SPECIFICATION SHEET Pulse tool / Impact Wrench Testing System MODEL : IWT-101
|
|
- Allan Copeland
- 5 years ago
- Views:
Transcription
1 Applications Calibration of Impact tools Calibration oil pulse tools And also any type of manual wrenches Importance of Torque tool calibration: Controlling torque of a torque tool is important for companies to ensure proper torque being applied for their product s quality, safety and reliability and also to Maintain gauge requirements associated with ISO 9001 quality standard. By regular calibration one can assure that the accuracy of a torque tool is within the specified tolerances and maintain continuous quality standards in the assembly process. The Calibration ensures the performance of a torque tool and indicates the need for any adjustment. Also the potential tooling problems can be identified before they arise, either due to tool wear and tear or broken components. Hence, the torque tool calibration equipment plays an important role along with traceability to assure that all measuring results are in accordance to the National/international standards Features Unit OR The system consists of Torque Sensors, Digital Torque Display Digital display of Torque, Impact per minute/pulse per minute(for pulse tools), Or Digital display of Torque + Impact per minute + Free Speed Measurement Or Digital display of Torque + Impact per minute + Free Speed Measurement + Pressure, Free speed measuring fixture depending on the customer requirement. Rigid table to mount the Torque sensor, Display unit and Free speed measuring unit Optional
2 Specification : I. Torque Sensors: RATED CAPACITIES : 10 Nm, 20 Nm, 50 Nm, 100 Nm, 200 Nm, 500 Nm, 1000 Nm, 2000 Nm ACCURACY(MAX ERRORS) Non Linearity :. ± % of rated output Hysteresis : % of rated output Reproducibility.: 0. 5 % of rated output Non Repeatability : 0.25 % of rated output Zero Return.: ± 0.1 % of rated output ENVIRONMENTAL Compensated Temperature Range : -10 C to + 40 C Operating Temperature Range: -20 C to + 60 C Effect of temperature on output : ± 0.005% of rated output/ C Effect of temperature on zero : ± 0.005% of rated output / C II. Display unit to choose : ELECTRICAL Rated output (Sensitivity) : 2 mv/v ± 10% of rated capacity Zero Balance : ± 2% of rated output Bridge resistance : 350 Ohms- nominal Recommended Excitation Voltage 10 VDC Maximum Excitation Voltage 15 VDC Insulation Resistance : 1000 Mega ohms or more MECHANICAL Safe Overload : 150% of rated output Safe side Load : 30% of rated output Ultimate overload : 300 of rated output Cable length : 2 Metres Twist angle : 0.2 at rated capacity Material, Finish & construction: Alloy steel, Electroless plated Environmental Protection. IP 50 A. only torque display B. Torque + Impact per minute(blows per minute) C. Torque + Impact per minute + Free Speed Measurement D. Torque + Impact per minute + Free Speed Measurement + Pressure
3 A. Features : [only torque display] High resolution LCD Display unit with feather touch keys to read Torque in Trace mode, Peak hold & First peak mode with high sampling rate of 2400 Hz. Timer along with NO/NC contact to shut off air when set time is reached through a solenoid switch automatically Selectable unit of measurement, Nm, kgfm & Ft lbs. Operates on 230 V 50Hz A.C. Suitable for clock wise and counter clock wise operation. Combined accuracy of the torque sensor and the display unit (including measurement uncertainty) better than ± 0.5 % of rated capacity Calibration facility To comply with IS/ISO 6789:2004 for click type torque wrench calibration, the system is provided with a Timer in order to measure time during slow and uniform application of torque from 80% to 100% to achieve the set torque value in 0.5 to 4s. [Optional if, required] B. [Torque + Impact per minute(blows per minute) Same as above Model DU-RB-108 but with following additional features - Display of no. of Blows per minute upto 9999 blows per minute (pulse per minute for pulse tools) with a resolution of 1 blow per minute, accuracy 1% of the reading C. [Torque + Impact per minute + Free Speed Measurement ] Same as above Model DU-RB-109 but with following additional features - Display of speed 9999 rpm with a resolution of 1 rpm, accuracy 1% of the reading D. [Torque + Impact per minute + Free Speed Measurement + Pressure] Same as above Model DU-RB-110 but with following additional features - Display of pressure upto 10 bar with a resolution of 0.01 bar, accuracy 0.5 % FSD
