Single and Three Phase General Purpose Motors
|
|
- Merryl Candice Simpson
- 6 years ago
- Views:
Transcription
1 Single and Three Phase Single phase and three phase general purpose motors are designed to meet or exceed the energy efficiency requirements of the United States, Canada and Mexico for general purpose industrial motors, while delivering high starting torque, overload capability and superior reliability. The extensive line of motors are available in a wide variety of enclosure construction from industrial steel band open designs where water and dust exposure is moderate, to totally enclosed cast iron designs where exposure to water, dust and corrosives exists. The Super-E provide Premium efficiency and are Inverter ready with wide variable torque speed ranges as standard. For motors with features outside the capabilities below, please contact your Baldor Reliance sales representative. Key Baldor Reliance motors meet or exceed all efficiency requirements for US, Canada and Mexico regulations Suitable for Inverter use per MG Part.4.4. Designed for longevity with a year warranty on premium efficient Super-E Industrial / Horsepower Product Line Totally Enclosed () Open Totally Enclosed () (Three Phase) Open (Three Phase) size range for stock products 4-50T 48-0T T Horse Power / - 5 /6-0 /8-400 /4-450 Horse Power /08-0 or 5/0 Volts S S Volts - - S S 0/460 Volts - - S S 60 Hz 460 Volts - - S S 575 Volts - - S S 00/4000 Volts - - S A, or 00, or 00,, 00 or 900,, 00 or 900 Speed Speed (60 Hz) Electrical Features Baldor Reliance motors meet or exceed all efficiency requirements for US, Canada and Mexico regulations S S S S Torque Design B Torques (most ratings) S S S S Service Factor.5 Service Factor Continuous (most ratings) S S S S & Temp. Rise Class F insulation with Class B Service Factor S S S S Inverter Ready Super E meets MG Part S S 6 Lead Dual Connection S S - - Electrical 9 Lead Dual Connection - - S S Connection Lead Wye Delta connection - - S S Mechanical Features IP Ingress Protection - S - S IP Code IP44 Ingress Protection S - S - IP54 Ingress Protection A - A - Heavy Gauge Steel S S S S Cast Iron frame A - S A Lifting provisions positioned for easy handling in the application (motors over 70 Lbs) S S S S Bearings High performance Ball Bearings designs S S S S Roller Bearing Design -TR suffix - - S A Lubrication Super-premium Mobil Polyrex EM Series Grease S S S S Cast Aluminum S S S S Conduit Box Gasketed Cast Aluminum S - S A Gasketed Cast Iron frame - - S A Nameplate Laser etched naemplate with highly legible font S S S S 50 Hz Stamping (, 4, 6 Pole -5 ) on Super E A A S A Other Key Features Warranty Warranty - in number of months from manufacture ( Premium Super E ) Warranty - in number of months from manufacture S = Standard A = Available through Mod Express or as custom Pump HVAC
2 , TEFC, Foot Mounted / thru 5 Industrial Dynamically balanced rotor to increase bearing life Superior switch design provides optimized torque profiles Air Handling Pump HVAC / 4 L5 96 K /0, 0 /8 4 L5 0 K /0., 0 4 L5 08 K /0.6, 0 4 L54 8 K /0.6, 0 /6 4 L55 6 K /0.8, 0 48 L400 5 K /0.9, L40 47 K /0., 0 4 L56 40 K /0, 0 48 EL40 40 K /0.,, 65 /4 48 L40 44 K /0.5, 0 48 L40M 94 K /0.5, L K /0., 0 56 L K /0.6, 0 48 EL K /08-0.6,, L405 K / L K /0, 0 48 L406M 44 K /0, 0 / 56 EL K /0.6,, L50 5 K /0, 0 56 L50M 44 K /0, L K /0.7, 0 56 L50 55 K /0.7, 0 48 L K /0.5, 0 56 EL K /0.5, L50 54 K /0.5, 0 48 L K /0.7, 0 48 L409M 487 K /0.7, 0 / 56 EL K /0.,, L K /0.7, 0 56 L504A 495 K /0.7, 0 56 L504M 487 K /0.7, /56H L K /0.9, 0, 6 56 EL506 5 K /0.9, L K /0 4.8, 0 56 EL K /08-0.,, 65 /4 56 L K /0 4. 0, L507A 598 K /0 4. 0, L507M 57 K /0 4. 0, /56H L K /0.9, 0, 6, 65 4T L508T 89 L /0.9, 0, 65
