SPLASH MOUNTED FAUCETS
|
|
- Whitney Clarke
- 6 years ago
- Views:
Transcription
1 SPLASH MOUNTED FAUCETS 1 Swing Spout 1 Swing Spout 3-1/ Gooseneck Gooseneck K-1 K-11 K-59 K-69 8 Swing Spout 1 Swing Spout 1 Swing Spout (T&S) 1 Swing Spout (T&S) K-101 K-105 K-111 K-11 Pre-Rinse Faucet (T&S) 1 Swing Spout Add-A-Faucet 16 Swing Spout Splash Mount Swivel Gooseneck K-116 K-11 Replacement Spray Head & Handle K-117 K-119 K-11 6 Extended Spout Eye Wash Attachment AC/DC powered Hands-Free Gooseneck Extra Long Faucet AC & Battery Operated! K-13 K-170 Service Faucet Wrist handle Gooseneck Hands-Free Wand Wrist Handles Only K-175 K-11 Pre-Rinse Faucet DTA-53 K-0 K-316 K-316-LU K-00 K-11 Replacement Spray Head & Handle Repair Kit For K-1, K-11, K-101, K-11, K-119 & K-11 Faucet Wall Mounting Bracket Faucet Mounting Kit K-1, K-11, K-101, K-105, K-11, K-119 & K-11 Repair Kit can only be used on faucets purchased after 1/03 K-00 K-30 K-06 Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (97) Fax: (775) G-
2 DIMENSIONS and SPECIFICATIONS TOL ±.15 ALL DIMENSIONS ARE TYPICAL SPLASH MOUNTED FAUCETS Swing Spout Faucet D A Gooseneck Faucet C L D A C C L B B C C L C L C L Standard Faucet conforms to NSF 61 Standard 9. An optional faucet upgrade is required for compliance to AB 1953 Standards. For Replacement Faucets & Upgrades, Drains & Accessories visit our website at K Eye Wash Detail ALL FAUCET AERATORS CONFORM TO ASTM.A M.0 GPM/7.56 LPM THREAD: 55/6-7 FEMALE K-0 SERVICE FAUCET 9.6 GPM/36.3 LPM 3/ HOSE END SPOUT MODEL # Description A LENGTH B HEIGHT C On Center Dimensions K-00 Repair Kit For K-1, K-11, K-101, K-119 & 11 N/A N/A N/A N/A N/A K-06 Faucet Mt. Kit for K-1, K-11, K-101, K-119 & K-11 N/A N/A N/A N/A N/A K-1 1 Swing Spout Faucet 1 5 1/ 1 8 O.C. K-11 1 Swing Spout Faucet 1 5 1/ O.C. K / Gooseneck Faucet 3 1/ O.C. K-69 Heavy Duty Gooseneck Faucet 3 5 3/ 5 1/ O.C. K Swing Spout Faucet 8 1/ 1/ 10 8 O.C. K-105 Heavy Duty 1 Swing Spout Faucet O.C. K-111 Heavy Duty 1 Swing Spout (T&S) Faucet 1 8 1/ 5 1/ 16 1/ 8 O.C. K-11 Heavy Duty 1 Swing Spout Faucet O.C. K-116 Heavy Duty Pre-Rinse (T&S) Faucet / 13 1/ 15 3/8 8 O.C. K-117 Add-A-Faucet with 1 Spout Faucet 1 N/A N/A N/A N/A K Swing Spout Faucet / 8 O.C. K-11 Splash Mount Swivel Gooseneck Faucet 3 1/ 8 5 1/ 5 3/ Single Hole K-13 6 Extended Spout Faucet 6 5 1/ 8 O.C. K-170 Eye Wash Attachment (See Above Detail) N/A N/A N/A N/A N/A K-175 Hands Free AC/DC Operated Faucet 1/ 7 3 3/ 5 1/ Single Hole 6' Cord. INPUT: 100-0VAC 7-6Hz. < 1 Amp Draw. UL LISTED K-11 Heavy Duty Extra Long Spout Faucet 7 3/ O.C. K-0 Service Faucet 6 1/ 1/ 1 3/8 9 8 O.C. K-316 Wrist Handle Gooseneck Faucet 3 1/ O.C. K-00 Hands Free Wand N/A N/A N/A N/A N/A DTA-53 Heavy Duty Pre-Rinse Faucet O.C. D N/A = Not Applicable To Faucet G-a 00 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, JULY 009
3 STAINLESS STEEL HINGED DOOR STYLE ENCLOSED BASE WORK TABLES Flat Top 1 1/ Backsplash 5 Backsplash FEATURES: FLAT TOP is furnished with a 1 5/8 sanitary rolled rim on the front and 1 5/8 square bend edges on the sides and rear. 1 1/ SPLASH is furnished with a 1 5/8 sanitary rolled rim on the front side and 1 5/8 square bend edges on the sides and a 1 1/ splash of single metal thickness on the rear side. 5 SPLASH is furnished with a 1 5/8 sanitary rolled rim on the front side and 1 5/8 square bend edges on the sides and a 5 splash with a 1 return on the rear side. HINGED DOORS are constructed as double panel doors with recessed inner panels for extra rigidity. CONSTRUCTION: All TIG welded. Exposed areas finished to match adjacent surfaces. Entire Top is mechanically polished to a satin finish and is sound deadened. Hat section secured to Top reinforces and maintains level working surface. UNIT-BODY DESIGN sides, back and fixed mid shelf are welded to form a single rigid structure. Gussets welded to support hat sections. MATERIAL: TOP is 1 gauge stainless steel type 30 series with galvanized understructure. BODY is 18 gauge stainless steel type 30 series. LEGS are 1 5/8 diameter tubular stainless steel with stainless steel gussets and 1 adjustable stainless steel bullet feet. Item #: Qty #: Model #: Project #: WIDE # of Length FLAT TOP 1 1/ SPLASH 5 SPLASH Doors Wt HB-SS-3 HB-SS- HB-SS-5 HB-SS-6 HB-SS-7 HB-SS-8 HB-SS-9 HB-SS-10 HB-SS-1 HF-SS-3 HF-SS- HF-SS-5 HF-SS-6 HF-SS-7 HF-SS-8 HF-SS-9 HF-SS-10 HF-SS-1 HK-SS-3 HK-SS- HK-SS-5 HK-SS-6 HK-SS-7 HK-SS-8 HK-SS-9 HK-SS-10 HK-SS-1 30 WIDE # of Length FLAT TOP 1 1/ SPLASH 5 SPLASH Doors Wt HB-SS-303 HB-SS-30 HB-SS-305 HB-SS-306 HB-SS-307 HB-SS-308 HB-SS-309 HB-SS-3010 HB-SS-301 HF-SS-303 HF-SS-30 HF-SS-305 HF-SS-306 HF-SS-307 HF-SS-308 HF-SS-309 HF-SS-3010 HF-SS-301 HK-SS-303 HK-SS-30 HK-SS-305 HK-SS-306 HK-SS-307 HK-SS-308 HK-SS-309 HK-SS-3010 HK-SS WIDE # of Length FLAT TOP 1 1/ SPLASH 5 SPLASH Doors Wt HB-SS-363 HB-SS-36 HB-SS-365 HB-SS-366 HB-SS-367 HB-SS-368 HB-SS-369 HB-SS-3610 HB-SS-361 HF-SS-363 HF-SS-36 HF-SS-365 HF-SS-366 HF-SS-367 HF-SS-368 HF-SS-369 HF-SS-3610 HF-SS-361 HK-SS-363 HK-SS-36 HK-SS-365 HK-SS-366 HK-SS-367 HK-SS-368 HK-SS-369 HK-SS-3610 HK-SS-361 Mid Shelves Are Available. To Add a Fixed Mid Shelf, Add M After each Model Number. Upgrade to Adjustable Mid Shelf. Add TA lbs. 70 lbs. 310 lbs. 355 lbs. 395 lbs. 5 lbs. 95 lbs. 535 lbs. 615 lbs. 60 lbs. 95 lbs. 335 lbs. 375 lbs. 15 lbs. 60 lbs. 505 lbs. 550 lbs. 635 lbs. 90 lbs. 330 lbs. 370 lbs. 15 lbs. 55 lbs. 500 lbs. 555 lbs. 615 lbs. 685 lbs. Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (97) Fax: (775) N-1
4 DETAILS and SPECIFICATIONS TOL ±.500 Units 7 and larger are furnished with 6 legs. ALL DIMENSIONS ARE TYPICAL HB-Series Flat Top HF-Series 1 1/ Rear Splash HK-Series 5 Rear Splash OPTIONAL MID SHELF DETAILS 1 1/" 10 3/" " 13 1/" 35 1/" " 7" N-1a 00 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, AUGUST 009
5 STAINLESS STEEL REGALINE SINKS Two Compartment - Two Drainboards 90 Series shown Item #: Qty #: Model #: Project #: FEATURES: Tile edge for ease of installation. One piece Deep Drawn sink bowls with integral drainboards with splash. Featuring the single bowl unit design. All sink bowls have a large liberal 3 radius. Placement of the welded leg assembly ensures stability and furnishes direct support of the column load requirement for the entire sink unit. 90 series is supplied with front and rear cross brace. CONSTRUCTION: All TIG welded. Welded areas blended to match adjacent surfaces and to a satin finish. Gussets welded to a die-embossed reinforcing channel. Spec-Line: Standard: Super Saver: 90 Series - 11 High Splash. 930 Series - 8 Splash. 900 Series - 8 Splash. MATERIAL: 90 Series: 1 gauge type 30 stainless steel. 930 Series: 16 gauge type 30 stainless steel. 900 Series: 18 gauge type 30 stainless steel. LEGS: 1 5/8 diameter tubular stainless steel. Stainless steel gussets & channels. Stainless Steel 1 adjustable bullet feet. YES! It's SeaM ess! BOWL SIZE 16 x 0 (06 x 508) O.A. LENGTH DRBD. SIZE (inches) (mm) (inches) (mm) SPEC-LINE 90 Series STANDARD 930 Series SUPER SAVER 900 Series 1 Ga. 30 S/S 16 Ga. 30 S/S 18 Ga. 30 S/S 1 Water Level 1 Water Level 1 Water Level Approx. Wt. Approx. Wt. Approx. Wt. Cubic MODEL # (lbs.) MODEL # (lbs.) MODEL # (lbs.) Feet RL RL RL RL RL RL RL RL RL x 0 (508 x 508) RL 9--0-RL RL RL RL RL RL 9--0-RL RL x (57 x 610) RL RL RL RL RL RL RL RL RL x (610 x 610) RL RL RL RL RL RL x 8 (508 x 711) * Regalines with 36 Drainboards are Supplied with Two Sets of Legs for Support RL RL RL RL RL RL RL RL RL 1 Water Level 1 Water Level 1 Water Level 17 Flood Level 15 Flood Level 15 Flood Level Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (97) Fax: (775) C-3
