Table of Contents. 1.1 Flex Power In-Line Air Tools (Lever & Push-to-Start) 1.2 Flex Power Pistol Grip Air Tools

Transcription

1

2 Table of Contents. Flex Power InLine Air Tools (Lever & PushtoStart).2 Flex Power Pistol Grip Air Tools.3 Flex Power Right Angle Air Tools.4 EZTorQ (Torque Analyzers). TorqueLab LTTSeries (Torque, Angle & Force Analyzers). EZGlider Linear Torque Arm.7 EZSlider Torque Arm. EZGlider Articulated Torque Arm.9 EZGlider Telescoping Torque Arm.0 EZGlider Telescoping Torque Arm. EZGlider Position Control Torque Arm.2 Accessories.3 Special Bits.4 Bit Holders & Nutsetters. Power Bits. Power Bits.7 Tool Balancers. Flex Power InLine Pulse Tools.9 Flex Power Pistol Pulse Tools.20 Flex Power Right Angle Pulse Tools.2 Sleeve Drive Impact Sockets. Pulse Tool Selection Guide TABLE OF CONTENTS i MC 4 (version.0)

3 InLine Pneumatic Screwdrivers KEY FEATURES Various models that range from lbf.in High performance oil free motor delivers environmentally friendly, durable, power and speed. One third more power than competitive models. Safe operation with reduced noise, vibration and low torque reaction. High accuracy patented clutch with precision automatic shutoff. Soft texture ergonomic grip for operator comfort. One touch torque adjustment, eliminates difficult set up of drivers. Torque nut cover prevents operator tampering. Four different colored tool bands allow color coding of specific torque values (Red, Green, Blue, Yellow are included) Built with new aluminum alloy to provide durability and reduced maintenance no cracking, fading or chipping found in composite body tools. Wide ranges and RPM selections all for easy tool specification based on application requirements. XP3 XP3PS XP40 XP40PS XP4 XP4PS XP4 XP4PS XP0 XP0PS Driver Type Lever Start PushtoStart Lever Start PushtoStart Lever Start PushtoStart Lever Start PushtoStart Lever Start PushtoStart Torque Ranges lbf.in N.m COLOR CODE RINGS Four different colored tool bands allow color coding of specific torque values (Red, Green, Blue, Yellow are included) RPM Grip Dia. /4" /4" /4" /4" /4" /4" /2 /2" /2" /2" Length " 7" " 7" " 7" 9 /2" /2" 9 /2" /2" Drive Size /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex Weight lbs Noise dba Air Usage cfm Min. Air Hose Bore.0 mm.0 mm.0 mm.0 mm.0 mm.0 mm.0 mm.0 mm.0 mm.0 mm EZGLIDER The torque arm keeps the tool perpendicular and prevents cross threading and side load. Maneuvers smoothly as arm absorbs torque reaction. Fastening Capacity Machine Tapping Screw Dia Screw Dia M2.2 M4. M.7 M3. M2.2 M4. M.7 M3. M2. M.2 M2.2 M4.2 M2. M.2 M2.2 M4.2 M3.3 M. M2.7 M4.7 M3.3 M. M2.7 M4.7 M3. M.3 M2. M.3 M3. M.3 M2. M.3 M.0 M7. M4.0 M.3 M.0 M7. M4.0 M.3 InLine Mountz MC4 catalog Copyright 2009 all rights reserved

4 Pistol Grip Pneumatic Screwdrivers KEY FEATURES Various models that range from 2..2 lbf.in. High performance oil free motor delivers environmentally friendly, durable, power and speed. One third more power than competitive models. Safe operation with reduced noise, vibration and low torque reaction. High accuracy patented clutch with precision automatic shutoff. Soft texture ergonomic grip for operator comfort. Onetouch torque adjustment, eliminates difficult set up of drivers. Torque nut cover prevents operator tampering. Built with new aluminum alloy to provide durability and reduced maintenance no cracking, fading or chipping found in composite body tools. Wide ranges and RPM selections all for easy tool specifications based on application requirements. Patented MultiAir inlet selection (handle, back and top) provides versatility for hose connection depending on application. Provides flexible options for production set ups and space restrictions. B C B C MULTIAIR SELECTION 3 locations to attach air hose: A Handle B Top C Back A A XP3P XP4P XP4P XPP XPP Torque Ranges lbf.in N.m RPM Grip Dia. /4" /4" /2 /2" /2" Length 7" 7" /2" /2" /2" Drive Size /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex Weight lbs Noise dba Air Usage cfm Min. Air Hose Bore.0 mm.0 mm.0 mm.0 mm.0 mm Fastening Capacity Machine Tapping Screw Dia Screw Dia M2.2 M4. M.7 M3. M2. M.2 M2.2 M4.2 M3. M.3 M2. M.3 M3. M.9 M3.0 M.9 M.0 M9.3 M4.0 M7.2 ISO 900and ISO 702 Company PISTOL GRIP.2

5 Right Angle Pneumatic Screwdrivers KEY FEATURES Various models that range from lbf.in. High performance oil free motor delivers environmentally friendly, durable, power and speed. One third more power than competitive models. Safe operation with reduced noise, vibration and low torque reaction. High accuracy patented clutch with precision automatic shutoff. Soft texture ergonomic grip for operator comfort. Onetouch torque adjustment, eliminates difficult set up of drivers. Torque nut cover prevents operator tampering. Four different colored tool bands allow color coding of specific torque values (Red, Green, Blue, Yellow as standard are included) Built with new aluminum alloy to provide durability and reduced maintenance no cracking, fading or chipping found in composite body tools. Wide ranges and RPM selections all for easy tool specification based on application requirements. XP3A XP40A XP4A XPA XP0A Torque Ranges lbf.in N.m RPM Grip Dia. /4" /4" /2" /2" /2" Length /4" /4" 3 /4" 3 /4" 3 /4" Drive Size /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex /4" F/Hex Weight lbs Noise dba Air Usage cfm Min. Air Hose Bore.0 mm.0 mm.0 mm.0 mm.0 mm Fastening Capacity Machine Tapping Screw Dia Screw Dia M2.2 M4. M.7 M3. M2. M.2 M2.2 M4.2 M3. M.3 M2. M.3 M3. M.9 M3.0 M.9 M.0 M7. M4.0 M.3 COLOR CODE RINGS Four different colored tool bands allow color coding of specific torque values (Red, Green, Blue, Yellow are included) COIL AIR HOSE Dual swivel hose fittings provide 30 rotation. Right Angle Mountz MC4 catalog Copyright 2009 all rights reserved

