MetaBright RoboLight MB-RBL

Transcription

1 Metabright TM Robolights provide high intensity direct illumination comparable to Metabright TM Front Lights and are designed for IP68 rated environments. Robolights feature rugged industrial housings for industrial work envelopes. The Robolight is a cost effective and integrator ready machine vision illuminator with an integrated constant current driver. FEATURES APPLICATIONS Built-in Constant Driver with 0-10VDC Machine Vision and Automation Work bench illumination Passive cooling (no fans needed) Automotive component inspection Rugged housings for industrial work envelopes Coiled steel pin-hole detection o IP68 Black Anodized Aluminum Pick and Place applications o IP68 Stainless Steel Harsh environments Compatible with DDC-3 and ILD L Sorting facilities Stainless Steel version meets Food and Drug Robotic inspection Administration (FDA) requirements Liquid filling IP69K version available WAVELENGTHS GENERAL SPECIFICATIONS Order ID Description / nanometers W White (6000K), Nominal Power Source: 24VDC ±5% R Red / 630nm (Standard): 10-foot cable with flying leads G Green / 530nm Housing: Black Anodized Aluminum B Blue / 470nm Ambient Temp: -20 C to 40 C IR850 (or IRN) Infrared / 850nm Lifetime Expectancy: 75,000 hours (except UV) IR880 (or IRL) Infrared / 880nm IR940 Infrared / 940nm UV365 (or UVS) Ultraviolet Short / 365nm UV395 (or UVL) Ultraviolet Long / 395nm RGB Red-Green-Blue RGBIR Red-Green-Blue-IRXXX 1

2 SINGLE COLOR ROBOLIGHTS All models: Overall W=2.5", Active area W=1.5" Typical Overall inches (cm) Active Area Inches (cm) lbs/kg lbs/kg WHT RED GRN BLUE IR UVL UVS (17.08) 5.73 (14.54) 1.2 / / (20.32) 7.00 (17.78) 1.4 / / AWG (31.75) (29.21) 2.2 / / Wire (40.64) (38.10) 2.8 / / ft (45.72) (43.18) 3.2 / / (60.96) (58.42) 4.2 / / (76.20) (73.66) 5.3 / / (91.44) (88.90) 6.5 / / (106.68) (104.14) 7.6 / / (121.92) (119.80) 8.7 / / Wire (137.16) (134.62) 10.0 / / (152.40) (149.96) 11.1 / / (167.64) (165.10) 12.3 / / (182.88) (180.34) 13.5 / / *Custom sizes and configurations are available Aluminum Stainless Steel WIRING DIAGRAM (4 conductor) Wire Color Function Wire Color Function Pin # RED +24VDC RED, ORANGE +24VDC 1 GREEN SIGNAL GROUND GREEN SIGNAL GROUND 2 BLACK GROUND (24V RTN) BLACK, BLUE GROUND (24V RTN) 3 WHITE 0-10VDC Intensity Control WHITE WIRING DIAGRAM (6 conductor) 0-10VDC Intensity Control 4 5 M12 (5 position male) Function +24VDC 0-10VDC GROUND (24V RTN) SIGNAL GROUND No Connection When not using the, connect the 0-10V control line to the +24VDC and connect the Signal Ground to Ground (24V RTN) The M12 connector option is not recommended for lights rated more than 4 amps Note: The 0-10VDC input can accept voltages from 0-24VDC where the light will operate at full intensity in the 10-24VDC range. The light is proportionally dimmer for any voltage less than 10VDC and the light is OFF at approximately 0V or not connected (floating). 2