6 DIMENSIONS and SPECIFICATIONS TOL Overall: ±.500 Interior: ±.50 ALL DIMENSIONS ARE TYPICAL B Overall Length A D Drainboard Size Front 90 Series Cross Bracing DESCRIPTION BOWL Overall DRBD Recommended (SIZE) Length (SIZE) Use 16x0 0x0 18x x 0x PLUMBING ROUGH-IN DISH SINKS DISH & POT SINKS POT & PAN SINKS POT SINKS PAN SINKS A B C D V W X Y Z V W X Y Z /8 13 5/8 15 5/8 15 5/8 17 5/8 * Regalines with 36 Drainboards are Supplied with Two Sets of Legs for Support MECHANICAL: Supply is 1/ IPS hot & cold. Faucet holes on 8 centers. Faucets are not included (see accessories). Waste drains are 1 1/ IPS S/S basket type, located in center of sink bowl, and are included. 90 SERIES 900 & 930 SERIES SECTION C-3a 00 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, DECEMBER 006
7 STAINLESS STEEL WALL SHELF WITH CHECK MINDER Item #: Qty #: Model #: Project #: WS-1-36CM WS-1-8CM WS-1-60CM WS-1-7CM WS-1-96CM For Check Minder Provision on any shelf use TA-77. Model Length Wt. 1 x 36 1 x 8 1 x 60 1 x 7 1 x lbs. 19 lbs. 1 lbs. 5 lbs. 3 lbs. FEATURES: Furnished with a 1-1/ sanitary rolled rim with a 1-1/ turn-up at rear. Ends are turned down square. Brackets can be positioned to accomodate wall studs. 96 unit furnished with 3 brackets. Check Minder holds checks with ease. Floating ball mechanism quickly grabs checks and holds them in place. CONSTRUCTION: All TIG welded. Exposed surfaces polished to a satin finish. MATERIAL: 18 gauge type 30 stainless steel. TOL ±.500 DETAILS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL WALL SHELF WITH CHECK MINDER Length 1" 10" ALUMINUM CHECK MINDER FEATURES: Check Minder holds checks with ease. Floating ball mechanism quickly grabs checks and holds them in place. Mounts to existing wall or shelf. MATERIAL: Extruded Anodized aluminum. Model Length Wt. CM- CM-36 CM lbs..5 lbs. 3 lbs. Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (97) Fax: (775) ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, MAY 009 L-6
8 SPLASH MOUNTED FAUCETS 1 Swing Spout 1 Swing Spout 3-1/ Gooseneck Gooseneck K-1 K-11 K-59 K-69 8 Swing Spout 1 Swing Spout 1 Swing Spout (T&S) 1 Swing Spout (T&S) K-101 K-105 K-111 K-11 Pre-Rinse Faucet (T&S) 1 Swing Spout Add-A-Faucet 16 Swing Spout Splash Mount Swivel Gooseneck K-116 K-11 Replacement Spray Head & Handle K-117 K-119 K-11 6 Extended Spout Eye Wash Attachment AC/DC powered Hands-Free Gooseneck Extra Long Faucet AC & Battery Operated! K-13 K-170 Service Faucet Wrist handle Gooseneck Hands-Free Wand Wrist Handles Only K-175 K-11 Pre-Rinse Faucet DTA-53 K-0 K-316 K-316-LU K-00 K-11 Replacement Spray Head & Handle Repair Kit For K-1, K-11, K-101, K-11, K-119 & K-11 Faucet Wall Mounting Bracket Faucet Mounting Kit K-1, K-11, K-101, K-105, K-11, K-119 & K-11 Repair Kit can only be used on faucets purchased after 1/03 K-00 K-30 K-06 Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (97) Fax: (775) G-
9 DIMENSIONS and SPECIFICATIONS TOL ±.15 ALL DIMENSIONS ARE TYPICAL SPLASH MOUNTED FAUCETS Swing Spout Faucet D A Gooseneck Faucet C L D A C C L B B C C L C L C L Standard Faucet conforms to NSF 61 Standard 9. An optional faucet upgrade is required for compliance to AB 1953 Standards. For Replacement Faucets & Upgrades, Drains & Accessories visit our website at K Eye Wash Detail ALL FAUCET AERATORS CONFORM TO ASTM.A M.0 GPM/7.56 LPM THREAD: 55/6-7 FEMALE K-0 SERVICE FAUCET 9.6 GPM/36.3 LPM 3/ HOSE END SPOUT MODEL # Description A LENGTH B HEIGHT C On Center Dimensions K-00 Repair Kit For K-1, K-11, K-101, K-119 & 11 N/A N/A N/A N/A N/A K-06 Faucet Mt. Kit for K-1, K-11, K-101, K-119 & K-11 N/A N/A N/A N/A N/A K-1 1 Swing Spout Faucet 1 5 1/ 1 8 O.C. K-11 1 Swing Spout Faucet 1 5 1/ O.C. K / Gooseneck Faucet 3 1/ O.C. K-69 Heavy Duty Gooseneck Faucet 3 5 3/ 5 1/ O.C. K Swing Spout Faucet 8 1/ 1/ 10 8 O.C. K-105 Heavy Duty 1 Swing Spout Faucet O.C. K-111 Heavy Duty 1 Swing Spout (T&S) Faucet 1 8 1/ 5 1/ 16 1/ 8 O.C. K-11 Heavy Duty 1 Swing Spout Faucet O.C. K-116 Heavy Duty Pre-Rinse (T&S) Faucet / 13 1/ 15 3/8 8 O.C. K-117 Add-A-Faucet with 1 Spout Faucet 1 N/A N/A N/A N/A K Swing Spout Faucet / 8 O.C. K-11 Splash Mount Swivel Gooseneck Faucet 3 1/ 8 5 1/ 5 3/ Single Hole K-13 6 Extended Spout Faucet 6 5 1/ 8 O.C. K-170 Eye Wash Attachment (See Above Detail) N/A N/A N/A N/A N/A K-175 Hands Free AC/DC Operated Faucet 1/ 7 3 3/ 5 1/ Single Hole 6' Cord. INPUT: 100-0VAC 7-6Hz. < 1 Amp Draw. UL LISTED K-11 Heavy Duty Extra Long Spout Faucet 7 3/ O.C. K-0 Service Faucet 6 1/ 1/ 1 3/8 9 8 O.C. K-316 Wrist Handle Gooseneck Faucet 3 1/ O.C. K-00 Hands Free Wand N/A N/A N/A N/A N/A DTA-53 Heavy Duty Pre-Rinse Faucet O.C. D N/A = Not Applicable To Faucet G-a 00 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, JULY 009
10 STAINLESS STEEL HINGED DOOR STYLE ENCLOSED BASE WORK TABLES Flat Top 1 1/ Backsplash 5 Backsplash FEATURES: FLAT TOP is furnished with a 1 5/8 sanitary rolled rim on the front and 1 5/8 square bend edges on the sides and rear. 1 1/ SPLASH is furnished with a 1 5/8 sanitary rolled rim on the front side and 1 5/8 square bend edges on the sides and a 1 1/ splash of single metal thickness on the rear side. 5 SPLASH is furnished with a 1 5/8 sanitary rolled rim on the front side and 1 5/8 square bend edges on the sides and a 5 splash with a 1 return on the rear side. HINGED DOORS are constructed as double panel doors with recessed inner panels for extra rigidity. CONSTRUCTION: All TIG welded. Exposed areas finished to match adjacent surfaces. Entire Top is mechanically polished to a satin finish and is sound deadened. Hat section secured to Top reinforces and maintains level working surface. UNIT-BODY DESIGN sides, back and fixed mid shelf are welded to form a single rigid structure. Gussets welded to support hat sections. MATERIAL: TOP is 1 gauge stainless steel type 30 series with galvanized understructure. BODY is 18 gauge stainless steel type 30 series. LEGS are 1 5/8 diameter tubular stainless steel with stainless steel gussets and 1 adjustable stainless steel bullet feet. Item #: Qty #: Model #: Project #: WIDE # of Length FLAT TOP 1 1/ SPLASH 5 SPLASH Doors Wt HB-SS-3 HB-SS- HB-SS-5 HB-SS-6 HB-SS-7 HB-SS-8 HB-SS-9 HB-SS-10 HB-SS-1 HF-SS-3 