General Purpose - TEFC Motors GP10 / RGZP (Cast Iron Frame)
|
|
- Eunice Reed
- 5 years ago
- Views:
Transcription
1 - TEFC Motors The GP10 and RGZP motors are ideal for both indoor and outdoor applications and in operating atmospheres that contain moisture, dust and grit. These industry workhorses are ideal for use in material handling, pump, fan, compressor and other general purpose applications. Performance Specifications 1 to 20 HP GP10 25 to 200 HP RGZP 1.15 service factor, 40ºC ambient 3600, 1800, 1200 or 900 RPM 3-phase, 60 Hz; /460 and 575 volt operation GP10 3-phase, 60 Hz; 230/460 volt operation under 100 HP, 460 volt 100 HP and above, 575 volt available - RGZP Meets or exceeds EPAct efficiency standards Class F insulation, Class B temperature rise NEMA design B, continuous duty 143T through 256T frame GP10 284T through 449T frame RGZP Features for Long Life Frame & End Shields Cast iron construction for exceptional structural integrity & corrosion resistance equipped with integrally cast feet and condensation drain holes (143T-256T frames) or condensation T-drains (284T-449T frames). Lifting eyebolts are included with motors > 75 lbs. Rotor A unique offset rotor bar design provides improved efficiency. Large cross section bars and end rings reduce resistance for lower rotor losses. Each die cast aluminum rotor assembly is dynamically balanced for extended bearing life, and includes a highstrength carbon steel (C1045) shaft for maximum rotor performance. Specifications table begins on the next page Stator/Windings Manufactured with premium electrical-grade steel laminations and copper electrical magnet wire to lower losses for improved efficiencies. A unique stator core design lowers flux density while increasing cooling capacity. Large conductor cross-section reduces resistance and lowers stator losses. Insulation Proprietary inverter-rated Class F non-hygroscopic insulation system with NEMA Class B temperature 1.0SF provides an extra margin of thermal life. Varnish system application ensures maximum wire penetration to provide protection from moisture, corrosion and electrical shock. This insulation system meets or exceeds NEMA MG1-2006, Part 31 (GP10) and Part 30 (RGZP) making all motors suitable for operation with variable frequency drives. Cooling A bi-directional, non-sparking fan is locked and keyed to the shaft. Its low-inertia design reduces windage losses, improves air flow, reduces noise and provides dependable cooling. Polycarbonate fan covers are provided on 143T-365T frames and cast iron for frames 404T and larger. Bearings Oversized, lubricated for life (143T-256T frames). Regreasable, oversized single shielded (284T-449T frames) with cast iron inner caps (444T 449T frames). Alemite grease fittings on the inlets and pipe plugs on the relief ports (284T 449T frames) for ease of routine maintenance. For added bearing protection, motors are equipped with a drive end shaft V-ring slinger. Lubrication A specially formulated, high temperature tested, polyurea based grease is used to provide more than four times the lubrication life of other polyurea greases. Oversized Conduit Box Larger than industry standards, diagonally-split, gasketed and rotatable in 90 increments for quick and easy connections. Leads are non-wicking and are clearly and permanently marked. Aluminum construction for frames 143T to 256T, steel for frames 284T to 405T and cast iron for 444T frames and larger. Corrosion Resistance Cast iron construction, zinc-plated hardware, epoxy enamel paint and aluminum nameplate resist rust and corrosion. Modifiable Siemens motors are available with a wide variety of modifications to meet your specific motor needs. 2-9