4 Impact Wrench Testing System Resolution of display unit depending on the range of torque sensor selected: Range of Torque sensor Torque display resolution 2 to 10 Nm 4 to 20 Nm 10 to 50 Nm 20 to 100 Nm 40 to 200 Nm 100 to 500 Nm 200 to 1000 Nm 400 to 2000 Nm Nm III. IV. Free Speed Measurement Fixture: To use with certain Display models Non- contact speed sensor and bearing supported 60 teeth wheel for free speed measurement of impact tool or oil pulse tool Pressure Transducer: - Pressure transducer of range 10 bar to use with display model V. Digital Pressure gauge: VI. to use with certain display models - Upto 10 bar, resolution 0.01 bar, accuracy 0.5 % FSD, built-in battery Pressure Regulator with Filter VII. Solenoid Switch VIII. Hose pipe and adopters as per the size and length IX. Impact wrench/pulse tool Software: - IWTS -1 Torque testing software to analyse the data stored In the display unit - IWTS -2 Torque testing software to download continuous real time data capture
5 Impact Wrench Testing System Calibration Report (Optional) NABL accredited laboratory calibration certificate traceable to National/International standards for Torque sensor with digital display unit in clockwise, counter clockwise or both. Note In view of continuous improvement in Design and performance, specification is subject to change without notice. Consult factory for more technical information
KD45 ±20N. Description
KD45 ±20N The force sensor KD45 has the geometry of a miniature load cell. It is fastened on one side using the through holes ø3.2. There is a thread M3 for force transmission. Force transmission is displaced
More informationKM26z 20N; 50N; 100N, 200N, 500N, 1kN, 2kN, 5kN
KM26z 20N; 50N; 100N, 200N, 500N, 1kN, 2kN, Description The load cell KM26z is a membrane-type force sensor with small dimensions. It is suitable for measuring compressive and tensile forces. For force
More informationCheckStar In-line Rotary Torque Transducer. Crane Electronics Ltd The force in torque management
CheckStar In-line Rotary Torque Transducer Crane s CheckStar sets the standard for dynamic torque and angle measurements of all continuous drive and impulse tools, with proven reliable performance in thousands
More informationCheckStar In line torque transducers with angle measurement option
Key Features Dynamic torque measurement of all continuous drive and impulse tools Proven reliable performance for impulse tool measurement Guaranteed no brush bounce Compact design and no size increase
More informationLoad Cells. For Test, Measurement, and Monitoring Requirements in Automotive, Aerospace, R&D, and Process Control Applications
Load Cells For Test, Measurement, and Monitoring Requirements in Automotive, Aerospace, R&D, and Process Control Applications Highlights Low Deflection; High Accuracy Fatigue-rated Versions Low Profile
More informationThis section covers the comprehensive range of Torque Calibration equipment manufactured by Gedore Torque.
Torque Calibration Introduction This section covers the comprehensive range of Torque Calibration equipment manufactured by Gedore Torque. Torque calibration equipment is used for the testing, calibration
More informationWhat is the secret to our success?
Australia s Quality Load Cell Manufacturer For over 20 years Delphi has been a reliable source of tension load measurement solutions... What is the secret to our success? TENSION CELLS Delphi Measurement
More informationIntroduction to Torque Calibration
Introduction to Torque Calibration Calibrate THE IMPORTANCE OF TORQUE CALIBRATION Regular Torque Tool calibration guarantees repeated accuracy and adherence to International Standards. Calibration also
More informationSEAT BELT LOAD CELL. Load cell that measures the forces at the seat belt during automotive crash or sled tests.
SEAT BELT LOAD CELL Load cell that measures the forces at the seat belt during automotive crash or sled tests. Lightweight and durable design High accuracy User replaceable cable Easy attachment of seat
More informationThe platform is placed on the weighing platform using three or four height-adjustable elastomer bearings (EL 120), in order to avoid twisting.