HF-SS- HF-SS-5 HF-SS-6 HF-SS-7 HF-SS-8 HF-SS-9 HF-SS-10 HF-SS-1 HK-SS-3 HK-SS- HK-SS-5 HK-SS-6 HK-SS-7 HK-SS-8 HK-SS-9 HK-SS-10 HK-SS-1 30 WIDE # of Length FLAT TOP 1 1/ SPLASH 5 SPLASH Doors Wt HB-SS-303 HB-SS-30 HB-SS-305 HB-SS-306 HB-SS-307 HB-SS-308 HB-SS-309 HB-SS-3010 HB-SS-301 HF-SS-303 HF-SS-30 HF-SS-305 HF-SS-306 HF-SS-307 HF-SS-308 HF-SS-309 HF-SS-3010 HF-SS-301 HK-SS-303 HK-SS-30 HK-SS-305 HK-SS-306 HK-SS-307 HK-SS-308 HK-SS-309 HK-SS-3010 HK-SS WIDE # of Length FLAT TOP 1 1/ SPLASH 5 SPLASH Doors Wt HB-SS-363 HB-SS-36 HB-SS-365 HB-SS-366 HB-SS-367 HB-SS-368 HB-SS-369 HB-SS-3610 HB-SS-361 HF-SS-363 HF-SS-36 HF-SS-365 HF-SS-366 HF-SS-367 HF-SS-368 HF-SS-369 HF-SS-3610 HF-SS-361 HK-SS-363 HK-SS-36 HK-SS-365 HK-SS-366 HK-SS-367 HK-SS-368 HK-SS-369 HK-SS-3610 HK-SS-361 Mid Shelves Are Available. To Add a Fixed Mid Shelf, Add M After each Model Number. Upgrade to Adjustable Mid Shelf. Add TA lbs. 70 lbs. 310 lbs. 355 lbs. 395 lbs. 5 lbs. 95 lbs. 535 lbs. 615 lbs. 60 lbs. 95 lbs. 335 lbs. 375 lbs. 15 lbs. 60 lbs. 505 lbs. 550 lbs. 635 lbs. 90 lbs. 330 lbs. 370 lbs. 15 lbs. 55 lbs. 500 lbs. 555 lbs. 615 lbs. 685 lbs. Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (97) Fax: (775) N-1
11 DETAILS and SPECIFICATIONS TOL ±.500 Units 7 and larger are furnished with 6 legs. ALL DIMENSIONS ARE TYPICAL HB-Series Flat Top HF-Series 1 1/ Rear Splash HK-Series 5 Rear Splash OPTIONAL MID SHELF DETAILS 1 1/" 10 3/" " 13 1/" 35 1/" " 7" N-1a 00 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, AUGUST 009
12 STAINLESS STEEL REGALINE SINKS Two Compartment - Two Drainboards 90 Series shown Item #: Qty #: Model #: Project #: FEATURES: Tile edge for ease of installation. One piece Deep Drawn sink bowls with integral drainboards with splash. Featuring the single bowl unit design. All sink bowls have a large liberal 3 radius. Placement of the welded leg assembly ensures stability and furnishes direct support of the column load requirement for the entire sink unit. 90 series is supplied with front and rear cross brace. CONSTRUCTION: All TIG welded. Welded areas blended to match adjacent surfaces and to a satin finish. Gussets welded to a die-embossed reinforcing channel. Spec-Line: Standard: Super Saver: 90 Series - 11 High Splash. 930 Series - 8 Splash. 900 Series - 8 Splash. MATERIAL: 90 Series: 1 gauge type 30 stainless steel. 930 Series: 16 gauge type 30 stainless steel. 900 Series: 18 gauge type 30 stainless steel. LEGS: 1 5/8 diameter tubular stainless steel. Stainless steel gussets & channels. Stainless Steel 1 adjustable bullet feet. YES! It's SeaM ess! BOWL SIZE 16 x 0 (06 x 508) O.A. LENGTH DRBD. SIZE (inches) (mm) (inches) (mm) SPEC-LINE 90 Series STANDARD 930 Series SUPER SAVER 900 Series 1 Ga. 30 S/S 16 Ga. 30 S/S 18 Ga. 30 S/S 1 Water Level 1 Water Level 1 Water Level Approx. Wt. Approx. Wt. Approx. Wt. Cubic MODEL # (lbs.) MODEL # (lbs.) MODEL # (lbs.) Feet RL RL RL RL RL RL RL RL RL x 0 (508 x 508) RL 9--0-RL RL RL RL RL RL 9--0-RL RL x (57 x 610) RL RL RL RL RL RL RL RL RL x (610 x 610) RL RL RL RL RL RL x 8 (508 x 711) * Regalines with 36 Drainboards are Supplied with Two Sets of Legs for Support RL RL RL RL RL RL RL RL RL 1 Water Level 1 Water Level 1 Water Level 17 Flood Level 15 Flood Level 15 Flood Level Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (97) Fax: (775) C-3
13 DIMENSIONS and SPECIFICATIONS TOL Overall: ±.500 Interior: ±.50 ALL DIMENSIONS ARE TYPICAL B Overall Length A D Drainboard Size Front 90 Series Cross Bracing DESCRIPTION BOWL Overall DRBD Recommended (SIZE) Length (SIZE) Use 16x0 0x0 18x x 0x PLUMBING ROUGH-IN DISH SINKS DISH & POT SINKS POT & PAN SINKS POT SINKS PAN SINKS A B C D V W X Y Z V W X Y Z /8 13 5/8 15 5/8 15 5/8 17 5/8 * Regalines with 36 Drainboards are Supplied with Two Sets of Legs for Support MECHANICAL: Supply is 1/ IPS hot & cold. Faucet holes on 8 centers. Faucets are not included (see accessories). Waste drains are 1 1/ IPS S/S basket type, located in center of sink bowl, and are included. 90 SERIES 900 & 930 SERIES SECTION C-3a 00 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, DECEMBER 006
14 STAINLESS STEEL WALL SHELF WITH CHECK MINDER Item #: Qty #: Model #: Project #: WS-1-36CM WS-1-8CM WS-1-60CM WS-1-7CM WS-1-96CM For Check Minder Provision on any shelf use TA-77. Model Length Wt. 1 x 36 1 x 8 1 x 60 1 x 7 1 x lbs. 19 lbs. 1 lbs. 5 lbs. 3 lbs. FEATURES: Furnished with a 1-1/ sanitary rolled rim with a 1-1/ turn-up at rear. Ends are turned down square. Brackets can be positioned to accomodate wall studs. 96 unit furnished with 3 brackets. Check Minder holds checks with ease. Floating ball mechanism quickly grabs checks and holds them in place. CONSTRUCTION: All TIG welded. Exposed surfaces polished to a satin finish. MATERIAL: 18 gauge type 30 stainless steel. TOL ±.500 DETAILS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL WALL SHELF WITH CHECK MINDER Length 1" 10" ALUMINUM CHECK MINDER FEATURES: Check Minder holds checks with ease. Floating ball mechanism quickly grabs checks and holds them in place. Mounts to existing wall or shelf. MATERIAL: Extruded Anodized aluminum. Model Length Wt. CM- CM-36 CM lbs..5 lbs. 3 lbs. Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (97) Fax: (775) ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, MAY 009 L-6
15 001 East Terra Lane O Fallon, Missouri (636)0-00 Fax (636)7-08 (800) Intl Fax# (001) Parts Dept. (800)-TRUE Parts Dept. Fax# (636) Model: T-35 TRUE FOOD SERVICE EQUIPMENT, INC. T-Series: Reach-In Solid Swing Door Refrigerator Project Name: Location: Item #: Model #: Qty: AIA # SIS # T-35 True s solid door reach-in s are designed with enduring quality that protects your long term investment. Designed using the highest quality materials and components to provide the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today s food service marketplace. Oversized, factory balanced, refrigeration system holds 33 F to 38 F (.5 C to 3.3 C) for the best in food preservation. Stainless steel solid doors and front. The finest stainless available with higher tensile strength for fewer dents and scratches. Adjustable, heavy duty PVC coated shelves. Positive seal self-closing doors. Lifetime guaranteed door hinges and torsion type closure system. Bottom mounted units feature: No stoop lower shelf. Storage on top of cabinet. Compressor performs in coolest, most grease free area of kitchen. Easily accessible condenser coil for cleaning. Rough-In Data Specifications subject to change without notice. Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number). Model Doors Shelves Cabinet Dimensions (inches) (mm) L D H* HP Voltage Amps NEMA Config. Cord Length (total ft.) (total m) T / 91/ 783/8 1/3 115/60/ P /3 30-0/50/ Crated Weight (lbs.) (kg) * Height does not include 5" (17 mm) for castors or 6" (153 mm) for optional legs. Plug type varies by country. Approvals: Available At: Printed in U.S.A.