3 SINGLE COLOR ROBOLIGHTS with ULC-2 Controller All models: Overall W=2.5", Active area / Overall inches (cm) Active Area Inches (cm) lbs/kg lbs/kg WHT RED GRN BLUE IR UVL UVS (17.08) 5.73 (14.54) 1.2 / / (20.32) 7.00 (17.78) 1.4 / / (31.75) (29.21) 2.2 / / (40.64) (38.10) 2.8 / / (45.72) (43.18) 3.2 / / (60.96) (58.42) 4.2 / / (76.20) (73.66) 5.3 / / (91.44) (88.90) 6.5 / / (106.68) (104.14) 7.6 / / (121.92) (119.80) 8.7 / / (137.16) (134.62) 10.0 / / (152.40) (149.96) 11.1 / / (167.64) (165.10) 12.3 / / Wire 10ft 2.3 / / / / (182.88) (180.34) 13.5 / / / 30 *Custom sizes and configurations are available Aluminum Stainless Steel 0.9 / / / / 18 SINGLE COLOR LIGHT with ULC-2 (4 conductor) RED, WHITE (+) WIRE COLOR BLACK, GREEN (-) FUNCTION LED INPUT Terminated within a 2 position ULC-2 output connector (Phoenix Contact P/N: BCP-508-2) 3

4 RGB ROBOLIGHTS RGBIR ROBOLIGHTS Wire (Amps) AWG 10-Wire (Amps) WIRE COLOR FUNCTION WIRE COLOR FUNCTION ORANGE +24VDC WHITE +24VDC BLACK GND (24V RTN) WHT/BLK WHITE SIG GND BLACK GND (24V RTN) 0-10V RED RED/BLK RED GREEN/BLK SIGNAL GND ORG/BLK GREEN BLUE RGB (6 Conductor) 0-10V GREEN 0-10V BLUE When not using the Intensity Control, connect the 0-10V control line(s) to +24VDC and connect SIG GND to GND (24V RTN) RED GREEN BLUE ORANGE RGBIR (10 Conductor) 0-10V RED 0-10V GREEN 0-10V BLUE 0-10V INFRARED When not using the Intensity Control, connect the 0-10V control line(s) to +24VDC and connect SIG GND to GND (24V RTN) 4

5 RGB ROBOLIGHTS with ULC-2 Controller Wire / Strobe 1.6 / / / / / 27 RGBIR ROBOLIGHTS with ULC-2 Controller AWG 10-Wire / Strobe 1.6 / / / / / / / 30 RGB with ULC-2 (6 Conductor) RGBIR with ULC-2 (10 Conductor) WIRE COLOR FUNCTION WIRE COLOR FUNCTION RED (+) LED INPUT RED (+) LED INPUT BLACK (-) RED RED/BLK (-) RED GREEN (+) LED INPUT GREEN (+) LED INPUT WHITE (-) GREEN GRN/BLK(-) GREEN BLUE (+) LED INPUT BLUE (+) LED INPUT ORANGE (-) BLUE BLACK (-) BLUE Terminated within a 2 position ULC-2 output connector (Phoenix Contact P/N: BCP-508-2) ORANGE (+) ORG/BLK (-) WHITE (+) LED INPUT IR NO WHT/BLK (-) CONNECTION Terminated within a 2 position ULC-2 output connector (Phoenix Contact P/N: BCP-508-2) 5

6 NUMBER KEY LENGTH - COLOR/WAVELENGTH - OPTION 1 - OPTION 2 - DIFFUSER XXXX - XXXXX - XXX - XXX-XXX - X " W (White 6000K, Nominal) 24 (+24VDC) (standard) N - Narrow, " R (Red 630nm) L - Exolight Diffuser " G (Green 530nm) T (M12 quick diconnect) W - Wide, " B (Blue 470nm) FTRG (300kHz Fast Trigger) " IR850 (or IRN) (Infrared 850nm) " IR880 (or IRL) (Infrared 880nm) U (ULC-2 interface) " IR940 (Infrared 940nm) KEY (Keyance Controller) P (Polarizer, availble for all " UV365 (or UVS) (UV Short 365nm) ILD (In Line Dimmer) configurations) " UV395 (or UVL) (UV Long 395nm) ILS (In Line Strobe) " RGB (Red-Green-Blue) SS (Stainless Steel Housing) " RGBIR (Red-Green-Blue-IR850) XXX Customizable per order " " " Contact Metaphase Technologies or your local representative for options such as custom diffusers, lenses, polarizers, IP-rated enclosures for harsh environments, higher intensity, custom wavelengths, higher uniformity, etc. Not all options are available for all lights. 6

7 Sample Model Number: 385-W-24 COMPLIANCE CONTACT US Contact Metaphase Technologies at or your local representative for additional details, options and customizations. 7