capacity litres (1.2 US gal) Length mm (21.5 in) Width mm (23.0 in) Height mm (32.5 in) Dry weight kg (646 lb) Number of cylinders...3 in-line Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (202 cubic in) Aspiration....Naturally aspirated Compression ratio :1 Total coolant capacity litres (1.2 US gal) Length mm (21.5 in) Width mm (22.5 in) Height mm (32.5 in) Dry weight kg (582 lb) C C Mechanical fuel injection for ease of service Designed for compact industrial and agricultural applications High quality oil and fuel filtration improves reliability and durability Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Mechanical fuel injection for ease of service Designed for compact industrial and agricultural applications High quality oil and fuel filtration improves reliability and durability Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Meets EU Stage II and U.S. EPA Tier 2 equivalent emissions standards Meets EU Stage IIIA equivalent emissions standards 84 Perkins Guide Guide Perkins 85

44 Lesser Highly Regulated 1103D-33TA Lesser Regulated 1104A-44 Number of cylinders...3 in-line Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (202 cubic in) Compression ratio :1 Total coolant capacity litres (1.2 US gal) Length mm (21.5 in) Width mm (23.0 in) Height mm (32.5 in) Dry weight kg (608.5 lb) Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Aspiration.... Naturally Aspirated Compression ratio :1 Total coolant capacity litres (1.9 US gal) Length mm (30.2 in) Width mm (22.0 in) Height mm (31.2 in) Dry weight kg (787 lb) C C Mechanical fuel injection for ease of service Designed for compact industrial and agricultural applications High quality oil and fuel filtration improves reliability and durability Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Mechanical fuel injection for ease of service High quality oil and fuel filtration improves reliability and durability Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Meets EU Stage IIIA equivalent emissions standards 86 Perkins Guide Guide Perkins 87

45 Lesser Highly Regulated 1104A-44T Lesser Regulated 1104C-44 Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Aspiration.... Turbocharged Compression ratio :1 Total coolant capacity litres (1.9 US gal) Length mm (30.9 in) Width mm (37.3 in) Height mm (31.2 in) Dry weight kg (820.1 lb) Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Aspiration....Naturally aspirated Compression ratio :1 Total coolant capacity litres (1.9 US gal) Length mm (26.1 in) Width mm (18.5 in) Height mm (32.0 in) Dry weight kg (787 lb) C C Mechanical fuel injection for ease of service High quality oil and fuel filtration improves reliability and durability Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Mechanical fuel injection for ease of service High quality oil and fuel filtration improves reliability and durability Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Meets EU Stage II and U.S. EPA Tier 2 equivalent emissions requirements 88 Perkins Guide Guide Perkins 89

46 Lesser Highly Regulated 1104C-44 Power Unit Lesser Regulated 1104C-44T Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Aspiration....Naturally aspirated Compression ratio :1 Total lubricating capacity litres (2.2 US gal) Total coolant capacity litres (4.0 US gal) Length mm (45.7 in) Width mm (24.5 in) Height mm (37.9 in) Dry weight kg ( lb) C Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Aspiration.... Turbocharged Compression ratio :1 Total coolant capacity litres (1.9 US gal) Length mm (26.1 in) Width mm (23.5 in) Height mm (32.0 in) Dry weight kg (820.1 lb) C Mechanical fuel injection for ease of service Cooling packs matched to meet the needs of high ambient temperature locations High quality oil and fuel filtration improves reliability and durability Simple plug and play installation requires minimal engineering, ideal for low volume / bespoke applications Noise optimised for operator comfort and reduced machine noise attenuation Mechanical fuel injection for ease of service High quality oil and fuel filtration improves reliability and durability Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Meets EU Stage II / U.S. EPA Tier 2 equivalent emissions standards Meets EU Stage II / U.S. EPA Tier 2 equivalent emissions standards 90 Perkins Guide Guide Perkins 91

47 Lesser Highly Regulated 1104C-44T Power Unit Lesser Regulated 1104C-44TA Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Aspiration.... Turbocharged Compression ratio :1 Total lubricating capacity litres (2.2 US gal) Total coolant capacity litres (4.0 US gal) Length mm (50.0 in) Width mm (24.1 in) Height mm (37.9 in) Dry weight kg (1069 lb) C Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Compression ratio :1 Total coolant capacity litres (1.9 US gal) Length mm (26.1 in) Width mm (24.4 in) Height mm (32.0 in) Dry weight kg (674.6 lb) C Mechanical fuel injection for ease of service Cooling packs matched to meet the needs of high ambient temperature locations High quality oil and fuel filtration improves reliability and durability Simple plug and play installation requires minimal engineering, ideal for low volume / bespoke applications Noise optimised for operator comfort and reduced machine noise attenuation Mechanical fuel injection for ease of service High quality oil and fuel filtration improves reliability and durability Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Meets EU Stage II / U.S. EPA Tier 2 equivalent emissions standards Meets EU Stage II / U.S. EPA Tier 2 equivalent emissions standards 92 Perkins Guide Guide Perkins 93

