Content s. Dean s Foreword 2. Deputy Dean s Foreword 3. Committee Members 4. Grant Profile 5-216

Size: px
Start display at page:

Download "Content s. Dean s Foreword 2. Deputy Dean s Foreword 3. Committee Members 4. Grant Profile 5-216"

Transcription

1

2 Content s Dean s Foreword 2 Deputy Dean s Foreword 3 Committee Members 4 Grant Profile 5-216

3 Dean s Foreward First and foremost, I would like to congratulate the Research and Industrial Linkage Committee, FKM for taking the initiative to publish Research Grants Profile of the acdemic staff. The faculy has made a compulsory initiative for all acdemic staff to aggresively apply research national and international grants. These research grants acquired by the academic staff members will be reproduced in this publication as a source of reference to the general public and universities. The faculty would also want this publication to be used as a medium for further collaborations with industries and universities locally and abroad. With the initiaitives by the Malaysian Government to encourage researches commercialising research product in the RMK 10 and beyond, we take a proactive approach in coming up with this research grants reference book. Researchers and their project titles from the faculty are potrayed so that the interested parties could communicate between each other to further enhance the research coopertion among them. This Research Grants book will be updated from time-to-time to account for new researchers and research grants acquired by members of faculty. This will bridge and strengthen new and established research collaborations in the short and long term plans of our 5-year faculty strategic planning. I do hope that there will be a two way communication between industries and universities to enhance and enlarge the research circles among the research interest groups in universities and industries. Finally, it is hoped that this book will serve as a reference in identifying, citing, communicating, addressing and sharing common interests in research among local community and abroad. 2

4 Deputy Dean s Foreward Faculty Grant Profile (Faculty of Mechanical Engineering) is a compilation of all grants awarded to the staff by various agencies such the Ministry of Science (MOSTI) and Ministry of Higher Education (MOHE). The data was acquired mainly from the IRES Database developed by the Research Management Institute (RMI), UiTM. The faculty is in debt to these funding agencies for the opportunities given and to RMI for all technical supports lent to us. As a result, there was a 216% increment in the amount of research grant secured from RM443,650 in 2009 to RM1,455,140 in In 2011, the amount of grant received in total was RM1,481,560. For 2012, we are very hopeful that the amount of grant secured will increase further. Based on the proposal submitted for FRGS1/2012 and ERGS1/2012 as well as for e-science, the amount requested for the first quarter of the year is RM2,766,515. This book also serves as a main reference for grant and research documentation requirement by Malaysia Research Assessment (MyRA) exercise. Being a Research Faculty, we have a huge task ahead to accomplish targeted KPI s for all categories defined in MyRA criteria. With the continuous support of all staff and students, UiTM top management, and the funding bodies, we believe that the research initiatives will continue to flourish over many years to come. To the industry and society, please let us know how we can serve you better as an academic institution. We welcome suggestion and comments to improve our academic programs and services to you. To the special committee who assisted me in realizing this book, i would like to express my gratitude for the commitment given. This book is the first book produced this year (2012) but the sixth book since The softcopy of these books are available online at the faculty s website under the RESEARCH menu. Thank you. 3

5 Committee Members PROF. IR. DR. HJ. AHMED JAFFAR ASSOC. PROF. DR. SALMIAH KASALUNG HAZIMIN SAFIQ MOHD MAHSOP MOHD AZROL ZULKEFLI HELMEY RAHMAT NUR FAZLIN AZLINA JAMARI ZARINI MD. SABARI 4

6 ABDUL HALIM ABDULLAH Project No : 600-RMI/ST/DANA 5/3/Dst (229/2009) Head : Primary Stability Of Cemented Hip Arthroplasty: Effects Of Cement Mantle Thickness : Abdul Halim Abdullah Grant : halim.fkm.uitm@gmail.com : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (162/2010) Head : Basic Study Of Interference Screw Fixation Stability In Anterior Cruciate Ligament Reconstruction : Abdul Halim Abdullah Grant / : halim.fkm.uitm@gmail.com : FRGS (S&T) Year Start : Cost (RM) :

7 Project No : 600-RMI/ERGS 5/3 (15/2011) : : Investigation of Binaural beats and Isochronis Tones on Brain Wave Frequency Patterns Member(s) Grant : Abdul Halim Abdullah / : davidfkm@salam.uitm.edu.my / nv_david@yahoo.com : ERGS. Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (143/2011) : Development Of Anthropometric Database Of Malaysian Youth Member(s) Grant : Abdul Halim Abdullah : nursalbiah@salam.uitm.edu.my : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) :

8 ABDUL RAHMAN OMAR Project No : 100-BRC/IRPA 16/6/2 (7/2003) : Development Of Material Handling Techniques To Improve Occupational Health In Malaysian Small And Medium Industries (smis) Head : Abdul Rahman Omar Grant : IRPA Year Start : : aro@salam.uitm.edu.my Cost (RM) : Project No : 100-RMI/SF 16/6/2 (2/2009) : Process Optimization Of Stamping Die Using Response Surface Methodology Method Head : Abdul Rahman Omar / : aro@salam.itm.edu.my Grant : ESCIENCE. Year Start : Cost (RM) :

9 Project No : 600-IRDC/ST 5/3/838 : The Study On The Effect Of Air-fuel Ratio, Temperature And Engine Speed To The Performance Of 1 Cylinder 4 Stroke Diesel Engine Using Artificial Neural Network Abdul Rahman Hemdi : Pulau Pinang (FKM) : rahmanhemdi@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-RMI/PRGS 5/3 (5/2011) : Head / / Grant : PRGS. : Fabrication Of An Ergonomic Safety Shoe Insole:Design,Mould And Process : Abdul Rahman Omar Year Start : Cost (RM) : : aro@salam.uitm.edu.my Project No : IRPA / 48 Head : Application Of Quality Function Development Within A Concurrent Engineering Environment ( ) : Abdul Rahman Omar : aro@salam.uitm.edu.my Grant : IRPA Year Start : Cost (RM) :

10 Project No Head : ST/89 : Retrofitting Computerised Numerical Control (CNC) Milling Machines (Pilot Study) : Abdul Rahman Omar /FKE : Grant : S&T. MOE Year Start : Cost (RM) : Project No : 100-IRDC/IRPA 16/6/2 (1/2004) : Development Of On-line Mechanical Engineering Design And Manufacturing Process Abdul Rahman Omar : juri41@yahoo.com Grant : IRPA Year Start : Cost (RM) : Project No : 100-RMI/SF 16/6/2 (2/2009) : Process Optimization Of Stamping Die Using Response Surface Methodology Abdul Rahman Omar / : aro@salam.itm.edu.my Grant : ESCIENCE. Year Start : Cost (RM) :

11 Project No : 600-BRC/ST 5/3/284 : Electronic Smart Card Reader-itm Version 1 Abdul Rahman Omar : FKE/FKM/FTMSK : zzabidi46@yahoo.com.my Grant : S&T Year Start : Cost (RM) : 0.00 Project No : 600-BRC/ST 5/3/300 : Design and fabrication of a robotic arm for material handling Abdul Rahman Omar /FKE : Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-BRC/ST 5/3/559 : Design And Development Of An E-maintenance System For Building Services Equipments At Ptar 1 Building Abdul Rahman Omar : Grant : S&T. MOE Year Start : Cost (RM) :

12 Project No : IRPA / 45 : New Fuelling Strategies For Port - Injected Spark Ignition Engine Towards Improvement In Fuel Consumption And Exhaust Emission ( ) Abdul Rahman Omar Grant : IRPA Year Start : Cost (RM) : : owche870@salam.uitm.edu.my Project No : ST/107 : Bar Code Reader Abdul Rahman Omar /FKE/FTMSK Grant : S&T. MOE Year Start : Cost (RM) : : zzabidi46@yahoo.com.my 11

13 ADAM TAN MOHD AMIN Project No : 600-RMI/ERGS 5/3 (23/2011) : : Behavioral Self-Optimization using Distributed Cognitive-Reflective-Motoric Loops for Hierarchical Mechatronic Systems Adam Tan Mohd Amin / : low.uitm.gmail.com Grant : ERGS. Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (166/2010) : Modeling And Performance Characterization Of A New Dynamic Ankle Foot Orthosis Adam Tan Mohd Amin / : azmipatar@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

14 Project No : 600-RMI/ST/FRGS 5/3/Fst (256/2010) : A New Architecture Based On Cognitive-reflective-motor Loops For Selfoptimizing Mechatronic Function Modules Adam Tan Mohd Amin / : low.uitm@gmail.com Grant : FRGS (S&T) Year Start : Cost (RM) :

15 AHMAD AZLAN MAT ISA Project No : 600-BRC/ST 5/3/527 Head : Dynamic Characteristics Of Laminated Rotors : Ahmad Azlan Mat Isa Grant : S&T. MOE Year Start : Cost (RM) : : ahmadazlan@salam.uitm.edu.my Project No : 600-BRC/ST 5/3/603 Head : An Investigation Of Dynamic Characteristics Of A Rectangular Cracked Beam : Ahmad Azlan Mat Isa Grant : S&T. MOE Year Start : Cost (RM) : : ahmadazlan@salam.uitm.edu.my. 14

16 Project No : 600-RMI/ST/FRGS 5/3/Fst (32/2008) : Dynamics And Control Underactuated Systems With Applications In Robotics Head : Ahmad Azlan Mat Isa : ahmadazlan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (78/2010) Head : A Study Of Damage Using Ambient Modal Response In 3d Structures : Ahmad Azlan Mat Isa : ahmadazlan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : IRPA / 18 : Application Of Fracture Mechanics Approach To Develop Design Criteria For Eng. Plastics & Their Composites And High Strength Materials Under A Range Of Loading Spectrum In Malaysia Industries Ahmad Azlan Mat Isa : ahmadazlan@salam.uitm.edu.my Grant : IRPA Year Start : Cost (RM) :

17 Project No : 600-IRDC/ST/FRGS.5/3/1176 : The Dynamic Characterization Of Rotating Shaft With Cracks (single Or Multiple) * Ahmad Azlan Mat Isa : zulkiflee_ngah@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) :

18 AHMAD FAIZ ZUBAIR Project No : 600-RMI/ERGS 5/3 (16/2011) : : New Micro-Machining Process Algorithm for 3-Demensional Precision Microelectro-Mechanical System (MEMS) Ahmad Faiz Zubair / : norhayatisaad@yahoo.co.uk / norhayatisaad@salam.uitm.edu.my Grant : ERGS. Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (155/2011) : Numerical Investigator of Flow Behaviour In Anuerysm Ahmad Faiz bin Zubair / : mmazwan@yahoo.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

19 AHMAD KAMIL HUSSAIN Project No : 600-RMI/ST/FRGS 5/3/Fst (157/2010) Head : A New Failure Criterion of Composite Materials : Ahmad Kamil Hussain / / : ahmadkamil@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

20 AHMAD YUSRI ISMAIL Project No : 600-RMI/ST/FRGS 5/3/Fst (109/2010) Head : Adaptive Control For Hybrid-Actuated Robotic Finger : Ahmad Yusri Ismail / : yusri3598@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (179/2009) : Development Of A Hybrid-actuated Robotic Finger With Adaptive Control Ahmad Yusri Ismail : low.uitm@gmail.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

21 AHMED JAAFAR Project No : 100-IRDC/SF 16/6/2(48/2007) Head : Anatomically-corrected-testbed (act) For Anthropomorphic Multifingered Robotics Hand : Ahmed Jaffar : /USM / Grant : ESCIENCE Year Start : Cost (RM) : Project No : 100-IRDC/SF 16/6/2(72/2007) Head : A New Computerized And Automated Grading System For Fresh Fruit Bunches (ffb) In Palm Oil Mill : Ahmed Jaffar /FTMSK/FKK / : Grant : ESCIENCE Year Start : Cost (RM) :

22 Project No Head : 600-BRC/ST.5/3/417 : Development of Flexible Manufacturing System (FMS) Model for Specific Manufacturing Industry : Ahmed Jaffar : Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-IRDC/ ST 5/3/1041 : Development Of The Pick And Place Robotics Chucking System Ahmed Jaffar : ahmedjaffar@salam.uitm.edu.my, ahmedjaffar@yahoo.com : S&T. INTERNAL GRANT PROJEK INI DILULUSKAN DGN SYARAT M'DPT Grant PEMBIAYAAN PERBEZAAN GERAN YG DIPOHON DR OMRON Year Start : Cost (RM) : Project No : 600-IRDC/ST 5/3/761 Head : Development And Improvement Of The Car Seat Polyurethane Injection Moulding Process : Ahmed Jaffar Grant : S&T. MOE Year Start : Cost (RM) : : ahmedjaffar@salam.uitm.edu.my 21

23 Project No : 600-RMI/ST/FRGS 5/3/Fst (86/2010) : New Intelligent Tactile Sensor Principle Using Single Miniature Sensing Element Based on Optical Waveguide Transduction Method Head : Ahmed Jaffar / : ahmedjaffar@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 100-IRDC/SF 16/6/2(70/2007) : A Novel Corrosion Resistant Cast Iron With Optimized Mechanical And Physical Characterization Ahmed Jaffar / : bulan_abd@yahoo.com.sg Grant : ESCIENCE Year Start : Cost (RM) : Project No : 600-RMI/ERGS 5/3 (23/2011) : : Behavioral Self-Optimization using Distributed Cognitive-Reflective-Motoric Loops for Hierarchical Mechatronic Systems Ahmed Jaffar / Grant : ERGS. : low.uitm.gmail.com Year Start : Cost (RM) :

24 Project No : 600-RMI/ST/DANA 5/3/Dst (206/2009) : Integrated Manufacturing Initiatives in Malaysia Automotive Industry Ahmed Jaafar : salmiah99@hotmail.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (124/2010) : New Heat Treatment Technique (Tempering-Austempered In Single Treatment) For Matrix Transformation And Mechanical Properties Of Ductile Iron Ahmed Jaffar / : bulan_abd@yahoo.com.sg Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (126/2010) : New Framework Model of Integrated Total Quality Management (TQM) and Ahmed Jaafar / : salmiah99@hotmail.com Grant : FRGS (S&T). Year Start : Cost (RM) :

25 Project No : 600-RMI/ST/FRGS 5/3/Fst (31/2011) : Human-Robot Interaction (HRI) Algorithm In Robot-Based Intervention Of Children With Autism Spectrum Disorders (ASD) Ahmed Jaffar / / : hanafiah1034@salam.uitm.edu.my/ hanafi3013@hotmail.com Grant : FRGS (S&T). Year Start : Cost (RM) :

26 AIDAH JUMAHAT Project No : 100-IRDC/SF 16/6/2(13/2007) Head : Characterizationof A Novellight-weight Metal Matrix Composite With Nanomaterial Reinforcement : Aidah Jumahat / : aidahjumahat@salam.uitm.edu.my Grant : ESCIENCE Year Start : Cost (RM) : Project No : 600-BRC/ST 5/3/602 Head : Experimental Studies On Cold And Warm Ceramic Powders Compaction Processes: Application To Malaysian Powder Metallurgy Industries : Aidah Jumahat : UKM/FKM Grant : S&T. MOE Year Start : Cost (RM) : : aidahjumahat@salam.uitm.edu.my 25

27 Project No : 600-IRDC/ST 5/3/652 : Simulation Studies On Cold And Warm Compaction Processes Of Iron Powders Using Finite Element Methods Aidah Jumahat : aidahjumahat@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (468/2011) Head : Science Social & Mgmt (SSP) : Tensile And In-Plane Shear Properties Of A Novel Fibre Reinforced Polymer Composite Laminates : Aidah Jumahat / / : aidahjumahat@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : 2000 Project No : 100-IRDC/SF 16/6/2(70/2007) : A Novel Corrosion Resistant Cast Iron With Optimized Mechanical And Physical Characterization Aidah Jumahat / : bulan_abd@yahoo.com.sg Grant : ESCIENCE Year Start : Cost (RM) :

28 Project No : 600-BRC/ST 5/3/497 : Failure Analysis Of Fiber Reinforced Composite Materials Used In Malaysia Industries Aidah Jumahat Grant : S&T. MOE Year Start : Cost (RM) : : jm@salam.uitm.edu.my Project No : 600-IRDC/ST 5/3/859 : Optimization Of Gating System Design In Casting Iron Component By Casting Simulation Aidah Jumahat : bulan_abd@yahoo.com.sg Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-IRDC/ST 5/3/990 : Study On Stability Of A Novel Binder System Based On Palm Oil In Metal Injection Molding (mim) Application Aidah Jumahat : useen8@hotmail.com, muhammadhussain ismail@yahoo.co.uk Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

29 ALIAS MOHD SAMAN Project No : 100-RMI/SF 16/6/2 (1/2009) : Muscle Fatigue Solutions For Prolonged Standing At Workplace Using Electromyography (emg) And Customer Reliability Methodology Member(s) Grant : Alias Mohd Saman : FKPM / : aro@salam.uitm.edu.my : ESCIENCE. Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (162/2010) : Basic Study Of Interference Screw Fixation Stability In Anterior Cruciate Ligament Reconstruction Alias Mohd Saman / : halim.fkm.uitm@gmail.com Grant : FRGS (S&T) Year Start : Cost (RM) :

30 Project No : 600-RMI/ST/DANA 5/3/Dst (148/2011) : Design Optimization Of A Superbike Paddock Stand Through Integrated CAD And CAE System Application Alias Mohd Saman : helmi_rashid@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) :

31 AMALINA AMIR Project No : 600-RMI/ST/FRGS 5/3/Fst (86/2010) : New Intelligent Tactile Sensor Principle Using Single Miniature Sensing Element Based on Optical Waveguide Transduction Method Amalina Amir / : ahmedjaffar@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (251/2010) : Novel Formulation Of Waste Rubber Binder In Producing Net Shaped And Precise M2 Hss Components Amalina Amir / : norainiwahabitm@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) :

32 AMAN MOHD IHSAN MAMAT Project No : 600-IRDC/ ST 5/3/1027 : Thrust Performance Analysis Of A Single Stage Solid Rocket Propellent Aman Mohd Ihsan Mamat : jjunaidah2000@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-IRDC/ST/FRGS.5/3/1177 : Aerodynamics Prediction Of Blended Wing Body (bwb) Of Unmanned Aerial Vehicle (uav) Using Wind Tunnel Experimental Approach * Aman Mohd Ihsan Mamat : wira_wisnoe@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) :

33 Project No : 600-RMI/ST/FRGS 5/3/Fst (31/2008) : Design Parameters For The Development Of Wing Test Ring For Statictest Experiment Aman Mohd Ihsan Mamat : ramzyzan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

34 AMIR RADZI AB. GHANI Project No : 600-RMI/ST/FRGS 5/3/Fst (96/2010) Head : Impact Energy Absorption Of Multi Slotted Column For Automotive Applications : Amir Radzi Ab. Ghani / : amirradzi@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (154/2011) : Crushing Characteristics Of Uniform Column With Trigger Mechanisms Amir Radzi Ab. Ghani : hafizan8085@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) :

35 ANIZAH KALAM Project No : 600-IRDC/ST 5/3/711 Head : A Study On Mechanical Properties And Fatigue Behaviour Of Oil Palm Fruit Bunch Fibre Composite : Anizah Kalam : anizahkalam@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (161/2010) Head : The Effects Of Secondary Filler On The Impact Behavior Of Hybrid Polymer Composites : Anizah Kalam / : anizahkalam@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) :

