SANITARY EQUIPMENT BUYER S GUIDE

Transcription

1 SANITARY EQUIPMENT BUYER S GUIDE Sanitary equipment for unloading direct from original shipping containers PROCESS EQUIPMENT PROVEN QUALITY. LEADING TECHNOLOGY.

2

3 Table of Contents Sanitary Pumps Selection Guide FDA Pumps Husky Husky Husky Husky 2150 Pump Package Husky 3150 Pumps A SF SB Ordering Info and Technical Specs Drum Unloader BES Monark 5: Monark 5:1 Pump Package Senator 4: Senator 4:1 Pump Package Bulldog 10: Bulldog 10:1 Pump Package BES Ram Plates Accessories Hydra-Clean Notes SANITARY EQUIPMENT CATALOG 1

4 Cleaner, Safer, Faster. If your production process means working with thick, heavy ingredients up to 1,000,000 centipoise we re there with the solutions. Graco sanitary equipment is ideal for a wide range of applications: tote; drum and pail evacuation; batching of ingredients into processing kettles, vats and mixers; package filling; and food product assembly spraying. HUSKY 3150 PUMPS MONARK PUMPS HUSKY FDA AND PACKAGES AND PACKAGES Models Husky 1040 FDA Husky A Monark 5:1 Pump Husky 1590 FDA Husky 3150 SB and Package Husky 2150 FDA Husky 3150 SF Typical Fruit juice Pie filling Peanut butter Application Frozen concentrate Potato salad Fruit juice Mayonnaise Milk products Corn syrup Tomato paste Muffin batter Cookie filling Corn syrup Fruit juice Moist pet food Jam and jelly Cheese spreads Jam and jelly Icing Pizza sauces Fruit paste Reference Page Get Connected. All of the information you need about Graco sanitary products in one location! The following resources are now available online: Brochures, flyers, manuals and catalogs Product selector Presentations and videos Operation and disassembly animations Visit 2 SANITARY EQUIPMENT CATALOG TYPICAL APPLICATIONS

5 SENATOR PUMPS BULLDOG PUMPS BIN AND PACKAGES AND PACKAGES UNLOADERS HYDRA-CLEAN Senator 4:1 Pump Bulldog 10:1 Pump BES 300 President 10:1 and Package and Packages BES 3150 Bulldog 10:1 Premier 34:1 Frozen concentrate Peanut butter Tomato sauce Water Shortening Tomato paste Mustard Detergent solutions Pizza sauce Shortening Peanut butter Chemical solutions Cream cheese Dough conditioners Liquid eggs Mayonnaise Ricotta cheese Cheese spreads Moist pet food Moist pet food Tomato paste Corn syrup Caramel Jelly Try Graco s Husky Pumps for FREE*! Look for the Try Before You Buy logo Try Before you Buy Features 60 day free customer trial 90 day distributor dating No arm twisting, no hidden clauses, no questions Send it back at the end of the trial for a full refund Must arrive at Graco before the end of the 90 day period to avoid non-payment Day 1 is shipment date of product from Graco Distributor to clean product (remove hazardous/toxic materials) prior to shipping *May not be available in all geographic areas. SELECTION GUIDE SANITARY EQUIPMENT CATALOG 3

6 Husky 1040 FDA Sanitary Pump This FDA-Compliant pump is constructed of 316 stainless steel with a in (38 mm) Tri-Clamp connection. The center section is available in aluminum or stainless steel. The Husky FDA is an on-demand pump; by closing the outlet or dispense valve, the pump will stop until flow is again required. Features and Benefits All fluid contact materials are FDA-Compliant and meet the United States Code of Federal Regulations (CFR) Title 21 FDA pumps have an epoxy-coated, aluminum center section. FDA Plus pumps have a 316 stainless steel center section. Seats, balls and diaphragms are available in a wide range of food grade elastomers Patented dual cup air valve one of the most reliable air valves in the market Husky 1040 FDA External controller for optional remote operation Typical Application Moving very flowable materials Evacuating food process mixing kettles Transferring ingredients from original containers to mixing tanks Evacuating liquid concentrates from shipping tankers to holding vessels Typical Fluids Handled Fruit juice Sauce Wine Oil Husky 1040 FDA Plus Fruit puree Corn syrup Lanolin alcohol Paste and starch Mineral oil Glycol 4 SANITARY EQUIPMENT CATALOG HUSKY 1040 FDA

7 Husky 1040 FDA Sanitary Pump Technical Specifications Maximum fluid working pressure psi (8.4 bar, 0.84 MPa) Maximum free flow delivery* gpm (151 lpm) Maximum pump speed cpm Displacement per cycle** gallon (0.57 liter) Maximum suction lift (D7S888) ft (5.48 m) wet or dry Maximum size pumpable solids in (3.2 mm) Maximum diaphragm ball and seat operating temperature ratings*** PTFE ºF (104.4ºC) 12.8 in (325 mm) 7.2 in (183 mm) Air Inlet 1/2 npt(f) 12.3 in (312 mm) 1-1/2 in Outlet Sanitary Flange 15.3 in (389 mm) Santoprene ºF (82.2ºC) Buna-N ºF (82.2ºC) 9.9 in (251 mm) Viton ºF (121ºC) Typical sound level at 70 psi air (0.49 bar, 4.9 MPa) 50 cpm dba Maximum air consumption scfm (1.7 m3/min) Air pressure operating range to 120 psi (1.4 to 8.4 bar, 0.14 to 0.84 MPa) Air inlet size /2 npt(f) 2.0 in (51 mm) Air Exhaust (muffler included) 3/4 npt(f) 5.5 in (140 mm) 3/8-16 Threads 1-1/2 in Inlet Sanitary Flange Fluid inlet & outlet size /2 in (38.1 mm) Tri-Clamp Weight (with aluminum center section) lb (16 kg) Overall Width = 9.2 in (233 mm) Mounting Hole Width = 5.0 in (127 mm) Weight (with SST center section) lb (22 kg) Instruction manual * Flow rates are with muffler and do not vary based on diaphragm material ** Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type *** Actual pump performance may be affected by prolonged usage at temperature Ordering Information FDA FDA Plus Aluminum Center Section Stainless Steel Center Section Standard Remote Standard Remote Materials for Materials for Materials for Fluid Air Air Air Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Kit Control* D7S311 D8S311 DRS311 DSS311 Stainless Steel w/ PTFE Seal PTFE PTFE D D7SB11 D8SB11 DRSB11 DSSB11 Stainless Steel w/ Viton Seal PTFE PTFE D07B D7S666 D8S666 DRS666 DSS666 Santoprene w/ PTFE Seal Santoprene Santoprene D D7SC66 D8SC66 DRSC66 DSSC66 Santoprene w/ Viton Seal Santoprene Santoprene D07C D7S377 D8S377 DRS377 DSS377 Stainless Steel w/ PTFE Seal Buna Buna D D7SB77 D8SB77 DRSB77 DSSB77 Stainless Steel w/ Viton Seal Buna Buna D07B D7S388 D8S388 DRS388 DSS388 Stainless Steel w/ PTFE Seal Viton Viton D D7SB88 D8SB88 DRSB88 DSSB88 Stainless Steel w/ Viton Seal Viton Viton D07B D7S766 D8S766 DRS766 DSS766 Buna Santoprene Santoprene D D7S777 D8S777 DRS777 DSS777 Buna Buna Buna D D7S811 D8S811 DRS811 DSS811 Viton PTFE PTFE D D7S866 D8S866 DRS866 DSS866 Viton Santoprene Santoprene D D7S888 D8S888 DRS888 DSS888 Viton Viton Viton D *Air control includes air regulator and filter with gauge HUSKY 1040 FDA SANITARY EQUIPMENT CATALOG 5