LCS130 2t Description The load cell LCS130 is used in platform-type weighing scales. Three to four load cells support a platform of any size. The output current calibration allows parallel connection of
More informationK3D300 ±200kN. Description
K3D300 ±200kN The 3-axis sensor K3D300 is suitable for measuring force in three mutually perpendicular axes. Force is applied from the 150 mm x 150 mm recess. A component can be installed on this surface
More informationFax or to SENTRAN Applications Engineering Group: (909) or
WorkSheet LOAD PINS Fax or email to SENTRAN Applications Engineering Group: (909) 605-6305 or mail@sentranllc.com CONTACT: PHONE: COMPANY: FAX: ADDRESS: EMAIL: CITY: STATE: ZIP: tice! To whom it may concern:
More informationPull-Off Adhesion Tester
PosiTest Measures adhesion of coatings to metal, wood, concrete and other substrates revolutionary self-alignment feature and pull rate indicator. Available in 2 models... Manual or Automatic PosiTest
More informationK3D300 ±50kN. Description
K3D300 ±50kN The 3-axis sensor K3D300 is suitable for measuring force in three mutually perpendicular axes. Force is applied from the 150 mm x 150 mm recess. A component can be installed on this surface
More informationData Sheet Type FF420. Series 420 Specification Flange / Flange. Series 420 Non-Contact Rotary Torque Transducer
Datum Electronics has further extended its standard range of torque transducers to cater for higher rotary speeds and an increased number of torque ranges. The 420 Series torque transducers operate with
More informationModel 6A Series 6-Axis Load Cells (Fx Fy Fz Mx My Mz)
6AXX 10-20 - 17 Model 6A Series 6-Axis Load Cells (Fx Fy Fz Mx My Mz) Interface s 6-axis load cell measures forces simultaneously in three mutually perpendicular axes and three simultaneous torques about
More informationSturtevant Richmont Presents: Error Proof Your Error Proofing With A Complete Torque Verification Program
Sturtevant Richmont Presents: Error Proof Your Error Proofing With A Complete Torque Verification Program Quality programs and processes are all about eliminating variables and replacing them with accurate
More informationTENSION LOAD. Product Overview
Product Overview For almost 20 years Delphi has been a reliable source of tension load cells and solutions. What is the secret to our success Safety: Delphi s range of Tension load cells are designed to
More informationPrecision Load Cells. The World of Precision Made Force Transducers. A world of experience TEST AND MOTION SIMULATION
Precision Load Cells The World of Precision Made Force Transducers With many years of experience in the Precision Load Cells field, Servotest has been working to develop testing equipment that exceeds
More informationAlcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
More informationCapture Torque Analyzer Operation Instructions Rev 1.0 (6/30/2014)
Page 1 Features - Enables calibration and analysis of hand and power torque tools. - Selection of three operation modes: Track, Peak & First Peak - Seven units of torque measurements: (ozf.in, lbf.in,
More informationAPPEFNDIX 1 SPECIFICATIONS OF THE TEST ENGINE
168 APPEFNDIX 1 SPECIFICATIONS OF THE TEST ENGINE Make and Model General details Number of cylinders Bore X Stroke Swept volume Clearance volume Rated output Compression ratio Rated speed Nozzle opening
More informationTORQUE MEASUREMENT EQUIPMENT
A I M C O TORQUE MEASUREMENT EQUIPMENT UET Electronic Torque Testers 29 TorqueStar Torque Analyzers 30 ToolStar Joint Analyzers 32 CheckStar Rotary Transducers 34 Transducers and Joint Simulators 36 Electronic
More informationMulti-Range, Rigid Stem Melt Pressure Transducer
DYNISCO MODEL MRT460 Multi-Range, Rigid Stem Melt Pressure Transducer Description Now, users can select from among four pressure ranges on one transducer with the new Dynisco MRT, the first multi - range
More informationETHOS Digital Sound Level Meter. Operating Manual
