JUST the stainless source for spec series faucets

Transcription

1 C O M P R E H E N S I V E S P E C I F I C A T I O N R E F E R E N C E G U I D E Commercial Grade & Residential Application Faucets and Accessories JUST the stainless source for spec series faucets j u s t m a n u f a c t u r i n g j u s t m f g. c o m

2 Table Of Contents Aerator and Handle Options 2 Scullery and Service Sink 9 Faucets and Pre-Rinse Backsplash Type Single Handle Mixing Faucet 3 Knee and Foot Pedal 9 Valves and Spouts COMMERCIAL & RESIDENTIAL FAUCETS Single Handle Faucets with 3 Gooseneck and High Rise Arc Spout Accessories Enviro Series Sensor Faucet 4 Gooseneck Faucets 4 Two Handle Mixing Faucets 5 J-35 Series Drains 10 No. 15 Series Drains 10 J-35 Series Remote Twist/ 11 Lavatory Drains, Standard Overflow, Elbow, Cast P-trap Two Handle Commercial Faucets 5 with High Rise Arc SWpouts/Triple Radius Spouts Continuous Waste System 12 Gooseneck Bar Faucets 5 ADA Compliant Drain Systems 12 and Insulators Kits Lavatory Faucets 6 Kitchen Accessories 13 Classroom Faucets, 7 Bubblers and Drains Hot Water Taps 13 Vandal Resistant Classroom 8 Faucets, Bubblers, Drains and Accessories Heaters 13 Visit Just Stainless Steel Sinks at 1

3 SPEC FAUCETS FOR TODAYS COMMERCIAL MARKET NEEDS CERTIFIED LEAD-FREE Beginning in 2010, only the lead-free plumbing components meeting the AB % lead standard could be sold in California. Vermont also recently passed bill S.152 which regulates the amount of lead in consumer products, similar to the California AB Vermont bill S.152 also prohibits the sale of plumbing fixtures whose wetted surfaces contain more than a weighted average of 0.25% lead. Many states are adopting similar standards. JUST Faucets are engineered to meet today s commercial ap pli ca tions in health care, ac a dem ic, hospitality, in sti tu tion al and in dus tri al ap pli ca tions. Architects and mechanical engineers recognize JUST quality and de pend abil i ty in harsh, high use environments. JUST offers a full line of market specific products meeting the wide range of to day s specifier needs. In addition to the line of com mer cial faucets, JUST produces a full line of specialty drains and fit tings. ADA Compliant, corrosion resistant, remote style, and vandal resistant features are all available in stock models. All JUST Faucets meet NSF-61. All Just Faucets are produced with a lifetime PVD Finish Supplied with a 2.2 GPM 80psi 1.5 GPM and 0.5 GPM aerator options. SINGLE HANDLE MIXING TYPE FAUCETS ADVANTAGE CARTRIDGE FEATURES Stainless steel valve assures long life and smooth, maintenance-free operation Washerless design resists wear because of absence of mechanical force Non-corrosive single handle device Built-in noise inhibitor Flow rate 2.2 GPM at 80 PSI ADVANTAGE CARTRIDGE DESIGN TWO HANDLE MIXING TYPE FAUCETS COMMERCIAL FAUCETS Replaceable seats Uniform Flow Packing provides constant flow All brass car tridge Brass quarter turn stem units Copper seats with replaceable re in forced packing AERATOR OPTIONS B JSA-450 JRS JRS-550 AERATOR LOW FLOW OPTIONS LF LFA-500 -A A-600 Swivel Aerator Duo stream model, spray or stream. Available as option on faucets specified. Specify B as suffix to mod el number. Rose Spray Available as option on faucets specified. Add JRS as suf fix to fau cet mod el num ber. Not available on all fau cets. Available on most faucets. 1.5 GPM 0.5 GPM Laminar Flow Available as op tion on faucets spec i fied. Add LFA as suffix to faucet model number. Vandal Resistant Includes special key wrench. Prevents unauthorized removal from faucet. Available as op tion on faucets spec i fied. Add -A as suf fix to fau cet model num ber. HANDLE OPTIONS LV LEVER HANDLES TR TEAR DROP HANDLES W WRIST BLADE HANDLES W4 W6 Pair of PVD chrome finished lever handles for faucets as noted. Add LV as suffix to faucet model number. Not available on all faucets. Pair of PVD chrome finished tear drop handles for faucets as noted. Add TR as suffix to faucet model number. Not available on all faucets. Pair of chrome plated cast brass handles color indexed hot/cold. Add W4 model number for 4 wrist blades. Add W6 for 6 wrist blades. 2