8 Husky 1590 FDA Sanitary Pump This FDA-Compliant pump is constructed of stainless steel with a 2 in (50.8 mm) Tri-Clamp connection. The center section is available in aluminum or stainless steel. The Husky FDA is an on-demand pump; by closing the outlet or dispense valve, the pump will stop until flow is again required. Features and Benefits All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21 FDA pumps have an epoxy-coated, aluminum center section. FDA Plus pumps have a 316 stainless steel center section. Seats, balls and diaphragms are available in a wide range of food grade elastomers Patented dual cup air valve one of the most reliable air valves in the market External controller for optional remote operation Typical Application Moving fluids ranging from slow moving to very flowable Evacuating food process mixing kettles Transferring of ingredients from original containers to mixing tanks Evacuating liquid concentrates from shipping tankers to holding vessels Repackaging fluids from original containers to smaller receptacles Typical Fluids Handled Concentrated fruit juices Wine Jam & jelly Corn syrup Lanolin alcohol Pudding Pizza paste Oil Paste and starch Mineral oil Glycol Chocolate Husky 1590 FDA Husky 1590 FDA Plus 6 SANITARY EQUIPMENT CATALOG HUSKY 1590 FDA

9 Husky 1590 FDA Sanitary Pump Technical Specifications Maximum fluid working pressure psi (8.4 bar, 0.84 MPa) Maximum free flow delivery* gpm (378.5 lpm) Maximum pump speed cpm Displacement per cycle** gallon (1.96 liter) Maximum suction lift (DBS888) ft (5.48 m) wet or dry Maximum size pumpable solids in (4.8 mm) Maximum diaphragm operating temperature*** PTFE ºF (104.4ºC) Santoprene ºF (82.2ºC) 16.8 in (427 mm) 9.0 in (229 mm) 2 in Outlet Sanitary Flange Air Inlet 1/2 npt(f) 16.3 in (414 mm) 20.0 in (508 mm) Buna-N ºF (82.2ºC) Viton ºF (121ºC) 11.8 in (300 mm) Typical sound level at 70 psi air (4.9 bar, 0.49 MPa) 50 cpm dba Maximum air consumption scfm (3.5 m3/min) Air pressure operating range to 120 psi (1.4 to 8.4 bar, 0.14 to 0.84 MPa) Air inlet size /2 npt(f) Fluid inlet & outlet size in (50.8 mm) Tri-Clamp Weight (with aluminum center section) lb (32.7 kg) Weight (with SST center section) lb (40 kg) Instruction manual * Flow rates are with muffler and do not vary based on diaphragm material. ** Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type *** Actual pump performance may be affected by prolonged usage at temperature 2.4 in (61 mm) Air Exhaust (muffler included) 3/4 npt(f) 6.0 in (152 mm) 3/8-16 Threads 2 in Inlet Sanitary Flange Overall Width = 12.3 in (312 mm) Mounting Hole Width = 6.0 in (152 mm) Ordering Information FDA FDA Plus Aluminum Center Section Stainless Steel Center Section Standard Remote Standard Remote Materials for Materials for Materials for Fluid Air Air Air Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Kit Control* DBS311 DCS311 DTS311 DUS311 Stainless Steel w/ PTFE Seal PTFE PTFE D0B DBSB11 DCSB11 DTSB11 DUSB11 Stainless Steel w/ Viton Seal PTFE PTFE D0BB DBS666 DCS666 DTS666 DUS666 Santoprene w/ PTFE Seal Santoprene Santoprene D0B DBSC66 DCSC66 DTSC66 DUSC66 Santoprene w/ Viton Seal Santoprene Santoprene D0BC DBS377 DCS377 DTS377 DUS377 Stainless Steel w/ PTFE Seal Buna Buna D0B DBSB77 DCSB77 DTSB77 DUSB77 Stainless Steel w/ Viton Seal Buna Buna D0BB DBS388 DCS388 DTS388 DUS388 Stainless Steel w/ PTFE Seal Viton Viton D0B DBSB88 DCSB88 DTSB88 DUSB88 Stainless Steel w/ Viton Seal Viton Viton D0BB DBS766 DCS766 DTS766 DUS766 Buna Santoprene Santoprene D0B DBS777 DCS777 DTS777 DUS777 Buna Buna Buna D0B DBS811 DCS811 DTS811 DUS811 Viton PTFE PTFE D0B DBS866 DCS866 DTS866 DUS866 Viton Santoprene Santoprene D0B DBS888 DCS888 DTS888 DUS888 Viton Viton Viton D0B *Air control includes air regulator and filter with gauge HUSKY 1590 FDA SANITARY EQUIPMENT CATALOG 7

10 Husky 2150 FDA Sanitary Pump This FDA-Compliant pump is constructed of 316 stainless steel with a 2-1/2 in (63.5 mm) Tri-Clamp connection. The center section is available in aluminum or stainless steel. The Husky FDA is an on-demand pump; by closing the outlet or dispense valve, the pump will stop until flow is again required. Features and Benefits All fluid contact materials are FDA-compliant and meet the United States Code of Federal Regulations (CFR) Title 21 FDA pumps have an epoxy-coated, aluminum center section. FDA Plus pumps have a 316 stainless steel center section. Seats, balls and diaphragms are available in a wide range of food grade elastomers Patented dual cup air valve one of the most reliable air valves in the market. External controller for optional remote operation Typical Application Moving fluids ranging from very slow moving to very flowable Evacuating food process mixing kettles Husky 2150 FDA Transferring ingredients from original containers to mixing tanks Evacuating liquid concentrates from shipping tankers to holding vessels Typical Fluids Handled Concentrated fruit juice Wine Jam & jelly Corn syrup Thick sauce Chocolate Tomato paste Oil Paste and starch Glycol Pudding Fruit filling Husky 2150 FDA Plus 8 SANITARY EQUIPMENT CATALOG HUSKY 2150 FDA

