Industrial Pumps and Systems Catalog

Transcription

1 INDEX Industrial Pumps and Systems Catalog For most current information, please see our online catalog at CRANE PUMPS & SYSTEMS, Inc Printed in U.S.A USA: (937) Canada: (905) International: (937) A 6/5

2 This page intentionally left blank B USA: (937) Canada: (905) International: (937)

3 BURKS Registered Trademarks Burks Pumps is a registered trademark of Crane Pumps & Systems, Inc. Life-Lok is a registered trademark of Crane Pumps & Systems, Inc. MJ Jacketed Seal is a registered trademark of Crane Pumps & Systems, Inc. Noryl is a registered trademark of General Electric. Other brand and product names are trademarks or registered trademarks of their respective holders. NOTICE Performance and dimensional data presented in this catalog are for planning purposes only and are subject to change without notice. Certified drawings available on request. Consult your authorized Burks Pumps distributor for specific details and the latest information, or call (937) /06 USA: (937) Canada: (905) International: (937) /08

4 Catalog Numbering System For BURKS Industruial Pumps The BURKS pump Catalog Number is composed of letters and numbers which designate four basic types of information:. Motor information 2. Pump series, or type 3. Pump size 4. Pump construction features 35 GA 2 5-¼ 3 AB 4. MOTOR INFORMATION A. A letter prefi x identifi es other than the standard* motor voltage, Hz or enclosure, as follows: A = 5 Volts F = Volts * Standards are: B = Volts L = 50 Hz Voltage: phase - 5/230V D = 380 Volts T = Totally Enclosed 3 phase - 230/460V E = Volts X = Explosion Proof Hz: 60 Hz W = Washdown Enclosure: Open Drip Proof B. The fi rst one, two, three or four numbers refer to motor horsepower, as follows: Single Phase Three Phase 2 = / = /3 33 = /3 300 = 0 5 = /2 35 = /2 350 = 5 7 = 3/4 37 = 3/ = 20 0 = 30 = 3250 = 25 5 = ½ 35 = ½ 3300 = = = = = = = = = = = 7½ 375 = 7½ 3750 = 75 C. The number 4 immediately preceding the pump series designation identifi es the motor as being 750RPM (4 pole). 2. PUMP SERIES, OR TYPE G = Close-Coupled End Suction Centrifugal GA = Close-Coupled End Suction Centrifugal (Tangental Discharge) GB = In-Line Centrifugal GV = Flange Mount Centrifugal (May be part of a factory assembled Condensate Return System.) GNA GNB GNC WA G WPT WST CR CT CS ET ES EC ED FC FS = Base-Mounted Centrifugal w/small power frame = Base-Mounted Centrifugal w/intermediate power frame = Base-Mounted Centrifugal w/large power frame = Close-Coupled Self-Priming Centrifugal = Close-Coupled Self-Priming Centrifugal = Self-Priming Centrifugal Close-Coupled to Gas Engine = Close-Coupled Self-Priming Centrifugal w/viton seal and gasketing - sized for.62 S.G. fl uids = Close-Coupled Self-Priming Centrifugal w/explosion-proof motor - sized for.82 S.G. fl uids = Small close-coupled turbine w/36 Frame open ventilated motor = Small close-coupled turbine = Large close-coupled turbine = Small base-mounted turbine = Large base-mounted turbine = Larger base-mounted turbine = Largest base-mounted turbine = Column - or Pedestal-type sump pump = Submersible sump pump 2 8/08 USA: (937) Canada: (905) International: (937)