4 SINGLE HANDLE MIXING FAUCETS SPECIFICATIONS - SINGLE HANDLE MIXING FAUCETS These faucets feature triple plated polished PVD chrome finish, water saving aer a tor with 2.0 GPM flow rates, replaceable washerless valve cartridges and PVD chrome plated die cast lever handles. The faucets in this group conform to ANSI A and are ADA Com pli ant. Options: B, -A. (See page 1) J-900 J-902 J-906 Deck mounted washerless mixing faucet with escutcheon. 8 reach, brass swing spout. J-901 identical to J-900 except includes spray with hose. Deck mounted washerless mixing faucet with escutcheon. Includes hose with spray. Spray head mounted on escutcheon. 8 reach brass swing spout. Deck mounted washerless mixing faucet with 8 reach, brass swing spout. J-907 identical to J-906 except includes spray with hose. COMMERCIAL FAUCETS SINGLE HANDLE FAUCETS WITH GOOSENECK AND HIGH RISE ARC SPOUTS NEW PRODUCT DESIGN! J-990-LS Swivel Spout J-990-LS-R 70º Restricted Spout J-990-WF Swivel Spout Hi arc swivel gooseneck commercial grade remote single handle faucet. Stainless steel ball operation with 7-3/8 reach and 11 high spout. Matching chrome plated spray. Finish: PVD Chrome. Extended Stainless Steel flex lines with factory provided mounting tool for faster, easier installation. 2.2 GPM aerator. Hi arc swivel gooseneck commercial grade remote single handle faucet. Stainless steel ball operation with 7-3/8 reach and 11 high spout. Less spray. Finish: PVD Chrome. Extended Stainless Steel flex lines with factory provided mounting tool for faster, easier installation. 2.2 GPM aerator. Hi arc swivel gooseneck commercial grade remote single handle faucet. Stainless steel ball operation with 7-3/8 reach and 11 high spout. 70º restricted swing spout. Less spray. Finish: PVD Chrome. Vandal Resistant. Extended Stainless Steel flex lines with factory provided mounting tool for faster, easier installation. 2.2 GPM aerator. 70º Restricted Swing Spout ACCESSORIES JHDD-2000 Commercial grade stainless steel liquid soap dispenser. 34 fl. oz. ca pac i ty. Plunger and escutcheon are van dal resistant. Reservoir and shank high impact resistant ABS. JTM47 Thermostatic Mixing Valve Anti-Scald mixing valve with bronze body with integral check valves and adjustment cap with locking feature. 1/2 threaded union inlet and outlet connections. Temperature range from 60 to 120 F(16 C to 49 C). ASSE Standard 1016 Listed. AERATOR LOW FLOW OPTIONS Available on all faucets. 1.5 GPM 0.5 GPM 3

5 Enviro Series SENSOR FAUCETS AC = AC POWERED Plug-in power adapter with armored/vandal resistant output cable, 3/8 copper supply tube, in-line filter and mounting hardware. B = BATTERY POWERED Battery holder with (4) AA batteries, 3/8 copper supply tube, in-line filter and mounting hardware. JSL-46-AC or B JSGN-6-AC or B Sensor-operated backsplash mounted faucet. Chrome plated solid brass construction faucet body. Chrome plated spout 12-3/4 high from bottom of base (8-3/4 from base to aerator) with 5-3/8 reach. Laminar flow 2.0GPM aerator. Slow closing solenoid valve, piston-operated, provides reliable smooth operation without water hammer. In-line filter with clean-out trap. Sensor range adjustable from 6 to 30. Automatic time-out feature adjustable from 0 (presetactive until no activity sensored) up to 60 seconds in 15 second intervals. Shut-off delay adjustable to 0, 1(preset), 2,4 or 8 seconds. JSL-100-AC or B Deck mount, non-mixing, automatic faucet with chrome plated, solid brass construction (single hole punch required). Includes faucet, sensor assembly with armored/vandal resistant control cable, vandal and water resistant wall-mountable control box. 1.5 GPM vandal resistant laminar flow control as standard, 6V DC, slow-closing solenoid valve, 3/8 copper supply tube, in-line filter and mounting hardware. Single-hole deck mount, non-mixing automatic gooseneck faucet with chrome plated, solid brass construction. Includes faucet, sensor assembly with; Armored/vandal resistant control cable, wall mountable/vandal and water resistant control box, 6 gooseneck spout with 2.0 GPM laminar flow control, 6V DC, slow-closing solenoid valve, 3/8 copper supply tube, in-line filter and mounting hardware. Features preset/adjustable Sensor Beam Angle, sensor range is preset/adjustable, automatic time-out is preset at 0 seconds but also adjustable to 15, 30, or 60 seconds. Shut-off delay is preset at 1 second but adjustable up to 0, 2, 4, or 8 seconds. JSGN-6M-AC or B Deck mount, mixing, automatic gooseneck faucet with chrome plated, solid brass construction with built-in temperature control and manual override. COMMERCIAL FAUCETS Features preset/adjustable sensor beam angle. Sensor range is preset/adjustable, automatic timeout is preset at 30 seconds but also adjustable to 0, 15, or 60 seconds. Shut-off delay is preset at 1 second but adjustable up to 0, 2, 4, or 8 seconds. JSL-300-AC or B Sensor Deck mount, non-mixing, automatic faucet with chrome plated, solid brass 4 centerset construction, three hole punching required. Includes faucet, sensor assembly with; Armored/ vandal resistant control cable, vandal and water resistant wall-mountable control box, 0.5 GPM vandal resistant laminar flow control, 6V DC slow-closing solenoid valve. Includes faucet/sensor assembly with: Armored/vandal resistant control cable, wall mountable, vandal and water resistant control box, 8 gooseneck spout with 2.0 GPM Laminar Flow Control, 6V DC slow closing solenoid valve, plug-in power adapter with armored/vandal resistant output cable, two (2) 3/8 braided S.S. supply lines, two (2) in-line filter/check valves with two (2) 3/8 compression adapters and mounting hardware. Features preset/adjustable sensor beam angle; Preset/adjustable sensor range; Preset/adjustable time-out feature (0 preset, 15, 30, or 60 seconds); Preset/adjustable shut-off delay (Preset at 1 second but adjustable up to 8 seconds). NEW PRODUCT DESIGN! GOOSENECK FAUCETS SPECIFICATIONS - GOOSENECK FAUCETS The faucets in this group feature polished PVD chrome plate finish, solid cast brass bodies, water saving aerators, brass quarter turn quick compression stem units, re place able seat washers, and chrome plated cast brass han dles. The faucets in this group conform to ANSI A and are ADA Compliant. J-1174-KS JGN-740 JGN-750 Concealed mixing faucet with 5-1/2 reach, PVD chrome swiv el gooseneck spout with 2.2 GPM flow restricting aerator. 4 wrist blade han dles, color indexed hot and cold. Options: W6, B, JRS, -A, -H. J-1174-R identical to J-1174-KS, except with rigid, non-swiveling spout. Deck mount single hole gooseneck faucet with 4-15/16 reach, rigid spout and 2.2 GPM flow re stricting aer a tor. Handles are indexed H & C. Deck to top of spout 11-15/32. Deck to aerator 8-15/32. Options: W4, W6, B, JRS, -A, -H. Deck mount single hole gooseneck faucet with 6 1/2 swivel spout and 2.2 GPM flow re strict ing aerator. Handles are indexed H & C. Deck to top of spout 12-1/16. Deck to aerator 7-7/8. Options: W4, W6, B, JRS, -A, -H. 4