36 Project No : 100-RMI/SF 16/6/2 (5/2009) : A Non-destructive Technique To Obtain The Tribological Aspects Of Journal Bearing Using Ultrasonic Reflection Measurement Anizah Kalam / : salmiah99@hotmail.com Grant : ESCIENCE. Year Start : Cost (RM) : Project No : 600-IRDC/ST 5/3/686 Member(s) : Thermal Studies Of Li-mn-ca-o Composite System : Anizah Kalam : FSG/UM/FKM : sitihalimahsarijo@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

37 AZIANTI ISMAIL Project No : 600-IRDC/ST/DANA 5/3/Dst (66/2008) : Press Shop Die Handling Investigation Through Simulation * Head : Azianti Ismail : azianti106@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (126/2010) : New Framework Model of Integrated Total Quality Management (TQM) and Lean Manufacturing (LM) for Malaysian Automotive Vendors Azianti Ismail / : salmiah99@hotmail.com Grant : FRGS (S&T). Year Start : Cost (RM) :

38 AZLI ABD RAZAK Project No Head : 600- IRDC/ ST/5/3/1063 : Novel System Of Grading Fresh Fruit Bunches (ffb) Of Oil Palm Fruit : Azli Abd Razak : azlirazak@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 100-IRDC/SF 16/6/2(67/2007) : Impact And Post Impact Properties Of Metal Fibre Composite Materials Azli Abd. Razak /USM/IRDC / : yakubtaib@yahoo.co.uk Grant : ESCIENCE Year Start : Cost (RM) :

39 Project No : 600-IRDC/ST 5/3/988 : Interfacial Toughness And Damage Behavior Of Carbon/glass Fibre Hybrid Composite Member(s) : Azli Abd. Razak : a_kzue@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-IRDC/ST/FRGS.5/3/1295 : Numerical Study Of Heat Transfer Phenomena In Vapor Chamber Member(s) : Azli Abd. Razak : Pulau Pinang (FKM) : Shidee@ppinang.uiym.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) :

40 AZLIN MOHD AZMI Project No : 600-RMI/ST/ 5/3/Rst (9/2009) : Head : Cfd Analysis Of The Effect Of Winglet On Rectangular Wing : Azlin Mohd Azmi : azlinazmi@salam.uitm.edu.my Grant : DAFTAR SAHAJA (S&T). Year Start : Cost (RM) : 0.00 Project No : 100-RMI/SF 16/6/2 (5/2009) : A Non-destructive Technique To Obtain The Tribological Aspects Of Journal Bearing Using Ultrasonic Reflection Measurement Azlin Mohd Azmi / : salmiah99@hotmail.com Grant : ESCIENCE. Year Start : Cost (RM) :

41 Project No : 600-RMI/ERGS 5/3 (22/2011) : : Impedance Induced Circulatory Support on Effective Adjuvant Therapeutic LVAD Azlin Mohd Azmi / Grant : ERGS. Year Start : Cost (RM) : : mazwan@salam.uitm.edu.my Project No : 600-RMI/ST/DANA 5/3/Dst (40/2010) : Finite Element Analysis to Determine the Mechanical Properties of Human Skin Member(s) : Azlin Mohd Azmi : jm@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (40/2011) : Multiphase Transport Pulsation Parameters Measurement Of Bio-Fluid Member(s) : Azlin Mohd Azmi / / : mazwan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

42 BALJIT SINGH BHATAL SINGH Project No : 600-RMI/ST/DANA 5/3/Dst (217/2009) Head : Laboratory Simulation on A Free Flowing River Water Powered Generation of 500w : Baljit Singh Bhatal Singh : baljit@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (156/2010) : Numerical and Analytical Study of Compat Hydrogen PEM Fuel Cells Baljit Singh A/L Bhathal Singh / : wkuntjoro@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) :

43 Project No : 600-RMI/ST/FRGS 5/3/Fst (168/2010) : New Flow Field Configuration And Process Visualization Of A Polymer Electrolyte Membrane Fuel Cell Biopolar Plate In Effective Water Flooding Management Baljit Singh A/L Bhathal Singh / / : hazran883@yahoo.co.uk Grant : FRGS (S&T). Year Start : Cost (RM) :

44 BULAN ABDULLAH Project No : 600-IRDC/ST 5/3/859 : Optimization Of Gating System Design In Casting Iron Component By Casting Simulation Head Member (s) : Bulan Abdullah : : bulan_abd@yahoo.com.sg Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (124/2010) : New Heat Treatment Technique (Tempering-Austempered In Single Treatment) For Matrix Transformation And Mechanical Properties Of Ductile Iron Bulan Abdullah / : bulan_abd@yahoo.com.sg Grant : FRGS (S&T) Year Start : Cost (RM) :

45 Project No : 100-IRDC/SF 16/6/2(70/2007) : A Novel Corrosion Resistant Cast Iron With Optimized Mechanical And Physical Characterization Bulan Abdullah / : bulan_abd@yahoo.com.sg Grant : ESCIENCE Year Start : Cost (RM) : BULAN ABDULLAH Project No : 100-IRDC/SF 16/6/2(13/2007) : Characterizationof A Novellight-weight Metal Matrix Composite With Nanomaterial Reinforcement Bulan Abdullah / : aidahjumahat@salam.uitm.edu.my Grant : ESCIENCE Year Start : Cost (RM) : Project No : 100-IRDC/SF 16/6/2(72/2007) : A New Computerized And Automated Grading System For Fresh Fruit Bunches (ffb) In Palm Oil Mill Member (s) : Bulan Abdullah /FTMSK/FKK / : Grant : ESCIENCE Year Start : Cost (RM) :

46 CHE FARIDAH MAT TALIP Project No : 600-BRC/ST 5/3/301 : Aerodynamic Numeric Modelling Of A Semi Rigid Hang Glider / Ultralight Member (s) : Che Faridah Mat Taib : Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (88/2010) : Performance Characteristics of Lubricant and Wear Characteristics Member (s) : Che Faridah Mat Taib / : salmiahk@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

47 ELI NADIA ABDUL LATIP Project No : 600-RMI/ST/DANA 5/3/Dst (229/2009) : Primary Stability Of Cemented Hip Arthroplasty: Effects Of Cement Mantle Thickness Eli Nadia Abdul Latip : halim.fkm.uitm@gmail.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

48 FARRAHSHAIDA MOHD SALLEH Project No : 600-RMI/ST/FRGS 5/3/Fst (30/2011) : A New Integrated Structure Model Of Staggered-Coupled Micro Resonant Sensor With Simplified Pattern Recognition EngineSystem Member (s) : Farrahshaida Mohd Salleh / / : norhayatisaad@salam.uitm.edu.my/ norhayatisaad@yahoo.co.uk Grant : FRGS (S&T). Year Start : Cost (RM) :

49 FAUZIAH JUNAIDI Project No : 600-RMI/ST/DANA 5/3/Dst (248/2009) Head : Studying Thermal Performance Of Split-type Air-conditioners At Building Reentrant Via Computer Simulation : Fauziah Junaidi : ziah_rai@yahoo.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (125/2010) : New Configuration Of Meso-scale Hollow Cone Rocket Injectors For Improved Swirling Flow Characteristics Fauziah Jerai / : hussein@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) :

50 Project No : 600-RMI/ST/FRGS 5/3/Fst (40/2011) : Multiphase Transport Pulsation Parameters Measurement Of Bio-Fluid Fauziah Jerai / / : mazwan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : BULAN ABDULLAH Project No : 600-RMI/ERGS 5/3 (22/2011) : : Impedance Induced Circulatory Support on Effective Adjuvant Therapeutic LVAD Fauziah Jerai@Junaidi / : mazwan@salam.uitm.edu.my Grant : ERGS. Year Start : Cost (RM) :

51 FAUZIAH MD YUSOF Project No : 600-RMI/ST/FRGS 5/3/Fst (177/2010) : Mechanism Study of The Corrosion Behaviour of Electrodeposited Nanocrystalline Colbalt and its Alloys Using Potentiodynamic Polarization Fauziah Md Yusof / : hyie1105@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) :

52 FREDDAWATI RASHIDDY WONG Project No : 600-RMI/ST/FRGS 5/3/Fst (124/2010) : New Heat Treatment Technique (Tempering-Austempered In Single Treatment) For Matrix Transformation And Mechanical Properties Of Ductile Iron Freddawati Rashiddy Wong / : bulan_abd@yahoo.com.sg Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (206/2011) : Process Temperature Variation Effect To The Mechanical Properties Of C19400 Copper Alloy Material Freddawati Rashiddy Wong : amirul2550@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) :

53 HAFIZAN HASHIM Project No : 600-RMI/ST/DANA 5/3/Dst (154/2011) Head : Crushing Characteristics Of Uniform Column With Trigger Mechanisms : Hafizan Hashim : hafizan8085@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (96/2010) : Impact Energy Absorption Of Multi Slotted Column For Automotive Applications Hafizan Hashim / Grant : amirradzi@salam.uitm.edu.my : FRGS (S&T) Year Start : Cost (RM) :

54 Project No : 600-RMI/ST/FRGS 5/3/Fst (109/2010) : Adaptive Control For Hybrid-Actuated Robotic Finger Hafizan Hashim / : yusri3598@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : BULAN ABDULLAH 53

55 HAFIZI LUKMAN Project No : 600-RMI/ST/DANA 5/3/Dst (154/2011) : Crushing Characteristics Of Uniform Column With Trigger Mechanisms Hafizi Lukman : hafizan8085@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) :

56 HAMIDUN MD ISA Project No : 600-BRC/ST. 5/3/410 Head Grant : Development Of Activated Carbon Based Natural Gas Storage System : Hamidun Md Isa : hamidun@salam.uitm.edu.my : S&T. MOE Year Start : Cost (RM) : Project No : 100-BRC/IRPA 16/6/2 (3/2000) : Direct injection for gasoline engines towards the fuel economy and minimum pollution ( ) Hamidun Md Isa : Grant : IRPA Year Start : Cost (RM) :

57 Project No : ST/109 : Aerothemodynamic Design and Performance Analysis of Gas Turbines: A study of Compressor Fouling Hamidun Md Isa : Grant : S&T. MOE Year Start : Cost (RM) : CHE FARIDAH MAT TALIP 56

58 HANAFIAH YUSSOF Project No : 600-RMI/ST/FRGS 5/3/Fst (31/2011) : Human-Robot Interaction (HRI) Algorithm In Robot-Based Intervention Of Hanafiah Yussof / / : hanafiah1034@salam.uitm.edu.my/ hanafi3013@hotmail.com Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (450/2011) : Modelling Of Miniature Optical Waveguide Tactile Sensing Device Hanafiah Yussof / : hanafi3013@hotmail.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

59 HAYDER M. A. ALI AL-ASSADI Project No : 600-RMI/ST/DANA 5/3/Dst (179/2009) : Development Of A Hybrid-actuated Robotic Finger With Adaptive Control Hayder M. A. Ali Al-Assadi : low.uitm@gmail.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (109/2010) : Adaptive Control For Hybrid-Actuated Robotic Finger Hayder M. A. Ali Al-Assadi / : yusri3598@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

60 Project No : 600-RMI/ST/FRGS 5/3/Fst (32/2008) : Dynamics And Control Underactuated Systems With Applications In Robotics CHE FARIDAH MAT TALIP Hayder M. A. Ali Al-Assadi : ahmadazlan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

61 HAZRAN HUSSAIN Project No : 600-RMI/ST/FRGS 5/3/Fst (168/2010) : New Flow Field Configuration And Process Visualization Of A Polymer Electrolyte Membrane Fuel Cell Biopolar Plate In Effective Water Flooding Management Hazran Husain / / : hazran883@yahoo.co.uk Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (256/2009) : The Characterisation Of Potential Solar Thermal In The Development Of Solar Oven In The Malaysia Climate Hazran Husain : oldtimermiller@gmail.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

62 Project No : 600-RMI/ST/FRGS 5/3/Fst (89/2010) : Investigation Of Structural Features And Fuel Properties Of Bio-chars From Carbonization Of Biomass In Various Pyrolizing Environments And Gas Compositions Hazran Husain / CHE FARIDAH MAT TALIP : ramlanza@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (32/2011) : Computational Analysis On Thermal Stress In Diesel Particulate Filter During Soot Loading And Regeneration Hazran Husain / Grant : nikrosli@salam.uitm.edu.my : FRGS (S&T) Year Start : Cost (RM) :

63 HELMI RASHID Project No : 600-RMI/ST/DANA 5/3/Dst (148/2011) : Design Optimization Of A Superbike Paddock Stand Through Integrated CAD And CAE System Application Helmi Rashid : helmi_rashid@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (162/2010) : Basic Study Of Interference Screw Fixation Stability In Anterior Cruciate Ligament Reconstruction Helmi Rashid / : halim.fkm.uitm@gmail.com Grant : FRGS (S&T) Year Start : Cost (RM) :

64 IDRIS SAAD Project No : 600- IRDC/ ST/5/3/1263 : : Comparison Of Mechanical Properties For Plypropylene (pp) Laminated On Fiberglass/epoxy Resin And Aluminium Net/epoxy Resin Composites Idris Saad : a_kzue@yahoo.com Grant : DAFTAR SAHAJA (S&T). Sendiri Year Start : Cost (RM) : 0.00 Project No : 600-IRDC/ ST 5/3/1049 : Performance Analysis Of A Frictionless Inertial Torque Device For Automative Transmission Idris Saad : ramzyramly@yahoo.com, ramzyzan@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

65 Project No : 100-RMI/SF 16/6/2 (5/2009) : A Non-destructive Technique To Obtain The Tribological Aspects Of Journal Bearing Using Ultrasonic Reflection Measurement Idris Saad / : salmiah99@hotmail.com Grant : ESCIENCE. Year Start : Cost (RM) : CHE FARIDAH MAT TALIP 64

66 ISMAIL NASIRUDDIN AHMAD Project No : 600-BRC/ST.5/3/562 : Evolution Of An Efficient Cutting Process For Shredding Scrap Automobile Tyres Ismail Nasiruddin Ahmad : Pulau Pinang (FKM) : Grant : S&T. MOE Year Start : Cost (RM) : Project No : 100-BRC/IRPA 16/6/2 (7/2003) : Development Of Material Handling Techniques To Improve Occupational Health In Malaysian Small And Medium Industries (smis) Ismail Nasiruddin Ahmad : aro@salam.uitm.edu.my Grant : IRPA Year Start : Cost (RM) :

67 Project No : 600-RMI/ST/FRGS 5/3/Fst (251/2010) : Novel Formulation Of Waste Rubber Binder In Producing Net Shaped And Precise M2 Hss Components Ismail Nasiruddin Ahmad / CHE FARIDAH MAT TALIP : norainiwahabitm@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) :

68 IZDIHAR THARAZI Project No : 600-RMI/PRGS 5/3 (5/2011) : : Fabrication Of An Ergonomic Safety Shoe Insole:Design,Mould And Process Izdihar Tharazi / / Grant : PRGS. Year Start : Cost (RM) : : aro@salam.uitm.edu.my 67

69 JAMALUDDIN MAHMUD Project No : 600-BRC/ST 5/3/497 Head : Failure Analysis Of Fiber Reinforced Composite Materials Used In Malaysia Industries : Jamaluddin Mahmud Grant : jm@salam.uitm.edu.my : S&T. MOE Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (40/2010) : Finite Element Analysis to Determine the Mechanical Properties of Human Skin Jamaluddin Mahmud : jm@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

70 Project No : 100-IRDC/IRPA 16/6/2 (1/2004) : Development Of On-line Mechanical Engineering Design And Manufacturing Process Jamaluddin Mahmud Grant : IRPA : juri41@yahoo.com Year Start : Cost (RM) : CHE FARIDAH MAT TALIP Project No : 600-IRDC/ST 5/3/652 : Simulation Studies On Cold And Warm Compaction Processes Of Iron Powders Using Finite Element Methods Jamaluddin Mahmud Grant Year Start : Cost (RM) : : aidahjumahat@salam.uitm.edu.my : S&T. INTERNAL GRANT Project No : 600-IRDC/ST 5/3/773 : Optimisation Of The Process Control In Thermoplastic Injection Moulding Using Design Of Experiment (doe) Method, Side Mirror Case Study Jamaluddin Mahmud : juri41@yahoo.com, jurisaedon41@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

71 Project No : 600-IRDC/ST 5/3/783 : Optimization of Truss Structure Based on Member Disposition Jamaluddin Mahmud CHE FARIDAH MAT TALIP : wkuntjoro@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-BRC/ST 5/3/517 : Optimization Of Structural Configuration Using Mathematical Programming Jamaluddin Mahmud : wkuntjoro@salam.uitm.edu.my Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-IRDC/ST 5/3/761 : Development And Improvement Of The Car Seat Polyurethane Injection Moulding Process Jamaluddin Mahmud : ahmedjaffar@salam.uitm.edu.my Grant : S&T. MOE Year Start : Cost (RM) :

72 Project No : 600-RMI/ST/FRGS 5/3/Fst (157/2010) : A New Failure Criterion of Composite Materials Jamaluddin Mahmud / / CHE FARIDAH MAT TALIP : ahmadkamil@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (162/2010) : Basic Study Of Interference Screw Fixation Stability In Anterior Cruciate Ligament Reconstruction Jamaluddin Mahmud / : halim.fkm.uitm@gmail.com Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (166/2010) : Modeling And Performance Characterization Of A New Dynamic Ankle Foot Orthosis Jamaluddin Mahmud / : azmipatar@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

73 Project No : 600-RMI/ST/FRGS 5/3/Fst (39/2011) : A New Robust Active Force Algorithm In High Precision Motion Control Jamaluddin Mahmud / CHE FARIDAH MAT TALIP : haniframli@salam.uitm.edu.my / aneh_82@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (468/2011) : Science Social & Mgmt (SSP) : Tensile And In-Plane Shear Properties Of A Novel Fibre Reinforced Polymer Composite Laminates Jamaluddin Mahmud / / : aidahjumahat@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

74 JUNAIDAH RAHMAD Project No : 600-IRDC/ ST 5/3/1027 Head : Thrust Performance Analysis Of A Single Stage Solid Rocket Propellent : Junaidah Rahmad : jjunaidah2000@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-IRDC/ST 5/3/916 : Performance Analysis Of One Stage Solid Propellant Rocket Junaidah Rahmad : wan_mazlina@hitmail.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

75 Project No : 100-RMI/SF 16/6/2 (5/2009) : A Non-destructive Technique To Obtain The Tribological Aspects Of Journal Bearing Using Ultrasonic Reflection Measurement Junaidah Rahmad / CHE FARIDAH MAT TALIP : salmiah99@hotmail.com Grant : ESCIENCE. Year Start : Cost (RM) :

76 JURI SAEDON Project No : 600-IRDC/ST 5/3/773 Head : Optimisation Of The Process Control In Thermoplastic Injection Moulding Using Design Of Experiment (doe) Method, Side Mirror Case Study : Juri Saedon : juri41@yahoo.com, jurisaedon41@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 100-IRDC/IRPA 16/6/2 (1/2004) : Development Of On-line Mechanical Engineering Design And Manufacturing Process Juri Saedon : juri41@yahoo.com Grant : IRPA Year Start : Cost (RM) :

