Applications. Standard Colors. Features. White. Blue

Size: px

Start display at page:

Download "Applications. Standard Colors. Features. White. Blue"

Hugh McDaniel
5 years ago
Views:

Applications Sports Facilities lighting (football field, golf course ) Main Thoroughfare lighting (airport, crossroad ) Wall & Billboard lighting

mechanical strength; Double-coupling IP68 protection, highest waterproof level; Ergonomic light distribution to achieve uniform illuminating effect;

1 Applications Sports Facilities lighting (football field, golf course ) Main Thoroughfare lighting (airport, crossroad ) Wall & Billboard lighting Standard Colors White Blue Black Gray Features Honeycomb briquette burning effect and the whole structure cooling technology; All metal structure, high mechanical strength; Double-coupling IP68 protection, highest waterproof level; Ergonomic light distribution to achieve uniform illuminating effect; Free modular serialization and full power range solution; Intelligent constant current driving technology to guarantee the safety of LED

2 HPWINNER s Technical Advantages Air Convection Effect Whole-structure Heat Dissipation Tool-less Maintenance Double-coupling IP68 Protection High-efficacy LED Light Source Flexible Combinations of

3 Electrical & Photometric Adopt Lumileds LEDs Model Input Voltage (V) Frequency Range (Hz) Drive Current (ma) Power (w) M1A/M2A Luminous Lumens Efficacy (lm) (lm/w) Luminous Efficacy (lm/w) M8B Lumens (lm) Power Factor Power Efficiency LED Brand CCT (k) CRI FL2C ±5 4200± ±5 4400± ±5 5000± ±5 5250± ±5 5700± ±5 6000± % FL2C ±5 8800± ±5 9200± ± ± ± ± ± ± ± ±600 FL2C ± ± ± ± ± ± ± ± ± ± ± ±900 FL2C ± ± ± ± ± ± ± ± ± ± ± ±1200 FL2C ± ± ± ± ± ± ± ± ± ± ± ±1500 FL2C-6 FL2C ± ± ± ± ± ± ± ± ±5 00± ± ± ± ± ± ± ± ± ± ± ± ± ± ±2100 Lumileds FL2C ± ± ± ± ± ± ± ± ± ± ± ±2400 FL2C ± ± ± ± ± ± ± ± ± ± ± ±3000 FL2C ± ± ± ± ± ± ± ± ± ±0 105± ±0 FL2C ± ± ± ± ± ± ± ± ± ± ± ±4200 FL2C ± ± ±5 70± ± ± ± ± ± ± ± ± For M1A/M2A modules, Luminous Efficacy of 3000K is 5% lower than other

4 Electrical & Photometric Adopt Customized Chips from World-leading Supplier Model Input Voltage (V) Frequency Range (Hz) Drive Current (ma) Power (w) M16 Luminous Efficacy (lm/w) Lumens (lm) Power Factor Power Efficiency LED Brand CCT (k) CRI 600(9P2S) ±8 4500± (14P2S) ±8 4740± (9P2S) ±8 5800±320 FL2C-1 800(14P2S) ±8 6120± (9P2S) ±8 6900± % 1000(14P2S) ±8 7350± (9P2S) ±8 7800± (14P2S) ±8 8400± (9P2S) ± ± (14P2S) ± ±640 FL2C (9P2S) ± ± (14P2S) ± ± (9P2S) ± ± (14P2S) ± ± (9P2S) ± ± (14P2S) ± ±960 FL2C (9P2S) ± ± (14P2S) ± ±1200 Customized (9P2S) ± ± (14P2S) ± ±1440 Chips from World-leading (9P2S) ± ±1280 Supplier (14P2S) ± ±1280 FL2C (9P2S) ± ± (14P2S) ± ± (9P2S) ± ± (14P2S) ± ± (9P2S) ± ± (14P2S) ± ±1600 FL2C (9P2S) ± ± (14P2S) ± ± (9P2S) ± ± (14P2S) ± ± (9P2S) ±8 00± (14P2S) ± ±1920 FL2C (9P2S) ± ± (14P2S) ± ± (9P2S) 135± ± (14P2S) 145±8

5 Electrical & Photometric Adopt Customized Chips from World-leading Supplier Model Input Voltage (V) Frequency Range (Hz) Drive Current (ma) Power (w) M16 Luminous Efficacy (lm/w) Lumens (lm) Power Factor Power Efficiency LED Brand CCT (k) CRI 800(9P2S) ± ± (14P2S) ± ±2240 FL2C (9P2S) ± ± (14P2S) ± ± (9P2S) ± ±3 1200(14P2S) ± ±3 800(9P2S) ± ± (14P2S) ± ±2560 FL2C (9P2S) ± ± (14P2S) ± ± (9P2S) ± ± (14P2S) ± ± (9P2S) ± ± (14P2S) ± ±3200 FL2C (9P2S) ± ± (14P2S) ± ± (9P2S) ± ±4800 Customized (14P2S) ± ± (9P2S) ± ±3840 Chips from World-leading (14P2S) ± ±3840 Supplier 5700 FL2C (9P2S) ± ± (14P2S) ± ± (9P2S) ± ± (14P2S) ± ± (9P2S) ± ± (14P2S) ± ±4480 FL2C (9P2S) ± ± (14P2S) ± ± (9P2S) ± ± (14P2S) ± ± (9P2S) ± ± (14P2S) ± ±5120 FL2C (9P2S) ± ± (14P2S) ± ± (9P2S) ± ± (14P2S) ±8