6

7 LTT0i LTT2i LTT0i LTT00i LTT20i LTT0F LTT00F LTT20F LTT. Torque Analyzers CABLE CHART Cable Transducer RTSXA All BLRTSX models BMX LPX SDX RTSX ETX American 0 lbf.in 2. 2 lbf.in 0 lbf.in 0 00 lbf.in 2 20 lbf.in 0 lbf.ft 0 00 lbf.ft 2 20 lbf.ft Torque Ranges S.I. Metric.3 3 cn.m.2. kgf.cm cn.m kgf.cm. cn.m. 7. kgf.cm 3 cn.m. kgf.cm cn.m 2. 2 kgf.cm. 7. N.m kgf.m N.m.4 3. kgf.m N.m kgf.m ACCESSORIES INCLUDED Universal Charger (00 240VAC) USB Cable Mountz Software Programs Run Down Adapter Case Drive Size /4" F/Sq /4" F/Sq /4" F/Sq /4" F/Sq /4" F/Sq 3/" F/Sq /2" F/Sq /2" F/Sq ACCESSORIES OPTIONAL Description Wt. lbs. lbs. lbs. lbs. lbs. lbs. lbs. lbs. Charger VAC 7700 USB Cable Battery Pack 0720 Multiplexer Bar Code Reader Mounting Bracket (for LTT model 0i0F) 0720 Mounting Bracket (for all other LTT models) 0720 PLC Interface TorqueLab LTT Series Torque, Angle & Force Analyzer with ARCII Technology KEY FEATURES Accuracy 0.% of reading from 20% to 00% of full scale. Accuracy % of reading from 0% to 20% of full scale. Recommended for all hand screwdrivers, wrenches, or power tools. Features a builtin transducer and can connect to an external transducer. Provides EZPlug & Play with Mountz Transducers. Features ARCII technology, an instant autorecognition system of the transducer connected to the LTT. Selection of six operation modes: Track, Peak, First Peak, Audit, Spindle Audit, and Torque + Angle Seven units of torque measurements: ozf.in, lbf.in, lbf.ft, cn.m, N.m, kgf.m, kgf.cm Two units of force measurement: lbf and kn Features builtin Tool Tests operation. Includes three PC Windows based software programs: Mountz Torque Meter Interface Program for sensor calibrations, meter calibration and tool tests. Torque Meter Bootloader for updating the LTT operating systems. Excel AddIn for RealTime data collection into an Excel spreadsheet. It provides statistics calculations. Flash memory allows upgrades to be done by the user in the field & internet through the USB port. Five lowpass filters: 00, 2000, 00, 00, and 200Hz Sixdigit display and easy to read menu structure. Real Time Clock for time stamping of readings. USB interface to download readings to PC. High Capacity Liion Batteries for long life ( hours with standard transducers and hours with brushless rotary). Can connect to most mv/v transducers and can store calibration data for up to 0 nonsmart torque sensors. The VDC capability allows unit to be used with a Brushless Rotary Transducer for testing pulse tools and high RPM tools. Torque and Angle data is displayed simultaneously when used with Torque and Angle transducers, up to 000 RPM for angle measurement. Stores a total of 000 data points. Real time graph of torque vs. time using associated PC Windows software. Features Go / No Go LEDs that illuminate when high or low setting is achieved. PLUG & PLAY NOTE! Since a tester cannot always duplicate actual joint characteristics, the torque reading displayed on the LTT may vary from the actual torque that a tool will apply to a joint. When critical assemblies are involved, the torque output of the power tool being used should be verified on the actual assembly using a calibrated measuring torque tool. CERTIFIED Supplied with NISTTraceable Certification of Calibration