2 - TEFC Motors DE List Multiplier Nom. Weight Stock Horizontal, Foot Mounted T /460 GP10 Ball 1LE22011AA114AA3 300 GP T 575 GP10 Ball 1LE22011AA113AA3 300 GP T /460 GP10 Ball 1LE22011AB214AA3 300 GP T 575 GP10 Ball 1LE22011AB213AA3 300 GP T /460 GP10 Ball 1LE22011AC314AA3 374 GP T 575 GP10 Ball 1LE22011AC313AA3 374 GP T /460 GP10 Ball 1LE22011CD114AA3 585 GP T 575 GP10 Ball 1LE22011CD113AA3 585 GP T /460 GP10 Ball 1LE22011AA214AA3 308 GP T 575 GP10 Ball 1LE22011AA213AA3 308 GP T /460 GP10 Ball 1LE22011AB314AA3 331 GP T 575 GP10 Ball 1LE22011AB313AA3 331 GP T /460 GP10 Ball 1LE22011CC114AA3 399 GP T 575 GP10 Ball 1LE22011CC113AA3 399 GP T /460 GP10 Ball 1LE22011CD314AA3 634 GP T 575 GP10 Ball 1LE22011CD313AA3 634 GP T /460 GP10 Ball 1LE22011AA314AA3 358 GP T 575 GP10 Ball 1LE22011AA313AA3 358 GP T /460 GP10 Ball 1LE22011AB414AA3 359 GP T 575 GP10 Ball 1LE22011AB413AA3 359 GP T /460 GP10 Ball 1LE22011CC314AA3 441 GP T 575 GP10 Ball 1LE22011CC313AA3 441 GP T /460 GP10 Ball 1LE22012AD114AA3 730 GP T 575 GP10 Ball 1LE22012AD113AA3 730 GP T /460 GP10 Ball 1LE22011CA114AA3 399 GP T 575 GP10 Ball 1LE22011CA113AA3 399 GP T /460 GP10 Ball 1LE22011CB114AA3 413 GP T 575 GP10 Ball 1LE22011CB113AA3 413 GP T /460 GP10 Ball 1LE22012AC114AA3 567 GP T 575 GP10 Ball 1LE22012AC113AA3 567 GP T /460 GP10 Ball 1LE22012AD214AA GP T 575 GP10 Ball 1LE22012AD213AA GP T /460 GP10 Ball 1LE22011CA314AA3 520 GP T 575 GP10 Ball 1LE22011CA313AA3 520 GP T /460 GP10 Ball 1LE22011CB314AA3 470 GP T 575 GP10 Ball 1LE22011CB313AA3 470 GP T /460 GP10 Ball 1LE22012AC214AA3 845 GP T 575 GP10 Ball 1LE22012AC213AA3 845 GP T /460 GP10 Ball 1LE22012BD114AA GP T 575 GP10 Ball 1LE22012BD113AA GP T /460 GP10 Ball 1LE22012AA114AA3 679 GP T 575 GP10 Ball 1LE22012AA113AA3 679 GP T /460 GP10 Ball 1LE22012AB114AA3 658 GP T 575 GP10 Ball 1LE22012AB113AA3 658 GP T /460 GP10 Ball 1LE22012BC114AA GP T 575 GP10 Ball 1LE22012BC113AA GP T /460 GP10 Ball 1LE22012BD214AA GP T 575 GP10 Ball 1LE22012BD213AA GP
3 - TEFC Motors DE List Multiplier Nom. Weight Stock Horizontal, Foot Mounted - continued T /460 GP10 Ball 1LE22012AA214AA3 801 GP T 575 GP10 Ball 1LE22012AA213AA3 801 GP T /460 GP10 Ball 1LE22012AB214AA3 801 GP T 575 GP10 Ball 1LE22012AB213AA3 801 GP T /460 GP10 Ball 1LE22012BC214AA GP T 575 GP10 Ball 1LE22012BC213AA GP T /460 GP10 Ball 1LE22012BA114AA GP T 575 GP10 Ball 1LE22012BA113AA GP T /460 GP10 Ball 1LE22012BB114AA GP T 575 GP10 Ball 1LE22012BB113AA GP T 230/460 RGZP Ball 1LE29312CC116AA SA-7ST T 575 RGZP Ball 1LE29312CC113AA SA-7ST T /460 GP10 Ball 1LE22012BA214AA GP T 575 GP10 Ball 1LE22012BA213AA GP T /460 GP10 Ball 1LE22012BB214AA GP T 575 GP10 Ball 1LE22012BB213AA GP T 230/460 RGZP Ball 1LE29312CC216AA SA-7ST T 575 RGZP Ball 1LE29312CC213AA SA-7ST TS 230/460 RGZP Ball 1LE29312DA116AA SA-7ST TS 575 RGZP Ball 1LE29312DA113AA SA-7ST T 230/460 RGZP Ball 1LE29312CB116AA SA-7ST T 575 RGZP Ball 1LE29312CB113AA SA-7ST T 230/460 RGZP Ball 1LE29313AC116AA SA-7ST T 575 RGZP Ball 1LE29313AC113AA SA-7ST TS 230/460 RGZP Ball 1LE29312DA216AA SA-7ST TS 575 RGZP Ball 1LE29312DA213AA SA-7ST T 230/460 RGZP Ball 1LE29312CB216AA SA-7ST T 575 RGZP Ball 1LE29312CB213AA SA-7ST T 230/460 RGZP Ball 1LE29313AC216AA SA-7ST T 575 RGZP Ball 1LE29313AC213AA SA-7ST TS 230/460 RGZP Ball 1LE29313BA116AA SA-7ST TS 575 RGZP Ball 1LE29313BA113AA SA-7ST T 230/460 RGZP Ball 1LE29313AB116AA SA-7ST T 575 RGZP Ball 1LE29313AB113AA SA-7ST T 230/460 RGZP Ball 1LE29313CC116AA SA-7ST T 575 RGZP Ball 1LE29313CC113AA SA-7ST TS 230/460 RGZP Ball 1LE29313BA216AA SA-7ST TS 575 RGZP Ball 1LE29313BA213AA SA-7ST T 230/460 RGZP Ball 1LE29313AB216AA SA-7ST T 575 RGZP Ball 1LE29313AB213AA SA-7ST T 230/460 RGZP Ball 1LE29313CC216AA SA-7ST T 575 RGZP Ball 1LE29313CC213AA SA-7ST TS 230/460 RGZP Ball 1LE29313DA116AA SA-7ST TS 575 RGZP Ball 1LE29313DA113AA SA-7ST T 230/460 RGZP Ball 1LE29313CB116AA SA-7ST T 575 RGZP Ball 1LE29313CB113AA SA-7ST T 230/460 RGZP Ball 1LE29314AC116AA SA-7ST T 575 RGZP Ball 1LE29314AC113AA SA-7ST