16 Model: T-35 T-Series: Reach-In Solid Swing Door Refrigerator Standard Features DESIGN True s commitment to using the highest quality materials and oversized refrigeration systems provides the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today s food service marketplace. REFRIGERATION SYSTEM Factory engineered, self-contained, capillary tube system using environmentally friendly (CFC free) 13A refrigerant. Extra large evaporator coil balanced with higher horsepower compressor and large condenser; maintains 33 F to 38 F (.5 C to 3.3 C) for the best in food preservation. Sealed, cast iron, self-lubricating evaporator fan motor(s) and larger fan blades give True reach-in s a more efficient low velocity, high volume airflow design. This unique design ensures faster temperature recovery and shorter run times in the busiest of food service environments. Bottom mounted condensing unit positioned for easy maintenance. Compressor runs in coolest and most grease free area of the kitchen. Allows for storage area on top of unit. CABINET CONSTRUCTION Exterior - Stainless steel front. Anodized quality aluminum ends, back and top. Interior - attractive, NSF approved, white aluminum liner. 300 series stainless steel floor with coved corners. Plan View CUBIC FEET 35/991 * Based on ANSI/AHAM HRF-1-00 Insulation - entire cabinet structure and solid door are foamed-in-place using Ecomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Welded, heavy duty steel frame rail, black powder coated for corrosion protection. Frame rail fitted with " (10 mm) diameter stem castors - locks provided on front set. DOORS Stainless steel exterior with white aluminum liners to match cabinet interior. Doors extend full width of cabinet shell. Door locks standard. Lifetime guaranteed recessed door handles. Each door fitted with 1" (305 mm) long recessed handle that is foamed-in-place with a sheet metal interlock to ensure permanent attachment. Positive seal self-closing doors. Lifetime guaranteed door hinges and torsion type closure system. Magnetic door gasket(s) of one piece construction, removable without tools for ease of cleaning. SHELVING Six (6) adjustable, heavy duty PVC coated wire shelves 17 1/"L x 3/8"D (5 mm x 569 mm). Four () chrome plated shelf clips included per shelf. Shelf support pilasters made of same material as cabinet interior; shelves are adjustable on 1/" (13 mm) increments. LIGHTING Incandescent interior lighting - safety shielded. Lights activated by rocker switch mounted above door(s). MODEL FEATURES Exterior temperature display. Evaporator is epoxy coated to eliminate the potential of corrosion. NSF-7 compliant for open food product. ELECTRICAL Unit completely pre-wired at factory and ready for final connection to a 115/60/1 phase, 15 amp dedicated outlet. Cord and plug set included. OPTIONAL FEATURES/ACCESSORIES Upcharge and lead times may apply. 30-0V / 50 Hz. 6" (153 mm) standard legs. 6" (153 mm) seismic/flanged legs. Additional shelves. Half door bun tray racks. Each holds up to eleven 1"L x 0"D (305 mm x 508 mm) sheet pans (sold separately). Full door bun tray racks. Each holds up to twenty-two 1"L x 0"D (305 mm x 508 mm) sheet pans (sold separately). Remote cabinets (condensing unit supplied by others; system comes standard with 0A expansion valve and requires R0A refrigerant). Consult factory technical service department for BTU information. All remote units must be hard wired during installation. WARRANTY One year warranty on all parts and labor and an additional year warranty on compressor. (U.S.A. only) METRIC DIMENSIONS ROUNDED UP TO THE NEAREST WHOLE MILLIMETER SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE KCL Model Elevation Right Plan 3D Back T-35 TFEY18E TFEY0S TFEY0P TFEY183 TRUE FOOD SERVICE EQUIPMENT 001 East Terra Lane O Fallon, Missouri (636)0-00 Fax (636)7-08 (800) Intl. Fax# (001)
17 R E S T A U R A N T R A N G E S Item # C.S.I. Section 110 ENDURANCE SERIES 8 GAS RESTAURANT RANGE OPEN BURNERS / GRIDDLES G8S-6FT1 G8C-6FT1 G8B-6FT1 G8S-FT G8C-FT G8B-FT G8S-FT36 G8C-FT36 G8B-FT36 STANDARD FEATURES SPECIFICATIONS Model G8S-FT shown with optional casters 8 wide gas restaurant range, Vulcan Model No. G8S-FT. Fully MIG welded aluminized steel frame for added durability. Stainless steel front, sides, backriser, high shelf and 6 adjustable legs. Extra deep crumb tray with welded corners. Four 3,000 BTU/ hr cast burners with lift-off burner heads. Individual pilot for each burner. 7/8 thick x wide manual griddle, 0,000 BTU/hr. Heavy duty cast grates, easy lift-off 1 x 1 1/ in the front and 1 x 1 1/ in the back to better accommodate stock pots or large pans. Grates have a built in aeration bowl for greater efficiency. Burner knobs and oven handle are cool to the touch, high temperature material. One oven: 35,000 BTU/hr standard bakers depth ovens with porcelain oven bottom, sides and door panel, measures 6 1/ d x 6 3/8 w x 1 h. Oven thermostat adjusts from 50 F to 500 F with low setting. Oven is supplied with two racks, two rack guide sets, and four rack positions. Oven door is heavy duty with an integrated door hinge/spring mechanism requiring no adjustment. 1 rear gas connection and pressure regulator. Total input 03,000 BTU/hr. Exterior Dimensions: 35 3/8 d x 8 w x 58 h on 6 adjustable legs Fully MIG welded frame Stainless steel front, sides, backriser, lift-off high shelf 6 Stainless steel adjustable legs 3,000 BTU/hr open top burners with lift-off heads Individual pilot for each burner Heavy duty cast grates, easy lift-off 1 x 1 1/ in front and 1 x 1 1/ in the rear Extra deep pull out crumb tray with welded corners 35,000 BTU/hr baker s depth standard oven cavity. Full size sheet pans fit side-to-side or front-to-back Oven thermostat adjusts from 50 F to 500 F Heavy duty cool touch oven door handle Two oven racks and four rack positions 7/8 thick manual griddle. wide front grease trough 35,000 BTU/hr Snorkler convection oven in place of standard oven 6 d x 6 1/8 w x 13 7/8 h (115v - 1 phase blower motor amp, 6 cord and plug), includes three oven racks One year limited parts and labor warranty OPTIONAL FEATURES (Factory Installed) Rapid clean system - stainless steel clean-out basin, quick disconnect burners, gas shut-off valve Front mounted gas shut-off valve turns off top burner pilots 6 stainless steel stub back Reinforced high shelf for mounting salamander broiler Hot top section in lieu of one open burner Thermostatically controlled griddle (snap-action) ACCESSORIES (Packaged & Sold Separately) Extra oven rack Extra rack guides (set of two) Casters (set of six) Flanged feet (set of six) Reinforced high shelf for mounting salamander broiler a division of ITW Food Equipment Group LLC P.O. Box 696 Louisville, KY 001 Toll-free: Local: Quote & Order Fax: F (0/09)
18 R E S T A U R A N T R A N G E S ENDURANCE SERIES 8 GAS RESTAURANT RANGE OPEN BURNERS / GRIDDLES INSTALLATION INSTRUCTIONS A pressure regulator sized for this unit is included. Natural gas 5.0 W.C., propane gas 10.0 W.C. Gas line connecting to range must be 1 or larger. If flexible connectors are used, the inside diameter must be 1 or larger. An adequate ventilation system is required for commercial cooking equipment. Information may be obtained by writing to the National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 069, When writing, refer to NFPA No. 96. These units are manufactured for installation in accordance with ANSZ3.1A (latest edition), National Fuel Gas Code. Copies may be obtained from The American Gas Association, 00 N Capitol St. NW, Washington, DC 0001, 5. Clearances Rear Sides Combustible 6 10 Standard Oven Non-combustible 0 0 Convection Oven Non-combustible Min For proper combustion, install equipment on adjustable legs or casters provided with unit. For proper combustion, install equipment on adjustable legs or casters provided with unit. NOTE: In line with its policy to continually improve its product, Vulcan reserves the right to change materials and specifications without notice. Specify type of gas when ordering. Specify altitude when above,000 feet. TOP CONFIGURATION MODEL NUMBER DESCRIPTION TOTAL INPUT BTU / HR SHIPPING WEIGHT LBS / KG G8S-6FT1 6 Burners / 1 Griddle / 1 Standard Oven 7, / 3 G8C-6FT1 6 Burners / 1 Griddle / 1 Convection Oven 7, / 350 G8B-6FT1 6 Burners / 1 Griddle / 1 Storage Base 1, / 307 G8S-FT Burners / Griddle / 1 Standard Oven 03, / 37 G8C-FT Burners / Griddle / 1 Convection Oven 03, / 355 G8B-FT Burners / Griddle / 1 Storage Base 168, / 311 G8S-FT36 Burners / 36 Griddle / 1 Standard Oven 159, / 31 G8C-FT36 Burners / 36 Griddle / 1 Convection Oven 159, / 368 G8B-FT36 Burners / 36 Griddle / 1 Storage Base 1, / 35 This appliance is manufactured for commercial use only and is not intended for home use. a division of ITW Food Equipment Group LLC P.O. Box 696 Louisville, KY 001 Toll-free: Local: Quote & Order Fax: F (0/09)
19 001 East Terra Lane O Fallon, Missouri (636)0-00 Fax (636)7-08 (800) Intl Fax# (001) Parts Dept. (800)-TRUE Parts Dept. Fax# (636) Model: T-35 TRUE FOOD SERVICE EQUIPMENT, INC. T-Series: Reach-In Solid Swing Door Refrigerator Project Name: Location: Item #: Model #: Qty: AIA # SIS # T-35 True s solid door reach-in s are designed with enduring quality that protects your long term investment. Designed using the highest quality materials and components to provide the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today s food service marketplace. Oversized, factory balanced, refrigeration system holds 33 F to 38 F (.5 C to 3.3 C) for the best in food preservation. Stainless steel solid doors and front. The finest stainless available with higher tensile strength for fewer dents and scratches. Adjustable, heavy duty PVC coated shelves. Positive seal self-closing doors. Lifetime guaranteed door hinges and torsion type closure system. Bottom mounted units feature: No stoop lower shelf. Storage on top of cabinet. Compressor performs in coolest, most grease free area of kitchen. Easily accessible condenser coil for cleaning. Rough-In Data Specifications subject to change without notice. Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number). Model Doors Shelves Cabinet Dimensions (inches) (mm) L D H* HP Voltage Amps NEMA Config. Cord Length (total ft.) (total m) T / 91/ 783/8 1/3 115/60/ P /3 30-0/50/ Crated Weight (lbs.) (kg) * Height does not include 5" (17 mm) for castors or 6" (153 mm) for optional legs. Plug type varies by country. Approvals: Available At: Printed in U.S.A.