77 Project No : 600-IRDC/ ST 5/3/1042 : Designing And Machining Cng/di Engine Piston Using Reverse Engineering Method Juri Saedon : sukarnur@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : JURI SAEDON Project No : ST/109 : Aerothemodynamic Design and Performance Analysis of Gas Turbines: A study of Compressor Fouling Juri Saedon : Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-RMI/PRGS 5/3 (5/2011) : : Fabrication Of An Ergonomic Safety Shoe Insole:Design,Mould And Process Juri Saedon / / : aro@salam.uitm.edu.my Grant : PRGS. Year Start : Cost (RM) :

78 KAUSALYAH VENKATASON Project No : 600-IRDC/ST 5/3/774 : Natural Frequency Analysis Of A Light Weight Box Structure Kausalyah Venkatason : sahril373@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

79 KOAY MEI HYLE Project No : 600-RMI/ST/FRGS 5/3/Fst (177/2010) : Mechanism Study of The Corrosion Behaviour of Electrodeposited Nanocrystalline Colbalt and its Alloys Using Potentiodynamic Polarization Koay Mei Hyie / : hyie1105@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (19/2009) : Synthesis Of Iron-platinum Nanoparticles In Water-in-oil Microemulsions For High-density Storage Media Application Koay Mei Hyie : hyie1105@yahoo.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

80 Project No : 600-RMI/ST/DANA 5/3/Dst (373/2011) Head : Mechanism Study Of The Corrosion Behaviour And Mechanical Properties Of Electrodeposited Cobalt Alloy Nanoparticles : Koay Mei Hyie : hyie1105@yahoo.com JURI SAEDON Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (491/2011) : Science Social & Mgmt (SSP) : Synthesis And Study On The Mechanical And Tribology Properties Of Cobalt And Cobalt-Nickel-Iron Nanocoating Koay Mei Hyie / / : hyie1105@yahoo.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

81 LOO HUCK SOO Project No Head : 600-IRDC/ST/FRGS.5/3/1332 : Ergonomic Interventions In The Manufacturing Of Air Handlers For Air Conditioning Plants : Loo Huck Soo : jloohs@pd.jaring.my Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 100-RMI/SF 16/6/2 (1/2010) Head : Ergonomic Improvements In Air Handler Manufacturing For Air Conditioning Applications : Loo Huck Soo /MMU / : jloohs@pd.jaring.my Grant : ESCIENCE. Year Start : Cost (RM) :

82 LOW CHENG YEE Project No : 600-RMI/ST/FRGS 5/3/Fst (256/2010) Head / : A New Architecture Based On Cognitive-reflective-motor Loops For Selfoptimizing Mechatronic Function Modules : Low Cheng Yee : low.uitm@gmail.com Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ERGS 5/3 (23/2011) : Head : Behavioral Self-Optimization using Distributed Cognitive-Reflective-Motoric Loops for Hierarchical Mechatronic Systems : Low Cheng Yee / Grant : ERGS. : low.uitm.gmail.com Year Start : Cost (RM) :

83 Project No : 600-RMI/ST/DANA 5/3/Dst (179/2009) : Development Of A Hybrid-actuated Robotic Finger With Adaptive Control Low Cheng Yee : low.uitm@gmail.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-IRDC/ST 5/3/948 : Outdoor Navigation Of Unmanned Ground Vehicles (ugvs): Simulation Analysis Of Traversability Of Tracked Ugvs Low Cheng Yee : maayub@lycos.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (86/2010) : New Intelligent Tactile Sensor Principle Using Single Miniature Sensing Element Based on Optical Waveguide Transduction Method Low Cheng Yee / : ahmedjaffar@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

84 Project No : 600-RMI/ST/FRGS 5/3/Fst (109/2010) : Adaptive Control For Hybrid-Actuated Robotic Finger Low Cheng Yee / Grant : FRGS (S&T). Year Start : Cost (RM) : : yusri3598@salam.uitm.edu.my Project No : 600-RMI/ST/DANA 5/3/Dst (145/2011) : Mechatronic Design For A Fail-Safe Catheter Guide In Blood Circulatory System Low Cheng Yee : tokkura31@yahoo.com Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (450/2011) : Modelling Of Miniature Optical Waveguide Tactile Sensing Device Low Cheng Yee / : hanafi3013@hotmail.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

85 MIMI AZLINA ABU BAKAR Project No : 600-RMI/ST/DANA 5/3/Dst (471/2011) Head : Science Social & Mgmt (SSP) : Fracture Toughness And Impact Behaviour Of Rubber Toughened Epoxy Reinforced Kenaf Fibre/CNTs Hybrid Nanocomposites : Mimi Azlina Abu Bakar / / : mimi_azlina@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : 2000 Project No : 600-IRDC/ST 5/3/1009 : Beam Structure Made Of Oil Palm Fibre-epoxy Composite - Investigation Of Mechanical Properties Mimi Azlina Abu Bakar : davidfkm@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

86 MOHAMAD MAZWAN MAHAT Project No : 600-RMI/ST/FRGS 5/3/Fst (40/2011) Head : Multiphase Transport Pulsation Parameters Measurement Of Bio-Fluid : Mohamad Mazwan Mahat / / : mazwan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ERGS 5/3 (22/2011) : : Impedance Induced Circulatory Support on Effective Adjuvant Therapeutic LVAD Mohamad Mazwan Mahat / : mazwan@salam.uitm.edu.my Grant : ERGS. Year Start : Cost (RM) :

87 Project No : 600-RMI/ST/DANA 5/3/Dst (155/2011) Head : Numerical Investigator of Flow Behaviour In Anuerysm : Mohamad Mazwan Mahat / : mmazwan@yahoo.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

88 MOHAMAD NOR BERHAN Project No : 600-BRC/ST 5/3/337 : Application Of Thermal Energy Storage For Energy Efficiency Mohamad Nor Berhan : berhan@salam.uitm.edu.my Grant : S&T. MOE Year Start : Cost (RM) : Project No : IRPA / 52 : Science Social & Mgmt (SSP) : Development of virtual laboratories for teaching of Mechanical Engineering Mohamad Nor Berhan : Grant : IRPA Year Start : Cost (RM) :

89 Project No : 600-BRC/ST.5/3/326 : Application Of Solar Energy In The Cathodic Protection Of Buried Pipes Mohamad Nor Berhan : Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (155/2010) : Experemental Response Spectrum Investigation Of The Shock Characteristics Of Bio-based Foam Composites Mohamad Nor Berhan / : davidfkm@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (161/2010) : The Effects Of Secondary Filler On The Impact Behavior Of Hybrid Polymer Composites Mohamad Nor Berhan / : anizahkalam@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) :

90 Project No : 600-RMI/ST/FRGS 5/3/Fst (167/2010) : New Properties Of Kenaf Fiber Composite Using Impact Approach Mohamad Nor Berhan / : norfazli@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) :

91 MOHAMED DAHALAN MOHAMED RAMLI Project No : 600-BRC/ST 5/3/499 Head : Linking And Matching Engineering Education With The Requirement Of Industry : Mohamed Dahalan Mohamed Ramli Grant : S&T. MOE Year Start : Cost (RM) : : dr_dahlan@salam.uitm.edu.my Project No : 600-BRC/ST 5/3/604 Head : Application Of Shot Peening Process To Improve Fatigue Life Of Automa- : Mohamed Dahalan Mohamed Ramli Grant : S&T. MOE Year Start : Cost (RM) : : dr_dahlan@salam.uitm.edu.my 90

92 Project No : 100-BRC/IRPA 16/6/2 (9/2003) : Comparison of Physical and Electrical Properties of Textile Composites for Microwave Nondestructive Evaluation. Mohamed Dahalan Mohamed Ramli (Prof. Ir. Dr.) : FKE/FSG/FKM : Grant : IRPA Year Start : Cost (RM) : Project No : 600-BRC/ST 5/3/527 : Dynamic Characteristics Of Laminated Rotors Mohamed Dahalan Mohamed Ramli : ahmadazlan@salam.uitm.edu.my Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-BRC/ST 5/3/581 : Microwave Nondestructive Testing Of Power Transformer Oil For Detecting Deterioration And For Evaluation Of Moisture Content Mohamed Dahalan Mohamed Ramli : FKE : norasimah@salam.uitm.edu.my Grant : S&T. MOE Year Start : Cost (RM) :

93 Project No : 600-RMI/ST/FRGS 5/3/Fst (32/2008) : Dynamics And Control Underactuated Systems With Applications In Robotics Mohamed Dahalan Mohamed Ramli : ahmadazlan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (78/2010) : A Study Of Damage Using Ambient Modal Response In 3d Structures Mohamed Dahalan Mohamed Ramli : ahmadazlan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

94 MOHAMMAD AZZEIM MAT JUSOH Project No : 600-RMI/ST/DANA 5/3/Dst (148/2011) : Design Optimization Of A Superbike Paddock Stand Through Integrated CAD And CAE System Application Mohammad Azzeim Mat Jusoh : helmi_rashid@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) :

95 MOHD AFZAN MOHD ANUAR Project No : 600-RMI/ST/ 5/3/Rst (9/2009) : : Cfd Analysis Of The Effect Of Winglet On Rectangular Wing Member (s) : Mohd Afzan Mohd Anuar Grant : azlinazmi@salam.uitm.edu.my : DAFTAR SAHAJA (S&T). Year Start : Cost (RM) : 0.00 Project No : 600-RMI/ST/FRGS 5/3/Fst (123/2010) : New Approach using PD-active force control (PDAFC) of twin rotor Multi -Input Multi-Output System(TRMS) Mohd Afzan Mohd Anuar / : msuhairil@yahoo.com Grant : FRGS (S&T). Year Start : Cost (RM) :

96 MOHD FAIZAL MOHAMAD Project No : 600-RMI/ST/DANA 5/3/Dst (213/2009) : Investigation on The Phenomenon of Brake Fluid Degradation in Malaysian Environment Mohd Faizal Mohamad : mshahriman@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (246/2009) : Study on Malaysian Driver's Brake Application Characteristics During Emergency Braking Mohd Faizal Mohamad : elan98@gmail.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

97 MOHD HAFIZ MOHD NOH Project No : 600-RMI/ST/DANA 5/3/Dst (153/2009) Head : Aerodynamic Analysis Of Aerofioil Of A Low Wind Speed Wind Turbine By Using Cfd And Wind Tunnel Test : Mohd Hafiz Mohd Noh : mhafiz_noh@yahoo.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ERGS 5/3 (54/2011) : : Swirl Atomization Under Effervescing Mode For Rapid Combustion In Meso- Scale Rocket Mohd Hafiz Mohd Noh / Grant : ERGS Year Start : Cost (RM) : : hussein@salam.uitm.edu.my / hussein_14@yahoo.com 96

98 Project No : 600-RMI/ST/FRGS 5/3/Fst (125/2010) : New Configuration Of Meso-scale Hollow Cone Rocket Injectors For Improved Swirling Flow Characteristics Mohd Hafiz Mohd Noh / : hussein@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) :

99 MOHD HANIF MOHD RAMLI Project No : 600-RMI/ST/DANA 5/3/Dst (156/2011) Head : An Active Force Control (AFC) Based Strategy In High Precision Motion System : Mohd Hanif Mohd Ramli : haniframli@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (39/2011) Head : A New Robust Active Force Algorithm In High Precision Motion Control : Mohd Hanif Mohd Ramli / : haniframli@salam.uitm.edu.my / aneh_82@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) :

100 Project No : 600-RMI/ST/DANA 5/3/Dst (180/2011) : Modeling And Performance Characterization Of A New Dynamic Ankle Foot Orthosis Mohd Hanif Mohd Ramli : azmipatar@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (40/2010) : Finite Element Analysis to Determine the Mechanical Properties of Human Skin Mohd Hanif Mohd Ramli : jm@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (123/2010) : New Approach using PD-active force control (PDAFC) of twin rotor Multi-Input Multi-Output System(TRMS) Mohd Hanif Mohd Ramli / : msuhairil@yahoo.com Grant : FRGS (S&T). Year Start : Cost (RM) :

101 MOHD KHALID BIN HASSAN Project No : 600-BRC/ST.5/3/325 Head : : Performance Of Motorcycle Shock Absorber : Mohd Khalid Hassan Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-BRC/ST 5/3/512 : Development Of Motorcycle Suspension System Test Rig Mohd KhalidHassan (Prof. Madya Ir.) : Grant : S&T. MOE Year Start : Cost (RM) :

102 MOHD NOR AZMI BIN AB PATAR Project No : 600-RMI/ST/FRGS 5/3/Fst (166/2010) Head : Modeling And Performance Characterization Of A New Dynamic Ankle Foot Orthosis : Nor Azmi Ab Patar / : azmipatar@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (180/2011) : Modeling And Performance Characterization Of A New Dynamic Ankle Foot Orthosis Mohd Nor Azmi Ab Patar : azmipatar@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) :

103 Project No : 600-RMI/ST/DANA 5/3/Dst (180/2011) Head : Modeling And Performance Characterization Of A New Dynamic Ankle Foot Orthosis : Mohd Nor Azmi Ab Patar : azmipatar@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (156/2011) : An Active Force Control (AFC) Based Strategy In High Precision Motion System Mohd Nor Azmi Ab Patar : haniframli@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (39/2011) : A New Robust Active Force Algorithm In High Precision Motion Control Mohd Nor Azmi Ab Patar / : haniframli@salam.uitm.edu.my / aneh_82@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) :

104 MOHD SHAHRIMAN BIN ADENAN Project No : 600-RMI/ST/DANA 5/3/Dst (213/2009) Head : Investigation on The Phenomenon of Brake Fluid Degradation in Malaysian Environment : Mohd Shahriman Adenan : mshahriman@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (246/2009) : Study on Malaysian Driver's Brake Application Characteristics During Emergency Braking Mohd Shahriman Adenan : elan98@gmail.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

105 MOHD SUHAIRIL MEON Project No : 600-RMI/ST/FRGS 5/3/Fst (123/2010) Head : New Approach using PD-active force control (PDAFC) of twin rotor Multi- Input Multi-Output System(TRMS) : Mohd Suhairil Meon / : msuhairil@yahoo.com Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (199/2009) Head : Frame Configuration Optimization Using Neural Network : Mohd Suhairil Meon Grant Year Start : Cost (RM) : : msuhairil@yahoo.com : DANA KECEMERLANGAN (S&T). 104

106 Project No : 600-RMI/ST/FRGS 5/3/Fst (157/2010) : A New Failure Criterion of Composite Materials Mohd Suhairil Meon / / : ahmadkamil@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

107 MOHD SYAHAR BIN MOHD SHAWAL Project No : 600-RMI/ST/FRGS 5/3/Fst (89/2010) : Investigation Of Structural Features And Fuel Properties Of Bio-chars From Carbonization Of Biomass In Various Pyrolizing Environments And Gas Compositions Mohd Syahar Mohd Shawal / : ramlanza@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (40/2011) : Multiphase Transport Pulsation Parameters Measurement Of Bio-Fluid Mohd Syahar Mohd Syawal Grant / / : mazwan@salam.uitm.edu.my : FRGS (S&T). Year Start : Cost (RM) :

108 Project No : 600-RMI/ERGS 5/3 (22/2011) : : Impedance Induced Circulatory Support on Effective Adjuvant Therapeutic Mohd Syahar Mohd Syawal / : mazwan@salam.uitm.edu.my Grant : ERGS. Year Start : Cost (RM) :

109 MUHAMMAD AZHAN BIN ANUAR Project No : 600-RMI/ST/FRGS 5/3/Fst (32/2008) : Dynamics And Control Underactuated Systems With Applications In Robotics Muhamad Azhan Anuar : ahmadazlan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (6/2009) : High Static Low Dynamic Stiffness (hslds) Mechanismm On Passive Car Suspension System Muhamad Azhan Anuar : moasri@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

110 Project No : 600-RMI/ST/ 5/3/Rst (9/2009) : : Cfd Analysis Of The Effect Of Winglet On Rectangular Wing Muhamad Azhan Anuar : azlinazmi@salam.uitm.edu.my Grant : DAFTAR SAHAJA (S&T). Year Start : Cost (RM) : 0.00 Project No : 600-RMI/ST/DANA 5/3/Dst (199/2009) : Frame Configuration Optimization Using Neural Network Muhammad Azhan Anuar : msuhairil@yahoo.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (78/2010) : A Study Of Damage Using Ambient Modal Response In 3d Structures Muhamad Azhan Anuar : ahmadazlan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

111 MUHAMAD FAUZI BIN OTHMAN Project No : 600-RMI/ST/FRGS 5/3/Fst (162/2010) : Basic Study Of Interference Screw Fixation Stability In Anterior Cruciate Ligament Reconstruction Muhamad Fauzi Othman Grant / : halim.fkm.uitm@gmail.com : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (147/2011) : Effects of Screw Lenghts On The Primary Stability Of Anterior Cruciate Legament Recontruction Head : Muhamad Fauzi Othman / : aee58@yahoo.com/fauzi7044@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

112 MUHAMMAD AZMI AYUB Project No : 600-IRDC/ST 5/3/948 Head : Outdoor Navigation Of Unmanned Ground Vehicles (ugvs): Simulation Analysis Of Traversability Of Tracked Ugvs : Muhammad Azmi Ayub : maayub@lycos.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No Head : ST/57 : Development Of Soft Ware For Pc-based Machine Vision : Muhamad Azmi Ayub : muhdazmiayub@gmail.com Grant : S&T. MOE Year Start : Cost (RM) :

113 Project No : 600-RMI/ERGS 5/3 (17/2011) : : A Real-Time Optical Tactile Sensor for Soft Tissue Characterization Method Muhammad Azmi Ayub / : Muhammadayub@salam.uitm.edu.my Grant : ERGS. Year Start : Cost (RM) : Project No : 100-IRDC/SF 16/6/2(54/2007) Head : An In-process Robot Calibration Of Serial Link Manipulator Arm Based On A 3-d Machine Vision For Minimal Invasive Orthopedic Surgery Operation : Muhammad Azmi Ayub /FKE / : muhdazmiayub@gmail.com Grant : ESCIENCE Year Start : Cost (RM) : Project No : 600-IRDC/ST/FRGS.5/3/1193 : Renewable Energy From Biogas Generated By Sewage Sludgerelationship Between Sludge Volume And Power Generated Muhammad Azmi Ayub : FKA : aminbaki2@gmail.com Grant : FRGS (S&T) Year Start : Cost (RM) :

114 Project No : 600-IRDC/ ST 5/3/1052 : Integrating Mechatronics Engineering With Entrepreneurship In Outcome- Based Postgraduate Education In Malaysia Muhammad AzmiAyub (Dr.) : roseleena_jaafar@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-BRC/ST 5/3/300 : Design and fabrication of a robotic arm for material handling Muhammad Azmi Ayub : /FKE Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (166/2010) : Modeling And Performance Characterization Of A New Dynamic Ankle Foot Orthosis Muhammad Azmi Ayub / : azmipatar@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

115 Project No : 600-RMI/ST/FRGS 5/3/Fst (39/2011) : A New Robust Active Force Algorithm In High Precision Motion Control Muhammad Azmi Ayub / : haniframli@salam.uitm.edu.my / aneh_82@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) :