3 , TEFC, Foot Mounted 56/56H EL K / , 65 56/56H L K /0 5.9, 0, 6 56/56H L509M 5 K /0 6, 6 56/56H L50A 67 K /0 6.5, 0, 6 56/56H L50M 649 K /0 6.5, 0, 6 56/56H EL K /0 4., 6, 65 56/56H L50 54 K /0 6.4, 0, 6 4T L50T 55 L /0 6.4, 0 4T L50TM 649 L /0 6.5, 0 56/56H L5 69 K /0 8, 0, 6 56/56H L5M 708 K /0 7.5,, 6 4T L5T 607 L /0 8, 0 56/56H L54 65 K /0 6. 0, 6, 65 56/56H L54A 797 K /0 8, 6, 65 / 56/56H L54M 7 K /08-0 8, 6, 65 56/56H EL54 87 K /0 6., 6, 65 45T EL54T 87 L /0 6., 65 45T L54T 64 L / T L54TM 7 L /08-0 8, T L6T,657 L /0 8., 0, 65 56/56H L K /0.5,, 0, 6 56/56H L55M 87 K /0.5,, 6 45T L55T 797 L /0.5,, 0 45T EL55T,0 L / , 65 56HZ L56TM,04 K , 57 45T L56T,0 L /0 8.8, 65 8T L605T 905 L /0.5, 0 8T L605TM,04 L /0, 8T EL605T,9 L /0 8.8, 65 8T EL606T, L /0.4, 65 8T L606T 94 L /0 4.5,, 0 84T EL609T,90 L , 65 84T L609T,065 L /0 4, 0, 0, 65 84T L609TM,5 L /0 4.5, 0 84T EL608T,5 L , 0, 65 84T L608T,85 L , 0, 65 84T L608TM,6 L , T EL6T,658 L , 0, 65 84T L6TM,9 L , 0 T L708T,7 L , 0, 65 T L708TM,49 L , 65 7 / T L709T,655 L , 0, 65 5T L70T,679 L , 0, 0, T L7T,09 L , 0, 65 5T L7T,060 L , 0, T L77T 5,867 L , 0, 65 56T L9T 5,69 L Cast Iron Industrial Pump HVAC
4 , TEFC, C-Face /6 thru 0 Industrial Pump HVAC 4 Locked DE bearing to allow mounting in any configuration Dynamically balanced rotor to increase bearing life Superior switch design provides optimized torque profiles Gear Reducers C-Face, Foot Mounted /4 56C CL40 6 K /0.5 / 56C CL405 6 K / C CL50 79 K /0, 0 / 56C CL50 80 K /0.5, 0 56C CL K /0.7, 0 /4 56C CL506 4 K /0 4.8, 0 56C CL K /0 4. 0, 65 56C CL K /0 5.9, 0 56C CL K /0 6.4, 0 / 56C CL5 6 K /0 7.5, 0 56C CL K /0 6. 0, 65 56C CL55 86 K /0.5,, 0 45TC CL55T 8 L /0.5,, 0 45TC CL56TM,05 L TC CL69TM,68 L , TC CL608TM,48 L , 0 84TC CL6TM,44 L , 0 0 5TC CL7T,409 L , 0 5TC CL7T,48 L , 0 C-Face, Footless /6 56C KL400 5 K /0.9, C KL K /0., 0 /4 56C KL40 6 K /0.5, 0 / 56C KL405 5 K / C VL50 7 K /0, 0 56C VL50 76 K /0.5, 0 / 56C VL K /0.7, C VL K /0.9, 0 56C VL K /0 4.8, 0 56C VL506A 46 K /0 4.8 /4 56C VL K /0 4., 0, C VL K /0.9, 0, 65 56C VL K /0 5.9, 0 56C VL509A 56 K /0 6 56C VL50 57 K /0 6.4, 0 4TC VL50T 57 L /0 6.4, 0 / 56C VL5 66 K /0 8, 0 4TC VL5T 665 L /0 8, 0 56C VL K /0 6. 0, 65 45TC VL54T 654 L /0 6. 0, 65 56C VL55 80 K /0.5,, 0 45TC VL55T 86 L /0.5,, 0 8TC VL605T,57 L /0.5, 0 8TC VL606T,9 L /0 4.5,, 0 84TC VL609T,66 L /0 4, 0, 0, 65.
5 , ODP, Foot Mounted /6 thru 0 /6 /4 / / /4 / Red indicates NEW Product. Dynamically balanced rotor to increase bearing life Superior switch design provides optimized torque profiles Optimized airflow design providing higher horse power in a smaller package Air Handling 48 L00 79 K / L0 47 K / EL0 8 K / L0M 6 K /0.5 0, EL K / H EL K / EL K / EL06 4 K / H EL0 4 K / EL K / H EL0 487 K / EL08 40 K / H EL0 40 K / EL09 46 K / L09M 455 K /0 4. 0, 96 56H EL04 46 K / H L04M 455 K /0 4. 0, H EL05 7 K / H EL K / H EL K / H L07A 58 K /0 5. 0, 96 56H L07M 54 K /0 5. 0, H EL08 84 K / H EL09 58 K / H L09A 404 K / H L0M 69 K / , 6, 96 56H EL8 64 K / H EL8M 658 K / T L8T 56 L / T L8TM 586 L / H EL 600 K / H ELA 65 K / T LT 5 L / H EL9 755 K / H L9M 707 K /0 9 6, 96 45T EL9T 89 L / , 65 45T L9T 599 L / T LT 79 L / T LTM 780 L / Industrial Pump HVAC 5
6 , ODP, Foot Mounted Industrial 5 7 / 0 56H EL7 66 K / H EL7A 688 K / T L0T 758 L /0.5 0, 65 45T LT 7 L / T LTM 798 L / T EL405T,04 L /0 8.8, 65 8T L405T 75 L /0 0 8T EL406T,068 L / T L406T 86 L / T EL408T,06 L , 65 84T L408T 84 L /0 6 0, 65 84T L408TM 958 L /0 6 84T EL409T,68 L T L409T,06 L T EL40T, L , 65 84T L40T 96 LS , 0, 65 84T L40TM,65 L , 0 84T L40T 88 L , 0, 65 84T L40TM,65 L , 0, 65 T L508T,7 L T L509T,585 L , 0, 65 5T L50T,79 L , 65 5T L5T,999 L , 0 5T L5T,0 L , 65 Red indicates NEW Product. Pump HVAC 6