20 Model: T-35 T-Series: Reach-In Solid Swing Door Refrigerator Standard Features DESIGN True s commitment to using the highest quality materials and oversized refrigeration systems provides the user with colder product temperatures, lower utility costs, exceptional food safety and the best value in today s food service marketplace. REFRIGERATION SYSTEM Factory engineered, self-contained, capillary tube system using environmentally friendly (CFC free) 13A refrigerant. Extra large evaporator coil balanced with higher horsepower compressor and large condenser; maintains 33 F to 38 F (.5 C to 3.3 C) for the best in food preservation. Sealed, cast iron, self-lubricating evaporator fan motor(s) and larger fan blades give True reach-in s a more efficient low velocity, high volume airflow design. This unique design ensures faster temperature recovery and shorter run times in the busiest of food service environments. Bottom mounted condensing unit positioned for easy maintenance. Compressor runs in coolest and most grease free area of the kitchen. Allows for storage area on top of unit. CABINET CONSTRUCTION Exterior - Stainless steel front. Anodized quality aluminum ends, back and top. Interior - attractive, NSF approved, white aluminum liner. 300 series stainless steel floor with coved corners. Plan View CUBIC FEET 35/991 * Based on ANSI/AHAM HRF-1-00 Insulation - entire cabinet structure and solid door are foamed-in-place using Ecomate. A high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Welded, heavy duty steel frame rail, black powder coated for corrosion protection. Frame rail fitted with " (10 mm) diameter stem castors - locks provided on front set. DOORS Stainless steel exterior with white aluminum liners to match cabinet interior. Doors extend full width of cabinet shell. Door locks standard. Lifetime guaranteed recessed door handles. Each door fitted with 1" (305 mm) long recessed handle that is foamed-in-place with a sheet metal interlock to ensure permanent attachment. Positive seal self-closing doors. Lifetime guaranteed door hinges and torsion type closure system. Magnetic door gasket(s) of one piece construction, removable without tools for ease of cleaning. SHELVING Six (6) adjustable, heavy duty PVC coated wire shelves 17 1/"L x 3/8"D (5 mm x 569 mm). Four () chrome plated shelf clips included per shelf. Shelf support pilasters made of same material as cabinet interior; shelves are adjustable on 1/" (13 mm) increments. LIGHTING Incandescent interior lighting - safety shielded. Lights activated by rocker switch mounted above door(s). MODEL FEATURES Exterior temperature display. Evaporator is epoxy coated to eliminate the potential of corrosion. NSF-7 compliant for open food product. ELECTRICAL Unit completely pre-wired at factory and ready for final connection to a 115/60/1 phase, 15 amp dedicated outlet. Cord and plug set included. OPTIONAL FEATURES/ACCESSORIES Upcharge and lead times may apply. 30-0V / 50 Hz. 6" (153 mm) standard legs. 6" (153 mm) seismic/flanged legs. Additional shelves. Half door bun tray racks. Each holds up to eleven 1"L x 0"D (305 mm x 508 mm) sheet pans (sold separately). Full door bun tray racks. Each holds up to twenty-two 1"L x 0"D (305 mm x 508 mm) sheet pans (sold separately). Remote cabinets (condensing unit supplied by others; system comes standard with 0A expansion valve and requires R0A refrigerant). Consult factory technical service department for BTU information. All remote units must be hard wired during installation. WARRANTY One year warranty on all parts and labor and an additional year warranty on compressor. (U.S.A. only) METRIC DIMENSIONS ROUNDED UP TO THE NEAREST WHOLE MILLIMETER SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE KCL Model Elevation Right Plan 3D Back T-35 TFEY18E TFEY0S TFEY0P TFEY183 TRUE FOOD SERVICE EQUIPMENT 001 East Terra Lane O Fallon, Missouri (636)0-00 Fax (636)7-08 (800) Intl. Fax# (001)
21 R E S T A U R A N T R A N G E S Item # C.S.I. Section 110 ENDURANCE SERIES 8 GAS RESTAURANT RANGE OPEN BURNERS / GRIDDLES G8S-6FT1 G8C-6FT1 G8B-6FT1 G8S-FT G8C-FT G8B-FT G8S-FT36 G8C-FT36 G8B-FT36 STANDARD FEATURES SPECIFICATIONS Model G8S-FT shown with optional casters 8 wide gas restaurant range, Vulcan Model No. G8S-FT. Fully MIG welded aluminized steel frame for added durability. Stainless steel front, sides, backriser, high shelf and 6 adjustable legs. Extra deep crumb tray with welded corners. Four 3,000 BTU/ hr cast burners with lift-off burner heads. Individual pilot for each burner. 7/8 thick x wide manual griddle, 0,000 BTU/hr. Heavy duty cast grates, easy lift-off 1 x 1 1/ in the front and 1 x 1 1/ in the back to better accommodate stock pots or large pans. Grates have a built in aeration bowl for greater efficiency. Burner knobs and oven handle are cool to the touch, high temperature material. One oven: 35,000 BTU/hr standard bakers depth ovens with porcelain oven bottom, sides and door panel, measures 6 1/ d x 6 3/8 w x 1 h. Oven thermostat adjusts from 50 F to 500 F with low setting. Oven is supplied with two racks, two rack guide sets, and four rack positions. Oven door is heavy duty with an integrated door hinge/spring mechanism requiring no adjustment. 1 rear gas connection and pressure regulator. Total input 03,000 BTU/hr. Exterior Dimensions: 35 3/8 d x 8 w x 58 h on 6 adjustable legs Fully MIG welded frame Stainless steel front, sides, backriser, lift-off high shelf 6 Stainless steel adjustable legs 3,000 BTU/hr open top burners with lift-off heads Individual pilot for each burner Heavy duty cast grates, easy lift-off 1 x 1 1/ in front and 1 x 1 1/ in the rear Extra deep pull out crumb tray with welded corners 35,000 BTU/hr baker s depth standard oven cavity. Full size sheet pans fit side-to-side or front-to-back Oven thermostat adjusts from 50 F to 500 F Heavy duty cool touch oven door handle Two oven racks and four rack positions 7/8 thick manual griddle. wide front grease trough 35,000 BTU/hr Snorkler convection oven in place of standard oven 6 d x 6 1/8 w x 13 7/8 h (115v - 1 phase blower motor amp, 6 cord and plug), includes three oven racks One year limited parts and labor warranty OPTIONAL FEATURES (Factory Installed) Rapid clean system - stainless steel clean-out basin, quick disconnect burners, gas shut-off valve Front mounted gas shut-off valve turns off top burner pilots 6 stainless steel stub back Reinforced high shelf for mounting salamander broiler Hot top section in lieu of one open burner Thermostatically controlled griddle (snap-action) ACCESSORIES (Packaged & Sold Separately) Extra oven rack Extra rack guides (set of two) Casters (set of six) Flanged feet (set of six) Reinforced high shelf for mounting salamander broiler a division of ITW Food Equipment Group LLC P.O. Box 696 Louisville, KY 001 Toll-free: Local: Quote & Order Fax: F (0/09)
22 R E S T A U R A N T R A N G E S ENDURANCE SERIES 8 GAS RESTAURANT RANGE OPEN BURNERS / GRIDDLES INSTALLATION INSTRUCTIONS A pressure regulator sized for this unit is included. Natural gas 5.0 W.C., propane gas 10.0 W.C. Gas line connecting to range must be 1 or larger. If flexible connectors are used, the inside diameter must be 1 or larger. An adequate ventilation system is required for commercial cooking equipment. Information may be obtained by writing to the National Fire Protection Association, 1 Batterymarch Park, Quincy, MA 069, When writing, refer to NFPA No. 96. These units are manufactured for installation in accordance with ANSZ3.1A (latest edition), National Fuel Gas Code. Copies may be obtained from The American Gas Association, 00 N Capitol St. NW, Washington, DC 0001, 5. Clearances Rear Sides Combustible 6 10 Standard Oven Non-combustible 0 0 Convection Oven Non-combustible Min For proper combustion, install equipment on adjustable legs or casters provided with unit. For proper combustion, install equipment on adjustable legs or casters provided with unit. NOTE: In line with its policy to continually improve its product, Vulcan reserves the right to change materials and specifications without notice. Specify type of gas when ordering. Specify altitude when above,000 feet. TOP CONFIGURATION MODEL NUMBER DESCRIPTION TOTAL INPUT BTU / HR SHIPPING WEIGHT LBS / KG G8S-6FT1 6 Burners / 1 Griddle / 1 Standard Oven 7, / 3 G8C-6FT1 6 Burners / 1 Griddle / 1 Convection Oven 7, / 350 G8B-6FT1 6 Burners / 1 Griddle / 1 Storage Base 1, / 307 G8S-FT Burners / Griddle / 1 Standard Oven 03, / 37 G8C-FT Burners / Griddle / 1 Convection Oven 03, / 355 G8B-FT Burners / Griddle / 1 Storage Base 168, / 311 G8S-FT36 Burners / 36 Griddle / 1 Standard Oven 159, / 31 G8C-FT36 Burners / 36 Griddle / 1 Convection Oven 159, / 368 G8B-FT36 Burners / 36 Griddle / 1 Storage Base 1, / 35 This appliance is manufactured for commercial use only and is not intended for home use. a division of ITW Food Equipment Group LLC P.O. Box 696 Louisville, KY 001 Toll-free: Local: Quote & Order Fax: F (0/09)
STAINLESS STEEL 16 GAUGE A.D.A. MULTI-STATION HAND SINKS W/TUBULAR SUPPORTS or LEGS. FC-WM-40EFADA Shown. OPERATED # of
STAINLESS STEEL GAUGE A.D.A. MULTI-STATION HAND SINKS W/TUBULAR SUPPORTS or LEGS NSF APPROVED Item #: Qty #: Model #: Project #: Manual Operated (Faucet Not Included) FC-WM-40-ADA Shown FC-WM-40EFADA Shown
More informationItem #: Qty #: Model #: Project #:
GARMENT RACKS FLOOR MOUNTED Length MODEL # Weight 4 5 6 8 FGR-4 FGR-5 FGR-6 FGR-8 39 lbs. 48 lbs. 58 lbs. 77 lbs. Floor Mounted FGR WALL MOUNTED Length MODEL # Weight 4 5 6 8 WGR-4 WGR-5 WGR-6 WGR-8 35
More informationItem #: Qty #: Model #: Project #:
STAINLESS STEEL SQUARE CORNER MULTI-STATION HAND SINKS Item #: Qty #: Model #: Project #: Electronic Faucet Manual Operated (Faucet Not Included) 9-8-40EF Shown 9-8-40 Shown Knee Valve Toe-Push Valve 9-8-40KV
More informationPLUMBING CATALOG COMMERCIAL SINKS, FAUCETS & ACCESSORIES JANUARY 2016 SMART FABRICATION
SMART FABRICATION PLUMBING CATALOG JANUARY 2016 COMMERCIAL SINKS, FAUCETS & ACCESSORIES Punch 1 1/8" Holes For A Faucet Supplied By Others LC 8" LC 35 1 8 " LC 8" LC 15 3 8 " 8 1 2 " 14" LC 6 1 2 " 33
More informationHEAVY DUTY RANGES GRIDDLE TOP
GRIDDLE TOP Model Numbers IHR-G36 IHR-GT36 IHR-G36-C IHR-GT36-C IHR-G36-XB IHR-GT36-XB IHR-G36-M IHR-GT36-M 1" (25 mm) thick steel polished griddle plate. M shaped burner for even heating throughout the
More informationSTAINLESS STEEL 16 GAUGE MULTI-STATION HAND SINKS W/ TUBULAR SUPPORTS or LEGS. Electronic Faucet. FC-WM-40KV Shown
STAINESS STEE GAUGE MUTI-STATION HAND SINKS W/ TUBUAR SUPPORTS or EGS NSF APPROVED Item #: Qty #: Model #: Project #: Electronic Faucet Manual Operated (Faucet Not Included) F-WM-40EF Shown Toe-Push F-WM-40FV
More informationDelfield Undercounters/Worktops
NSF and UL certified DOE 2017, Energy Star and EPA SNAP compliant Built in Covington, TN Covington Facility = ~200K Sq. Ft. 2 EnergyStar (EPA) Voluntary compliance Energy usage guidelines Effective October
More informationSupport Equipment. In This Section Mobile Ingredient Bins H Kettle Drainer H Rack/Tray Carts H
H SUPPORT EQUIPMENT Support Equipment In This Section Mobile Ingredient Bins H-1...198 Kettle Drainer H-2...199 Rack/Tray Carts H-3...200 Tray, Cup or Glass Rack Carts H-3-B...201 Cup & Glass Rack Carts
More informationStocking & Marking Carts Model SC-1848/6W/6N Model 110
2010 Stocking & Marking Carts Model SC-1848/6W/6N Model 110 All welded green powder coated square tute steel. Maneuvers easily on(4) All welded powder coated (green) steel square polyurethane end casters
More information02/19/2018. Project: VB Southwest Elem
02/19/2018 Project: VB 0197.3 Southwest Elem From: To: Table of Contents MILK COOLER BEVERAGE AIR SM49N S (ITEM 01) 1 SERVING COUNTER, HOT FOOD, ELECTRIC DUKE MANUFACTURING E305 25SS (ITEM 2 02) SNEEZE
More informationE CONOMIC S TIMULUS PACKAGE
E CONOMIC S TIMULUS PACKAGE U-Boat Utility Carts Ultra U-Boat Diamond Steel Deck Constructed of all welded steel with anti-skid diamond plate steel deck. High density polyethylene molded full wraparound
More informationALL ITEMS IN STOCK FOR IMMEDIATE SHIPMENT
ALL ITEMS IN STOCK FOR IMMEDIATE SHIPMENT E CONOMIC S TIMULUS PACKAGE Call for Pricing! Adjustable Aluminum Tubular Shelving Constructed of all welded, heavy duty, tubular 1 3/4 x 1 1/2 tubes for improved
More informationProduct Catalog. High Quality Stainless Steel products
Product Catalog High Quality Stainless Steel products Thorinox is a Canadian company specialized in the sale of high quality stainless steel products, such as storage cabinets, work tables of all sizes,
More informationPLUMBING PRICE LIST EXPIRES 9/30/13. Stay Connected! KrowneMetal CELEBRATING OUR 66 TH YEAR IN BUSINESS!