5 Catalog Numbering System For BURKS Industruial Pumps 3. PUMP SIZE The numbers following the pump series designation refer to pump size: A. Centrifugals The fi rst number following the series designation refers to nominal impeller diameter. If it is followed by the letter A, this denotes a higher capacity version. End-Suction, In-Line and Flange-Mount centrifugals have an additional number, after a hyphen, which indicates the pump discharge size. The suction port on end-suction pumps is always one pipe size larger than the discharge. GA5-¼, GA6-¼, GA7-¼,GA6-½, GA7-½, GA6-2 G5-¼, G6-¼, G6-½, G9-½, G6-2, G7-2, G7A-2, G9-2, G7-2½, G9-2½, G9-3 B. Turbines The numbers following the series designation refer to impeller/raceway size. A larger number denotes a larger capacity pump. CR6/CT5, 6, 7/CS5 thru CS9 ET5, 6, 7/ES5 thru ES9/EC4 thru EC0/ED8 thru ED8. 4. PUMP CONSTRUCTION FEATURES The following suffi x letters are used to devote various construction features: AB = All Bronze construction AI = All Iron construction F = Flanged suction and discharge connections HT = High Temperature impeller (some turbine pumps) M = Mechanical Shaft Seal E = Mechanical Shaft Seal w/ept rubber parts J = Mechanical Shaft Seal w/cooling Jacket V = Mechanical Shaft Seal w/viton rubber parts SP = Special Order Pump. Non-standard feature(s) not covered by currently used Catalog Number designations (Serial Number must be furnished to properly identify any pump with this Catalog Number suffi x.) SS = Stainless Steel construction X = Built-in basket type strainer Two or more of these suffi x letters may be used on the same Catalog Number. EXAMPLES () (2) (3) 375G7A G 7A-2 3 Phase 7½ Close-Coupled End-Suction Centrifugal 7" Impeller Dia. High Cap. Version 2" Discharge () (2) (3) (4) 205X 20 5 X Phase 2 Close-Coupled Self-Priming Centrifugal 5" Impeller Dia. Built-in Basket-type Strainer () (2) (3) (4) 354CS7MV-AB 354 CS 7 MV-AB 3 Phase /2 725 RPM Size 7 Impeller / Raceway Large Close-Coupled Turbine Mechanical Seal w/viton rubber parts "All Bronze" Construction USA: (937) Canada: (905) International: (937) /06

6 This page intentionally left blank 4 USA: (937) Canada: (905) International: (937)

7 Standard Terms and Conditions OUR ACCEPTANCE OF YOUR ORDER IS EXPRESSLY CONDITIONED ON THE GENERAL TERMS AND CONDITIONS SET FORTH BELOW AND ALL TERMS STATED ON THE FACE OF THIS FORM. THE CONTRACT SHALL NOT INCLUDE ANY DEVIATING OR ADDITIONAL TERMS UNLESS EXPRESSLY AGREED TO IN WRITING AND SIGNED BY AN OFFICER OF OUR COMPANY. PRICES: All prices are subject to change without notice and all shipments will be invoiced at the price in effect at the time of shipment, except when otherwise agreed to in writing by our authorized representative. Published prices are for products of our standard design and construction and any item not covered by the most recent published price list must be referred to us for special pricing. Prices do not include freight. Weights shown in price lists are approximate shipping weights. The amount of any applicable present or future tax or other government charge upon the production, sale, shipment or use of goods ordered or sold is not in the price and will be added to billing unless you provide us with an appropriate exemption certifi cate. QUOTATIONS: Prices quoted by us are valid for 30 days from date of quotation unless we have otherwise specifi ed in writing. Clerical errors on quotations are subject to our correction and such errors will not be binding. CANCELLATION AND REVISIONS: No purchase orders accepted and acknowledged by us may be cancelled or revised by you except with our prior written consent and upon payment of reasonable cancellation charges compensating us for all costs incurred in work done and material purchased. We reserve the right to determine what constitutes reasonable cancellation charges. RETURN OF EQUIPMENT: No equipment shall be returned to us without fi rst obtaining a written Returned Goods Authorization and shipping instructions from us. The returner must prepay the charges in full for transportation to our factory. Credit allowed for new, undamaged equipment of current standard design will be a maximum of 80%; or less as determined by Customer Service; of the invoiced price or current billing price, whichever is less. The minimum value of returned product is $250 invoiced price or current billing price. Equipment which has been used, however slight, will not be accepted. Authorization will not be given for return of equipment, () which would, in our opinion, result in an excess in the amount of stock we normally carry, (2) not invoiced within the last 2 months, or (3) which is non-standard and manufactured specifi cally to a buyer s specifi cations. For non-standard equipment not of our manufacture, the only credit allowed will be such credit as may be allowed by the manufacturer of such equipment. Equipment must be returned within 30 days of the issuance of the Returned Goods Authorization. No item with a net value of less than $35.00 will be authorized for return. Items not available for return are those that have a shelf life and hardware items. Unauthorized returns may be refused and\or returned freight collect. CREDIT AND PAYMENT: Payment is due as noted on our invoice. Overdue accounts are subject to a service charge. All orders are subject to approval of our credit department and we may require full or partial payment in advance. Pro rata payments shall become due as shipments are made. If the shipments are delayed by you for any cause, payments shall become due from date on which we are prepared to make shipment and storage shall be at your risk and expense. If manufacture is delayed by you for any cause, a partial payment based upon the proportion of the order completed shall become due from the date on which we are notifi ed of the delay. SECURITY INTEREST: We shall have a lien on all goods sold as security for payment on the invoice price, and upon request you shall provide and execute a fi nancing statement showing such lien. DELIVERY: We will make reasonable effort to meet your delivery requirement provided you provide us, on a timely basis, all approvals, technical data, instructions and credit approval requirements needed for release of the shipment. However, all delivery and/or shipment dates are estimates only unless we have expressly guaranteed delivery of such dates in writing at your specifi c request. In no event shall we have any liability if delivery is delayed by strikes, labor disturbances, material shortages, plant calamities or disaster, acts of God, government actions, civil disturbance, the failure of any pre-supposed condition of the contract, withholding shipments due to credit clearance, or other interferences beyond our reasonable control, and the date of delivery shall be extended for a period of time equal to the time lost because of any such reason. Emergency Orders and Rush Orders: Contact the Sales Department for applicable handling fees. SHIPPING: Unless you specify in writing and we acknowledge in writing, (A) goods will be boxed or crated as we may deem proper for protection against normal handling and for domestic shipment, (B) routing and manner of shipment will be at our discretion, and may be insured at your expense. An extra charge will be made for special handling. All shipments Crane Pumps & Systems, Inc. 200