4 - TEFC Motors DE List Multiplier Nom. Weight Stock Horizontal, Foot Mounted - continued TS 230/460 RGZP Ball 1LE29313DA216AA SA-7ST TS 575 RGZP Ball 1LE29313DA213AA SA-7ST T 230/460 RGZP Ball 1LE29313CB216AA SA-7ST T 575 RGZP Ball 1LE29313CB213AA SA-7ST T 230/460 RGZP Ball 1LE29314AC216AA SA-7ST T 575 RGZP Ball 1LE29314AC213AA SA-7ST TS 460 RGZP Ball 1LE29314BA212AA SA-7ST TS 575 RGZP Ball 1LE29314BA213AA SA-7ST T 460 RGZP Ball 1LE29314AB212AA SA-7ST TS 460 RGZP Ball 1LE29314BB212AA SA-7ST T 575 RGZP Ball 1LE29314AB213AA SA-7ST T 460 RGZP Roller 1LE29314CC112AA SA-7ST TS 460 RGZP Ball 1LE29314DC112AA SA-7ST T 575 RGZP Roller 1LE29314CC113AA SA-7ST TS 460 RGZP Ball 1LE29314DA112AA SA-7ST TS 575 RGZP Ball 1LE29314DA113AA SA-7ST T 460 RGZP Roller 1LE29314CB112AA SA-7ST B444T 460 RGZP Ball 1LE29314EB112AA SA-7ST TS 460 RGZP Ball 1LE29314DB112AA SA-7ST T 575 RGZP Roller 1LE29314CB113AA SA-7ST T 460 RGZP Roller 1LE29314CC212AA SA-7ST TS 460 RGZP Ball 1LE29314DC212AA SA-7ST T 575 RGZP Roller 1LE29314CC213AA SA-7ST TS 460 RGZP Ball 1LE29314DA212AA SA-7ST TS 575 RGZP Ball 1LE29314DA213AA SA-7ST T 460 RGZP Roller 1LE29314CB212AA SA-7ST B445T 460 RGZP Ball 1LE29314EB212AA SA-7ST TS 460 RGZP Ball 1LE29314DB212AA SA-7ST T 575 RGZP Roller 1LE29314CB213AA SA-7ST T 460 RGZP Roller 1LE29314CC312AA SA-7ST TS 460 RGZP Ball 1LE29314DC312AA SA-7ST T 575 RGZP Roller 1LE29314CC313AA SA-7ST TS 460 RGZP Ball 1LE29314DA312AA SA-7ST TS 575 RGZP Ball 1LE29314DA313AA SA-7ST T 460 RGZP Roller 1LE29314CB312AA SA-7ST TS 460 RGZP Ball 1LE29314DB312AA SA-7ST T 575 RGZP Roller 1LE29314CB313AA SA-7ST T 460 RGZP Roller 1LE29314CC512AA SA-7ST TS 460 RGZP Ball 1LE29314DC512AA SA-7ST T 575 RGZP Roller 1LE29314CC513AA SA-7ST
5 - TEFC Motors DE List Multiplier Nom. Weight Stock C-Face, Horizontal, Foot Mounted TC /460 GP10 Ball 1LE22011AA114EA3 353 GP TC 575 GP10 Ball 1LE22011AA113EA3 353 GP TC /460 GP10 Ball 1LE22011AB214EA3 353 GP TC 575 GP10 Ball 1LE22011AB213EA3 353 GP TC /460 GP10 Ball 1LE22011AC314EA3 427 GP TC 575 GP10 Ball 1LE22011AC313EA3 427 GP TC /460 GP10 Ball 1LE22011CD114EA3 661 GP TC 575 GP10 Ball 1LE22011CD113EA3 661 GP TC /460 GP10 Ball 1LE22011AA214EA3 361 GP TC 575 GP10 Ball 1LE22011AA213EA3 361 GP TC /460 GP10 Ball 1LE22011AB314EA3 384 GP TC 575 GP10 Ball 1LE22011AB313EA3 384 GP TC /460 GP10 Ball 1LE22011CC114EA3 475 GP TC 575 GP10 Ball 1LE22011CC113EA3 475 GP TC /460 GP10 Ball 1LE22011CD314EA3 710 GP TC 575 GP10 Ball 1LE22011CD313EA3 710 GP TC /460 GP10 Ball 1LE22011AA314EA3 411 GP TC 575 GP10 Ball 1LE22011AA313EA3 411 GP TC /460 GP10 Ball 1LE22011AB414EA3 412 GP TC 575 GP10 Ball 1LE22011AB413EA3 412 GP TC /460 GP10 Ball 1LE22011CC314EA3 517 GP TC 575 GP10 Ball 1LE22011CC313EA3 517 GP TC /460 GP10 Ball 1LE22012AD114EA3 806 GP TC 575 GP10 Ball 1LE22012AD113EA3 806 GP TC /460 GP10 Ball 1LE22011CA114EA3 475 GP TC 575 GP10 Ball 1LE22011CA113EA3 475 GP TC /460 GP10 Ball 1LE22011CB114EA3 489 GP TC 575 GP10 Ball 1LE22011CB113EA3 489 GP TC /460 GP10 Ball 1LE22012AC114EA3 643 GP TC 575 GP10 Ball 1LE22012AC113EA3 643 GP TC /460 GP10 Ball 1LE22012AD214EA GP TC 575 GP10 Ball 1LE22012AD213EA GP TC /460 GP10 Ball 1LE22011CA314EA3 596 GP TC 575 GP10 Ball 1LE22011CA313EA3 596 GP TC /460 GP10 Ball 1LE22011CB314EA3 546 GP TC 575 GP10 Ball 1LE22011CB313EA3 546 GP TC /460 GP10 Ball 1LE22012AC214EA3 921 GP TC 575 GP10 Ball 1LE22012AC213EA3 921 GP TC /460 GP10 Ball 1LE22012BD114EA GP TC 575 GP10 Ball 1LE22012BD113EA GP TC /460 GP10 Ball 1LE22012AA114EA3 755 GP TC 575 GP10 Ball 1LE22012AA113EA3 755 GP TC /460 GP10 Ball 1LE22012AB114EA3 734 GP TC 575 GP10 Ball 1LE22012AB113EA3 734 GP TC /460 GP10 Ball 1LE22012BC114EA GP TC 575 GP10 Ball 1LE22012BC113EA GP TC /460 GP10 Ball 1LE22012BD214EA GP TC 575 GP10 Ball 1LE22012BD213EA GP
6 - TEFC Motors DE List Multiplier Nom. Weight Stock C-Face, Horizontal, Foot Mounted - continued TC /460 GP10 Ball 1LE22012AA214EA3 877 GP TC 575 GP10 Ball 1LE22012AA213EA3 877 GP TC /460 GP10 Ball 1LE22012AB214EA3 877 GP TC 575 GP10 Ball 1LE22012AB213EA3 877 GP TC /460 GP10 Ball 1LE22012BC214EA GP TC 575 GP10 Ball 1LE22012BC213EA GP TC /460 GP10 Ball 1LE22012BA114EA GP TC 575 GP10 Ball 1LE22012BA113EA GP TC /460 GP10 Ball 1LE22012BB114EA GP TC 575 GP10 Ball 1LE22012BB113EA GP TC /460 GP10 Ball 1LE22012BA214EA GP TC 575 GP10 Ball 1LE22012BA213EA GP TC /460 GP10 Ball 1LE22012BB214EA GP TC 575 GP10 Ball 1LE22012BB213EA GP C-Face, Horizontal, Footless TC /460 GP10 Ball 1LE22011AA114GA3 367 GP TC 575 GP10 Ball 1LE22011AA113GA3 367 GP TC /460 GP10 Ball 1LE22011AB214GA3 367 GP TC 575 GP10 Ball 1LE22011AB213GA3 367 GP TC /460 GP10 Ball 