8 EZGlider Linear Torque Arms KEY FEATURES Prevents cross threading and side load. Keeps tool perpendicular. Reduces RMI (Repetitive Motion Injury) and CTS (Carpal Tunnel Syndrome) while boosting production. Extends in horizontal direction and arm length is adjustable. Maneuvers smoothly as the arm absorbs torque reactions from electric & pneumatic tools. Built with seasoned craftsmanship, every torque arm cylinder has four rows of ball bearings for smooth movement. A magnet on the backside of the tool clamp holds driver firmly against arm. Includes an inline driver clamp. LINEAR TORQUE ARMS Max Torque American S.I. EZ2 EZ2 EZ40 EZ lbft.ft.4 lbft.ft 29. lbft.ft 73.7 lbft.ft 2 N.m 2 N.m 40 N.m 00 N.m Clamp Dia. /2" 2" 2" 2" Height 32 /2" 3 /2" 40 /2" 40 /2" Min Arm Reach /2" /3" 2 7 /" 2 /3" Max Arm Reach " " 29 /2" 33" Balancer Capacity. 2. lbs lbs lbs lbs. Driver & Transformer not included. NOTE! An additional balancer (202) can be added to the EZ40 & EZ00 model to increase balancer capacity. The additional balancer increases the dual balancer capacity to.3. for the EZ40, and. 3.2 for the EZ00. ACCESSORIES ServoAssisted System EZ2 EZ2 EZ40/00 EZ2 EZ2 EZ40/00 EZ40/00 EZ00 Description ServoAssisted Electric Kit 2009 ServoAssisted Electric Kit ServoAssisted Electric Kit 2000 Easy Push Electric Kit 200 Easy Push Electric Kit 2004 Easy Push Electric Kit Easy Push Electric Kit Easy Push Electric Kit 2003 DOWNWARD ASSISTANCE KIT These kits are ideal for selftapping applications. The downward assistance system requires no effort from the operator to press downward on the driver as the operator simply presses the trigger of the driver and the cylinder glides the tool downward automatically. There are two system options available Easy Push and ServoAssisted. ServoAssisted system features a built in collet chuck that allows the system to be used at any height. Easy Push system operates only at a preset height by using a mechanical stop that is set along the pole. Both systems can be installed on a Linear or Articulated arm. Pushing Force lbs. 7. lbs. 7. lbs. lbs. 9. lbs. 9. lbs. 33 lbs. lbs. Stroke 4 7 /" /4" 7 7 /" 7 7 /" 7 7 /" EXTENSION SLIDES Expands the maximum arm reach of the EZGlider Linear Arms. EZ2 EZ2 EZ40 EZ00 Extends Max. Arm Reach 27." 27." 3" 4" EXTENSION DOUBLE SLIDE Expands the maximum arm reach of the EZGlider Linear Arms by adding a second slide to the arm. EZ2 EZ2 EZ40 EZ00 Extends Max. Arm Reach 3."." 4" 4" ARP SYSTEM (not pictured) ARP (automatic rest position): A recoil spring positioned on the slide to permit the arm to come back to the rest position as soon as you release it. EZ EZ EZ EZ00 ANTIROTATING CLAMP Attach an AntiRotating Clamp to prevent the arm from rotating sidetoside to help the operator target the screw quickly and precisely. for EZ2 & 2 Linear Arms 2009 for EZ40 & 00 Linear Arms 200 EZGLIDER.

9 EZSlider Sliding Torque Arms KEY FEATURES An ideal ergonomic solution for multitool applications such as a moving production and assembly line. Ideal for automotive production lines. Maintenance Free. Arm is crafted with a lightweight durable carbon fiber. Easy to install and improves operator comfort and productivity. Requires little space and doesn t disrupt production flow. Mountable with a standard rail system, trolley, aluminum extrusion, wall or existing work station. Eliminates torque reaction of power tools. Can be used with a variety of assembly tools like angle nutrunners and electric & pneumatic screwdrivers. Arm slides up and down and provides X & Y axis mobility. EZSLIDER TORQUE ARMS Max Torque lbf.ft N.m Clamp Dia. Max Vertical Stroke Balancer Capacity EZSlider EZSlider EZSlider 40 EZSlider * * 2" 2" 7 3 /4" 7 3 /4" /2" /2" 4.4. lbs lbs lbs. 7. lbs. * The EZSlider & comes with a standard 3/" air fitting. An electric tool clamp is sold separately. Rail not included. ACCESSORIES GLIDING RAIL SYSTEM EZSlider arm slides up and down. Gliding Rail System allows the EZSlider arm to glide horizontally (sidetoside) on a production floor. Combine these two items and get the Slide & Glide movement. The Gliding Rail System can mount to a standard rail system, wall, aluminum extrusion or existing overhead system and is available in a variety of lengths. The EZSlider mounts on to the Carriage. Each Gliding Rail System includes one Carriage. (Standard Gliding Rail System pictured) Standard Gliding Rail System (for EZSlider, & 40) High Torque Gliding Rail System (for EZSlider 0) Working Distance/ 40mm #2003 0mm 0mm 00mm 30mm 0mm #2004 #200 #200 #2007 # mm 20mm 320mm 20mm #203 #2032 #2033 #2034 Pivot joints allow total movement and flexibility. CARRIAGE (Only for Standard Gliding Rail System) Additional Carriages can be purchased separately and added only to the Standard Gliding Rail System, which allows for multiple Slider Arms to be used freely on a rail system. A Thrust Stopper should be placed between each carriage EZSLIDER.7 BALANCER CARRIAGE Features a hook for mounting a tool balancer. It can only be mounted to the Standard Gliding Rail System THRUST STOPPER When having multiple carriages mounted to the Standard Gliding Rail System, it s recommended to place a Thrust Stopper between each carriage TOOL CLAMP FOR ELECTRIC DRIVERS Clamp Dia. EZSlider EZSlider " 2" *Clamps for VZ & VBSeries models ONLY. Driver not included. Mountz MC4 catalog Copyright 200 all rights reserved

10 EZGlider Articulated Torque Arms KEY FEATURES Prevents cross threading and side load. Keeps tool perpendicular. Reduces RMI (Repetitive Motion Injury) and CTS (Carpal Tunnel Syndrome) while boosting production. With the ability to bend like an elbow, the torque arm provides agility to position the tool in a variety of positions for different applications. Arm can be set at an inclination of 0,. & 4. Provides smooth flexible range as the arm absorbs torque reactions from electric & pneumatic screwdrivers, angle nut runners, pulse tools, pistol grip style tools, grinders & drills. Arm length is adjustable. Includes an inline driver clamp. Versatile torque arm works with a variety of tools, using different tool clamp options: angle drivers, pistol grip drivers & inline drivers. Driver & Transformer not included. ARTICULATED TORQUE ARMS Max Torque American S.I. EZ2R EZ2R EZ40R EZ00R lbft.ft.4 lbft.ft 29. lbft.ft 73.7 lbft.ft 2 N.m 2 N.m 40 N.m 00 N.m Height 32 /2" 3 /2" 40 /2" 40 /2" 0 /" 2" /2" 2 /2" /4" " 2 /3" 34" Min and Max Arm Reach at Inclination. 4 4 /2" 20" " 20 /2" 2 /" 29" 2 /" 33" 2 /3" " 2 7 /" /2" /" 2" " 29 /2" Balancer Capacity. 2. lbs lbs lbs lbs. NOTE! An additional balancer (202) can be added to the EZ40R & EZ00R model to increase balancer capacity. The additional balancer increases the dual balancer capacity to.3. for the EZ40R, and. 3.2 for the EZ00R. ACCESSORIES An inline driver clamp is included with the torque arm. Other clamp options are available and sold separately. Rotating Clamp Pistol Grip Clamp Angle Driver Clamp Nipple Clamp For : EZ2R Description Clamp Dia. Rotating Clamp Pistol Grip Clamp Angle Driver Clamp Nipple Clamp "." "." "." * * Nipple clamp includes /4" and /" hose exhaust mm. For s: EZ2R & 40R Clamp Dia. " 2" 200 " 2" 2003 " 2" For : EZ00R Clamp Dia. " 2" 200 EZGLIDER.