48 Lesser Highly Regulated 1104C-44TA Power Unit Lesser Regulated 1104D-44 Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Compression ratio :1 Total lubricating capacity litres (2.0 US gal) Total coolant capacity litres (3.3 US gal) Length mm (49.5 in) Width mm (28.4 in) Height mm (39.2 in) Dry weight kg (1100 lb) C Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Aspiration....Naturally aspirated Compression ratio :1 Total coolant capacity litres (1.9 US gal) Length mm (26.1 in) Width mm (18.5 in) Height mm (31.9 in) Dry weight kg (787 lb) C Delivers more low speed Mechanical fuel injection for ease of service Cooling packs matched to meet the needs of high ambient temperature locations High quality oil and fuel filtration improves reliability and durability Simple plug and play installation requires minimal engineering, ideal for low volume / bespoke applications Noise optimised for operator comfort and reduced machine noise attenuation Mechanical fuel injection for ease of service High quality oil and fuel filtration improves reliability and durability Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Meets EU Stage II / U.S. EPA Tier 2 equivalent emissions standards Meets EU Stage IIIA equivalent emissions standards 94 Perkins Guide Guide Perkins 95

49 Lesser Highly Regulated 1104D-44T Lesser Regulated 1104D-44T Power Unit Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Aspiration.... Turbocharged Compression ratio :1 Total lubricating capacity... up to 11 litres* (3.0 US gal) Total coolant capacity litres (1.9 US gal) Length mm (26.1 in) Width mm (23.5 in) Height mm (31.9 in) Dry weight kg (674.6 lb) *Dependent on sump option and gradeability requirements C Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Aspiration.... Turbocharged Compression ratio Total lubricating capacity litres (2.2 US gal) Total coolant capacity litres (4.0 US gal) Length mm (50.2 in) Width mm (27.0 in) Height mm (38.0 in) Dry weight kg ( lb) C Mechanical fuel injection for ease of service High quality oil and fuel filtration improves reliability and durability Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Meets EU Stage IIIA / U.S. EPA Tier 3 equivalent emissions standards Mechanical fuel injection for ease of service Large selection of standard build configurations Cooling packs matched to meet the needs of high ambient temperature locations High quality oil and fuel filtration improves reliability and durability Simple plug and play installation requires minimal engineering, ideal for low volume/bespoke applications Noise optimised for operator comfort and reduced machine noise attenuation Meets EU Stage IIIA / U.S. EPA Tier 3 equivalent emissions standards 96 Perkins Guide Guide Perkins 97

50 Lesser Highly Regulated 1104D-44TA Lesser Regulated 1104D-44TA Power Unit Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Compression ratio :1 Total lubricating capacity... up to 11 litres* (3.0 US gal) Total coolant capacity litres (1.9 US gal) Length mm (26.1 in) Width mm (24.4 in) Height mm (30.5 in) Dry weight kg (674.6 lb) *Dependent on sump option and gradeability requirements C Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Compression ratio Total lubricating capacity litres (2.0 US gal) Total coolant capacity litres (4.5 US gal) Length mm (49.6 in) Width mm (28.9 in) Height mm (38.0 in) Dry weight kg (1250 lb) C Mechanical fuel injection for ease of service Wide range of build options enabling better machine integration High quality oil and fuel filtration improves reliability and durability Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Mechanical fuel injection for ease of service Large selection of standard build configurations Cooling packs matched to meet the needs of high ambient temperature locations High quality oil and fuel filtration improves reliability and durability Simple plug and play installation requires minimal engineering, ideal for low volume/bespoke applications Noise optimised for operator comfort and reduced machine noise attenuation Meets EU Stage IIIA / U.S. EPA Tier 3 equivalent emissions standards Meets EU Stage IIIA / U.S. EPA Tier 3 equivalent emissions standards 98 Perkins Guide Guide Perkins 99