8

9

10 IMPORTANT! WARRANTY REGISTRATION Your product is covered by the enclosed Warranty. To complete the Warranty Registration Form go to: If you have a claim under the provision of the warranty, contact your local Crane Pumps & Systems, Inc. Distributor. RETURNED GOODS RETURN OF MERCHANDISE REQUIRES A RETURNED GOODS AUTHORIZATION. CONTACT YOUR LOCAL CRANE PUMPS & SYSTEMS, INC. DISTRIBUTOR. Products Returned Must Be Cleaned, Sanitized, Or Decontaminated As Necessary Prior To Shipment, To Insure That Employees Will Not Be Exposed To Health Hazards In Handling Said Material. All Applicable Laws And Regulations Shall Apply.

11 Pump Weights SERIES: GA4-3/4 SERIES: GA5- SERIES: GA6--/2 3GA4-3/4 /3 37 3GA5- / GA6--/2 70 5GA4-3/4 /2 39 5GA5- / GA6--/2 70 7GA4-3/4 3/4 42 7GA5-3/4 45 5GA6--/2 ½ 75 0GA4-3/4 44 0GA GA6--/ GA4-3/4 ½ 48 5GA5- ½ 5 30GA6--/ GA4-3/4 / GA GA6--/ GA4-3/4 / GA5- / GA--/2 ½ 76 37GA4-3/4 3/4 4 35GA5- / GA6--/ GA4-3/ GA5-3/ GA6--/ GA4-3/4 ½ 49 30GA GA6--/2 5 0 SERIES: GA4-35GA5- ½ GA6--/2 7½ 22 3GA4- / GA SERIES: GA6-2 5GA4- / GA GA GA4-3/4 43 SERIES: GA5--/4 54GA6-2 ½ 78 0GA4-45 3GA5--/4 / GA GA4- ½ 59 5GA5--/4 / GA6-2 ½ 78 33GA4- /3 40 7GA5--/4 3/ GA GA4- /2 4 0GA5--/ GA GA4-3/4 42 5GA5--/4 ½ 5 330GA GA GA5--/ GA GA4- ½ 50 33GA5--/4 / GA6-2 7½ 28 SERIES: GA4--/4 35GA5--/4 /2 43 SERIES: GA7--/2 3GA4--/4 / GA5--/4 3/ GA7--/2 82 5GA4--/4 /2 4 30GA5--/ GA7--/2 ½ 85 7GA4--/4 3/ GA5--/4 ½ GA7--/2 82 0GA4--/ GA5--/ GA7--/2 ½ 85 5GA4--/4 ½ GA5--/ GA7--/ GA4--/4 /3 4 SERIES: GA6--/4 75GA7--/2 7½ 86 35GA4--/4 /2 42 0GA6--/ GA7--/ GA4--/4 3/4 43 5GA6--/4 ½ 5 375GA7--/2 7½ 3 30GA4--/ GA6--/ GA7--/ GA4--/4 ½ 5 30GA6--/ SERIES: G5--/4 SERIES: GA4--/2 30GA6--/4 48 3G5--/4 /3 40 5GA4--/2 / GA6--/4 ½ 52 5G5--/4 /2 42 7GA4--/2 3/ GA6--/ G5--/4 3/4 45 0GA4--/ GA6--/ G5--/4 47 5GA4--/2 ½ 45 SERIES: GA7--/4 5G5--/4 ½ 5 35GA4--/2 / GA7--/ G5--/ GA4--/2 3/ GA7--/ G5--/4 / GA4--/ GA7--/ G5--/4 / GA4--/2 ½ GA7--/4 5 37G5--/4 3/ GA7--/ G5--/4 48 G5--/4 Continued on next page USA: (937) Canada: (905) International: (937) /06