116 MUHAMMAD FAIRUZ BIN RAMELI Project No : 600-RMI/ST/FRGS 5/3/Fst (35/2011) : Investigation Of Turbulent Flow Temperature Separation Mechanism Through Rangue-Hilsch Vortex Tube Muhammad Fairuz Remeli / / : fairuz1299@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (76/2010) : New Technique in Micro Channel Geometry Optimization of An Air-Cooled Polymer Electrolyte Membrane Fuel Cell Bipolar Plate Muhammad Fairuz Remeli : rahimatan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

117 Project No : 600-RMI/ST/FRGS 5/3/Fst (2/2011) : Structural Modification Of Polymeric Electrospun/Microporous Zeolite Membrane Muhammad Fairuz Remeli : FSG / / : dalila@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

118 MUHAMMAD HUSSAIN BIN ISMAIL Project No : 600-IRDC/ST 5/3/860 Head : An Investigation Of Rheaological Behavior Of Water Soluble Binder System Fo Metal Injection Molding (mim) Feedstock : Muhammad Hussain Ismail : useen8@hotmail.com, hussain305@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-IRDC/ST 5/3/990 Head : Study On Stability Of A Novel Binder System Based On Palm Oil In Metal Injection Molding (mim) Application : Muhammad Hussain Ismail : useen8@hotmail.com, muhammadhussain ismail@yahoo.co.uk Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

119 Project No : 600-BRC/ST 5/3/459 Head : Characterization Of Homogeneous Feedstock For Metal Injection Molding (mim) Process Grant : S&T. MOE Year Start : Cost (RM) : : Muhammad Hussain Ismail : hussain305@salam.uitm.edu.my Project No : 100-IRDC/SF 16/6/2(13/2007) : Characterizationof A Novellight-weight Metal Matrix Composite With Nanomaterial Reinforcement Muhammad Hussain Ismail / : aidahjumahat@salam.uitm.edu.my Grant : ESCIENCE Year Start : Cost (RM) : Project No : 600-IRDC/ST/FRGS.5/3/1300 : Characterization Of Newly Developed Feedstock In Metal Injection Moulding Application Using Titanium Mix With Palm Stearin Binder System Muhammad Hussain Ismail : enghafiez@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) :

120 Project No : 600-IRDC/ST 5/3/859 : Optimization Of Gating System Design In Casting Iron Component By Casting Simulation Muhammad Hussain Ismail : bulan_abd@yahoo.com.sg Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-IRDC/ST 5/3/959 : Application Of Lamb Waves In Wear Detection On Aluminium Plate Muhammad Hussain Ismail : nrosli75@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

121 MUHD AZIMIN BIN AB GHANI Project No : 600-RMI/ST/DANA 5/3/Dst (468/2011) : Science Social & Mgmt (SSP) : Tensile And In-Plane Shear Properties Of A Novel Fibre Reinforced Polymer Composite Laminates Muhd Azimin Ab Ghani / / : aidahjumahat@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

122 NAZRI MOHAMAD Project No : 600-BRC/ST 5/3/514 Head : Preliminary Micro Aerial Vehicle : Nazri Mohamad : nazarwahidi@yahoo.com Grant : S&T. MOE Year Start : Cost (RM) : Project No Head : 600-BRC/ST.5/3/514 : Micro Aerial Vehicle (mav) : Nazri Mohamad Grant : S&T Year Start : Cost (RM) : 0.00 : nazarwahidi@yahoo.com 121

123 Project No : IRPA / 52 : Science Social & Mgmt (SSP) : Development of virtual laboratories for teaching of Mechanical Engineering subjects ( ) Nazri Mohamad : abdul_razak@pahang.uitm.edu.my Grant : IRPA Year Start Cost (RM) :

124 NIK ROSLI BIN ABDULLAH Project No : 600-IRDC/ST 5/3/959 Head : Application Of Lamb Waves In Wear Detection On Aluminium Plate : Nik Rosli Abdullah : nrosli75@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (32/2011) Head : Computational Analysis On Thermal Stress In Diesel Particulate Filter During Soot Loading And Regeneration : Nik Rosli Abdullah / : nikrosli@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) :

125 Project No : 600-IRDC/ST 5/3/947 : Development Of Dual-mode Fixed Bed Combustion Chamber For Solid Waste Fuels Nik Rosli Abdullah : wanjerm2@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

126 Nik Rozlin Binti Nik Mohd Masdek Project No : 600-RMI/ST/ 5/3/Rst (13/2009) : Head : : Development Of Superplastic Carburizing Using Duplex Stainless Steel : Nik Rozlin Nik Mohd Masdek Grant : DAFTAR SAHAJA (S&T). Year Start : Cost (RM) : 0.00 Project No : 600-RMI/ST/FRGS 5/3/Fst (167/2010) : New Properties Of Kenaf Fiber Composite Using Impact Approach Nik Rozlin Nik Mohd Masdek / : norfazli@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) :

127 Project No : 600-RMI/ST/FRGS 5/3/Fst (177/2010) : Mechanism Study of The Corrosion Behaviour of Electrodeposited Nanocrystalline Colbalt and its Alloys Using Potentiodynamic Polarization Nik Rozlin Nik Mohd Masdek / : hyie1105@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) :

128 Noor Ayuni Che Zakaria Project No : 600-RMI/ST/DANA 5/3/Dst (145/2011) : Mechatronic Design For A Fail-Safe Catheter Guide In Blood Circulatory System Head : Noor Ayuni Che Zakaria : tokkura31@yahoo.com Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (109/2010) : Adaptive Control For Hybrid-Actuated Robotic Finger Noor Ayuni Che Zakaria / : yusri3598@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

129 Project No : 600-RMI/ST/FRGS 5/3/Fst (256/2010) : A New Architecture Based On Cognitive-reflective-motor Loops For Selfoptimizing Mechatronic Function Modules Noor Ayuni Che Zakaria / : low.uitm@gmail.com Grant : FRGS (S&T) Year Start : Cost (RM) :

130 NOOR LEHA ABDUL RAHMAN Project No : 600-RMI/ST/DANA 5/3/Dst (146/2011) Head : A Study On The Rheological Behaviour And Mechanical Properties Of Kenaf/ PP Composite : Noor Leha Abdul Rahman : noorleha3585@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) :

131 NOR AFIFAH BINTI YAHAYA Project No : 600-IRDC/ ST 5/3/1052 : Integrating Mechatronics Engineering With Entrepreneurship In Outcome- Based Postgraduate Education In Malaysia Nor Afifah Yahaya : roseleena_jaafar@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

132 NOR AINI BINTI WAHAB Project No : 100-IRDC/SF 16/6/2 (4/2008) : A New Fuel Cell Powered Aerospace Propulsion System. Nor Aini Wahab / : DRTOMWARD@HOTMAIL.COM Grant : ESCIENCE. Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (161/2010) : The Effects Of Secondary Filler On The Impact Behavior Of Hybrid Polymer Composites Nor Aini Wahab / : anizahkalam@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) :

133 NORAMALINA NORDIN Project No : : 600- IRDC/ ST/5/3/1263 : Comparison Of Mechanical Properties For Plypropylene (pp) Laminated On Fiberglass/epoxy Resin And Aluminium Net/epoxy Resin Composites Nor Amalina Nordin : a_kzue@yahoo.com Grant : DAFTAR SAHAJA (S&T). Sendiri Year Start : Cost (RM) : 0.00 Project No : 600-IRDC/ ST 5/3/1026 : Notch Strength Reduction And Damage Analysis Of Textile Frp Composites Nor Amalina Nordin : a_kzue@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

134 Project No : 600-RMI/ST/FRGS 5/3/Fst (177/2010) : Mechanism Study of The Corrosion Behaviour of Electrodeposited Nanocrystalline Colbalt and its Alloys Using Potentiodynamic Polarization Nor Amalina Nordin / : hyie1105@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (251/2010) : Novel Formulation Of Waste Rubber Binder In Producing Net Shaped And Precise M2 Hss Components Nor Amalina Nordin / : norainiwahabitm@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (146/2011) : A Study On The Rheological Behaviour And Mechanical Properties Of Kenaf/ PP Composite Nor Amalina Nordin : noorleha3585@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) :

135 NOR FAZLI BIN ABDULL MANAN Project No : 600-RMI/ST/FRGS 5/3/Fst (167/2010) Head : New Properties Of Kenaf Fiber Composite Using Impact Approach : Nor Fazli Adull Manan / : norfazli@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (123/2010) : New Approach using PD-active force control (PDAFC) of twin rotor Multi-Input Multi-Output System(TRMS) Nor Fazli Adull Manan / : msuhairil@yahoo.com Grant : FRGS (S&T). Year Start : Cost (RM) :

136 NOR HAFIEZ MOHAMAD NOR Project No Head : 600-IRDC/ST/FRGS.5/3/1300 : Characterization Of Newly Developed Feedstock In Metal Injection Moulding Application Using Titanium Mix With Palm Stearin Binder System : Nor Hafiez Mohamad Nor : enghafiez@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-BRC/ST 5/3/459 : Characterization Of Homogeneous Feedstock For Metal Injection Molding (mim) Process Nor Hafiez Mohd Nor Grant : S&T. MOE Year Start : Cost (RM) : : hussain305@salam.uitm.edu.my 135

137 NOR HAYATI SAAD Project No : 600-BRC/ST 5/3/601 Head : Development Of A Fibre Optic Anemometer : Nor Hayati Saad /FKE : norhayatisaad@salam.uitm.edu.my Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (30/2011) Head : A New Integrated Structure Model Of Staggered-Coupled Micro Resonant Sensor With Simplified Pattern Recognition EngineSystem : Nor Hayati Saad / / : norhayatisaad@salam.uitm.edu.my/ norhayatisaad@yahoo.co.uk Grant : FRGS (S&T). Year Start : Cost (RM) :

138 Project No : 600-RMI/ERGS 5/3 (16/2011) : : New Micro-Machining Process Algorithm for 3-Demensional Precision Microelectro-Mechanical System (MEMS) Nor Hayati Saad / : norhayatisaad@yahoo.co.uk / norhayatisaad@salam.uitm.edu.my Grant : ERGS. Year Start : Cost (RM) : Project No : 600-IRDC/ST 5/3/730 : Development Of Qpec (questionnaire Package For Engineering Curriculum) Ans Sas (statistical Analysis System) To Analyse The Survey [case Study : Market Survey For Curriculum Development Of Bachelor Engineering (hons) In Mechanical (manufacturing)] Nor Hayati Saad /Pulau Pinang : zahurin8084@yahoo.com Grant : IS&T. NTERNAL GRANT Year Start : Cost (RM) : Project No : 600-BRC/ST.5/3/417 : Development of Flexible Manufacturing System (FMS) Model for Specific Manufacturing Industry Nor Hayati Saad : Grant : S&T. MOE Year Start : Cost (RM) :

139 Project No : 600- IRDC/ ST/5/3/1063 : Novel System Of Grading Fresh Fruit Bunches (ffb) Of Oil Palm Fruit Nor Hayati Saad : azlirazak@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-BRC/ST 5/3/602 : Experimental Studies On Cold And Warm Ceramic Powders Compaction Processes: Application To Malaysian Powder Metallurgy Industries Nor Hayati Saad : UKM/FKM Grant : S&T. MOE Year Start : Cost (RM) : : aidahjumahat@salam.uitm.edu.my 138

140 NORIAH BINTI YUSOFF Project No : 600-RMI/ST/DANA 5/3/Dst (256/2009) : The Characterisation Of Potential Solar Thermal In The Development Of Solar Oven In The Malaysia Climate Noriah Yusoff : oldtimermiller@gmail.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (30/2011) : A New Integrated Structure Model Of Staggered-Coupled Micro Resonant Sensor With Simplified Pattern Recognition EngineSystem Noriah Yusoff / / : norhayatisaad@salam.uitm.edu.my/ norhayatisaad@yahoo.co.uk Grant : FRGS (S&T). Year Start : Cost (RM) :

141 Project No : 600-RMI/ST/FRGS 5/3/Fst (38/2011) : Parametric Theory Investigation Of Green Tower Using Solar Oven As A Heat Collector Noriah Yusof : / / Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ERGS 5/3 (16/2011) : : New Micro-Machining Process Algorithm for 3-Demensional Precision Microelectro-Mechanical System (MEMS) Noriah Yusoff / Grant : ERGS. Year Start : Cost (RM) : : norhayatisaad@yahoo.co.uk / norhayatisaad@salam.uitm.edu.my 140

142 NURSALBIAH AHMAD Project No : 600-RMI/ST/DANA 5/3/Dst (143/2011) Head : Development Of Anthropometric Database Of Malaysian Youth : Nursalbiah Nasir : nursalbiah@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (229/2009) : Primary Stability Of Cemented Hip Arthroplasty: Effects Of Cement Mantle Thickness Nursalbiah Nasir Grant Year Start : Cost (RM) : : halim.fkm.uitm@gmail.com : DANA KECEMERLANGAN (S&T). 141

143 OW CHEE HEE TENG Project No : IRPA / 25 Head Member (s) Grant : Marine Growth Prevention : Ow Chee Sheng : : owche870@salam.uitm.edu.my : IRPA Year Start : Cost (RM) : Project No : IRPA / 45 : New Fuelling Strategies For Port - Injected Spark Ignition Engine Towards Improvement In Fuel Consumption And Exhaust Emission ( ) Ow Chee Sheng : owche870@salam.uitm.edu.my Grant : IRPA Year Start : Cost (RM) :

144 Project No : 100-BRC/IRPA 16/6/2 (3/2000) : Direct injection for gasoline engines towards the fuel economy and minimum pollution ( ) Ow Chee Sheng : Grant : IRPA Year Start : Cost (RM) : Project No : 600- IRDC/ ST/5/3/1074 : Experimental Determination Of The Effect Of Turbulent Intensity On Aerodynamic Characteristics Of Remotely Piloted Vehicle Member (s) : Ow Chee Sheng : Pulau Pinang (FKM) : zue_adik@hotmail.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 100-IRDC/SF 16/6/2 (4/2008) : A New Fuel Cell Powered Aerospace Propulsion System. Aw Hee Ow Chee Sheng / : DRTOMWARD@HOTMAIL.COM Grant : ESCIENCE. Year Start : Cost (RM) :

145 Project No : 600-RMI/ST/DANA 5/3/Dst (248/2009) : Studying Thermal Performance Of Split-type Air-conditioners At Building Re -entrant Via Computer Simulation Ow Chee Sheng : ziah_rai@yahoo.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (156/2010) : Numerical and Analytical Study of Compat Hydrogen PEM Fuel Cells Member (s) : Ow Chee Sheng / : wkuntjoro@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (40/2011) : Multiphase Transport Pulsation Parameters Measurement Of Bio- Fluid Member (s) : OW CHEE AW HEE TENG (DR) (DATUK) / / : mazwan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

146 Project No : 600-RMI/ERGS 5/3 (22/2011) : : Impedance Induced Circulatory Support on Effective Adjuvant Therapeutic LVAD Ow Chee Aw Hee Teng / : mazwan@salam.uitm.edu.my Grant : ERGS. Year Start : Cost (RM) :

147 RAHIM ATAN Project No Head : 600- IRDC/ ST/5/3/1073 : The Design And Development Of A Turbojet Combustion Chamber As Thrust Booster : Rahim Atan : nrosli75@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No Rahim Atan : : ST/109 : Aerothemodynamic Design and Performance Analysis of Gas Turbines: A study of Compressor Fouling Grant : S&T. MOE Year Start : Cost (RM) :

148 Project No : 600-BRC/ST 5/3/546 Head : : Optimum Combination Between Fix Air, Fuel Ratio and Variable Ignition Strength for Combustion in Spark Ignition Internal Combustion : Rahim Atan Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-BRC/ST 5/3/298 Head : : Development Of A Computer Program For Aerothermodynamic Design And Performance Analysis Of Gas Turbines:a Study Of Compressor Feuling : Rahim Atan Grant : S&T Year Start : Cost (RM) : 0.00 Project No : 100-BRC/IRPA 16/6/2 (3/2000) : Direct injection for gasoline engines towards the fuel economy and minimum pollution ( ) Rahim Atan : Grant : IRPA Year Start : Cost (RM) :

149 Project No : 600-RMI/ST/FRGS 5/3/Fst (76/2010) : New Technique in Micro Channel Geometry Optimization of An Air-Cooled Polymer Electrolyte Membrane Fuel Cell Bipolar Plate Rahim Atan : rahimatan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (45/2010) : Development and Testing of Air-Cooled Closes Cathode Polymer Electrolyte Membrane Fuel Cell-Stacks Rahim Atan : rahimatan@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (46/2010) : Polymer Electrolyte Membrane Fuel Cell Flow Field Design for Effective Water Removal Rahim Atan : rahimatan@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

150 Project No : 600-RMI/ST/DANA 5/3/Dst (477/2011) : Science Social & Mgmt (SSP) Head : Fuel Cell Power Plant Modeling And Development For Racing Vehicles : Rahim Atan / / : rahimatan@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : 2000 Project No : 600- IRDC/ ST/5/3/1073 : The Design And Development Of A Turbojet Combustion Chamber As Thrust Booster Rahim Atan : nrosli75@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (217/2009) : Laboratory Simulation on A Free Flowing River Water Powered Generation of 500w Rahim Atan : baljit@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

151 Project No : 600-RMI/ST/FRGS 5/3/Fst (125/2010) : New Configuration Of Meso-scale Hollow Cone Rocket Injectors For Improved Swirling Flow Characteristics Rahim Atan / : hussein@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (168/2010) : New Flow Field Configuration And Process Visualization Of A Polymer Electrolyte Membrane Fuel Cell Biopolar Plate In Effective Water Flooding Management Rahim Atan / / : hazran883@yahoo.co.uk Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (9/2011) : The Effect Of Reynolds Number Of The Junction Temperatures Of Plcc Packages Mounted On Printed Circuit Board (pcb) Using Simulation And Experi- ment Method Rahim Atan : Pulau / FKM / : mazlan547@ppinang.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

152 RAMLAN KASIRAN Project No : 600-RMI/ST/DANA 5/3/Dst (246/2009) Head : Study on Malaysian Driver's Brake Application Characteristics During Emergency Braking : Ramlan Kasiran : elan98@gmail.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (213/2009) : Investigation on The Phenomenon of Brake Fluid Degradation in Malaysian Environment Ramlan Kasiran : mshahriman@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

153 RAMLAN ZAILANI Project No : 600-RMI/ST/FRGS 5/3/Fst (89/2010) : Investigation Of Structural Features And Fuel Properties Of Bio-chars From Carbonization Of Biomass In Various Pyrolizing Environments And Gas Compositions Ramlan Zailani / : ramlanza@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 100-RMI/SF 16/6/2 (5/2009) : A Non-destructive Technique To Obtain The Tribological Aspects Of Journal Bearing Using Ultrasonic Reflection Measurement Ramlan Zailani / : salmiah99@hotmail.com Grant : ESCIENCE. Year Start : Cost (RM) :

154 Project No : 600-RMI/ST/FRGS 5/3/Fst (38/2011) : Parametric Theory Investigation Of Green Tower Using Solar Oven As A Heat Collector Ramlan Zailani : / / Grant : FRGS (S&T) Year Start : Cost (RM) :