11 Husky 2150 FDA Sanitary Pump Technical Specifications Maximum fluid working pressure psi (8.4 bar, 0.84 MPa) Maximum free flow delivery* gpm (568 lpm) Maximum pump speed cpm Displacement per cycle** gallon (3.90 liter) Maximum suction lift (DFS888) ft (5.48 m) wet or dry Maximum size pumpable solids in (6.3 mm) Maximum diaphragm operating temperature*** PTFE ºF (104.4ºC) Santoprene ºF (82.2ºC) Buna-N ºF (82.2ºC) 18.9 in (480 mm) 10.2 in (259 mm) 2-1/2 in Outlet Sanitary Flange Air Inlet 1/2 npt(f) 27.3 in (693 mm) 22.3 in (566 mm) Viton ºF (121ºC) Typical sound level at 70 psi air 16.2 in (411 mm) (4.9 bar, 0.49 MPa) 50 cpm dba Maximum air consumption scfm (4.9 m3/min) Air pressure operating range to 120 psi (1.4 to 8.4 bar, 0.14 to 0.84 MPa) Air inlet size /2 npt(f) Fluid inlet & outlet size /2 in (63.5 mm) Tri-Clamp Weight (with aluminum center section) lb (50.8 kg) Weight (with SST center section) lb (61 kg) Instruction manual Air Exhaust (muffler included) 3/4 npt(f) 3.5 in (89 mm) 6.5 in (165 mm) 2-1/2 in Inlet Sanitary Flange 3/8-16 Threads Overall Width = 12.5 (318 mm) Mounting Hole Width = 6.0 in (152 mm) * Flow rates are with muffler and do not vary based on diaphragm material ** Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type *** Actual pump performance may be affected by prolonged usage at temperature Ordering Information FDA FDA Plus Aluminum Center Section Stainless Steel Center Section Standard Remote Standard Remote Materials for Materials for Materials for Fluid Air Air Air Valve Air Valve Air Valve Air Valve Seats Balls Diaphragms Kit Kit Control* DFS311 DGS311 DVS311 DWS311 Stainless Steel w/ PTFE Seal PTFE PTFE D0G DFSB11 DGSB11 DVSB11 DWSB11 Stainless Steel w/ Viton Seal PTFE PTFE D0GB DFS666 DGS666 DVS666 DWS666 Santoprene w/ PTFE Seal Santoprene Santoprene D0G DFSC66 DGSC66 DVSC66 DWSC66 Santoprene w/ Viton Seal Santoprene Santoprene D0GC DFS377 DGS377 DVS377 DWS377 Stainless Steel w/ PTFE Seal Buna Buna D0G DFSB77 DGSB77 DVSB77 DWSB77 Stainless Steel w/ Viton Seal Buna Buna D0GB DFS388 DGS388 DVS388 DWS388 Stainless Steel w/ PTFE Seal Viton Viton D0G DFSB88 DGSB88 DVSB88 DWSB88 Stainless Steel w/ Viton Seal Viton Viton D0GB DFS766 DGS766 DVS766 DWS766 Buna Santoprene Santoprene D0G DFS777 DGS777 DVS777 DWS777 Buna Buna Buna D0G DFS811 DGS811 DVS811 DWS811 Viton PTFE PTFE D0G DFS866 DGS866 DVS866 DWS866 Viton Santoprene Santoprene D0G DFS888 DGS888 DVS888 DWS888 Viton Viton Viton D0G * Air control includes air regulator and filter with gauge HUSKY 2150 FDA SANITARY EQUIPMENT CATALOG 9

12 Husky 2150 FDA Sanitary Pump Package This FDA-compliant pump features work-on-demand capability. By closing the outlet or dispense valve, the pump will stop until flow is again required. The Husky 2150 is capable of emptying a drum in less than 1 minute when pumping somewhat flowable fluids. Features and Benefits Evacuation rates of up to 50 gpm, running at 60 cycles per minute 120 psi (8.4 bar, 0.84 MPa), outlet pressure Unique to air-operated pumps, all packages work-on-demand and do not require special controls to shut pump off when fluid line is shut off Improved plate design with inflatable wiper seals, allows for faster change-out of drums Packages fully assembled and tested prior to shipment All pumps and packages are compliant to specific agency standards Available packages designed to fit 21.5 in (54.6cm), 22.5 in (57.1cm), 23.0 in (58.42cm) and in (59.06cm) 55-gallon container sizes Packages capable of pumping from straight-sided fiber drums, chimed metal drums, and tapered plastic drums Typical Application Unloading of somewhat flowable fluids, from the original 55-gallon containers without the need to reduce the viscosity through liquid injection Typical Fluids Handled Fruit juice concentrate Sauce Tomato paste Light chocolate Fruit puree 10 SANITARY EQUIPMENT CATALOG PUMP PACKAGES

13 Husky 2150 FDA Sanitary Pump Package Ordering Information Part Pump Pump Style Plate Flat bottom Inflatable Seal Ram Former Package Weight Number Number Number Plate Size Number Number Number FDA 15C " (54.6 cm) 15B NA lb. (DFS666) (243.6 kg) FDA 15C " (54.6 cm) 15B NA lb. (DFS888) (249.5 kg) FDA 15C " (57.1 cm) 15B NA lb. (DFS666) (243.6 kg) FDA 15C " (57.1 cm) 15B NA lb (DFS888) Please note: Pump is configured as noted, but is center-ported and has no inlet manifold (249.5 kg) Technical Specifications Maximum fluid pressure psi (8.4 bar, 0.84 Mpa) Maximum 60 cpm* gpm (234 lpm) Maximum 100 cpm* gpm (390 lpm) Viscosity range of package ,000 to 20,000 cps Maximum inlet air pressure psi (8.4 bar, 0.84 MPa) Air inlet size /4 npt (f) Evacuation efficiency % Instruction manual * Flow rates based on full displacement of lower and S.G. = 1 Dimensions A = 107 in (271.8 cm) raised B = 67 in (170.2 cm) lowered C = 20 in (50.8 cm) D = 24 in (61.0 cm) A B E = 38 in (96.5 cm) F = 42 in (106.7 cm) G = 43.7 in (111.1 cm) E G F C D PUMP PACKAGES SANITARY EQUIPMENT CATALOG 11

14 Husky A Sanitary Pump With the highest flow capacity of any air-operated double diaphragm pump certified by 3A, the Husky A is designed to meet the stringent sanitation requirements of the milk/dairy industry. It offers flow rates up to 150 gpm (567.8 lpm). Mounted on a floor stand and equipped with a leak detector, the A can be rotated 185 degrees to drain any excess sanitation chemicals used in the CIP process. Features and Benefits Stainless steel fluid ends, meet or exceed a 32 Ra finish and can be disassembled in 5 minutes or less 316 Stainless steel center section and air valve offer lube-free operation Over molded Buna-N food-grade elastomer Husky A available with 1.5, 2, 3 and 4 Tri-Clamp connections Electronic leak detector is standard on the A models All models covered by Graco s 5/15 year warranty Typical Application Designed for milk and dairy industries Husky A Typical Fluids Handled Sour cream Ice cream Milk Yogurt Light-viscosity cheeses Pharmaceutical lotions Graco is authorized to continue to apply the 3-A Symbol to the models of equipment, conforming to 3-A Sanitary Standards for: Husky 3150 Sanitary Diaphragm Pumps SA1AAA, SA2AAA, SA3AAA, SA4AAA, SA5AAA, SA1AFA, SA2AFA, SA3AFA, SA4AFA, SA5AFA. Visit for a copy of Graco s 3-A Certificate. 12 SANITARY EQUIPMENT CATALOG HUSKY A

15 Husky 3150 SF Sanitary Pump For materials and fluid streams containing large solids or chunks, which clog a ball-designed pump or are damaged by the pumping action. The Husky 3150 SF easily pumps larger solids and will pass up to 2.5 in (63.5 mm) solid without crushing or damaging the product. Features and Benefits Easily converted to flapper design with optional conversion kit Flapper (2.5 ) passes large solids/chunks with ease without damaging product or clogging pump Stainless steel fluid ends, meet or exceed a 32 Ra finish and can be disassembled in 5 minutes or less 316 Stainless steel center section and air valve offer lube-free operation Santoprene, Buna-N, Viton and PTFE food-grade elastomers Husky 3150 SF comes standard with 3 and 4 Tri-Clamp connections All models are available as stand-mounted or in 55-gallon or 300-gallon unloader packages Electronic leak detector is optional on the SF models All models covered by Graco s 5/15 year warranty Husky 3150 SF (Sanitary Flapper) Typical Application Transferring ingredients that contain large solids or chunks from original containers to mixing tanks for producing condiments, sauces, fruit pies and pastry products Typical Fluids Handled Apple or cherry pie filling Spaghetti sauce with meat Blueberry muffin batter Grapes with and without stems Raspberries Potato salad Pickle relish Chunky salsa HUSKY 3150 SF SANITARY EQUIPMENT CATALOG 13