12 Pump Weights SERIES: G5--/4 SERIES: G7 SERIES: G9 35G5--/4 ½ G7-2-/ G9-2 ½ G5--/ G7-2-/ G G5--/ G G SERIES: G6--/4 354G7-2 ½ G G6--/ G G9-2-/ G6--/4 ½ G7A G9-2-/ G6--/ G7A-2 ½ G9-2-/2 7½ G6--/ G7A G9-3F G6--/ G7-2-/2 ½ G9-3F 7½ G6--/4 ½ G7-2-/ G9-3F G6--/ G7-2-/ G9-4F G6--/ G G9-4F 7½ 276 SERIES: G6 75G7-2 7½ G9-4F G6--/ G7A G9A--/ G G7A-2 7½ G9A--/ G6-2 ½ G G9A--/ G6-2-/ G7-2 7½ G G6-2-/2 ½ 9 300G G G6-2-/ G G G6--/ G7A-2 7½ G G G7A G9-2-/ G6-2 ½ G7A G9-2-/ G6-2-/ G7A G9-2-/ G6-2-/2 ½ G7-2-/ G9-2-/ G6-2-/ G7-2-/ G9-2-/ G6--/2 ½ G7-2-/ G9-3F G6--/ SERIES: G9 3400G9-3F G6--/ G9A--/ G9-3F G6--/ G9A--/2 ½ 20 SERIES: DF4--/4 75G6--/2 7½ G9A--/ DF4--/4 / G G9-2 ½ 53 5DF4--/4 / G G DF4--/4 3/ G G DF4--/ G6-2 7½ G DF4--/4 /3 4 75G6-2-/2 7½ G9-2-/ DF4--/4 /2 43 SERIES: G7 504G9-2-/ DF4--/4 3/ G G9-2-/2 7½ DF4--/ G7-2 ½ 0 504G9-3F G G9-3F 7½ G7A G9A--/2 0 54G7A-2 ½ 0 354G9A--/2 ½ G7A G9A--/ G7-2-/2 ½ G9A--/ Continued next column... 0 /06 USA: (937) Canada: (905) International: (937)