1LE22011AC314GA3 441 GP TC 575 GP10 Ball 1LE22011AC313GA3 441 GP TC /460 GP10 Ball 1LE22011CD114GA3 684 GP TC 575 GP10 Ball 1LE22011CD113GA3 684 GP TC /460 GP10 Ball 1LE22011AA214GA3 375 GP TC 575 GP10 Ball 1LE22011AA213GA3 375 GP TC /460 GP10 Ball 1LE22011AB314GA3 398 GP TC 575 GP10 Ball 1LE22011AB313GA3 398 GP TC /460 GP10 Ball 1LE22011CC114GA3 498 GP TC 575 GP10 Ball 1LE22011CC113GA3 498 GP TC /460 GP10 Ball 1LE22011CD314GA3 733 GP TC 575 GP10 Ball 1LE22011CD313GA3 733 GP TC /460 GP10 Ball 1LE22011AA314GA3 425 GP TC 575 GP10 Ball 1LE22011AA313GA3 425 GP TC /460 GP10 Ball 1LE22011AB414GA3 426 GP TC 575 GP10 Ball 1LE22011AB413GA3 426 GP TC /460 GP10 Ball 1LE22011CC314GA3 540 GP TC 575 GP10 Ball 1LE22011CC313GA3 540 GP TC /460 GP10 Ball 1LE22012AD114GA3 829 GP TC 575 GP10 Ball 1LE22012AD113GA3 829 GP TC /460 GP10 Ball 1LE22011CA114GA3 498 GP TC 575 GP10 Ball 1LE22011CA113GA3 498 GP TC /460 GP10 Ball 1LE22011CB114GA3 512 GP TC 575 GP10 Ball 1LE22011CB113GA3 512 GP TC /460 GP10 Ball 1LE22012AC114GA3 666 GP TC 575 GP10 Ball 1LE22012AC113GA3 666 GP TC /460 GP10 Ball 1LE22012AD214GA GP TC 575 GP10 Ball 1LE22012AD213GA GP
7 - TEFC Motors DE List Multiplier Nom. Weight Stock C-Face, Horizontal, Footless - continued TC /460 GP10 Ball 1LE22011CA314GA3 619 GP TC 575 GP10 Ball 1LE22011CA313GA3 619 GP TC /460 GP10 Ball 1LE22011CB314GA3 569 GP TC 575 GP10 Ball 1LE22011CB313GA3 569 GP TC /460 GP10 Ball 1LE22012AC214GA3 944 GP TC 575 GP10 Ball 1LE22012AC213GA3 944 GP TC /460 GP10 Ball 1LE22012BD114GA GP TC 575 GP10 Ball 1LE22012BD113GA GP TC /460 GP10 Ball 1LE22012AA114GA3 778 GP TC 575 GP10 Ball 1LE22012AA113GA3 778 GP TC /460 GP10 Ball 1LE22012AB114GA3 757 GP TC 575 GP10 Ball 1LE22012AB113GA3 757 GP TC /460 GP10 Ball 1LE22012BC114GA GP TC 575 GP10 Ball 1LE22012BC113GA GP TC /460 GP10 Ball 1LE22012BD214GA GP TC 575 GP10 Ball 1LE22012BD213GA GP TC /460 GP10 Ball 1LE22012AA214GA3 900 GP TC 575 GP10 Ball 1LE22012AA213GA3 900 GP TC /460 GP10 Ball 1LE22012AB214GA3 900 GP TC 575 GP10 Ball 1LE22012AB213GA3 900 GP TC /460 GP10 Ball 1LE22012BC214GA GP TC 575 GP10 Ball 1LE22012BC213GA GP TC /460 GP10 Ball 1LE22012BA114GA GP TC 575 GP10 Ball 1LE22012BA113GA GP TC /460 GP10 Ball 1LE22012BB114GA GP TC 575 GP10 Ball 1LE22012BB113GA GP TC /460 GP10 Ball 1LE22012BA214GA GP TC 575 GP10 Ball 1LE22012BA213GA GP TC /460 GP10 Ball 1LE22012BB214GA GP TC 575 GP10 Ball 1LE22012BB213GA GP
Severe Duty / IEEE TEFC Motors SD100 IEEE841 / RGZEESDX
/ IEEE 841 - TEFC Motors Introduction The IEEE 841 motors meets or exceeds IEEE 841-2001 standards for energy efficiency, high performance, variable speed operation, rugged construction and long service
More informationAC Motors Selection and Pricing Guide
AC Selection and Pricing Guide Catalog D81.2, U.S./Canada 2009-2010 NEMA and IEC Answers for Industry. The world s most efficient line of low voltage AC motors. Siemens NEMA and IEC motors are designed
More informationSIMOTICS NEMA Motors. Low Voltage AC Motors Selection and Pricing Guide. usa.siemens.com/motors
SIMOTICS NEMA Motors Low Voltage AC Motors Selection and Pricing Guide usa.siemens.com/motors D81.2 Edition 04/2015 Buy With Confidence Buying a motor can be a difficult process. Is it the right size for
More informationLow Voltage AC Motors
Low Voltage AC Motors Selection and Pricing Guide Catalog D81.2-2012, USA Edition SIMOTICS NEMA Motors www.usa.siemens.com/nema-motors Table of Contents Introduction Wide Selection of Motors 1-1 Energy
More informationSevere duty cast iron frame motors
Severe duty cast iron frame motors When the going gets tough, these motors keep going SIMOTICS NEMA Low Voltage Motors www.usa.siemens.com/motors Siemens SIMOTICS low voltage severe duty motors Built to
More informationPowerful + Efficient + Reliable
1 THRU 50HP NEMA 140T THRU 449T HIGH EFFICIENCY ISO9001 CERTIFIED Powerful + Efficient + Reliable TEFC CAST IRON FRAMES CLASS F INSULATED 1.15 SERVICE FACTOR OVER SIZED BEARINGS LOW-LOSS ELECTRICAL GRADE
More informationGeneral purpose aluminum frame motors. The right choice for efficiency and performance. SIMOTICS NEMA Low Voltage Motors.