16 Husky 3150 SB Sanitary Pump For applications that benefit from the convenience of quick knock down design, but may not require leak detection. The 3150 SB ball design passes solids up to 1 in (25 mm) in diameter. The ease of disassembly of the fluid ends, large porting, and high flow capacity, makes the Husky 3150 SB the perfect pump for your high volume application needs. Features and Benefits Easily converted to flapper design with optional conversion kit Stainless steel fluid ends, meet or exceed a 32 Ra finish and can be disassembled in 5 minutes or less 316 Stainless steel center section and air valve offer lube-free operation Santoprene, Buna-N, Viton and PTFE food-grade elastomers Husky A or SB are available with 1.5, 2, 3 and 4 Tri-Clamp connections Available as stand-mounted or in 55-gallon or 300-gallon unloader packages Optional electronic leak detector is available on all SB models Covered by Graco s 5/15 year warranty Typical Application High volume and high flow applications that benefit from a quick knock down diaphragm pump design Moving fluids ranging from very slow moving to very flowable Husky 3150 SB (Sanitary Ball) Evacuating liquid concentrates from shipping tankers to holding vessels Typical Fluids Handled Fruit juice Jams and jellies Corn syrup Tomato sauces Flowable cheese spreads Pizza sauces Tomato paste Icing Salsa Fruit purees 14 SANITARY EQUIPMENT CATALOG HUSKY 3150 SB

17 Husky 3150 Technical Specifications and Ordering Information Technical Specifications Maximum fluid working pressure psi (8.4 bar, 0.84 MPa) Maximum free flow delivery* gpm (568 lpm) Maximum suction lift Flapper ft (3.5 m) wet Ball ft (5.5 m) wet Maximum size of pumpable solids Husky A in (25.4 mm) Husky 3150 SB in (25.4 mm) Husky 3150 SF in (63.5 mm) Maximum diaphragm operating temperature PTFE ºF (104.4ºC) Santoprene ºF (82.2ºC) Buna-N ºF (82.2ºC) Viton ºF (121ºC) Typical sound level at 70 psi air (4.9 bar) 50 cpm dba Air pressure operating range to 120 psi (1.4 to 8.4 bar, 0.14 to 0.84 MPa) Air inlet size /2 npt(f) Fluid inlet & outlet size Tri-Clamp connections (size determined by part number) Weight Husky A lb Husky 3150 SB lb Husky 3150 SF lb Instruction manual * Flow rates are with muffler and do not vary based on diaphragm material. Displacement per cycle may vary based on suction condition, discharge head, air pressure and fluid type Ordering Information Husky A** Inlet/ Diaphragm/ Part No. Type Outlet Size Ball Material SA1AAA 3A Approved 1.5 x 1.5 Over molded Buna-N SA2AAA 3A Approved 2 x 2 Over molded Buna-N SA3AAA 3A Approved 3 x 3 Over molded Buna-N SA4AAA 3A Approved 4 x 4 Over molded Buna-N SA5AAA 3A Approved 3 x 2 Over molded Buna-N **Leak Detector comes standard on all A models Husky 3150 SB Inlet/ Diaphragm/ Part No. Type Outlet Size Ball Material SB2AA1 Ball Check 2 x 2 Over-molded Buna-N SB3AA1 Ball Check 3 x 3 Over-molded Buna-N SB2111 Ball Check 2 x 2 PTFE SB3111 Ball Check 3 x 3 PTFE SB2661 Ball Check 2 x 2 Santoprene SB3661 Ball Check 3 x 3 Santoprene SB2771 Ball Check 2 x 2 Buna-N SB3771 Ball Check 3 x 3 Buna-N SB2881 Ball Check 2 x 2 Viton SB3881 Ball Check 3 x 3 Viton Husky 3150 SF Inlet/ Diaphragm/ Part No. Type Outlet Size Ball Material SF31F1 Flapper 3 x 3 PTFE SF41F1 Flapper 4 x 4 PTFE SF36F1 Flapper 3 x 3 Santoprene SF46F1 Flapper 4 x 4 Santoprene SF37F1 Flapper 3 x 3 Buna-N SF47F1 Flapper 4 x 4 Buna-N SF38F1 Flapper 3 x 3 Viton SF48F1 Flapper 4 x 4 Viton HUSKY 3150 SANITARY EQUIPMENT CATALOG 15

18 Husky 3150 Drum Unloader Sanitary Package The Husky 3150 Drum Unloader evacuates viscous products from their original 55-gallon containers without dilution. Unloader packages come standard with an inflatable ram plate seal, which minimizes seal leakage and allows quick replacement of the empty container. The available packages will empty 21.5, and 23 fiber, 22.5 metal, and plastic tapered drums. With flow rates up to 100 gpm, extremely fast evacuation rates are possible. Typical Fluids Handled Tomato paste Light peanut butter Heavier ointments Icing Frostings Technical Specifications Maximum fluid pressure psi (8.4 bar, 0.84 MPa) Maximum 60 cpm* gpm (234 lpm) Maximum 100 cpm* gpm (390 lpm) Viscosity range of package ,000 to 20,000 cps Maximum inlet air pressure psi (8.4, 0.84 MPa) Air inlet size /4 npt(f) Evacuation efficiency % Instruction manual *Flow rates based on full displacement of lower and S.G.=1 Ordering Information Diaphragm/ Part No. Type Plate Size Outlet Size Ball Material Ball 21 1/2 (546 mm) 3 (76 mm) PTFE Ball 22 1/2 (572 mm) 3 (76 mm) PTFE Flapper 21 1/2 (546 mm) 3 (76 mm) PTFE Flapper 22 1/2 (572 mm) 3 (76 mm) PTFE 16 SANITARY EQUIPMENT CATALOG HUSKY 3150 DRUM UNLOADER

19 Husky 3150 BES Sanitary Package The Husky 3150 BES (Bin Evacuation System) evacuates viscous products from their original 300-gallon containers without dilution. Standard with an inflatable ram plate seal, the 3150 BES minimizes seal leakage and allows quick replacement of the empty container. An all-pneumatic version is available for applications that do not require metering or batch control and an electronic version is available for those applications that do. Equipped with two pumps and flow rates up to 100 gpm each, bin evacuation times of less than three minutes are possible. Pumps, cylinders and ram plates are all made of 316 stainless steel. Typical Fluids Handled Tomato paste Light peanut butter Heavier ointments Icing and frostings Technical Specifications Maximum fluid pressure psi (8.4 bar, 0.8 MPa) Maximum 60 cpm* gpm (468 lpm) Maximum 100 cpm* gpm (780 lpm) Viscosity range of package ,000 to 20,000 cps Maximum inlet air pressure psi (8.4 bar, 0.84 MPa) Air inlet size /4 npt(f) Evacuation efficiency % * Flow rates are with muffler and do not vary based on diaphragm material. Ordering Information Pump Bin Outlet Diaphragm/ Instruction Part No. Type Manufacturer Controls Size Ball Material Manual Ball Plywood Pneumatic 3 (76 mm) PTFE Ball Plywood Electronic/ 3 (76 mm) PTFE Pneumatic Note: Contact process marketing for ordering information on non-plywood bins. HUSKY 3150 BES SANITARY EQUIPMENT CATALOG 17