7 , ODP, C-Face /6 thru 5 Locked DE bearing to allow mounting in any configuration Dynamically balanced rotor to increase bearing life Superior switch design provides optimized torque profiles Optimized airflow design providing higher horse power in a smaller package Gear Reducers Industrial C-Face, Foot Mounted / 56C CEL0 440 K /0.7 5 / 56C CEL0 458 K / C CEL K /0.4 5 /4 56C CEL K / C CEL0 66 K / TC CL408TM 0 L / TC CL40TM 0 L , 0 C-Face, Footless, Drip Cover /6 56C KL00 99 K /0.9 0 /4 56C KEL0 4 K / C KEL05 4 K / C KL05A 96 K /0 0, 96 / 56C VL05A 9 K. 54 5/0.5 56C VEL0 440 K / C VL0A 5 K. 60 5/0 0, 96 56C VEL0 458 K / C VL0A 7 K /0.7 / 56C VEL K / C VL04A 40 K /0 4. 0, C VEL K / C VEL K / C VL06A 40 K /0 5.5 /4 56C VEL K / C VL07A 548 K / C VEL08 85 K / C VEL K / C VL09A 4 K / C VEL8 66 K / C VL8A 58 K / / 56C VEL 68 K / , 0 56C VLA 578 K / C VEL9 78 K / TC VLT 740 L / C VEL7 69 K / C VL7A 748 K /0 0 45TC VLT 754 L / TC VL406T 96 L /0.6 0, 65 84TC VL408T 97 L /0 6 0, 65 Red indicates NEW Product. Pump HVAC 7
Pump Motors. Information. General. Single Phase Motors. Industrial Motors. General Purpose. Severe Duty Motors
General Industrial Pump HVAC Farm Duty 8 Pump From industrial wastewater to fire suppression systems or commercial pools, Baldor Reliance pump motors provide value by increasing reliability and reducing
More informationDefinite Purpose Motors. Three Phase, Two Speed, TEFC, Foot Mounted. 3/4 thru 25 Hp NEMA 56 thru 324T
Unit Handling Brake 200 & 575 Volt IEC & Controls DC 158 Two Speed, TEFC, Cast Iron 3/4 thru 25 56 thru 324T Applications: Fans, blowers, machine tools, hoists, conveyors, pumps. Features: Designed for
More informationOver 525 Stock Motor Ratings. The Right Pump Motor for your Application. Leadership in Premium Efficiency. 1
Baldor Pump Motors Baldor Reliance is the leading supplier of Pump Motors to meet industrial and commercial applications. From industrial waste water to commercial pool pump motors Baldor Reliance pump
More informationIEC Frame Motors. Metric IEC Frame Motors, Three Phase, 60 Hz, 230/460 Volts thru 1.5 kw (.25 thru 2 Hp) IEC D63 thru D90L
Brake 200 & 575 Volt & Controls DC 200 Metric, 60 Hz, 230/460 Volts B3, Foot Mounted Q Dim. 0.18 thru 1.5 kw (.25 thru 2 Hp) D63 thru D90L Applications: Replacement motors for equipment made in Europe
More informationThe Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
More informationDefinite Purpose Motors. Three Phase, Two Speed, TEFC, Foot Mounted. Applications: Fans, blowers, machine tools, hoists, conveyors, pumps.
Three Phase, Two Speed, TEFC, 1 thru 25 56 thru 324T Applications: Fans, blowers, machine tools, hoists, conveyors, pumps. Features: Lifting eye bolt mounted at top center 215T frame and larger for easy
More informationSECTION MOTOR REQUIREMENTS for HVAC
PART 1 GENERAL 1.1 SECTION INCLUDES A. Single-phase electric motors B. Three-phase electric motors 1.2 REFERENCES SECTION 23 05 13 MOTOR REQUIREMENTS for HVAC A. ABMA 9 - Load Ratings and Fatigue Life
More informationThe Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
More informationList Price. Mult. Sym. C Dim. Single Phase
Single and Three Phase, Foot Mounted Explosion Proof 1/4 thru 300 48 thru 449TY Applications: Ideal for use where hazardous fumes or dust may be present. Features: U.L. and CSA approved for Class I, Group
More information1/4 thru 300 Hp NEMA 48 thru 449TY. List Price. Mult. Sym. C Dim. Single Phase
Single and Three Phase, Foot Mounted Explosion Proof 1/4 thru 300 48 thru 449TY Applications: Ideal for use where hazardous fumes or dust may be present. Features: U.L. and CSA approved for Class I, Group
More informationApplications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200 volt power.