ETHOS 4410 Digital Sound Level Meter Operating Manual Contents I. Preface 1 II. Safety instructions...1 III. LCD display introduction.........1 IV. Functional characteristics description.........2 V. Specifications.......2
More informationEC1 Pocket Conductivity Tester Instruction Manual
EC1 Pocket Conductivity Tester Instruction Manual OAKTON INSTRUMENTS www.4oakton.com v2.2 EC1 Pocket Conductivity Tester Instruction Manual 1. Battery Installation Please install batteries according to
More informationPRODUCT / TEST MANUAL 2L9K2 BATTERY EARTH FAULT RELAY
Sheet 1 of 5 Order Number Serial Number PRODUCT / TEST MANUAL 2L9K2 BATTERY EARTH FAULT RELAY Issue Date Level B 27/05/1999 Initial issue. Summary of changes Due to RMS continuous product improvement policy
More informationMCRT 27000T Non-Contact WHEEL TORQUEMETERS (TORQUE WHEELS) Designing and Making the World s Best Torque Instruments Since 1960
Unprecedented Immunity to Contamination & Vibration Waterproof, Corrosion Resistant Construction Extraordinary Immunity to Extraneous Loads and Temperature Gradients 4 mv/v 4 mv/v Output Output or, ±5
More informationAMETEK Model PPC Series Electronic Pressure Calibrator
Specification Sheet CP-2176-0399 March 1999 Issue 1 AMETEK Model PPC Series Electronic Pressure Calibrator Two Models, Two Accuracies - PPC Accuracy +0.05% of Full Scale +1 LSD - PPCE Accuracy +0.04% of
More informationHI LPRC03 Advantage Hermetic Rocker Load Points
HI LPRC03 Advantage Hermetic Rocker Load Points HI LPRC03 Load Points with HI RCH03 and HI RCH04 Sensors HI LPRC03 ADVANTAGE low profile, rocker load point systems are specially designed for high capacity
More informationSystem 8. Digital Torque Tester. Our most accurate digital torque tester with Fail Safe Engineering! Page 48 Sturtevant Richmont
System 8 Digital Torque Tester Our most accurate digital torque tester with Fail Safe Engineering! Page 48 www.srtorque.com Sturtevant Richmont The ultimate in torque tool calibration. The SYSTEM 8 Digital
More informationSeries 7000 Torque Sensor for PTO-shafts
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional
More informationReadStar & CapStar Range Torque Readouts & Torque Testers. Crane Electronics Inc The force in torque management
ReadStar & CapStar Range Torque Readouts & Torque Testers Crane Electronics Inc The ReadStar range enables the measurement and collection of torque data. The ReadStar range comprises ReadStar II, ReadStar
More informationV-SENSOR LOW AIR VELOCITY SENSOR
home VSENSOR LOW AIR VELOCITY SENSOR Ultra low velocity pressure measurement Traceable Calibration Certificate Excellent repeatability Self compensating zero Climate chamber compensated Long term span
More information2-Color Display Digital Pressure Switch. Rated Pressure Metal Body Type (ISE75H) 2-color digital. Functions
Series ISE70/75/75H NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. For General Fluids For Air 2-Color Display (Green/Red) Selectable from four patterns ON Red Green Red Green
More informationINSTRUCTION MANUAL ANCHOR LOAD CELL. Model ANCLO
INSTRUCTION MANUAL ANCHOR LOAD CELL Model ANCLO Roctest Limited 2009. All rights reserved This product should be installed and operated only by qualified personnel. Its misuse is potentially dangerous.
More informationSeries 7000 Torque Sensor for PTO-shafts
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional
More information2-Color Display Digital Pressure Switch. NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. Rated Pressure Metal Body Type
Series ISE70/75/75H New NPN/PNP open collector 2 outputs added. Cut-to-zero display function added. For General Fluids For Air 2-Color Display (Green/Red) Selectable from four patterns ON Red Green Red
More informationTorque Wrenches
- 171 - Digital Torque Wrenches Digital Torque Wrenches The new AmPro digital torque wrenches are designed for simple and precise measurement of industrial, automotive, aerospace and many other applications.