20 Monark 5:1 Bare Pump This USDA and 3A-approved, quick knock down pump is constructed of 316 stainless steel, with a in (38 mm) sanitary tube flange outlet. The Monark 5:1 is an on-demand pump; by closing the outlet or dispense valve, the pump will stop until flow is again required. Features and Benefits Flow to 4.0 gpm (15.1 lpm) Maximum fluid pressure of 600 psi (41 bar; 4.1 MPa) Monark air motor includes a 10-year warranty Available in double-ball and priming piston designs Typical Application Fluid transfer and supply of low to medium viscosity fluids Typical Fluids Handled Fruit juice Corn syrup Mascara base Jam and jelly Pizza sauce Icing 18 SANITARY EQUIPMENT CATALOG MONARK 5:1

21 Monark 5:1 Bare Pump Ordering Information Part Pump Pump Length Pump Inlet Number Type Description Type Packings Weight Double Ball Drum Length 2-1/8" (53.9 mm) Slotted Buna & UHMWPE 33.0 lb (14.9 kg) Double Ball Drum Length 2-1/8" (53.9 mm) Slotted PTFE 36.3 lb (16.4 kg) Double Ball Stubby 1-1/2" in (38.1 mm) Clamp Buna & UHMWPE 25.0 lb (11.3 kg) Double Ball Stubby 1-1/2" in (38.1 mm) Clamp PTFE 33.0 lb (14.9 kg) Priming Piston Stubby 2" (50.8 mm) Priming Piston Buna & UHMWPE 24.4 lb (11.0 kg) Double Ball Stubby 2" (50.8 mm) ACME Thread Buna & UHMWPE 19.9 lb (9.0 kg) Technical Specifications Fluid to air pressure ratio :1 Maximum fluid pressure psi (41 bar, 4.1 MPa) Maximum fluid flow at 100 cpm gpm (15.1 lpm) Maximum fluid flow at 60 cpm gpm (9.5 lpm) Volume per cycle gal (0.15 liter) Maximum operating temperature F (93 C) Maximum size pumpable solids in (0.32 cm) Maximum air input pressure psi (8.2 bar; 0.8 MPa) Air inlet size /8 npt(f) Fluid outlet size in (38 mm) Tri-Clamp Instruction manual Dimensions Overall Air Motor Air Motor Inlet to Part Number Length (A) Height (B) Base (C) Outlet (D) in in in in (144.2 cm) (29.9 cm) (114.3 cm) (93.2 cm) in in in in (144.2 cm) (29.9 cm) (114.3 cm) (93.2 cm) in in in in (90.8 cm) (29.9 cm) (60.9 cm) (40.3 cm) in in in in (90.8 cm) (29.9 cm) (60.9 cm) (40.3 cm) in in in in (90.9 cm) (29.9 cm) (60.9 cm) (38.3 cm) in in in in (90.9 cm) (29.9 cm) (58.9 cm) (38.3 cm) D B C A MONARK 5:1 SANITARY EQUIPMENT CATALOG 19

22 Monark 5:1 Sanitary Pump Package The USDA and 3A-approved pumps feature a work-on-demand capability. By closing the outlet or dispense valve, the pump will stop until flow is again required. Features and Benefits Evacuation rates of up to 4gpm 600 psi (41 bar, 4.1 MPa), outlet pressure Unique to air-operated pumps, all packages work-on-demand and do not require special controls to shut pump off when fluid line is shut off Improved plate design with inflatable wiper seals, allows for faster change-out of drums Available in double ball and priming piston design for additional system flexibility Packages fully assembled and tested prior to shipment All pumps and packages compliant to specific agency standards Available packages designed to fit 21.5 in (54.6 cm), 22.5 in (57.1 cm), 23.0 in (58.42cm) and in (59.06 cm) 55-gallon container sizes All packages capable of pumping from straight-sided fiber drums, chimed metal drums, tapered plastic drums, and polyliner drums Typical Application Unloading of somewhat flowable to moderately flowable fluids, from the original 55-gallon containers without the need to reduce the viscosity through liquid injection Typical Fluids Handled Mascara base Tomato paste Icing Jam and jelly Pharmaceutical lotion 20 SANITARY EQUIPMENT CATALOG MONARK 5:1

23 Monark 5:1 Sanitary Pump Packages Ordering Information Part Pump Pump Conical Plate Inflatable Ram Former Pkg Number Number Style Plate Number Size Seal Number Number Number Weight Priming Piston 15B " (54.6 cm) 15B lb (213.1 kg) Priming Piston 15B " (57.1 cm) 15B lb (214.1 kg) Double Ball 15B " (54.6 cm) 15B lb (214.1 kg) Double Ball 15B " (57.1 cm) 15B lb (215.0 kg) Technical Specifications Double Ball Pump Priming Piston Maximum fluid pressure 600 psi (41 bar, 4.1 MPa) 600 psi (41 bar, 4.1 MPa) Maximum 60 cpm* 2.5 gpm ( 9.5 lpm) 2.5 gpm ( 9.5 lpm) Maximum 100 cpm* 4 gpm (15.1 lpm) 4 gpm (15.1 lpm) Viscosity range of package 25,000 to 60,000 cps 60,000 to 100,000 Maximum inlet air pressure 120 psi (8.4 bar, 0.84 MPa) 120 psi (8.4 bar, 0.84 MPa) Air inlet size 3/4" npt(f) 3/4" npt(f) Evacuation efficiency 98% 98% Instruction manual * Flow rates based on full displacement of lower and S.G. = 1 Dimensions A = 107 in (271.8 cm) raised B = 67 in (170.2 cm) lowered C = 20 in (50.8 cm) D = 24 in (61.0 cm) E = 38 in (96.5 cm) F = 42 in (106.7 cm) G = 43.7 in (111.1 cm) A B E G F C D MONARK 5:1 SANITARY EQUIPMENT CATALOG 21

24 Senator 4:1 (FT-14) Bare Pump The USDA-approved FT-14 is a quick knock down pump constructed of 316 SST with a 2 in (50.8 mm) Tri-Clamp outlet. It can be fit into open-head drums or directly inserted into a 4.5 in (114 mm) closed-head drum bung. The FT-14 is an on-demand pump; by closing the outlet or dispense valve, the pump will stop until flow is again required. Features and Benefits Maximum flow 23 gpm (87 lpm) Maximum pressure 400 psi (28 bar; 2.8 MPa) Available in double-ball and priming piston designs Typical Application Fluid transfer and supply of low to medium viscosity fluids Typical Fluids Handled Concentrated fruit juice Jam and jelly Tomato paste/pizza sauce Icing Mascara base Corn syrup 22 SANITARY EQUIPMENT CATALOG SENATOR 4:1 (FT-14)