6 TWO HANDLE MIXING FAUCETS SPECIFICATIONS - TWO HANDLE MIXING FAUCETS These two handle mixing faucets feature polished PVD chrome finish, solid cast brass bodies, water saving aerator with 2.2 GPM flow rates, brass quar ter turn stem units, replaceable seats, and chrome plated die cast handles. The faucets in this group conform to ANSI A and are ADA Com pli ant. Options: W4, W6, B, -A, -H. (See page 1) JB-710 JV-1120-A JV-1122-A JV-174-A Deck mount mixing faucet. 10 reach, cast brass spout. Teardrop handles. Deck to top of spout 4-1/2. Deck to aerator 3-1/4. JB-700S identical to JB-710, except includes spray with hose. Deck mounted mixing faucet. 8 tube spout. Lever handles are indexed H & C. Deck mounted mixing faucet with 7-3/4 reach,pvd chrome finish brass spout.lever handles indexed H & C. JV-1123-A Identical to JV-1122-A, except includes spray with hose. Concealed mixing faucet. 7-3/4 PVD chrome finished brass spout. Lever handles are indexed H & C. JV-175-A identical to JV-174-A, except includes spray with hose. FAUCETS TWO HANDLE COMMERCIAL FAUCETS WITH HIGH RISE ARC SPOUTS/TRIPLE RADIUS SPOUTS SPECIFICATIONS - TWO HANDLE COMMERCIAL FAUCETS These faucets feature polished PVD chrome finish, water saving aerator with 2.2 GPM flow rates, brass quarter stem units, replaceable seats, cast brass bodies, and as chrome die cast teardrop handles. The faucets in this group conform to ANSI A and are ADA Com pli ant. Handle Options: Wrist blade-specify W4 for 4 or W6 for 6, Vandal Resistant-specify -H. Aerator options: Vandal Resistant-specify A, Rose Spray Aerator-specify JRS. Option details shown on page 1 of this catalog. JOL-400 JTR-50 JTR-51 Concealed offset faucet with 8-3/4 reach, high rise spout. Body with flexible hose connections. Deck to top of spout 11-5/8. Deck to aerator 10-5/8. JOL-401 identical to JOL-400, includes spray with hose. Deck mount mixing faucet. 6-5/8 reach, triple ra di us spout with cast brass support cone. Deck to top of spout 12-1/2. Deck to aerator 10. JTR-55 identical to JTR-50, includes spray with hose. Concealed faucet. 6-5/8 reach, triple ra di us spout with cast brass support cone. Deck to top of spout 12-1/2. Deck to aerator 10. JWF-100 JWF-200 Deck mounted faucet. 8-3/4 reach, high rise spout. Deck to top of spout 10-13/16. Deck to aerator 9-13/16. JWF-101 identical to JWF-100, includes spray with hose. Concealed faucet with 8-3/4 reach, high rise spout. Deck to top of spout 11-5/8. Deck to aerator 10-5/8. JWF-201 identical to JWF-200, includes spray with hose. GOOSENECK BAR FAUCETS SPECIFICATIONS - GOOSENECK BAR FAUCETS Two handle bar sink mixing faucets. Fea tur ing polished PVD chrome plate brass shell, cast brass bod ies, water saving aerator with 2.2 GPM flow rate. The faucets in this group conform to ANSI A and are ADA Com pli ant. JGN-4 JGN-5 5 Deck mounted mixing faucet with 3-7/8 reach, rigid gooseneck spout. Deck to top of spout 10-3/4. Deck to aerator 6-1/2. Re place able seats. Lever handles indexed H & C. Options: W4, W6, -A, -H. (See page 1) Deck mounted mixing fau cet with 3-7/8 swivel gooseneck spout. Deck to top of spout 10 3/4. Deck to aerator 6 1/2. Re place able seats. Lever handles indexed H & C. Op tions: W4, W6, -A, -H. (See page 1)

7 LAVATORY FAUCETS SPECIFICATIONS - COMMERCIAL FAUCETS These faucets feature a polished PVD chrome finish, wa ter saving aer a tor, chrome plat ed die cast handles, conform to ANSI A and are ADA Com pli ant. J-950 J-951 J-952 Deck mounted single control lavatory faucet with PVD chrome housing and lever handle. Replaceable washerless valve cartridge. Less drain. Flow rate 2.0 GPM maximum. Options: LRS, -A. Deck mounted single control lavatory faucet with PVD chrome housing and lever handle. Replaceable washerless valve cartridge. Includes pop-up drain. Flow rate 2.0 GPM. maximum. Options: LRS, -A. Deck mounted single control lavatory faucet with PVD chrome housing and lever handle. Includes cast brass grid drain and 1-1/4 tailpiece. Replaceable washerless valve cartridge. Flow rate 2.0 GPM maximum. Options: LRS, -A. FAUCETS JV-1137-DA J-ADA-952 JV-1139-A Lavatory centerset faucet with pop-up drain and 1-1/4 tail piece with PVD chrome finish. Solid cast brass body. Replaceable seats and aerator. Flow rate 2.2 GPM at 80 PSI. Op tions: W4, LRS, B, -A, -H, H/A. Deck mounted single control lavatory faucet with PVD chrome finish housing and lever handle. Includes cast brass grid drain and 1-1/4 tailpiece. Replaceable washerless valve cartridge. Flow rate 2.0 GPM max i mum. Options: LRS, -A. Lavatory centerset faucet less drain. Solid cast brass body Replaceable seats and aerator Flow rate 2.2 GPM at 80 PSI. PVD Chrome finish. Options: W4, LRS, B, -A, -H, H/A. AERATOR LOW FLOW OPTIONS (See page 2 for all options noted) Available on all faucets. 1.5 GPM 0.5 GPM 6