General purpose aluminum frame motors The right choice for efficiency and performance SIMOTICS NEMA Low Voltage Motors www.usa.siemens.com/motors Siemens GP100A Aluminum Frame Motors Precision construction,
More informationTHREE PHASE MOTORS RIGID BASE GENERAL PURPOSE Rigid Base
THREE PHASE MOTORS DRIP-PROOF RPM 60 HP Hz 1/4 1725 1725 S56 100027 $246 A 16 208-230/460 1.4 58.0 9.24 1/3 3450 48 101447 251 A 14 208-230/460 1.4 68.0 9.00 1725 48 100446 266 A 17 208-230/460 1.6 64.3
More informationGeneral purpose cast iron frame motors. The right choice for optimal durability, efficiency and performance. SIMOTICS NEMA Low Voltage Motors
General purpose cast iron frame motors The right choice for optimal durability, efficiency and performance SIMOTICS NEMA Low Voltage Motors www.usa.siemens.com/motors Siemens SIMOTICS low voltage cast
More informationSUPER-MAX INDUCTION MOTOR
Compliance Certificate No.CC014A CSA Listed No. 1077944 SUPER-MAX INDUCTION MOTOR PREMIUM EFFICIENCY SERIES CSA Certified for Class I Division 2 Groups A, B, C, D T3C TOTALLY ENCLOSED FAN COOLED FRAME:
More informationPremium Efficiency Exceeds Effciency Levels Mandated by CSA C390 and EPACT 92
Premium Efficiency Exceeds Effciency Levels Mandated by CSA C390 and EPACT 9 Crown Triton TM Series Premium Efficiency Motors Experience Combined with Technology yundai Induction Motors use Finite Element
More informationINDEX NEMA PREMIUM EFFICIENCY
INDEX S EED EXC DS R TS O DAR MEE E STAN CE THREE-PHASE MOTORS - FEATURES & LIST PRICES THREE-PHASE MOTORS TEFC - Foot-Mount................... A-51 A-54 TEFC C-Flange........................ A-55 ODP
More information5 Year Warranty Premium Efficiency, TEFC Enclosure Inverter Duty Motors Corona Resistant Magnet Wire CSA Certified, UL, CE NEMA MG1 (2003) Part 31,
5 Year Warranty Premium Efficiency, TEFC Enclosure Inverter Duty Motors Corona Resistant Magnet Wire CSA Certified, UL, CE NEMA M1 (003) Part 31, DefinitePurpose Inverter Fed Motors Inverter Shield TM
More informationNORDIC-PREMIUM EFFICIENCY
CANADIAN STANDARDS ASSOCIAT ION EEV NORDIC-PREMIUM EICIENCY CAST IRON PREMIUM EICIENCY ELECTRIC MOTORS VD COMPATIBLE Meets or exceeds NeMA MG-1 table 1-1 premium efficiency corona & spike resistant MAGNet
More informationMAX-E1 FAMILY NEMA PREMIUM EFFICIENCY
MAX-E1 FAMILY NEMA PREMIUM EFFICIENCY TYPE AEHE, AEHH8N, AEHH8NCF, AEUH8NDC Effective 05-01-13 Supercedes 08-01-11 APPLICATIONS: Fans & Blowers Compressor Any Severe Duty/ Petro-Chem/ Pumps Mixers Pulp
More informationX$DUltra NEMA Premium 7 Extra Severe Duty Motors Frame 3/4-250 HP
gmotors X$DUltra 7 841 NEMA Premium 7 Extra Severe Duty Motors 143-449 Frame 3/4-250 HP GE sets the standard... We are dedicated to the future. Since Edison s time at the leading edge of discovery, GE
More informationGE Energy. X$D Ultra 841. NEMA Premium Extra Severe Duty Motors Frame HP
GE Energy X$D Ultra 841 Premium Extra Severe Duty Motors 143-449 Frame 0.75-300 HP GE sets the standard with powerful features. We are dedicated to the future. Since Edison s time at the leading edge of
More informationThree Phase Modifiable NEMA Horizontal Motors Accessories and Modifications
1. Altitude Standard motors are designed for 3,300 feet altitude and 40 C ambient temperature. Atmospheric conditions at higher altitudes inhibit the motor s ability to dissipate heat, resulting in an
More informationMAX-E1 HIGH EFFICIENCY. Severe Duty
MAX-E1 HIGH EFFICIENCY Severe Duty DESIGN FEATURES & CONSTRUCTION ALL MAX-E1 MOTORS DELIVER THESE IMPRESSIVE DESIGN FEATURES HPE - High Pulse Endurance Wire Non-hygroscopic, Class F insulation system High-grade,
More informationDesign Standard. Electric Motors. Detailed specifications follow. PART 1 - GENERAL
Design Standard Detailed specifications follow. PART 1 - GENERAL 1.01 SCOPE This design guidelines contained herein include the requirements of electric motors utilized for electric motor driven systems
More information7.0 High HP Low and Medium Voltage
TABLE OF CONTENTS 7.0 High HP Low and 7.1 Quantum LMV - TEFC Low Voltage 7.7 Quantum LMV - TEFC 7.12 449 Frame TEFC 7.16 WPII, TEFC, TEAAC Standard Features 7.17 WPII Pricing and Kits 7.20 Pegasus MHV
More informationBrake Motors Aluminium Frame Improved Efficiency EFF2
Motors Energy Automation Coatings Brake Motors Aluminium Frame Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC Output: 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More informationFeatures and Benefits
Features and Benefits ELECTRICAL DESIN z 1 500 HP; 2, 4, 6 pole z 3600, 1800, 1200 RPM z 3 Phase, 60 Hz, 460V z Motors can be rerated for 380, 400 and 415 VAC at 50 Hz. z Designed to meet NEMA M1, M13,
More informationPowered to Perform. Electric Motors
Powered to Perform Electric Motors Built and Tested to Deliver Trans-Power brand motors use tested, proven designs to keep running strong day after day. They also include features that translate into reliability
More informationAluminium Frame Motors Improved Efficiency EFF2
Motors Energy Automation Coatings Aluminium Frame Motors Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC : 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More informationSECTION MOTOR REQUIREMENTS for HVAC
PART 1 GENERAL 1.1 SECTION INCLUDES A. Single-phase electric motors B. Three-phase electric motors 1.2 REFERENCES SECTION 23 05 13 MOTOR REQUIREMENTS for HVAC A. ABMA 9 - Load Ratings and Fatigue Life
More informationGeneral Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features
TM WEG W21 Severe Duty motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments.
More informationMatched drive-motor combination package
usa.siemens.com/drives Matched drive-motor combination package Integrated Drive Systems SINAMICS V20 and SIMOTICS GP100A Answers for industry. Why choose Siemens for your integrated drive system? Integrated
More informationA. Motors shall be designed, built, and tested in accordance with the latest revision of the following standard documents.
PART 1: GENERAL 1.01 This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is to apply the
More informationProducts & Services EQ Series AC Drives. TEAMMaster WOUND ROTOR MOTORS WORLD SERIES SYNCHRONOUS MOTORS. EXPLOSION PROOF (Division 1, Zone 1)
630-543-7867 Products & Services EQ7 1-1000 hp Intelligent Keypad with Extensive Diagnostics Select Any of 4 Control Methods - V/ Hz - Dynamic Torque - Sensorless Vector - Closed-loop Vector Quick Setup
More informationThe Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
More informationThe Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
More informationThe Best Value in Washdown Duty Motors and Drives
The Best Value in Washdown Duty Motors and Drives Long before we invested in the people, equipment and material required to produce Baldor Reliance Washdown Duty motors and drives, we invested our time
More informationAEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1
AEEB AEVB LOW VOLTAGE SERIES Three-Phase Squirrel Cage Induction Motor Conforming to SS530 (Occasional Use) Conforming to IE1 STANDARD AND SPECIFICATION Performance: Meet the requirement of Singapore standard
More informationA. Fan motors and associated equipment shall be sized to operate at 110% of calculated loads and capacities.