More informationINSTALLATION, CALIBRATION & TROUBLESHOOTING MANUAL
INSTALLATION, CALIBRATION & TROUBLESHOOTING MANUAL Model 7200 Transducers GP:50 2770 Long Road, Grand Island, NY 14072 Tel: 716-773-9300 Fax: 716-773-5019 Email: sales@gp50.com Website: http://www.gp50.com
More informationCTR Series. Turbine low meters with conditioned output and built-in loading valve. Up to. Output Options. Features. Hydraulic measurement and control
CTR Series Turbine low meters with conditioned output and built-in loading valve Milwaukee, WI 323, USA Tel: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. PE27 3LZ, UK Tel: +44 (0) 1480 397 400
More informationLOADCELL HANDBOOK. Installation and Set-up manual (HLA N2K) 4 Core Standard Cable
LOADCELL HANDBOOK Installation and Set-up manual (HLA N2K) 4 Core Standard Cable Index 1. Load Cell Installation 2. HLA Amplifier Installation 3. Setting up 4. Specification Fig 1. Standard Load Pin Instillation
More informationOperation Manual For NDJ-9S Digital Rotary Viscometer
Operation Manual For NDJ-9S Digital Rotary Viscometer 1 Contents 1. General... 2 2. Main technical data... 2 3. Working principle... 2 4. Installation... 3 5. Operation procedures... 4 6. Precautions...
More informationBeck. The differential pressure transmitter for air with IP65
Beck. The differential pressure transmitter for air with IP65 Differential pressure transmitter 985 with IP65 General description The differential pressure transmitters of the 985 series are used to measure
More informationBeamex MB METROLOGY TEMPERATURE BLOCK. Portable temperature dry block delivering bath-level accuracy for industrial applications
Beamex MB METROLOGY TEMPERATURE BLOCK 87 Portable temperature dry block delivering bath-level accuracy for industrial applications Highly accurate temperature dry block 88 Portable temperature dry block
More informationUsing the LCT100 for Load Cell Troubleshooting
Using the LCT100 for Load Cell Troubleshooting In General The load cell sensor used to sense weight and force under a wide range of adverse conditions and various environment like; vibrations, high moisture
More informationModel B STRAIN GAGE LOAD CELL. Installation and Operating Manual
Model 1403-05B STRAIN GAGE LOAD CELL Installation and Operating Manual For assistance with the operation of this product,contact: PCB Load & Torque, Inc. Toll-free: 866-684-7107 24-hour SensorLine : 716-684-0001
More informationAdvanced Force / Torque Indicator
32-1128 Advanced Force / Torque Indicator The 5i advanced digital force / torque indicator is designed to work with a wide range of Mark-10 remote force and torque sensors (see page 3). With exclusive
More informationPursuing high precision, speed, and ease of use
Carbon/Sulfur Analyzers for Solid Materials EMIA series Pursuing high precision, speed, and ease of use Carbon / Sulfur Analyzer High-frequency induction furnace type EMIA-920V2/320V2 Series New EMIA-V2/FA
More informationPRESSURE BENCH OPERATING INSTRUCTIONS
PRESSURE BENCH OPERATING INSTRUCTIONS Overview: The pressure bench system allows the user to apply a variety of calibrated pressures to a variety of high and low pressure transducers. In addition the system
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
More informationInterface Webinar Wednesday. with Keith Skidmore
Interface Webinar Wednesday Torque 101 with Keith Skidmore www.interfaceforce.com 480 948 5555 Definitions What is a Torque Transducer? Rotary vs. Reaction Shaft vs. Flange Couplings Floating vs. Fixed
More informationpressure transducer Miniature pressure transducer model 81530
Section 8.1 8.2 8.3 High Pressure transducer model 8201 N Miniature pressure transducer model 81530 pressure transducer model 8221 Pressure Transducers 8103-8107 Pressure transducers / pressure transmitters
More informationDATAFLEX 42/1000 Torque Measuring Shaft Operating/Assembly instructions DATAFLEX
DATAFLEX 4/1000 1 of 1 DATAFLEX Torque measuring shaft type 4/1000 Drawn: 017-01-0 Shg/Koe Replaced for: dated 015-04-13 Verified: 017-01-0 Shg Replaced by: DATAFLEX 4/1000 of 1 DATAFLEX is a maintenance-free
More informationCHAPTER 4 VARIABLE COMPRESSION RATIO ENGINE WITH DATA ACQUISITION SYSTEM
57 CHAPTER 4 VARIABLE COMPRESSION RATIO ENGINE WITH DATA ACQUISITION SYSTEM 4.1 GENERAL The variable compression ratio engine was developed by Legion brothers, Bangalore, India. This chapter briefly discusses
More informationHand Held Pull Tester Instruction Manual Order No
Instruction Manual Order No. 63801-9700 Doc. No: TM-638019700 Release Date: 02-21-12 UNCONTROLLED COPY Page 1 of 13 Safety Warnings and Information Read and understand all of the instructions and safety
More informationXMLR400M1N75 Pressure sensors XMLR 400bar - G 1/4-24VDC V - NPN - M12
Characteristics Pressure sensors XMLR 400bar - G 1/4-24VDC - 0..10 V - NPN - M12 Main Range of product Product or component type Pressure sensor type Pressure switch type of operation Device short name
More informationXMLR400M1N26 Pressure sensors XMLR 400bar - 1/4" 18 NPT - 24VDC ma - NPN - M12
Characteristics Pressure sensors XMLR 400bar - 1/4" 18 NPT - 24VDC - 4..20 ma - NPN - M12 Main Range of product Product or component type Pressure sensor type Pressure switch type of operation Device short
More informationINSTRUMENTATION & CONTROL
Irrigation Controller.................... 172 Window Controller.................... 174 Water Meter Controller.................. 176 Digital Level Switch.................... 177 Filtration Controller Set..................