25 Senator 4:1 (FT-14) Bare Pump Ordering Information Part Pump Pump Length Pump Inlet Number Type Description Type Packings Weight Double Ball Drum Length 4" (10.2 cm) Slotted Buna, PTFE, UHMWPE 127 lb (57.6 kg) Double Ball Stubby 4" (10.2 cm) Slotted Buna, PTFE, UHMWPE 95 lb (43.0 kg) (Ram Package) Priming Piston Drum Length 4" (10.2 cm) Priming Piston Buna, PTFE, UHMWPE 95 lb (43.0 kg) (Ram Package) Double Ball Stubby 90 degree elbow, Buna, PTFE, UHMWPE 83 lb (37.6 kg) (CIP capable) 3" (7.6 cm) Clamp Double Ball Drum Length 4" (10.2 cm) Clamp Buna, PTFE, UHMWPE 86 lb (39.0 kg) (BES mount) Technical Specifications Fluid to air pressure ratio :1 Maximum fluid pressure psi (28 bar; 2.8 MPa) Maximum fluid flow at 100 cpm gpm (87 lpm) Maximum fluid flow at 60 cpm gpm (53 lpm) Volume per cycle gal (0.87 liter) Maximum operating temperature F (71 C) Maximum size pumpable solids in (0.64 cm) Maximum air input pressure psi (7 bar; 0.7 MPa) Air inlet size /4 npsm(f) Fluid outlet size in (50.8 mm) Tri-Clamp Instruction manual B A Dimensions Overall Air Motor Air Motor Inlet to Part Number Length (A) Height (B) Base (C) Outlet (D) in 21.4 in 47.0 in 36.8 in (173.7 cm) (54.3 cm) (119.3 cm) (93.4 cm) in 21.4 in 31.0 in 20.8 in (133.0 cm) (54.3 cm) (78.7 cm) (52.8 cm) in 21.4 in 29.9 in 18.8 in (130.3 cm) (54.3 cm) (75.9 cm) (47.7 cm) in 21.4 in 29.9 in 18.8 in (139.4 cm) (54.3 cm) (75.9 cm) (47.7 cm) in 21.4 in 29.9 in 18.8 in (127.3 cm) (54.3 cm) (75.9 cm) (47.7 cm) D C SENATOR 4:1 (FT-14) SANITARY EQUIPMENT CATALOG 23

26 Senator 4:1 Sanitary Pump (FT-14) Package This USDA-approved pump features work-on-demand capability. The pump can be taken apart in less than 5 minutes for those applications that require daily sanitation, and can empty a drum in less than 3 minutes when pumping somewhat flowable to moderately flowable fluids Features Evacuation rates up to 14 gpm, running at 60 cycles per minute 400 psi (27 bar, 2.8 MPa), outlet pressure Unique to air-operated pumps, all packages work-on-demand and do not require special controls to shut pump off when fluid line is shut off Improved plate design with inflatable wiper seals, allows for faster change out of drums Available in double ball and priming piston designs for additional system flexibility Packages fully assembled and tested prior to shipment All pumps and packages are compliant to specific agency standards Available packages designed to fit 21.5 in (54.6 cm), 22.5 in (57.1 cm), 23.0 in (58.42 cm) and in (59.06 cm) 55-gallon container sizes All packages capable of pumping from straight-sided fiber drums, chimed metal drums, tapered plastic drums, and polyliner drums Typical Application Unloading of somewhat flowable to moderately flowable fluids, from the original 55-gallon containers without the need to reduce the viscosity through liquid injection Typical Fluids Handled Jam and jelly Soft peanut butter Tomato paste Fudge Heavy chocolate 24 SANITARY EQUIPMENT CATALOG SENATOR 4:1 (FT-14)

27 Senator 4:1 Sanitary Pump (FT-14) Package Ordering Information Part Pump Pump Conical Plate Inflatable Ram Former Pkg Number Number Style Plate Number Size Seal Number Number Number Weight Priming Piston 15B " (54.6 cm) 15B lb (246.7 kg) Priming Piston 15B " (57.1 cm) 15B lb (250.3 kg) Double Ball 15B " (54.6 cm) 15B lb (240.4 kg) Double Ball 15B " (57.1 cm) 15B lb (245.8 kg) Technical Specifications Double Ball Pump Priming Piston Maximum fluid pressure 400 psi (28 bar 2.8 MPa) 400 psi (28 bar 2.8 MPa) Maximum 60 cpm * 14 gpm (53 lpm) 14 gpm (53 lpm) Maximum 100 cpm * 23 gpm (87 lpm) 23 gpm (87 lpm) Viscosity range of package 25,000 cps to 60,000 cps 60,000 to 100,000 Maximum inlet air pressure 100 psi (7 bar 0.7 MPa) 100 psi (7 bar 0.7 MPa) Air inlet size 3/4" npt(f) 3/4" npt(f) Evacuation efficiency 98% 98% Instruction manual * Flow rates based on full displacement of lower and S.G. = 1 Dimensions A = 107 in (271.8 cm) raised B = 67 in (170.2 cm) lowered C = 20 in (50.8 cm) D = 24 in (61.0 cm) E = 38 in (96.5 cm) F = 42 in (106.7 cm) G = 43.7 in (111.1 cm) A B E G F C D SENATOR 4:1 (FT-14) SANITARY EQUIPMENT CATALOG 25

28 Bulldog 10:1 Bare Pump This USDA-approved pump features 303 stainless steel wetted construction and can be fitted with the optional Adjust-A-Stroke air motor to provide accurate volumetric metering to ±2%. The Bulldog 10:1 is ideal for materials up to 1,000,000 cps, which have poor flow characteristics and usually require ram pressure to level the product and feed the pump inlet. Features and Benefits Delivery up to 8 gpm (31 lpm) Fluid outlet pressures up to 1000 psi (70 bar; 7 MPa) 303 stainless steel wetted construction Typical Application Fluid transfer and supply of high viscosity non-flowable fluids Typical Fluids Handled Peanut butter Ricotta cheese Cream candy filling Moist pet food 26 SANITARY EQUIPMENT CATALOG BULLDOG 10:1

29 Bulldog 10:1 Ordering Information Ordering Information Part Pump Pump Length Pump Inlet Number Type Description Type Packings Weight Priming Piston Drum Length 4" (10.2 cm) Priming Piston PTFE and UHMWPE 95 lb (Ram Package) (43 kg) Technical Specifications Fluid to air pressure ratio :1 Maximum fluid pressure psi (70 bar; 7 MPa) Maximum fluid flow at 100 cpm gpm (50.3 lpm) Maximum fluid flow at 60 cpm gpm (31 lpm) Volume per cycle gal (0.54 liter) Maximum air input pressure psi (7 bar; 0.7 MPa) Maximum operating temperature ºF (71ºC) Maximum size pumpable solids in (0.64 cm) Air inlet size /4 npsm(f) Fluid inlet size in (10.2 cm) Fluid outlet size /2 npt(f) Weight lb (46 kg) B Wetted parts SST, PTFE, UHMWPE, Acetal, Delrin Instruction manual Delrin is a registered trademarks of DuPont. Dimensions Overall Air Motor Air Motor Inlet to Part Number Length (A) Height (B) Base (C) Outlet (D) in in 25.8 in 17.5 in (119.3 cm) (53.9 cm) (65.5 cm) (44.4 cm) A C D BULLDOG 10:1 SANITARY EQUIPMENT CATALOG 27

30 Bulldog 10:1 Sanitary Priming Piston Pump Package This USDA-approved pump features a work-on-demand capability. By closing the outlet or dispense valve, the pump will stop until flow is again required. The Bulldog 10:1 is capable of pumping the highest viscosity fluids and can empty a drum in less than 5 minutes Features and Benefits Evacuation rates of up to 8 gpm, running at 60 cycles per minute 1000 psi (70 bar, 7 MPa), outlet pressure Unique to air operated pumps, all packages work-on-demand and do not require special controls to shut pump off when fluid line is shut off Improved plate design with inflatable wiper seals, allows for faster change out of drums Available in priming piston version for pumping the highest viscosity fluids (Bulldog only) Packages fully assembled and tested prior to shipment All pumps and packages compliant to specific agency standards Available packages designed to fit 21.5 in (54.6cm), 22.5 in (57.1cm), 23.0 in (58.42cm) and in (59.06cm) 55-gallon container sizes All packages capable of pumping from straight-sided fiber drums, chimed metal drums, tapered plastic drums, and polyliner drums Typical Application Unloading of very heavy to non flowing fluids, from the original 55-gallon containers without the need to reduce the viscosity through liquid injection Typical Fluids Handled Fruit paste Heavy peanut butter Heavy chocolate Cream candy filling Moist pet food 28 SANITARY EQUIPMENT CATALOG BULLDOG 10:1