8 CLASSROOM FAUCETS SPECIFICATIONS - CLASSROOM FAUCETS Classroom faucets feature rigid spouts, or restricted swing spouts, providing preventative measures against wet counter tops in the class room. The faucets in this group conform to ANSI A and are ADA Compliant. Vandal resistant models are shown on page 7. JTR-51-R70 (restricted swing spout) ALL STAINLESS STEEL Twice as Strong as Brass! CLASSROOM SINK BUBBLER FAUCETS & BUBBLERS Concealed faucet. 6-5/8 triple radius spout. Arc of swing spout re strict ed to Polished Cast brass body. Chrome die cast teardrop han dles. Replaceable seats. 2.2 GPM flow re strict ing aerator. Deck to top of spout 12-1/2. Deck to aer a tor 10. Options: W4, W6, B, LRS,-A, -H, H/A. JGN-1A Deck mounted single supply with 4-11/16 reach, rigid goose neck spout and 2.2 GPM flow restricting aerator. PVD Chrome plated cast brass body with lever handle. Deck to top of spout 12-11/16. Deck to aerator 8-5/8. Re place able seats. Specify Hot H or Cold C. Options: W4, W6, -A, -H, H/A. JWF-200-R70 (restricted swing spout) Concealed faucet with 8-3/4 reach, high rise spout. Arc of swing spout re strict ed to Cast brass body with die cast tear drop han dles. Pol ished PVD chrome plated finish. Replaceable seats. 2.2 GPM flow re stricting aer a tor. Deck to top of spout 11-5/8. Deck to aer a tor 10-5/8. Options: W4, W6, B, JRS, -A, -H, H/A. J-1 Vandal resistant deck mounted single tap classroom faucet. Solid cast brass body with polished PVD chrome finish. Replaceable seats. Vandal resistant chrome plat ed die cast lever handle /16 high, 4 reach, rigid brass goose neck spout. 2.2 GPM vandal resistant flow restricting aerator. Options: LRS, -A, -H, H/A. J-990-LS-R 70º Restricted Spout JSB-10-FLX Flexible anti-microbial mouthguard self closing push button bub bler. Totally Lead Free con struc tion of type 304 stainless steel. Re place able stain less steel car tridge. Ad just able flow reg u la tor. 1/2-14 NPS shank. High ly buffed finish. Vandal resistant pin helps pre vent turn ing of fix ture. NSF.61 approved. NEW! CLASSROOM FAUCET JSF-5 Stainless faucet Deck mounted single handle ADA Compliant faucet. Features type 304 all stainless steel body, spout, handle and supply pipe and ceramic disc cartridge. Polished stainless mirror finish. Aerator integral to spout and vandal resistant. Aerator removable with proprietary faucet wrench. Deck to top of spout 14. Deck to aer a tor 9-3/4. ADA COMPLIANT DRAIN SYSTEMS J-ADA-35 Flexible Anti-microbial Mouthguard with self closing push button. NEW! 7 Hi arc RIGID gooseneck commercial grade remote single handle faucet. Stainless steel ball operation with 7-3/8 reach and 11 high spout. 70º restricted swing spout. Less spray. Finish: PVD Chrome. Vandal Resistant. Extended Stainless Steel flex lines with factory provided mounting tool for faster, easier installation. 2.2 GPM aerator. (See page 1 for all options noted) CLASSROOM SINK BUBBLERS JSB-10 Self closing push button bubbler. Type 304 stainless steel. Replaceable stainless steel cartridge. Ad just able flow regulator. 1/2-14 NPS male shank. Con forms to ANSI A ADA Com pli ant. High ly buffed finish. Vandal resistant models are shown on page 7. JBB-5 Self closing lever controlled offset bubbler. Solid cast brass body. Cast brass lever arm handle. Conforms to ANSI A ADA Com pli ant. 1/2-14 NPT male shank. Polished PVD chrome finish. Stainless steel cup strainer with removable stain less steel bas ket. 1-1/2 O.D. 17 gauge chrome plated brass offset tailpiece system. VANDAL RESISTANT DRAINS J-ADA-35-SSF- Stainless steel #35 flat grid vandal resistant drain. In cludes 1-1/2 O.D. stainless steel tailpiece 4 long.