155 RAMZYZAN RAMLY Project No : 600-IRDC/ST 5/3/731 : Stress Analysis Of A Bonded Repair On A Stiffened Panel (aircraft Stiffened Skin Structure) Ramzyzan Ramly : ramzyzan@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-IRDC/ ST 5/3/1049 : Performance Analysis Of A Frictionless Inertial Torque Device For Automative Transmission Ramzyzan Ramly : ramzyramly@yahoo.com, ramzyzan@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

156 RAZMI CHIK Project No Head : SSP/49 : Science Social & Mgmt (SSP) : Early Employment Outcome Of Home Versus Foreign Trained Graduates - A Malaysian Experience : Razmi Chik : Terengganu : razmichik@yahoo.co.uk Grant : SSP. MOE Year Start : Cost (RM) :

157 RIZAL EFFENDY MOHS NASIR Project No : 100-IRDC/SF 16/6/2(34/2007) : Development Of A Principal Approach For The Transverse Strength Of A Semi-swath Vessel Rizal Effendy Mohd Nasir / : syadmnov@salam.uitm.edu.my Grant : ESCIENCE Year Start : Cost (RM) : Project No : 600-IRDC/ST/FRGS.5/3/1177 : Aerodynamics Prediction Of Blended Wing Body (bwb) Of Unmanned Aerial Vehicle (uav) Using Wind Tunnel Experimental Approach * Rizal Effendy Mohd Nasir : wira_wisnoe@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) :

158 Project No : 600-IRDC/ ST 5/3/1025 : Aerodynamics Of Blended Wing Body (bwb) Unmanned Aerial Vehicle Using Computational Fluid Dynamics (cfd) Rizal Effendy Mohd Nasir : aman_korup@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (31/2008) : Design Parameters For The Development Of Wing Test Ring For Statictest Experiment Rizal Effendy Mohd Nasir : ramzyzan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (219/2009) : Longitudinal Flight Control Surfaces Of Blended Wing Body (bwb) Unmanned Aerial Vehicle Member (s) : Rizal Effendy Mohd Nasir : wkuntjoru@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

159 ROSELEENA JAAFAR Project No : 100-RMI/SF 16/6/2 (2/2009) : Process Optimization Of Stamping Die Using Response Surface Methodology Method Roseleena Jaafar / : aro@salam.itm.edu.my Grant : ESCIENCE. Year Start : Cost (RM) : Project No : 600-RMI/PRGS 5/3 (5/2011) : : Fabrication Of An Ergonomic Safety Shoe Insole:Design,Mould And Process Roseleena Jaafar / / : aro@salam.uitm.edu.my Grant : PRGS. Year Start : Cost (RM) :

160 ROSNADIAH BAHSAN Project No : 600-RMI/ST/ 5/3/Rst (13/2009) : : Development Of Superplastic Carburizing Using Duplex Stainless Steel Rosnadiah Bahsan : Grant : DAFTAR SAHAJA (S&T). Year Start : Cost (RM) : 0.00 Project No : 600-RMI/ST/FRGS 5/3/Fst (40/2011) : Multiphase Transport Pulsation Parameters Measurement Of Bio-Fluid Rosnadiah Bahsan / / : mazwan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

161 Project No : 600-RMI/ERGS 5/3 (22/2011) : : Impedance Induced Circulatory Support on Effective Adjuvant Therapeutic LVAD Rosnadiah Bahsan / : mazwan@salam.uitm.edu.my Grant : ERGS. Year Start : Cost (RM) :

162 SAHRIL KUSHAIRI Project No : 600-IRDC/ST 5/3/774 : Natural Frequency Analysis Of A Light Weight Box Structure Sahril Kushairi Member (s) : : sahril373@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-IRDC/ST/FRGS.5/3/1176 : The Dynamic Characterization Of Rotating Shaft With Cracks (single Or Multiple) * Sahril Kushairi : zulkiflee_ngah@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) :

163 Project No : 600-IRDC/ST/FRGS.5/3/1176 : The Dynamic Characterization Of Rotating Shaft With Cracks (single Or Multiple) * Sahril Kushairi : zulkiflee_ngah@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) :

164 SALMIAH KASOLANG Project No : 600-RMI/ST/DANA 5/3/Dst (206/2009) Head : Integrated Manufacturing Initiatives in Malaysia Automotive Industry : Salmiah Kasulang : salmiah99@hotmail.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (270/2009) : Tribological Investigation On Perodua Myvi 1300cc Gearbox Condition Through Automatic Transmission Fluid (atf) Analysis Salmiah Kasalung : salmiah99@hotmail.com Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) :

165 Project No : 600-RMI/ST/DANA 5/3/Dst (334/2009) : The Effect of Air Intake System Configuration on the Flow Behaviour through a Naturally Aspirated Internal Combustion Engine Intake Restrictor Salmiah Kasolang : zainalkb@yahoo.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (125/2010) : New Configuration Of Meso-scale Hollow Cone Rocket Injectors For Improved Swirling Flow Characteristics Salmiah Kasolang@Kasalung / : hussein@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ERGS 5/3 (54/2011) : : Swirl Atomization Under Effervescing Mode For Rapid Combustion In Meso-Scale Rocket Salmiah Kasolang@Kasalung / : hussein@salam.uitm.edu.my / hussein_14@yahoo.com Grant : ERGS Year Start : Cost (RM) :

166 Project No : 600-RMI/ST/FRGS 5/3/Fst (126/2010) : New Framework Model of Integrated Total Quality Management (TQM) and Lean Manufacturing (LM) for Malaysian Automotive Vendors Salmiah Kasalung / : salmiah99@hotmail.com Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 100-RMI/SF 16/6/2 (5/2009) : A Non-destructive Technique To Obtain The Tribological Aspects Of Journal Bearing Using Ultrasonic Reflection Measurement Salmiah Kasalung / : salmiah99@hotmail.com Grant : ESCIENCE. Year Start : Cost (RM) :

167 SHARUL AZAM ABDULLAH Project No : 600-RMI/ST/FRGS 5/3/Fst (154/2010) : Conductivity Behavior of Alumina Nanoparticles Incorporated Polymer Nanocomposites Prepared Via Melt Mixing Method Shahrul Azam Aziz / : shahrulazam@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 100-BRC/IRPA 16/6/2 (11/2003) : Determination Of Mechanical And Chemical Properties Of Brake Pads Of Light Rail Transit Application Shahrul Azam Abdullah : berhan@salam.uitm.edu.my Grant : IRPA Year Start : Cost (RM) :

168 Project No : 600-IRDC/ST 5/3/959 : Application Of Lamb Waves In Wear Detection On Aluminium Plate Shahrul Azam Abdullah : nrosli75@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600- IRDC/ ST/5/3/1062 : Mechanical Characterization Of Mgo And Zro2 Added Hydroxyapatite Bioceramics Shahrul Azam Abdullah : mimi azlina@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-BRC/ST 5/3/604 : Application Of Shot Peening Process To Improve Fatigue Life Of Automative Valves Shahrul Azam Abdullah : dr_dahlan@salam.uitm.edu.my Grant : S&T. MOE Year Start : Cost (RM) :

169 Project No : 600-RMI/ST/FRGS 5/3/Fst (155/2010) : Experemental Response Spectrum Investigation Of The Shock Characteristics Of Bio-based Foam Composites Shahrul Azam Abdullah / : davidfkm@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (207/2010) : Nano-polycrystalline Garnet-type Solid Electrolyte Li Ion Conductor Shahrul Azam Abdullah : RMI / FSSR : oskar@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (32/2011) : Computational Analysis On Thermal Stress In Diesel Particulate Filter During Soot Loading And Regeneration Shahrul Azam Ab Aziz / : nikrosli@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) :

170 SUHAIME SAPARI Project No : 100-BRC/IRPA 16/6/2 (3/2000) : Direct injection for gasoline engines towards the fuel economy and minimum pollution ( ) Suhaime Sapari : Grant : IRPA Year Start : Cost (RM) : Project No : 600-IRDC/ST 5/3/730 : Development Of Qpec (questionnaire Package For Engineering Curriculum) Ans Sas (statistical Analysis System) To Analyse The Survey [case Study : Market Survey For Curriculum Development Of Bachelor Engineering (hons) In Mechanical (manufacturing)] Suhaime Sapari /Pulau Pinang : zahurin8084@yahoo.com Grant : IS&T. NTERNAL GRANT Year Start : Cost (RM) :

171 Project No : 600-IRDC/ST 5/3/773 : Optimisation Of The Process Control In Thermoplastic Injection Moulding Using Design Of Experiment (doe) Method, Side Mirror Case Study Suhaime Sapari : juri41@yahoo.com, jurisaedon41@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-BRC/ST 5/3/301 : Aerodynamic Numeric Modelling Of A Semi Rigid Hang Glider / Ultralight Suhaime Sapari : Grant : S&T. MOE Year Start : Cost (RM) :

172 SUHAIME SUPARMAN Project No : 600-BRC/ST 5/3/499 : Linking And Matching Engineering Education With The Requirement Of Industry Suhaime Suparman : dr_dahlan@salam.uitm.edu.my Grant : S&T. MOE Year Start : Cost (RM) :

173 SUKARNUR CHE ABDULLAH Project No : 600-IRDC/ ST 5/3/1042 Head : Designing And Machining Cng/di Engine Piston Using Reverse Engineering Method : Sukarnur Che Abdullah : sukarnur@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-IRDC/ ST 5/3/1041 : Development Of The Pick And Place Robotics Chucking System Sukarnur Che Abdullah : ahmedjaffar@salam.uitm.edu.my, ahmedjaffar@yahoo.com : S&T. INTERNAL GRANT PROJEK INI DILULUSKAN DGN SYARAT M'DPT Grant PEMBIAYAAN PERBEZAAN GERAN YG DIPOHON DR OMRON Year Start : Cost (RM) :

174 SUNHAJI HAJI KIYAI ABAS Project No : 600-IRDC/ST/FRGS.5/3/1291 : To Study The Effect Of Dielectric On The Performance Of Electrical Discharge Machining (edm) * Sunhaji Kiyai Abas : norliana@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (211/2009) : Investigation on Carbon Dioxide Laser Cutting Parameters Optimisation of Incoloy 800 Member (s) : Sunhaji Kiyai Abas : yupiter.manurung@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

175 UMI KALSOM AHMAD Project No : 600-RMI/ST/FRGS 5/3/Fst (103/2010) : Jatropha-Palm Blends As Biodiesel Fuel For Internal Combustion Engine: A Development On Blending Process And Analysis Of Performance, Emissions and Lubricity Umi Kalsom Ahmad / : amierule@yahoo.com Grant : FRGS (S&T). Year Start : Cost (RM) :

176 Mohd Ridhwan Mohammed Reza Project No : 100-RMI/SF 16/6/2 (1/2010) Member (s) : Ergonomic Improvements In Air Handler Manufacturing For Air Conditioning Applications : Mohd Ridhwan Mohammed Redza /MMU / : jloohs@pd.jaring.my Grant : ESCIENCE. Year Start : Cost (RM) : Project No : 600-IRDC/ST/FRGS.5/3/1332 : Ergonomic Interventions In The Manufacturing Of Air Handlers For Air Mohd Ridhwan Mohammed Redza Grant : jloohs@pd.jaring.my : FRGS (S&T) Year Start : Cost (RM) :

177 VALLIYAPPAN DAVID A/L NATARAJAN Project No : 600-IRDC/ST 5/3/1009 : Beam Structure Made Of Oil Palm Fibre-epoxy Composite - Investigation Of Mechanical Properties Head : Valliyappan David Natarajan : davidfkm@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (155/2010) Head : Experemental Response Spectrum Investigation Of The Shock Characteristics Of Bio-based Foam Composites : Valliyappan David Natarajan / : davidfkm@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

178 Project No : 600-RMI/ERGS 5/3 (15/2011) : : Investigation of Binaural beats and Isochronis Tones on Brain Wave Frequency Patterns Valliyappan David Natarajan / : davidfkm@salam.uitm.edu.my / nv_david@yahoo.com Grant : ERGS. Year Start : Cost (RM) : Project No : 100-BRC/IRPA 16/6/2 (11/2003) : Determination Of Mechanical And Chemical Properties Of Brake Pads Of Light Rail Transit Application Valliyappan David Natarajah : berhan@salam.uitm.edu.my Grant : IRPA Year Start : Cost (RM) : Project No : 600-IRDC/ ST 5/3/1049 : Performance Analysis Of A Frictionless Inertial Torque Device For Automative Transmission Valliyappan David Natarajan : ramzyramly@yahoo.com, ramzyzan@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

179 Project No : 600-BRC/ST 5/3/512 : Development Of Motorcycle Suspension System Test Rig N. Valliyappan David : Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600- IRDC/ ST/5/3/1062 : Mechanical Characterization Of Mgo And Zro2 Added Hydroxyapatite Bioceramics Valliyappan David Natarajah : mimi azlina@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

180 WAHYU KUNTJORO Project No : 600-IRDC/ST 5/3/783 Head : Optimization of Truss Structure Based on Member Disposition : Wahyu Kuntjoro : wkuntjoro@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-BRC/ST 5/3/352 Head : : Structural Optimization Using Measurable Design Variables : Wahyu Kuntjoro Grant : S&T. MOE Year Start : Cost (RM) :

181 Project No : 600-BRC/ST 5/3/517 Head : Optimization Of Structural Configuration Using Mathematical Programming : Wahyu Kuntjoro Grant : S&T. MOE Year Start : Cost (RM) : : wkuntjoro@salam.uitm.edu.my Project No Head : 600-IRDC/ST/FRGS.5/3/1176 : The Dynamic Characterization Of Rotating Shaft With Cracks (single Or Multiple) * : Wahyu Kuntjoro : zulkiflee_ngah@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (104/2010) Head / Grant : Fatigue Load Parameters Measurement By Fiber Bragg Gratings Sensing Under Variable Amplitude Loading : Wahyu Kuntjoro : wkuntjoro@salam.uitm.edu.my : FRGS (S&T). Year Start : Cost (RM) :

182 Project No : 600-RMI/ST/FRGS 5/3/Fst (156/2010) Head : Numerical and Analytical Study of Compat Hydrogen PEM Fuel Cells : Wahyu Kuntjoro / : wkuntjoro@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (219/2009) : Longitudinal Flight Control Surfaces Of Blended Wing Body (bwb) Unmanned Aerial Vehicle Wahyu Kuntjuro : wkuntjoru@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (103/2010) : The Effect Of Canard Configurations To The Aerodynamics Of The Blended Wing Body Wahyu Kuntjoro : wkuntjoro@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) :

183 Project No : 600-IRDC/ST/FRGS.5/3/1177 : Aerodynamics Prediction Of Blended Wing Body (bwb) Of Unmanned Aerial Vehicle (uav) Using Wind Tunnel Experimental Approach * Wahyu Kuntjoro : wira_wisnoe@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : IRPA / 52 : Science Social & Mgmt (SSP) : Development of virtual laboratories for teaching of Mechanical Engineering subjects ( ) Wahyu Kuntjoro : Grant : IRPA Year Start : Cost (RM) : Project No : 100-IRDC/IRPA 16/6/2 (1/2004) : Development Of On-line Mechanical Engineering Design And Manufacturing Process Wahyu Kuntjoro : juri41@yahoo.com Grant : IRPA Year Start : Cost (RM) :

184 Project No : 600-IRDC/ST 5/3/731 : Stress Analysis Of A Bonded Repair On A Stiffened Panel (aircraft Stiffened Skin Structure) Wahyu Kuntjoro : ramzyzan@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-IRDC/ST 5/3/916 : Performance Analysis Of One Stage Solid Propellant Rocket Wahyu Kuntjoro : wan_mazlina@hitmail.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : 0.00 Project No : 600-BRC/ST 5/3/497 : Failure Analysis Of Fiber Reinforced Composite Materials Used In Malaysia Industries Wahyu Kuntjoro : jm@salam.uitm.edu.my Grant : S&T. MOE Year Start : Cost (RM) :

185 Project No : 600-BRC/ST 5/3/514 : Preliminary Micro Aerial Vehicle Wahyu Kuntjoro : nazarwahidi@yahoo.com Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-BRC/ST. 5/3/556 : Stress Analysis Of A Riveted Repair On A Stiffened Panel (aircraft Stiffened Skin Structure) Wahyu Kuntjoro : ramzyzan@salam.uitm.edu.my Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-IRDC/ST 5/3/1009 : Beam Structure Made Of Oil Palm Fibre-epoxy Composite - Investigation Of Mechanical Properties Wahyu Kuntjoro : davidfkm@salam.uitm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

186 Project No : 100-IRDC/SF 16/6/2 (4/2008) : A New Fuel Cell Powered Aerospace Propulsion System. Member (s) : Wahyu Kuntjoro / : DRTOMWARD@HOTMAIL.COM Grant : ESCIENCE. Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (31/2008) : Design Parameters For The Development Of Wing Test Ring For Statictest Experiment Wahyu Kuntjoro : ramzyzan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (97/2010) : Aerodynamic Design And Analysis Of Yaw Control Surfaces For Uitm Bwb Baseline-ii Uav Wahyu Kuntjoro : wira_wisnoe@yahoo.com Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) :

187 Project No : 600-RMI/ST/FRGS 5/3/Fst (249/2010) : Matrix Of Flow And Sediment With Fe And Cfd Simulations For The Formation Of Midland Point Bars Leading To Bifurcation In Sand Bed Channel Wahyu Kuntjoro : FKA / : junaidahariffin@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/SSP/DANA 5/3/Dsp (35/2011) : Science Social & Mgmt (SSP) : The Initial, Stable Or Maturity Sustainability Reporting Among Malaysian Listed Firms Sri Wahyu Sakina Ahmad Sanusi : Johor / FP / / : idasu634@johor.uitm.edu.my Grant : DANA KECEMERLANGAN (SSP). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (167/2011) : Behavioural of Stratified Material Under Hyrodynamic Force Wahyu Kuntjoro : FKA / : junaidah@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

188 Project No : 600-RMI/ST/DANA 5/3/Dst (471/2011) : Science Social & Mgmt (SSP) : Fracture Toughness And Impact Behaviour Of Rubber Toughened Epoxy Reinforced Kenaf Fibre/CNTs Hybrid Nanocomposites Wahyu Kuntjoro / / : mimi_azlina@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

189 WAN AHMAD NAJMI WAN MOHAMED Project No : 600-IRDC/ST 5/3/947 Head : Development Of Dual-mode Fixed Bed Combustion Chamber For Solid Waste Fuels : Wan Ahmad Najmi Wan Mohamed : wanjerm2@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-BRC/ST 5/3/546 : Optimum Combination Between Fix Air, Fuel Ratio and Variable Ignition Strength for Combustion in Spark Ignition Internal Combustion Wan Ahmad Najmi Wan Mohamed : Grant : S&T. MOE Year Start : Cost (RM) :

190 Project No : 600-BRC/ST 5/3/547 : Development Of A Machinery Component Cleaning Rig Using The Concept Of Heated Fluidized Bed Technology Wan Ahmad Najmi Wan Mohamed : Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (168/2010) : New Flow Field Configuration And Process Visualization Of A Polymer Electrolyte Membrane Fuel Cell Biopolar Plate In Effective Water Flooding Management Wan Ahmad Najmi Bin Wan Mohamed / / : hazran883@yahoo.co.uk Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (45/2010) : Development and Testing of Air-Cooled Closes Cathode Polymer Electrolyte Membrane Fuel Cell-Stacks Wan Ahmad Najmi Wan Mohamed : rahimatan@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