200 Volt, TEFC, Foot Mounted 1/2 thru 0 200 & 7 Volt 6C thru 26T Applications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200 volt power. Features:
More informationTHREE PHASE MOTORS RIGID BASE GENERAL PURPOSE Rigid Base
THREE PHASE MOTORS DRIP-PROOF RPM 60 HP Hz 1/4 1725 1725 S56 100027 $246 A 16 208-230/460 1.4 58.0 9.24 1/3 3450 48 101447 251 A 14 208-230/460 1.4 68.0 9.00 1725 48 100446 266 A 17 208-230/460 1.6 64.3
More informationThe Baldor Super-E. Over 1,000 Stock Motor Ratings. The Right Premium Efficient Motor for your Application. Leadership in Premium Efficiency
The Baldor uper-e In the mid-70s, a southeastern tire manufacturing plant asked Baldor to increase their plant s operating efficiencies. After analyzing the efficiencies of the plant s 75 Hp motors, Baldor
More informationVEM3546 1HP 1800RPM 3PH 56C Tefc Motor. Features. Description. Manufacturer Information
3804 outh treet 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 VEM3546 1HP 1800RPM 3PH 56C Tefc Motor Baldor Electric CO. Catalog Number Manufacturer Description Weight per unit Product
More informationSuper-E Premium Efficient Motors
Super-E Premium Efficient Motors Why Baldor? Customer Preference 20% 1985 50% 1990 90% 2000 94% 2003 95.5% 2007 The percentages shown reflect results of studies conducted in which Baldor was chosen as
More information1/2 thru 50 Hp NEMA 56C thru 326T
200 Volt, TEFC, Foot Mounted Cast Iron Foot Mounted 200 & 7 Volt 1/2 thru 0 6C thru 26T Applications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200
More informationThe Best Value in Washdown Duty Motors and Drives
The Best Value in Washdown Duty Motors and Drives Long before we invested in the people, equipment and material required to produce Baldor Reliance Washdown Duty motors and drives, we invested our time
More informationWhy Baldor? Table of Contents.
Pump Motors Why Baldor? Industry s shortest lead times/flexible manufacturing. Baldor has the industry s shortest lead times on custom motors just ten working days. Our unique LEAN FLEX FLOW manufacturing
More informationMAX-E1 FAMILY NEMA PREMIUM EFFICIENCY
MAX-E1 FAMILY NEMA PREMIUM EFFICIENCY TYPE AEHE, AEHH8N, AEHH8NCF, AEUH8NDC Effective 05-01-13 Supercedes 08-01-11 APPLICATIONS: Fans & Blowers Compressor Any Severe Duty/ Petro-Chem/ Pumps Mixers Pulp
More informationS R ATE TOO EG M R G G A
MOTORS AGGREGATE AGGREGATE MOTORS THE RIGHT PRODUCT IN THE TOUGHEST CONDITIONS For decades, aggregate operators have come to depend on Baldor products to keep their facilities operating at optimum efficiency
More information1/3 thru 2 Hp NEMA 56J. Mult. Sym. C Dim. Foot Mounted. Footless
Jet Pump,, TEFC 1/ thru 2 6J Pump Applications: Residential and industrial pumps, swimming pool pumps, etc. General Features: Diecast aluminum end plates with machined steel bearing seat insert. All threaded
More informationHVAC Motors Three Phase, TEFC, Foot Mounted, with Internal AEGIS
1 1 1/2 2 3 5 7 1/2 230/460 Volt HVAC TEFC, Foot Mounted, with Internal AEGIS 1 thru 100 56 thru 405T Bearing Protection Ring 10 15 20 25 30 40 50 3600 56 EM3545-G 773 K 12.23 33 77 230/460 1.4 143T EM3546T-G
More informationInverter Speed Ratio Information
Inverter Speed Ratio Information Guidelines for Application of General Purpose,, Single Speed on Variable Frequency Drives Meets NEMA MG1-2006 Part 30 and Part 31 Section 4.4.2 Unless stated otherwise,
More informationBaldor-Reliance CA501 Standard motor product catalog
Baldor-Reliance CA501 Standard motor product catalog CA501 effective July 1, 2018 Table of contents General information 5 notes 6 Approvals UL and CSA 7 Motors used outside of the United States 8 UL and
More information1/3 thru 2 Hp NEMA 56J. Aprx. Wt. (lb) Mult. Sym. C Dim. Foot Mounted. Footless
General Super-E Jet Pump,, TEFC Pump 1/ thru 2 6J Applications: Residential and industrial pumps, swimming pool pumps, etc. Features: Diecast aluminum end plates with machined steel bearing seat insert.
More information1 thru 30 Hp NEMA 56 thru 284T
Three Phase, Super-E Premium Efficient, TEFC 1 thru 30 56 thru 284T Features: Standard BA dimension. (C-Face may be added in ModExpress to EBM motors for C-Face with base). Spring-set brake. Power off
More informationDesign Standard. Electric Motors. Detailed specifications follow. PART 1 - GENERAL
Design Standard Detailed specifications follow. PART 1 - GENERAL 1.01 SCOPE This design guidelines contained herein include the requirements of electric motors utilized for electric motor driven systems
More information200 & 575 Volt Motors. 200 Volt, Three Phase, TEFC, Foot Mounted. 1/2 thru 50 Hp NEMA 56C thru 326T
Farm Duty 200 Volt, TEFC, Foot Mounted 200 & 7 Volt 1/2 thru 0 6C thru 26T Applications: Pumps, fans, compressors, blowers, machine tools, conveyors and many other applications requiring 200 volt power.