9 VANDAL RESISTANT CLASSROOM FAUCETS JTR-51-R70- J-1 JWF-200-R70- Concealed faucet. 6-5/8 reach, triple radius spout. Arc of swing spout re strict ed to Cast brass body. Vandal resistant Die cast teardrop han dles. Replaceable seats. 2.2 GPM vandal re sis tant flow re strict ing aerator. Deck to top of spout 12-1/2. Deck to aerator 10. OP TIONS: W4, W6. Vandal resistant deck mounted single tap class room faucet. Solid cast brass body with polished PVD chrome finish. Re place able seats. Vandal re sis tant chrome die cast lever handle /16 high rigid brass goose neck spout. 2.2 GPM vandal resistant flow re strict ing aerator. Concealed faucet with 8-3/4 reach, high rise spout. Arc of swing spout re strict ed to Cast brass body with die cast vandal resistant tear drop handles. Pol ished PVD chrome finish. Replaceable seats. 2.2 GPM vandal resistant flow re strict ing aer a tor. Deck to top of spout 11-5/8. Deck to aerator 10-5/8. Options: W4, W6. Produced with lifetime PVD finish. (See page 1 for all options noted) VANDAL RESISTANT CLASSROOM BUBBLERS JSB-10- Stainless Steel JSB-10-FLX- Stainless Steel FAUCETS & BUBBLERS Self closing push button vandal resistant bub bler. Type 304 stainless steel. Re place able stain less steel car tridge. Ad just able flow reg u la tor. 1/2-14 NPS shank. High ly buffed finish. Vandal resistant pin helps pre vent turn ing of fixture. The JSB-10--FLX is the vandal resistant version of the JSB-10-FLX unit (see page 5). Features a smooth flexible anti-microbial mouthguard with smooth surface for easy cleaning. An integral pin at the base prevents turning of unit when used with slotted die formation supplied on the JUST Academic group of classroom sinks. VANDAL RESISTANT CLASSROOM DRAINS J-35-SSF- Stainless steel #35 flat grid vandal resistant drain. In cludes 1-1/2 O.D. stainless steel tailpiece 4 long. J-15-CB #15 Chrome plated brass vandal re sis tant drain. VANDAL RESISTANT ACCESSORIES JHDD-2000 Commercial grade stainless steel liquid soap dispenser. 34 fl. oz. ca pac i ty. Plung er and escutcheon are van dal resistant. Reservoir and shank high impact resistant ABS. 8

10 SCULLERY AND SERVICE SINK FAUCETS AND PRE-RINSE BACKSPLASH TYPE JS-47-TGSA JS-48-TA1 JS-48-TA1-DJ Backsplash mounted faucet with 4-1/16 reach, gooseneck spout with aer a tor. PVD Chrome cast brass body. Replaceable seats. 1/2-14 NPT male shank and adjustable flanges. Inlet center line to aerator 6-3/16. Inlet centerline to top of spout 10-3/16. OPTIONS: W4, W6, B, J-RS, -A. Backsplash mounted faucet with 7-7/8 reach, chrome plated tube spout. PVD Chrome cast brass body with lever handles. Re place able seats. 1/2-14 NPT male shank and adjustable flanges. Inlet center line to aerator 3-1/2. Inlet centerline to top of spout 5-11/16. OPTIONS: W4, W6, B, -A, -H. Backsplash mounted faucet with 15 PVD chrome plated double jointed tube spout with aerator. PVD chrome finish and cast brass body with lever handles. Re place able seats. 1/2-14 NPT male shank and adjustable flanges. Inlet cen ter line to aerator 5-5/16. Inlet centerline to top of spout 7-5/8. OPTIONS: W4, W6, B, -A, -H. JVB-1200 JPR-309 J-514 Backsplash mounted. PVD Chrome, cast brass bibb faucet with hose end spout. Adjustable flange. FAUCETS JLK-400 Heavy duty cast brass faucet assembly with rigid spout and vac u um breaker. Outlet with 3/4 hose thread, pail hook and top brace to wall with flange; distance from finish wall to outlet adjustable from 9 to 9-1/2. Heavy duty quick-compression quarterturn stems and replaceable seats; with screw driv er stops built into body. Lever handles. Polished PVD chrome finish. OPTIONS: W4, W6. JVBR-1201 identical to JVB-1200 except with rough chrome plated finish. A complete pre-rinse unit with mixing faucet to provide the correct water temperature. Assembly is used where a wall or backsplash connection is desired. Recommended where it is necessary to have no obstructions on sink top. Faucet has 8 centers with 1/2 IPS female eccentric flanged union inlets. The spring-action type gooseneck gives the user a wide range of cov er age. Unit is 34 high with 15 overhang and measures 5 from bottom of spray valve to centerline of faucet. Longer length hoses furnished on re quest. JLK-400 Heavy duty cast brass faucet assembly with rigid spout. Outlet with 1-1/6 hose thread, pail hook, and replaceable seats. Lever handles. Rough chrome PVD finish. OPTIONS: W4, W6. JPR-501 Commercial Grade Pre-Rinse Faucet NEW! (See page 1 for all options noted) FOOT PEDAL VALVES/KNEE VALVES/SPOUTS Single hole heavy cast body with spring action goosneck. Quarter turn ceramic disc cartridge. Brushed nickel finish. Heavy duty magnetic hose mount holds the spray head securely in place for hand washing use. Supplied with stainless steel braided hose and 20.5 reach. Overall 20.5 height. 7.5 bottom of spray valve to centerline of faucet body. JPRC-501 Same as above, but chrome plated. JS-10 JS-20 JFV-320 Wall mounted, chrome plated, rigid 6-7/8 reach, tubular gooseneck spout with aerator (5-7/8 from wall to outlet). 3/8 IPS connection. Includes lock nut. JFVC-301 floor mounted dual pedal operated self closing foot valves. 1/2 inlets on 1-1/4 centers. Polished chrome pedals with rough chrome valve body. 1/2 outlet. Deck mounted, chrome plated, rigid 9 reach, tubular goose neck spout with aerator (4 from wall to outlet). Includes locknut and coupling nut. JKV-400 Heavy Duty knee valve with cam-acting stirrup for mixing hot and cold water. Valve will maintain set position. 1/2 IPS straight loose key stops on inlets. 1/2 IPS female outlet at rear. Wall mounted, extra long double pedal valve, with renewable slow clos ing valve units. Pedals flip up and stay up to clear floor area for cleaning. 1/2 inlets and outlets on 1-1/4 centers. Base to centerline of inlets and out lets 1-5/8. Wall to tip of pedals approximately 14. Polished chrome fin ish. Loose key stops in inlets for shut-off and vol ume control. Includes unions, wall flang es. 9