More informationSWB505 MultiMount. SWB605 PowerMount. Right the First Time Safe, Accurate, Service Friendly. Right the First Time
SWB505 MultiMount SWB605 PowerMount Right the First Time Safe, Accurate, Service Friendly Tank Weighing SWB505 MultiMount / SWB605 PowerMount weigh modules offer rugged construction and many features for
More informationMS2001L LPR Corrosion Monitor
MS2001L LPR Corrosion Monitor Metal Samples Company A Division of Alabama Specialty Products, Inc. 152 Metal Samples Rd., Munford, AL 36268 Phone: (256) 358 4202 Fax: (256) 358 4515 E mail: msc@alspi.com
More informationOEM Pressure Transmitters for heavy-duty applications Type MBS 1200 and MBS 1250
Data sheet OEM Pressure Transmitters for heavy-duty applications Type MBS 100 and MBS 150 The compact OEM pressure transmitter programme is designed for use in severe hydraulic applications. The programme
More informationTest Report Project Nr. 2013/020
PISTON Ltd. 1033 Budapest Szőlőkert u. 4./B HUNGARY Tel: Fax: http: Email: (361)-275-0033 (361)-275-0034 www.pistonmedical.com info@pistonmedical.com Test Report Project Nr. 2013/020 Name and address of
More informationDM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø
More informationWeb Tension Technology
Web Tension Technology GLT Web Tension Transducer Installation Instructions TM051 Rev. B - June, 2006 NOTICE BLH Nobel makes no representation or warranties of any kind whatsover with respects to the contents
More informationTorque Solutions HALTEC HALTEC HALTEC HALTEC HALTEC HALTEC HALTEC HALTEC. Digital Torque Wrenches
Digital Torque Wrenches ONBOARD FEATURES -Virtual progress bar & buzzer for torque signaling. -Data capture highlights all areas of over and under torque. -Device accuracy of +/- 1% of actual value. -Compare
More informationA22 / A6 MINIATURE FORCE SENSOR
1 A22 / A6 MINIATURE FORCE SENSOR MODEL A22 ; A6 COMPREHENSIVE ERROR % 0.1 OUTPUT SENSITIVITY mv/v 1.60 ± 0.16 NONLINEARITY %F.S 0.05 REPEATABILITY %F.S 0.05 HYSTERESIS %F.S 0.05 CREEP (5min)%F.S 0.1 ZERO
More informationProportional Solenoids
Proportional Solenoids The following electromagnets are examples for proportional solenoids realized in series. Magnetbau Schramme developments are customer-specific. If you are searching for the right
More informationMPT-250B SPECIFICATIONS AND OPERATING INSTRUCTIONS
1. SAFETY The MPT-250B Wire Crimp Pull Tester is a force measurement device, and as such should be operated with due caution. Operators should wear safety glasses for eye protection because the crimp under
More informationDigital Pressure Regulator Sentronic PLUS Series 614
Digital Pressure Regulator Sentronic PLUS Series 14 Installation manual IM149-/R01 CONTENTS 1. Description... 1.1 Catalogue number... 1. Operating elements...4 1. Operating modes...4. Electrical connection...5.