More informationNEMA MOTORS. Aggregate motors
NEMA MOTORS Aggregate motors 2 AGGREGATE MOTORS Aggregate motors The right product in the toughest conditions Building on the rich history of our mechanical power transmission products, you can expect
More informationThree-Phase General Purpose Motors
TEFC Foot Mount... A-32 TEFC C-Face Foot Mount.... A-42 TEFC C-Face Footless... A-46 ODP Foot Mount... A-50 ODP C-Face Foot Mount... A-56 ODP C-Face Footless.... A-60 ODP Resilient Base.... A-60 IEEE 841
More informationFeatures: Manual release Spring-set brake Vibration damping base Super-E motors have NEMA Premium efficiency Inverter ready Super-E motors. C Dim.
Single and Three Phase, TEFC 1/4 thru 30 Single Phase, 1/4 1800 56 BL3516 874 K 14.36 27 59.5 115/230 2.1 3 2, 30, 41, 60 1/3 1800 56 BL3517 921 K 15.46 27 60 115/230 3 3 30, 41 1/2 1800 56 BL3518 1,000
More informationW22 NEMA Brake Motors - NEMA Premium
101 www.pamensky.com TEFC Standard Features Motors are compliant with DOE and NRCAN Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 208-230/460V, 575V Brake power supply: 220/230/240/460/575V Totally Enclosed
More informationPowerful + Efficient + Reliable
1 THRU 50HP NEMA 140T THRU 449T HIGH EFFICIENCY ISO9001 CERTIFIED Powerful + Efficient + Reliable TEFC CAST IRON FRAMES CLASS F INSULATED 1.15 SERVICE FACTOR OVER SIZED BEARINGS LOW-LOSS ELECTRICAL GRADE
More informationA. Motors shall be designed, built, and tested in accordance with the latest revision of the following standard documents.
PART 1: GENERAL 1.01 This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is to apply the
More informationNEMA AC Motor C-Face Kits for Field Conversion
Gear s NEMA AC C-Face Kits for Field Conversion Features: Complete kits with all hardware necessary for converting Baldor 56 through 445T frame rigid base motors to C-Face mounting with base. For a Baldor
More informationMotor Accessories. NEMA AC Motor C-Face Kits for Field Conversion
Gearmotors and PT Components Grinders Gearmotors Servo s Mod Express Baldor Education Workshop 396 NEMA AC C-Face Kits for Field Conversion Description Type/ NOTE: NEMA BA Dimension will be non-standard
More informationSHADED RATINGS ARE CAST IRON FRAMES
Gearmotors and NEMA AC C-Face Kits for Field Conversion Features: Complete kits with all hardware necessary for converting 56 through 445T frame rigid base motors to C-Face mounting with base. For a conversion,
More informationProduct Information Packet ECP50504L-4 500HP,1789RPM,3PH,60HZ,5010,TEFC,F1
Product Information Packet ECP50504L-4 500HP,1789RPM,3PH,60HZ,5010,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationGeneral Purpose Three Phase Motors TEFC (IP55) High Efficiency. Standard Features
TM WEG W21 Severe Duty motors meet the most demanding severe duty application requirements. These TEFC motors are all cast iron construction, with enclosures rated IP55 to handle wet and dirty environments.
More informationWARREN COUNTY, N.Y. M/E REFERENCE A. Submit manufacturer's product data on all motors and adjustable speed drives.
SECTION 230513 - MOTORS AND ADJUSTABLE SPEED DRIVES PART 1 - GENERAL 1.1 DESCRIPTION A. Provide labor, materials, equipment and services as required for the complete installation designed in Contract Documents.
More informationThree Phase Modifiable NEMA Horizontal Motors Accessories and Modifications
1. Altitude Standard motors are designed for 3,300 feet altitude and 40 C ambient temperature. Atmospheric conditions at higher altitudes inhibit the motor s ability to dissipate heat, resulting in an
More informationINDEX NEMA PREMIUM EFFICIENCY
INDEX S EED EXC DS R TS O DAR MEE E STAN CE THREE-PHASE MOTORS - FEATURES & LIST PRICES THREE-PHASE MOTORS TEFC - Foot-Mount................... A-51 A-54 TEFC C-Flange........................ A-55 ODP
More informationExplosion Proof Motors
SINGLE-PHASE Foot Mount...A-110 C-Face Foot Mount...A-110 THREE-PHASE Foot Mount...A-112 C-Face Foot Mount...A-116 C-Face Footless...A-117 JP Foot Mount...A-117 ATEX Foot Mount...A-120 A-108 Fractional
More informationSUPER-MAX INDUCTION MOTOR
Compliance Certificate No.CC014A CSA Listed No. 1077944 SUPER-MAX INDUCTION MOTOR PREMIUM EFFICIENCY SERIES CSA Certified for Class I Division 2 Groups A, B, C, D T3C TOTALLY ENCLOSED FAN COOLED FRAME:
More informationW22 Medium Voltage Motors TEFC - Severe Duty
101 www.pamensky.com W22 Medium Voltage Motors TEFC - Severe Duty Standard Features Three-phase, 2, 4, 6 and 8 pole, 60Hz Voltage: 1200V, 2300V, 2400V, 3300V, 4000V, 4160V & 6600V Totally Enclosed Fan
More informationIndustrial and Commercial Duty IEC Motors
Industrial and Commercial Duty IEC Motors A Regal Brand Five product families delivering a world of opportunity LEESON Passport Series IEC Motors. There s a world of opportunity right here at home. The
More informationProduct Information Packet CP500808LR-4 800HP,897RPM,3PH,60HZ,G50,A95260M,TEFC,F
Product Information Packet CP500808LR-4 800HP,897RPM,3PH,60HZ,G50,A95260M,TEFC,F Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection,
More informationJM/JP Pump Motors. A Regal Brand
JM/JP Pump Motors A Regal Brand General Specifications: For use with close-coupled pumps having JP mounting and shaft dimensions. In such applications, the pump impeller is mounted directly on the motor