51 Lesser Highly Regulated 1104D-E44T Lesser Regulated 1104D-E44TA Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Aspiration.... Turbocharged Compression ratio :1 Total lubricating capacity...8 litres* (2.1 US gal) Total coolant capacity litres (1.8 US gal) Length mm (24.8 in) Width mm (25.4 in) Height mm (32.4 in) Dry weight kg (794 lb) *Dependent on sump option and gradeability requirements C Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Compression ratio :1 Total lubricating capacity...8 litres* (2.1 US gal) Total coolant capacity litres (1.8 US gal) Length mm (24.8 in) Width mm (24.6 in) Height mm (37.7 in) Dry weight kg (794 lb) *Dependent on sump option and gradeability requirements C C C C C C Electronic fuel injection for improved engine control, delivering enhanced low speed torque and SFC Wide range of build options enabling better machine integration Low heat rejection enables a smaller cooling group and more compact installation Enhanced fuel filtration system provides excellent tolerance to variations in fuel quality Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Electronic fuel injection for improved engine control, delivering enhanced low speed torque and SFC Wide range of build options enabling better machine integration Low heat rejection enables a smaller cooling group and more compact installation Enhanced fuel filtration system provides excellent tolerance to variations in fuel quality Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Meets EU Stage IIIA / U.S. EPA Tier 3 equivalent emissions standards Meets EU Stage IIIA / U.S. EPA Tier 3 equivalent emissions standards 100 Perkins Guide Guide Perkins 101

52 Lesser Highly Regulated 1104D-E44TA Power Unit Lesser Regulated 1106C-70TA Bore and stroke x 127 mm (4.1 x 5.0 in) Displacement litres (269 cubic in) Compression ratio :1 Total lubricating capacity litres (2.2 US gal) Total coolant capacity litres (4.5 US gal) Length mm (53.4 in) Width mm (29.4 in) Height mm (38.1 in) Dry weight kg (1309 lb) C Electronic fuel injection for improved engine control, delivering enhanced low speed torque and SFC Large selection of standard build configurations Cooling packs matched to meet the needs of high ambient temperature locations Low heat rejection enables a smaller cooling group and more compact installation Enhanced fuel filtration system provides excellent tolerance to variations in fuel quality Simple plug and play installation requires minimal engineering, ideal for low volume/bespoke applications Noise optimised for operator comfort and reduced machine noise attenuation Meets EU Stage IIIA / U.S. EPA Tier 3 equivalent emissions standards Number of cylinders... Vertical in-line 6 cylinder Bore and stroke x 135 mm (4.13 x 5.3 in) Displacement litres (427.7 cubic in) Compression ratio :1 Engine rotation...anti-clockwise viewed from flywheel Total lubrication capacity litres ( US gal) Total coolant capacity litres (4.0 US gal) Length mm (42.3 in) Width mm (28.3 in) Height mm (32.4 in) Dry weight kg (1551 lb). Rating Power C C C C C Mechanical fuel injection for ease of service Wide range of build options enabling better machine integration High quality oil and fuel filtration improves reliability and durability Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Meets EU Stage II / U.S. EPA Tier 2 equivalent emissions standards 102 Perkins Guide Guide Perkins 103

53 Lesser Highly Regulated 1106D-70TA Lesser Regulated 1106D-E70TA Number of cylinders... Vertical in-line 6 cylinder Bore and stroke x 135 mm (4.13 x 5.3 in) Displacement litres (427.7 cubic in) Compression ratio :1 Engine rotation...anti-clockwise viewed from flywheel Total lubrication capacity litres ( US gal) Total coolant capacity litres (4.0 US gal) Length mm (42.3 in) Width mm (28.3 in) Height mm (32.4 in) Dry weight kg (1551 lb). Rating Type kw Power hp C C C Number of cylinders...6 in-line Bore and stroke x 135 mm (4.13 x 5.3 in) Displacement litres (427.7 cubic in) Compression ratio :1 Total lubricating capacity litres ( US gal) Total coolant capacity litres (4 US gal) Length mm (36.5 in) Width mm (26.2 in) Height mm (32.2 in) Dry weight kg (1115 lb) C C C C C C C C Mechanical fuel injection for ease of service Wide range of build options enabling better machine integration High quality oil and fuel filtration improves reliability and durability Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Electronic fuel injection for improved engine control, delivering enhanced low speeed torque and SFC Wide range of build options enabling better machine integration Low heat rejection enables a smaller cooling group and more compact installation Enhanced fuel filtration system provides excellent tolerance to variations in fuel quality Common installation across 1100 machine range Noise optimised for operator comfort and reduced machine noise attenuation Meets EU Stage IIIA / U.S. EPA Tier 3 equivalent emissions standards Meets EU Stage IIIA / U.S. EPA Tier 3 equivalent emissions standards 104 Perkins Guide Guide Perkins 105

54 Lesser Highly Regulated 1106D-E70TA Power Unit Number of cylinders... Vertical in-line 6 cylinder Bore and stroke x 135 mm (4.13 x 5.3 in) Displacement litres (427.7 cubic in) Compression ratio :1 Engine rotation...anti-clockwise viewed from flywheel Total lubrication capacity litres ( US gal) Total coolant capacity litres (4.0 US gal) Length mm (68 in) Width mm (31 in) Height mm (44.9 in) Dry weight kg (1737 lb). Rating Type kw Power hp C C C C C C Electronic fuel injection for improved engine control, delivering enhanced low speed torque and SFC Large selection of standard build configurations Cooling packs matched to meet the needs of high ambient temperature locations Low heat rejection enables a smaller cooling group and more compact installation Enhanced fuel filtration system provides excellent tolerance to variations in fuel quality Simple plug and play installation requires minimal engineering, ideal for low volume/bespoke applications Noise optimised for operator comfort and reduced machine noise attenuation Meets EU Stage IIIA / U.S. EPA Tier 3 equivalent emissions standards 106 Perkins Guide Guide Perkins 107