13 Pump Weights SERIES: DF6-2-/2 SERIES: GV - 9 Gallon Receiver SERIES: GV6-4 Gallon Receiver 04DF6-2-/2 83 3GV6-9 / GV6-4D 3/ DF6-2-/2 ½ 9 5GV6-9 / GV6-4D DF6-2-/ GV6-9 3/ GV6-4D ½ DF6-2-/ GV GV6-4D DF6-2-/2 83 5GV6-9 ½ GV6-4D DF6-2-/2 ½ 9 20GV SERIES: GV6-20 Gallon Receiver 3204DF6-2-/ GV GV6-20 / DF6-2-/ GV6-9 / GV6-20 /2 269 SERIES: GB 35GV6-9 / GV6-20 3/ GB5--/2F / GV6-9 3/ GV GB5--/2 / GV GV6-20 ½ 284 7GB5--/2F 3/ GV6-9 ½ GV GB5--/2F GV GV GB5--/2F ½ GV GV6-20 / GB5--/ SERIES: GV6-4 Gallon Receiver 35GV6-20 / GB5--/2F /3 47 3GV6-4 / GV6-20 3/ GB5--/2F /2 53 5GV6-4 / GV GB5--/2F 3/4 53 7GV6-4 3/ GV6-20 ½ GB5--/2F 58 0GV GV GB5--/2F ½ 60 5GV6-4 ½ GV GB5--/2F GV GV6-20D /3 35 SERIES: GV6 30GV GV6-20D / GV6--/4FC / GV6-4 /3 26 7GV6-20D 3/ GV6--/4FC / GV6-4 / GV6-20D 333 7GV6--/4FC 3/ GV6-4 3/ GV6-20D ½ 353 0GV6--/4FC 52 30GV GV6-20D GV6--/4FC ½ 62 35GV6-4 ½ GV6-20D GV6--/4FC GV GV6-20D / GV6--/4FC GV GV6-20D / GV6--/4FC /3 43 3GV6-4D / GV6-20D 3/ GV6--/4FC /2 47 5GV6-4D / GV6-20D GV6--/4FC 3/4 50 7GV6-4D 3/ GV6-20D ½ GV6--/4FC 42 0GV6-4D GV6-20D GV6--/4FC ½ 62 5GV6-4D ½ GV6-20D GV6--/4FC GV6-4D GV6--/4FC GV6-4D GV6-4D / GV6-4D /2 267 Continued next column... USA: (937) Canada: (905) International: (937) /5

14 Pump Weights SERIES: GV6-36 Gallon Receiver SERIES: GV6-23-SR Gallon Receiver SERIES: GV6-36-SR Gallon Receiver 3GV6-36 /3 47 3GV6-23-SR / GV6-36-SR GV6-36 /2 42 5GV6-23-SR / GV6-36-SR GV6-36 3/ GV6-23-SR 3/ GV6-36D-SR / GV GV6-23-SR 242 5GV6-36D-SR /2 36 5GV6-36 ½ 436 5GV6-23-SR ½ 252 7GV6-36D-SR 3/ GV GV6-23-SR GV6-36D-SR GV GV6-23-SR GV6-36D-SR ½ GV6-36 / GV6-23-SR / GV6-36D-SR GV6-36 / GV6-23-SR / GV6-36D-SR GV6-36 3/ GV6-23-SR 3/ GV6-36D-SR / GV GV6-23-SR GV6-36D-SR / GV6-36 ½ GV6-23-SR ½ GV6-36D-SR 3/ GV GV6-23-SR GV6-36D-SR GV GV6-23-SR GV6-36D-SR ½ 346 3GV6-36D / GV6-23D-SR / GV6-36D-SR GV6-36D / GV6-23D-SR / GV6-36-SR GV6-36D 3/ GV6-23D-SR 3/4 290 SERIES: GNA 0GV6-36D 478 0GV6-23D-SR 294 GNA5--/ GV6-36D ½ 498 5GV6-23D-SR ½ 34 GNA6--/ GV6-36D GV6-23D-SR SERIES: GNB 30GV6-36D GV6-23D-SR GNB6--/ GV6-36D / GV6-23D-SR /3 276 GNB GV6-36D / GV6-23D-SR /2 284 GNB6-2-/ GV6-36D 3/ GV6-23D-SR 3/4 290 GNB GV6-36D GV6-23D-SR 294 GNB7A GV6-36D ½ GV6-23D-SR ½ 34 GNB9A--/ GV6-36D GV6-23D-SR SERIES: GNC 330GV6-36D GV6-23D-SR GNC7-2-/ SERIES: GV6-36-SR Gallon Receiver GNC GV6-36-SR /3 265 GNC9-2-/ GV6-36-SR /2 269 GNC9-3F GV6-36-SR 3/4 272 GNC9A-3F GV6-36-SR 274 SERIES: 4GNA & 4GNB 5GV6-36-SR ½ 284 4GNA6--/ GV6-36-SR GNB7-2-/ GV6-36-SR GNB GV6-36-SR / GNB9-2-/ GV6-36-SR / GNB9-3F GV6-36-SR 3/ GNB9-4F GV6-36-SR GV6-36-SR ½ 284 Continued on next column... 2 /06 USA: (937) Canada: (905) International: (937)