PLUMBING PRICE LIST EXPIRES 9/30/13 Stay Connected! www.krowne.com KrowneMetal CELEBRATING OUR 66 TH YEAR IN BUSINESS! Pre-Rinses All Pre-Rinses are pre-assembled at the factory to substantially cut installation
More informationEnclosed Mobile Cabinet
Heater Proofer Economy Model NHPL-1836-ECO Non-Insulated heater proofer. Air baffle and circulating air blower provide even heat distribution. Clear Lexan Door. Easy dual proof/heat control: Proof mode:
More informationNew! Alcom Distributing 2125 First Avenue S PO Box 2771 Fargo, ND (701) Product Catalog 10/09-3/4
New! Distributed by: Alcom Distributing 2125 First Avenue S PO Box 2771 Fargo, ND 58108-2771 (701) 739-4479 sales@alcomdist.com Refrigeration... Page 2 Gas Equipment... Page 3 Sinks... Page 4 Work Tables...
More informationPRODUCT & PRICE GUIDE 2014
PRODUCT & PRICE GUIDE 2014 www.aeromfg.com CUSTOMIZE IT STAINLESS STEEL CUSTOM FABRICATION Aero s stainless steel custom fabrication department will collaborate with your architect, engineer or consultant
More informationPG-35AV-CH Coiled Hose and Spray Valve. PG-8WSAV-08 Lighweight Aluminum Spray Unit
A Pet-Care Pre-Rinse Plumbing Units Products RINSE UNITS T&S Quality Pet-Care Plumbing Products Wash and Rinse Products Replacement Parts Model # Description EB-10K Repair Kit 013539-45 Replacement Hose
More informationRefrigerators/Freezers
Explosion-Proof, Corrosion-Resistant Refrigerator Flammable Material Storage Refrigerator/Freezer Laboratory Freezer Lab-Line offers a complete line of refrigerators and freezers to accommodate virtually
More informationIn This Section Portable Hot Box Aluminum For Transport J ER-18 Enclosed Rack For Display J
J Cabinets In This Section Portable Hot Box J-1...237 ER-18 Enclosed Rack For Display J-2...239 Econoline Cabinets Aluminum For Storage J-3...241 Transport Cabinets J-4...243 Stackable Cabinets J-5...245
More informationFood Preparation Tables
Food Preparation Tables TSSU, TPP & TFP English Contents 2 About True 4 Sandwich/Salad Tables 10 Pizza Prep Tables 14 Food Prep Tables The industry s most complete refrigeration source. True. True is
More informationTOP CONFIGURATIONS Gas Ranges R366 R364C R364G
WOLF AS RANS WOLF AS RANS If it looks as if it could be in a restaurant kitchen, well, that s natural. That s precisely where Wolf has spent the past seven decades, perfecting the form, function and sheer
More informationIR 2000 Series Medium Duty Range w/standard Oven ITEM NO DESCRIPTION PART # 24" 36" 48" 60" 72" Griddle Plate Assembly 24"
1 Griddle Plate Assembly 12" 20006 1 1 1 1 1 Griddle Plate Assembly 24" 20007 1 1 1 1 1 Griddle Plate Assembly 36" 20008 1 1 1 1 Griddle Plate Assembly 48" 20009 1 1 1 Griddle Plate Assembly 60" 20010
More informationDEALER NET FOB NORWALK, CA
15613 S. BLACKBURN AVE. NORWALK, CA. 90650 562-229-0404 PHONE 562-229-0999 FAX June 2016 DEALER NET FOB NORWALK, CA Counter equipment now has a 2 year Parts & Labor Warranty Selected 60 inch ranges now
More informationSECTION METAL ATHLETIC SPORT LOCKERS
SECTION 10 50 13 - METAL ATHLETIC SPORT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
More informationNEW Insulated Heater Proofer
NEW Under Counter Heater Proofer Heater Proofers All Models Air baffle and circulating air blower provide even heat distribution. Clear Lexan Door. Easy dual proof/heat control: Proof mode: Humidity from
More informationWOLF DUAL FUEL RANGES
Dual Fuel Ranges With Wolf s dual fuel ranges you have state-ofthe-art cooking expertise in any number of sizes to meet the discriminating consumers precise needs. Patented features ensure this range stands
More informationExam Room Group (shown) 8010 (reversed) W: 43", 46", 49" H : Wall: 30", Desk: 30" D : Wall: 14.25", Desk: 24.25" Cabinet group consists of:
Exam Room Group Exam Room Group 8008 W: 29" - 50" (3" increments) H : Wall: 8", Desk: 30" D : Wall: 13.25", Desk: 24.25" #3020 wall mounted book shelf (27" - 48" W) #1500-4.5" knee space drawer (27" -
More informationPRODUCT FLYER PRODUCT FLYER
LEADING NATIONAL FABRICATOR food service PRODUCT FLYER PRODUCT FLYER PRICES VALID THRU JANUARY 31, 2018 ALL PRICES ARE. PRICES ARE SUBJECT TO CHANGE. Don t Forget To Look For SVU VALUE UNITS Formerly Advance
More informationToll Free Phone, (US & Canada): (800) Toll Free Fax, (US & Canada): (800)
PII PERFORMER SERIES Toll Free Phone, (US & Canada): (800) 427-6668 Toll Free Fax, (US & Canada): (800) 361-7745 http://www.garland-group.com FORM # PII Performer Series Parts (Rev 02) Page 2 FORM # PII
More informationIHR Series With Standard Oven ITEM NO DESCRIPTION PART # 36" 1 Top Grate Cast Iron 12" X 28" - (Old Style) 1187 N/A *** 12" Top Grate 12 x 13 1/4
1 Top Grate Cast Iron 12" X 28" - (Old Style) 1187 N/A *** 12" Top Grate 12 x 13 1/4 (Front) Open Burner 35334 3 *** 12" Top Grate 12 x 13 1/4 (Rear) Open Burner 35335 3 2 Top Grate Cast Iron 18" X 28"
More informationPS PERFORMER SERIES Effective March 2003
PS PERFORMER SERIES Effective March 2003 Toll Free Phone, (US & Canada): (800) 427-6668 Toll Free Fax, (US & Canada): (800) 36-7745 http://www.garland-group.com FORM # PS Performer (Rev 7) Model Number
More informationSPECIFICATIONS DOUGLAS MODEL LD-20 POT, PAN, AND UTENSIL WASHER
B05D PAN WASHER B05D PAN WASHER xxxxxx Effective: March 1, 2005 SPECIFICATIONS DOUGLAS MODEL LD-20 POT, PAN, AND UTENSIL WASHER CABINET 50 wide x 36 deep x 73 high Clearance Height: 100-3/4 (103-1/2 with
More informationFogel USA 831 Easy Cayuga St Philadelphia, PA Fax:
White interior and exterior Heavy duty gravity fin coil with expansion valve installed 2 High/low gravity evaporator for maximum Foamed-in-place polyurethane insulation Double shelf brackets for shelf
More information36/60/160/260 L Series Gas Ranges
VULCAN L Series Gas Ranges 36/60/160/260 L Series Gas Ranges 34 THRU 41 1 5 51 52 26 42 THRU 49 55-56-57 2-3-4 33 31-32 25 29-30 27 15 PL-53065 14 13 12 28 24 23 22 21 20 19 18 16 17 52 11 10 9 8 7 6 632
More informationDirect Gas-Fired Heating
Direct Gas-Fired Heating Model DG 800 to 15,000 cfm Up to 1,600,000 BTU/hr Optional Evaporative Cooling January 2005 PRODUCT FEATURES Model DG Direct Gas-Fired Make-Up Air Unit The Greenheck model DG is
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS V Series HDR Gas Ranges TOPS Open Top Hot Top Griddle Top Work Surface BASES Standard Oven Convection Oven Cabinet Base *Add B for Cabinet Base. *Add S for Standard Oven Base
More informationINNOVATIVE DESIGNS FOR YOUR FOODSERVICE NEEDS SANDWICH UNITS STANDARD TOPS, MIGHTY TOPS & CUTTING TOPS
INNOVATIVE DESIGNS FOR YOUR FOODSERVICE NEEDS SANDWICH UNITS STANDARD TOPS, MIGHTY TOPS & CUTTING TOPS Continental Refrigerator has been an ENERGY STAR Partner since 2001 The Best Choice for a Hot Kitchen!