11 EZGlider Telescoping Torque Arms Driver not included. KEY FEATURES Crafted with lightweight durable carbon fiber the arm collapses like a telescope. Easytouse, requires little space and doesn t disrupt production flow. The effortless handling of the torque arm provides comfortable tool operation and increased production. Mountable and easy to install on a wall, workbench and a standard rail or trolley system. Maintenance free. Eliminates torque reaction of power tools. Can be used with a variety assembly tools like, electric & pneumatic screwdrivers, angle nutrunners, pulse tools, pistol style tools, grinders, impact wrenches, drills, sanders, and percussion tools. Long arm reach capability up to ft. Perfect for MVI applications. Universal Adapter included with EZ2T, T, 0T & 40T models. Torque capacity up to 47. lbf.ft (200 N.m). MOUNTING TO THE "STANDARD GLIDING RAIL SYSTEM" The Telescoping Torque Arms can be mounted to the Standard Gliding Rail System (sold separately) and can be used in a variety of positions. For a vertical position it is necessary to install one additional item, an interface bracket (sold separately). INTERFACE BRACKET Interface Bracket for EZT, 0T & 40T 200 for EZ200T 2002 Standard Gliding Rail System SLEEVE KIT (ACCESSORY) 200 Connect Standard Gliding Rail System together. Working Distance/ 40mm 0mm 0mm 00mm 30mm 0mm #2003 #2004 #200 #200 #2007 #200 EZGLIDER Mountz MC4 catalog Copyright 2009 all rights reserved

12 TOOL POSITIONING OPTIONS Besides the standard inline tool mounting position, the telescoping arm can be used with assembly tools in a variety of positions. For some tool positioning options, different tool clamp needs to be ordered separately. P P2 P3 P4 Standard Tool Balancer needs to be mounted above an inline tool. TELESCOPING TORQUE ARMS Max. Torque lbft.ft N.m EZ2T EZ2T/00 EZ2T/2000 EZT EZT/00 EZT/2000 EZT/ Clamp Dia.."."." 2" 2" 2" 2" Min Arm Reach." 2." 32.3".7" 2." 32.4" 39." Max Arm Reach 37" 9" 7.7" 37." 9" 7.7" 9.4" Weight of Arm.3 lbs. 2.7 lbs. 3.3 lbs.. lbs. 3.3 lbs. 4 lbs. 4.4 lbs. P Tool Postion Options P2 P3 No No No No No No, Order Clamp #204, Order Clamp #2044, Order Clamp #204, Order Clamp #2044, Order Clamp #204, Order Clamp #2044, Order Clamp #204, Order Clamp #2044 P4 No No No, Order Clamp #204, Order Clamp #204, Order Clamp #204, Order Clamp #204 HIGH TORQUE TELESCOPING ARMS Min Max Max. Torque Clamp Arm Arm Weight Tool Postion Options lbft.ft N.m Dia. Reach Reach of Arm P P2 P3 EZ0T/00 EZ0T/2000 EZ0T/200 EZ40T/00 EZ40T/2000 EZ40T/200 EZ200T/00 EZ200T/2000 EZ200T/ " 2" 2".2 2".2 2".2 2" * * * 2." 34." 4.3" 3." 4.4".2" 37.4" 47.2" 7." 9" 7.7" 9.4" 9" 7.7" 9.4" 9" 7.7" 9.4". lbs. 7. lbs. 7.7 lbs. 7.7 lbs..4 lbs.. lbs. 7.7 lbs..4 lbs.. lbs. * Customer must provide information (Brand & ) on each tool being used with the arm. The clamp is custom made to fit the tool being used. P4, Order Clamp #204, Order Clamp #204, Order Clamp #204, Order Clamp #204, Order Clamp #204, Order Clamp #204, Order Clamp #2049, Order Clamp #2049, Order Clamp #2049 BALANCING KIT FOR VERTICAL MOUNTING A balancing kit can be mounted on the side of any of telescoping arm. It allows the arm to be used with pistol grip tools and angle nutrunners (see tool position options above for using angle nutrunners with arms). E E2 E3 E Balancer Capacity lbs lbs lbs lbs. Stroke 3" 7.7" 7.7" 7.7" Example of E Balancer Kit being attached to a telescoping arm. NOTE! It is recommended to use a tool balancer with all EZGlider Telescoping Arm models. The telescoping arms should not be used at maximum arm reach on a permanent basis. ISO 900and ISO 702 Company EZGLIDER.0