15 Pump Weights SERIES: WG6-2 SERIES: WPT SERIES: WST 50WG A3WPT3A /3 37 X20WST5AX GW6-2 7½ 86 3WPT3A /3 37 X35WST5 / GW WPT5 /2 56 X37WST5 3/ WG6-2 7½ 86 7WPT5 3/4 6 X30WST WG WPT5 62 X35WST5 ½ 80 5WPT5 ½ 64 X320WST SERIES: WA6 20WPT X320WST5A WA WPT X35WST5X /2 00 5WA6 ½ 72 30WPT5A 3 76 X37WST5X 3/ WA WPT5X /2 79 X30WST5X 05 30WA WPT5X 3/4 85 X35WST5X ½ 05 30WA6 70 0WPT5X 83 X320WST5X WA6 ½ 72 5WPT5X ½ 89 X320WST5AX WA WPT5X 2 98 SERIES: G 330WA WPT5X 3 0 G5A 3 65 SERIES: 30WPT5AX 3 0 SERIES: CR A3A / WPT3A /3 39 A3CR6M /3 7 33A / WPT5 /2 57 3CR6M / / WPT5 3/4 62 SERIES: CT 75 3/ WPT CT6M / WPT5 ½ 65 24CT7M / ½ WPT CT5M / WPT CT6M / A WPT5A CT5M / X / WPT5X /2 82 5CT6M / X 3/ WPT5X 3/4 86 5CT7M / X 85 30WPT5X 85 5CT8M / X ½ 95 35WPT5X ½ 88 7CT5M 3/ X WPT5X CT6M 3/ AX WPT5X CT7M 3/ A / WPT5AX CT8M 3/4 Factory 355 /2 60 SERIES: WST 0CT8M Factory 375 3/4 62 X5WST5 / CT5M / X7WST5 3/ CT6M / ½ 70 X0WST CT5M / X5WST5 ½ 80 35CT6M / A 2 76 X20WST CT7M / X /2 80 X20WST5A CT6M 3/ X 3/4 82 X5WST5X / CT7M 3/ X 85 X7WST5X 3/ CT8M /2 Factory 355X ½ 90 X0WST5X 05 37CT8M 3/4 Factory 3205X 2 96 X5WST5X ½ 05 30CT8M Factory 3205AX 2 96 X20WST5X 2 05 Continued next column... USA: (937) Canada: (905) International: (937) /06

16 Pump Weights SERIES: CT Continued SERIES: CS L3CT5M / CS8M 5 75 L3CT6M / CS9M 5 75 L5CT5M /2 35 L20CS6M 2 65 L5CT6M /2 35 SERIES: ET LCT7M /2 35 ET5M L7CT6M 3/4 37 ET6M L7CT7M 3/4 37 ET7M L0CT7M 56 ET8M L5CT8M /2 Factory SERIES: ES L7CT8M 3/4 Factory ES5M L0CT8M Factory ES6M SERIES: CS ES7M CS5M /3 52 ES8M CS6M /3 52 ES9M CS7M /3 52 SERIES: EC 54CS6M /2 55 EC4M CS7M /2 55 EC5M CS8M /2 55 EC6M CS5M /3 48 EC7M CS6M /3 48 EC8M CS7M /3 48 EC9M CS6M /2 5 EC0M CS7M /2 5 SERIES: ED 354CS8M /2 5 ED8M CS5M 56 ED9M CS6M 56 ED0M CS5M ½ 60 EDM CS6M ½ 60 ED2M CS7M ½ 60 ED4M CS6M CS7M 2 65 See Page 9 for Motor Weights 20CS8M CS5M 56 30CS6M 56 35CS5M ½ 60 35CS6M ½ 60 35CS7M ½ CS6M CS7M CS8M CS7M CS8M CS9M /06 USA: (937) Canada: (905) International: (937)