More informationTotal Sell: $ ea Elkay SSP. Klinger's Trading
Item # 2: EQUIPMENT STAND, FOR COUNTERTOP COOKIN Item # 3: WORK TABLE, 60", STAINLESS STEEL TOP ES30X36-STG Total Sell: $329.00 ea SG 3060 Total Sell: $160.00 ea Elkay SSP Standard Equipment Stand, with
More informationGas Convection Ovens UP TO
Gas Convection Ovens models SDG-, SDG-2 UP TO (serial#) 2052300xxxxx (date) 3-May-2 Phone (US & Canada): 800 427 6668 Fax (US & Canada): 800 36 7745 www.garland-group.com U_GO_PL_SUNFIRE_SDGSDG2 (Rev 8)
More informationLaboratory Carts & Benches
Laboratory Carts & Benches Labconco Laboratory Carts and Benches fit in every lab. These versatile carts have endless uses from transporting equipment and supplies to providing auxiliary bench space. Labconco
More informationCornuFé Series PRICES & SPECIFICATIONS
CornuFé Series PRICES & SPECIFICATIONS centenary collection January 2010 CornuFé Series Stoves & Cooktops cornufé 110: c1 43" 45.7" 43 W x 25.6 D x 35.8 (36.9 max) H (inches) 1092 W x 650 D x 910 (937
More informationMarathoner Gold and SilverStar. Electric Convection Ovens
SOUTHBEND Marathoner Gold and SilverStar Electric Convection Ovens Electric Convection Ovens Door Parts 1 1177102 Handle, Coated, 15" 2 1164527 Bushing, Bronze, Lower Oilite (4 qty.) 3 1092000 Oilite Thrust
More informationERD/ERC SERIES ELECTRIC FRYERS
CATALOG OF REPLACEMENT PARTS ERD/ERC SERIES ELECTRIC FRYERS ERD40 ERD50 ERD225 ERD85 ERC40 ERC50 ERC225 ERC85 ML-114614 ML-114615 ML-114616 ML-114617 ML-114618 ML-114619 ML-114620 ML-114621 MODELS MANUFACTURED
More informationKey Differences Raising The Bar! with Perlick
Key Differences with Perlick Raising The Bar! Back Bar Refrigeration Key Features End Wall Compressor & Evaporator increases storage capacity 14% Integrated Locks Mullion Heater Deeper Wine Drawer option
More informationANATOMY DISSECTION TABLES
ANATOMY DISSECTION TABLES SECTION 8 ANATOMY DISSECTION TABLES Standard Dissection Platform... 2 Economy Dissection Platform... 3 Dissection Table w/ Hood... 4-5 Height Adjustable Dissection Table w/ Hood...
More informationSUPER DUTY THE AFFORDABLE SOLUTION 8685 Station Street, P.O. Box 90, Mentor, OH 44061-0090 USA P: +1-440-255-9333 F: +1-440-255-6427 E: solutions@lintern.com www.lintern.com SUPER DUTY CONDENSER TOTAL
More informationProtector. Storage Cabinets, Base Stands & Fume Hood Accessories
Protector Storage Cabinets, Base Stands & Fume Hood Accessories Storage Cabinets & Base Stands Selection Guide Complete your installation of a Labconco fume hood or enclosure with a Labconco base cabinet
More informationKVR Capture Jet. KVR- Capture Jet Round Island Hood with Perimeter Jets. Round Island Hood with Perimeter Jets
KVR Capture Jet Round Island Hood with Perimeter Jets The KVR Round Island Capture Jet hood with perimeter jets is a highly efficient kitchen ventilation hood that removes contaminated air and excess heat
More informationProduct Specifications Sheets
Product Specifications Sheets 35 Series Service Case Double Duty - Deli Pass-Thru Model Power Est. Ship Model No. Description Length Depth Height Voltage Amps HP/BTUs Cord Weight SC-CDS35-4 Self-contained
More informationDisplay Cases 5000 Series
Display Cases 5000 Series Product Specification Sheets Construction Standard Features White interior and exterior Heavy duty gravity fin coil with expansion valve installed 2 High /low gravity evaporator
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 Gas Convection Steamers C24GA6 ML-136056 C24GA10 ML-136057 C24GA6 ML-136021 C24GA10 ML-136022 VULCAN-HART DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC 3600 NORTH
More informationJust six inches bigger than the Model 661, the Model
Side-by-Side Refrigerator / Freezer Front venting allows unit to be completely built in Hermetically sealed refrigeration units Serial and model number plate Lighted electronic control panel Adjustable
More informationWENDY S COMBO RANGE. model STW286A
WENDY S COMBO RANGE model STW286A Toll Free Phone, (US & Canada): (800) 427-6668 Toll Free Fax, (US & Canada): (800) 361-7745 http://www.garland-group.com G_GHD_PL_CHAINRANGE_WENDYSSTW286A (Rev 12) WENDY
More informationThis is the smallest combination refrigerator / freezer
Over-and-Under Refrigerator / Freezer Front venting allows unit to be completely built in Hermetically sealed refrigeration units Lighted electronic control panel Serial and model number plate Adjustable
More informationFiltered Kitchen Supply Packaged Ventilator
Filtered Kitchen Supply Packaged Ventilator Page Introduction........................................... 2 Information............................................ 3 Specifications and Dimension Data KD................................................
More informationSECTION LABORATORY FITTINGS
SECTION 11605 LABORATORY FITTINGS PART 1 GENERAL 1.1 SECTION INCLUDES A. Stainless steel laboratory pegboard drying racks. B. Stainless steel counters and sink bowls. C. Stainless steel shelving. D. Stainless
More informationSECTION AXIAL HVAC FANS
SECTION 233413 - AXIAL HVAC FANS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationIf you like the strong vertical lines of side-by-side
Side-by-Side Refrigerator Freezer Front venting allows unit to be completely built in Hermetically sealed refrigeration units Serial and model number plate Lighted electronic control panel Adjustable wire
More informationS680 SENTRY SERIES ELECTRIC RESTAURANT RANGES/BROILERS S/SS/SU - 684, S/SS/SU S/SS/SU - 684RC, S/SS/SU - 686RC SERC, SUERC, SER-680, SUER-680
S680 SENTRY SERIES ELECTRIC RESTAURANT RANGES/BROILERS models S/SS/SU - 684, S/SS/SU - 686 S/SS/SU - 684RC, S/SS/SU - 686RC SERC, SUERC, SER-680, SUER-680 Toll Free Phone (US & Canada): (800) 427-6668
More informationSECTION HVAC POWER VENTILATORS
SECTION 233423 HVAC POWER VENTILATORS 1. PART 1 GENERAL 1.1. RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationKVL-P with Plate Shelf
The model of Capture Jet TM hood is a highly efficient kitchen ventilation hood that removes contaminated air and excess heat emitted by cooking equipment, helping to provide a comfortable and clean environment.
More informationINNOVATIVE DESIGNS FOR YOUR FOODSERVICE NEEDS. REACH-INS & PASS-THRUS Refrigerators & Freezers
INNOVATIVE DESIGNS FOR YOUR FOODSERVICE NEEDS REACH-INS & PASS-THRUS Refrigerators & Freezers Continental Refrigerator has been an ENERGY STAR Partner since 2001 INNOVATIVE DESIGNS FOR YOUR FOODSERVICE
More informationS680 SENTRY SERIES ELECTRIC RESTAURANT RANGES/BROILERS S/SS/SU - 684, S/SS/SU S/SS/SU - 684RC, S/SS/SU - 686RC SERC, SUERC, SER-680, SUER-680
S680 SENTRY SERIES ELECTRIC RESTAURANT RANGES/BROILERS models S/SS/SU - 684, S/SS/SU - 686 S/SS/SU - 684RC, S/SS/SU - 686RC SERC, SUERC, SER-680, SUER-680 Toll Free Phone (US & Canada): (800) 427-6668
More informationADJUSTABLE FOOT INSERTS FOR ROUND TUBING
ADJUSTABLE FOOT INSERTS FOR ROUND TUBING J D E F A B C G H I K INSERTS FOR 1-5/8 IN. (40MM) O. D. 16 GA. ROUND TUBING HEX FOOT Thermoplastic, or die-cast Zamak insert body with die cast or stainless steel
More informationToll Free Phone, (US & Canada): (800) Toll Free Fax, (US & Canada): (800)
H/P-280 SERIES RANGES Toll Free Phone, (US & Canada): (800) 427-6668 Toll Free Fax, (US & Canada): (800) 36-7745 http://www.garland-group.com Form # H/P-280 Series Parts (6/00) Page 2 Form # H/P-280 Series
More informationMGCR120S MGCR150S MGCR180S-2/3
Undercounter: Solid Door Refrigerators MGCR120S MGCR150S HABS solid door undercounters are finished in 304 stainless steel. Features include: fan forced controller, Danfoss compressor, internal corners,removable
More informationFOOD SERVICE. Single Compartment Scullery Sinks. SINGLE COMPARTMENT WNSF /2 None 80
FOOD SERVICE Single Compartment Scullery Sinks Superior quality 14 gauge, Type 304 stainless steel Designed to withstand the heavy duty requirements of hotel, restaurant, cafeteria and other commercial
More informationClear glass doors o Stainless Steel (SS) stainless steel
Standard Features & Accessories REFRIGERATION All models include Electronic controls with digital temperature readout o Inside temperature can be adjusted from 44 68ºF o Factory set at 55ºF o Sabbath mode
More informationEXAMINE REAL QUALITY
SEATING & MEDICAL ACCESSORIES EXAMINE REAL QUALITY QUALITY. No one knows quality like Clinton Industries. We've built our reputation on it. For more than 30 years, we've been manufacturing products for
More informationModel ND-2 Specification
Model ND-2 Specification The model ND-2 is an exhaust only canopy hood rated for all types of cooking equipment. The hood shall have the size, shape and performance specified on drawings. Construction
More informationCOPYRIGHT 2007, POWERS #CAT-X023 REV. 1/07
COPYRIGHT 2007, POWERS #CAT-X023 REV. 1/07 All photographs and illustrations are considered to be a representation of the actual item. In some cases there may be slight variations. This catalog, copy,
More informationCATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 GAS CONVECTION STEAMERS PRIOR MLS COVERED IN THIS MANUAL
CATALOG OF REPLACEMENT PARTS C24GA6 & C24GA10 GAS CONVECTION STEAMERS C24GA6 C24GA10 ML-136056 ML-136057 PRIOR MLS COVERED IN THIS MANUAL C24GA6 C24GA10 ML-136021 ML-136022 For additional information on
More informationKnürr Smaract. Knürr Smaract. CompactRack
CompactRack Features Ample space for components and cabling provided in an efficient, compact design. The innovative frame concept with triangular extrusions ensures low weight while maintaining high stability.