13

14 MAGNETIZER / DEMAGNETIZER Magnetize or demagnetize bits and parts instantly. 20 Accessories Electric Torque Screwdrivers TOOL STAND A rugged adjustable tool support stand. Prevent tool damage due to dropping or mishandling. Convenient tool positioning adjust both vertically and horizontally. Electric tool cords can be tiewrapped to the vertical base to keep work station clean. 30 degree swivel. Four foot high, maximum arm length.7 feet. A balancer is recommended. : MT Pneumatic Center Block Fitted with a pretapped plumbing holes. For attaching air fittings or air hose on MT0 Tool Stand. 03 COIL AIR HOSE Dual swivel hose fittings provide 30º rotation. Durable polyurethane hose mm ID. Flexible, lightweight and good recoil memory. /4 NPT fitting. Burst pressure 42 PSI at 73º F Length m 0m COUPLER for Air Tool (Universal /4 female) FITTINGS for Air Tool /4" Female (Milton type) for Air Tool /4" Male (Milton type) 3003 BENCH CLAMP Used to clamp MT0 Tool Stand base to table tops. This handy unit eliminates hole drilling and secures the tool stand in place. It s flexible and ready to move at a moments notice. : REGULATOR NPT Port Size: /4" Filter Element: μ Max. Input Pressure: 0 PSI Max. Output Pressure: 7 ~ 40 PSI Max. Flow: 3. cfm Operating Temp. Range: 40 F ~ 40 F Drain Capacity: ml Oil Capacity: 2 ml Recommendable Lubricants: ISO VG32 MAGONETS Magnetize bits by sliding a MagONet onto the bit. Desc. for 3/" Shank Bit for mm Shank Bit for /4" Shank Bit Inner Dia. 3/" mm 7mm (actual size) Outer Dia. 7.mm 7.mm 9mm Package Quantity Use For most 0 & 00 bits Reduced Dia. Bits Standard Bits ISO 900and ISO 702 Company Accessories.2

15 Special Bits When ordering special extended bits, we need the specific information below to provide a quote. /4 Hex A/F inches /4 Hex A/F inches /4 Hex A/F inches L L2 L L2 L L2 HEX BITS or BLADES AMERICAN METRIC A/F L2 (max.) A/F.0" 3".mm /" 3 /4" 2mm /4" 3 /2" 2.mm 3/32" 3 3 /4" 3mm 7/4" 7" 3.mm /" 7 /2" 4mm 9/4" " mm /32" /2" mm 3/" 9 /4" mm /4" " /" 7" L Length of Shank H for /4" Hex (in inches) ORDERING SYSTEM A/F 2H HS HS for Hex Standard HM for Hex Metric L2 (max.) 3 /4" 4 3 /4" /2" 7 /4" 4 /2" /4" 9 /4" 0" 0 3 /4" L2 Length of Blade (in inches) BALL POINT BITS or BLADES AMERICAN METRIC A/F L2 (max.) A/F L2 (max.).0" /" /4" 3/32" 7/4" /" 9/4" /32" 3/" /4" /" 3" 3 /4" 3 /2" 3 3 /4" 7" 7 /2" " /2" 9 /4" " 7".mm 2mm 2.mm 3mm 3.mm 4mm mm mm mm 3 /4" 4 3 /4" /2" 7 /4" 4 /2" /4" 9 /4" 0" 0 3 /4" L Length of Shank H for /4" Hex (in inches) ORDERING SYSTEM A/F 2H /. BP BP for Ball Point L2 Length of Blade (in inches) SPLINE BITS or BLADES AMERICAN A/F L2 (max.) Flutes.04".00".09".072".07".09".0".4" 2.7" 2.7" 2.7" 2.7" 2.7" 2.7" 2.7" 4." 4 ORDERING SYSTEM L Length of Shank H for /4" Hex (in inches) A/F # of Flutes H SB SB for Spline Bit NOTE! Bits in excess of 4" long are subject to bowing. L2 Length of Blade (in inches) SPECIAL BITS Mountz MC4 catalog Copyright 2009 all rights reserved

16 Bit Holders For use with ALL Drivers SCREW CAP RETAINER (nonmagnetic) Length 2 7 /" 4" " Drive /4 Hex /4 Hex /4 Hex Diameter Body Nose 3/" 7/" 3/" 7/" 3/" 7/" SCREW CAP RETAINER (magnetic) Length 2 3 /" 2 7 /" 4" " " " Drive /4 Hex /4 Hex /4 Hex /4 Hex /4 Hex /4 Hex Diameter Body Nose 3/" 7/" 3/" 7/" 3/" 7/" 3/" 7/" 3/" 7/" 3/" 7/" CRING RETAINER (magnetic) Length 2 /" 2 7 /" 4" " " Drive /4 Hex /4 Hex /4 Hex /4 Hex /4 Hex Body Dia. 3/" 3/" 3/" 3/" 3/" /4" F/SQ. DR. to /4" F/HEX BIT HOLDER 4MM 2002 AUTOLOCK BIT HOLDER 0MM (NONMAGNETIC) 200 AUTOLOCK BIT HOLDER 0MM (MAGNETIC) 200 Nutsetters For use with ALL Drivers American Metric B A A /4" MAGNETIC Hex Size A 3/" 20 /4" 204 /4" 207 /4" 2037 /4" /" 20 /" 203 /" 20 3/" 2 3/" 202 3/" 22 7/" 2074 mm 207 mm mm 2070 mm mm Overall Length 2" /" 2 9 /" 4" " /" 2 9 /" 3" 7 /" 2 9 /" 3" 2 9 /" 2 9 /" /" /" /" 7 /" Socket Body Diameter B /" 7/" 7/" 7/" 7/" /2" /2" /2" 9/" 9/" 9/" /" /4" /4" 7/" /2" 9/" American Metric NONMAGNETIC Hex Size A Overall Length 3/" 3/" /4" /4" /4" /" /" /" /" /" /" /32" /32" 3/" 3/" 3/" 7/" 7/" 7/" /2" /2" 4mm mm " 3" /" 2 9 /" 3" /" 2 9 /" 2" 3" 4" " 2" 3" 7 /" 2" 2 9 /" 2" 3" " 2" 3" 2 9 /" 2 9 /" Socket Body Diameter B /" /" 7/" 7/" 7/" /2" /2" /2" /2" /2" /2" 9/" 9/" 9/" 9/" 9/" 2/32" 2/32" 2/32" 3/4" 3/4" /32" /32" Bit Holders & Nut Setters.4