PART 1: GENERAL 1.01 This design guidelines contained herein includes the requirements electric motors utilized for electric motor driven systems at Texas State University. It is the intention of this
More informationThe Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
More informationSingle and Three Phase General Purpose Motors
Single and Three Phase Single phase and three phase general purpose motors are designed to meet or exceed the energy efficiency requirements of the United States, Canada and Mexico for general purpose
More informationOver 525 Stock Motor Ratings. The Right Pump Motor for your Application. Leadership in Premium Efficiency. 1
Baldor Pump Motors Baldor Reliance is the leading supplier of Pump Motors to meet industrial and commercial applications. From industrial waste water to commercial pool pump motors Baldor Reliance pump
More information1/2 thru 50 Hp NEMA 56C thru 326T
200 Volt, TEFC, Foot Mounted Cast Iron Foot Mounted 200 & 7 Volt 1/2 thru 0 6C thru 26T Applications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200
More informationMedallion TM AC Motors Selection and Pricing Guide
2004 Medallion TM AC Motors Selection and Pricing Guide Siemens Medallion Motors for Solutions to Your Application Problems Severe Duty Motors Siemens SEVERE DUTY motors are built to give our customers
More informationApplications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200 volt power.
200 Volt, TEFC, Foot Mounted 1/2 thru 0 200 & 7 Volt 6C thru 26T Applications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200 volt power. Features:
More informationCast Iron Frame Motors For Zone 21 Improved Efficiency EFF2
Motors Energy Automation Coatings Cast Iron Frame Motors For Zone 21 Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP66, TEFC : 0.12 up to 250kW Frames: 63 up to 355M/L Voltage:
More informationPowerful + Efficient + Reliable EEV CAST IRON PREMIUM EFFICIENCY ELECTRIC MOTORS 5 YEAR WARRANTY
1 TRU 50P NEMA 140T TRU 449T PREMIUM EICIENCY VD DUTY ISO9001 CERTIIED CANADIAN STANDARDS ASSOCIAT ION Powerful + Efficient + Reliable EEV VOLUME I CAST IRON PREMIUM EICIENCY ELECTRIC MOTORS 5 YEAR WARRANTY
More informationVEM3546 1HP 1800RPM 3PH 56C Tefc Motor. Features. Description. Manufacturer Information
3804 outh treet 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 VEM3546 1HP 1800RPM 3PH 56C Tefc Motor Baldor Electric CO. Catalog Number Manufacturer Description Weight per unit Product
More informationSEWPCC UPGRADING/EXPANSION PROJECT BID OPPORTUNITY SECTION LOW-VOLTAGE AC INDUCTION MOTORS
SECTION 26 20 00 LOW-VOLTAGE AC INDUCTION MOTORS SEWPCC UPGRADING/EXPANSION PROJECT PART 1 GENERAL 1.1 RELATED SECTIONS A. This section applies only when referenced by a motor-driven equipment specification.
More informationSuper-E Premium Efficient Motors
Super-E Premium Efficient Motors Why Baldor? Customer Preference 20% 1985 50% 1990 90% 2000 94% 2003 95.5% 2007 The percentages shown reflect results of studies conducted in which Baldor was chosen as
More informationHVAC Motors Three Phase, TEFC, Foot Mounted, with Internal AEGIS
1 1 1/2 2 3 5 7 1/2 230/460 Volt HVAC TEFC, Foot Mounted, with Internal AEGIS 1 thru 100 56 thru 405T Bearing Protection Ring 10 15 20 25 30 40 50 3600 56 EM3545-G 773 K 12.23 33 77 230/460 1.4 143T EM3546T-G
More informationW22 NEMA Brake Motors - NEMA Premium
101 www.pamensky.com TEFC Standard Features Motors are compliant with DOE and NRCAN Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 208-230/460V, 575V Brake power supply: 220/230/240/460/575V Totally Enclosed
More information200 & 575 Volt Motors. 200 Volt, Three Phase, TEFC, Foot Mounted. 1/2 thru 50 Hp NEMA 56C thru 326T
Farm Duty 200 Volt, TEFC, Foot Mounted 200 & 7 Volt 1/2 thru 0 6C thru 26T Applications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200 volt power.
More informationWATTSAVER PREMIUM EFFICIENCY MOTORS GENERAL PURPOSE
PREMIUM EFFICIENCY MOTORS GENERAL PURPOSE The line of premium efficiency motors is now inverter capable. LEESON s unique IRIS voltage-spike-resistant insulation system is standard at no extra cost. motors
More informationFull Load Amps Model Number List 1.52/ / / / / /1.3 4/2 3.6/1.8 4/2 4.4/ / / /2.8 2.
Variable Speed & : VAC, Hz Input Ratings (V/Hz Mode) & Enclosures (V/Hz Mode) Enclosures (Frames 2-445T) (V/Hz Mode) Enclosures (Frames 447-449T) Variable (V/Hz Mode) & Enclosures PowerMatch With All Reliance
More informationSmall and Medium DC Motors
Large AC Small and Medium DC Motors RPM III Medium DC Motors General Information RPM AC Inverter Duty Inverter Duty AC Motors For pricing information or to place orders, go to www.ptplace.com M-222 RPM
More informationBRCP6SM ITT. CentriPro. 6-10" Submersible Motors. For 6" and Larger Deep Well Pumps. Engineered for life
ITT BRCP6SM CentriPro 6-10" Submersible s For 6" and Larger Deep Well Pumps Engineered for life Single Phase, 6" s (1.15 S.F.) and Required Control Boxes Diameter F.L. S.F. Control Box HP kw Volts Order
More informationSmall and Medium DC Motors
Small and Medium DC Motors Inverter Duty AC Motors RPM AC Inverter Duty RPM III Medium DC Motors General Information Introduction M-283 Introduction General Information RPM III Medium DC Motors Inverter
More informationSTOCK ELECTRICAL PRODUCTS. SPECIFICATIONS AND PRICING June 2016
STOCK ELECTRICAL PRODUCTS SPECIFICATIONS AND PRICING June 016 STANDARD STEEL FRAME AND CAST IRON MOTORS Our standard Rolled Steel and Cast Iron Frame motors provide superior quality and unique designs
More informationTable of Contents 90% 50% 20%
Why Baldor? For over 80 years, Baldor has strived to provide customers with the best value and reliability in industrial electric motors. That dedication shows in customer preference for Baldor motors.
More informationMAX-VH. Vertical Hollow Shaft Motors
MAX-VH Vertical Hollow Shaft Motors Specifications OTHER PERFORMANCE CONSTRUCTION APPLICATION RATING Item Type Of Motors Design Standards Voltages Frequency Output Range RPM (SYN.) Time Duty Frame Size
More informationCommercial laundry dryer motors.