More informationSECTION COMMON MOTOR REQUIREMENTS FOR HVAC EQUIPMENT
SECTION 230513 - COMMON MOTOR REQUIREMENTS FOR HVAC EQUIPMENT PART 1 GENERAL 1.1 SECTION INCLUDES A. Single phase electric motors. B. Three phase electric motors. 1.2 REFERENCE STANDARDS A. ABMA STD 9
More informationSevere Duty is Standard with WEG W22 motors
W22 Severe Duty TEFC Severe Duty is Standard with WEG W22 motors W22 Severe Duty TEFC Severe Duty High performance with maximum energy efficiency is the goal of the new WEG electric motor. High efficiency
More informationCOOLING TOWER MOTORS Three-Phase TEFC & TEAO. Features that make a difference: Standard Features:
COOLING TOWER MOTORS Three-Phase TEFC & TEAO WEG s cooling tower motors are designed for operation in 100% humidity and the most corrosive environments. They designed to operate in either horizontal or
More informationWEG General Purpose Motors. TEFC W22 and Rolled Steel Motors
WEG General Purpose Motors TEFC W22 and Rolled Steel Motors USGP.2018 TWO SUPERIOR CHOICES ABLOECK AIL ILY AV READ IN ST Rolled Steel Robust base and eyebolts Superior Coolin System Cast Iron C-Flanes
More informationA. Fan motors and associated equipment shall be sized to operate at 110% of calculated loads and capacities.
PART 1: GENERAL 1.01 This design guidelines contained herein includes the requirements electric motors utilized for electric motor driven systems at Texas State University. It is the intention of this
More information5 Year Warranty Premium Efficiency, TEFC Enclosure Inverter Duty Motors Corona Resistant Magnet Wire CSA Certified, UL, CE NEMA MG1 (2003) Part 31,
5 Year Warranty Premium Efficiency, TEFC Enclosure Inverter Duty Motors Corona Resistant Magnet Wire CSA Certified, UL, CE NEMA M1 (003) Part 31, DefinitePurpose Inverter Fed Motors Inverter Shield TM
More informationMotor Accessories. C-Face Kits for Field Conversion NEMA AC Motors
Definite Purpose Unit Handling C-Face Kits for Field Conversion NEMA AC Features: Complete kits with all hardware necessary for converting Baldor 56 though 449T frame ridgid base motors to C-Face mounting
More informationSECTION MOTORS AND VARIABLE FREQUENCY DRIVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Related Sections: 1. Section 15050 - Basic Mechanical Requirements. 2. Section 15051 - Motors. 3. Section 15185 - Hydronic Pumps. 4. Section 15625 - Centrifugal
More informationBaldor Mod Express Modification Motor Mod Express Page
Page No. ATEX M1 Balance... 396 M1A Dynamic Balance of Rotors M2 Bearings... 396 M2A Sealed or Double Shielded M2B Ball to Roller M2C Bearing Thermocouples M2D Bearing RTD S M2E Add Double Sealed Bearings
More informationMod Express Modification Motor Mod Express Page
Page No. Grinders Generators Servo s Education Catalog Index District Offices M1 Balance........................................................................... 324 M1A Dynamic Balance of Rotors M2
More informationSECTION MOTORS & MOTOR CONTROLLERS
SECTION 15170 MOTORS & MOTOR CONTROLLERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Electric motors. B. Motor controllers for Packaged equipment. 1.02 SUBMITTALS A. Wiring diagrams with electrical characteristics
More informationProduct Information Packet VEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1
Product Information Packet VEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationFull Load Amps Model Number List 1.52/ / / / / /1.3 4/2 3.6/1.8 4/2 4.4/ / / /2.8 2.
Variable Speed & : VAC, Hz Input Ratings (V/Hz Mode) & Enclosures (V/Hz Mode) Enclosures (Frames 2-445T) (V/Hz Mode) Enclosures (Frames 447-449T) Variable (V/Hz Mode) & Enclosures PowerMatch With All Reliance
More informationInverter Duty and Inverter Duty - Vector Performance AC Motor Product Line
Large AC Inverter Duty and Inverter Duty - Vector Performance AC Motor Product Line Inverter Duty 1/3-2 HP, 56-140 frame sizes, Explosion Proof, Class I, Groups C & D, Class 2, Groups F & G, XT - Extra
More informationCatalog. Brochure. Baldor explosion proof AC and DC Motors. Catalog
Brochure Baldor explosion proof AC and DC Motors We provide motors, generators and mechanical power transmission products, services and expertise to save energy and improve customers processes over the
More informationLVElectric Motors Basics
LVElectric Motors Basics Selection of electric motors has to be made using 3 different categories : By its electric design. By its mechanical design. By its insulation system The most important features
More information7.0 High HP Low and Medium Voltage
TABLE OF CONTENTS 7.0 High HP Low and 7.1 Quantum LMV - TEFC Low Voltage 7.7 Quantum LMV - TEFC 7.12 449 Frame TEFC 7.16 WPII, TEFC, TEAAC Standard Features 7.17 WPII Pricing and Kits 7.20 Pegasus MHV
More informationMASSENGALE ARMATURE WORKS BALDOR MOTORS TYPICALLY IN STOCK
HP Catalog # DESCRIPTION.5 M3108.5HP,1725RPM,3PH,60HZ,56,3416M,OPEN,F1,N Features: Ball Bearings Locked drive end bearing Heavy gauge steel frame APPLICATIONS: Pumps, fans, conveyors, machine tools, gear
More informationSEWPCC UPGRADING/EXPANSION PROJECT BID OPPORTUNITY SECTION LOW-VOLTAGE AC INDUCTION MOTORS
SECTION 26 20 00 LOW-VOLTAGE AC INDUCTION MOTORS SEWPCC UPGRADING/EXPANSION PROJECT PART 1 GENERAL 1.1 RELATED SECTIONS A. This section applies only when referenced by a motor-driven equipment specification.
