Model Domino Junior. Pilot & Mechanical Valve. Superior performance throughout the full operational range. Up to 10 bar operating pressure

Transcription

1 R R Pilot & Mechanical Valve Model Domino Junior Up to 0 bar operating pressure Superior performance throughout the full operational range Features: 6L stainless steel Arctic Service options to -60 o C Air, sweet & sour gases, hydraulic oil tel:- +44(0) fax:- +44(0) March 0 tel:- +44(0)8 08 fax:- +44(0)8 8

2 R TECHNICAL AL INFORMA ORMATION OPERATING MEDIA Air, sweet and sour gas, hydraulic oil FLOW PERFORMANCE - 5 SCFM Nl/sec 708 Nl/min 0.7 Cv - SCFM 5 Nl/sec 906 Nl/min 0.9 Cv OPERATING PRESSURE SURE 0-0 bar standard service 0-8 bar ASJE/AHSJE/ASJJE/AHSJJE MECHANICAL AL CONSTRUCTION TION Body:- stainless steel 6L Fasteners:- Metric A4 8/0 6 grade stainless steel Seat Material:- Viton (standard). Alternative elastomers available for extreme conditions Springs:- stainless steel 6L Ports:- /4 thread milled NPT (BSPP options available) TEMPERATURE TURE RANGE: SJE/HSJE/SJJE/HSJJE ASJE/AHSJE/ASJJE/AHSJJE -0 o C to +80 o C -60 o C to +40 o C SEAL REPAIR KITS example codes:- SRKSJE06-P/00-VITON SRKSJE06-P9-VITON SRKSJE06-M-VITON LOGIC VAL ALVES - PREFERRED MODEL LIST PILOT VAL SJE06-P--NU-00 /4" NPT, Pilot operated, way position, normally universal, spring return, C.v. 0.7, 0 bar (BBB) SJE06-P--NU-P /4" NPT, Pilot operated, way position, normally universal, pilot return, C.v. 0.7, 0 bar (BBB) MECHANICAL AL VAL SJE06-M--NU-00 /4" NPT, Cam operated, way position, normally universal, spring return, C.v. 0.7, 0 bar (BBB) PANIC VAL SJJE06--PV /4" NPT, way position, push button to block, pull button to bleed, C.v bar (BBB) SJJE06--PV /4" NPT, way position, push button to block, pull button to bleed, C.v bar (BBB) RESET VAL SJJE06-P--NC-M5-K54 /4" NPT, Pull button or energise pilot to operate, normally closed, spring return, C.v. 0.7, 0 bar (BAB) tel:- +44(0) fax:- +44(0) March 0 tel:- +44(0)8 08 fax:- +44(0)8 8

3 R R SJJE06-P--NC-M6-K54 /4" NPT, Pull button or energise pilot to operate, mechanical latch, normally closed, spring return, C.v. 0.7, 0 bar (BAB) SJJE06-P9--NC-M5-K54 /4" NPT, Pull button to energise air latc h pilot, normally closed, spring return, C.v. 0.7, 0 bar (BAB) SJJ06-P9--NC-M5-K54-K7C /4" NPT, Pull button or energise air latc h pilot, normally closed, spring return with eyeball indicator from port (green on, red off), C.v. 0.7, 0 bar (BAB) SJJ06-P9--NC-M6-K54-K7C /4" NPT, Pull button or energise pilot and pull button to operate, mechanical latch, normally closed, spring return with eyeball indicator from port (green on, red off), C.v. 0.7, 0 bar (BAB) SJJE06-P9--NC-M6-K54 /4" NPT, Pull button or energise pilot and pull button to operate, mechanical latch, normally closed, spring return, preliminary latch pin, C.v. 0.7, 0 bar (BAB) SJJE06-P9X--NC-M5-K54- K7P /4" NPT, Pull button to energise air latch pilot, normally closed, spring return, with eyeball indicator frompilot with restricted feed to port in energised state (green on, red off) C.v. 0.7, 0 bar (BAB) RESET VAL SJJE06-M--NU-00 /4" NPT, shrouded push button, normally universal, spring return, C.v. 0.7, 0 bar SJJE06-M--NU-00-K0 /4" NPT, push button, normally universal, spring return, C.v. 078, 0 bar SJJE06-M4--NU-04 /4" NPT, push/pull button, normally universal,detented, C.v. 0.7, 0 bar ALL VALVES ABOVE AVAILABLE FOR HYDRAULIC SERVICE WITH THE ADDITION OF H AT THE START OF THE START NUMBER tel:- +44(0) fax:- +44(0) March 0 tel:- +44(0)8 08 fax:- +44(0)8 8