55 Lesser Highly Regulated 2206D-E13TA Lesser Regulated 2506D-E15TA Number of cylinders...6 in-line Bore and stroke x 157 mm (5.1 x 6.1 in) Displacement litres (763 cubic in) Compression ratio :1 Total lubricating capacity litres ( US gal) Total coolant capacity litres (3.8 US gal) Length mm (50.9 in) Width mm (41.5 in) Height mm (46.6 in) Dry weight kg (2509 lb) Number of cylinders...6 in-line Bore and stroke x 171 mm (5.4 x 6.7 in) Displacement litres (928 cubic in) Compression ratio :1 Total lubricating capacity litres ( US gal) Length mm (54.2 in) Width mm (36.5 in) Height mm (48.3 in) Dry weight kg (3239 lb) Rating kw hp Type A B C D E Rating kw hp Type A B C D E Proven core engine designs assure reliability and quiet operation Simple and efficienct turbocharger provides improved fuel efficiency Fuel consumption optimised to match operating cycle of a wide range of applications Approved for operation on biodiesel* concentrations of up to 20%* 500 hour oil change intervals enables low-cost maintenance Exceptional power density enables standardisation across numerous applications Multiple options available to minimise total package size Proven core engine designs assure reliability and quiet operation Simple and efficienct turbocharger provides improved fuel efficiency Fuel consumption optimised to match operating cycle of a wide range of applications Approved for operation on biodiesel* concentrations of up to 20%* 500 hour oil change intervals enables low-cost maintenance Exceptional power density enables standardisation across numerous applications Multiple options available to minimise total package size *Subject to conformance with ASTM D6751 and EN14214 Meets EU Stage IIIA / U.S. EPA Tier 3 equivalent emissions standards *Subject to conformance with ASTM D6751 and EN14214 Meets EU Stage IIIA / U.S. EPA Tier 3 equivalent emissions standards 108 Perkins Guide Guide Perkins 109

56 Lesser Highly Regulated 2806D-E18TA/TTA Number of cylinders...6 in-line Bore and stroke x 183 mm (5.7 x 7.2 in) Displacement litres ( cubic in) / Series turbocharged aftercooled** Compression ratio :1 Total lubricating capacity litres ( US gal) Length mm (54.8 in) Width mm (37.0 in) Height mm (48.9 in) Dry weight kg (3688 lb) Rating Speed kw hp Type rpm Aspiration A TA B TA C TA D TTA E TTA Proven core engine designs assure reliability and quiet operation Simple and efficienct turbocharger provides improved fuel efficiency Fuel consumption optimised to match operating cycle of a wide range of applications Approved for operation on biodiesel* concentrations of up to 20%* 500 hour oil change intervals enables low-cost maintenance Exceptional power density enables standardisation across numerous applications Multiple options available to minimise total package size *Subject to conformance with ASTM D6751 and EN14214 **Series turbocharger configuration only available on specific ratings. Meets EU Stage IIIA / U.S. EPA Tier 3 equivalent emissions standards 110 Perkins Guide Guide Perkins 111

57 Accessories Engine Control Panels The installation of Perkins Industrial Open Power Units (IOPUs) is even easier for our customers because they no longer need to source the engine control panels separately. This small, lightweight and easy-to-use engine control panel can be ordered at the same time as the IOPU. It is a cost-effective component that is entirely compatible with the engine models listed and is fully covered by Perkins warranty system. The rugged engine control panel allows the operator to start and stop the engine, control engine speed, enable or disable regeneration, and monitor vital engine information and diagnostics by using a graphical LCD display. Control Panel Depth mm (3.0 in) Width mm (9.2 in) Height mm (6.4 in) Weight kg (3.7 lb) Engine Control Panel Perkins Part Number: Available for IOPU Models: MK, ML 1204E-E44TTA and 1204E-E44TA JR 854F-E34T JS, JT 854E-E34TA BK 1206E-E66TA BL 1206E-E70TTA * 4* Perkins Part Number: Available for IOPU Models: NP/ NR 1104D-E44T / 1104D-E44TA PW 1106D-E70TA MT / MU 1204F-E44TA / 1204F-E44TTA BM / BN 1206F-E70TA / 1206F-E70TTA ** 4** Perkins Guide Guide Perkins 113