11 J-35 SERIES DRAINS J-35 J-35-GS J-35-STP J-35-GS-STP J-35 Type 304 stainless steel crumb cup strainer with removable stain less steel basket with locking shell. Bas ket fitted with rubber stop per on bot tom. 1-1/2 O.D. chrome plat ed tailpiece, 4 long. J-35-STP Similar to J-35 drain above, except includes 1-1/2 O.D. type 304 stainless steel tailpiece, 4 long. J-35-GS Similar to J-35 drain above, except type 304 stainless steel ground seat stopper on bottom in place of rubber stopper. J-35-GS-STP Similar to J-35-GS drain above, except includes 1-1/2 O.D. type 304 stainless steel tailpiece, 4 long. J-35-FS J-35-SSF J-35-FS Chrome plated brass drain with flat strainer and 1-1/2 O.D. chrome plated brass tailpiece, 4 long. J-35-SSF Type 304 stainless steel drain body, stainless steel flat strain er and 1-1/2 O.D. stainless steel tailpiece, 4 long. J-35-SSF-316 Type 316 stainless steel drain body, flat strainer and 1-1/2 O.D. type 316 stainless steel tailpiece, 4 long. J-35-SS J-35-SSF-316 J-35-SS-316 J-35-SS Type 304 stainless steel drain with rubber stopper and 1-1/2 O.D. stainless steel tailpiece, 4 long. J-35-SS-316 Type 316 Stainless steel drain with rubber stopper and 1-1/2 O.D. type 316 stainless steel tailpiece, 4 long. JB-99 JB-99 Type 304 stainless steel drain from our Ballerina group. Fea tures removable heavy gauge basket strainer and 1-1/2 O.D. chrome plat ed brass tailpiece, 4 long. J J Type 316 stainless steel crumb cup strainer with re mov able stain less steel basket. Basket fitted with rubber stopper on bot tom. 1-1/2 O.D. type 316 stain less steel tailpiece, 4 long. J-35-GS-316 Type 316 stainless steel cup strainer with removable stain less steel basket. Basket fitted with type 316 stainless steel stop per on bottom. 1-1/2 O.D. type 316 stainless steel tailpiece, 4 long. J-35-SSW J-35-GS-316 J-35-SSW-316 J-35-SSW Type 304 stainless steel drain with 7 high stainless steel standpipe and 1-1/2 O.D. stainless steel tailpiece, 4 long. Includes rubber stop per. Al ter nate sized standpipes are available. J-35-SSW-316 Type 316 stainless steel drain with 7 high type 316 stainless steel standpipe and 1-1/2 O.D. type 316 stainless steel tailpiece, 4 long. In cludes rubber stop per. Alternate sized standpipes are avail able. DRAINS JV-35 JV-35-T JBRC-94 - Remote Handle JBRC-94 Type 304 stainless steel remote con trol drain with re mov able stainless steel cup strainer. 1-1/2 O.D. chrome plat ed brass tail piece, 4 long. JV-35 Stainless steel drain with removable stainless steel cup strain er. Strain er fitted with rubber stopper on bottom. Less tail piece. JV-35-T Stainless steel drain with removable stainless steel cup strain er. Strain er fitted with rubber stopper on bottom. 1-1/2 O.D. chrome plated tail piece, 4 long. JDP-35 - Drop Post/Grid Drain Sytem Chrome plated cast brass body and basket strainer with chrome plated brass basket and cast brass nuts. NO. 15 SERIES DRAINS J-15 J-15-SS J-15-SS-316 J-15 Chrome plated brass drain with rubber stopper. 1-1/2 O.D. chrome plat ed tail piece, 4 long. J-15-SS Type 304 stainless steel drain with rubber stopper. 1-1/2 O.D. stainless steel tail piece, 4 long. J-15-SS-316 Type 316 stainless steel drain with rubber stopper. 1-1/2 O.D. Type 316 stainless steel tailpiece, 4 long. J-15-CC J-15-CC Stainless steel crumb cup strainer with removable bas ket and 1-1/2 O.D. chrome plat ed tail piece, 4 long. J-15-FS J-15-SSF J-15-SSF-316 J-15-FS Chrome plated brass drain with flat grid strainer. 1-1/2 O.D. chrome plated tailpiece, 4 long. J-15-SSF Type 304 stainless steel drain with flat grid strain er. 1-1/2 O.D. stainless steel tailpiece, 4 long. J-15-SSF-316 Type 316 stainless steel drain with flat grid strain er. 1-1/2 O.D. Type 316 stainless steel tailpiece, 4 long. J-15-SSW J-15-SSW-316 J-15-SSW Type 304 stainless steel drain with 7 high stainless steel standpipe, and rubber stopper. 1-1/2 O.D. stainless steel tailpiece, 4 long. Alternate size standpipes available. J-15-SSW-316 Type 316 stainless steel drain with 7 high type 316 stainless steel standpipe, and rub ber stopper. 1-1/2 O.D. Type 316 stainless steel tail piece, 4 long. Alternate size standpipes available. 10