17 Power Bits For use with ALL Drivers TORXALIGN WEDGE A Overall Length /" B POZIDRIVE Drive /" OL Size PQ* OPZD PZD 2PZD 3PZD A" (Dia.) 2 3 /4" OL 3" OL 3 /2" OL PQ* PQ* PQ* *OL = Overall Length *PQ = Package Quantity " OL PQ* A" / 3/ /4 /4 Drive Size T T7 T T9 T0 T T20 T2 T27 T A" Package B" Quantity BALLPOINT (hex) Overall Length 3"/ 7mm TORX B A" (Dia.) American Metric Hex Size /4" 3/32" 7/4" /" 9/4" /32" 3/" 7/32" /4" /" 3/" /2" 2mm 2.mm 3mm 4mm mm mm mm 0mm 2mm Cap Screw Size /4 / 3/ 7/, /2 / M2. M3 M4 M M M M0 M2 M4 Set Screw Size 0 /4 / 3/ 7/ /2 / 3/4 7/ M4 M M M M0 M2 M M / M20 M / M24 Package Quantity Drive Size T T2 T3 T4 T T T7 T T9 T0 T T20 T2 T27 T T40 /" OL 2 3 /4" OL 3 /2" OL " OL PQ* PQ* PQ* PQ* *OL = Overall Length *PQ = Package Quantity A" B" POWER BITS Mountz MC4 catalog Copyright 2009 all rights reserved

18 TORXSET Overall Length /4" SLOTTED B" (approx. blade thickness) A" (Dia.) Screw Size TS2 TS4 TS Package Quantity Screw Size F2R 2F3R 3F4R 4FR FR F7R F0R 0F2R 2F4R /" OL Item# PQ* /4" OL 3" OL PQ* PQ* *OL = Overall Length 3 /2" OL 4" OL " OL PQ* PQ* PQ* *PQ = Package Quantity A" B" PHILLIPS A" (Dia.) SOCKET HEAD (allen type) Overall Length /"/ 49mm Point /" OL Size Item# PQ* O Point Size O 2 3 Screw Size /4" OL 3" OL 3 /2" OL 4" OL PQ* PQ* PQ* PQ* *OL = Overall Length *PQ = Package Quantity Flat Oval Binding Machine Screws Round Fillster TrussBrazier Button " OL PQ* A" / 3/ /4 /4 American Metric Hex Size /" 20 /4" 20 3/32" 207 7/4" 202 /" 209 9/4" 2070 /32" 207 3/" 2072 /4" 2074 /" 290.mm mm mm mm mm 204 mm 204 mm 2034 mm 2049 Cap Screw Size /4 / / M. / M2 M2.3 / M2. / M2. M3 M4 M M M M0 Set Screw Size 0 /4 / 3/ /2 / M3 M4 M M M M0 M2 M Package Quantity ISO 900and ISO 702 Company POWER BITS.

19

20 InLine Pulse Tools Auto ShutOff & Non ShutOff KEY FEATURES Various models that range from 47 N.m Designed to enhance cycle time with highspeed rundown. Excellent powertoweight ratio. Safe ergonomic selection low noise decibels, minimal vibration & reaction free operation. Comfortable rubberized nonslip grips for easy handling and excellent thermal ergonomics. Specially designed pulse fluid extends life between oil changes provides better stability. Double sealing increases performance reduces maintenance. Shutoff and non shutoff models. Ergonomically safer than harmful hammering and vibration of impact wrenches. Widest ranged pulse tool on market for easy tool specification. NOTE! Sleeve drive sockets should be used with impact or pulse tools that accept an extended shaft sleeve type socket. Sleeve drive sockets provide more stability and prevent wobble and distortion. Contact Mountz for a sample or demonstration so you can see and feel the difference of a sleeve drive socket. All specified torque ranges were established statically on a Mountz (TorqueLab LTT Series) torque meter at a dynamic air pressure of 70 and PSI (LBS per Square Inch). The specified results should be used as guidance only in tool selection. In general, the torque range will be lower based on type of joint, air pressure, extension bars and/or extended sockets. A pulse tool is a discontinuous tool and added adapters or extensions create a dampening effect, thus lowering torque values. Tool selection as well as set up is recommended to be validated on the actual joint by use of a suitable calibrated torque wrench. We recommend a quality Mountz Digital torque wrench. AUTO SHUTOFF FLEXSSX 30 FLEXS40SX 30 FLEXS40S 3024 FLEXS0SX 302 FLEXS0S 302 FLEXS0SX 3027 FLEXS0S 302 FLEXS70S 3029 NON SHUTOFF FLEXSX 30 FLEX40SX 303 FLEX40S 3032 FLEX0SX 3033 FLEX0S 3034 FLEX0SX 303 FLEX0S 303 FLEX70S 3037 Drive Type /4" F/Hex /4" F/Hex 3/" Sq Dr /4" F/Hex 3/" Sq Dr /4" F/Hex 3/" Sq Dr 3/" Sq Dr Torque (N.m) psi Min. Max Torque (N.m) psi Min. Max Free Speed (RPM) kg/cm2 psi AUTO SHUTOFF FLEXSSX FLEXS40SX FLEXS40S FLEXS0SX FLEXS0S FLEXS0SX FLEXS0S FLEXS70S NON SHUTOFF FLEXSX FLEX40SX FLEX40S FLEX0SX FLEX0S FLEX0SX FLEX0S FLEX70S Weight lbs. Kgs P/W Ratio Nm/Kgs Length in Noise Level dba Average Air Consumption m 3 /min. ft 3 /min. CFM CFM Hose Size mm..... InLine Pulse Mountz MC4 catalog Copyright 200 all rights reserved