More informationEPACT ENERGY POLICY ACT OF 1992: THE SCOPE OF ELECTRIC MOTORS SUBJECT TO EFFICIENCY STANDARDS ON OCTOBER
EPACT ENERGY POLICY OF 1992: THE SCOPE OF ELECTRIC MOTORS SUBJECT TO EFFICIENCY STANDARDS ON OCTOBER 24, 1997 The Energy Policy Act of 1992 (EPAct) covering efficiency levels of general purpose industrial
More informationAC METRIC (IEC) MOTORS THREE PHASE
These high efficiency motors meet North American performance standards and EPACT energy efficiency mandates, and have.5 service factors. Typically used for replacement on machine tools, textile machinery
More informationDC Motors & Controls for many different applications
DC Motors & Controls for many different applications Baldor offers the widest variety of DC Motors. From 1/50 to 3000 horsepower, our rugged industrial designs may be used to power everything from a medical
More informationPremium Efficiency Exceeds Effciency Levels Mandated by CSA C390 and EPACT 92
Premium Efficiency Exceeds Effciency Levels Mandated by CSA C390 and EPACT 9 Crown Triton TM Series Premium Efficiency Motors Experience Combined with Technology yundai Induction Motors use Finite Element
More informationProduct Information Packet L1317A 2HP,3450RPM,1PH,60HZ,56/56H,3528L,OPEN
Product Information Packet L1317A 2HP,3450RPM,1PH,60HZ,56/56H,3528L,OPEN Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationA HP,1785RPM,3PH,60HZ,449TDZ,A44140M,TE
Product Information Packet A44-0876-3096 350HP,1785RPM,3PH,60HZ,449TDZ,A44140M,TE Copyright All product information within this document is subject to Baldor Electric Company copyright protection, unless
More informationProduct Information Packet M HP,1425RPM,3PH,50HZ,56,3420M,TEFC,F1
Product Information Packet M3538-50.5HP,1425RPM,3PH,50HZ,56,3420M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationDPS. The SSV Dual Pump System
DPS The SSV Dual Pump System A Full Range of Product Features The DPS series of 36L stainless steel vertical multi-stage pumps from G&L has been designed to provide reliable high pressure boosting to serve
More informationSevere Duty - Three-Phase Motors
GENERAL PURPOSE TEFC Foot Mount...A-83 TEFC C-Face Foot Mount...A-90 TEFC C-Face Footless...A-92 IEEE 841 TEFC Foot Mount...A-94 TEFC C-Face Foot Mount...A-98 TEFC C-Face Footless...A-99 CRUSHER DUTY TEFC
More informationVariable Speed Motor Products
Variable Motor Products Why Baldor? Customer Preference 90% 2000 20% 1985 50% 1990 Percentage of research studies in which Baldor was chosen most preferred. For nearly 100 years, Baldor has strived to
More informationProduct Information Packet M1509T 7.5/3.8HP,1740/860RPM,3PH,60HZ,215T,3754
Product Information Packet M1509T 7.5/3.8HP,1740/860RPM,3PH,60HZ,215T,3754 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationGeneral Purpose - TEFC Motors GP10 / RGZP (Cast Iron Frame)
- TEFC Motors The GP10 and RGZP motors are ideal for both indoor and outdoor applications and in operating atmospheres that contain moisture, dust and grit. These industry workhorses are ideal for use
More informationProduct Information Packet VM HP,3450RPM,3PH,60HZ,56C,3424M,OPEN,F1
Product Information Packet VM3120 1.5HP,3450RPM,3PH,60HZ,56C,3424M,OPEN,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationProduct Information Packet VM HP,1725RPM,3PH,60HZ,56C,3413M,TEFC,F1
Product Information Packet VM3534.33HP,1725RPM,3PH,60HZ,56C,3413M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationSevere Duty / IEEE TEFC Motors SD100 IEEE841 / RGZEESDX
/ IEEE 841 - TEFC Motors Introduction The IEEE 841 motors meets or exceeds IEEE 841-2001 standards for energy efficiency, high performance, variable speed operation, rugged construction and long service
More informationMAX-E1 HIGH EFFICIENCY. Severe Duty
MAX-E1 HIGH EFFICIENCY Severe Duty DESIGN FEATURES & CONSTRUCTION ALL MAX-E1 MOTORS DELIVER THESE IMPRESSIVE DESIGN FEATURES HPE - High Pulse Endurance Wire Non-hygroscopic, Class F insulation system High-grade,
More informationProduct Information Packet EL HP,1750RPM,1PH,60HZ,56,3524LC,ODP,F1
Product Information Packet EL11307.75HP,1750RPM,1PH,60HZ,56,3524LC,ODP,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationSTOCK ELECTRICAL PRODUCTS. SPECIFICATIONS AND PRICING June 2016
STOCK ELECTRICAL PRODUCTS SPECIFICATIONS AND PRICING June 016 STANDARD STEEL FRAME AND CAST IRON MOTORS Our standard Rolled Steel and Cast Iron Frame motors provide superior quality and unique designs
More informationQuick and Easy Voltage Flexibility for NEMA and Metric IEC Motors Motors are re-rated from stock models to 575V in as little as (1) business day
Elektrim 7V s Quick and Easy Voltage Flexibility for NEMA and Metric IEC s s are re-rated from stock models to 7V in as little as () business day Available 7V s: -0 HP NEMA Premium Performance Series s
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Vertical Hollowshaft Electric Motors C O N T E N T S
Revised 04/14/2016 SPECIFICATIONS - DETAILED PROVISIONS Section 16151 - Vertical Hollowshaft Electric Motors C O N T E N T S PART 1 - GENERAL... 1 1.01 SCOPE... 1 1.02 SPECIFIC PROJECT REQUIREMENTS...