17 Motor Weights for Base Mounted Pumps NEMA Frame NEMA Frame NEMA Frame SINGLE PHASE SINGLE PHASE SINGLE PHASE Open Drip Proof 60 Hz RPM - 5/230 V Totally Enclosed 60 Hz RPM - 5/230 V Explosion Proof 60 Hz RPM - 5/230 V / / / / T 46 43T 47 43T 47 ½ 45T 54 43T 60 45T T 79 82T 65 82T T 90 84T 77 84T T 99 23T 99 23T 99 Open Drip Proof 60 Hz RPM - 5/230 V Totally Enclosed 60 Hz RPM - 5/230 V Explosion Proof 60 Hz RPM - 5/230 V / / / ½ 42T 46 43T 39 43T T 54 45T 4 45T T 79 82T 73 82T T 90 84T 98 84T -- THREE PHASE THREE PHASE THREE PHASE Open Drip Proof 60 Hz RPM - 230/460 V Totally Enclosed 60 Hz RPM - 230/460 V Explosion Proof 60 Hz RPM - 230/460 V / / / / T 34 43T 39 43T 39 ½ 45T 42 45T 43 45T T 42 45T 47 45T T 7 82T 57 82T T 82 84T 66 84T 66 7½ 23T 24 23T 7 23T T 44 25T 39 25T T T T 267 USA: (937) Canada: (905) International: (937) /06

18 Motor Weights for Base Mounted Pumps NEMA Frame NEMA Frame NEMA Frame THREE PHASE THREE PHASE THREE PHASE Open Drip Proof 60 Hz RPM - 230/460 V Totally Enclosed 60 Hz RPM - 230/460 V Explosion Proof 60 Hz RPM - 230/460 V / / / ½ 43T 34 43T 40 43T T 42 45T 45 45T T 42 82T 54 82T T 65 84T 65 84T 65 7½ 84T 79 23T 09 23T T 09 25T 30 25T T T T T T T T TS TS TS TS TS TS TS TS TS TS TS TS TS TS /06 USA: (937) Canada: (905) International: (937)

19 Weights for Accessories DESCRIPTION HORIZONTAL STEEL Receiver DESCRIPTION REPAIR KIT FOR CR SERIES PUMPS Gallon CR6M Pumps Gallon MV 6MV Pumps Gallon 90 REPAIR KIT FOR CT, ET, CS & ES SERIES PUMPS Gallon CT5M & ET5M Gallon CT6M & ET6M CT7M & ET7M CS5M & ES5M Float Switch CS6M & ES6M Alternator CS7M & ES7M Make-up Valve - /2" CS8M & ES8M Make-up Valve - 3/4" CS9M & ES9M Water Gauge - 0" 2 IMPELLER & RACEWAY REPAIR KIT For EC & ED SERIES 0778 Water Gauge - 6" E6-E6M-EC4-EC4M Pressure Relief Valve - /2" E7-E7M-EC5-EC5M Pressure Relief Valve - 3/4" E8-E8M-EC6-EC6M Pressure Relief Valve - 3/4" E9-E9M-EC7-EC7M Pressure Relief Valve - " E20-E20M-EC8-EC8M Pressure Relief Valve - " E2-E2M-EC9-EC9M Pressure Relief Valve - " E22-E22M-EC0-EC0M Strainer - " E23-E23M-ED8-ED8M A Strainer - " Brass E24-E24M-ED9-ED9M Strainer - ½" E25-E25M-ED0-ED0M A Strainer - ½" Brass E26-E26M-ED-EDM Strainer - 2½" E27-E27M-ED2-ED2M A Strainer - 2½" Brass E29-E29M-ED4-ED4M Compression Strainer - " 3 MECHANICAL SHAFT SEAL REPAIR KIT For ECM & EDM 0994 Compression Strainer - ½" ECM Pumps Lint Strainer - ½" 9 27 EDM Pumps Spanner Wrench - 3/6" Pin PACKING GLAND REPAIR KIT For EC & ED 07492A Spanner Wrench - 5/32" 2709 EC Pumps 2877A Touch-up Enamel - Blue ED Pumps 0772 Float Switch Pressure Regulator Valve - /2" Pressure Regulator Valve - 3/4" " - For 9 Gallon Receiver " - For 4 Gallon Receiver ¾" - For 23 Gallon Receiver ¾" - For 36 Gallon Receiver 2 USA: (937) Canada: (905) International: (937) /06

20 This page intentionally left blank 8 USA: (937) Canada: (905) International: (937)