31 Bulldog 10:1 Sanitary Priming Piston Pump Package Ordering Information Part Pump Pump Conical Plate Inflatable Ram Former Pkg Number Number Style Plate Number Size Seal Number Number Number Weight Priming Piston 15B " (54.6 cm) 15B / lb (248.5 kg) Priming Piston 15B " (57.1 cm) 15B / lb (254.9 kg) Priming Piston, 15B " (57.1 cm) 15B lb (257.6 kg) w/ Adjust-A-Stroke Motor Technical Specifications Priming Piston Maximum fluid pressure 1000 psi (70 bar, 7 MPa) Maximum 60 cpm* 8 gpm (31 lpm) Maximum 100 cpm* 13.3 gpm (50.3 lpm) Viscosity range of package 60,000 to 250,000 cps Maximum inlet air pressure 100 psi (7 bar, 0.7 MPa) Air inlet size 3/4" npt(f) Evacuation efficiency 98% Instruction manual * Flow rates based on full displacement of lower and S.G. = 1 Dimensions A = 107 in (271.8 cm) raised B = 67 in (170.2 cm) lowered C = 20 in (50.8 cm) D = 24 in (61.0 cm) E = 38 in (96.5 cm) F = 42 in (106.7 cm) G = 43.7 in (111.1 cm) A B E G F C D BULLDOG 10:1 SANITARY EQUIPMENT CATALOG 29

32 BES 300 Bin Evacuation System This USDA-approved pump features a work-on-demand capability. By closing the outlet or dispense valve, the pump will stop until flow is again required. Features and Benefits Evacuation rates with standard 2 pump systems up to 28 gpm with a Senator and 16 gpm with a Bulldog, running at 60 cycles per minute Evacuation rates can double with the available 4 pump BES 300 systems Outlet pressures of 400 psi (27 bar, 2.8 MPa) with a Senator pump and 1000 psi (70 bar, 7 MPa) with a Bulldog pump, enable the system to be installed further away from the production area Equipped with an inflatable wiper that seals the area between the plate and sides of the bin, virtually eliminating the potential for material to collect on top of the plate due to seal leakage Wiper seal automatically deflated to allow for faster change out of bins Packages fully assembled and tested prior to shipment All pumps and packages compliant to specific agency standards Typical Applications Unloading of moderately flowable to very heavy, non flowing fluids, from the original 300-gallon containers without the need to reduce the viscosity through liquid injection shown Typical Fluids Handled Senator system Bulldog systems Jam and jelly Fruit paste Tomato paste Soft peanut butter Fudge Heavy chocolate Heavy peanut butter Heavy chocolate Cream candy filling Moist pet food 30 SANITARY EQUIPMENT CATALOG BES 300

33 BES 300 Bin Evacuation System Ordering Information Part Pump Pump Number Bin Bin Number Number Style of Pumps Type Dimensions Weight x1 Senator, 2 Plywood 41.5 in W x in D x 39.0 in H 2100 lb (952.5 kg) Double Ball (1.05 m W x 1.14 m D x 0.99 m H) A x1 Bulldog, 2 Plastic, Metal 41.5 in W x in D x 39.0 in H 2462 lb ( kg) Priming Piston Cardboard (1.05 m W x 1.14 m D x 0.99 m H) B x1 Senator, 4 Plywood 41.5 in W x in D x 39.0 in H 2272 lb ( kg) Double Ball (1.05 m W x 1.14 m D x 0.99 m H) C x1 Bulldog, 4 Plastic, Metal in W x in D x 39.0 in H 2672 lb ( kg) Priming Piston Cardboard (1.05 m W x 1.13 m D x 0.99 m H) Note: Systems designed as A, B or C can be built but need to be specially ordered. Systems can also be designed for bin types other then plywood. Technical Specifications Plywood Bin Capabilities Maximum fluid pressure psi (28 bar, 2.8 Mpa) Maximum 60 cpm* 2 pumps gpm (106 lpm) 4 pumps gpm (112 lpm) Maximum 100 cpm* 2 pumps gpm (174 lpm) 4 pumps gpm (348 lpm) Viscosity range of package ,000 cps to 200,000 cps Maximum inlet air pressure psi (7 bar, 0.7 MPa) Air inlet size /4" npt (f) Communication RS232 Serial Electrical requirements VAC (60 Hz) Overall dimensions in W x 64 in D x 110 in H (1.5 m W x 1.6 m D x 2.7 m H) Evacuation efficiency 2 pumps % 4 pumps % Instruction manual * Flow rates based on full displacement of lower and S.G. = 1 Note: Graco s BES packages are available for a variety of manufacturers bins and custom systems can be built upon request. Contact Graco at for more information. BES 300 SANITARY EQUIPMENT CATALOG 31

34 Ram Plates Accessories Features and Benefits Inflatable wiper for maximum material coverage and minimal waste Blow-off port or conical plate available if required for sticky materials Conical bottom for high viscosity material and better priming Flat bottom for lower viscosity materials using diaphragm pumps Welded and grounded stainless steel sanitary construction for ultimate cleanliness 21-1/2 in (54.6 cm) straight sided fiber, 22-1/2 (57.1 cm) metal chimed or 22-1/2 (57.1 cm) tapered plastic drums Designed to handle a 23-1/4 in (59.1 cm) tapered drum with 2.5 in (63.5 mm) taper Typical Applications Unloading of moderately flowable to very heavy, non-flowable fluids, from the original 300-gallon containers without the need to reduce the viscosity through liquid injection Typical Fluids Handled Peanut butter Ricotta cheese Cream candy filling Moist pet food 32 SANITARY EQUIPMENT CATALOG RAM PLATES

35 Ram Plates Technical Specifications Piston Pumps 21.5 in (54.6 cm) Diameter 22.5 in (57.1 cm) Diameter Unloader Plate Unloader Plate Container I.D. 20-1/2-21-3/4 in 21-1/2-23-1/4 in ( cm) ( cm) Material 316 SST 316 SST Weight 40 lb (18.14 kg) 40 lb (18.14 kg) Wiper Inflatable Neoprene Inflatable Neoprene Pump mount Universal (piston pump) Universal (piston pump) Top lip minimum clearance I.D. 20-1/4 in (51.4 cm) 21-1/4 in (54.0 cm) Max inflatable seal pressure 15 psi (1.0 bar, 0.1 MPa) 15 psi (1.0 bar, 0.1 MPa) Note: Safety relief valve for inflatable seal is factory-set at 22 psi (1.5 bar, 0.15 MPa). Husky 2150 Diaphragm 21.5 in (54.6 cm) Diameter 22.5 in (57.1 cm) Diameter Unloader Plate Unloader Plate Container I.D. 20-1/2-21-3/4 in 21-1/2-23-1/4 in ( cm) ( cm) Material 316 SST 316 SST Weight 40 lb (18.14 kg) 40 lb (18.14 kg) Wiper Inflatable Neoprene Inflatable Neoprene Pump mount Husky 2150 FDA Husky 2150 FDA Top lip minimum clearance I.D. 20-1/4 in (51.4 cm) 21-1/4 in (54.0 cm) Max. inflatable seal pressure 15 psi (1.0 bar, 0.1 MPa) 15 psi (1.0 bar, 0.1 MPa) Note: Safety relief valve for inflatable seal is factory-set at 22 psi (1.5 bar, 0.15 MPa). Ordering Information Piston Pumps Husky 2150 FDA Diaphragm Pump Husky 3150 Diaphragm Pump 21.5 in (54.6 cm) 22.5 in (57.1 cm) 21.5 in (54.6 cm) 22.5 in (57.1 cm) 21.5 in (54.6 cm) 22.5 in (57.1 cm) Conical Plate Size Conical Plate Size Flat Plate Size Flat Plate Size Flat Plate Size Flat Plate Size Part No. Part No. Part No. Part No. Part No. Part No. Plate without seal 15B080 15B081 15C787 15C736 15D653 15D654 Inflatable Seal Options 21.5 in (54.6 cm) 22.5 in (57.1 cm) Seal Material Plate Size Part No. Plate Size Part No. Materials Neoprene* 15B097 15B098 All purpose materials Buna N 15B099 15B100 Oils, fatty materials EPDM 15B101 15B102 Wide chemical compatibility, alternative to Neoprene *Standard on systems RAM PLATES SANITARY EQUIPMENT CATALOG 33