More informationTable of Contents 90% 50% 20%
Why Baldor? For over 80 years, Baldor has strived to provide customers with the best value and reliability in industrial electric motors. That dedication shows in customer preference for Baldor motors.
More informationBrake Motors Aluminium Frame Improved Efficiency EFF2
Motors Energy Automation Coatings Brake Motors Aluminium Frame Improved Efficiency EFF2 Standard Features: Three-phase, multivoltage, IP55, TEFC Output: 0.12 up to 11kW Frames: 63 up to 132M Voltage: 220-240/380-415V
More informationProduct Information Packet CEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1
Product Information Packet CEM3665T 5HP,1755RPM,3PH,60HZ,184TC,0642M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationMetric Efficient Line Cast-iron IEC Motors
Metric Efficient Line Cast-iron IEC Motors SPECIFICATION FOR METRIC EFFICIENT LINE CAST-IRON (MELC) IEC MOTORS IN CHILE-ARGENTINA-BOLIVIA Three Phase, IP55 Cast-iron IE2 Metric Motors @ 40 C Ambient Motor
More informationMotors Automation Energy Transmission & Distribution Coatings. g UL Listed. Fire Pump Motor. g I50Hz capablelower. maintenance USA375
Motors Automation Enery Transmission & Distribution Coatins Fire Pump Motor UL Listed I50Hz capablelower maintenance USA375 www.we.net UL Listed Fire Pump Motors ODP Three Phase Foot Mount and Flane Mount
More informationRegenerative Turbine Pumps
Bulletin E4 November 009 E4 T4 Series Regenerative Turbine Pumps Capacities to GPM Heads to 600 Feet Temperatures to 00 F MTH PUMPS MTH E4 T4 Series Close-coupled and pedestal mounted regenerative turbine
More informationEJPM3219T 7.5HP/3500RPM/3PH/OPSB/NEMA 184JP
Product Information Packet EJPM3219T 7.5HP/3500RPM/3PH/OPSB/NEMA 184JP Copyright All product information within this document is subject to Baldor Electric Company copyright protection, unless otherwise
More informationQuantum LMV. Low and Medium Voltage AC Induction Totally Enclosed Fan Cooled Motors. GE Power Conversion
GE Power Conversion Quantum LMV Low and Medium Voltage AC Induction Totally Enclosed Fan Cooled Motors NEMA 500 Frames IEC 315 Frames 200-800 HP 150-600 kw 2-12 Pole Ratings to Fit Your Applications NEMA
More informationProduct Information Packet CEM3587T 2HP,1750RPM,3PH,60HZ,145TC,0527M,TEFC,F1
Product Information Packet CEM3587T 2HP,1750RPM,3PH,60HZ,145TC,0527M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationNORDIC-PREMIUM EFFICIENCY
CANADIAN STANDARDS ASSOCIAT ION EEV NORDIC-PREMIUM EICIENCY CAST IRON PREMIUM EICIENCY ELECTRIC MOTORS VD COMPATIBLE Meets or exceeds NeMA MG-1 table 1-1 premium efficiency corona & spike resistant MAGNet
More informationIDNM3581T 1HP,1745RPM,3PH,60HZ,143TC,0524M,TENV,F1
Product Information Packet IDNM3581T 1HP,1745RPM,3PH,60HZ,143TC,0524M,TENV,F1 Copyright All product information within this document is subject to Baldor Electric Company copyright protection, unless otherwise
More informationProduct Information Packet MM KW,1725RPM,3PH,60HZ,D80,3428M,TEFC,B3
Product Information Packet MM3546.75KW,1725RPM,3PH,60HZ,D80,3428M,TEFC,B3 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More informationProduct Information Packet EM3558T-57 2HP,1445RPM,3PH,50HZ,145T,3528M,TEFC,F1
Product Information Packet EM3558T-57 2HP,1445RPM,3PH,50HZ,145T,3528M,TEFC,F1 Copyright All product information within this document is subject to ABB Motors and Mechanical Inc. copyright protection, unless
More information