6 Working environment & Packing Model Product Dimensions (mm) Carton Size (mm) N.W (kg) G.W (kg) Working Environment Storage Temperature IP Rating Surge Protection LED Life Span (h) Housing Material FL2C-1 *200*95 430*265* FL2C-2 *200* *265* FL2C-3 *260* *335* FL2C-4 *260* *430* FL2C-5 ** *430* FL2C-6 ** *430* FL2C-7 ** *430* ~+50, 10%~90%RH. -40 ~+50 The Whole Fixture IP67 10 >50,000 Metal FL2C-8 ** *430* FL2C *410* *510* FL2C *490* *590* FL2C *570* *670* FL2C *650* *750* Note: Above data of weight are all typical values. Warranty 5-year limited warranty is standard on luminaire and

7 Light Distributions M1A LED module 00D1010 Beam Angle(50%) 110DEG T5S3040 Beam Angle(50%)

Light Distributions M2A LED module 12D1908 25D3725 40D3540 Beam Angle (50%) 12DEG Beam Angle(50%) 25DEG Beam

8 Light Distributions M2A LED module 12D D D3540 Beam Angle (50%) 12DEG Beam Angle(50%) 25DEG Beam Angle(50%) 40DEG 60D D D3030 Beam Angle (50%)60DEG Beam Angle(50%)90DEG Beam

Light Distributions M8B LED module 25D1325 40D5340 60D2 Beam Angle (50%) 25DEG Beam Angle (50%) 40DEG

9 Light Distributions M8B LED module 25D D D2 Beam Angle (50%) 25DEG Beam Angle (50%) 40DEG Beam Angle(50%) 60DEG 90D5390 Beam Angle(50%) 90DEG LBN1310 Beam Angle

10 Light Distributions M16B LED module 40D D D2190 Beam Angle(50%)40DEG Beam Angle(50%)60DEG Beam

11 Design Features External Design Features Front View Back View Installation Design

12 Design Features External Design Features Front View Back View Installation Design

13 Dimensions FL2C-1 FL2C-2 FL2C-3 FL2C-4 FL2C-5 FL2C-6 FL2C-7 FL2C-8 Mounting Hole FL2C-X Position of mounting hole between FL2C-1~FL2C-8 are the same.

14 FL2C Series Dimensions FL2C-10 FL2C-12 FL2C-14 FL2C-16 Mounting Hole ② Position of mounting hole between FL2C-10~FL2C-16 are the same. FL2C-X② Tel: Fax: HPWINNER Page14

screws (provided by customer) at the bracket. 2.

Fix the luminary onto the mounting surface with M12

Loosen the two M10x40 screws at bracket joint. 4.

15 Installation FL2C-8 1. Fix the luminary onto the mounting surface with M10 screws (provided by customer) at the bracket. 2. Connect to the AC power cable (make sure it sufficiently grounded). 3. Loosen the two M10x30 screws at bracket joint. 4. Set the lamp to the correct angle. 5. Tighten up the screws. Installation finished. FL2C Fix the luminary onto the mounting surface with M12 screws (provided by customer) at the bracket. 3. Connect to the AC power cable (make sure it sufficiently grounded). 3. Loosen the two M10x40 screws at bracket joint. 4. Set the lamp to the correct angle. 5. Tighten up the screws. Installation

Maintenance Driver & Electrical Parts FL2C-8 1.

6. Disconnect the driver from the connector to modules. 7.

16 Maintenance Driver & Electrical Parts FL2C-8 1. Loosen the two M10x30 screws at bracket joint. Put the bracket down. 2. Unscrew the eight M4x10 screws to open the back cover. 3. Take the back cover from the lamp. 4. Unscrew the two M4x16 cross recessed pan head screws on the cable clip. 5. Unscrew the two M4x10 screws at the ends of the driver set. 6. Disconnect the driver from the connector to modules. 7. Take the connector out through the hole. 8. Replace the failed driver set with a new one. 9. Connect and tighten up each part back step by step. Maintenance

FL2C-16 1. Loosen the two M10x40 screws at bracket joint. Put the bracket down.

Raise the mounting bracket of drivers. 5.

Unscrew the two M4x16 cross recessed pan head screws on the cable clip. 7.