191 WAN EMRI WAN ABDUL RAHAMAN Project No : 600-RMI/ST/ 5/3/Rst (4/2009) : : Optimization Of Product Design For Assembly Technique Wan Emri Wan Abdul Rahman : emriwan@hotmail.com Grant : DAFTAR SAHAJA (S&T). Year Start : Cost (RM) : 0.00 Project No : 600-RMI/ST/ 5/3/Rst (17/2009) : Head : Study On Machining Skd 61 With Electrical Discharge Machining (edm) Using Taguchi Method : Wan Emri Wan Abdul Rahman : FKA : emriwan@hotmail.com Grant : DAFTAR SAHAJA (S&T). Year Start : Cost (RM) :

192 Project No : 100-RMI/SF 16/6/2 (2/2009) : Process Optimization Of Stamping Die Using Response Surface Methodology Wan Emri Wan Abdul Rahaman / : aro@salam.itm.edu.my Grant : ESCIENCE. Year Start : Cost (RM) :

193 WAN MAZLINA WAN MOHAMAD Project No : 600-IRDC/ST 5/3/861 Head : Design And Development Of Unmanned Aerial Vehicle For Crop Spaying. : Wan Mazlina Wan Mohamed : wan_mazlina@hotmail.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-IRDC/ST 5/3/916 Head : Performance Analysis Of One Stage Solid Propellant Rocket : Wan Mazlina Wan Mohamed : wan_mazlina@hitmail.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

194 Project No : 600-IRDC/ST 5/3/643 : The Application Of Unmanned Aerial Vehicle For Tnb High Tension Cable Inspection Wan Mazlina Wan Mohamed : wmazlina@salam.uitm.edu.my Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-IRDC/SSP 5/3/1522 : : The Effectiveness Of Board Monitoring In The Event Of Earnings Management Wan Mazlina Wan Mohamed : FP : shidah@salam.uitm.edu.my Grant : DAFTAR SAHAJA (SSP). PEMBIAYAAN SENDIRI Year Start : Cost (RM) : 0.00 Project No : 600-IRDC/ST 5/3/876 : Development Of Hybrid Drive Vehicle Wan Mazlina Wan Mohamed : FKE : dekan@amech.engr.itm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

195 WAN SULAIMAN WAN MOHAMMAD Project No : 600-RMI/ST/FRGS 5/3/Fst (38/2011) : Parametric Theory Investigation Of Green Tower Using Solar Oven As A Heat Collector Wan Sulaiman Wan Mohammad : / / Grant : FRGS (S&T) Year Start : Cost (RM) :

196 WIRACHMAN WISNOE Project No Head : 600-IRDC/ST/FRGS.5/3/1177 : Aerodynamics Prediction Of Blended Wing Body (bwb) Of Unmanned Aerial Vehicle (uav) Using Wind Tunnel Experimental Approach * : Wirachman Wisnoe : wira_wisnoe@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (97/2010) Head : Aerodynamic Design And Analysis Of Yaw Control Surfaces For Uitm Bwb Baseline-ii Uav : Wirachman Wisnoe : wira_wisnoe@yahoo.com Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) :

197 Project No : 600-RMI/ST/FRGS 5/3/Fst (31/2008) : Design Parameters For The Development Of Wing Test Ring For Statictest Experiment Wirachman Wisnoe : ramzyzan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (129/2008) : Aerodynamics Prediction Of Multi-purpose Uav Using Wind Tunnel Experimental Approach Wirachman Wisnoe : Pulau Pinang(FKM) : ghazirah039@ppinang.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (153/2009) : Aerodynamic Analysis Of Aerofioil Of A Low Wind Speed Wind Turbine By Using Cfd And Wind Tunnel Test Wirachman Wisnoe : mhafiz_noh@yahoo.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

198 Project No : 600-RMI/ST/DANA 5/3/Dst (219/2009) : Longitudinal Flight Control Surfaces Of Blended Wing Body (bwb) Unmanned Aerial Vehicle Wirachman Wisnoe : wkuntjoru@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (103/2010) : The Effect Of Canard Configurations To The Aerodynamics Of The Blended Wing Body Wirachman Wisnoe : wkuntjoro@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (35/2011) : Investigation Of Turbulent Flow Temperature Separation Mechanism Through Rangue-Hilsch Vortex Tube Wirachman Wisnoe / / : fairuz1299@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

199 Project No : 600-RMI/ST/FRGS 5/3/Fst (40/2011) : Multiphase Transport Pulsation Parameters Measurement Of Bio-Fluid Wirachman Wisnoe / / : mazwan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

200 YA KUB MD TAIB Project No : 600-BRC/ST 5/3/498 Head Member (s) Grant : Impact And Post Impact Behaviour Of Pp/glass Fibre/polymer Matrix Composite Material : Yakub Md Taib : /FKA : yakubtaib@yahoo.co.uk : S&T. MOE Year Start : Cost (RM) : Project No : 600-BRC/ST 5/3/511 Head Member (s) Grant Year Start Cost (RM) : Damage Analysis Of Fibre- Reinforced Concrete : Yakub Md Taib : /FKA/FSG : yakubtaib@yahoo.co.uk : S&T. MOE : :

201 Project No : 100-IRDC/SF 16/6/2(67/2007) Head Member (s) : Impact And Post Impact Properties Of Metal Fibre Composite Materials : Yakub Md Taib : /USM/IRDC / : yakubtaib@yahoo.co.uk Grant : ESCIENCE Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (167/2010) : New Properties Of Kenaf Fiber Composite Using Impact Approach Member (s) : Ya'kub Md Taib / : norfazli@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (471/2011) : Science Social & Mgmt (SSP) : Fracture Toughness And Impact Behaviour Of Rubber Toughened Epoxy Reinforced Kenaf Fibre/CNTs Hybrid Nanocomposites Yakub Md Taib / / : mimi_azlina@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

202 Project No : 600-RMI/ST/DANA 5/3/Dst (471/2011) : Science Social & Mgmt (SSP) : Fracture Toughness And Impact Behaviour Of Rubber Toughened Epoxy Reinforced Kenaf Fibre/CNTs Hybrid Nanocomposites Yakub Md Taib / / : mimi_azlina@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : 2000 Project No : 600-RMI/ST/DANA 5/3/Dst (471/2011) : Science Social & Mgmt (SSP) : Fracture Toughness And Impact Behaviour Of Rubber Toughened Epoxy Reinforced Kenaf Fibre/CNTs Hybrid Nanocomposites Yakub Md Taib / / : mimi_azlina@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : 2000 Project No : 600-RMI/ST/DANA 5/3/Dst (471/2011) : Science Social & Mgmt (SSP) : Fracture Toughness And Impact Behaviour Of Rubber Toughened Epoxy Reinforced Kenaf Fibre/CNTs Hybrid Nanocomposites Yakub Md Taib / / : mimi_azlina@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

203 Project No : 600-RMI/ST/DANA 5/3/Dst (471/2011) : Science Social & Mgmt (SSP) : Fracture Toughness And Impact Behaviour Of Rubber Toughened Epoxy Reinforced Kenaf Fibre/CNTs Hybrid Nanocomposites Yakub Md Taib / / : mimi_azlina@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : 2000 Project No : 600-RMI/ST/DANA 5/3/Dst (471/2011) : Science Social & Mgmt (SSP) : Fracture Toughness And Impact Behaviour Of Rubber Toughened Epoxy Reinforced Kenaf Fibre/CNTs Hybrid Nanocomposites Yakub Md Taib / / : mimi_azlina@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

204 YUPITER HARANGAN PRASADA MANURUNG Project No : 100-RMI/SF 16/6/2 (6/2010) Head : Achieving Robotic Welding Quality On Ship Panel Structure With Optimized Distortion And Minimal Defects Using Fea And Advanced Ndt : Yupiter Harangan Prasada Manurung /Shah Alam(NCUK/PP) / : yupiter.manurung@salam.uitm.edu.my Grant : ESCIENCE. Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (211/2009) Head : Investigation on Carbon Dioxide Laser Cutting Parameters Optimisation of Incoloy 800 : Yupiter Harangan Prasada Manurung : yupiter.manurung@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

205 ZAINAL ABIDIN KAMARUL BAHARIN Project No : 600-IRDC/ST 5/3/861 : Design And Development Of Unmanned Aerial Vehicle For Crop Spaying. Zainal Abidin Kamarul Baharin : wan_mazlina@hotmail.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-IRDC/ST 5/3/876 : Development Of Hybrid Drive Vehicle Zainal Abidin Kamarul Baharin : FKE : dekan@amech.engr.itm.edu.my Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

206 ZAINORR HAILMEE SOLIHIN Project No : 600-RMI/ST/FRGS 5/3/Fst (38/2011) Head : : Parametric Theory Investigation Of Green Tower Using Solar Oven As A Heat Collector : Zainoor Hailmee Solihin / / Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600-RMI/ST/DANA 5/3/Dst (256/2009) Head Member (s) Grant : The Characterisation Of Potential Solar Thermal In The Development Of Solar Oven In The Malaysia Climate : Zainoor Hailmee Solihin : : oldtimermiller@gmail.com : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

207 Project No : 600-RMI/ST/FRGS 5/3/Fst (125/2010) : New Configuration Of Meso-scale Hollow Cone Rocket Injectors For Improved Swirling Flow Characteristics Zainoor Hailmee Solihin / : hussein@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) :

208 ZAINUDDIN MOHAMAD Project No : 600-BRC/ST 5/3/309 Head : The Design Of A Prototype Biochamber For The Production Of Banana Tissue Culture Plantlets In A Controlled Environment : Zainuddin Mohamad /FKE Grant : S&T. MOE Year Start : Cost (RM) : : zainuddin1@salam.uitm.edu.my Project No : 600-BRC/ST 5/3/317 : Development Of Integrated Technology For Efficient And Value Production Of Banana Tissue Culture Zainuddin Mohamad : FKE/FKM Grant : S&T Year Start : Cost (RM) : 0.00 : nbuniyamin@salam.uitm.edu.my 207

209 ZAMRI ABDUL RAHMAN Project No : ST/63 : A Study Of Fatigue Behavior Of Local Pewter Alloys Zamri Abdul Rahman : : FKE Grant : S&T. MOE Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (32/2008) : Dynamics And Control Underactuated Systems With Applications In Robotics Zamri Abdul Rahman : ahmadazlan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

210 Project No : 600-RMI/ST/FRGS 5/3/Fst (78/2010) : A Study Of Damage Using Ambient Modal Response In 3d Structures Zamri Abdul Rahman : ahmadazlan@salam.uitm.edu.my Grant : FRGS (S&T). Year Start : Cost (RM) :

211 ZULKIFLI MOHAMED Project No : 600-RMI/ST/DANA 5/3/Dst (199/2009) : Frame Configuration Optimization Using Neural Network Zulkifli Mohamed : msuhairil@yahoo.com Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) : Project No : 600-RMI/ST/FRGS 5/3/Fst (123/2010) : New Approach using PD-active force control (PDAFC) of twin rotor Multi- Input Multi-Output System(TRMS) Zulkifli Mohamed / : msuhairil@yahoo.com Grant : FRGS (S&T). Year Start : Cost (RM) :

212 Project No : 600-RMI/ST/DANA 5/3/Dst (6/2009) : High Static Low Dynamic Stiffness (hslds) Mechanismm On Passive Car Suspension System Zulkifli Mohamed : moasri@salam.uitm.edu.my Grant : DANA KECEMERLANGAN (S&T). Year Start : Cost (RM) :

213 ZURAIDAH SALLEH Project No : 600-IRDC/ST 5/3/988 Head : Interfacial Toughness And Damage Behavior Of Carbon/glass Fibre Hybrid Composite : Zuraidah Salleh : a_kzue@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) : Project No : 600-IRDC/ ST 5/3/1026 Head : Notch Strength Reduction And Damage Analysis Of Textile Frp Composites : Zuraidah Salleh : a_kzue@yahoo.com Grant : S&T. INTERNAL GRANT Year Start : Cost (RM) :

214 Project No : 600-RMI/ST/FRGS 5/3/Fst (167/2010) : New Properties Of Kenaf Fiber Composite Using Impact Approach Zuraidah Salleh / : norfazli@salam.uitm.edu.my Grant : FRGS (S&T) Year Start : Cost (RM) : Project No : 600- IRDC/ ST/5/3/1263 : : Comparison Of Mechanical Properties For Plypropylene (pp) Laminated On Fiberglass/epoxy Resin And Aluminium Net/epoxy Resin Composites Zuraidah Salleh : a_kzue@yahoo.com Grant : DAFTAR SAHAJA (S&T). Sendiri Year Start : Cost (RM) : 0.00 Project No : 100-IRDC/SF 16/6/2(67/2007) : Impact And Post Impact Properties Of Metal Fibre Composite Materials Zuraidah Salleh /USM/IRDC / : yakubtaib@yahoo.co.uk Grant : ESCIENCE Year Start : Cost (RM) :

215 Project No : 600-RMI/ST/FRGS 5/3/Fst (177/2010) : Mechanism Study of The Corrosion Behaviour of Electrodeposited Nanocrystalline Colbalt and its Alloys Using Potentiodynamic Polarization Zuraidah Salleh / : hyie1105@yahoo.com Grant : FRGS (S&T) Year Start : Cost (RM) :

216 215 Notes

217 216

218

CURRICULUM VITAE. Institution of Mechanical Engineers (IMechE), Associate Member, 2015

CURRICULUM VITAE. Institution of Mechanical Engineers (IMechE), Associate Member, 2015 CURRICULUM VITAE PERSONAL DETAILS Name Designation Faculty Mohamad Ali Bin Ahmad Senior Lecturer Faculty of Mechanical Engineering Tel. No. (Office) 03-55436250 Tel. No. Mobile 012-3319244 E-mail Address

More information

Available online at ScienceDirect. Procedia Engineering 68 (2013 ) 70 76

Available online at   ScienceDirect. Procedia Engineering 68 (2013 ) 70 76 Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 68 (2013 ) 70 76 Malaysian International Tribology Conference 2013 (MITC2013) The Effects of Oil Supply Pressure at Different

More information

DEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM. B. Tech. AUTOMOBILE ENGINEERING. In Specialization with MOTORSPORT ENGINEERING

DEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM. B. Tech. AUTOMOBILE ENGINEERING. In Specialization with MOTORSPORT ENGINEERING DEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM (Applicable for Students admitted from Academic Year 2015-16) B. Tech. AUTOMOBILE ENGINEERING In Specialization with MOTORSPORT ENGINEERING SCHOOL OF MECHANICAL

More information

GUJARAT TECHNOLOGICAL UNIVERSITY

GUJARAT TECHNOLOGICAL UNIVERSITY GUJARAT TECHNOLOGICAL UNIVERSITY Draft Teaching Scheme : B.E. Course : (W.E.F.: 2016-2017) Aeronautical Engineering (01) Theory Marks utorial/ Practical Mark Total Branch Aircraft Design II 4 0 2 6 70

More information

Load Analysis and Multi Body Dynamics Analysis of Connecting Rod in Single Cylinder 4 Stroke Engine

Load Analysis and Multi Body Dynamics Analysis of Connecting Rod in Single Cylinder 4 Stroke Engine IJSRD - International Journal for Scientific Research & Development Vol. 3, Issue 08, 2015 ISSN (online): 2321-0613 Load Analysis and Multi Body Dynamics Analysis of Connecting Rod in Single Cylinder 4

More information

Friday Midterm EXAMINATION Fall 2018 CREDIT HOURS ENGINEERING PROGRAMS AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING

Friday Midterm EXAMINATION Fall 2018 CREDIT HOURS ENGINEERING PROGRAMS AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING HUM311 Engineering Management 176 HUMN362 Engineering Management 1 14:00 16:00 224, 261 CEP 011 Engineering Drawing (2) 247 14:00 16:00 901, 901A, 902A, 902B,904, 250 Friday 9-11-2018 PHM022 Waves, Electricity,

More information

Automobile Body, Chassis, Occupant and Pedestrian Safety, and Structures Track

Automobile Body, Chassis, Occupant and Pedestrian Safety, and Structures Track Automobile Body, Chassis, Occupant and Pedestrian Safety, and Structures Track These sessions are related to Body Engineering, Fire Safety, Human Factors, Noise and Vibration, Occupant Protection, Steering

More information

GUJARAT TECHNOLOGICAL UNIVERSITY BE 8th Semester Exam Scheme & Subject Code EVALUATION SCHEME

GUJARAT TECHNOLOGICAL UNIVERSITY BE 8th Semester Exam Scheme & Subject Code EVALUATION SCHEME GUJARAT TECHNOLOGICAL UNIVERSITY BE 8th Semester Scheme & EVALUATION SCHEME MAX MIN MAX MIN MAX MIN MAX MIN 20 8 10 4 70 23 X 50% of X 30 12 X 50% of X NOTE : X = of the Particular. (M) 20/8 and 10/4 scheme

More information

Finite Element Analysis on Thermal Effect of the Vehicle Engine

Finite Element Analysis on Thermal Effect of the Vehicle Engine Proceedings of MUCEET2009 Malaysian Technical Universities Conference on Engineering and Technology June 20~22, 2009, MS Garden, Kuantan, Pahang, Malaysia Finite Element Analysis on Thermal Effect of the

More information

KINEMATICAL SUSPENSION OPTIMIZATION USING DESIGN OF EXPERIMENT METHOD

KINEMATICAL SUSPENSION OPTIMIZATION USING DESIGN OF EXPERIMENT METHOD Jurnal Mekanikal June 2014, No 37, 16-25 KINEMATICAL SUSPENSION OPTIMIZATION USING DESIGN OF EXPERIMENT METHOD Mohd Awaluddin A Rahman and Afandi Dzakaria Faculty of Mechanical Engineering, Universiti

More information

Sciences for Maneuver Campaign

Sciences for Maneuver Campaign Mr. Eric Spero Sciences for Maneuver Campaign U.S. Army Research Laboratory Ground Air Sciences for Maneuver Campaign Science & Technology enabled air and ground platform capabilities to significantly

More information

Part II. HISTORICAL AND ENGINEERING ANALYSIS OF AIRSHIP PLAN-AND- DESIGN AND SERVICE DECISIONS

Part II. HISTORICAL AND ENGINEERING ANALYSIS OF AIRSHIP PLAN-AND- DESIGN AND SERVICE DECISIONS CONTENTS MONOGRAPHER S FOREWORD DEFENITIONS, SYMBOLS, ABBREVIATIONS, AND INDICES Part I. LAWS AND RULES OF AEROSTATIC FLIGHT PRINCIPLE Chapter 1. AIRCRAFT FLIGHT PRINCIPLE 1.1 Flight Principle Classification

More information

ENERGY AND PRODUCTS APPLIED STUDIES FOR ENGINEERS. PRO2 Present and Future fuels Materials. PRO4 Gas, industrial combustion and environment

ENERGY AND PRODUCTS APPLIED STUDIES FOR ENGINEERS. PRO2 Present and Future fuels Materials. PRO4 Gas, industrial combustion and environment ENERGY AND PRODUCTS APPLIED STUDIES FOR ENGINEERS Program PRO1 Refining processes PRO2 Present and Future fuels Materials PRO3 Fuels - logistics PRO4 Gas, industrial combustion and environment PRO5 Lubrication