More informationThe FMM force tester can be controlled using L1 software for limit, cycling, hold and coefficient of friction testing.
FMM FMM may be used with L1 software or with a Starrett DFC or DFG digital force gage. FMM digital force testers are compact and ideal for highvolume, lean manufacturing production. FMM testers are available
More informationPressure transmitter for industrial applications Type MBS 4510
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for industrial applications Type MBS 4510 The high accuracy flush diaphragm pressure transmitter MBS 4510 is designed for use in non-uniform,
More informationkyalfa Laval Weighing Systems UltraPure with digital beam load cell
. kyalfa Laval Weighing Systems UltraPure with digital beam load cell Reliable and accurate digital beam load cells for process weighing Application The Alfa Laval digital beam load cells offer reliable
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0208 Valid Until Last Amended on
Last Amended on 12.08.2016 Page 1 of 7 I. DIMENSION (Basic Measuring, Gauge etc.) 1. CALIPER $ (Vernier / Dial / Digital) L.C.: 10 µm ф L.C.: 50 µm ф Upto 600mm 13 m Using Gauge Block Set Grade 0 (Carbide);
More informationTABLE OF CONTENTS 1. FEATURES SPECIFICATIONS... 1
TABLE OF CONTENTS 1. FEATURES... 1 2. SPECIFICATIONS... 1 3. FRONT PANEL DESCRIPTIONS... 3 3-1 Display...3 3-2 Power Switch... 3 3-3 ma ( Red ) Input Terminals...3 3-4 COM ( Black ) Input Terminals...3
More informationMELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c Voltage output The K7 Performance Level c series of Gefran are pressure transmitters for using in high temperature environment. The main characteristic
More informationSCHMIDT ManualPress. From 1.6 kn to 22 kn
SCHMIDT ManualPress From 1.6 kn to 22 kn Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual presses are often the
More informationSAE J1939 CAN compatible sensors for hydraulic system monitoring of flow, pressure and temperature on pumps, valves and hydrostatic transmissions
SAE J99 CAN compatible sensors for hydraulic system monitoring of flow, pressure and temperature on pumps, valves and hydrostatic transmissions Milwaukee, WI, USA Tel: + () 769-600 sales-us@webtec.com
More informationTorsion testing machine
WTT Series Metal Wire Torsion Tester Application: WTT Series Metal Wire Torsion Tester is mainly used to test the plasticity of metal wires and ropes under torsion condition. Surface flaws of steel wires
More informationRon 2000 Hook Type Crane Scale with Remote Indicator
Ron 000 Hook Type Crane Scale with Remote Indicator Exceptionally small dimensions enable minimum headroom loss. For example: Height of the t load cell is 3. inch / 4 mm Optional wireless communication
More informationSCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs.
SCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs. Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual
More informationPressure transmitter for general purpose Type MBS 1700 and MBS 1750
MAKING MODERN LIVING POSSIBLE Data sheet Pressure transmitter for general purpose Type MBS 1700 and MBS 1750 The compact pressure transmitters MBS 1700 and MBS 1750 are designed for use as a general purpose
More informationISOCAL - 6 Range Europa Venus Calisto
-45 to 250 C ACROSS RAngE ISOCAL - 6 Range Europa Venus Calisto g 35 x 160mm Calibration Volume g The Most Flexible Temperature Calibrator g S model includes Universal Input Temperature Indicator g Windows
More informationInstruction Manual. Rotating Torque Sensor Type 4501A. Version Q/QA (with standard square connections) Version R (with shaft ends)
Instruction Manual Rotating Torque Sensor Type 4501A Version Q/QA with standard square connections) Version R with shaft ends) Version H/HA with standard hexagon connections) 4501A_002-406e-01.14 Instruction
More informationSHOCK ABSORBER/DAMPER TESTING MACHINE
SHOCK ABSORBER/DAMPER TESTING MACHINE Dampening force of a shock absorber is directly proportional to velocity and this parameter needs to be precisely controlled. A small variation of 1mm in a stroke
More informationDART Charger Product Description, Information and Specification
g Digital Energy DART Charger Product Description, Information and Specification Document Number : PRPI-029 Version : 1.00 Revision : 2 Date : 03.02.11 Classification: NOTICE OF COPYRIGHT & PROPRIETARY
More informationIndustry 4.0 Is Unthinkable Without Calibration!