21 Pistol Pulse Tools Auto ShutOff & Non ShutOff KEY FEATURES Various models that range from 4 N.m Designed to enhance cycle time with highspeed rundown. Excellent powertoweight ratio. Safe ergonomic selection low noise decibels, minimal vibration & reaction free operation. Comfortable rubberized nonslip grips for easy handling and excellent thermal ergonomics. Specially designed pulse fluid extends life between oil changes provides better stability. Double sealing increases performance reduces maintenance. Shutoff and non shutoff models. Ergonomically safer than harmful hammering and vibration of impact wrenches. AUTO SHUTOFF FLEXSPX 3000 FLEXS40PX 300 FLEXS40P 3002 FLEXS0PX 3003 FLEXS0P 3004 FLEXS0PX 300 FLEXS0P 300 FLEXS70P 3007 FLEXS90P 300 FLEXS00P 3009 FLEXSP 300 AUTO SHUTOFF FLEXSPX FLEXS40PX FLEXS40P FLEXS0PX FLEXS0P FLEXS0PX FLEXS0P FLEXS70P FLEXS90P FLEXS00P FLEXSP Pistol Pulse NON SHUTOFF FLEXPX FLEX40PX FLEX40P FLEX0PX FLEX0P FLEX0PX FLEX0P FLEX70P FLEX90P FLEX00P FLEXP NON SHUTOFF FLEXPX 30 FLEX40PX 302 FLEX40P 303 FLEX0PX 304 FLEX0P 30 FLEX0PX 30 FLEX0P 307 FLEX70P 30 FLEX90P 309 FLEX00P 3020 FLEXP 302 Weight lbs. Kgs P/W Ratio Nm/Kgs Drive Type /4" F/Hex /4" F/Hex 3/" Sq Dr /4" F/Hex 3/" Sq Dr /4" F/Hex 3/" Sq Dr 3/" Sq Dr /2" Sq Dr /2" Sq Dr /2" Sq Dr Length in Noise Level dba Torque (N.m) psi Min. Max Average Air Consumption m 3 /min. CFM ft 3 /min. CFM Hose Size mm..... Torque (N.m) psi Min. Max Mountz MC4 catalog Copyright Free Speed (RPM) kg/cm2 psi NOTE! Sleeve drive sockets should be used with impact or pulse tools that accept an extended shaft sleeve type socket. Sleeve drive sockets provide more stability and prevent wobble and distortion. Contact Mountz for a sample or demonstration so you can see and feel the difference of a sleeve drive socket. All specified torque ranges were established statically on a Mountz (TorqueLab LTT Series) torque meter at a dynamic air pressure of 70 and PSI (LBS per Square Inch). The specified results should be used as guidance only in tool selection. In general, the torque range will be lower based on type of joint, air pressure, extension bars and/or extended sockets. A pulse tool is a discontinuous tool and added adapters or extensions create a dampening effect, thus lowering torque values. Tool selection as well as set up is recommended to be validated on the actual joint by use of a suitable calibrated torque wrench. We recommend a quality Mountz Digital torque wrench. 200 all rights reserved

22 RightAngle Pulse Tools Auto ShutOff & Non ShutOff KEY FEATURES Various models that range from. 0 N.m Designed to enhance cycle time with highspeed rundown. Excellent powertoweight ratio. Safe ergonomic selection low noise decibels, minimal vibration & reaction free operation. Comfortable rubberized nonslip grips for easy handling and excellent thermal ergonomics. Specially designed pulse fluid extends life between oil changes provides better stability. Double sealing increases performance reduces maintenance. Shutoff and non shutoff models. Ergonomically safer than harmful hammering and vibration of impact wrenches. NOTE! Right Angle Pulse tools should use Standard Impact Sockets. All specified torque ranges were established statically on a Mountz (TorqueLab LTT Series) torque meter at a dynamic air pressure of 70 and PSI (LBS per Square Inch). The specified results should be used as guidance only in tool selection. In general, the torque range will be lower based on type of joint, air pressure, extension bars and/or extended sockets. A pulse tool is a discontinuous tool and added adapters or extensions create a dampening effect, thus lowering torque values. Tool selection as well as set up is recommended to be validated on the actual joint by use of a suitable calibrated torque wrench. We recommend a quality Mountz Digital torque wrench. AUTO SHUTOFF FLEXS0RX 304 FLEXS0R 303 FLEXS0RX 304 FLEXS0R 3039 FLEXS70RX 3047 FLEXS70R 3040 FLEXS70RH 3044 NON SHUTOFF FLEX0RX 304 FLEX0R 304 FLEX0RX 3049 FLEX0R 3042 FLEX70RX 300 FLEX70R 30 FLEX70RH 30 Drive Type /4" F/Hex 3/" Sq Dr /4" F/Hex 3/" Sq Dr /4" F/Hex 3/" Sq Dr /2" Sq Dr Torque (N.m) psi Min. Max Torque (N.m) psi Min. Max Free Speed (RPM) kg/cm2 psi AUTO SHUTOFF FLEXS0RX FLEXS0R FLEXS0RX FLEXS0R FLEXS70RX FLEXS70R FLEXS70RH NON SHUTOFF FLEX0RX FLEX0R FLEX0RX FLEX0R FLEX70RX FLEX70R FLEX70RH Weight lbs. Kgs P/W Ratio Nm/Kgs Length in Noise Level dba Average Air Consumption m 3 /min. ft 3 /min. CFM CFM Hose Size mm.. RightAngle Pulse Mountz MC4 catalog Copyright 200 all rights reserved