17 FL2C Loosen the two M10x40 screws at bracket joint. Put the bracket down. 2. Unscrew the four M10x30 screws on the both ends of the mounting bracket of drivers. 3. Unscrew the four M5x8 screws on the top of the mounting bracket of drivers. 4. Raise the mounting bracket of drivers. 5. Disconnect the driver from the connector to modules. 6. Unscrew the two M4x16 cross recessed pan head screws on the cable clip. 7. Unscrew the four M4x10 screws at the ends of the driver set. 8. Replace the failed driver set with a new one. 9. Connect and tighten up each part back step by step. Maintenance

5. Unscrew the four M5x12 screws at the two sides of the

Unscrew the two M4x10 screws at both ends of the failed

18 Maintenance Modules FL2C-8 1. Loosen the two M10x30 screws at bracket joint. Put the bracket down. 2. Unscrew the eight M4x10 screws to open the back cover. 3. Take the back cover from the lamp. 4. Disconnect the module from the connector to the drivers. 5. Unscrew the four M5x12 screws at the two sides of the side covers. 6. Take the side covers from the lamp. 7. Unscrew the two M4x10 screws at both ends of the failed module. 8. Replace the failed module set with a new one. 9. Connect and tighten up each part back step by step. Maintenance

FL2C-16 1. Loosen the two M10x40 screws at bracket joint.

Unscrew the four M10x30 screws on the both ends of the mounting

Unscrew the four M5x8 screws on the top of the mounting bracket

Disconnect the driver from the connector to modules.

Unscrew the eight M4x10 screws to open the back cover above the

Take the connector out through the hole. 7.

Unscrew the two M5x12 screws on the side covers. 9.

19 FL2C Loosen the two M10x40 screws at bracket joint. Put the bracket down. 2. Unscrew the four M10x30 screws on the both ends of the mounting bracket of drivers. 3. Unscrew the four M5x8 screws on the top of the mounting bracket of drivers. 4. Disconnect the driver from the connector to modules. Put aside the mounting bracket of drives. 5. Unscrew the eight M4x10 screws to open the back cover above the failed module. 6. Take the back cover from the lamp. Take the connector out through the hole. 7. Disconnect the module from the connector. 8. Unscrew the two M5x12 screws on the side covers. 9. Unscrew the two M5x12 screws on the front panel. Take the front panel from the lamp. 10. Unscrew the two M4x10 screws at both ends of the failed module. 11. Replace the failed module set with a new one. 12. Connect and tighten up each part back step by step. Maintenance

Back View Front View FL2C Series Connectors

Female #2 Indicatrix: Female #3 Indicatrix: Female

female #2 and #3, and the gap between male and

connectors are well connected; otherwise, there

When the gap between male and female terminals is

20 Back View Front View FL2C Series Connectors Operation Guide Indicatrix: Female #1 Indicatrix: Female #2 Indicatrix: Female #3 Indicatrix: Female #4 Male Indicatrix Spin the male terminal clockwise. When the male indicatrix points between indicatrix female #2 and #3, and the gap between male and female terminals is extremely small, the connectors are well connected; otherwise, there will be risks in its waterproof performance. When the gap between male and female terminals is extremely small, if any looseness can be sensed, please spin the male terminal clockwise until

21 Ordering Information Example: FL2CS-2-100GY-M1L IN Ordering Information FL 2C S GY - M1 L IN Luminary Type T: Street light TS: Tunnel light TF: High bay light FL: Flood light GL: Garden light 2. Luminary Series 1A 1B 1D 1F 2A 2C 3A 3B 3. Driving Current Blank/N: 700mA S: >700mA 4. Module Qty N: Non-modular luminary 1: 1 module 2: 2 modules 3: 3 modules 4: 4 modules 5. System Power 10: 10W 20: 20W 30: 30W 40: 40W 50: 50W 6. Housing Color BK: Black WH: White GY: Grey SR: Silver BU: Blue BUWH: Blue top & White base BUGY: Blue top & Grey base OTH: Other 7. Module Series Blank: Non-modular luminary M1: M1 module M2: M2 module M5: M5 module 8. LED Brand X: Customized LEDs L: LUMILEDS C: CREE O: OSRAM N: NICHIA S: SAMSUNG 9. Lens Code CRI 6: 60 7: 70 8: 80 9: 90 OTH: Other 11. CCT 30: 3000K 40: 4000K 50: 5000K 57: 5700K 12. Driver Brand MO: MOSO MW: MEAN WELL PH: PHILIPS IN: INVENTRONICS AD: ADAYO OTH: Other *Ordering information is for reference only. Some product configurations are not available. Please consult Specifications for specific product availability and for further details. Revision History Change Rev. Description of Change Date Item From To 2016/06/01 Rev1.0 Datasheets Release / / 2016/08/20 Rev1.1 M16B /

Application. Standard Colors. Features. - Tunnel lighting. Black

Application. Standard Colors. Features. - Tunnel lighting. Black 齐全 TS3A Series Application - Tunnel lighting Standard Colors Grey White Black Features - Honeycomb briquette burning effect and the whole structure cooling technology; - Double-coupling IP68 protection,