Industry 4.0 Is Unthinkable Without Calibration! The much-discussed Industry 4.0 cannot be implemented without a clear increase in automation solutions. At the same time, this development necessitates
More informationEB100 High Accuracy Miniature Pressure Transducer
Miniature design (body ø11 mm) High Accuracy EMI Protected per CE Compliance Wide Temperature Range Absolute DESCRIPTION The EB100 pressure transducer is the smallest design proposed by MEAS from the UltraStable
More informationInstruction Manual. Vibration Calibrator VC20. Manfred Weber. Metra Mess- und Frequenztechnik in Radebeul e.k. Meissner Str D Radebeul
Instruction Manual Vibration Calibrator VC20 Manfred Weber Metra Mess- und Frequenztechnik in Radebeul e.k. Meissner Str. 58 - D-01445 Radebeul Tel. +49-351 836 2191 Fax +49-351 836 2940 Email: Info@MMF.de
More informationInline Flow meter for compressed air and gases DN15 (1/2 ) - DN80 (3 )
EE771/EE772 Inline Flow meter for compressed air and gases DN15 (1/2 ) - DN80 (3 ) The inline flow meter EE771/EE772, based on the measurement principle of thermal mass flow, is ideally suited for the
More informationDPC300 FUME CUPBOARD CONTROLLER
home DPC300 FUME CUPBOARD CONTROLLER Ultra low face velcoity measurement Millisecond response time Excellent repeatability Total shut off and allround airtight Pressure independent from 5..750Pa Long term
More informationTORQUE CALIBRATION USING THE PROEDIT PROCEDURE WIZARD AND CALIBRATING USING PROCAL
TORQUE CALIBRATION USING THE PROEDIT PROCEDURE WIZARD AND CALIBRATING USING PROCAL - Overview Torque Calibration The Transmille 3000A Series torque calibration option uses the EA014 Torque adapter, a transducer
More informationFORCE SENSORS FORCE SENSORS
FORCE SENSORS We are a pioneer in the design and manufacture of precision force sensors for applications that require high performance or unique packaging, including electromechanical flight control, test
More informationMELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c Voltage output The K7 Performance Level c series of Gefran are pressure transmitters for using in high temperature environment. The main characteristic
More informationn Measuring ranges N to 0 5 kn n Especially flat design from 3.3 mm n Non-linearity 0.25 % of full scale
Subminiature Load Cell Model 8413 Model 8414 with overload protection Code: Delivery: Warranty: 8413 EN ex stock 24 months Application This miniature force sensor was optimised with respect to its height
More informationcontrol systems Made in Italy Integrated systems for the web tension regulation
control systems Integrated systems for the web tension regulation We know that producing quality laminates require very high web tension control. For this reason we provide a very wide range of integrated
More informationSelf Contained Weighing Module
Self Contained Weighing Module Model 9010 FEATURES Capacities 3-90kg Unique adjustable tare load cancelling mechanism Highly effective viscous damping 6 Built-in overload limit stops in three directions
More informationSLB415 Load Cell. Global Usage No Compromise on Performance. SLB415 Beam Load Cells Cost Efficient Solution
SLB415 Load Cell Global Usage No Compromise on Performance Floor Scales Use the SLB415 load cell in platform and floor scales. Due to the hermetic welded design reliability in most industrial environments
More informationVT-SENSOR AIR VELOCITY AND TEMP
home VTSENSOR AIR VELOCITY AND TEMP Ultra low velocity pressure measurement Traceable Calibration Certificate Excellent repeatability Self compensating zero Climate chamber compensated Long term span stability
More informationVerifying the accuracy of involute gear measuring machines R.C. Frazer and J. Hu Design Unit, Stephenson Building, University ofnewcastle upon Tyne,
Verifying the accuracy of involute gear measuring machines R.C. Frazer and J. Hu Design Unit, Stephenson Building, University ofnewcastle upon Tyne, Abstract This paper describes the most common methods
More information