More information

AEROSTAR SOLUTIONS. A Project Association AERONAUTICAL AND MECHANICAL PROJECTS FOR FINAL YEAR STUDENTS

AEROSTAR SOLUTIONS. A Project Association AERONAUTICAL AND MECHANICAL PROJECTS FOR FINAL YEAR STUDENTS AEROSTAR SOLUTIONS A Project Association AERONAUTICAL AND MECHANICAL PROJECTS FOR FINAL YEAR STUDENTS We had started our project center for the students who are seems too weak in subjects, lack of sources,

More information

using composites Blast protection of civil infrastructures and vehicles WOQDHEAD PUBLISHING LIMITED Edited by Nasim Uddin

using composites Blast protection of civil infrastructures and vehicles WOQDHEAD PUBLISHING LIMITED Edited by Nasim Uddin Blast protection of civil infrastructures and vehicles using composites Edited by Nasim Uddin CRC Press Boca Raton Boston New York Washington, DC WOQDHEAD PUBLISHING LIMITED Oxford Cambridge New Delhi

More information

THE FKFS 0D/1D-SIMULATION. Concepts studies, engineering services and consulting

THE FKFS 0D/1D-SIMULATION. Concepts studies, engineering services and consulting THE FKFS 0D/1D-SIMULATION Concepts studies, engineering services and consulting r e s e a r c h i n m o t i o n. VEHICLE IN MOTION On the basis of constant engine speeds and loads, the combustion engine

More information

Introduction of Voith Composites. Meet the Future of Carbon Fiber Composites. Germany, July voith.com. Garching, June 27, 2018

Introduction of Voith Composites. Meet the Future of Carbon Fiber Composites. Germany, July voith.com. Garching, June 27, 2018 voith.com Introduction of Voith Composites Germany, July 2018 Garching, June 27, 2018 Meet the Future of Carbon Fiber Composites Voith Composites Germany July 2018 1 Voith Group One of the Biggest Family

More information

Oil Palm Ripeness Detector (OPRID) and Non-Destructive Thermal Method of Palm Oil Quality Estimation

Oil Palm Ripeness Detector (OPRID) and Non-Destructive Thermal Method of Palm Oil Quality Estimation Oil Palm Ripeness Detector (OPRID) and Non-Destructive Thermal Method of Palm Oil Quality Estimation Abdul Rashid Mohamed Shariff, Shahrzad Zolfagharnassab, Alhadi Aiad H. Ben Dayaf, Goh Jia Quan, Adel

More information

Tests of the acoustic emission of the power steering column equipped with a modified composite worm gear housing

Tests of the acoustic emission of the power steering column equipped with a modified composite worm gear housing Tests of the acoustic emission of the power steering column equipped with a modified composite worm gear housing Marek Płaczek 1, Andrzej Wróbel 2, Mateusz Czechowski 3, Andrzej Baier 4 Silesian University

More information

EFFECTS OF CATALYTIC MUFFLER ON THE PERFORMANCE AND EMISSION OF TWO-STROKE MOTORCYCLE

EFFECTS OF CATALYTIC MUFFLER ON THE PERFORMANCE AND EMISSION OF TWO-STROKE MOTORCYCLE Prosiding Seminar Kebangsaan Aplikasi Sains dan Matematik 2010 (SKASM2010) sempena Simposium Kebangsaan Sains Matematik 2010 (SKSM2010) Johor Bahru, Johor, 8-10 Disember 2010 EFFECTS OF CATALYTIC MUFFLER

More information

Technology for Safe and Lightweight Automobiles

Technology for Safe and Lightweight Automobiles AUTOMOTIVE Plastics Application Technology for Safe and Lightweight Automobiles Sudhakar R. Marur Table of Contents Preface...xv Chapter 1 Introduction to Plastics Application Technology... 1 1.1 Introduction...1

More information

w w w. o n e r a. f r

w w w. o n e r a. f r www. onera. fr Pioneering concepts for Personal Air Transport Systems PPlane Project AMPERE Project Hybrid electrical propulsion study PPlane : a pioneering concept for Personal Air Transport Systems The

More information

UNCLASSIFIED FY 2017 OCO. FY 2017 Base

UNCLASSIFIED FY 2017 OCO. FY 2017 Base Exhibit R-2, RDT&E Budget Item Justification: PB 2017 Air Force Date: February 2016 3600: Research, Development, Test & Evaluation, Air Force / BA 2: Applied Research COST ($ in Millions) Prior Years FY

More information

FEA Based Vibration Characteristic Analysis of Conventional and Composite Material Single Piece Drive Shaft

FEA Based Vibration Characteristic Analysis of Conventional and Composite Material Single Piece Drive Shaft , July 5-7, 2017, London, U.K. FEA Based Vibration Characteristic Analysis of Conventional and Composite Material Single Piece Drive Shaft Ashwani Kumar, Neelesh Sharma, Pravin P Patil Abstract The main

More information

Crashworthiness of an Electric Prototype Vehicle Series

Crashworthiness of an Electric Prototype Vehicle Series Crashworthiness of an Electric Prototype Vehicle Series Schluckspecht Project Collaboration for Crashworthiness F. Huberth *, S. Sinz *+, S. Herb *+, J. Lienhard *+, M. Jung *, K. Thoma *, K. Hochberg

More information

Proposal to establish a laboratory for combustion studies

Proposal to establish a laboratory for combustion studies Proposal to establish a laboratory for combustion studies Jayr de Amorim Filho Brazilian Bioethanol Science and Technology Laboratory SCRE Single Cylinder Research Engine Laboratory OUTLINE Requirements,

More information

SUBJECT CODES FOR VARIOUS COURSES UNDER JNTU KAKINADA

SUBJECT CODES FOR VARIOUS COURSES UNDER JNTU KAKINADA SUBJECT CODES FOR VARIOUS COURSES UNDER JNTU KAKINADA COURSE BRANCH REG YEAR SEM SUBJECT TITLE CODE CODE B.Tech 01 R10 1 1 R10111 ENGLISH PROFICIENCY B.Tech 01 R10 1 1 R10108 ENGINEERING PHYSICS AND ENGINEERING

More information

Manufacturing Process I 10ME35 (Fundamentals of Foundry and Mechanical Computer Aided Machine 10ME36A/

Manufacturing Process I 10ME35 (Fundamentals of Foundry and Mechanical Computer Aided Machine 10ME36A/ III SEMESTER Teaching /week Sub-Code Title Dept. Pract. Duration I.A. / Total /Drg. 1 10MAT31 Engineering Mathematics - III Mathematics 04-03 25 100 125 2 Material Sc. & Metallurgy / 10ME32A/ Mechanical

More information

(Common to ME/IP/IM/AU/MA/AE)

(Common to ME/IP/IM/AU/MA/AE) Sl. III SEMESTER Sub- 1 10MAT31 Engineering Mathematics - III 2 Material Sc. & Metallurgy / 10ME32A/ 10ME32B Metrology 3 Basic 10ME33 Thermodynamics 4 Mechanics of 10ME34 Materials 5 Process I 10ME35 (Fundamentals

More information

THERMAL STRESS ANALYSIS OF HEAVY TRUCK BRAKE DISC ROTOR

THERMAL STRESS ANALYSIS OF HEAVY TRUCK BRAKE DISC ROTOR Thermal Stress Analysis of heavy Truck Brake Disc Rotor THERMAL STRESS ANALYSIS OF HEAVY TRUCK BRAKE DISC ROTOR M.Z. Akop 1, R. Kien 2, M.R. Mansor 3, M.A. Mohd Rosli 4 1, 2, 3, 4 Faculty of Mechanical

More information

Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor, Malaysia. Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor, Malaysia

Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor, Malaysia. Universiti Tun Hussein Onn Malaysia, Parit Raja, Johor, Malaysia Applied Mechanics and Materials Submitted: 2014-08-14 ISSN: 1662-7482, Vol. 660, pp 714-718 Revised: 2014-08-14 doi:10.4028/www.scientific.net/amm.660.714 Accepted: 2014-08-14 2014 Trans Tech Publications,

More information

STATIC STRUCTURAL ANALYSIS AND OPTIMIZATION OF BRAKE PEDAL

STATIC STRUCTURAL ANALYSIS AND OPTIMIZATION OF BRAKE PEDAL STATIC STRUCTURAL ANALYSIS AND OPTIMIZATION OF BRAKE PEDAL Miss. ASHWINI N.GAWANDE 1, Prof.G.E.KONDHALKAR 2, Prof. ASHISH R.PAWAR 3 1PG Student, Design Engineering, APCOE & R, Parvati, Pune 2HOD, Mechanical

More information

NZQA unit standard version 5 Page 1 of 6. Demonstrate knowledge of engine design factors and machining practices

NZQA unit standard version 5 Page 1 of 6. Demonstrate knowledge of engine design factors and machining practices Page 1 of 6 Title Demonstrate knowledge of engine design factors and machining practices Level 4 Credits 20 Purpose People credited with this unit standard are able to demonstrate knowledge of engine design

More information

Study of Vibrational Effects on Heavy Duty Truck Chassis with the Help of Model Analysis Using Fem Technique

Study of Vibrational Effects on Heavy Duty Truck Chassis with the Help of Model Analysis Using Fem Technique Study of Vibrational Effects on Heavy Duty Truck Chassis with the Help of Model Analysis Using Fem Technique Bhupendra E. Gajbhiye 1, Sachin V. Bhalerao 2, Kapil B. Salve 3 1,2,3: Jawaharlal Darda Institute

More information

GUJARAT TECHNOLOGICAL UNIVERSITY BE 7th Semester Exam Scheme & Subject Code EVALUATION SCHEME

GUJARAT TECHNOLOGICAL UNIVERSITY BE 7th Semester Exam Scheme & Subject Code EVALUATION SCHEME GUJARAT TECHNOLOGICAL UNIVERSITY BE 7th Semester Scheme & EVALUATION SCHEME MAX MIN MAX MIN MAX MIN MAX MIN 20 8 10 4 70 23 X 50% of X 30 12 X 50% of X NOTE : X = of the Particular. (M) 20/8 and 10/4 scheme

More information

AUTOMOTIVE TESTING AND OPTIMIZATION. Tools for designing tomorrow's vehicles

AUTOMOTIVE TESTING AND OPTIMIZATION. Tools for designing tomorrow's vehicles AUTOMOTIVE TESTING AND OPTIMIZATION Tools for designing tomorrow's vehicles 2 Measurement of flow around the side mirror by Particle Image Velocimetry (PIV). Courtesy of Visteon Deutschland GmbH Our advanced

More information

Ashwani Kumar 1, Shaik Imran Behmad 2, Pravin P Patil 3 1,2,3

Ashwani Kumar 1, Shaik Imran Behmad 2, Pravin P Patil 3 1,2,3 Thermo-Mechanical and Vibration Analysis of the I.C. Engine Piston made of SiC reinforced ZrB2 composite using Finite Element Method (ANSYS) Ashwani Kumar 1, Shaik Imran Behmad 2, Pravin P Patil 3 1,2,3

More information

Bosko Rasuo University of Belgrade, Faculty of Mechanical Engineering, Aeronautical Department, Belgrade 35, Serbia

Bosko Rasuo University of Belgrade, Faculty of Mechanical Engineering, Aeronautical Department, Belgrade 35, Serbia 27 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES AN EXPERIMENTAL TECHNIQUE FOR VERIFICATION FATIGUE CHARACTERISTICS OF LAMINATED FULL-SCALE TESTING OF THE HELICOPTER ROTOR BLADES Bosko Rasuo University

More information

DESIGN AND SIMULATION OF A CYLINDER HEAD STRUCTURE FOR A COMPRESSED NATURAL GAS DIRECT INJECTION ENGINE

DESIGN AND SIMULATION OF A CYLINDER HEAD STRUCTURE FOR A COMPRESSED NATURAL GAS DIRECT INJECTION ENGINE International Conference on Mechanical Engineering Research (ICMER2013), 1-3 July 2013 Bukit Gambang Resort City, Kuantan, Pahang, Malaysia Organized by Faculty of Mechanical Engineering, Universiti Malaysia

More information

The Graduate Diploma in Engineering is an AQF Level 8 qualification with a standard full-time duration of 1 year.

The Graduate Diploma in Engineering is an AQF Level 8 qualification with a standard full-time duration of 1 year. Graduate Diploma in Engineering (GDipE) 2015 These Program Rules should be read in conjunction with the University's policies (http://www.adelaide.edu.au/policies). Overview Graduate Diploma in Engineering

More information

STRUCTURAL DESIGN AND ANALYSIS OF ELLIPTIC CYCLOCOPTER ROTOR BLADES

STRUCTURAL DESIGN AND ANALYSIS OF ELLIPTIC CYCLOCOPTER ROTOR BLADES 16 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS STRUCTURAL DESIGN AND ANALYSIS OF ELLIPTIC CYCLOCOPTER ROTOR BLADES In Seong Hwang 1, Seung Yong Min 1, Choong Hee Lee 1, Yun Han Lee 1 and Seung Jo

More information

FRAUNHOFER INSTITUTE FOR CHEMICAL TECHNOLOGY ICT REDOX-FLOW BATTERY

FRAUNHOFER INSTITUTE FOR CHEMICAL TECHNOLOGY ICT REDOX-FLOW BATTERY FRAUNHOFER INSTITUTE FOR CHEMICAL TECHNOLOGY ICT REDOX-FLOW BATTERY REDOX-FLOW BATTERY REDOX-FLOW BATTERY Redox-flow batteries are efficient and have a longer service life than conventional batteries.

More information

Maritime Institute at NTU NTU) Status of Research

Maritime Institute at NTU NTU) Status of Research Maritime Institute at NTU (MI @ NTU) Status of Research presented by Lam Yen Chin Executive Director MI@NTU 3 June 2013 Nanyang Technological University (NTU) Established in 1991 Ranked 47 th in the world

More information

Conceptual Design of Cantilever Support for Long Haul Bus Passenger Seat

Conceptual Design of Cantilever Support for Long Haul Bus Passenger Seat Australian Journal of Basic and Applied Sciences, 7(9): 383-387, 2013 ISSN 1991-8178 Conceptual Design of Cantilever Support for Long Haul Bus Passenger Seat 1 Chee Fai Tan, 1 Z.Y. Tean, 2 B.L. Tan, 2

More information

Al-FALAH UNIVERSITY (University with NAAC A Grade Accredited Institutions) Faridabad (Haryana) Tel. No. (0129) ,

Al-FALAH UNIVERSITY (University with NAAC A Grade Accredited Institutions) Faridabad (Haryana) Tel. No. (0129) , Sr. No. Al-FALAH UNIVERSITY M. Tech Sem.-1 st (Re appear with CBCS Scheme/Old scheme) AFU, Dhauj, Faridabad. Date Course No Course Title Branches 1. 02.06.17 2. 06.06.17 3. 09.06.17 4. 13.06.17 MTCE 603

More information

DESIGN OF CUSTOMIZED MODULAR CYLINDER HEAD FOR SI-ENGINE

DESIGN OF CUSTOMIZED MODULAR CYLINDER HEAD FOR SI-ENGINE DESIGN OF CUSTOMIZED MODULAR CYLINDER HEAD FOR SI-ENGINE Athirah Abdul Aziz 1, Adlansyah Abd Rahman 2 and Abdul Aziz Hassan 3 1 College of Graduate Studies, Universiti Tenaga Nasional, Kajang, Selangor,

More information

EE5940: Wind Essen.als. Materials and Structural Reliability Sue Mantell Mechanical Engineering

EE5940: Wind Essen.als. Materials and Structural Reliability Sue Mantell Mechanical Engineering EE5940: Wind Essen.als Materials and Structural Reliability Sue Mantell Mechanical Engineering Focus on Rotor Blades Overview the most complex structural component of a wind turbine Quick overview of Loads

More information

CHAPTER 6 CONCLUSION

CHAPTER 6 CONCLUSION 108 CHAPTER 6 CONCLUSION This work investigates the energy conservation through efficiency improvement in an induction motor by Die-cast Copper Rotor (DCR) Technology. The possibility of the efficiency

More information

Port-Fuel Injection System for Small 4-Stroke Single Cylinder Engine: An Experimental Framework

Port-Fuel Injection System for Small 4-Stroke Single Cylinder Engine: An Experimental Framework Port-Fuel Injection System for Small 4-Stroke Single Cylinder Engine: An Experimental Framework Mohd Faisal Hushim 1,*, Ahmad Jais Alimin, Mohd Faizal Mohideen Batcha, Mas Fawzi Mohd Ali, Luqman Abdul

More information

Advance Your Company s Success in Technology Development & Commercialization PARTNER WITH ARGONNE NATIONAL LABORATORY

Advance Your Company s Success in Technology Development & Commercialization PARTNER WITH ARGONNE NATIONAL LABORATORY Advance Your Company s Success in Technology Development & Commercialization PARTNER WITH ARGONNE NATIONAL LABORATORY Leverage Argonne s expertise, technologies, and research facilities to improve your

More information

Vehicle Aerodynamics Subscription Development of Numerical Simulation Method of Flow Around Automobile Using Meshfree Method

Vehicle Aerodynamics Subscription Development of Numerical Simulation Method of Flow Around Automobile Using Meshfree Method Vehicle Aerodynamics Subscription 2005-01-0544 Development of Numerical Simulation Method of Flow Around Automobile Using Meshfree Method 2005-01-0545 A Downforce Optimization Study for a Racing Car Shape

More information

Pre-normative research on resistance to mechanical impact of composite overwrapped pressure vessels. Dr. Fabien Nony CEA

Pre-normative research on resistance to mechanical impact of composite overwrapped pressure vessels. Dr. Fabien Nony CEA Pre-normative research on resistance to mechanical impact of composite overwrapped pressure vessels Dr. Fabien Nony CEA http://hypactor.eu/ Email Coordinator: fabien.nony@cea.fr Programme Review Days 2017

More information

Vibration Analysis of Hybrid Composite Leaf Spring

Vibration Analysis of Hybrid Composite Leaf Spring Vibration Analysis of Hybrid Composite Leaf Spring S.B. Jadhav 1, Prof. A.V. Karande 2 1 DGOI, FOE, Bhigvan, Pune, Maharashtra India, 2 Prof., DGOI, FOE, Bhigvan, Pune, Maharashtra India ABSTRACT This

More information

Influence of Cylinder Bore Volume on Pressure Pulsations in a Hermetic Reciprocating Compressor

Influence of Cylinder Bore Volume on Pressure Pulsations in a Hermetic Reciprocating Compressor Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2014 Influence of Cylinder Bore Volume on Pressure Pulsations in a Hermetic Reciprocating

More information

Structural Analysis of Pick-Up Truck Chassis using Fem

Structural Analysis of Pick-Up Truck Chassis using Fem International Journal of ChemTech Research CODEN (USA): IJCRGG, ISSN: 0974-4290, ISSN(Online):2455-9555 Vol.9, No.06 pp 384-391, 2016 Structural Analysis of Pick-Up Truck Chassis using Fem Rahul.V 1 *,

More information

Training Courses Information

Training Courses Information Training Courses Information Health & Condition Monitoring Center Sustainable Manufacturing Systems Laboratory Iran University of Science & Technology Condition Monitoring, Maintenance & Reliability (Overview)

