SPECIFICATIONS DGW400DMC-400. File _DGW400DMC_SA20

Transcription

1 SPECIFICATIONS DGW400DMC-400 File _DGW400DMC_SA20

2 CONTENTS CHAPTER 1: GENERAL 1 1. Standards 2. Design Conditions 3. Test and Check 4. Painting 5. Structure CHAPTER 2: SPECIFICATIONS 2 CHAPTER 3: EQUIPMENT AND FEATURE 3 1. Equipment (1) Generator (2) Welder (3) Others 2. Feature (1) Feature (2) Protection Device 4 (3) Accessories CHAPTER 4: APPEARANCE 5 File _DGW400DMC_SA20

3 CHAPTER 1: GENERAL 1. Standards Design and production are in conformity with: (1) Japan Industrial Standards: JIS C (2) Low Noise Type Construction Machinery Standard by Ministry of Construction (Equivalent) (3) Voluntary Emission Regulations for non-road engines in Japan by LEMA. (Tier 3) *LEMA stands of Japan Land Engine Manufacturers Association 2. Design Conditions (1) Installation Place: Outside (2) Ambient Temperature: -15 to +40 (3) Humidity: Less than 80% (4) Altitude: Less than 300 meters above sea level 3. Test and Check Test shall be done with a complete workable unit of the diesel engine unit. (1) Check Items 4. Painting a) Insulation and Dielectric Test b) Starting c) Protection Device Working Test d) Voltage Deviation and Speed Variation: 0-4/4 Load e) Load Test: Welding and Generating 4/4 Load Painting and color specifications are as per manufacturer s standard. 5. Structure (1) Vibration Proof Device Alternator is directly coupled with engine and both are installed on the bed through the vibration proof device. (2) Low Noise Low noise structure is put in the inside of the bonnet. Sound Level: distance (3) Fuel Tank A steel fuel tank is equipped and incorporated with the electrical level gauge. 1

4 CHAPTER 2: SPECIFICATIONS Model DGW400DMC-400 Generating Method Rotating Field AC Generator Welding DC Generator Operation Single Dual Rated Current (A) 370/ /200 Rated Voltage (V) 34.8/ /28.0 Duty Cycle (%) Current Adj. Range (A) / / Welding Rod (mm) Ø2.6-Ø 8.0 Ø 2.0-Ø4.0 Rated Speed (min -1 ) 3000/3600 No Load Voltage (V) MAX 85 Rated Frequency (Hz) 50/60 Rated Speed (min -1 ) 3000/3600 Phase 1-Phase 3-Phase Rated Voltage (V) 230/ /440 Rated Current (A) 15A 3 20 Power Factor Rated Output (kva) 9.6/ /15 Rating Continuous Model Kubota D902 Type Vertical, Water-Cooled 4-Cycle Diesel Engine Displacement (L) Rated Output (kw/min -1 ) 15.0/ /3600 Engine Battery Fuel Lubricant Oil Lubrication Oil Volume Cooling Water Volume Starting Method ASTM No.2-D Diesel Fuel or Equivalent API Class CD or Higher (L) 3.6 (Effective 1.7) (L) 4.0 (Sub Tank Capacity 0.6 L included) Starter Motor 46B24L (Japanese Industrial Standard) Fuel Tank Capacity (L) 37 Dimensions Length (mm) 1457 Width (mm) 635 Height (mm) 778 Dry Weight (kg) 430 *Specifications subject to change without notice. 2

5 CHAPTER 3: EQUIPMENT AND FEATURE 1. Equipment (1) Generator Digital Display...1 piece Voltage meter Ampere meter Frequency meter Breaker...1 piece With Leakage Shut off Device: 30mA 0.1 second 1-Phase 250V Receptacle...3 pieces 3-Phase 440V Receptacle...1 piece Voltage Adjustment Volume...1 piece Earth Leakage Grounding Terminal...1 piece (2) Welder Current Adjusting Dial...1 piece Output Control Dial...1 piece Welding Current Output Terminal (with a protective cover)...1 set (3) Others Idle Control Switch...1 piece Starter Switch...1 piece Bonnet Grounding Terminal...1 piece Monitor Lamp...1 set Water Temperature Battery Charge Oil Pressure Pre Heat Overheat Spill Container Fuel Volume 2. Feature (1) Feature Welding Performance Pre dial Current and Voltage Control System Sound Level Super Silenced, 57dB(A) at Eco mode Generating Performance 3 x 15A Single Phase Outlets and 1 x 20A Three Phase Outlets -Earth Leakage Protected VRD* Standard Environmental Voluntary Emission Regulations in Japan by LEMA (Tier 3) Large Tank 37 Liters Fuel Tank Standard Compact and Light Wt. 430kg**, 1457mm x 635mm x 778mm *VRD: Voltage Reduction Device **Dry Weight 3

6 (2) Protection Device Item Standard Monitor Lamp Trip Engine Shut-Down Low Oil Pressure 98.1kPa - High Water Temperature Insufficient Charging - - Over Current 15A - Current Leakage 30mA 0.1sec. - VRD Std (3) Accessories Owner s & Operator s Manual 1 copy 4

7 CHAPTER 4: APPEARANCE 5

8 YAMABIKO CORPORATION 35 SHIN-UJIGAMI, KITA-HIROSHIMA-CHO, YAMAGATA-GUN, HIROSHIMA JAPAN Telephone: (81) Fax: (81)