Commercial Laundry Dryer Single Phase, Dripproof, Resilient Base Commercial laundry dryer motors. Replaces Huebsch commercial laundry dryer motors Automatic reset thermal protection Special threaded shaft
More informationQuick and Easy Voltage Flexibility for NEMA and Metric IEC Motors Motors are re-rated from stock models to 575V in as little as (1) business day
Elektrim 7V s Quick and Easy Voltage Flexibility for NEMA and Metric IEC s s are re-rated from stock models to 7V in as little as () business day Available 7V s: -0 HP NEMA Premium Performance Series s
More informationDefinite Purpose Motors. Three Phase, Two Speed, TEFC, Foot Mounted. Applications: Fans, blowers, machine tools, hoists, conveyors, pumps.
Three Phase, Two Speed, TEFC, 1 thru 25 56 thru 324T Applications: Fans, blowers, machine tools, hoists, conveyors, pumps. Features: Lifting eye bolt mounted at top center 215T frame and larger for easy
More informationAC Induction Motors. Installation and operating instructions
AC Induction Motors Installation and File No: 48.80 Date: january 28, 2014 Supersedes: 48.80 Date: july 30, 2013 contents Receiving inspection and handling 4 Installation / mounting 4 Location 5 Electrical
More informationPump Motors. Information. General. Single Phase Motors. Industrial Motors. General Purpose. Severe Duty Motors
General Industrial Pump HVAC Farm Duty 8 Pump From industrial wastewater to fire suppression systems or commercial pools, Baldor Reliance pump motors provide value by increasing reliability and reducing
More informationODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame. Australian Version October 2013
ODP SERIES PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS C280M to C355LB Frame Australian Version October 2013 ODP SERIES (OPEN DRIP PROOF) PREMIUM INDUSTRIAL OPEN DRIP PROOF MOTORS, C280M TO C355LB FRAME
More informationDefinite Purpose Motors. Three Phase, Two Speed, TEFC, Foot Mounted. 3/4 thru 25 Hp NEMA 56 thru 324T
Unit Handling Brake 200 & 575 Volt IEC & Controls DC 158 Two Speed, TEFC, Cast Iron 3/4 thru 25 56 thru 324T Applications: Fans, blowers, machine tools, hoists, conveyors, pumps. Features: Designed for
More informationROGERS MACHINERY COMPANY, INC
KOBELCO KNW SERIES Sample Specifications AIR-COOLED, OIL-FREE AIR COMPRESSOR Frame 0, 1, 2 50 500 HP ROGERS 2110_KA.doc Effective: 03-24-17 Supersedes: 04-06-15 Page 1 of 9 1. SPECIFICATIONS SCOPE 1.1
More informationW21 HIGH EFFICIENCY GENERAL PURPOSE MOTORS
W21 HIGH EFFICIENCY MOTORS!"#$&'#(&)*"&+,-&"./&0,,12#3&4,.5&!"00&678997:;?@&ABCD7=EF=G Data subject to change without notice. PDF processed with CutePDF evaluation edition www.cutepdf.com :7BD ROLLED
More informationProduct Information Packet EM4109T 40HP,3530RPM,3PH,60HZ,324TS,1058M,TEFC,F
Product Information Packet EM4109T 40HP,3530RPM,3PH,60HZ,324TS,1058M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationMASSENGALE ARMATURE WORKS BALDOR MOTORS TYPICALLY IN STOCK
HP Catalog # DESCRIPTION.5 M3108.5HP,1725RPM,3PH,60HZ,56,3416M,OPEN,F1,N Features: Ball Bearings Locked drive end bearing Heavy gauge steel frame APPLICATIONS: Pumps, fans, conveyors, machine tools, gear
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Vertical Hollowshaft Electric Motors C O N T E N T S
Revised 04/14/2016 SPECIFICATIONS - DETAILED PROVISIONS Section 16151 - Vertical Hollowshaft Electric Motors C O N T E N T S PART 1 - GENERAL... 1 1.01 SCOPE... 1 1.02 SPECIFIC PROJECT REQUIREMENTS...
More informationList Price. Mult. Sym. C Dim. Single Phase
Single and Three Phase, Foot Mounted Explosion Proof 1/4 thru 300 48 thru 449TY Applications: Ideal for use where hazardous fumes or dust may be present. Features: U.L. and CSA approved for Class I, Group
More information1/4 thru 300 Hp NEMA 48 thru 449TY. List Price. Mult. Sym. C Dim. Single Phase
Single and Three Phase, Foot Mounted Explosion Proof 1/4 thru 300 48 thru 449TY Applications: Ideal for use where hazardous fumes or dust may be present. Features: U.L. and CSA approved for Class I, Group
More informationSIMOTICS LP100. High-efficient motors for severe duty vertical pump applications in the North American market
Ingenuity for Life Driving the Digital Enterprise SIMOTICS LP100 High-efficient motors for severe duty vertical pump applications in the North American market siemens.com/hm16 SIMOTICS LP100: In-Line Vertical
More informationIndustrial and Commercial Duty IEC Motors
Industrial and Commercial Duty IEC Motors A Regal Brand Five product families delivering a world of opportunity LEESON Passport Series IEC Motors. There s a world of opportunity right here at home. The
More informationSeries E4F E5F
Three Phase Induction Motors With Rotors Wound for Hoists Series E4F 160-315 E5F 355-400 ASI NT 003.1 I N D E X Use 2 Electrical Tolerances 9 Mechanical Tolerances 9 General Characteristics 2 Technical
More informationLarge AC Motors. Synchronous Reluctance Kiln Duty Submersible Accessories & Kits. Large AC Motors. Modifications Large AC M-211
Synchronous Reluctance Kiln Duty Submersible Accessories & Kits Modifications Large AC M-211 large_ac_motors.fm Page 212 Monday, December 15, 2003 3:47 PM, Quickship and Modifiable 250 HP - 1500 HP 3600
More informationProduct Information Packet EM4110T 40HP,1775RPM,3PH,60HZ,324T,1254M,TEFC,F1
Product Information Packet EM4110T 40HP,1775RPM,3PH,60HZ,324T,1254M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationProduct Information Packet CEM4110T 40HP,1775RPM,3PH,60HZ,324TC,1254M,TEFC,F
Product Information Packet CEM4110T 40HP,1775RPM,3PH,60HZ,324TC,1254M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationProduct Information Packet CP2334T 20HP,1760RPM,3PH,60HZ,256T,0760M,TEFC,F1