23 Sleeve Drive Impact Sockets Impact & Pulse Tools KEY FEATURES Sleeve drive sockets provide stability and prevent wobble and distortion. Less vibration reduces wear on the critical components of the pulse tool. Sleeve drive sockets should be used with an impact or pulse tool that accepts extended shaft sleeve type sockets. 3/" Sq. Dr. ( Point Sockets) AMERICAN D2 D L2 Size mm mm mm /4" /" 3/" 7/" /2" 9/" /" /" 3/4" 3/" 7/" /" " /" /" Sq. Dr. ( Point Sockets) METRIC D2 D L2 Size mm mm mm Sleeve Drive Impact Sockets L mm L mm /2" Sq. Dr. ( Point Sockets) AMERICAN D2 D L2 Size mm mm mm /4" /" 3/" 7/" /2" 9/" /" /" 3/4" 3/" 7/" /" " /" /" 3/" /4" /" 3/" 7/" /2" L mm NOTE! Sleeve sockets also available in extended lengths with and without magnet, hex bit, Torx, External Torx, stud setter and quick release chuck types. Please inquire for sizes and availability. Point Socket Extension Bar /2" Sq. Dr. ( Point Sockets) METRIC D2 D L2 Size mm mm mm Extension Bars Input Drive Output Drive 3/" 3/" 3/" /2" /2" /2" /" 3/" 3/" /2" /2" /2" Mountz MC4 catalog Copyright D2 mm L mm L mm Male End Type Pin Hole Pin Hole Pin Hole Pin Hole Pin Hole Pin Hole 200 all rights reserved

24 Pulse Tool Reference Guide PULSE TOOL SELECTION REFERENCE GUIDE BOLT SIZE AUTO SHUTOFF FLEXS40P FLEXS0P FLEXS0P FLEXS70P FLEXS90P FLEXS00P FLEXSP FLEXSPX FLEXS40PX FLEXS0PX FLEXS0PX FLEXS40S FLEXS0S FLEXS0S FLEXS70S FLEXSSX FLEXS40SX FLEXS0SX FLEXS0SX FLEXS0R FLEXS0R FLEXS70R FLEXS70RH FLEXS0RX FLEXS0RX FLEXS70RX NON SHUTOFF M M M M0 M2 M4 FLEX40P FLEX0P FLEX0P FLEX70P FLEX90P FLEX00P FLEXP FLEXPX FLEX40PX FLEX0PX FLEX0PX FLEX40S FLEX0S FLEX0S FLEX70S FLEXSX FLEX40SX FLEX0SX FLEX0SX FLEX0R FLEX0R FLEX70R FLEX70RH FLEX0RX FLEX0RX FLEX70RX 0NM 9NM 3NM 27NM 20NM 3NM 34NM 7NM 7NM 90NM 7NM 20NM 3NM 4NM NM 2.NM 9NM NM 2NM 2NM NM NM 0NM 9NM 3NM 27NM 20NM 3NM 34NM 7NM NM 2.NM 9NM NM 2NM 2NM NM NM 9.NM 7NM 4NM 24NM 20NM 3NM 40NM 0NM.NM NM 2NM NM 40NM 0NM HARD JOINT APPLICATIONS The auto shutoff pulse tools normally reach % of the maximum torque listed in the torque range. The non shutoff pulse tools normally reach 9% of the maximum torque listed in the torque range. SOFT JOINT APPLICATIONS The auto shutoff pulse tools normally reach 70% of the maximum torque listed in the torque range. The non shutoff pulse tools normally reach 90% of the maximum torque listed in the torque range. USE THE PROPER PRESSURE 70 PSI PSI ACCESSORIES SELECTION NOTES All specified torque ranges were established statically on a Mountz (TorqueLab LTT Series) torque meter at a dynamic air pressure of 70 and PSI (LBS per Square Inch). The specified results should be used as guidance only in tool in tool selection. In general, the torque range will be lower based on type of joint, air pressure, extension bars and/or extended sockets. A pulse tool is a discontinuous tool and added adapters or extensions create a dampening effect, thus lowering torque values. Tool selection as well as set up is recommended to be validated on the actual joint by use of a suitable calibrated torque wrench. We recommend a quality Mountz Digital torque wrench. Sleeve Drive Impact Sockets (except for Right Angle models) See Page.2 CALIBRATION METHOD RECOMMENDED The range vary according to joint specification. Recommended use static torque tester LTT or PTT with BMX and measure the residual torque with a Mountz Digital Torque Wrench to validate the calibration procedure. ISO 900and ISO 702 Company Pulse Tool Reference Guide.

25 Ask a Mountz customer service representative for a copy of our otrher Catalogs. ASSEMBLY POWER TOOL CATALOG MC4 Available in Print or PDF format, 7 page CORPORATE HEADQUARTERS 00 North th Street San Jose CA 92 t t f sales@etorque.com DISTRIBUTION & SERVICE CENTER 90 Underwood Road Foley AL 33 t f TORQUE ANALYZER & TEST MEASUREMENT CATALOG MC4 Available in Print or PDF format, 24 page US & CANADA SALES OFFICES Anaheim, Boston, Charlotte, Chicago, Cleveland, Dallas, El Paso, Los Angeles, Minneapolis, Nashville, Phoenix, Seattle, San Jose, Toronto MOUNTZ MEXICO SA de CV MAIN OFFICE & SERVICE CENTER Av. Cristobal Colon #3 Col. Paseos de Chihuahua Chihuahua, Chih. Mexico CP 32 t f MEXICO SALES OFFICES Tijuana, Cd. Juarez, Chihuaha, Reynosa, Monterrey, Mexico DF, Guadalajara TORQUE MULTIPLIER CATALOG MC4 Available in PDF format only, 24 page Mountz MC4 catalog Copyright 2009 all rights reserved