More information

MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL. (09 January 2016)

MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL. (09 January 2016) MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL (09 January 2016) Sl. No. Table ME- 1 B.Tech. (Mechanical Engineering) - 2015 Batch onwards Code COURSE

More information

Appendix A.1 Calculations of Engine Exhaust Gas Composition...9

Appendix A.1 Calculations of Engine Exhaust Gas Composition...9 Foreword...xi Acknowledgments...xiii Introduction... xv Chapter 1 Engine Emissions...1 1.1 Characteristics of Engine Exhaust Gas...1 1.1.1 Major Components of Engine Exhaust Gas...1 1.1.2 Units Used for

More information

Photoelectric Sensor Based Intelligent Track Racing Car

Photoelectric Sensor Based Intelligent Track Racing Car Available online at www.sciencedirect.com Procedia Engineering 41 (2012 ) 588 592 International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012) Photoelectric Sensor Based Intelligent Track

More information

Gas exchange and fuel-air mixing simulations in a turbocharged gasoline engine with high compression ratio and VVA system

Gas exchange and fuel-air mixing simulations in a turbocharged gasoline engine with high compression ratio and VVA system Third Two-Day Meeting on Internal Combustion Engine Simulations Using the OpenFOAM technology, Milan 22 nd -23 rd February 2018. Gas exchange and fuel-air mixing simulations in a turbocharged gasoline

More information

Research on the Structure of Linear Oscillation Motor and the Corresponding Applications on Piston Type Refrigeration Compressor

Research on the Structure of Linear Oscillation Motor and the Corresponding Applications on Piston Type Refrigeration Compressor International Conference on Informatization in Education, Management and Business (IEMB 2015) Research on the Structure of Linear Oscillation Motor and the Corresponding Applications on Piston Type Refrigeration

More information

DEVELOPMENT OF VIBRATION CONDITION MONITORING SYSTEM APPLYING OPTICAL SENSORS FOR GENERATOR WINDING INTEGRITY OF POWER UTILITIES

DEVELOPMENT OF VIBRATION CONDITION MONITORING SYSTEM APPLYING OPTICAL SENSORS FOR GENERATOR WINDING INTEGRITY OF POWER UTILITIES Advanced Materials Development and Performance (AMDP2011) International Journal of Modern Physics: Conference Series Vol. 6 (2012) 98-103 World Scientific Publishing Company DOI: 10.1142/S2010194512003005

More information

EXPERIMENT AND ANALYSIS OF MOTORCYCLE EXHAUST DESIGN ABDUL MUIZ BIN JAAFAR

EXPERIMENT AND ANALYSIS OF MOTORCYCLE EXHAUST DESIGN ABDUL MUIZ BIN JAAFAR EXPERIMENT AND ANALYSIS OF MOTORCYCLE EXHAUST DESIGN ABDUL MUIZ BIN JAAFAR Report submitted in partial fulfilment of the requirement for the award of the degree of Bachelor of Mechanical Engineering with

More information

Design and Impact Analysis on front Bumper beam Crash box for a sedan car using glass fiber reinforced polymer

Design and Impact Analysis on front Bumper beam Crash box for a sedan car using glass fiber reinforced polymer International Journal of Computational Science, Mathematics and Engineering Volume-3-Issue-11-November-2016 ISSN-2349-8439 Design and Impact Analysis on front Bumper beam Crash box for a sedan car using

More information

Modelling of Manhattan K-Nearest Neighbor for Exhaust Emission Analysis of CNG-Diesel Engine

Modelling of Manhattan K-Nearest Neighbor for Exhaust Emission Analysis of CNG-Diesel Engine Journal of Applied Fluid Mechanics, Vol. 11, Special Issue, pp. 39-44, 2018. Selected papers from International Conference on Newer Techniques and Innovations in Mechanical Engineering (ICONTIME 2K18),

More information

A SOLAR POWERED UAV. 1 Introduction. 2 Requirements specification

A SOLAR POWERED UAV. 1 Introduction. 2 Requirements specification A SOLAR POWERED UAV Students: R. al Amrani, R.T.J.P.A. Cloosen, R.A.J.M. van den Eijnde, D. Jong, A.W.S. Kaas, B.T.A. Klaver, M. Klein Heerenbrink, L. van Midden, P.P. Vet, C.J. Voesenek Project tutor:

More information

Mazda RX-8 Rotary Hydrogen Engine

Mazda RX-8 Rotary Hydrogen Engine 1 Mazda RX-8 Rotary Hydrogen Engine For A Cleaner Environment Mazda is committed to developing combustion technologies with a minimum of impact on the environment. At this year s Geneva Motor Show, Mazda

More information

7. PRELIMINARY DESIGN OF A SINGLE AISLE MEDIUM RANGE AIRCRAFT

7. PRELIMINARY DESIGN OF A SINGLE AISLE MEDIUM RANGE AIRCRAFT 7. PRELIMINARY DESIGN OF A SINGLE AISLE MEDIUM RANGE AIRCRAFT Students: R.M. Bosma, T. Desmet, I.D. Dountchev, S. Halim, M. Janssen, A.G. Nammensma, M.F.A.L.M. Rommens, P.J.W. Saat, G. van der Wolf Project

More information

Modal Analysis of Automobile Brake Drum Based on ANSYS Workbench Dan Yang1, 2,Zhen Yu1, 2, Leilei Zhang1, a * and Wentao Cheng2

Modal Analysis of Automobile Brake Drum Based on ANSYS Workbench Dan Yang1, 2,Zhen Yu1, 2, Leilei Zhang1, a * and Wentao Cheng2 7th International Conference on Mechatronics, Computer and Education Informationization (MCEI 2017) Modal Analysis of Automobile Brake Drum Based on ANSYS Workbench Dan Yang1, 2,Zhen Yu1, 2, Leilei Zhang1,

More information

Crankcase scavenging.

Crankcase scavenging. Software for engine simulation and optimization www.diesel-rk.bmstu.ru The full cycle thermodynamic engine simulation software DIESEL-RK is designed for simulating and optimizing working processes of two-

More information

Comparing FEM Transfer Matrix Simulated Compressor Plenum Pressure Pulsations to Measured Pressure Pulsations and to CFD Results

Comparing FEM Transfer Matrix Simulated Compressor Plenum Pressure Pulsations to Measured Pressure Pulsations and to CFD Results Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2012 Comparing FEM Transfer Matrix Simulated Compressor Plenum Pressure Pulsations to Measured

More information

Study on waste heat recovery from exhaust gas spark ignition (S.I.) engine using steam turbine mechanism

Study on waste heat recovery from exhaust gas spark ignition (S.I.) engine using steam turbine mechanism Study on waste heat recovery from exhaust gas spark ignition (S.I.) engine using steam turbine mechanism Kamarulhelmy Talib 1,*, Safarudin G. Herawan 1,2, Musthafah M. Tahir 1,2, Azma Putra 1,2, and Shamsul

More information

Semi-Active Suspension for an Automobile

Semi-Active Suspension for an Automobile Semi-Active Suspension for an Automobile Pavan Kumar.G 1 Mechanical Engineering PESIT Bangalore, India M. Sambasiva Rao 2 Mechanical Engineering PESIT Bangalore, India Abstract Handling characteristics

More information

COOPERATIVE PATENT CLASSIFICATION

COOPERATIVE PATENT CLASSIFICATION CPC - Y02T - 2014.07 - Interleaved - page 1 CPC COOPERATIVE PATENT CLASSIFICATION Y02T CLIMATE CHANGE MITIGATION TECHNOLOGIES RELATED TO TRANSPORTATION WARNING - Subclass Y02T and its groups are not complete

More information

Primary control surface design for BWB aircraft

Primary control surface design for BWB aircraft Primary control surface design for BWB aircraft 4 th Symposium on Collaboration in Aircraft Design 2014 Dr. ir. Mark Voskuijl, ir. Stephen M. Waters, ir. Crispijn Huijts Challenge Multiple redundant control

More information

A POWER GENERATION STUDY BASED ON OPERATING PARAMETERS OF THE LINEAR ENGINE USING A POWERPACK

A POWER GENERATION STUDY BASED ON OPERATING PARAMETERS OF THE LINEAR ENGINE USING A POWERPACK HEFAT214 1 th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 14 16 July 214 Orlando, Florida A POWER GENERATION STUDY BASED ON OPERATING PARAMETERS OF THE LINEAR ENGINE USING

More information

Influence of Fuel Injector Position of Port-fuel Injection Retrofit-kit to the Performances of Small Gasoline Engine

Influence of Fuel Injector Position of Port-fuel Injection Retrofit-kit to the Performances of Small Gasoline Engine Influence of Fuel Injector Position of Port-fuel Injection Retrofit-kit to the Performances of Small Gasoline Engine M. F. Hushim a,*, A. J. Alimin a, L. A. Rashid a and M. F. Chamari a a Automotive Research

More information

THE LONGITUDINAL VIBRATION OF COMPOSITE DRIVE SHAFT

THE LONGITUDINAL VIBRATION OF COMPOSITE DRIVE SHAFT THE LONGITUDINAL VIBRATION OF COMPOSITE DRIVE SHAFT Tongtong Zhang, Yongsheng Li, Weibo Wang National Key Laboratory on Ship Vibration and Noise, China Ship Scientific Research Centre, Wuxi, China email:

More information

students (mostly MS level, partially BS and PhD) academic staff

students (mostly MS level, partially BS and PhD) academic staff The (established 1707) and the Mechanical Engineering Faculty of the CTU 8 faculties - Civil Eng, MechEng, ElEng, Informatics, NucEng, TranspEng, BioMedEng and Architecture/Styling 21 000 students (mostly

More information

A Micro Power Generation System with Gas Turbine Engine and Piezo Converter -- Modeling, Fabrication and Characterization --

A Micro Power Generation System with Gas Turbine Engine and Piezo Converter -- Modeling, Fabrication and Characterization -- A Micro Power Generation System with Gas Turbine Engine and Piezo Converter -- Modeling, Fabrication and Characterization -- X.C. Shan *1, Z.F. Wang 1, Y.F. Jin 1, C.K. Wong 1, J. Hua 2, M. Wu 2, F. Lu

More information

Journal of Advanced Mechanical Design, Systems, and Manufacturing

Journal of Advanced Mechanical Design, Systems, and Manufacturing Pneumatic Valve Operated by Multiplex Pneumatic Transmission * Yasutaka NISHIOKA **, Koichi SUZUMORI **, Takefumi KANDA ** and Shuichi WAKIMOTO ** **Department of Natural Science and Technology, Okayama

More information

DESIGN AND SIMULATION OF A CYLINDER HEAD STRUCTURE FOR A COMPRESSED NATURAL GAS DIRECT INJECTION ENGINE

DESIGN AND SIMULATION OF A CYLINDER HEAD STRUCTURE FOR A COMPRESSED NATURAL GAS DIRECT INJECTION ENGINE International Journal of Automotive and Mechanical Engineering (IJAME) ISSN: 9-8649 (Print); ISSN: 180-1606 (Online); Volume 9, pp. 160-169, January-June 014 Universiti Malaysia Pahang DOI: http://dx.doi.org/10.158/ijame.9.013.1.0134

More information

Manufacturing Quality Control of High-Pressure Composite Cylinders by Acoustic Emission

Manufacturing Quality Control of High-Pressure Composite Cylinders by Acoustic Emission ECNDT Berlin, September 25-29, 2006 Manufacturing Quality Control of High-Pressure Composite Cylinders by Acoustic Emission J. Bohse, G.W. Mair, S. Anders BAM Berlin (Germany) 1 Content 1. Composite cylinders

More information

EXPERIMENTAL STUDY ON EFFECTIVENESS OF SHEAR STRENGTHENING OF RC BEAMS WITH CFRP SHEETS

EXPERIMENTAL STUDY ON EFFECTIVENESS OF SHEAR STRENGTHENING OF RC BEAMS WITH CFRP SHEETS EXPERIMENTAL STUDY ON EFFECTIVENESS OF SHEAR STRENGTHENING OF RC BEAMS WITH CFRP SHEETS Yasuhiro Koda and Ichiro Iwaki Dept. of Civil Eng., College of Eng., Nihon University, Japan Abstract This research

More information

AEROSTAR SOLUTIONS OUR MOTTO

AEROSTAR SOLUTIONS OUR MOTTO AEROSTAR SOLUTIONS AERONAUTICAL, MECHANICAL AND AUTOMOBILE PROJECTS FOR FINAL YEAR STUDENTS Aerostar solutions is one of the pioneer project centre which has been started by industrial professionals to

More information

Radha Krisha (Pos. Doc.), M. A. Awal, Siyuan Chen, Hao Tu, Likhita Ravuri

Radha Krisha (Pos. Doc.), M. A. Awal, Siyuan Chen, Hao Tu, Likhita Ravuri Y9.GEH1.1 Multi-SST Medium Voltage Testbed Project Leader: Faculty: Students: Staff: Dr. Wensong Yu Dr. Iqbal Husain, Dr. Srdjan Lukic Radha Krisha (Pos. Doc.), M. A. Awal, Siyuan Chen, Hao Tu, Likhita

More information

FAILURE ANALYSIS AND EVALUATION OF A COMPOSITE MATERIAL AUTOMOTIVE DRIVESHAFT BY USING FEM A REVIEW

FAILURE ANALYSIS AND EVALUATION OF A COMPOSITE MATERIAL AUTOMOTIVE DRIVESHAFT BY USING FEM A REVIEW Int. J. Mech. Eng. & Rob. Res. 2014 Amol B Rindhe and S R Wagh, 2014 Research Paper ISSN 2278 0149 www.ijmerr.com Vol. 3, No. 2, April 2014 2014 IJMERR. All Rights Reserved FAILURE ANALYSIS AND EVALUATION

More information

Liquid Filtration Experience and Capabilities

Liquid Filtration Experience and Capabilities Liquid Filtration Experience and Capabilities Donaldson understands the need for new and unique liquid filtration technologies and solutions. We have a global infrastructure and technical expertise to

More information

CAE Services and Software BENTELER Engineering.

CAE Services and Software BENTELER Engineering. CAE Services and Software BENTELER Engineering BENTELER Engineering offers development services in market segments such as Automotive, Public Transportation, Commercial Vehicles, Shipbuilding and Industry.

More information

Asia Pacific Research Initiative for Sustainable Energy Systems 2011 (APRISES11)

Asia Pacific Research Initiative for Sustainable Energy Systems 2011 (APRISES11) Asia Pacific Research Initiative for Sustainable Energy Systems 2011 (APRISES11) Office of Naval Research Grant Award Number N0014-12-1-0496 Hydrogen Energy System Simulation Model for Grid Management

More information

A STUDY ON DIESEL ENGINE PERFORMANCE DEPENDS ON BP AND BSFC BY APPLYING DIFFERENT INJECTION PRESSURE

A STUDY ON DIESEL ENGINE PERFORMANCE DEPENDS ON BP AND BSFC BY APPLYING DIFFERENT INJECTION PRESSURE International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 11, November 2018, pp. 599 603, Article ID: IJMET_09_11_059 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=9&itype=11

More information

SRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING

SRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING SRIRAM ENGINEERING COLLEGE DEPARTMENT OF AUTOMOBILE ENGINEERING Name & Photo Dr. B. RAJENDRA PRASATH Designation Professor & Head Qualification UG(Specialization) Mechanical Engineering PG(Specialization)

More information

POSIBILITIES TO IMPROVED HOMOGENEOUS CHARGE IN INTERNAL COMBUSTION ENGINES, USING C.F.D. PROGRAM

POSIBILITIES TO IMPROVED HOMOGENEOUS CHARGE IN INTERNAL COMBUSTION ENGINES, USING C.F.D. PROGRAM POSIBILITIES TO IMPROVED HOMOGENEOUS CHARGE IN INTERNAL COMBUSTION ENGINES, USING C.F.D. PROGRAM Alexandru-Bogdan Muntean *, Anghel,Chiru, Ruxandra-Cristina (Dica) Stanescu, Cristian Soimaru Transilvania

More information

DESIGN AND OPTIMIZATION OF HTV FUEL TANK ASSEMBLY BY FINITE ELEMENT ANALYSIS

DESIGN AND OPTIMIZATION OF HTV FUEL TANK ASSEMBLY BY FINITE ELEMENT ANALYSIS DESIGN AND OPTIMIZATION OF HTV FUEL TANK ASSEMBLY BY FINITE ELEMENT ANALYSIS GAJENDRA G 1, PRAKASHA A M 2, DR NOOR AHMED R 3, DR.K.S.BADRINARAYAN 4 1PG Scholar, Mechanical department, M S Engineering College,

More information

Hybrid Vehicles. Electric and. Design Fundamentals. Iqbal Husain SECOND EDITION. Taylor & Francis Group, an informa business

Hybrid Vehicles. Electric and. Design Fundamentals. Iqbal Husain SECOND EDITION. Taylor & Francis Group, an informa business Electric and Hybrid Vehicles Design Fundamentals SECOND EDITION Iqbal Husain CRC Press is an imprint of the Taylor & Francis Group, an informa business 2.6.1.1 Contents Preface Acknowledgments Author xv

More information

Noise Reduction in a Reciprocating Compressor by Optimizing the Suction Muffler

Noise Reduction in a Reciprocating Compressor by Optimizing the Suction Muffler Noise Reduction in a Reciprocating Compressor by Optimizing the Suction Muffler Katakama Nagarjuna ¹ K.Sreenivas² ¹ M.tech student, ²Professor, dept of mechanical engineering kits, markapur, A.P, INDIA

More information

Highly dynamic control of a test bench for highspeed train pantographs

Highly dynamic control of a test bench for highspeed train pantographs PAGE 26 CUSTOMERS Highly dynamic control of a test bench for highspeed train pantographs Keeping Contact at 300 km/h Electric rail vehicles must never lose contact with the power supply, not even at the

More information

Experimental and Computational Investigation Of Brake Disc Using Composite Materials (FGM).

Experimental and Computational Investigation Of Brake Disc Using Composite Materials (FGM). Experimental and Computational Investigation Of Brake Disc Using Composite Materials (FGM). Guid Name Prof. S.S.Yadav Akshay J. Ekunde*1, Shreeja Yadav*2 Kaivalya Arve*3 Ajay Jogdand*4 UG Student & Associate

More information

Proceedings of the World Congress on Engineering 2008 Vol II WCE 2008, July 2-4, 2008, London, U.K.

Proceedings of the World Congress on Engineering 2008 Vol II WCE 2008, July 2-4, 2008, London, U.K. Development and Optimization of Vibration Protection Seats (Tempered Springs) for Agricultural Tractor Ch.Sreedhar 1, Assoc. Professor; Dr. K.C.B. Raju 2, Dy.G.M.BHEL; Dr. K. Narayana Rao 3, AICTE; Abstract:

More information

Design And Analysis Of Two Wheeler Front Wheel Under Critical Load Conditions

Design And Analysis Of Two Wheeler Front Wheel Under Critical Load Conditions Design And Analysis Of Two Wheeler Front Wheel Under Critical Load Conditions Tejas Mulay 1, Harish Sonawane 1, Prof. P. Baskar 2 1 M. Tech. (Automotive Engineering) students, SMBS, VIT University, Vellore,

More information