Product Information Packet CP2334T 20HP,1760RPM,3PH,60HZ,256T,0760M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationPRODUCTIVITY HAS A NAME. Torque Master Motors
PRODUCTIVITY HAS A NAME Torque Master Motors Premium Efficient Torque Master Motors TORQUE MASTER PE A FORCE TO BE RECKONED WITH Quality. Performance. Dependability. That s what the Torque Master series
More informationExplosion Proof Motors
SINGLE-PHASE Foot Mount...A-110 C-Face Foot Mount...A-110 THREE-PHASE Foot Mount...A-112 C-Face Foot Mount...A-116 C-Face Footless...A-117 JP Foot Mount...A-117 ATEX Foot Mount...A-120 A-108 Fractional
More informationProduct Information Packet EM4107T 25HP,3520RPM,3PH,60HZ,284TS,0944M,TEFC,F
Product Information Packet EM4107T 25HP,3520RPM,3PH,60HZ,284TS,0944M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More information841XL PREMIUM EFFICIENCY MOTORS
841XL PREMIUM EFFICIENCY MOTORS 8 4 1 X L A C M O T O R S D E S I G N E D T O M E E T Y O U R S E V E RE D U T Y N E E D S As an original member of the NEMA Energy Task Force, Rockwell Automation has
More informationA Full Line of Low Voltage IEC Motors In-Stock
BUILT TO PERFORM WHERE OTHERS FAIL A Full Line of Low Voltage IEC Motors In-Stock Distributed by Elektrim Motors Authorized Distributor: www.elektrimmotors.com or call 855-Go-Elektrim 0.08-220HP Low Voltage
More informationSample Specifications 2110_KA.DOC KOBELCO KNW SERIES 1 OF 10 AIR-COOLED, OIL FREE AIR COMPRESSOR Frame 0, 1, HP
KOBELCO KNW SERIES 1 OF 10 1. SPECIFICATIONS SCOPE 1.1 This specification covers the requirement for supply of a packaged oil-free rotary screw air compressor, Kobelco KNW Series model. 1.2 Any and all
More informationROGERS MACHINERY COMPANY, INC
KOBELCO KNW SERIES Sample Specifications ROGERS MACHINERY COMPANY, INC WATER-COOLED, OIL-FREE AIR COMPRESSOR Frame 00 20-50 HP 2110_00.doc Effective: 03/24/17 Supersedes: 10-11-13 Page 1 of 8 1. SPECIFICATION
More informationModifiable TITAN Horizontal Motors Accessories and Modifications
36. Rotor, Standard And Optional Construction Standard rotor construction of 449, 5000 and 5800 frame TITAN products is typically die-cast aluminum. 720 RPM and slower is typically fabricated aluminum.
More informationA6C A5C-B6C B5C B5H A6C A5C B6C B5C B5H. Model. Up to kw. Power. Up to V. Voltages. Model IP55. Frame Pole 2, 4, 6, 8 and 10
A6C A5C-B6C B5C B5H Model Power Voltages Model IP55 A6C A5C B6C B5C B5H Up to 2.400 kw Up to 11.000 V LV A6C - B6C - A5C - B5C MV B5H Frame 71 560 Pole 2, 4, 6, 8 and 10 Cooling IC 411 ( IC 416 optional)
More informationProduct Information Packet CEM2333T 15HP,1765RPM,3PH,60HZ,254TC,0944M,TEFC,F
Product Information Packet CEM2333T 15HP,1765RPM,3PH,60HZ,254TC,0944M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationProduct Information Packet EM4104T 30HP,1760RPM,3PH,60HZ,286T,1056M,TEFC,F1
Product Information Packet EM4104T 30HP,1760RPM,3PH,60HZ,286T,1056M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationProduct Information Packet EM3774T 10HP,1760RPM,3PH,60HZ,215T,0748M,TEFC,F1
Product Information Packet EM3774T 10HP,1760RPM,3PH,60HZ,215T,0748M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationProduct Information Packet VEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1
Product Information Packet VEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationProduct Information Packet M2333T-9 15HP,1760RPM,3PH,60HZ,254T,0940M,TEFC,F1
Product Information Packet M2333T-9 15HP,1760RPM,3PH,60HZ,254T,0940M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More information: B3; B5; B14; B34; B35; V1
ATT WE series (Eff1) are 3-phase TEFC Cast-Iron high efficiency general purpose induction motors, which are designed to meet or exceed the requirements for energy efficiency such as: European Eff1, Australia
More informationsteel standard SST DUCK components Epoxy Resin Rated Insulation System recognized stainless steel output shaft seal
Premium Efficiency Washguard Motors - Now Available! WASHGUARD MOTORS WASHGUARD MOTORS AVAILABLE IN FIVE STYLES Maximum service in critically clean or corrosive environments PREMIUM WASHGUARD ALL-STAINLESS
More informationNEMA Premium Efficiency T-Frame Motors. Three-Phase, TEFC Enclosures RELIABILITY MATTERS
NEMA Premium Efficiency T-Frame Motors Three-Phase, TEFC Enclosures RELIABILITY MATTERS RELIABILITY MATTERS Aurora Motors a leading global supplier of NEMA premium vertical pump motors and T-frame motors
More informationProduct Information Packet CEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1
Product Information Packet CEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationPERFORMANCE DATA 3-PHASE INDUCTION MOTOR
ISSUED October 28, 2013 TYPE AETACF PERFORMANCE DATA 3-PHASE INDUCTION MOTOR ENCLOSURE TEFC CATALOG# GV0/74C NAMEPLATE INFORMATION OUTPUT FRAME RATED INS. POLE VOLTAGE HZ HP KW SIZE AMBIENT CLASS 3/4 0.56
More informationAC METRIC (IEC) MOTORS THREE PHASE
These high efficiency motors meet North American performance standards and EPACT energy efficiency mandates, and have.5 service factors. Typically used for replacement on machine tools, textile machinery
More informationABMA , Radial Bearings of Ball, Cylindrical Roller and Spherical Roller Types Metric Design.
Specification CT841-2016 Standard for Petroleum and Chemical Industry Definite Purpose, Severe- Duty, Totally Enclosed Air Over (TEAO) Permanent Magnet Synchronous Cooling Tower and Air Cooled Heat Exchanger
More informationProduct Information Packet CEM4103T 25HP,1775RPM,3PH,60HZ,284TC,1054M,TEFC,F
Product Information Packet CEM4103T 25HP,1775RPM,3PH,60HZ,284TC,1054M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More information