4 R SELECTION CHART : J06 SJE06 gaseous service HSJE06 hydraulic service ASJE06 / AHSJE06 arctic service (-50 o C) gaseous / hydraulic P pilot operator M plunger actuator M roller cam operated M5 key operator -way, -position -way, -position 5 5-port, -position NC NO NU XX Normally Closed Normally Open Normally Universal 5 valves only 00 spring return end cap P M M pilot operator See Note below plunger actuator roller cam operated K4 valve exhaust bug vent K6 BSPP port option K54 block after bleed (std for HSJ/AHSJ) L6 proximity switch (consult BFP) Model Code Primary Actuator Return Devices - Air Pilot - Hand / Mechanical - Options SJE06 - P - - NC K4 Ordering Example NOTE:- the bodies of the way position junior range have been reduced from / bar stock to / 4 bar stock. This has been reflected by the addition of the letter e in the part code e.g. SJJE06, SJE06 etc. This is applicable to all options except for when using K7 and 5 way position which will remain as SJJ06 etc. tel:- +44(0) fax:- +44(0) March 0 4 tel:- +44(0)8 08 fax:- +44(0)8 8

5 R R SELECTION CHART : JJ06 SJJE06 / HSJJE06 gaseous / hydraulic service ASJJE06 / AHSJJE06 arctic service (-50 o C) gaseous / hydraulic service P pilot operator P9 air latch pilot operator P9 air latch pilot operator - HSJJ or AHSJJ only See Note below Model Code Air Pilot Primary Actuator M M9 M4 shrouded push button panel mounting push / pull (padlockable) panel mounting push / pull panel mounting -way, -position -way, -position 5 5-port, -position Hand / Mechanical Primary Actuator NC NO NU XX Normally Closed Normally Open Normally Universal 5 valves only 00 spring return end cap 04 blanking cap - M9 & M4 only 05 detented action end cap - M9 & M4 only Return Devices - M5 M6 pull button spring return with panel mount pull button spring return with preliminary latch & panel mount Hand / Mechanical - K4 K6 K0 K K7 K8 K54 L6 valve exhaust bug vent BSPP port option black plastic button extra panel mount ring eye ball indicator - M5 / M6 only red plastic button block after bleed (std for M5/M6 and HSJ/AHSJ series) proximity switch (consult Bifold Fluidpower Ltd) Options SJJE06 - P9 - - NC - M6 - K54 Ordering Example NOTE:- the bodies of the way position junior range have been reduced from / bar stock to / 4 bar stock. This has been reflected by the addition of the letter e in the part code e.g. SJJE06, SJE06 etc. This is applicable to all options except for when using K7 and 5 way position which will remain as SJJ06 etc. tel:- +44(0) fax:- +44(0) March 0 5 tel:- +44(0)8 08 fax:- +44(0)8 8

6 R UK Office Greenside Way, Middleton, Manchester, M4 SW Tel:- +44 (0) Fax:- +44 (0) USA Office 490 Westheimer, Suite 900, Houston, Texas, Tel: Fax: marketing@bifold.co.uk UK Office Asia Greenside Pacific Way, Office Middleton, Manchester, M4 SW Toa Payoh Industrial Park, Lorong 8 #07-475, Singapore, Tel:- +44 (0) Tel: Fax:- +44 (0) Fax: sales@bifold-fluidpower.co.uk - marketing@bifold.co.uk USA Office 490 Westheimer, Suite 900, Houston, Texas, Tel: Fax: Quality Assurance - sales@bifold-fluidpower.com Web:- All Bifold Fluidpower products are manufactured to a most stringent QA programme. Every care is taken at all stages of manufacture to ensure that every product will give optimum performance and reliability. We are recognised to EN ISO 900:000. Functional test certificate, letter of conformity and copies of original mill certificates, providing total traceability are available on request, to BSEN 004..B where available. The manufacturer reserves the right to make changes to the specifications and design etc., without prior notice Asia Pacific Office Accuracy of information 60 Orchard Road, #0-0 International Building, Singapore 8869 Tel: Fax: bifold@singnet.com.sg We take care to ensure that product information in this catalogue is reasonably accurate and up-to-date. However, our products and services are continually updated so to ensure accurate and up-to-date information please refer to the issue list on the web site or contact a member of our sales team. tel:- +44(0) fax:- +44(0) C 0 March 0 6 tel:- +44(0)8 08 fax:- +44(0)8 8