More informationSpecialty Products SHELVES CPU SOLUTIONS. CPU SideRack. Anthro04_pricelist_standard_specialty.qxd 5/22/ :32 AM Page 36 ADJUSTABLE LAPTOP CART
Anthro04_pricelist_standard_specialty.qxd 5/22/2004 11:32 AM Page 36 ADJUSTABLE LAPTOP CART This lighter-duty Cart is recommended for home and office use. For manufacturing, hospital, or educational use,
More informationKVM KVM. Capture Jet Hybrid Backshelf Hood. Capture Jet TM Hybrid Backshelf Hood
Capture Jet Hybrid Backshelf Hood The hybrid backshelf model of Capture Jet hood is a highly efficient kitchen ventilation hood that removes contaminated air and excess heat emitted by cooking equipment,
More informationJob Reference Number: 5899
Quote 05/17/2018 Project: Job Reference Number: 5899 Item Qty Description From: BS & R Equipment Co. Tom Atkins 8648 W. Elisa St. Boise, ID 83709 208 733 4221 2083455793 (Contact) 1 18 ea WORK TABLE, 60",
More informationOperator System Enclosures
27 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 Operator Systems are designed to house a wide variety of equipment; panel mount, rack mount, desktop PC s, monitors,
More informationPRICELIST 2017 PHILADELPHIA, PA. USA EFFECTIVE JULY 1, 2017
PRICELIST 2017 BAKERY DELI DAIRY HOT FOOD POULTRY RED MEAT & SEAFOOD SERVICE CASES PACKAGED MEATS PRODUCE MERCHANDISERS ICE CREAM NOVELTY FROZEN FOOD FREEZERS ENDLESS REACH-INS EFFECTIVE JULY 1, 2017 Glossary
More informationCornuFé Series P R I C E S & SPECIFICATIONS
CornuFé Series P R I C E S & SPECIFICATIONS centenary collection August 2008 Celebrating 100 years as artisans and craftsmen of exceptional stoves. CornuFé Series Stoves & Cooktops CornuFé 110: C1 1092
More informationDETENTION ACCESSORIES
DETENTION ACCESSORIES Engineered to last 20 years to life. Designed with Durability in Mind PDI s standard and custom specification detention accessories are the most the cost-effective solution for new
More informationRigid Rak. Closet Accessories & Wardrobe Furniture /DAT BuyLine 3206
Rigid Rak Closet Accessories & Wardrobe Furniture 10 57 13/DAT BuyLine 3206 Tubular Steel Wall Racks 1-1/8 square steel tubing wall mount brackets with mitered angle and hidden weld. 3/4 round tubular
More informationHOOD ACCESSORIES HOOD ACCESSORIES HOOD ACCESSORIES
HOOD ACCESSORIES 58 59 VAPORPROOF RECESSED INCANDESCENT LIGHT FIXTURE VAPORPROOF LIGHT FIXTURES RECESSED INCANDESCENT LIGHT FIXTURE Specifications Cut-Out Mounting Diagram Socket: Side mounted porcelain
More informationValves and Cartridges. *KN35 Series Compression Cartridge Valve for 3/4 (19mm) Add-On Faucet. S/S seats for 3/4 faucet KN35-X010-SS
REPLACEMENT PARTS Valves and Cartridges *KN34 Series Compression Cartridge Valve for 3/4 (19mm) s KN34-Y006 KN34-Y007 S/S seats for 3/4 faucet KN34-X009-SS *KN35 Series Compression Cartridge Valve for
More informationCURVED CC5 CC5 RF6 CC5 RF9 CC5 RF12 CC5 RF15 CC5 HT6 CC5 HT9 CC5 HT12. Page 1. Download C.A.D models or contact us on COSSIGA.COM
CURVED CC5 RF CC5 RF6 CC5 RF9 CC5 RF12 CC5 RF15 Deck forced refrigeration Sliding doors front and rear Double glazed Two adjustable shelves Ticket strips on shelves and deck Undershelf and canopy LED lights
More informationT&S Brass Japanese Foodservice Product Catalog
T&S Brass Japanese Foodservice Product Catalog T&S History and Certification For more than 60 years, T&S Brass has been supplying foodservice establishments across the globe with quality, long-lasting,
More informationCentrifugal Roof Supply Fans Models RSF and RSFP. Forward Curved
Centrifugal Roof Supply Fans Models and Forward Curved B U I L D I N G V A L U E I N A I R. April 2008 Centrifugal Filtered Roof Supply Fan When you buy a Greenheck model or, you receive a fan with the
More informationWENDY S COMBO RANGE STW286A SERIES
WENDY S COMBO RANGE STW286A SERIES Manufactured From June 16, 2005 PA R TS LI IS T Toll Free Phone, (US & Canada): (800) 427-6668 Toll Free Fax, (US & Canada): (800) 361-7745 http://www.garland-group.com
More informationDF / DFB / DFC DOUBLE WIDTH DOUBLE INLET FORWARD CURVED FANS
Catalog 6131 DF / DFB / DFC DOUBLE WIDTH DOUBLE INLET FORWARD CURVED FANS FOR ORIGINAL EQUIPMENT MANUFACTURES SERIES 1600 1/98 APPLICATIONS AND AVAILABLE TYPES DF - DFB - DFC DOUBLE INLET FANS DOUBLE INLET
More informationSERVICE PARTS MANUAL ICE SERIES CUBERS MODEL - ICE0806A3-W3-R4, ICE1006A3-W3-R4 Includes 50Hz. and 3 Phase Units
SERVICE PARTS MANUAL ICE SERIES CUBERS MODEL - ICE0806A3-W3-R4, ICE1006A3-W3-R4 Includes 50Hz. and 3 Phase Units Ice-O-Matic 11100 East 45th Ave Denver, Colorado 80239 Part Number 9081307-02 Date 1/09
More informationCURVED CC5 CC5 RF6 CC5 RF9 CC5 RF12 CC5 RF15 CC5 HT6 CC5 HT9 CC5 HT12. Page 1. Download C.A.D models or contact us on COSSIGA.COM
CURVED CC5 RF CC5 RF6 CC5 RF9 CC5 RF12 CC5 RF15 Deck forced refrigeration Sliding doors front and rear Double glazed Two adjustable shelves Ticket strips on shelves and deck Undershelf and canopy LED lights
More informationContacts Introduction
DUKE Work Tables Contents Intro Contacts/Introduction 3 Our Work Tables 6 Understanding Duke's Work Table Model Numbers 7 Units Available 8-15 Accessories & Customization 16-19 Contacts Introduction For
More informationPRICE BID FOR KITCHEN EQUIPMENTS : 5th FLOOR STAFF CANTEEN, LHO, SAMRIDDHI BHAVAN
PRICE BID FOR KITCHEN EQUIPMENTS : 5th FLOOR STAFF CANTEEN, LHO, SAMRIDDHI BHAVAN S.No. Item Description This is indicative picture only Size Qty. Unit Price Amount (Rs.) K-0 Spreader Table: SS 30 Full
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS EV SERIES ELECTRIC RANGES EV12 EV24S EV36S EV48S EV60S EV72S VULCAN-HART DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC 3600 NORTH POINT BLVD., BALTIMORE, MD 21222 FORM 43240 Rev.
More informationSECTION METAL LOCKERS. A. ADAAG - Americans with Disabilities Act, Accessibility Guidelines.
Section 10_51_13_MetalLockerPenco-ProTough_8-19-09 PART 1 GENERAL SECTION 10 51 13 METAL LOCKERS 1.01 SECTION INCLUDES A. Heavy Duty Welded Tubular Frame Lockers. B. Locker benches. 1.02 REFERENCES A.
More informationCreate Dining. Cantilever Booth Bracket For table sizes: 24" x 30", 24" x 42", 30" x 30", 30" x 42", 30" x 48" Hardware not included
Create Dining Ambiance Make your dining area inviting with an attractive design theme and comfortable furnishings. Be sure to allow ample space between tables and chairs for a more relaxing dining experience.
More informationU T I l I T Y C A R T s TO u G h T R A N S P O R T ƒ 32 800.558.8565 414.902.6400 MOVING FOODSERVICE FORWARD DURABILITY index TOUGH U T I l I T Y C A R T s TO u G h T R A N S P O R T TRANSPORT To help
More informationCentrifugal Roof Supply Fans Models RSF and RSFP. Forward Curved
Centrifugal Roof Supply Fans Models and Forward Curved April 2008 Centrifugal Filtered Roof Supply Fan When you buy a Greenheck model or, you receive a fan with the industry s best performance and durability
More information180VC WITH B5 FLANGE / M ,6 0, / M l 5,0 0,7 192 / M ,0 0,9 223
METRIC (IEC) FRAME THYRISTOR RATED DC METRIC (IEC) FRAME MOTORS IP54 These metric dimensioned motors are built to IEC 34-1 electrical and mechanical standards. The IEC 63 and smaller frames are stocked
More informationMASTER SERIES HEAVY DUTY GAS CHAR-BROILER MODELS: MST17B, MST24B, MST34B; MST17BE, MST24BE, MST34BE
Page 86 FORM # Ranges MST Models (Rev 2) MASTER SERIES HEAVY DUTY GAS CHAR-BROILER S:,, ; E, E, E Models:,,, E, E, E 2526000 LP BG Flue Cap 34 1 1 1 2526001 LP BG Flue Cap 24 1 1 2526002 LP BG Flue Cap
More information