36 Accessories Sanitary Pumps and Packages Pumps Air Controls Part Number Air regulator and filter for Husky FDA and FDA Plus pumps 1/2 in npt (12.7 mm) (f) Filter, regulator, and lubricator combination for Monark 3/8 in npt (9.52 mm) (f) Filter, regulator, and lubricator combination for Senator and Bulldog 3/4 in npt (19.05 mm) (f) Air shut off valve 1/2 in npt (12.7 mm), bleed type, relieves trapped air downline of valve. FDA pumps Air shut off valve 3/8 in npt (9.52 mm), bleed type, relieves trapped air downline of valve. Monark pumps Air shut off valve 3/4 in npt (19.05 mm), bleed type, relieves trapped air downline of valve. Senator/Bulldog pumps Air runaway valve (stop pump from cavitating when empty) Air Hoses Air hose: 3/8 in (9.52 m) male connections. 10 ft (3 m) length Air hose: 3/4 in (19.05 m) male connections. 10 ft (3 m) length Fluid Hoses 2 in (50.8 m) ID, sanitary Tri-Clamp connections. 10 ft (3 m) length Gallon Ram Ram Plates for Inflatable Wiper Seals 316 SST 21.5 in (54.6 cm). Conical bottom. Seals not included. Designed for Monark, Senator, and Bulldog pumps 316 SST 22.5 in (57.1cm). Conical bottom. Seals not included. Designed for Monark, Senator, and Bulldog pumps 15B080 15B SST 21.5 in (54.6 cm). Flat bottom. Seals not included. Designed for Husky 2150 pump 15C SST 22.5 in (57.1 cm). Flat bottom. Seals not included. Designed for Husky 2150 pump 15C SST 21.5 in (54.6 cm). Flat bottom. Seals not included. Designed for Husky 3150 pump 15D SST 22.5 in (57.1 cm). Flat bottom. Seals not included. Designed for Husky 3150 pump 15D654 Replacement Seals for Inflatable Wiper Seals Neoprene seal for 21.5 in (54.6 cm) plates. Good for general purpose use. Comes standard on packages Neoprene seal for 22.5 in (57.1 cm) plates. Good for general purpose use. Comes standard on packages Buna-N seal for 21.5 in (54.6 cm) plates. Good for petroleum based materials at ambient temperatures Buna-N seal for 22.5 in (57.1 cm) plates. Good for petroleum based materials at ambient temperatures EPDM seal for 21.5 in (54.6 cm) plates. Good for acidic materials EPDM seal for 22.5 in (57.1 cm) plates. Good for acidic materials 15B097 15B098 15B099 15B100 15B101 15B102 Ram Plates for Solid Wiper Seals 304 SST 22.5 in (57.1 cm). Conical bottom, includes 2 round wipers. For 22.5 in (57.1 cm) and 23.0 in (58.42 cm) drums SST 21.5 in (54.6 cm). Conical bottom. Includes 1 flat wiper. For 21.5 in (54.6 cm) drum SANITARY EQUIPMENT CATALOG ACCESSORIES

37 Accessories Sanitary Pumps and Packages 55 Gallon Ram (continued) Replacement Seals for Ram Plates with Solid Wiper Seals Part Number Flat Neoprene seal for 21.5 in (54.6cm) plate, part number Round Neoprene seal for 22.5 in (57.1cm) plate, part number Flat Neoprene seal for 23.0 in (58.42cm) plate, part number Plate is obsolete Flat Neoprene seal for 22.0 in (55.88cm) plate, part number Plate is obsolete Miscellaneous 55-gallon pneumatic ram with air controls for solid wiper seal plates gallon pneumatic ram with air controls for inflatable wiper seal plates Universal tie rod connectors for either the or rams Pump mounting bracket for Senator and Bulldog pumps Pump mounting bracket for Monark pumps Retrofit kit to change ram air controls from non-inflatable to inflatable Conversion kit for solid wiper ram plate to inflatable. Includes air controls, wiper seal and plate. For 21.5 in (54.6 cm) drums Conversion kit for solid wiper ram plate to inflatable. Includes air controls, wiper seal and plate. For 22.5 in (57.1 cm) drums 300 Gallon 15B154 15B111 15B114 Inflatable seal for BES 300 systems designed for Plywood bins Inflatable seal for BES 300 systems designed for Arena bins Inflatable seal for BES 300 systems designed for TNT bins Corner seals for BES 300 systems Pump Conversion Kits for Husky 3150 pumps Converts ball to flapper, includes four flapper assemblies Converts flapper to ball, includes four housing retainers, balls need to be ordered separately Pump Inlet/Outlet Tees for Husky 3150 pumps 15D989 15E285 3 x x x x Leak Detector for Husky 3150 pumps Leak Detector Kit 15D990 ACCESSORIES SANITARY EQUIPMENT CATALOG 35

38 Hydra-Clean Air-Operated Pressure Washers Features and Benefits Supply packages include everything you need for use with open-head universal drums Available with an accumulator and chemical injector Configurations available to fit most pressure, flow, and material requirements Supports multiple guns Use with cold or hot water up to 200 F (93 C) Typical Applications Vehicle fleets, buses, transit systems Heavy construction equipment, off-highway vehicles General industrial equipment Building exteriors Sanitizing Public works facilities and equipment Farm maintenance Marinas Typical Coatings Applied Water Detergent solutions Chemical solutions Technical Specifications Max. Working Max. Air Fluid Flow Vol. per Air Fluid Fluid Package Pump Pressure Input Pressure at 60 cpm Cycle Inlet Inlet Outlet Instruction Package psi (MPa, bar) psi (MPa, bar) gpm (lpm) oz (cc) Size Size Size Manual President 10: gpm 6.4 1/2 npt(f) 3/4 npt(f) 1/2 npt(f) (7, 69) (0.7, 7) (11.4) (189) Bulldog 10: /4 npsm(f) 2 npt(f) 1-1/2 npt(m) (7, 69) (0.7, 7) (29) (505) Premier 34: /4 npsm(f) 2 npt(f) 1-1/2 npt(m) (23, 230) (0.7, 7) (34.8) (580) 36 SANITARY EQUIPMENT CATALOG HYDRA-CLEAN