12 J-35 SERIES REMOTE TWIST/LEVER HANDLE DRAINS J-35-BLA-1-1/2 J-35-BLA-2 J-35-LAC-1-1/2 J-35-LAC-2 J-35-BLA /2 J-35-BLA J-35-BLA-CWO-1-1/2 J-35-BLA-CWO-2 J-35-BLA-1-1/2 Twist handle drain with chrome plated cast bronze body, stain less steel flat strain er, and 1-1/2 O.D. chrome plated brass tailpiece, 4 long. J-35-BLA-2 Twist handle drain chrome plated cast with bronze body, stainless steel flat strainer, and 2 O.D. chrome plated brass tailpiece, 4 long. J-35-LAC-1-1/2 Twist handle drain with bronze body, removable stainless steel basket, 1-1/2 O.D. chrome plat ed brass tail piece, 4 long. J-35-LAC-2 Twist handle drain with bronze body, removable stain less steel basket, 2 O.D. chrome plated brass tail piece, 4 long. J-35-BLA /2 Lever handle drain with cast Type 316 stainless steel body, Type 316 stainless steel flat strain er, and 1-1/2 O.D. stainless steel tail piece, 4 long. J-35- BLA Lever handle drain with cast Type 316 stainless steel body, Type 316 stainless steel flat strain er, and 2 O.D. type 316 stainless steel tail piece, 4 long. J-35-BLA-CWO-1-1/2 Twist handle drain with chrome plated cast bronze body, stainless steel flat strainer, and chrome plated brass overflow tube. 1-1/2 O.D. chrome plat ed brass tail piece, 4 long. Stainless steel over flow face. J-35-BLA-CWO-2 Twist handle drain with chrome plated cast bronze body, stain less steel flat strainer, and chrome plated brass over flow tube. 2 O.D. chrome plat ed brass tail piece, 4 long. Stainless steel over flow face. DRAINS LAVATORY DRAINS STANDARD OVERFLOW J-115-FS Chrome plated cast brass flat grid drain with 1-1/4 chrome plated 17 ga. tailpiece. For use with lavatory sinks with overflow. If over flow is not used, drain requires JSW-395 spacer and washer. JF-1535 Overflow assembly for use with standard J-15 and J-35 series drains. Overflow face diameter 2-5/8. Head nick el plated brass with stainless steel face plate. 1-1/4 nickel plat ed brass el bow 14 x18. Nickel plated brass T. Slip fit joint top and bot tom for 1-1/2 O.D. tubing. Includes nuts, gaskets, seal ing wash ers. 2 dia. hole required for head. Drain and tailpiece not in clud ed. JHL-12 Chrome plated overflow for use with J-115-FS drain. Specify bowl size being used ELBOW JSW-395 (Not Pictured) Spacer cup and washer when not using JHL-12 with J-115-FS. #11185 ELBOW Cast brass elbow, rough chrome plated finish. Use with JV-35 drain for undersink dishwasher installations. CAST P-TRAP 2 DIAMETER - CONTINUOUS WASTE 2 DIAMETER JT O.D. semi-cast, chrome plated brass P-trap with 17ga. wall bend. JCW continuous waste for double compartment food service or large capacity sinks. Chrome plated cast brass tees and slip nuts. 2 O.D. 17 gauge pol ished chrome tub ing and tailpiece. Threaded cast brass end run clean out plugs. End outlet. JCW continuous waste for triple compartment food service or large ca pac i ty sinks. cast brass tees and slip nuts. 2 O.D. 17 gauge polished chrome tub ing and tail piece. Threaded cast brass end run clean out plugs. End outlet. 11

13 CONTINUOUS WASTE SYSTEMS 1-1/2 J-52-S J-60-S J-290 Continuous waste for double compartment sinks. 1-1/2 O.D. chrome plated brass with slip fit connections at center outlet. Dimension from centerline-to-centerline of drain open ings must be spec i fied. Continuous waste for triple compartment sinks. 1-1/2 O.D. chrome plat ed brass with slip fit connections at center outlet. Dimension from centerline-to-centerline of drain open ings must be spec i fied. Continuous waste for triple compartment sinks. 1-1/2 O.D. chrome plat ed brass with slip fit connections at center outlet. Commonly used where different depth compartments are required. Dimension from centerline-to-centerline of drain open ings must be spec i fied. J-53-S J-76-S Continuous waste for double compartment sinks. 1-1/2 O.D. chrome plated brass with slip fit connections at end outlet. Dimension from centerlineto-centerline of drain open ings must be spec i fied. ADA COMPLIANT DRAIN SYSTEMS Continuous waste for triple compartment sinks. 1-1/2 O.D. chrome plat ed brass with slip fit connections at end outlet. Dimension from centerlineto-centerline of drain open ings must be spec i fied. ADA COMPLIANT DRAINS AND INSULATORS J-ADA-115-FS Polished, chrome plated flat grid lavatory drain. In cludes one piece 1-1/4 O.D. 17 gauge offset tailpiece. If over flow is not used, drain requires JSW-395 spacer and washer (not shown in catalog). J-ADA-35 Stainless steel cup strainer with removable stain less steel bas ket. 1-1/2 O.D. 17 gauge chrome plated brass offset tailpiece system. J-ADA-15-FS Chrome plated brass drain with flat grid strainer. 1-1/2 O.D. 17 gauge chrome plated brass off set tailpiece system. J-ADA-35-FS Chrome plated brass drain with flat strainer and 1-1/2 O.D. 17 gauge chrome plated brass off set tailpiece system. ADA COMPLIANT DRAIN INSULATOR KITS J-ADA-125 ADA Compliant, flame-retardant insulator, meets the F ther mal conductivity level and chemical resistance re quire ments of ADA. Easy snap together installation. Kit fully covers drain. Use with 1-1/4 O.D. drain systems (J-ADA-115-FS). J-ADA-150 ADA Compliant, flame-retardant insulator, meets the F ther mal conductivity level and chemical resistance re quire ments of ADA. Easy pull tie installation. Kit fully covers drain. Use with 1-1/2 O.D. drain systems (#35 type). 12

14 KITCHEN ACCESSORIES JSHC-1 HOLE COVER Stainless steel faucet hole cover. Used to cover unused 1-1/2 diameter hole punchings in sink ledge. Chrome finish. JBGF-1 GLASS FILLER Deck mounted pedestal glass filler. Chrome plate finish. Duo action, self closing and continuous flow. Deck to spout is 8. Deck to top of unit is 9-5/8. 3/8 IPS shank, with 3/8 tubing, sweat fitting. DISH DRAINER Dish and flatware strainer. Removable flatware drainer. Available in almond only. Available in 2 sizes: 13-1/2 x13 x5 and 17-1/2 x13-1/2 x5. KITCHEN ACCESSORIES - HOT TAPS - HEATERS HOT WATER TAPS JB3H-3 Instant hot water dispenser with gooseneck spout. 1/2 gallon tank, 100 cup per hour capacity. Includes copper water inlet tube and electrical plug-in. 120 volts, 10.8 amps, 1300 watts. O.D. of tank 6-1/16 x5-3/4 x11-13/32 high. Water temperature F. JDD-13-1/2x13 JDD-17-1/2x13-1/2 JB2H-2 Instant hot water dispenser with chrome plated faucet. 1/2 gallon tank, 60 cup per hour ca pac i ty. Includes copper water inlet tube and electrical plug-in. 115 volts, 50/60 cycle, 6.5 amps, 750 watts. O.D. of tank 6-1/16 x5-3/4 x11-13/32 high. Water temperature F. HEATERS JSSH kw, single phase, 208/240 volt, 50/60 cycle. Under com partment sanitizing water heater for compartments 16 to 18 square. Maintains water at 180ºF. Includes built-in controls, automatic shutoff, instructions, hose adapter, plug, gaskets and fittings. One drain opening required for sink, two additional drain opening required for heater. When ordering, please specify in which compartment heater is to be installed, and voltage required. Note: size recommendations based on 140ºF water supply with thirty minute pre-heat period to reach the sanitizing temperature. JSSH-39 identical to JSSH-34, except with 9kw, and is also avail able as 3 phase in addition to single phase. JSS-2 Heavy duty electric immersion heater 16-1/2 wide x 32-1/4 high. Stainless steel frame, with thermostat and low water safety shut-off. Includes 42 three conductor molded rubber cord and cap and 16 gauge nickel plated mounting clamp. Input 6.0 kw, 208 or 230 volts, please specify. Capable of raising water temperature from F to F in 20 minutes when mounted in 18 x 18 x14 deep compart ment. 13

15 INDEX MODEL NUMBER PAGE MODEL NUMBER PAGE MODEL NUMBER PAGE FAUCETS J J J J J J J J J J-990-LS 3 J-990-WF 3 J-1174-KS 4 J-1174-R 4 J-ADA JB-700-S 5 JB JGN-1AC 7 JGN-1AH 7 JGN-4 5 JGN-5 5 JGN JGN JLK JOL JOL JS-10 9 JS-20 9 JS-47-TGSA 9 JS-48-TA1 9 JS-48-TA1-DJ 9 JSF-5 7 JSGN-6-AC or B 4 JSGN-6M-AC or B 4 JSL-46-AC or B 4 JSL-100-AC or B 4 JSL-300-AC or B 4 JTR-50 5 JTR-51 5 JTR-51-R70 7 JTR-51-R70-8 JTR-55 5 JV-174-A 5 JV-175-A 5 JV-1120-A 5 JV-1122-A 5 JV-1123-A 5 JV-1137-DA 6 JV-1139-A 6 JVB J-1 7, 8 JWF JWF JWF JWF-200-R70 7 JWF-200-R70-8 JWF DRAINS and WASTES J-115-FS 11 J J-15-CB 8 J-15-CC 10 J-15-FS 10 J-15-SS 10 J-15-SSF 10 J-15-SSW 10 J-15-SS J-15-SSF J-15-SSW ELBOW 11 J J J-35-FS 10 J-35-GS 10 J-35-GS J-35-GS-STP 10 J-35-SS 10 J-35-SS J-35-SSF 10 J-35-SSF J-35-SSF- 8 J-35-SSW 10 J-35-SSW J-35-STP 10 J-35-BLA-1-1/2 11 J-35-BLA-2 11 J-35-BLA /2 11 J-35-BLA J-35-BLA-CWO-1-1/2 11 J-35-BLA-CWO-2 11 J-35-LAC-1-1/2 11 J-35-LAC-2 11 J-52-S 12 J-53-S 12 J-60-S 12 J-76-S 12 J J-ADA-115-FS 12 J-ADA-35 7, 12 J-ADA-35-FS 12 J-ADA-15-FS 12 J-ADA-35-SSF- 7 JB JBRC JCW JCW JDP JF JHL JT JV JV-35-T 10 BUBBLERS JBB-5 7 JSB-10 7 JSB-10-FLX 7 JSB-10-8 JSB-10-FLX- 8 KNEE / FOOT PEDAL VALVES JFVC JFV OPTIONS Lever Handles- LV 2 Tear Drop Handles- TD 2 Wrist Blade Handles W 2 Swivel Aerator B 2 Rose Spray Aerator 2 Lavatory Rose Spray Aerator 2 Vandal Resistant Aerator -A 2 Vandal Resistant Handles -H 2 A PRE-RINSE UNIT JPR JPR SOAP DISPENSER JHDD , 8 MISCELLANEOUS PARTS JB2H-2 13 JB3H-3 13 JBGF-1 13 JDD-13-1/2x13 13 JDD-17-1/2x13-1/2 13 JSHC-1 13 JSS-2 13 JSSH JSSH JTM47 3 INDEX 14

16 j u s t m a n u f a c t u r i n g k i n g s t r e e t f r a n k l i n p a r k, i l j u s t m f g. c o m